* [GIT PULL] phy: for 4.7
@ 2016-05-02 4:22 Kishon Vijay Abraham I
2016-05-02 4:22 ` [PATCH 01/16] phy: rcar-gen2: add fallback binding Kishon Vijay Abraham I
` (16 more replies)
0 siblings, 17 replies; 18+ messages in thread
From: Kishon Vijay Abraham I @ 2016-05-02 4:22 UTC (permalink / raw)
To: gregkh; +Cc: kishon, linux-kernel
Hi Greg,
Please find below the pull request for 4.7 merge window.
It adds a new PHY driver for USB2 PHY on Northstar SoC and
reuses existing PHY drivers to add support for Broadcom NS2
SATA3 PHY, MIPI DPHYs in Exynos542x/Exynos5433 SoCs and
USB3 PHY on mt2701.
Let me know if I have to change something.
Thanks
Kishon
The following changes since commit 5128de85124c728cdbb6b35bd9dc7410f02c0ca1:
phy: rockchip-emmc: adapt binding to specifiy register offset and length (2016-04-13 18:33:05 +0530)
are available in the git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/kishon/linux-phy.git tags/phy-for-4.7
for you to fetch changes up to 71f5c63c07e5be7abdce40891778ffbf3cec04f0:
phy: exynos-mipi-video: Add support for Exynos 5420 and 5433 SoCs (2016-04-30 20:12:30 +0530)
----------------------------------------------------------------
phy: for 4.7
*) Add a new PHY driver for USB2 PHY on Northstar SoC
*) Add support for Broadcom NS2 SATA3 PHY in existing
Broadcom SATA3 PHY driver
*) Add support for MIPI DPHYs in Exynos5420-compatible
(5420, 5422 and 5800) and Exynos5433 SoCs
*) Add support for USB3 PHY on mt2701
*) Add extcon support for Renesas R-car USB2 PHY driver
*) Misc cleanups
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
----------------------------------------------------------------
Anup Patel (3):
phy: Rename phy-brcmstb-sata driver to phy-brcm-sata driver
phy: Add support for NS2 SATA3 PHY in Broadcom SATA3 PHY driver
dt-bindings: phy: bindings document for common Broadcom SATA3 PHY
driver
Chunfeng Yun (2):
dt-bindings: phy-mt65xx-usb: add support for mt2701 platform
phy: phy-mt65xx-usb3: add support for mt2701 platform
Marek Szyprowski (2):
phy: exynos-mipi-video: Rewrite handling of phy registers
phy: exynos-mipi-video: Add support for Exynos 5420 and 5433 SoCs
Rafał Miłecki (1):
phy: bcm-ns-usb2: new driver for USB 2.0 PHY on Northstar
Simon Horman (3):
phy: rcar-gen2: add fallback binding
phy: rcar-gen3-usb2: add fallback binding
phy: rcar-gen3-usb2, rcar-gen2: Use ARCH_RENESAS
Stephen Boyd (1):
phy: rockhip-usb: Remove CLK_IS_ROOT
Sylwester Nawrocki (1):
phy: exynos-mipi-video: Drop support for direct access to PMU
Yoshihiro Shimoda (3):
phy: rcar-gen3-usb2: remove unnecesary struct rcar_gen3_data
phy: rcar-gen3-usb2: Add vbus-supply to handle VBUS on/off
phy: rcar-gen3-usb2: add extcon support
.../devicetree/bindings/phy/bcm-ns-usb2-phy.txt | 21 +
...brcm,brcmstb-sata-phy.txt => brcm-sata-phy.txt} | 15 +-
.../devicetree/bindings/phy/phy-mt65xx-usb.txt | 4 +-
.../devicetree/bindings/phy/rcar-gen2-phy.txt | 8 +-
.../devicetree/bindings/phy/rcar-gen3-phy-usb2.txt | 12 +-
.../devicetree/bindings/phy/samsung-phy.txt | 18 +-
drivers/phy/Kconfig | 30 +-
drivers/phy/Makefile | 3 +-
drivers/phy/phy-bcm-ns-usb2.c | 137 +++++++
drivers/phy/phy-brcm-sata.c | 412 ++++++++++++++++++++
drivers/phy/phy-brcmstb-sata.c | 250 ------------
drivers/phy/phy-exynos-mipi-video.c | 321 ++++++++++++---
drivers/phy/phy-mt65xx-usb3.c | 77 ++--
drivers/phy/phy-rcar-gen2.c | 1 +
drivers/phy/phy-rcar-gen3-usb2.c | 88 ++++-
drivers/phy/phy-rockchip-usb.c | 2 +-
include/linux/bcma/bcma.h | 1 +
include/linux/bcma/bcma_driver_arm_c9.h | 15 +
include/linux/mfd/syscon/exynos5-pmu.h | 3 +
19 files changed, 1035 insertions(+), 383 deletions(-)
create mode 100644 Documentation/devicetree/bindings/phy/bcm-ns-usb2-phy.txt
rename Documentation/devicetree/bindings/phy/{brcm,brcmstb-sata-phy.txt => brcm-sata-phy.txt} (69%)
create mode 100644 drivers/phy/phy-bcm-ns-usb2.c
create mode 100644 drivers/phy/phy-brcm-sata.c
delete mode 100644 drivers/phy/phy-brcmstb-sata.c
create mode 100644 include/linux/bcma/bcma_driver_arm_c9.h
--
1.7.9.5
^ permalink raw reply [flat|nested] 18+ messages in thread
* [PATCH 01/16] phy: rcar-gen2: add fallback binding
2016-05-02 4:22 [GIT PULL] phy: for 4.7 Kishon Vijay Abraham I
@ 2016-05-02 4:22 ` Kishon Vijay Abraham I
2016-05-02 4:22 ` [PATCH 02/16] phy: rcar-gen3-usb2: " Kishon Vijay Abraham I
` (15 subsequent siblings)
16 siblings, 0 replies; 18+ messages in thread
From: Kishon Vijay Abraham I @ 2016-05-02 4:22 UTC (permalink / raw)
To: gregkh; +Cc: kishon, linux-kernel
From: Simon Horman <horms+renesas@verge.net.au>
In the case of Renesas R-Car hardware we know that there are generations of
SoCs, e.g. Gen 2 and Gen 3. But beyond that its not clear what the
relationship between IP blocks might be. For example, I believe that
r8a7790 is older than r8a7791 but that doesn't imply that the latter is a
descendant of the former or vice versa.
We can, however, by examining the documentation and behaviour of the
hardware at run-time observe that the current driver implementation appears
to be compatible with the IP blocks on SoCs within a given generation.
For the above reasons and convenience when enabling new SoCs a
per-generation fallback compatibility string scheme being adopted for
drivers for Renesas SoCs.
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
---
.../devicetree/bindings/phy/rcar-gen2-phy.txt | 8 +++++++-
drivers/phy/phy-rcar-gen2.c | 1 +
2 files changed, 8 insertions(+), 1 deletion(-)
diff --git a/Documentation/devicetree/bindings/phy/rcar-gen2-phy.txt b/Documentation/devicetree/bindings/phy/rcar-gen2-phy.txt
index d564ba4..91da947 100644
--- a/Documentation/devicetree/bindings/phy/rcar-gen2-phy.txt
+++ b/Documentation/devicetree/bindings/phy/rcar-gen2-phy.txt
@@ -7,6 +7,12 @@ Required properties:
- compatible: "renesas,usb-phy-r8a7790" if the device is a part of R8A7790 SoC.
"renesas,usb-phy-r8a7791" if the device is a part of R8A7791 SoC.
"renesas,usb-phy-r8a7794" if the device is a part of R8A7794 SoC.
+ "renesas,rcar-gen2-usb-phy" for a generic R-Car Gen2 compatible device.
+
+ When compatible with the generic version, nodes must list the
+ SoC-specific version corresponding to the platform first
+ followed by the generic version.
+
- reg: offset and length of the register block.
- #address-cells: number of address cells for the USB channel subnodes, must
be <1>.
@@ -34,7 +40,7 @@ the USB channel; see the selector meanings below:
Example (Lager board):
usb-phy@e6590100 {
- compatible = "renesas,usb-phy-r8a7790";
+ compatible = "renesas,usb-phy-r8a7790", "renesas,rcar-gen2-usb-phy";
reg = <0 0xe6590100 0 0x100>;
#address-cells = <1>;
#size-cells = <0>;
diff --git a/drivers/phy/phy-rcar-gen2.c b/drivers/phy/phy-rcar-gen2.c
index c7a0599..97d4dd6 100644
--- a/drivers/phy/phy-rcar-gen2.c
+++ b/drivers/phy/phy-rcar-gen2.c
@@ -195,6 +195,7 @@ static const struct of_device_id rcar_gen2_phy_match_table[] = {
{ .compatible = "renesas,usb-phy-r8a7790" },
{ .compatible = "renesas,usb-phy-r8a7791" },
{ .compatible = "renesas,usb-phy-r8a7794" },
+ { .compatible = "renesas,rcar-gen2-usb-phy" },
{ }
};
MODULE_DEVICE_TABLE(of, rcar_gen2_phy_match_table);
--
1.7.9.5
^ permalink raw reply related [flat|nested] 18+ messages in thread
* [PATCH 02/16] phy: rcar-gen3-usb2: add fallback binding
2016-05-02 4:22 [GIT PULL] phy: for 4.7 Kishon Vijay Abraham I
2016-05-02 4:22 ` [PATCH 01/16] phy: rcar-gen2: add fallback binding Kishon Vijay Abraham I
@ 2016-05-02 4:22 ` Kishon Vijay Abraham I
2016-05-02 4:22 ` [PATCH 03/16] phy: rcar-gen3-usb2, rcar-gen2: Use ARCH_RENESAS Kishon Vijay Abraham I
` (14 subsequent siblings)
16 siblings, 0 replies; 18+ messages in thread
From: Kishon Vijay Abraham I @ 2016-05-02 4:22 UTC (permalink / raw)
To: gregkh; +Cc: kishon, linux-kernel
From: Simon Horman <horms+renesas@verge.net.au>
In the case of Renesas R-Car hardware we know that there are generations of
SoCs, e.g. Gen 2 and Gen 3. But beyond that its not clear what the
relationship between IP blocks might be. For example, I believe that
r8a7790 is older than r8a7791 but that doesn't imply that the latter is a
descendant of the former or vice versa.
We can, however, by examining the documentation and behaviour of the
hardware at run-time observe that the current driver implementation appears
to be compatible with the IP blocks on SoCs within a given generation.
For the above reasons and convenience when enabling new SoCs a
per-generation fallback compatibility string scheme being adopted for
drivers for Renesas SoCs.
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Rob Herring <robh@kernel.org>
Acked-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
---
.../devicetree/bindings/phy/rcar-gen3-phy-usb2.txt | 10 ++++++++--
drivers/phy/phy-rcar-gen3-usb2.c | 1 +
2 files changed, 9 insertions(+), 2 deletions(-)
diff --git a/Documentation/devicetree/bindings/phy/rcar-gen3-phy-usb2.txt b/Documentation/devicetree/bindings/phy/rcar-gen3-phy-usb2.txt
index eaf7e9b..f9511ad 100644
--- a/Documentation/devicetree/bindings/phy/rcar-gen3-phy-usb2.txt
+++ b/Documentation/devicetree/bindings/phy/rcar-gen3-phy-usb2.txt
@@ -6,6 +6,12 @@ This file provides information on what the device node for the R-Car generation
Required properties:
- compatible: "renesas,usb2-phy-r8a7795" if the device is a part of an R8A7795
SoC.
+ "renesas,rcar-gen3-usb2-phy" for a generic R-Car Gen3 compatible device.
+
+ When compatible with the generic version, nodes must list the
+ SoC-specific version corresponding to the platform first
+ followed by the generic version.
+
- reg: offset and length of the partial USB 2.0 Host register block.
- clocks: clock phandle and specifier pair(s).
- #phy-cells: see phy-bindings.txt in the same directory, must be <0>.
@@ -19,14 +25,14 @@ channel as USB OTG:
Example (R-Car H3):
usb-phy@ee080200 {
- compatible = "renesas,usb2-phy-r8a7795";
+ compatible = "renesas,usb2-phy-r8a7795", "renesas,rcar-gen3-usb2-phy";
reg = <0 0xee080200 0 0x700>;
interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp7_clks R8A7795_CLK_EHCI0>;
};
usb-phy@ee0a0200 {
- compatible = "renesas,usb2-phy-r8a7795";
+ compatible = "renesas,usb2-phy-r8a7795", "renesas,rcar-gen3-usb2-phy";
reg = <0 0xee0a0200 0 0x700>;
clocks = <&mstp7_clks R8A7795_CLK_EHCI0>;
};
diff --git a/drivers/phy/phy-rcar-gen3-usb2.c b/drivers/phy/phy-rcar-gen3-usb2.c
index bc4f7dd..257be74 100644
--- a/drivers/phy/phy-rcar-gen3-usb2.c
+++ b/drivers/phy/phy-rcar-gen3-usb2.c
@@ -251,6 +251,7 @@ static irqreturn_t rcar_gen3_phy_usb2_irq(int irq, void *_ch)
static const struct of_device_id rcar_gen3_phy_usb2_match_table[] = {
{ .compatible = "renesas,usb2-phy-r8a7795" },
+ { .compatible = "renesas,rcar-gen3-usb2-phy" },
{ }
};
MODULE_DEVICE_TABLE(of, rcar_gen3_phy_usb2_match_table);
--
1.7.9.5
^ permalink raw reply related [flat|nested] 18+ messages in thread
* [PATCH 03/16] phy: rcar-gen3-usb2, rcar-gen2: Use ARCH_RENESAS
2016-05-02 4:22 [GIT PULL] phy: for 4.7 Kishon Vijay Abraham I
2016-05-02 4:22 ` [PATCH 01/16] phy: rcar-gen2: add fallback binding Kishon Vijay Abraham I
2016-05-02 4:22 ` [PATCH 02/16] phy: rcar-gen3-usb2: " Kishon Vijay Abraham I
@ 2016-05-02 4:22 ` Kishon Vijay Abraham I
2016-05-02 4:22 ` [PATCH 04/16] phy: Rename phy-brcmstb-sata driver to phy-brcm-sata driver Kishon Vijay Abraham I
` (13 subsequent siblings)
16 siblings, 0 replies; 18+ messages in thread
From: Kishon Vijay Abraham I @ 2016-05-02 4:22 UTC (permalink / raw)
To: gregkh; +Cc: kishon, linux-kernel
From: Simon Horman <horms+renesas@verge.net.au>
Make use of ARCH_RENESAS in place of ARCH_SHMOBILE.
A now redundant dependency on OF is also dropped.
This is part of an ongoing process to migrate from ARCH_SHMOBILE to
ARCH_RENESAS the motivation for which being that RENESAS seems to be a more
appropriate name than SHMOBILE for the majority of Renesas ARM based SoCs.
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Acked-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
---
drivers/phy/Kconfig | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/phy/Kconfig b/drivers/phy/Kconfig
index 26566db..08f790a 100644
--- a/drivers/phy/Kconfig
+++ b/drivers/phy/Kconfig
@@ -113,14 +113,14 @@ config PHY_MIPHY365X
config PHY_RCAR_GEN2
tristate "Renesas R-Car generation 2 USB PHY driver"
- depends on ARCH_SHMOBILE
+ depends on ARCH_RENESAS
depends on GENERIC_PHY
help
Support for USB PHY found on Renesas R-Car generation 2 SoCs.
config PHY_RCAR_GEN3_USB2
tristate "Renesas R-Car generation 3 USB 2.0 PHY driver"
- depends on OF && ARCH_SHMOBILE
+ depends on ARCH_RENESAS
select GENERIC_PHY
help
Support for USB 2.0 PHY found on Renesas R-Car generation 3 SoCs.
--
1.7.9.5
^ permalink raw reply related [flat|nested] 18+ messages in thread
* [PATCH 04/16] phy: Rename phy-brcmstb-sata driver to phy-brcm-sata driver
2016-05-02 4:22 [GIT PULL] phy: for 4.7 Kishon Vijay Abraham I
` (2 preceding siblings ...)
2016-05-02 4:22 ` [PATCH 03/16] phy: rcar-gen3-usb2, rcar-gen2: Use ARCH_RENESAS Kishon Vijay Abraham I
@ 2016-05-02 4:22 ` Kishon Vijay Abraham I
2016-05-02 4:22 ` [PATCH 05/16] phy: Add support for NS2 SATA3 PHY in Broadcom SATA3 PHY driver Kishon Vijay Abraham I
` (12 subsequent siblings)
16 siblings, 0 replies; 18+ messages in thread
From: Kishon Vijay Abraham I @ 2016-05-02 4:22 UTC (permalink / raw)
To: gregkh; +Cc: kishon, linux-kernel
From: Anup Patel <anup.patel@broadcom.com>
Currently, we have a common SATA3 PHY driver for all Broadcom
STB SoCs. This driver can be extended and re-used for Broadcom
iProc SoCs having same SATA3 PHY.
This patch renames existing Broadcom STB SATA3 PHY driver to
common Broadcom SATA3 PHY driver to share this PHY driver across
Broadcom SoCs.
Signed-off-by: Anup Patel <anup.patel@broadcom.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
---
drivers/phy/Kconfig | 18 +++++++++---------
drivers/phy/Makefile | 2 +-
.../phy/{phy-brcmstb-sata.c => phy-brcm-sata.c} | 8 ++++----
3 files changed, 14 insertions(+), 14 deletions(-)
rename drivers/phy/{phy-brcmstb-sata.c => phy-brcm-sata.c} (97%)
diff --git a/drivers/phy/Kconfig b/drivers/phy/Kconfig
index 08f790a..46bb2c2 100644
--- a/drivers/phy/Kconfig
+++ b/drivers/phy/Kconfig
@@ -403,15 +403,6 @@ config PHY_TUSB1210
help
Support for TI TUSB1210 USB ULPI PHY.
-config PHY_BRCMSTB_SATA
- tristate "Broadcom STB SATA PHY driver"
- depends on ARCH_BRCMSTB || BMIPS_GENERIC
- depends on OF
- select GENERIC_PHY
- help
- Enable this to support the SATA3 PHY on 28nm or 40nm Broadcom STB SoCs.
- Likely useful only with CONFIG_SATA_BRCMSTB enabled.
-
config PHY_CYGNUS_PCIE
tristate "Broadcom Cygnus PCIe PHY driver"
depends on OF && (ARCH_BCM_CYGNUS || COMPILE_TEST)
@@ -421,4 +412,13 @@ config PHY_CYGNUS_PCIE
Enable this to support the Broadcom Cygnus PCIe PHY.
If unsure, say N.
+config PHY_BRCM_SATA
+ tristate "Broadcom SATA PHY driver"
+ depends on ARCH_BRCMSTB || ARCH_BCM_IPROC || BMIPS_GENERIC || COMPILE_TEST
+ depends on OF
+ select GENERIC_PHY
+ default ARCH_BCM_IPROC
+ help
+ Enable this to support the Broadcom SATA PHY.
+ If unsure, say N.
endmenu
diff --git a/drivers/phy/Makefile b/drivers/phy/Makefile
index 24596a9..596fae9 100644
--- a/drivers/phy/Makefile
+++ b/drivers/phy/Makefile
@@ -49,6 +49,6 @@ obj-$(CONFIG_PHY_QCOM_UFS) += phy-qcom-ufs.o
obj-$(CONFIG_PHY_QCOM_UFS) += phy-qcom-ufs-qmp-20nm.o
obj-$(CONFIG_PHY_QCOM_UFS) += phy-qcom-ufs-qmp-14nm.o
obj-$(CONFIG_PHY_TUSB1210) += phy-tusb1210.o
-obj-$(CONFIG_PHY_BRCMSTB_SATA) += phy-brcmstb-sata.o
obj-$(CONFIG_PHY_PISTACHIO_USB) += phy-pistachio-usb.o
obj-$(CONFIG_PHY_CYGNUS_PCIE) += phy-bcm-cygnus-pcie.o
+obj-$(CONFIG_PHY_BRCM_SATA) += phy-brcm-sata.o
diff --git a/drivers/phy/phy-brcmstb-sata.c b/drivers/phy/phy-brcm-sata.c
similarity index 97%
rename from drivers/phy/phy-brcmstb-sata.c
rename to drivers/phy/phy-brcm-sata.c
index a23172f..c97b9d6 100644
--- a/drivers/phy/phy-brcmstb-sata.c
+++ b/drivers/phy/phy-brcm-sata.c
@@ -1,7 +1,7 @@
/*
* Broadcom SATA3 AHCI Controller PHY Driver
*
- * Copyright © 2009-2015 Broadcom Corporation
+ * Copyright (C) 2016 Broadcom
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -238,13 +238,13 @@ static struct platform_driver brcm_sata_phy_driver = {
.probe = brcm_sata_phy_probe,
.driver = {
.of_match_table = brcm_sata_phy_of_match,
- .name = "brcmstb-sata-phy",
+ .name = "brcm-sata-phy",
}
};
module_platform_driver(brcm_sata_phy_driver);
-MODULE_DESCRIPTION("Broadcom STB SATA PHY driver");
+MODULE_DESCRIPTION("Broadcom SATA PHY driver");
MODULE_LICENSE("GPL");
MODULE_AUTHOR("Marc Carino");
MODULE_AUTHOR("Brian Norris");
-MODULE_ALIAS("platform:phy-brcmstb-sata");
+MODULE_ALIAS("platform:phy-brcm-sata");
--
1.7.9.5
^ permalink raw reply related [flat|nested] 18+ messages in thread
* [PATCH 05/16] phy: Add support for NS2 SATA3 PHY in Broadcom SATA3 PHY driver
2016-05-02 4:22 [GIT PULL] phy: for 4.7 Kishon Vijay Abraham I
` (3 preceding siblings ...)
2016-05-02 4:22 ` [PATCH 04/16] phy: Rename phy-brcmstb-sata driver to phy-brcm-sata driver Kishon Vijay Abraham I
@ 2016-05-02 4:22 ` Kishon Vijay Abraham I
2016-05-02 4:22 ` [PATCH 06/16] dt-bindings: phy: bindings document for common " Kishon Vijay Abraham I
` (11 subsequent siblings)
16 siblings, 0 replies; 18+ messages in thread
From: Kishon Vijay Abraham I @ 2016-05-02 4:22 UTC (permalink / raw)
To: gregkh; +Cc: kishon, linux-kernel
From: Anup Patel <anup.patel@broadcom.com>
This patch adds support for Broadcom NS2 SATA3 PHY in existing
Broadcom SATA3 PHY driver.
Signed-off-by: Anup Patel <anup.patel@broadcom.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
---
drivers/phy/Kconfig | 19 ++--
drivers/phy/Makefile | 2 +-
drivers/phy/phy-brcm-sata.c | 238 ++++++++++++++++++++++++++++++++++++-------
3 files changed, 211 insertions(+), 48 deletions(-)
diff --git a/drivers/phy/Kconfig b/drivers/phy/Kconfig
index 46bb2c2..a72d73c 100644
--- a/drivers/phy/Kconfig
+++ b/drivers/phy/Kconfig
@@ -403,15 +403,6 @@ config PHY_TUSB1210
help
Support for TI TUSB1210 USB ULPI PHY.
-config PHY_CYGNUS_PCIE
- tristate "Broadcom Cygnus PCIe PHY driver"
- depends on OF && (ARCH_BCM_CYGNUS || COMPILE_TEST)
- select GENERIC_PHY
- default ARCH_BCM_CYGNUS
- help
- Enable this to support the Broadcom Cygnus PCIe PHY.
- If unsure, say N.
-
config PHY_BRCM_SATA
tristate "Broadcom SATA PHY driver"
depends on ARCH_BRCMSTB || ARCH_BCM_IPROC || BMIPS_GENERIC || COMPILE_TEST
@@ -421,4 +412,14 @@ config PHY_BRCM_SATA
help
Enable this to support the Broadcom SATA PHY.
If unsure, say N.
+
+config PHY_CYGNUS_PCIE
+ tristate "Broadcom Cygnus PCIe PHY driver"
+ depends on OF && (ARCH_BCM_CYGNUS || COMPILE_TEST)
+ select GENERIC_PHY
+ default ARCH_BCM_CYGNUS
+ help
+ Enable this to support the Broadcom Cygnus PCIe PHY.
+ If unsure, say N.
+
endmenu
diff --git a/drivers/phy/Makefile b/drivers/phy/Makefile
index 596fae9..f03fa1f 100644
--- a/drivers/phy/Makefile
+++ b/drivers/phy/Makefile
@@ -49,6 +49,6 @@ obj-$(CONFIG_PHY_QCOM_UFS) += phy-qcom-ufs.o
obj-$(CONFIG_PHY_QCOM_UFS) += phy-qcom-ufs-qmp-20nm.o
obj-$(CONFIG_PHY_QCOM_UFS) += phy-qcom-ufs-qmp-14nm.o
obj-$(CONFIG_PHY_TUSB1210) += phy-tusb1210.o
+obj-$(CONFIG_PHY_BRCM_SATA) += phy-brcm-sata.o
obj-$(CONFIG_PHY_PISTACHIO_USB) += phy-pistachio-usb.o
obj-$(CONFIG_PHY_CYGNUS_PCIE) += phy-bcm-cygnus-pcie.o
-obj-$(CONFIG_PHY_BRCM_SATA) += phy-brcm-sata.o
diff --git a/drivers/phy/phy-brcm-sata.c b/drivers/phy/phy-brcm-sata.c
index c97b9d6..6c4c5cb 100644
--- a/drivers/phy/phy-brcm-sata.c
+++ b/drivers/phy/phy-brcm-sata.c
@@ -14,6 +14,7 @@
* GNU General Public License for more details.
*/
+#include <linux/delay.h>
#include <linux/device.h>
#include <linux/init.h>
#include <linux/interrupt.h>
@@ -24,22 +25,26 @@
#include <linux/phy/phy.h>
#include <linux/platform_device.h>
-#define SATA_MDIO_BANK_OFFSET 0x23c
-#define SATA_MDIO_REG_OFFSET(ofs) ((ofs) * 4)
+#define SATA_PCB_BANK_OFFSET 0x23c
+#define SATA_PCB_REG_OFFSET(ofs) ((ofs) * 4)
#define MAX_PORTS 2
/* Register offset between PHYs in PCB space */
-#define SATA_MDIO_REG_28NM_SPACE_SIZE 0x1000
+#define SATA_PCB_REG_28NM_SPACE_SIZE 0x1000
/* The older SATA PHY registers duplicated per port registers within the map,
* rather than having a separate map per port.
*/
-#define SATA_MDIO_REG_40NM_SPACE_SIZE 0x10
+#define SATA_PCB_REG_40NM_SPACE_SIZE 0x10
+
+/* Register offset between PHYs in PHY control space */
+#define SATA_PHY_CTRL_REG_28NM_SPACE_SIZE 0x8
enum brcm_sata_phy_version {
- BRCM_SATA_PHY_28NM,
- BRCM_SATA_PHY_40NM,
+ BRCM_SATA_PHY_STB_28NM,
+ BRCM_SATA_PHY_STB_40NM,
+ BRCM_SATA_PHY_IPROC_NS2,
};
struct brcm_sata_port {
@@ -52,15 +57,48 @@ struct brcm_sata_port {
struct brcm_sata_phy {
struct device *dev;
void __iomem *phy_base;
+ void __iomem *ctrl_base;
enum brcm_sata_phy_version version;
struct brcm_sata_port phys[MAX_PORTS];
};
-enum sata_mdio_phy_regs {
- PLL_REG_BANK_0 = 0x50,
+enum sata_phy_regs {
+ BLOCK0_REG_BANK = 0x000,
+ BLOCK0_XGXSSTATUS = 0x81,
+ BLOCK0_XGXSSTATUS_PLL_LOCK = BIT(12),
+ BLOCK0_SPARE = 0x8d,
+ BLOCK0_SPARE_OOB_CLK_SEL_MASK = 0x3,
+ BLOCK0_SPARE_OOB_CLK_SEL_REFBY2 = 0x1,
+
+ PLL_REG_BANK_0 = 0x050,
PLL_REG_BANK_0_PLLCONTROL_0 = 0x81,
+ PLL1_REG_BANK = 0x060,
+ PLL1_ACTRL2 = 0x82,
+ PLL1_ACTRL3 = 0x83,
+ PLL1_ACTRL4 = 0x84,
+
+ OOB_REG_BANK = 0x150,
+ OOB_CTRL1 = 0x80,
+ OOB_CTRL1_BURST_MAX_MASK = 0xf,
+ OOB_CTRL1_BURST_MAX_SHIFT = 12,
+ OOB_CTRL1_BURST_MIN_MASK = 0xf,
+ OOB_CTRL1_BURST_MIN_SHIFT = 8,
+ OOB_CTRL1_WAKE_IDLE_MAX_MASK = 0xf,
+ OOB_CTRL1_WAKE_IDLE_MAX_SHIFT = 4,
+ OOB_CTRL1_WAKE_IDLE_MIN_MASK = 0xf,
+ OOB_CTRL1_WAKE_IDLE_MIN_SHIFT = 0,
+ OOB_CTRL2 = 0x81,
+ OOB_CTRL2_SEL_ENA_SHIFT = 15,
+ OOB_CTRL2_SEL_ENA_RC_SHIFT = 14,
+ OOB_CTRL2_RESET_IDLE_MAX_MASK = 0x3f,
+ OOB_CTRL2_RESET_IDLE_MAX_SHIFT = 8,
+ OOB_CTRL2_BURST_CNT_MASK = 0x3,
+ OOB_CTRL2_BURST_CNT_SHIFT = 6,
+ OOB_CTRL2_RESET_IDLE_MIN_MASK = 0x3f,
+ OOB_CTRL2_RESET_IDLE_MIN_SHIFT = 0,
+
TXPMD_REG_BANK = 0x1a0,
TXPMD_CONTROL1 = 0x81,
TXPMD_CONTROL1_TX_SSC_EN_FRC = BIT(0),
@@ -72,69 +110,183 @@ enum sata_mdio_phy_regs {
TXPMD_TX_FREQ_CTRL_CONTROL3_FMAX_MASK = 0x3ff,
};
-static inline void __iomem *brcm_sata_phy_base(struct brcm_sata_port *port)
+enum sata_phy_ctrl_regs {
+ PHY_CTRL_1 = 0x0,
+ PHY_CTRL_1_RESET = BIT(0),
+};
+
+static inline void __iomem *brcm_sata_pcb_base(struct brcm_sata_port *port)
{
struct brcm_sata_phy *priv = port->phy_priv;
- u32 offset = 0;
+ u32 size = 0;
+
+ switch (priv->version) {
+ case BRCM_SATA_PHY_STB_28NM:
+ case BRCM_SATA_PHY_IPROC_NS2:
+ size = SATA_PCB_REG_28NM_SPACE_SIZE;
+ break;
+ case BRCM_SATA_PHY_STB_40NM:
+ size = SATA_PCB_REG_40NM_SPACE_SIZE;
+ break;
+ default:
+ dev_err(priv->dev, "invalid phy version\n");
+ break;
+ };
- if (priv->version == BRCM_SATA_PHY_28NM)
- offset = SATA_MDIO_REG_28NM_SPACE_SIZE;
- else if (priv->version == BRCM_SATA_PHY_40NM)
- offset = SATA_MDIO_REG_40NM_SPACE_SIZE;
- else
+ return priv->phy_base + (port->portnum * size);
+}
+
+static inline void __iomem *brcm_sata_ctrl_base(struct brcm_sata_port *port)
+{
+ struct brcm_sata_phy *priv = port->phy_priv;
+ u32 size = 0;
+
+ switch (priv->version) {
+ case BRCM_SATA_PHY_IPROC_NS2:
+ size = SATA_PHY_CTRL_REG_28NM_SPACE_SIZE;
+ break;
+ default:
dev_err(priv->dev, "invalid phy version\n");
+ break;
+ };
- return priv->phy_base + (port->portnum * offset);
+ return priv->ctrl_base + (port->portnum * size);
}
-static void brcm_sata_mdio_wr(void __iomem *addr, u32 bank, u32 ofs,
- u32 msk, u32 value)
+static void brcm_sata_phy_wr(void __iomem *pcb_base, u32 bank,
+ u32 ofs, u32 msk, u32 value)
{
u32 tmp;
- writel(bank, addr + SATA_MDIO_BANK_OFFSET);
- tmp = readl(addr + SATA_MDIO_REG_OFFSET(ofs));
+ writel(bank, pcb_base + SATA_PCB_BANK_OFFSET);
+ tmp = readl(pcb_base + SATA_PCB_REG_OFFSET(ofs));
tmp = (tmp & msk) | value;
- writel(tmp, addr + SATA_MDIO_REG_OFFSET(ofs));
+ writel(tmp, pcb_base + SATA_PCB_REG_OFFSET(ofs));
+}
+
+static u32 brcm_sata_phy_rd(void __iomem *pcb_base, u32 bank, u32 ofs)
+{
+ writel(bank, pcb_base + SATA_PCB_BANK_OFFSET);
+ return readl(pcb_base + SATA_PCB_REG_OFFSET(ofs));
}
/* These defaults were characterized by H/W group */
-#define FMIN_VAL_DEFAULT 0x3df
-#define FMAX_VAL_DEFAULT 0x3df
-#define FMAX_VAL_SSC 0x83
+#define STB_FMIN_VAL_DEFAULT 0x3df
+#define STB_FMAX_VAL_DEFAULT 0x3df
+#define STB_FMAX_VAL_SSC 0x83
-static void brcm_sata_cfg_ssc(struct brcm_sata_port *port)
+static int brcm_stb_sata_init(struct brcm_sata_port *port)
{
- void __iomem *base = brcm_sata_phy_base(port);
+ void __iomem *base = brcm_sata_pcb_base(port);
struct brcm_sata_phy *priv = port->phy_priv;
u32 tmp;
/* override the TX spread spectrum setting */
tmp = TXPMD_CONTROL1_TX_SSC_EN_FRC_VAL | TXPMD_CONTROL1_TX_SSC_EN_FRC;
- brcm_sata_mdio_wr(base, TXPMD_REG_BANK, TXPMD_CONTROL1, ~tmp, tmp);
+ brcm_sata_phy_wr(base, TXPMD_REG_BANK, TXPMD_CONTROL1, ~tmp, tmp);
/* set fixed min freq */
- brcm_sata_mdio_wr(base, TXPMD_REG_BANK, TXPMD_TX_FREQ_CTRL_CONTROL2,
- ~TXPMD_TX_FREQ_CTRL_CONTROL2_FMIN_MASK,
- FMIN_VAL_DEFAULT);
+ brcm_sata_phy_wr(base, TXPMD_REG_BANK, TXPMD_TX_FREQ_CTRL_CONTROL2,
+ ~TXPMD_TX_FREQ_CTRL_CONTROL2_FMIN_MASK,
+ STB_FMIN_VAL_DEFAULT);
/* set fixed max freq depending on SSC config */
if (port->ssc_en) {
- dev_info(priv->dev, "enabling SSC on port %d\n", port->portnum);
- tmp = FMAX_VAL_SSC;
+ dev_info(priv->dev, "enabling SSC on port%d\n", port->portnum);
+ tmp = STB_FMAX_VAL_SSC;
} else {
- tmp = FMAX_VAL_DEFAULT;
+ tmp = STB_FMAX_VAL_DEFAULT;
}
- brcm_sata_mdio_wr(base, TXPMD_REG_BANK, TXPMD_TX_FREQ_CTRL_CONTROL3,
+ brcm_sata_phy_wr(base, TXPMD_REG_BANK, TXPMD_TX_FREQ_CTRL_CONTROL3,
~TXPMD_TX_FREQ_CTRL_CONTROL3_FMAX_MASK, tmp);
+
+ return 0;
+}
+
+/* NS2 SATA PLL1 defaults were characterized by H/W group */
+#define NS2_PLL1_ACTRL2_MAGIC 0x1df8
+#define NS2_PLL1_ACTRL3_MAGIC 0x2b00
+#define NS2_PLL1_ACTRL4_MAGIC 0x8824
+
+static int brcm_ns2_sata_init(struct brcm_sata_port *port)
+{
+ int try;
+ unsigned int val;
+ void __iomem *base = brcm_sata_pcb_base(port);
+ void __iomem *ctrl_base = brcm_sata_ctrl_base(port);
+ struct device *dev = port->phy_priv->dev;
+
+ /* Configure OOB control */
+ val = 0x0;
+ val |= (0xc << OOB_CTRL1_BURST_MAX_SHIFT);
+ val |= (0x4 << OOB_CTRL1_BURST_MIN_SHIFT);
+ val |= (0x9 << OOB_CTRL1_WAKE_IDLE_MAX_SHIFT);
+ val |= (0x3 << OOB_CTRL1_WAKE_IDLE_MIN_SHIFT);
+ brcm_sata_phy_wr(base, OOB_REG_BANK, OOB_CTRL1, 0x0, val);
+ val = 0x0;
+ val |= (0x1b << OOB_CTRL2_RESET_IDLE_MAX_SHIFT);
+ val |= (0x2 << OOB_CTRL2_BURST_CNT_SHIFT);
+ val |= (0x9 << OOB_CTRL2_RESET_IDLE_MIN_SHIFT);
+ brcm_sata_phy_wr(base, OOB_REG_BANK, OOB_CTRL2, 0x0, val);
+
+ /* Configure PHY PLL register bank 1 */
+ val = NS2_PLL1_ACTRL2_MAGIC;
+ brcm_sata_phy_wr(base, PLL1_REG_BANK, PLL1_ACTRL2, 0x0, val);
+ val = NS2_PLL1_ACTRL3_MAGIC;
+ brcm_sata_phy_wr(base, PLL1_REG_BANK, PLL1_ACTRL3, 0x0, val);
+ val = NS2_PLL1_ACTRL4_MAGIC;
+ brcm_sata_phy_wr(base, PLL1_REG_BANK, PLL1_ACTRL4, 0x0, val);
+
+ /* Configure PHY BLOCK0 register bank */
+ /* Set oob_clk_sel to refclk/2 */
+ brcm_sata_phy_wr(base, BLOCK0_REG_BANK, BLOCK0_SPARE,
+ ~BLOCK0_SPARE_OOB_CLK_SEL_MASK,
+ BLOCK0_SPARE_OOB_CLK_SEL_REFBY2);
+
+ /* Strobe PHY reset using PHY control register */
+ writel(PHY_CTRL_1_RESET, ctrl_base + PHY_CTRL_1);
+ mdelay(1);
+ writel(0x0, ctrl_base + PHY_CTRL_1);
+ mdelay(1);
+
+ /* Wait for PHY PLL lock by polling pll_lock bit */
+ try = 50;
+ while (try) {
+ val = brcm_sata_phy_rd(base, BLOCK0_REG_BANK,
+ BLOCK0_XGXSSTATUS);
+ if (val & BLOCK0_XGXSSTATUS_PLL_LOCK)
+ break;
+ msleep(20);
+ try--;
+ }
+ if (!try) {
+ /* PLL did not lock; give up */
+ dev_err(dev, "port%d PLL did not lock\n", port->portnum);
+ return -ETIMEDOUT;
+ }
+
+ dev_dbg(dev, "port%d initialized\n", port->portnum);
+
+ return 0;
}
static int brcm_sata_phy_init(struct phy *phy)
{
+ int rc;
struct brcm_sata_port *port = phy_get_drvdata(phy);
- brcm_sata_cfg_ssc(port);
+ switch (port->phy_priv->version) {
+ case BRCM_SATA_PHY_STB_28NM:
+ case BRCM_SATA_PHY_STB_40NM:
+ rc = brcm_stb_sata_init(port);
+ break;
+ case BRCM_SATA_PHY_IPROC_NS2:
+ rc = brcm_ns2_sata_init(port);
+ break;
+ default:
+ rc = -ENODEV;
+ };
return 0;
}
@@ -146,9 +298,11 @@ static const struct phy_ops phy_ops = {
static const struct of_device_id brcm_sata_phy_of_match[] = {
{ .compatible = "brcm,bcm7445-sata-phy",
- .data = (void *)BRCM_SATA_PHY_28NM },
+ .data = (void *)BRCM_SATA_PHY_STB_28NM },
{ .compatible = "brcm,bcm7425-sata-phy",
- .data = (void *)BRCM_SATA_PHY_40NM },
+ .data = (void *)BRCM_SATA_PHY_STB_40NM },
+ { .compatible = "brcm,iproc-ns2-sata-phy",
+ .data = (void *)BRCM_SATA_PHY_IPROC_NS2 },
{},
};
MODULE_DEVICE_TABLE(of, brcm_sata_phy_of_match);
@@ -181,7 +335,15 @@ static int brcm_sata_phy_probe(struct platform_device *pdev)
if (of_id)
priv->version = (enum brcm_sata_phy_version)of_id->data;
else
- priv->version = BRCM_SATA_PHY_28NM;
+ priv->version = BRCM_SATA_PHY_STB_28NM;
+
+ if (priv->version == BRCM_SATA_PHY_IPROC_NS2) {
+ res = platform_get_resource_byname(pdev, IORESOURCE_MEM,
+ "phy-ctrl");
+ priv->ctrl_base = devm_ioremap_resource(dev, res);
+ if (IS_ERR(priv->ctrl_base))
+ return PTR_ERR(priv->ctrl_base);
+ }
for_each_available_child_of_node(dn, child) {
unsigned int id;
--
1.7.9.5
^ permalink raw reply related [flat|nested] 18+ messages in thread
* [PATCH 06/16] dt-bindings: phy: bindings document for common Broadcom SATA3 PHY driver
2016-05-02 4:22 [GIT PULL] phy: for 4.7 Kishon Vijay Abraham I
` (4 preceding siblings ...)
2016-05-02 4:22 ` [PATCH 05/16] phy: Add support for NS2 SATA3 PHY in Broadcom SATA3 PHY driver Kishon Vijay Abraham I
@ 2016-05-02 4:22 ` Kishon Vijay Abraham I
2016-05-02 4:22 ` [PATCH 07/16] phy: rcar-gen3-usb2: remove unnecesary struct rcar_gen3_data Kishon Vijay Abraham I
` (10 subsequent siblings)
16 siblings, 0 replies; 18+ messages in thread
From: Kishon Vijay Abraham I @ 2016-05-02 4:22 UTC (permalink / raw)
To: gregkh; +Cc: kishon, linux-kernel
From: Anup Patel <anup.patel@broadcom.com>
This patch:
1. Renames DT bindings document of Broadcom STB SATA3 PHY driver to
common Broadcom SATA3 PHY driver bindings document
2. Adds bindings info for NS2 SATA3 PHY
Signed-off-by: Anup Patel <anup.patel@broadcom.com>
Acked-by: Rob Herring <robh@kernel.org>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
---
...brcm,brcmstb-sata-phy.txt => brcm-sata-phy.txt} | 15 +++++++++------
1 file changed, 9 insertions(+), 6 deletions(-)
rename Documentation/devicetree/bindings/phy/{brcm,brcmstb-sata-phy.txt => brcm-sata-phy.txt} (69%)
diff --git a/Documentation/devicetree/bindings/phy/brcm,brcmstb-sata-phy.txt b/Documentation/devicetree/bindings/phy/brcm-sata-phy.txt
similarity index 69%
rename from Documentation/devicetree/bindings/phy/brcm,brcmstb-sata-phy.txt
rename to Documentation/devicetree/bindings/phy/brcm-sata-phy.txt
index d87ab7c..d023120 100644
--- a/Documentation/devicetree/bindings/phy/brcm,brcmstb-sata-phy.txt
+++ b/Documentation/devicetree/bindings/phy/brcm-sata-phy.txt
@@ -1,14 +1,17 @@
-* Broadcom SATA3 PHY for STB
+* Broadcom SATA3 PHY
Required properties:
- compatible: should be one or more of
"brcm,bcm7425-sata-phy"
"brcm,bcm7445-sata-phy"
+ "brcm,iproc-ns2-sata-phy"
"brcm,phy-sata3"
- address-cells: should be 1
- size-cells: should be 0
-- reg: register range for the PHY PCB interface
-- reg-names: should be "phy"
+- reg: register ranges for the PHY PCB interface
+- reg-names: should be "phy" and "phy-ctrl"
+ The "phy-ctrl" registers are only required for
+ "brcm,iproc-ns2-sata-phy".
Sub-nodes:
Each port's PHY should be represented as a sub-node.
@@ -16,12 +19,12 @@ Sub-nodes:
Sub-nodes required properties:
- reg: the PHY number
- phy-cells: generic PHY binding; must be 0
-Optional:
-- brcm,enable-ssc: use spread spectrum clocking (SSC) on this port
+Sub-nodes optional properties:
+- brcm,enable-ssc: use spread spectrum clocking (SSC) on this port
+ This property is not applicable for "brcm,iproc-ns2-sata-phy".
Example:
-
sata-phy@f0458100 {
compatible = "brcm,bcm7445-sata-phy", "brcm,phy-sata3";
reg = <0xf0458100 0x1e00>, <0xf045804c 0x10>;
--
1.7.9.5
^ permalink raw reply related [flat|nested] 18+ messages in thread
* [PATCH 07/16] phy: rcar-gen3-usb2: remove unnecesary struct rcar_gen3_data
2016-05-02 4:22 [GIT PULL] phy: for 4.7 Kishon Vijay Abraham I
` (5 preceding siblings ...)
2016-05-02 4:22 ` [PATCH 06/16] dt-bindings: phy: bindings document for common " Kishon Vijay Abraham I
@ 2016-05-02 4:22 ` Kishon Vijay Abraham I
2016-05-02 4:22 ` [PATCH 08/16] phy: rcar-gen3-usb2: Add vbus-supply to handle VBUS on/off Kishon Vijay Abraham I
` (9 subsequent siblings)
16 siblings, 0 replies; 18+ messages in thread
From: Kishon Vijay Abraham I @ 2016-05-02 4:22 UTC (permalink / raw)
To: gregkh; +Cc: kishon, linux-kernel
From: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Since this driver uses the struct rcar_gen3_data in struct rcar_gen3_chan
only, we can remove the rcar_gen3_data.
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
---
drivers/phy/phy-rcar-gen3-usb2.c | 33 ++++++++++++++-------------------
1 file changed, 14 insertions(+), 19 deletions(-)
diff --git a/drivers/phy/phy-rcar-gen3-usb2.c b/drivers/phy/phy-rcar-gen3-usb2.c
index 257be74..3c647cd 100644
--- a/drivers/phy/phy-rcar-gen3-usb2.c
+++ b/drivers/phy/phy-rcar-gen3-usb2.c
@@ -74,20 +74,15 @@
#define USB2_ADPCTRL_IDPULLUP BIT(5) /* 1 = ID sampling is enabled */
#define USB2_ADPCTRL_DRVVBUS BIT(4)
-struct rcar_gen3_data {
- void __iomem *base;
- struct clk *clk;
-};
-
struct rcar_gen3_chan {
- struct rcar_gen3_data usb2;
+ void __iomem *base;
struct phy *phy;
bool has_otg;
};
static void rcar_gen3_set_host_mode(struct rcar_gen3_chan *ch, int host)
{
- void __iomem *usb2_base = ch->usb2.base;
+ void __iomem *usb2_base = ch->base;
u32 val = readl(usb2_base + USB2_COMMCTRL);
dev_vdbg(&ch->phy->dev, "%s: %08x, %d\n", __func__, val, host);
@@ -100,7 +95,7 @@ static void rcar_gen3_set_host_mode(struct rcar_gen3_chan *ch, int host)
static void rcar_gen3_set_linectrl(struct rcar_gen3_chan *ch, int dp, int dm)
{
- void __iomem *usb2_base = ch->usb2.base;
+ void __iomem *usb2_base = ch->base;
u32 val = readl(usb2_base + USB2_LINECTRL1);
dev_vdbg(&ch->phy->dev, "%s: %08x, %d, %d\n", __func__, val, dp, dm);
@@ -114,7 +109,7 @@ static void rcar_gen3_set_linectrl(struct rcar_gen3_chan *ch, int dp, int dm)
static void rcar_gen3_enable_vbus_ctrl(struct rcar_gen3_chan *ch, int vbus)
{
- void __iomem *usb2_base = ch->usb2.base;
+ void __iomem *usb2_base = ch->base;
u32 val = readl(usb2_base + USB2_ADPCTRL);
dev_vdbg(&ch->phy->dev, "%s: %08x, %d\n", __func__, val, vbus);
@@ -141,13 +136,13 @@ static void rcar_gen3_init_for_peri(struct rcar_gen3_chan *ch)
static bool rcar_gen3_check_vbus(struct rcar_gen3_chan *ch)
{
- return !!(readl(ch->usb2.base + USB2_ADPCTRL) &
+ return !!(readl(ch->base + USB2_ADPCTRL) &
USB2_ADPCTRL_OTGSESSVLD);
}
static bool rcar_gen3_check_id(struct rcar_gen3_chan *ch)
{
- return !!(readl(ch->usb2.base + USB2_ADPCTRL) & USB2_ADPCTRL_IDDIG);
+ return !!(readl(ch->base + USB2_ADPCTRL) & USB2_ADPCTRL_IDDIG);
}
static void rcar_gen3_device_recognition(struct rcar_gen3_chan *ch)
@@ -166,7 +161,7 @@ static void rcar_gen3_device_recognition(struct rcar_gen3_chan *ch)
static void rcar_gen3_init_otg(struct rcar_gen3_chan *ch)
{
- void __iomem *usb2_base = ch->usb2.base;
+ void __iomem *usb2_base = ch->base;
u32 val;
val = readl(usb2_base + USB2_VBCTRL);
@@ -187,7 +182,7 @@ static void rcar_gen3_init_otg(struct rcar_gen3_chan *ch)
static int rcar_gen3_phy_usb2_init(struct phy *p)
{
struct rcar_gen3_chan *channel = phy_get_drvdata(p);
- void __iomem *usb2_base = channel->usb2.base;
+ void __iomem *usb2_base = channel->base;
/* Initialize USB2 part */
writel(USB2_INT_ENABLE_INIT, usb2_base + USB2_INT_ENABLE);
@@ -205,7 +200,7 @@ static int rcar_gen3_phy_usb2_exit(struct phy *p)
{
struct rcar_gen3_chan *channel = phy_get_drvdata(p);
- writel(0, channel->usb2.base + USB2_INT_ENABLE);
+ writel(0, channel->base + USB2_INT_ENABLE);
return 0;
}
@@ -213,7 +208,7 @@ static int rcar_gen3_phy_usb2_exit(struct phy *p)
static int rcar_gen3_phy_usb2_power_on(struct phy *p)
{
struct rcar_gen3_chan *channel = phy_get_drvdata(p);
- void __iomem *usb2_base = channel->usb2.base;
+ void __iomem *usb2_base = channel->base;
u32 val;
val = readl(usb2_base + USB2_USBCTR);
@@ -235,7 +230,7 @@ static struct phy_ops rcar_gen3_phy_usb2_ops = {
static irqreturn_t rcar_gen3_phy_usb2_irq(int irq, void *_ch)
{
struct rcar_gen3_chan *ch = _ch;
- void __iomem *usb2_base = ch->usb2.base;
+ void __iomem *usb2_base = ch->base;
u32 status = readl(usb2_base + USB2_OBINTSTA);
irqreturn_t ret = IRQ_NONE;
@@ -274,9 +269,9 @@ static int rcar_gen3_phy_usb2_probe(struct platform_device *pdev)
return -ENOMEM;
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- channel->usb2.base = devm_ioremap_resource(dev, res);
- if (IS_ERR(channel->usb2.base))
- return PTR_ERR(channel->usb2.base);
+ channel->base = devm_ioremap_resource(dev, res);
+ if (IS_ERR(channel->base))
+ return PTR_ERR(channel->base);
/* call request_irq for OTG */
irq = platform_get_irq(pdev, 0);
--
1.7.9.5
^ permalink raw reply related [flat|nested] 18+ messages in thread
* [PATCH 08/16] phy: rcar-gen3-usb2: Add vbus-supply to handle VBUS on/off
2016-05-02 4:22 [GIT PULL] phy: for 4.7 Kishon Vijay Abraham I
` (6 preceding siblings ...)
2016-05-02 4:22 ` [PATCH 07/16] phy: rcar-gen3-usb2: remove unnecesary struct rcar_gen3_data Kishon Vijay Abraham I
@ 2016-05-02 4:22 ` Kishon Vijay Abraham I
2016-05-02 4:23 ` [PATCH 09/16] phy: rcar-gen3-usb2: add extcon support Kishon Vijay Abraham I
` (8 subsequent siblings)
16 siblings, 0 replies; 18+ messages in thread
From: Kishon Vijay Abraham I @ 2016-05-02 4:22 UTC (permalink / raw)
To: gregkh; +Cc: kishon, linux-kernel
From: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
To handle the VBUS on/off by a regulator driver, this patch adds
regulator APIs calling in the driver and description about vbus-supply
in the rcar-gen3-phy-usb2.txt.
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
---
.../devicetree/bindings/phy/rcar-gen3-phy-usb2.txt | 2 ++
drivers/phy/phy-rcar-gen3-usb2.c | 28 ++++++++++++++++++++
2 files changed, 30 insertions(+)
diff --git a/Documentation/devicetree/bindings/phy/rcar-gen3-phy-usb2.txt b/Documentation/devicetree/bindings/phy/rcar-gen3-phy-usb2.txt
index f9511ad..2281d6c 100644
--- a/Documentation/devicetree/bindings/phy/rcar-gen3-phy-usb2.txt
+++ b/Documentation/devicetree/bindings/phy/rcar-gen3-phy-usb2.txt
@@ -21,6 +21,8 @@ To use a USB channel where USB 2.0 Host and HSUSB (USB 2.0 Peripheral) are
combined, the device tree node should set interrupt properties to use the
channel as USB OTG:
- interrupts: interrupt specifier for the PHY.
+- vbus-supply: Phandle to a regulator that provides power to the VBUS. This
+ regulator will be managed during the PHY power on/off sequence.
Example (R-Car H3):
diff --git a/drivers/phy/phy-rcar-gen3-usb2.c b/drivers/phy/phy-rcar-gen3-usb2.c
index 3c647cd..7b14244 100644
--- a/drivers/phy/phy-rcar-gen3-usb2.c
+++ b/drivers/phy/phy-rcar-gen3-usb2.c
@@ -19,6 +19,7 @@
#include <linux/of_address.h>
#include <linux/phy/phy.h>
#include <linux/platform_device.h>
+#include <linux/regulator/consumer.h>
/******* USB2.0 Host registers (original offset is +0x200) *******/
#define USB2_INT_ENABLE 0x000
@@ -77,6 +78,7 @@
struct rcar_gen3_chan {
void __iomem *base;
struct phy *phy;
+ struct regulator *vbus;
bool has_otg;
};
@@ -210,6 +212,13 @@ static int rcar_gen3_phy_usb2_power_on(struct phy *p)
struct rcar_gen3_chan *channel = phy_get_drvdata(p);
void __iomem *usb2_base = channel->base;
u32 val;
+ int ret;
+
+ if (channel->vbus) {
+ ret = regulator_enable(channel->vbus);
+ if (ret)
+ return ret;
+ }
val = readl(usb2_base + USB2_USBCTR);
val |= USB2_USBCTR_PLL_RST;
@@ -220,10 +229,22 @@ static int rcar_gen3_phy_usb2_power_on(struct phy *p)
return 0;
}
+static int rcar_gen3_phy_usb2_power_off(struct phy *p)
+{
+ struct rcar_gen3_chan *channel = phy_get_drvdata(p);
+ int ret = 0;
+
+ if (channel->vbus)
+ ret = regulator_disable(channel->vbus);
+
+ return ret;
+}
+
static struct phy_ops rcar_gen3_phy_usb2_ops = {
.init = rcar_gen3_phy_usb2_init,
.exit = rcar_gen3_phy_usb2_exit,
.power_on = rcar_gen3_phy_usb2_power_on,
+ .power_off = rcar_gen3_phy_usb2_power_off,
.owner = THIS_MODULE,
};
@@ -290,6 +311,13 @@ static int rcar_gen3_phy_usb2_probe(struct platform_device *pdev)
return PTR_ERR(channel->phy);
}
+ channel->vbus = devm_regulator_get_optional(dev, "vbus");
+ if (IS_ERR(channel->vbus)) {
+ if (PTR_ERR(channel->vbus) == -EPROBE_DEFER)
+ return PTR_ERR(channel->vbus);
+ channel->vbus = NULL;
+ }
+
phy_set_drvdata(channel->phy, channel);
provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
--
1.7.9.5
^ permalink raw reply related [flat|nested] 18+ messages in thread
* [PATCH 09/16] phy: rcar-gen3-usb2: add extcon support
2016-05-02 4:22 [GIT PULL] phy: for 4.7 Kishon Vijay Abraham I
` (7 preceding siblings ...)
2016-05-02 4:22 ` [PATCH 08/16] phy: rcar-gen3-usb2: Add vbus-supply to handle VBUS on/off Kishon Vijay Abraham I
@ 2016-05-02 4:23 ` Kishon Vijay Abraham I
2016-05-02 4:23 ` [PATCH 10/16] dt-bindings: phy-mt65xx-usb: add support for mt2701 platform Kishon Vijay Abraham I
` (7 subsequent siblings)
16 siblings, 0 replies; 18+ messages in thread
From: Kishon Vijay Abraham I @ 2016-05-02 4:23 UTC (permalink / raw)
To: gregkh; +Cc: kishon, linux-kernel
From: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
This patch adds extcon support for otg related channel.
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
---
drivers/phy/Kconfig | 1 +
drivers/phy/phy-rcar-gen3-usb2.c | 26 ++++++++++++++++++++++++++
2 files changed, 27 insertions(+)
diff --git a/drivers/phy/Kconfig b/drivers/phy/Kconfig
index a72d73c..447cb7c 100644
--- a/drivers/phy/Kconfig
+++ b/drivers/phy/Kconfig
@@ -121,6 +121,7 @@ config PHY_RCAR_GEN2
config PHY_RCAR_GEN3_USB2
tristate "Renesas R-Car generation 3 USB 2.0 PHY driver"
depends on ARCH_RENESAS
+ depends on EXTCON
select GENERIC_PHY
help
Support for USB 2.0 PHY found on Renesas R-Car generation 3 SoCs.
diff --git a/drivers/phy/phy-rcar-gen3-usb2.c b/drivers/phy/phy-rcar-gen3-usb2.c
index 7b14244..76bb88f 100644
--- a/drivers/phy/phy-rcar-gen3-usb2.c
+++ b/drivers/phy/phy-rcar-gen3-usb2.c
@@ -12,6 +12,7 @@
* published by the Free Software Foundation.
*/
+#include <linux/extcon.h>
#include <linux/interrupt.h>
#include <linux/io.h>
#include <linux/module.h>
@@ -77,6 +78,7 @@
struct rcar_gen3_chan {
void __iomem *base;
+ struct extcon_dev *extcon;
struct phy *phy;
struct regulator *vbus;
bool has_otg;
@@ -127,6 +129,9 @@ static void rcar_gen3_init_for_host(struct rcar_gen3_chan *ch)
rcar_gen3_set_linectrl(ch, 1, 1);
rcar_gen3_set_host_mode(ch, 1);
rcar_gen3_enable_vbus_ctrl(ch, 1);
+
+ extcon_set_cable_state_(ch->extcon, EXTCON_USB_HOST, true);
+ extcon_set_cable_state_(ch->extcon, EXTCON_USB, false);
}
static void rcar_gen3_init_for_peri(struct rcar_gen3_chan *ch)
@@ -134,6 +139,9 @@ static void rcar_gen3_init_for_peri(struct rcar_gen3_chan *ch)
rcar_gen3_set_linectrl(ch, 0, 1);
rcar_gen3_set_host_mode(ch, 0);
rcar_gen3_enable_vbus_ctrl(ch, 0);
+
+ extcon_set_cable_state_(ch->extcon, EXTCON_USB_HOST, false);
+ extcon_set_cable_state_(ch->extcon, EXTCON_USB, true);
}
static bool rcar_gen3_check_vbus(struct rcar_gen3_chan *ch)
@@ -272,6 +280,12 @@ static const struct of_device_id rcar_gen3_phy_usb2_match_table[] = {
};
MODULE_DEVICE_TABLE(of, rcar_gen3_phy_usb2_match_table);
+static const unsigned int rcar_gen3_phy_cable[] = {
+ EXTCON_USB,
+ EXTCON_USB_HOST,
+ EXTCON_NONE,
+};
+
static int rcar_gen3_phy_usb2_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
@@ -297,11 +311,23 @@ static int rcar_gen3_phy_usb2_probe(struct platform_device *pdev)
/* call request_irq for OTG */
irq = platform_get_irq(pdev, 0);
if (irq >= 0) {
+ int ret;
+
irq = devm_request_irq(dev, irq, rcar_gen3_phy_usb2_irq,
IRQF_SHARED, dev_name(dev), channel);
if (irq < 0)
dev_err(dev, "No irq handler (%d)\n", irq);
channel->has_otg = true;
+ channel->extcon = devm_extcon_dev_allocate(dev,
+ rcar_gen3_phy_cable);
+ if (IS_ERR(channel->extcon))
+ return PTR_ERR(channel->extcon);
+
+ ret = devm_extcon_dev_register(dev, channel->extcon);
+ if (ret < 0) {
+ dev_err(dev, "Failed to register extcon\n");
+ return ret;
+ }
}
/* devm_phy_create() will call pm_runtime_enable(dev); */
--
1.7.9.5
^ permalink raw reply related [flat|nested] 18+ messages in thread
* [PATCH 10/16] dt-bindings: phy-mt65xx-usb: add support for mt2701 platform
2016-05-02 4:22 [GIT PULL] phy: for 4.7 Kishon Vijay Abraham I
` (8 preceding siblings ...)
2016-05-02 4:23 ` [PATCH 09/16] phy: rcar-gen3-usb2: add extcon support Kishon Vijay Abraham I
@ 2016-05-02 4:23 ` Kishon Vijay Abraham I
2016-05-02 4:23 ` [PATCH 11/16] phy: phy-mt65xx-usb3: " Kishon Vijay Abraham I
` (6 subsequent siblings)
16 siblings, 0 replies; 18+ messages in thread
From: Kishon Vijay Abraham I @ 2016-05-02 4:23 UTC (permalink / raw)
To: gregkh; +Cc: kishon, linux-kernel
From: Chunfeng Yun <chunfeng.yun@mediatek.com>
Add a new compatible string for "mt2701"
Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
---
.../devicetree/bindings/phy/phy-mt65xx-usb.txt | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/Documentation/devicetree/bindings/phy/phy-mt65xx-usb.txt b/Documentation/devicetree/bindings/phy/phy-mt65xx-usb.txt
index 00100cf..33a2b1e 100644
--- a/Documentation/devicetree/bindings/phy/phy-mt65xx-usb.txt
+++ b/Documentation/devicetree/bindings/phy/phy-mt65xx-usb.txt
@@ -4,7 +4,9 @@ mt65xx USB3.0 PHY binding
This binding describes a usb3.0 phy for mt65xx platforms of Medaitek SoC.
Required properties (controller (parent) node):
- - compatible : should be "mediatek,mt8173-u3phy"
+ - compatible : should be one of
+ "mediatek,mt2701-u3phy"
+ "mediatek,mt8173-u3phy"
- reg : offset and length of register for phy, exclude port's
register.
- clocks : a list of phandle + clock-specifier pairs, one for each
--
1.7.9.5
^ permalink raw reply related [flat|nested] 18+ messages in thread
* [PATCH 11/16] phy: phy-mt65xx-usb3: add support for mt2701 platform
2016-05-02 4:22 [GIT PULL] phy: for 4.7 Kishon Vijay Abraham I
` (9 preceding siblings ...)
2016-05-02 4:23 ` [PATCH 10/16] dt-bindings: phy-mt65xx-usb: add support for mt2701 platform Kishon Vijay Abraham I
@ 2016-05-02 4:23 ` Kishon Vijay Abraham I
2016-05-02 4:23 ` [PATCH 12/16] phy: rockhip-usb: Remove CLK_IS_ROOT Kishon Vijay Abraham I
` (5 subsequent siblings)
16 siblings, 0 replies; 18+ messages in thread
From: Kishon Vijay Abraham I @ 2016-05-02 4:23 UTC (permalink / raw)
To: gregkh; +Cc: kishon, linux-kernel
From: Chunfeng Yun <chunfeng.yun@mediatek.com>
Add a new OF device ID for mt2701
Some register settings to avoid RX sensitivity level degradation
which may arise on mt8173 platform are separated from other
platforms.
Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
---
drivers/phy/Kconfig | 5 ++-
drivers/phy/phy-mt65xx-usb3.c | 77 ++++++++++++++++++++++++++++-------------
2 files changed, 54 insertions(+), 28 deletions(-)
diff --git a/drivers/phy/Kconfig b/drivers/phy/Kconfig
index 447cb7c..f6ff76e 100644
--- a/drivers/phy/Kconfig
+++ b/drivers/phy/Kconfig
@@ -219,9 +219,8 @@ config PHY_MT65XX_USB3
depends on ARCH_MEDIATEK && OF
select GENERIC_PHY
help
- Say 'Y' here to add support for Mediatek USB3.0 PHY driver
- for mt65xx SoCs. it supports two usb2.0 ports and
- one usb3.0 port.
+ Say 'Y' here to add support for Mediatek USB3.0 PHY driver,
+ it supports multiple usb2.0 and usb3.0 ports.
config PHY_HI6220_USB
tristate "hi6220 USB PHY support"
diff --git a/drivers/phy/phy-mt65xx-usb3.c b/drivers/phy/phy-mt65xx-usb3.c
index c0e7b4b..4d85e73 100644
--- a/drivers/phy/phy-mt65xx-usb3.c
+++ b/drivers/phy/phy-mt65xx-usb3.c
@@ -134,6 +134,11 @@
#define U3P_SR_COEF_DIVISOR 1000
#define U3P_FM_DET_CYCLE_CNT 1024
+struct mt65xx_phy_pdata {
+ /* avoid RX sensitivity level degradation only for mt8173 */
+ bool avoid_rx_sen_degradation;
+};
+
struct mt65xx_phy_instance {
struct phy *phy;
void __iomem *port_base;
@@ -145,6 +150,7 @@ struct mt65xx_u3phy {
struct device *dev;
void __iomem *sif_base; /* include sif2, but exclude port's */
struct clk *u3phya_ref; /* reference clock of usb3 anolog phy */
+ const struct mt65xx_phy_pdata *pdata;
struct mt65xx_phy_instance **phys;
int nphys;
};
@@ -241,22 +247,26 @@ static void phy_instance_init(struct mt65xx_u3phy *u3phy,
tmp = readl(port_base + U3P_U2PHYACR4);
tmp &= ~P2C_U2_GPIO_CTR_MSK;
writel(tmp, port_base + U3P_U2PHYACR4);
+ }
- tmp = readl(port_base + U3P_USBPHYACR2);
- tmp |= PA2_RG_SIF_U2PLL_FORCE_EN;
- writel(tmp, port_base + U3P_USBPHYACR2);
-
- tmp = readl(port_base + U3D_U2PHYDCR0);
- tmp &= ~P2C_RG_SIF_U2PLL_FORCE_ON;
- writel(tmp, port_base + U3D_U2PHYDCR0);
- } else {
- tmp = readl(port_base + U3D_U2PHYDCR0);
- tmp |= P2C_RG_SIF_U2PLL_FORCE_ON;
- writel(tmp, port_base + U3D_U2PHYDCR0);
-
- tmp = readl(port_base + U3P_U2PHYDTM0);
- tmp |= P2C_RG_SUSPENDM | P2C_FORCE_SUSPENDM;
- writel(tmp, port_base + U3P_U2PHYDTM0);
+ if (u3phy->pdata->avoid_rx_sen_degradation) {
+ if (!index) {
+ tmp = readl(port_base + U3P_USBPHYACR2);
+ tmp |= PA2_RG_SIF_U2PLL_FORCE_EN;
+ writel(tmp, port_base + U3P_USBPHYACR2);
+
+ tmp = readl(port_base + U3D_U2PHYDCR0);
+ tmp &= ~P2C_RG_SIF_U2PLL_FORCE_ON;
+ writel(tmp, port_base + U3D_U2PHYDCR0);
+ } else {
+ tmp = readl(port_base + U3D_U2PHYDCR0);
+ tmp |= P2C_RG_SIF_U2PLL_FORCE_ON;
+ writel(tmp, port_base + U3D_U2PHYDCR0);
+
+ tmp = readl(port_base + U3P_U2PHYDTM0);
+ tmp |= P2C_RG_SUSPENDM | P2C_FORCE_SUSPENDM;
+ writel(tmp, port_base + U3P_U2PHYDTM0);
+ }
}
tmp = readl(port_base + U3P_USBPHYACR6);
@@ -318,7 +328,7 @@ static void phy_instance_power_on(struct mt65xx_u3phy *u3phy,
tmp |= XC3_RG_U3_XTAL_RX_PWD | XC3_RG_U3_FRC_XTAL_RX_PWD;
writel(tmp, u3phy->sif_base + U3P_XTALCTL3);
- /* [mt8173]switch 100uA current to SSUSB */
+ /* switch 100uA current to SSUSB */
tmp = readl(port_base + U3P_USBPHYACR5);
tmp |= PA5_RG_U2_HS_100U_U3_EN;
writel(tmp, port_base + U3P_USBPHYACR5);
@@ -335,7 +345,7 @@ static void phy_instance_power_on(struct mt65xx_u3phy *u3phy,
tmp |= PA5_RG_U2_HSTX_SRCTRL_VAL(4);
writel(tmp, port_base + U3P_USBPHYACR5);
- if (index) {
+ if (u3phy->pdata->avoid_rx_sen_degradation && index) {
tmp = readl(port_base + U3D_U2PHYDCR0);
tmp |= P2C_RG_SIF_U2PLL_FORCE_ON;
writel(tmp, port_base + U3D_U2PHYDCR0);
@@ -386,7 +396,9 @@ static void phy_instance_power_off(struct mt65xx_u3phy *u3phy,
tmp = readl(port_base + U3P_U3_PHYA_REG0);
tmp &= ~P3A_RG_U3_VUSB10_ON;
writel(tmp, port_base + U3P_U3_PHYA_REG0);
- } else {
+ }
+
+ if (u3phy->pdata->avoid_rx_sen_degradation && index) {
tmp = readl(port_base + U3D_U2PHYDCR0);
tmp &= ~P2C_RG_SIF_U2PLL_FORCE_ON;
writel(tmp, port_base + U3D_U2PHYDCR0);
@@ -402,7 +414,7 @@ static void phy_instance_exit(struct mt65xx_u3phy *u3phy,
u32 index = instance->index;
u32 tmp;
- if (index) {
+ if (u3phy->pdata->avoid_rx_sen_degradation && index) {
tmp = readl(port_base + U3D_U2PHYDCR0);
tmp &= ~P2C_RG_SIF_U2PLL_FORCE_ON;
writel(tmp, port_base + U3D_U2PHYDCR0);
@@ -502,8 +514,24 @@ static struct phy_ops mt65xx_u3phy_ops = {
.owner = THIS_MODULE,
};
+static const struct mt65xx_phy_pdata mt2701_pdata = {
+ .avoid_rx_sen_degradation = false,
+};
+
+static const struct mt65xx_phy_pdata mt8173_pdata = {
+ .avoid_rx_sen_degradation = true,
+};
+
+static const struct of_device_id mt65xx_u3phy_id_table[] = {
+ { .compatible = "mediatek,mt2701-u3phy", .data = &mt2701_pdata },
+ { .compatible = "mediatek,mt8173-u3phy", .data = &mt8173_pdata },
+ { },
+};
+MODULE_DEVICE_TABLE(of, mt65xx_u3phy_id_table);
+
static int mt65xx_u3phy_probe(struct platform_device *pdev)
{
+ const struct of_device_id *match;
struct device *dev = &pdev->dev;
struct device_node *np = dev->of_node;
struct device_node *child_np;
@@ -513,10 +541,15 @@ static int mt65xx_u3phy_probe(struct platform_device *pdev)
struct resource res;
int port, retval;
+ match = of_match_node(mt65xx_u3phy_id_table, pdev->dev.of_node);
+ if (!match)
+ return -EINVAL;
+
u3phy = devm_kzalloc(dev, sizeof(*u3phy), GFP_KERNEL);
if (!u3phy)
return -ENOMEM;
+ u3phy->pdata = match->data;
u3phy->nphys = of_get_child_count(np);
u3phy->phys = devm_kcalloc(dev, u3phy->nphys,
sizeof(*u3phy->phys), GFP_KERNEL);
@@ -587,12 +620,6 @@ put_child:
return retval;
}
-static const struct of_device_id mt65xx_u3phy_id_table[] = {
- { .compatible = "mediatek,mt8173-u3phy", },
- { },
-};
-MODULE_DEVICE_TABLE(of, mt65xx_u3phy_id_table);
-
static struct platform_driver mt65xx_u3phy_driver = {
.probe = mt65xx_u3phy_probe,
.driver = {
--
1.7.9.5
^ permalink raw reply related [flat|nested] 18+ messages in thread
* [PATCH 12/16] phy: rockhip-usb: Remove CLK_IS_ROOT
2016-05-02 4:22 [GIT PULL] phy: for 4.7 Kishon Vijay Abraham I
` (10 preceding siblings ...)
2016-05-02 4:23 ` [PATCH 11/16] phy: phy-mt65xx-usb3: " Kishon Vijay Abraham I
@ 2016-05-02 4:23 ` Kishon Vijay Abraham I
2016-05-02 4:23 ` [PATCH 13/16] phy: bcm-ns-usb2: new driver for USB 2.0 PHY on Northstar Kishon Vijay Abraham I
` (4 subsequent siblings)
16 siblings, 0 replies; 18+ messages in thread
From: Kishon Vijay Abraham I @ 2016-05-02 4:23 UTC (permalink / raw)
To: gregkh; +Cc: kishon, linux-kernel
From: Stephen Boyd <sboyd@codeaurora.org>
This flag is a no-op now (see commit 47b0eeb3dc8a "clk: Deprecate
CLK_IS_ROOT", 2016-02-02) so remove it.
Cc: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
---
drivers/phy/phy-rockchip-usb.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/phy/phy-rockchip-usb.c b/drivers/phy/phy-rockchip-usb.c
index f62d899..d60b149 100644
--- a/drivers/phy/phy-rockchip-usb.c
+++ b/drivers/phy/phy-rockchip-usb.c
@@ -216,7 +216,7 @@ static int rockchip_usb_phy_init(struct rockchip_usb_phy_base *base,
init.parent_names = &clk_name;
init.num_parents = 1;
} else {
- init.flags = CLK_IS_ROOT;
+ init.flags = 0;
init.parent_names = NULL;
init.num_parents = 0;
}
--
1.7.9.5
^ permalink raw reply related [flat|nested] 18+ messages in thread
* [PATCH 13/16] phy: bcm-ns-usb2: new driver for USB 2.0 PHY on Northstar
2016-05-02 4:22 [GIT PULL] phy: for 4.7 Kishon Vijay Abraham I
` (11 preceding siblings ...)
2016-05-02 4:23 ` [PATCH 12/16] phy: rockhip-usb: Remove CLK_IS_ROOT Kishon Vijay Abraham I
@ 2016-05-02 4:23 ` Kishon Vijay Abraham I
2016-05-02 4:23 ` [PATCH 14/16] phy: exynos-mipi-video: Drop support for direct access to PMU Kishon Vijay Abraham I
` (3 subsequent siblings)
16 siblings, 0 replies; 18+ messages in thread
From: Kishon Vijay Abraham I @ 2016-05-02 4:23 UTC (permalink / raw)
To: gregkh; +Cc: kishon, linux-kernel
From: Rafał Miłecki <zajec5@gmail.com>
Northstar is a family of SoCs used in home routers. They have USB 2.0
and 3.0 controllers with PHYs that need to be properly initialized.
This driver provides PHY init support in a generic way and can be bound
with an EHCI controller driver.
There are (just a few) registers being defined in bcma header. It's
because DMU/CRU registers will be also needed in other drivers. We will
need them e.g. in PCIe controller/PHY driver and at some point probably
in clock driver for BCM53573 chipset. By using include/linux/bcma/ we
avoid code duplication.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
---
.../devicetree/bindings/phy/bcm-ns-usb2-phy.txt | 21 +++
drivers/phy/Kconfig | 9 ++
drivers/phy/Makefile | 1 +
drivers/phy/phy-bcm-ns-usb2.c | 137 ++++++++++++++++++++
include/linux/bcma/bcma.h | 1 +
include/linux/bcma/bcma_driver_arm_c9.h | 15 +++
6 files changed, 184 insertions(+)
create mode 100644 Documentation/devicetree/bindings/phy/bcm-ns-usb2-phy.txt
create mode 100644 drivers/phy/phy-bcm-ns-usb2.c
create mode 100644 include/linux/bcma/bcma_driver_arm_c9.h
diff --git a/Documentation/devicetree/bindings/phy/bcm-ns-usb2-phy.txt b/Documentation/devicetree/bindings/phy/bcm-ns-usb2-phy.txt
new file mode 100644
index 0000000..a7aee9e
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/bcm-ns-usb2-phy.txt
@@ -0,0 +1,21 @@
+Driver for Broadcom Northstar USB 2.0 PHY
+
+Required properties:
+- compatible: brcm,ns-usb2-phy
+- reg: iomem address range of DMU (Device Management Unit)
+- reg-names: "dmu", the only needed & supported reg right now
+- clocks: USB PHY reference clock
+- clock-names: "phy-ref-clk", the only needed & supported clock right now
+
+To initialize USB 2.0 PHY driver needs to setup PLL correctly. To do this it
+requires passing phandle to the USB PHY reference clock.
+
+Example:
+ usb2-phy {
+ compatible = "brcm,ns-usb2-phy";
+ reg = <0x1800c000 0x1000>;
+ reg-names = "dmu";
+ #phy-cells = <0>;
+ clocks = <&genpll BCM_NSP_GENPLL_USB_PHY_REF_CLK>;
+ clock-names = "phy-ref-clk";
+ };
diff --git a/drivers/phy/Kconfig b/drivers/phy/Kconfig
index f6ff76e..f2b458f 100644
--- a/drivers/phy/Kconfig
+++ b/drivers/phy/Kconfig
@@ -15,6 +15,15 @@ config GENERIC_PHY
phy users can obtain reference to the PHY. All the users of this
framework should select this config.
+config PHY_BCM_NS_USB2
+ tristate "Broadcom Northstar USB 2.0 PHY Driver"
+ depends on ARCH_BCM_IPROC || COMPILE_TEST
+ depends on HAS_IOMEM && OF
+ select GENERIC_PHY
+ help
+ Enable this to support Broadcom USB 2.0 PHY connected to the USB
+ controller on Northstar family.
+
config PHY_BERLIN_USB
tristate "Marvell Berlin USB PHY Driver"
depends on ARCH_BERLIN && RESET_CONTROLLER && HAS_IOMEM && OF
diff --git a/drivers/phy/Makefile b/drivers/phy/Makefile
index f03fa1f..0de09e1 100644
--- a/drivers/phy/Makefile
+++ b/drivers/phy/Makefile
@@ -3,6 +3,7 @@
#
obj-$(CONFIG_GENERIC_PHY) += phy-core.o
+obj-$(CONFIG_PHY_BCM_NS_USB2) += phy-bcm-ns-usb2.o
obj-$(CONFIG_PHY_BERLIN_USB) += phy-berlin-usb.o
obj-$(CONFIG_PHY_BERLIN_SATA) += phy-berlin-sata.o
obj-$(CONFIG_PHY_DM816X_USB) += phy-dm816x-usb.o
diff --git a/drivers/phy/phy-bcm-ns-usb2.c b/drivers/phy/phy-bcm-ns-usb2.c
new file mode 100644
index 0000000..95ab6b2
--- /dev/null
+++ b/drivers/phy/phy-bcm-ns-usb2.c
@@ -0,0 +1,137 @@
+/*
+ * Broadcom Northstar USB 2.0 PHY Driver
+ *
+ * Copyright (C) 2016 Rafał Miłecki <zajec5@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/bcma/bcma.h>
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/module.h>
+#include <linux/of_address.h>
+#include <linux/of_platform.h>
+#include <linux/phy/phy.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+
+struct bcm_ns_usb2 {
+ struct device *dev;
+ struct clk *ref_clk;
+ struct phy *phy;
+ void __iomem *dmu;
+};
+
+static int bcm_ns_usb2_phy_init(struct phy *phy)
+{
+ struct bcm_ns_usb2 *usb2 = phy_get_drvdata(phy);
+ struct device *dev = usb2->dev;
+ void __iomem *dmu = usb2->dmu;
+ u32 ref_clk_rate, usb2ctl, usb_pll_ndiv, usb_pll_pdiv;
+ int err = 0;
+
+ err = clk_prepare_enable(usb2->ref_clk);
+ if (err < 0) {
+ dev_err(dev, "Failed to prepare ref clock: %d\n", err);
+ goto err_out;
+ }
+
+ ref_clk_rate = clk_get_rate(usb2->ref_clk);
+ if (!ref_clk_rate) {
+ dev_err(dev, "Failed to get ref clock rate\n");
+ err = -EINVAL;
+ goto err_clk_off;
+ }
+
+ usb2ctl = readl(dmu + BCMA_DMU_CRU_USB2_CONTROL);
+
+ if (usb2ctl & BCMA_DMU_CRU_USB2_CONTROL_USB_PLL_PDIV_MASK) {
+ usb_pll_pdiv = usb2ctl;
+ usb_pll_pdiv &= BCMA_DMU_CRU_USB2_CONTROL_USB_PLL_PDIV_MASK;
+ usb_pll_pdiv >>= BCMA_DMU_CRU_USB2_CONTROL_USB_PLL_PDIV_SHIFT;
+ } else {
+ usb_pll_pdiv = 1 << 3;
+ }
+
+ /* Calculate ndiv based on a solid 1920 MHz that is for USB2 PHY */
+ usb_pll_ndiv = (1920000000 * usb_pll_pdiv) / ref_clk_rate;
+
+ /* Unlock DMU PLL settings with some magic value */
+ writel(0x0000ea68, dmu + BCMA_DMU_CRU_CLKSET_KEY);
+
+ /* Write USB 2.0 PLL control setting */
+ usb2ctl &= ~BCMA_DMU_CRU_USB2_CONTROL_USB_PLL_NDIV_MASK;
+ usb2ctl |= usb_pll_ndiv << BCMA_DMU_CRU_USB2_CONTROL_USB_PLL_NDIV_SHIFT;
+ writel(usb2ctl, dmu + BCMA_DMU_CRU_USB2_CONTROL);
+
+ /* Lock DMU PLL settings */
+ writel(0x00000000, dmu + BCMA_DMU_CRU_CLKSET_KEY);
+
+err_clk_off:
+ clk_disable_unprepare(usb2->ref_clk);
+err_out:
+ return err;
+}
+
+static const struct phy_ops ops = {
+ .init = bcm_ns_usb2_phy_init,
+ .owner = THIS_MODULE,
+};
+
+static int bcm_ns_usb2_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct bcm_ns_usb2 *usb2;
+ struct resource *res;
+ struct phy_provider *phy_provider;
+
+ usb2 = devm_kzalloc(&pdev->dev, sizeof(*usb2), GFP_KERNEL);
+ if (!usb2)
+ return -ENOMEM;
+ usb2->dev = dev;
+
+ res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "dmu");
+ usb2->dmu = devm_ioremap_resource(dev, res);
+ if (IS_ERR(usb2->dmu)) {
+ dev_err(dev, "Failed to map DMU regs\n");
+ return PTR_ERR(usb2->dmu);
+ }
+
+ usb2->ref_clk = devm_clk_get(dev, "phy-ref-clk");
+ if (IS_ERR(usb2->ref_clk)) {
+ dev_err(dev, "Clock not defined\n");
+ return PTR_ERR(usb2->ref_clk);
+ }
+
+ usb2->phy = devm_phy_create(dev, NULL, &ops);
+ if (IS_ERR(dev))
+ return PTR_ERR(dev);
+
+ phy_set_drvdata(usb2->phy, usb2);
+ platform_set_drvdata(pdev, usb2);
+
+ phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
+ return PTR_ERR_OR_ZERO(phy_provider);
+}
+
+static const struct of_device_id bcm_ns_usb2_id_table[] = {
+ { .compatible = "brcm,ns-usb2-phy", },
+ {},
+};
+MODULE_DEVICE_TABLE(of, bcm_ns_usb2_id_table);
+
+static struct platform_driver bcm_ns_usb2_driver = {
+ .probe = bcm_ns_usb2_probe,
+ .driver = {
+ .name = "bcm_ns_usb2",
+ .of_match_table = bcm_ns_usb2_id_table,
+ },
+};
+module_platform_driver(bcm_ns_usb2_driver);
+
+MODULE_LICENSE("GPL v2");
diff --git a/include/linux/bcma/bcma.h b/include/linux/bcma/bcma.h
index 0367c63..e6b41f4 100644
--- a/include/linux/bcma/bcma.h
+++ b/include/linux/bcma/bcma.h
@@ -4,6 +4,7 @@
#include <linux/pci.h>
#include <linux/mod_devicetable.h>
+#include <linux/bcma/bcma_driver_arm_c9.h>
#include <linux/bcma/bcma_driver_chipcommon.h>
#include <linux/bcma/bcma_driver_pci.h>
#include <linux/bcma/bcma_driver_pcie2.h>
diff --git a/include/linux/bcma/bcma_driver_arm_c9.h b/include/linux/bcma/bcma_driver_arm_c9.h
new file mode 100644
index 0000000..93bd73d
--- /dev/null
+++ b/include/linux/bcma/bcma_driver_arm_c9.h
@@ -0,0 +1,15 @@
+#ifndef LINUX_BCMA_DRIVER_ARM_C9_H_
+#define LINUX_BCMA_DRIVER_ARM_C9_H_
+
+/* DMU (Device Management Unit) */
+#define BCMA_DMU_CRU_USB2_CONTROL 0x0164
+#define BCMA_DMU_CRU_USB2_CONTROL_USB_PLL_NDIV_MASK 0x00000FFC
+#define BCMA_DMU_CRU_USB2_CONTROL_USB_PLL_NDIV_SHIFT 2
+#define BCMA_DMU_CRU_USB2_CONTROL_USB_PLL_PDIV_MASK 0x00007000
+#define BCMA_DMU_CRU_USB2_CONTROL_USB_PLL_PDIV_SHIFT 12
+#define BCMA_DMU_CRU_CLKSET_KEY 0x0180
+#define BCMA_DMU_CRU_STRAPS_CTRL 0x02A0
+#define BCMA_DMU_CRU_STRAPS_CTRL_USB3 0x00000010
+#define BCMA_DMU_CRU_STRAPS_CTRL_4BYTE 0x00008000
+
+#endif /* LINUX_BCMA_DRIVER_ARM_C9_H_ */
--
1.7.9.5
^ permalink raw reply related [flat|nested] 18+ messages in thread
* [PATCH 14/16] phy: exynos-mipi-video: Drop support for direct access to PMU
2016-05-02 4:22 [GIT PULL] phy: for 4.7 Kishon Vijay Abraham I
` (12 preceding siblings ...)
2016-05-02 4:23 ` [PATCH 13/16] phy: bcm-ns-usb2: new driver for USB 2.0 PHY on Northstar Kishon Vijay Abraham I
@ 2016-05-02 4:23 ` Kishon Vijay Abraham I
2016-05-02 4:23 ` [PATCH 15/16] phy: exynos-mipi-video: Rewrite handling of phy registers Kishon Vijay Abraham I
` (2 subsequent siblings)
16 siblings, 0 replies; 18+ messages in thread
From: Kishon Vijay Abraham I @ 2016-05-02 4:23 UTC (permalink / raw)
To: gregkh; +Cc: kishon, linux-kernel
From: Sylwester Nawrocki <s.nawrocki@samsung.com>
There is no need to support access to the PMU through memory ioresource
as now access through PMU regmap should only be used.
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
---
drivers/phy/phy-exynos-mipi-video.c | 57 ++++++++---------------------------
1 file changed, 13 insertions(+), 44 deletions(-)
diff --git a/drivers/phy/phy-exynos-mipi-video.c b/drivers/phy/phy-exynos-mipi-video.c
index 2a54cab..d4f5d8e 100644
--- a/drivers/phy/phy-exynos-mipi-video.c
+++ b/drivers/phy/phy-exynos-mipi-video.c
@@ -22,9 +22,6 @@
#include <linux/spinlock.h>
#include <linux/mfd/syscon.h>
-/* MIPI_PHYn_CONTROL reg. offset (for base address from ioremap): n = 0..1 */
-#define EXYNOS_MIPI_PHY_CONTROL(n) ((n) * 4)
-
enum exynos_mipi_phy_id {
EXYNOS_MIPI_PHY_ID_CSIS0,
EXYNOS_MIPI_PHY_ID_DSIM0,
@@ -50,7 +47,6 @@ static int __set_phy_state(struct exynos_mipi_video_phy *state,
enum exynos_mipi_phy_id id, unsigned int on)
{
const unsigned int offset = EXYNOS4_MIPI_PHY_CONTROL(id / 2);
- void __iomem *addr;
u32 val, reset;
if (is_mipi_dsim_phy_id(id))
@@ -60,35 +56,17 @@ static int __set_phy_state(struct exynos_mipi_video_phy *state,
spin_lock(&state->slock);
- if (!IS_ERR(state->regmap)) {
- regmap_read(state->regmap, offset, &val);
- if (on)
- val |= reset;
- else
- val &= ~reset;
- regmap_write(state->regmap, offset, val);
- if (on)
- val |= EXYNOS4_MIPI_PHY_ENABLE;
- else if (!(val & EXYNOS4_MIPI_PHY_RESET_MASK))
- val &= ~EXYNOS4_MIPI_PHY_ENABLE;
- regmap_write(state->regmap, offset, val);
- } else {
- addr = state->regs + EXYNOS_MIPI_PHY_CONTROL(id / 2);
-
- val = readl(addr);
- if (on)
- val |= reset;
- else
- val &= ~reset;
- writel(val, addr);
- /* Clear ENABLE bit only if MRESETN, SRESETN bits are not set */
- if (on)
- val |= EXYNOS4_MIPI_PHY_ENABLE;
- else if (!(val & EXYNOS4_MIPI_PHY_RESET_MASK))
- val &= ~EXYNOS4_MIPI_PHY_ENABLE;
-
- writel(val, addr);
- }
+ regmap_read(state->regmap, offset, &val);
+ if (on)
+ val |= reset;
+ else
+ val &= ~reset;
+ regmap_write(state->regmap, offset, val);
+ if (on)
+ val |= EXYNOS4_MIPI_PHY_ENABLE;
+ else if (!(val & EXYNOS4_MIPI_PHY_RESET_MASK))
+ val &= ~EXYNOS4_MIPI_PHY_ENABLE;
+ regmap_write(state->regmap, offset, val);
spin_unlock(&state->slock);
return 0;
@@ -142,17 +120,8 @@ static int exynos_mipi_video_phy_probe(struct platform_device *pdev)
return -ENOMEM;
state->regmap = syscon_regmap_lookup_by_phandle(dev->of_node, "syscon");
- if (IS_ERR(state->regmap)) {
- struct resource *res;
-
- dev_info(dev, "regmap lookup failed: %ld\n",
- PTR_ERR(state->regmap));
-
- res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- state->regs = devm_ioremap_resource(dev, res);
- if (IS_ERR(state->regs))
- return PTR_ERR(state->regs);
- }
+ if (IS_ERR(state->regmap))
+ return PTR_ERR(state->regmap);
dev_set_drvdata(dev, state);
spin_lock_init(&state->slock);
--
1.7.9.5
^ permalink raw reply related [flat|nested] 18+ messages in thread
* [PATCH 15/16] phy: exynos-mipi-video: Rewrite handling of phy registers
2016-05-02 4:22 [GIT PULL] phy: for 4.7 Kishon Vijay Abraham I
` (13 preceding siblings ...)
2016-05-02 4:23 ` [PATCH 14/16] phy: exynos-mipi-video: Drop support for direct access to PMU Kishon Vijay Abraham I
@ 2016-05-02 4:23 ` Kishon Vijay Abraham I
2016-05-02 4:23 ` [PATCH 16/16] phy: exynos-mipi-video: Add support for Exynos 5420 and 5433 SoCs Kishon Vijay Abraham I
2016-05-03 21:51 ` [GIT PULL] phy: for 4.7 Greg KH
16 siblings, 0 replies; 18+ messages in thread
From: Kishon Vijay Abraham I @ 2016-05-02 4:23 UTC (permalink / raw)
To: gregkh; +Cc: kishon, linux-kernel
From: Marek Szyprowski <m.szyprowski@samsung.com>
Controlling Exynos MIPI DPHY is done by handling 2 registers: one for
phy reset and one for enabling it. This patch moves definitions of those
2 registers to speparate exynos_mipi_phy_desc structure, which can be
defined separately for each PHY for each supported hardware variant.
This code rewrite is needed to add support for newer Exynos SoCs, which
have MIPI PHY related registers at different offsets or even different
register regions.
Acked-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
---
drivers/phy/phy-exynos-mipi-video.c | 165 +++++++++++++++++++++++++++--------
1 file changed, 130 insertions(+), 35 deletions(-)
diff --git a/drivers/phy/phy-exynos-mipi-video.c b/drivers/phy/phy-exynos-mipi-video.c
index d4f5d8e..3cb69e0 100644
--- a/drivers/phy/phy-exynos-mipi-video.c
+++ b/drivers/phy/phy-exynos-mipi-video.c
@@ -16,13 +16,14 @@
#include <linux/module.h>
#include <linux/of.h>
#include <linux/of_address.h>
+#include <linux/of_device.h>
#include <linux/phy/phy.h>
-#include <linux/platform_device.h>
#include <linux/regmap.h>
#include <linux/spinlock.h>
#include <linux/mfd/syscon.h>
enum exynos_mipi_phy_id {
+ EXYNOS_MIPI_PHY_ID_NONE = -1,
EXYNOS_MIPI_PHY_ID_CSIS0,
EXYNOS_MIPI_PHY_ID_DSIM0,
EXYNOS_MIPI_PHY_ID_CSIS1,
@@ -30,57 +31,137 @@ enum exynos_mipi_phy_id {
EXYNOS_MIPI_PHYS_NUM
};
-#define is_mipi_dsim_phy_id(id) \
- ((id) == EXYNOS_MIPI_PHY_ID_DSIM0 || (id) == EXYNOS_MIPI_PHY_ID_DSIM1)
+enum exynos_mipi_phy_regmap_id {
+ EXYNOS_MIPI_REGMAP_PMU,
+ EXYNOS_MIPI_REGMAPS_NUM
+};
+
+struct mipi_phy_device_desc {
+ int num_phys;
+ int num_regmaps;
+ const char *regmap_names[EXYNOS_MIPI_REGMAPS_NUM];
+ struct exynos_mipi_phy_desc {
+ enum exynos_mipi_phy_id coupled_phy_id;
+ u32 enable_val;
+ unsigned int enable_reg;
+ enum exynos_mipi_phy_regmap_id enable_map;
+ u32 resetn_val;
+ unsigned int resetn_reg;
+ enum exynos_mipi_phy_regmap_id resetn_map;
+ } phys[EXYNOS_MIPI_PHYS_NUM];
+};
+
+static const struct mipi_phy_device_desc s5pv210_mipi_phy = {
+ .num_regmaps = 1,
+ .regmap_names = {"syscon"},
+ .num_phys = 4,
+ .phys = {
+ {
+ /* EXYNOS_MIPI_PHY_ID_CSIS0 */
+ .coupled_phy_id = EXYNOS_MIPI_PHY_ID_DSIM0,
+ .enable_val = EXYNOS4_MIPI_PHY_ENABLE,
+ .enable_reg = EXYNOS4_MIPI_PHY_CONTROL(0),
+ .enable_map = EXYNOS_MIPI_REGMAP_PMU,
+ .resetn_val = EXYNOS4_MIPI_PHY_SRESETN,
+ .resetn_reg = EXYNOS4_MIPI_PHY_CONTROL(0),
+ .resetn_map = EXYNOS_MIPI_REGMAP_PMU,
+ }, {
+ /* EXYNOS_MIPI_PHY_ID_DSIM0 */
+ .coupled_phy_id = EXYNOS_MIPI_PHY_ID_CSIS0,
+ .enable_val = EXYNOS4_MIPI_PHY_ENABLE,
+ .enable_reg = EXYNOS4_MIPI_PHY_CONTROL(0),
+ .enable_map = EXYNOS_MIPI_REGMAP_PMU,
+ .resetn_val = EXYNOS4_MIPI_PHY_MRESETN,
+ .resetn_reg = EXYNOS4_MIPI_PHY_CONTROL(0),
+ .resetn_map = EXYNOS_MIPI_REGMAP_PMU,
+ }, {
+ /* EXYNOS_MIPI_PHY_ID_CSIS1 */
+ .coupled_phy_id = EXYNOS_MIPI_PHY_ID_DSIM1,
+ .enable_val = EXYNOS4_MIPI_PHY_ENABLE,
+ .enable_reg = EXYNOS4_MIPI_PHY_CONTROL(1),
+ .enable_map = EXYNOS_MIPI_REGMAP_PMU,
+ .resetn_val = EXYNOS4_MIPI_PHY_SRESETN,
+ .resetn_reg = EXYNOS4_MIPI_PHY_CONTROL(1),
+ .resetn_map = EXYNOS_MIPI_REGMAP_PMU,
+ }, {
+ /* EXYNOS_MIPI_PHY_ID_DSIM1 */
+ .coupled_phy_id = EXYNOS_MIPI_PHY_ID_CSIS1,
+ .enable_val = EXYNOS4_MIPI_PHY_ENABLE,
+ .enable_reg = EXYNOS4_MIPI_PHY_CONTROL(1),
+ .enable_map = EXYNOS_MIPI_REGMAP_PMU,
+ .resetn_val = EXYNOS4_MIPI_PHY_MRESETN,
+ .resetn_reg = EXYNOS4_MIPI_PHY_CONTROL(1),
+ .resetn_map = EXYNOS_MIPI_REGMAP_PMU,
+ },
+ },
+};
+
struct exynos_mipi_video_phy {
+ struct regmap *regmaps[EXYNOS_MIPI_REGMAPS_NUM];
+ int num_phys;
struct video_phy_desc {
struct phy *phy;
unsigned int index;
+ const struct exynos_mipi_phy_desc *data;
} phys[EXYNOS_MIPI_PHYS_NUM];
spinlock_t slock;
- void __iomem *regs;
- struct regmap *regmap;
};
-static int __set_phy_state(struct exynos_mipi_video_phy *state,
- enum exynos_mipi_phy_id id, unsigned int on)
+static inline int __is_running(const struct exynos_mipi_phy_desc *data,
+ struct exynos_mipi_video_phy *state)
{
- const unsigned int offset = EXYNOS4_MIPI_PHY_CONTROL(id / 2);
- u32 val, reset;
+ u32 val;
- if (is_mipi_dsim_phy_id(id))
- reset = EXYNOS4_MIPI_PHY_MRESETN;
- else
- reset = EXYNOS4_MIPI_PHY_SRESETN;
+ regmap_read(state->regmaps[data->resetn_map], data->resetn_reg, &val);
+ return val & data->resetn_val;
+}
+
+static int __set_phy_state(const struct exynos_mipi_phy_desc *data,
+ struct exynos_mipi_video_phy *state, unsigned int on)
+{
+ u32 val;
spin_lock(&state->slock);
- regmap_read(state->regmap, offset, &val);
- if (on)
- val |= reset;
- else
- val &= ~reset;
- regmap_write(state->regmap, offset, val);
- if (on)
- val |= EXYNOS4_MIPI_PHY_ENABLE;
- else if (!(val & EXYNOS4_MIPI_PHY_RESET_MASK))
- val &= ~EXYNOS4_MIPI_PHY_ENABLE;
- regmap_write(state->regmap, offset, val);
+ /* disable in PMU sysreg */
+ if (!on && data->coupled_phy_id >= 0 &&
+ !__is_running(state->phys[data->coupled_phy_id].data, state)) {
+ regmap_read(state->regmaps[data->enable_map], data->enable_reg,
+ &val);
+ val &= ~data->enable_val;
+ regmap_write(state->regmaps[data->enable_map], data->enable_reg,
+ val);
+ }
+
+ /* PHY reset */
+ regmap_read(state->regmaps[data->resetn_map], data->resetn_reg, &val);
+ val = on ? (val | data->resetn_val) : (val & ~data->resetn_val);
+ regmap_write(state->regmaps[data->resetn_map], data->resetn_reg, val);
+
+ /* enable in PMU sysreg */
+ if (on) {
+ regmap_read(state->regmaps[data->enable_map], data->enable_reg,
+ &val);
+ val |= data->enable_val;
+ regmap_write(state->regmaps[data->enable_map], data->enable_reg,
+ val);
+ }
spin_unlock(&state->slock);
+
return 0;
}
#define to_mipi_video_phy(desc) \
- container_of((desc), struct exynos_mipi_video_phy, phys[(desc)->index]);
+ container_of((desc), struct exynos_mipi_video_phy, phys[(desc)->index])
static int exynos_mipi_video_phy_power_on(struct phy *phy)
{
struct video_phy_desc *phy_desc = phy_get_drvdata(phy);
struct exynos_mipi_video_phy *state = to_mipi_video_phy(phy_desc);
- return __set_phy_state(state, phy_desc->index, 1);
+ return __set_phy_state(phy_desc->data, state, 1);
}
static int exynos_mipi_video_phy_power_off(struct phy *phy)
@@ -88,7 +169,7 @@ static int exynos_mipi_video_phy_power_off(struct phy *phy)
struct video_phy_desc *phy_desc = phy_get_drvdata(phy);
struct exynos_mipi_video_phy *state = to_mipi_video_phy(phy_desc);
- return __set_phy_state(state, phy_desc->index, 0);
+ return __set_phy_state(phy_desc->data, state, 0);
}
static struct phy *exynos_mipi_video_phy_xlate(struct device *dev,
@@ -96,7 +177,7 @@ static struct phy *exynos_mipi_video_phy_xlate(struct device *dev,
{
struct exynos_mipi_video_phy *state = dev_get_drvdata(dev);
- if (WARN_ON(args->args[0] >= EXYNOS_MIPI_PHYS_NUM))
+ if (WARN_ON(args->args[0] >= state->num_phys))
return ERR_PTR(-ENODEV);
return state->phys[args->args[0]].phy;
@@ -110,23 +191,33 @@ static const struct phy_ops exynos_mipi_video_phy_ops = {
static int exynos_mipi_video_phy_probe(struct platform_device *pdev)
{
+ const struct mipi_phy_device_desc *phy_dev;
struct exynos_mipi_video_phy *state;
struct device *dev = &pdev->dev;
+ struct device_node *np = dev->of_node;
struct phy_provider *phy_provider;
unsigned int i;
+ phy_dev = of_device_get_match_data(dev);
+ if (!phy_dev)
+ return -ENODEV;
+
state = devm_kzalloc(dev, sizeof(*state), GFP_KERNEL);
if (!state)
return -ENOMEM;
- state->regmap = syscon_regmap_lookup_by_phandle(dev->of_node, "syscon");
- if (IS_ERR(state->regmap))
- return PTR_ERR(state->regmap);
+ for (i = 0; i < phy_dev->num_regmaps; i++) {
+ state->regmaps[i] = syscon_regmap_lookup_by_phandle(np,
+ phy_dev->regmap_names[i]);
+ if (IS_ERR(state->regmaps[i]))
+ return PTR_ERR(state->regmaps[i]);
+ }
+ state->num_phys = phy_dev->num_phys;
+ spin_lock_init(&state->slock);
dev_set_drvdata(dev, state);
- spin_lock_init(&state->slock);
- for (i = 0; i < EXYNOS_MIPI_PHYS_NUM; i++) {
+ for (i = 0; i < state->num_phys; i++) {
struct phy *phy = devm_phy_create(dev, NULL,
&exynos_mipi_video_phy_ops);
if (IS_ERR(phy)) {
@@ -136,6 +227,7 @@ static int exynos_mipi_video_phy_probe(struct platform_device *pdev)
state->phys[i].phy = phy;
state->phys[i].index = i;
+ state->phys[i].data = &phy_dev->phys[i];
phy_set_drvdata(phy, &state->phys[i]);
}
@@ -146,8 +238,11 @@ static int exynos_mipi_video_phy_probe(struct platform_device *pdev)
}
static const struct of_device_id exynos_mipi_video_phy_of_match[] = {
- { .compatible = "samsung,s5pv210-mipi-video-phy" },
- { },
+ {
+ .compatible = "samsung,s5pv210-mipi-video-phy",
+ .data = &s5pv210_mipi_phy,
+ },
+ { /* sentinel */ },
};
MODULE_DEVICE_TABLE(of, exynos_mipi_video_phy_of_match);
--
1.7.9.5
^ permalink raw reply related [flat|nested] 18+ messages in thread
* [PATCH 16/16] phy: exynos-mipi-video: Add support for Exynos 5420 and 5433 SoCs
2016-05-02 4:22 [GIT PULL] phy: for 4.7 Kishon Vijay Abraham I
` (14 preceding siblings ...)
2016-05-02 4:23 ` [PATCH 15/16] phy: exynos-mipi-video: Rewrite handling of phy registers Kishon Vijay Abraham I
@ 2016-05-02 4:23 ` Kishon Vijay Abraham I
2016-05-03 21:51 ` [GIT PULL] phy: for 4.7 Greg KH
16 siblings, 0 replies; 18+ messages in thread
From: Kishon Vijay Abraham I @ 2016-05-02 4:23 UTC (permalink / raw)
To: gregkh; +Cc: kishon, linux-kernel
From: Marek Szyprowski <m.szyprowski@samsung.com>
This patch adds support for MIPI DPHYs found in Exynos5420-compatible
(5420, 5422 and 5800) and Exynos5433 SoCs. Those SoCs differs from
earlier by different offset of MIPI DPHY registers in PMU controllers
(Exynos 5420-compatible case) or by moving MIPI DPHY reset registers to
separate system register controllers (Exynos 5433 case). In both case
also additional 5th PHY (MIPI CSIS 2) has been added.
Acked-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
---
.../devicetree/bindings/phy/samsung-phy.txt | 18 ++-
drivers/phy/phy-exynos-mipi-video.c | 129 +++++++++++++++++++-
include/linux/mfd/syscon/exynos5-pmu.h | 3 +
3 files changed, 147 insertions(+), 3 deletions(-)
diff --git a/Documentation/devicetree/bindings/phy/samsung-phy.txt b/Documentation/devicetree/bindings/phy/samsung-phy.txt
index 0289d3b..9872ba8 100644
--- a/Documentation/devicetree/bindings/phy/samsung-phy.txt
+++ b/Documentation/devicetree/bindings/phy/samsung-phy.txt
@@ -2,9 +2,20 @@ Samsung S5P/EXYNOS SoC series MIPI CSIS/DSIM DPHY
-------------------------------------------------
Required properties:
-- compatible : should be "samsung,s5pv210-mipi-video-phy";
+- compatible : should be one of the listed compatibles:
+ - "samsung,s5pv210-mipi-video-phy"
+ - "samsung,exynos5420-mipi-video-phy"
+ - "samsung,exynos5433-mipi-video-phy"
- #phy-cells : from the generic phy bindings, must be 1;
-- syscon - phandle to the PMU system controller;
+
+In case of s5pv210 and exynos5420 compatible PHYs:
+- syscon - phandle to the PMU system controller
+
+In case of exynos5433 compatible PHY:
+ - samsung,pmu-syscon - phandle to the PMU system controller
+ - samsung,disp-sysreg - phandle to the DISP system registers controller
+ - samsung,cam0-sysreg - phandle to the CAM0 system registers controller
+ - samsung,cam1-sysreg - phandle to the CAM1 system registers controller
For "samsung,s5pv210-mipi-video-phy" compatible PHYs the second cell in
the PHY specifier identifies the PHY and its meaning is as follows:
@@ -12,6 +23,9 @@ the PHY specifier identifies the PHY and its meaning is as follows:
1 - MIPI DSIM 0,
2 - MIPI CSIS 1,
3 - MIPI DSIM 1.
+"samsung,exynos5420-mipi-video-phy" and "samsung,exynos5433-mipi-video-phy"
+supports additional fifth PHY:
+ 4 - MIPI CSIS 2.
Samsung EXYNOS SoC series Display Port PHY
-------------------------------------------------
diff --git a/drivers/phy/phy-exynos-mipi-video.c b/drivers/phy/phy-exynos-mipi-video.c
index 3cb69e0..cc093eb 100644
--- a/drivers/phy/phy-exynos-mipi-video.c
+++ b/drivers/phy/phy-exynos-mipi-video.c
@@ -1,7 +1,7 @@
/*
* Samsung S5P/EXYNOS SoC series MIPI CSIS/DSIM DPHY driver
*
- * Copyright (C) 2013 Samsung Electronics Co., Ltd.
+ * Copyright (C) 2013,2016 Samsung Electronics Co., Ltd.
* Author: Sylwester Nawrocki <s.nawrocki@samsung.com>
*
* This program is free software; you can redistribute it and/or modify
@@ -13,6 +13,7 @@
#include <linux/io.h>
#include <linux/kernel.h>
#include <linux/mfd/syscon/exynos4-pmu.h>
+#include <linux/mfd/syscon/exynos5-pmu.h>
#include <linux/module.h>
#include <linux/of.h>
#include <linux/of_address.h>
@@ -28,11 +29,15 @@ enum exynos_mipi_phy_id {
EXYNOS_MIPI_PHY_ID_DSIM0,
EXYNOS_MIPI_PHY_ID_CSIS1,
EXYNOS_MIPI_PHY_ID_DSIM1,
+ EXYNOS_MIPI_PHY_ID_CSIS2,
EXYNOS_MIPI_PHYS_NUM
};
enum exynos_mipi_phy_regmap_id {
EXYNOS_MIPI_REGMAP_PMU,
+ EXYNOS_MIPI_REGMAP_DISP,
+ EXYNOS_MIPI_REGMAP_CAM0,
+ EXYNOS_MIPI_REGMAP_CAM1,
EXYNOS_MIPI_REGMAPS_NUM
};
@@ -96,6 +101,122 @@ static const struct mipi_phy_device_desc s5pv210_mipi_phy = {
},
};
+static const struct mipi_phy_device_desc exynos5420_mipi_phy = {
+ .num_regmaps = 1,
+ .regmap_names = {"syscon"},
+ .num_phys = 5,
+ .phys = {
+ {
+ /* EXYNOS_MIPI_PHY_ID_CSIS0 */
+ .coupled_phy_id = EXYNOS_MIPI_PHY_ID_DSIM0,
+ .enable_val = EXYNOS5_PHY_ENABLE,
+ .enable_reg = EXYNOS5420_MIPI_PHY0_CONTROL,
+ .enable_map = EXYNOS_MIPI_REGMAP_PMU,
+ .resetn_val = EXYNOS5_MIPI_PHY_S_RESETN,
+ .resetn_reg = EXYNOS5420_MIPI_PHY0_CONTROL,
+ .resetn_map = EXYNOS_MIPI_REGMAP_PMU,
+ }, {
+ /* EXYNOS_MIPI_PHY_ID_DSIM0 */
+ .coupled_phy_id = EXYNOS_MIPI_PHY_ID_CSIS0,
+ .enable_val = EXYNOS5_PHY_ENABLE,
+ .enable_reg = EXYNOS5420_MIPI_PHY0_CONTROL,
+ .enable_map = EXYNOS_MIPI_REGMAP_PMU,
+ .resetn_val = EXYNOS5_MIPI_PHY_M_RESETN,
+ .resetn_reg = EXYNOS5420_MIPI_PHY0_CONTROL,
+ .resetn_map = EXYNOS_MIPI_REGMAP_PMU,
+ }, {
+ /* EXYNOS_MIPI_PHY_ID_CSIS1 */
+ .coupled_phy_id = EXYNOS_MIPI_PHY_ID_DSIM1,
+ .enable_val = EXYNOS5_PHY_ENABLE,
+ .enable_reg = EXYNOS5420_MIPI_PHY1_CONTROL,
+ .enable_map = EXYNOS_MIPI_REGMAP_PMU,
+ .resetn_val = EXYNOS5_MIPI_PHY_S_RESETN,
+ .resetn_reg = EXYNOS5420_MIPI_PHY1_CONTROL,
+ .resetn_map = EXYNOS_MIPI_REGMAP_PMU,
+ }, {
+ /* EXYNOS_MIPI_PHY_ID_DSIM1 */
+ .coupled_phy_id = EXYNOS_MIPI_PHY_ID_CSIS1,
+ .enable_val = EXYNOS5_PHY_ENABLE,
+ .enable_reg = EXYNOS5420_MIPI_PHY1_CONTROL,
+ .enable_map = EXYNOS_MIPI_REGMAP_PMU,
+ .resetn_val = EXYNOS5_MIPI_PHY_M_RESETN,
+ .resetn_reg = EXYNOS5420_MIPI_PHY1_CONTROL,
+ .resetn_map = EXYNOS_MIPI_REGMAP_PMU,
+ }, {
+ /* EXYNOS_MIPI_PHY_ID_CSIS2 */
+ .coupled_phy_id = EXYNOS_MIPI_PHY_ID_NONE,
+ .enable_val = EXYNOS5_PHY_ENABLE,
+ .enable_reg = EXYNOS5420_MIPI_PHY2_CONTROL,
+ .enable_map = EXYNOS_MIPI_REGMAP_PMU,
+ .resetn_val = EXYNOS5_MIPI_PHY_S_RESETN,
+ .resetn_reg = EXYNOS5420_MIPI_PHY2_CONTROL,
+ .resetn_map = EXYNOS_MIPI_REGMAP_PMU,
+ },
+ },
+};
+
+#define EXYNOS5433_SYSREG_DISP_MIPI_PHY 0x100C
+#define EXYNOS5433_SYSREG_CAM0_MIPI_DPHY_CON 0x1014
+#define EXYNOS5433_SYSREG_CAM1_MIPI_DPHY_CON 0x1020
+
+static const struct mipi_phy_device_desc exynos5433_mipi_phy = {
+ .num_regmaps = 4,
+ .regmap_names = {
+ "samsung,pmu-syscon",
+ "samsung,disp-sysreg",
+ "samsung,cam0-sysreg",
+ "samsung,cam1-sysreg"
+ },
+ .num_phys = 5,
+ .phys = {
+ {
+ /* EXYNOS_MIPI_PHY_ID_CSIS0 */
+ .coupled_phy_id = EXYNOS_MIPI_PHY_ID_DSIM0,
+ .enable_val = EXYNOS5_PHY_ENABLE,
+ .enable_reg = EXYNOS5433_MIPI_PHY0_CONTROL,
+ .enable_map = EXYNOS_MIPI_REGMAP_PMU,
+ .resetn_val = BIT(0),
+ .resetn_reg = EXYNOS5433_SYSREG_CAM0_MIPI_DPHY_CON,
+ .resetn_map = EXYNOS_MIPI_REGMAP_CAM0,
+ }, {
+ /* EXYNOS_MIPI_PHY_ID_DSIM0 */
+ .coupled_phy_id = EXYNOS_MIPI_PHY_ID_CSIS0,
+ .enable_val = EXYNOS5_PHY_ENABLE,
+ .enable_reg = EXYNOS5433_MIPI_PHY0_CONTROL,
+ .enable_map = EXYNOS_MIPI_REGMAP_PMU,
+ .resetn_val = BIT(0),
+ .resetn_reg = EXYNOS5433_SYSREG_DISP_MIPI_PHY,
+ .resetn_map = EXYNOS_MIPI_REGMAP_DISP,
+ }, {
+ /* EXYNOS_MIPI_PHY_ID_CSIS1 */
+ .coupled_phy_id = EXYNOS_MIPI_PHY_ID_NONE,
+ .enable_val = EXYNOS5_PHY_ENABLE,
+ .enable_reg = EXYNOS5433_MIPI_PHY1_CONTROL,
+ .enable_map = EXYNOS_MIPI_REGMAP_PMU,
+ .resetn_val = BIT(1),
+ .resetn_reg = EXYNOS5433_SYSREG_CAM0_MIPI_DPHY_CON,
+ .resetn_map = EXYNOS_MIPI_REGMAP_CAM0,
+ }, {
+ /* EXYNOS_MIPI_PHY_ID_DSIM1 */
+ .coupled_phy_id = EXYNOS_MIPI_PHY_ID_NONE,
+ .enable_val = EXYNOS5_PHY_ENABLE,
+ .enable_reg = EXYNOS5433_MIPI_PHY1_CONTROL,
+ .enable_map = EXYNOS_MIPI_REGMAP_PMU,
+ .resetn_val = BIT(1),
+ .resetn_reg = EXYNOS5433_SYSREG_DISP_MIPI_PHY,
+ .resetn_map = EXYNOS_MIPI_REGMAP_DISP,
+ }, {
+ /* EXYNOS_MIPI_PHY_ID_CSIS2 */
+ .coupled_phy_id = EXYNOS_MIPI_PHY_ID_NONE,
+ .enable_val = EXYNOS5_PHY_ENABLE,
+ .enable_reg = EXYNOS5433_MIPI_PHY2_CONTROL,
+ .enable_map = EXYNOS_MIPI_REGMAP_PMU,
+ .resetn_val = BIT(0),
+ .resetn_reg = EXYNOS5433_SYSREG_CAM1_MIPI_DPHY_CON,
+ .resetn_map = EXYNOS_MIPI_REGMAP_CAM1,
+ },
+ },
+};
struct exynos_mipi_video_phy {
struct regmap *regmaps[EXYNOS_MIPI_REGMAPS_NUM];
@@ -241,6 +362,12 @@ static const struct of_device_id exynos_mipi_video_phy_of_match[] = {
{
.compatible = "samsung,s5pv210-mipi-video-phy",
.data = &s5pv210_mipi_phy,
+ }, {
+ .compatible = "samsung,exynos5420-mipi-video-phy",
+ .data = &exynos5420_mipi_phy,
+ }, {
+ .compatible = "samsung,exynos5433-mipi-video-phy",
+ .data = &exynos5433_mipi_phy,
},
{ /* sentinel */ },
};
diff --git a/include/linux/mfd/syscon/exynos5-pmu.h b/include/linux/mfd/syscon/exynos5-pmu.h
index 9352adc..76f30f9 100644
--- a/include/linux/mfd/syscon/exynos5-pmu.h
+++ b/include/linux/mfd/syscon/exynos5-pmu.h
@@ -38,6 +38,9 @@
/* Exynos5433 specific register definitions */
#define EXYNOS5433_USBHOST30_PHY_CONTROL (0x728)
+#define EXYNOS5433_MIPI_PHY0_CONTROL (0x710)
+#define EXYNOS5433_MIPI_PHY1_CONTROL (0x714)
+#define EXYNOS5433_MIPI_PHY2_CONTROL (0x718)
#define EXYNOS5_PHY_ENABLE BIT(0)
--
1.7.9.5
^ permalink raw reply related [flat|nested] 18+ messages in thread
* Re: [GIT PULL] phy: for 4.7
2016-05-02 4:22 [GIT PULL] phy: for 4.7 Kishon Vijay Abraham I
` (15 preceding siblings ...)
2016-05-02 4:23 ` [PATCH 16/16] phy: exynos-mipi-video: Add support for Exynos 5420 and 5433 SoCs Kishon Vijay Abraham I
@ 2016-05-03 21:51 ` Greg KH
16 siblings, 0 replies; 18+ messages in thread
From: Greg KH @ 2016-05-03 21:51 UTC (permalink / raw)
To: Kishon Vijay Abraham I; +Cc: linux-kernel
On Mon, May 02, 2016 at 09:52:51AM +0530, Kishon Vijay Abraham I wrote:
> Hi Greg,
>
> Please find below the pull request for 4.7 merge window.
>
> It adds a new PHY driver for USB2 PHY on Northstar SoC and
> reuses existing PHY drivers to add support for Broadcom NS2
> SATA3 PHY, MIPI DPHYs in Exynos542x/Exynos5433 SoCs and
> USB3 PHY on mt2701.
>
> Let me know if I have to change something.
>
> Thanks
> Kishon
>
> The following changes since commit 5128de85124c728cdbb6b35bd9dc7410f02c0ca1:
>
> phy: rockchip-emmc: adapt binding to specifiy register offset and length (2016-04-13 18:33:05 +0530)
>
> are available in the git repository at:
>
> git://git.kernel.org/pub/scm/linux/kernel/git/kishon/linux-phy.git tags/phy-for-4.7
Pulled and pushed out, thanks.
greg k-h
^ permalink raw reply [flat|nested] 18+ messages in thread
end of thread, other threads:[~2016-05-03 21:51 UTC | newest]
Thread overview: 18+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2016-05-02 4:22 [GIT PULL] phy: for 4.7 Kishon Vijay Abraham I
2016-05-02 4:22 ` [PATCH 01/16] phy: rcar-gen2: add fallback binding Kishon Vijay Abraham I
2016-05-02 4:22 ` [PATCH 02/16] phy: rcar-gen3-usb2: " Kishon Vijay Abraham I
2016-05-02 4:22 ` [PATCH 03/16] phy: rcar-gen3-usb2, rcar-gen2: Use ARCH_RENESAS Kishon Vijay Abraham I
2016-05-02 4:22 ` [PATCH 04/16] phy: Rename phy-brcmstb-sata driver to phy-brcm-sata driver Kishon Vijay Abraham I
2016-05-02 4:22 ` [PATCH 05/16] phy: Add support for NS2 SATA3 PHY in Broadcom SATA3 PHY driver Kishon Vijay Abraham I
2016-05-02 4:22 ` [PATCH 06/16] dt-bindings: phy: bindings document for common " Kishon Vijay Abraham I
2016-05-02 4:22 ` [PATCH 07/16] phy: rcar-gen3-usb2: remove unnecesary struct rcar_gen3_data Kishon Vijay Abraham I
2016-05-02 4:22 ` [PATCH 08/16] phy: rcar-gen3-usb2: Add vbus-supply to handle VBUS on/off Kishon Vijay Abraham I
2016-05-02 4:23 ` [PATCH 09/16] phy: rcar-gen3-usb2: add extcon support Kishon Vijay Abraham I
2016-05-02 4:23 ` [PATCH 10/16] dt-bindings: phy-mt65xx-usb: add support for mt2701 platform Kishon Vijay Abraham I
2016-05-02 4:23 ` [PATCH 11/16] phy: phy-mt65xx-usb3: " Kishon Vijay Abraham I
2016-05-02 4:23 ` [PATCH 12/16] phy: rockhip-usb: Remove CLK_IS_ROOT Kishon Vijay Abraham I
2016-05-02 4:23 ` [PATCH 13/16] phy: bcm-ns-usb2: new driver for USB 2.0 PHY on Northstar Kishon Vijay Abraham I
2016-05-02 4:23 ` [PATCH 14/16] phy: exynos-mipi-video: Drop support for direct access to PMU Kishon Vijay Abraham I
2016-05-02 4:23 ` [PATCH 15/16] phy: exynos-mipi-video: Rewrite handling of phy registers Kishon Vijay Abraham I
2016-05-02 4:23 ` [PATCH 16/16] phy: exynos-mipi-video: Add support for Exynos 5420 and 5433 SoCs Kishon Vijay Abraham I
2016-05-03 21:51 ` [GIT PULL] phy: for 4.7 Greg KH
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).