LKML Archive on lore.kernel.org
 help / color / Atom feed
From: Andi Kleen <andi@firstfloor.org>
To: acme@kernel.org
Cc: peterz@infradead.org, jolsa@kernel.org, mingo@kernel.org,
	linux-kernel@vger.kernel.org
Subject: Add top down metrics to perf stat
Date: Fri, 13 May 2016 18:44:49 -0700
Message-ID: <1463190297-17408-1-git-send-email-andi@firstfloor.org> (raw)

Note to reviewers: includes both tools and kernel patches.
The kernel patches are at the beginning.

[v2: Address review feedback.
Metrics are now always printed, but colored when crossing threshold.
--topdown implies --metric-only.
Various smaller fixes, see individual patches]
[v3: Add --single-thread option and support it with HT off.
Clean up old HT workaround.
Improve documentation.
Various smaller fixes, see individual patches.]
[v4: Rebased on latest tree]
[v5: Rebased on latest tree. Move debug messages to -vv]
[v6: Rebased. Remove .aggr-per-core and --single-thread to not
break old perf binaries. Put SMT enumeration into 
generic topology API.]
[v7: Address review comments. Change patch title headers.]

This patchkit adds support for TopDown measurements to perf stat
It applies on top of my earlier metrics patchkit, posted
separately.

TopDown is intended to replace the frontend cycles idle/
backend cycles idle metrics in standard perf stat output.
These metrics are not reliable in many workloads, 
due to out of order effects.

This implements a new --topdown mode in perf stat
(similar to --transaction) that measures the pipe line
bottlenecks using standardized formulas. The measurement
can be all done with 5 counters (one fixed counter)

The result are four metrics:
FrontendBound, BackendBound, BadSpeculation, Retiring

that describe the CPU pipeline behavior on a high level.

FrontendBound and BackendBound
BadSpeculation is a higher

The full top down methology has many hierarchical metrics.
This implementation only supports level 1 which can be
collected without multiplexing. A full implementation
of top down on top of perf is available in pmu-tools toplev.
(http://github.com/andikleen/pmu-tools)

The current version works on Intel Core CPUs starting
with Sandy Bridge, and Atom CPUs starting with Silvermont.
In principle the generic metrics should be also implementable
on other out of order CPUs.

TopDown level 1 uses a set of abstracted metrics which
are generic to out of order CPU cores (although some
CPUs may not implement all of them):
    
topdown-total-slots   Available slots in the pipeline
topdown-slots-issued          Slots issued into the pipeline
topdown-slots-retired         Slots successfully retired
topdown-fetch-bubbles         Pipeline gaps in the frontend
topdown-recovery-bubbles  Pipeline gaps during recovery
                          from misspeculation
    
These metrics then allow to compute four useful metrics:
FrontendBound, BackendBound, Retiring, BadSpeculation.
    
The formulas to compute the metrics are generic, they
only change based on the availability on the abstracted
input values.
    
The kernel declares the events supported by the current
CPU and perf stat then computes the formulas based on the
available metrics.


Example output:

$ perf stat --topdown -I 1000 cmd
     1.000735655                   frontend bound       retiring             bad speculation      backend bound        
     1.000735655 S0-C0           2    47.84%              11.69%               8.37%              32.10%           
     1.000735655 S0-C1           2    45.53%              11.39%               8.52%              34.56%           
     2.003978563 S0-C0           2    49.47%              12.22%               8.65%              29.66%           
     2.003978563 S0-C1           2    47.21%              12.98%               8.77%              31.04%           
     3.004901432 S0-C0           2    49.35%              12.26%               8.68%              29.70%           
     3.004901432 S0-C1           2    47.23%              12.67%               8.76%              31.35%           
     4.005766611 S0-C0           2    48.44%              12.14%               8.59%              30.82%           
     4.005766611 S0-C1           2    46.07%              12.41%               8.67%              32.85%           
     5.006580592 S0-C0           2    47.91%              12.08%               8.57%              31.44%           
     5.006580592 S0-C1           2    45.57%              12.27%               8.63%              33.53%           
     6.007545125 S0-C0           2    47.45%              12.02%               8.57%              31.96%           
     6.007545125 S0-C1           2    45.13%              12.17%               8.57%              34.14%           
     7.008539347 S0-C0           2    47.07%              12.03%               8.61%              32.29%           
...


 
For Level 1 Top Down computes metrics per core instead of per logical CPU
on Core CPUs (On Atom CPUs there is no Hyper Threading and TopDown 
is per thread)

In this case perf stat automatically enables --per-core mode and also requires
global mode (-a) and avoiding other filters (no cgroup mode)
One side effect is that this may require root rights or a
kernel.perf_event_paranoid=-1 setting. 

Full tree available in 
git://git.kernel.org/pub/scm/linux/kernel/git/ak/linux-misc perf/top-down-21

             reply index

Thread overview: 31+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-05-14  1:44 Andi Kleen [this message]
2016-05-14  1:44 ` [PATCH 1/8] x86/topology: Add topology_max_smt_threads() Andi Kleen
2016-05-14  1:44 ` [PATCH 2/8] perf/x86: Support sysfs files depending on SMT status Andi Kleen
2016-05-14  1:44 ` [PATCH 3/8] perf/x86/intel: Add Top Down events to Intel Core Andi Kleen
2016-05-14  1:44 ` [PATCH 4/8] perf/x86/intel: Add Top Down events to Intel Atom Andi Kleen
2016-05-14  1:44 ` [PATCH 5/8] perf/x86/intel: Use new topology_max_smt_threads() in HT leak workaround Andi Kleen
2016-05-14  1:44 ` [PATCH 6/8] perf stat: Avoid fractional digits for integer scales Andi Kleen
2016-05-16 12:53   ` Jiri Olsa
2016-05-14  1:44 ` [PATCH 7/8] perf stat: Basic support for TopDown in perf stat Andi Kleen
2016-05-14  1:44 ` [PATCH 8/8] perf stat: Add computation of TopDown formulas Andi Kleen
2016-05-20 10:23   ` Jiri Olsa
2016-05-20 13:38     ` Andi Kleen
2016-05-20 13:43       ` Jiri Olsa
2016-05-20 14:15         ` Andi Kleen
2016-05-20 13:43     ` Andi Kleen
2016-05-16 12:58 ` Add top down metrics to perf stat Jiri Olsa
2016-05-19 23:51   ` Andi Kleen
2016-05-20  9:59     ` Jiri Olsa
2016-05-20 14:18       ` Andi Kleen
2016-05-20 10:24 ` Jiri Olsa
  -- strict thread matches above, loose matches on Subject: below --
2016-05-20  0:09 Andi Kleen
2016-05-05 23:03 Andi Kleen
2016-05-12  7:47 ` Jiri Olsa
2016-04-27 20:00 Andi Kleen
2016-04-04 20:41 Andi Kleen
2016-03-22 23:08 Andi Kleen
2016-03-27 11:27 ` Jiri Olsa
2016-03-27 15:22   ` Andi Kleen
2016-01-20  2:27 Andi Kleen
2016-01-16  1:12 Andi Kleen
2015-08-08  1:06 Andi Kleen

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1463190297-17408-1-git-send-email-andi@firstfloor.org \
    --to=andi@firstfloor.org \
    --cc=acme@kernel.org \
    --cc=jolsa@kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mingo@kernel.org \
    --cc=peterz@infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

LKML Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/lkml/0 lkml/git/0.git
	git clone --mirror https://lore.kernel.org/lkml/1 lkml/git/1.git
	git clone --mirror https://lore.kernel.org/lkml/2 lkml/git/2.git
	git clone --mirror https://lore.kernel.org/lkml/3 lkml/git/3.git
	git clone --mirror https://lore.kernel.org/lkml/4 lkml/git/4.git
	git clone --mirror https://lore.kernel.org/lkml/5 lkml/git/5.git
	git clone --mirror https://lore.kernel.org/lkml/6 lkml/git/6.git
	git clone --mirror https://lore.kernel.org/lkml/7 lkml/git/7.git
	git clone --mirror https://lore.kernel.org/lkml/8 lkml/git/8.git
	git clone --mirror https://lore.kernel.org/lkml/9 lkml/git/9.git
	git clone --mirror https://lore.kernel.org/lkml/10 lkml/git/10.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 lkml lkml/ https://lore.kernel.org/lkml \
		linux-kernel@vger.kernel.org
	public-inbox-index lkml

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-kernel


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git