[PATCH 1/2] clk: samsung: clkout: Add support for Exynos5410

[PATCH 1/2] clk: samsung: clkout: Add support for Exynos5410

[Krzysztof Kozlowski]

Add compatible for Exynos5410 so the PMU on this SoC would provide
CLKOUT.

Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
---
 drivers/clk/samsung/clk-exynos-clkout.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/clk/samsung/clk-exynos-clkout.c b/drivers/clk/samsung/clk-exynos-clkout.c
index 7cd02ff37a1f..96fab6cfb202 100644
--- a/drivers/clk/samsung/clk-exynos-clkout.c
+++ b/drivers/clk/samsung/clk-exynos-clkout.c
@@ -151,6 +151,8 @@ static void __init exynos5_clkout_init(struct device_node *node)
 }
 CLK_OF_DECLARE(exynos5250_clkout, "samsung,exynos5250-pmu",
 		exynos5_clkout_init);
+CLK_OF_DECLARE(exynos5410_clkout, "samsung,exynos5410-pmu",
+		exynos5_clkout_init);
 CLK_OF_DECLARE(exynos5420_clkout, "samsung,exynos5420-pmu",
 		exynos5_clkout_init);
 CLK_OF_DECLARE(exynos5433_clkout, "samsung,exynos5433-pmu",
-- 
1.9.1

[PATCH 2/2] ARM: dts: exynos: Enable CLKOUT on Exynos5410

[Krzysztof Kozlowski]

The CLKOUT (which control is provided by PMU) is necessary for some of
the drivers using this as a clock, e.g. usb3503 USB HUB on Odroid XU
board.

Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
---
 arch/arm/boot/dts/exynos5410.dtsi | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/arch/arm/boot/dts/exynos5410.dtsi b/arch/arm/boot/dts/exynos5410.dtsi
index e9564ab5b5d3..f1effd3f03c4 100644
--- a/arch/arm/boot/dts/exynos5410.dtsi
+++ b/arch/arm/boot/dts/exynos5410.dtsi
@@ -70,6 +70,9 @@
 		pmu_system_controller: system-controller@10040000 {
 			compatible = "samsung,exynos5410-pmu", "syscon";
 			reg = <0x10040000 0x5000>;
+			clock-names = "clkout16";
+			clocks = <&fin_pll>;
+			#clock-cells = <1>;
 		};
 
 		clock: clock-controller@10010000 {
-- 
1.9.1