[PATCH v2 0/10] Add RK3399 eDP support and fix some bugs to analogix_dp driver.

[PATCH v2 0/10] Add RK3399 eDP support and fix some bugs to analogix_dp driver.

[Yakir Yang]

Hi all,

This series have been posted about one month, still no comments, help here :(

RK3399 and RK3288 shared the same eDP IP controller, only some light
difference with VOP configure and GRF configure.

Also same misc fix to analogix_dp driver:
- Hotplug invalid which report by Dan Carpenter
- Make panel detect to an optional action
- correct the register bit define error in ANALOGIX_DP_PLL_REG_1


Changes in v2:
- new patch in v2
- rebase with drm-next, fix some conflicts
- new patch in v2

Yakir Yang (10):
  drm/bridge: analogix_dp: rename RK3288_DP to ROCKCHIP_DP
  drm/rockchip: analogix_dp: split the lcdc select setting into device
    data
  drm/bridge: analogix_dp: correct the register bit define error in
    ANALOGIX_DP_PLL_REG_1
  drm/bridge: analogix_dp: some rockchip chips need to flip REF_CLK bit
    setting
  drm/rockchip: analogix_dp: add rk3399 eDP support
  drm/rockchip: analogix_dp: make panel detect to an optional action
  drm/bridge: analogix_dp: introduce connector mode_valid callback to
    plat driver
  drm/rockchip: analogix_dp: correct the connector display color format
    and bpc
  drm/rockchip: analogix_dp: update the comments about why need to
    hardcode VOP output mode
  drm/bridge: analogix_dp: fix no drm hpd event when panel plug in

 .../bindings/display/bridge/analogix_dp.txt        |   1 +
 .../display/rockchip/analogix_dp-rockchip.txt      |   2 +-
 drivers/gpu/drm/bridge/analogix/analogix_dp_core.c |  19 ++-
 drivers/gpu/drm/bridge/analogix/analogix_dp_core.h |   8 +-
 drivers/gpu/drm/bridge/analogix/analogix_dp_reg.c  |  12 +-
 drivers/gpu/drm/bridge/analogix/analogix_dp_reg.h  |   5 +-
 drivers/gpu/drm/rockchip/analogix_dp-rockchip.c    | 157 ++++++++++++++-------
 include/drm/bridge/analogix_dp.h                   |  10 ++
 8 files changed, 152 insertions(+), 62 deletions(-)

-- 
1.9.1

[PATCH v2 01/10] drm/bridge: analogix_dp: rename RK3288_DP to ROCKCHIP_DP

[Yakir Yang]

Rename RK3288_DP marcos to ROCKCHIP_DP, prepare to add eDP
support for more Rockchip chips.

Signed-off-by: Yakir Yang <ykk@rock-chips.com>
---
Changes in v2: None

 drivers/gpu/drm/bridge/analogix/analogix_dp_core.c | 4 ++--
 drivers/gpu/drm/bridge/analogix/analogix_dp_reg.c  | 6 +++---
 drivers/gpu/drm/rockchip/analogix_dp-rockchip.c    | 2 +-
 include/drm/bridge/analogix_dp.h                   | 2 +-
 4 files changed, 7 insertions(+), 7 deletions(-)

diff --git a/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c b/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c
index 7699597..4a1b3b8 100644
--- a/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c
+++ b/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c
@@ -1207,9 +1207,9 @@ static int analogix_dp_dt_parse_pdata(struct analogix_dp_device *dp)
 	struct video_info *video_info = &dp->video_info;
 
 	switch (dp->plat_data->dev_type) {
-	case RK3288_DP:
+	case ROCKCHIP_DP:
 		/*
-		 * Like Rk3288 DisplayPort TRM indicate that "Main link
+		 * Like Rockchip DisplayPort TRM indicate that "Main link
 		 * containing 4 physical lanes of 2.7/1.62 Gbps/lane".
 		 */
 		video_info->max_link_rate = 0x0A;
diff --git a/drivers/gpu/drm/bridge/analogix/analogix_dp_reg.c b/drivers/gpu/drm/bridge/analogix/analogix_dp_reg.c
index 49205ef..931a76c 100644
--- a/drivers/gpu/drm/bridge/analogix/analogix_dp_reg.c
+++ b/drivers/gpu/drm/bridge/analogix/analogix_dp_reg.c
@@ -74,7 +74,7 @@ void analogix_dp_init_analog_param(struct analogix_dp_device *dp)
 	reg = SEL_24M | TX_DVDD_BIT_1_0625V;
 	writel(reg, dp->reg_base + ANALOGIX_DP_ANALOG_CTL_2);
 
-	if (dp->plat_data && (dp->plat_data->dev_type == RK3288_DP)) {
+	if (dp->plat_data && (dp->plat_data->dev_type == ROCKCHIP_DP)) {
 		writel(REF_CLK_24M, dp->reg_base + ANALOGIX_DP_PLL_REG_1);
 		writel(0x95, dp->reg_base + ANALOGIX_DP_PLL_REG_2);
 		writel(0x40, dp->reg_base + ANALOGIX_DP_PLL_REG_3);
@@ -244,7 +244,7 @@ void analogix_dp_set_analog_power_down(struct analogix_dp_device *dp,
 	u32 reg;
 	u32 phy_pd_addr = ANALOGIX_DP_PHY_PD;
 
-	if (dp->plat_data && (dp->plat_data->dev_type == RK3288_DP))
+	if (dp->plat_data && (dp->plat_data->dev_type == ROCKCHIP_DP))
 		phy_pd_addr = ANALOGIX_DP_PD;
 
 	switch (block) {
@@ -448,7 +448,7 @@ void analogix_dp_init_aux(struct analogix_dp_device *dp)
 	analogix_dp_reset_aux(dp);
 
 	/* Disable AUX transaction H/W retry */
-	if (dp->plat_data && (dp->plat_data->dev_type == RK3288_DP))
+	if (dp->plat_data && (dp->plat_data->dev_type == ROCKCHIP_DP))
 		reg = AUX_BIT_PERIOD_EXPECTED_DELAY(0) |
 		      AUX_HW_RETRY_COUNT_SEL(3) |
 		      AUX_HW_RETRY_INTERVAL_600_MICROSECONDS;
diff --git a/drivers/gpu/drm/rockchip/analogix_dp-rockchip.c b/drivers/gpu/drm/rockchip/analogix_dp-rockchip.c
index 7f6a55c..2bc8a7e 100644
--- a/drivers/gpu/drm/rockchip/analogix_dp-rockchip.c
+++ b/drivers/gpu/drm/rockchip/analogix_dp-rockchip.c
@@ -270,7 +270,7 @@ static int rockchip_dp_bind(struct device *dev, struct device *master,
 
 	dp->plat_data.encoder = &dp->encoder;
 
-	dp->plat_data.dev_type = RK3288_DP;
+	dp->plat_data.dev_type = ROCKCHIP_DP;
 	dp->plat_data.power_on = rockchip_dp_poweron;
 	dp->plat_data.power_off = rockchip_dp_powerdown;
 
diff --git a/include/drm/bridge/analogix_dp.h b/include/drm/bridge/analogix_dp.h
index 25afb31..9e5d013 100644
--- a/include/drm/bridge/analogix_dp.h
+++ b/include/drm/bridge/analogix_dp.h
@@ -15,7 +15,7 @@
 
 enum analogix_dp_devtype {
 	EXYNOS_DP,
-	RK3288_DP,
+	ROCKCHIP_DP,
 };
 
 struct analogix_dp_plat_data {
-- 
1.9.1

[PATCH v2 02/10] drm/rockchip: analogix_dp: split the lcdc select setting into device data

[Yakir Yang]

eDP controller need to declare which vop provide the video source,
and it's defined in GRF registers.

But different chips have different GRF register address, so we need to
create a device data to declare the GRF messages for each chips.

Signed-off-by: Yakir Yang <ykk@rock-chips.com>
---
Changes in v2: None

 drivers/gpu/drm/rockchip/analogix_dp-rockchip.c | 35 ++++++++++++++++++-------
 1 file changed, 26 insertions(+), 9 deletions(-)

diff --git a/drivers/gpu/drm/rockchip/analogix_dp-rockchip.c b/drivers/gpu/drm/rockchip/analogix_dp-rockchip.c
index 2bc8a7e..260c43f 100644
--- a/drivers/gpu/drm/rockchip/analogix_dp-rockchip.c
+++ b/drivers/gpu/drm/rockchip/analogix_dp-rockchip.c
@@ -14,6 +14,7 @@
 
 #include <linux/component.h>
 #include <linux/mfd/syscon.h>
+#include <linux/of_device.h>
 #include <linux/of_graph.h>
 #include <linux/regmap.h>
 #include <linux/reset.h>
@@ -35,11 +36,12 @@
 
 #define to_dp(nm)	container_of(nm, struct rockchip_dp_device, nm)
 
-/* dp grf register offset */
-#define GRF_SOC_CON6                            0x025c
-#define GRF_EDP_LCD_SEL_MASK                    BIT(5)
-#define GRF_EDP_SEL_VOP_LIT                     BIT(5)
-#define GRF_EDP_SEL_VOP_BIG                     0
+struct rockchip_dp_chip_data {
+	u32	lcdsel_grf_reg;
+	u32	lcdsel_big;
+	u32	lcdsel_lit;
+	u32	lcdsel_mask;
+};
 
 struct rockchip_dp_device {
 	struct drm_device        *drm_dev;
@@ -51,6 +53,8 @@ struct rockchip_dp_device {
 	struct regmap            *grf;
 	struct reset_control     *rst;
 
+	const struct rockchip_dp_chip_data *data;
+
 	struct analogix_dp_plat_data plat_data;
 };
 
@@ -119,13 +123,13 @@ static void rockchip_dp_drm_encoder_enable(struct drm_encoder *encoder)
 		return;
 
 	if (ret)
-		val = GRF_EDP_SEL_VOP_LIT | (GRF_EDP_LCD_SEL_MASK << 16);
+		val = dp->data->lcdsel_lit | dp->data->lcdsel_mask;
 	else
-		val = GRF_EDP_SEL_VOP_BIG | (GRF_EDP_LCD_SEL_MASK << 16);
+		val = dp->data->lcdsel_big | dp->data->lcdsel_mask;
 
 	dev_dbg(dp->dev, "vop %s output to dp\n", (ret) ? "LIT" : "BIG");
 
-	ret = regmap_write(dp->grf, GRF_SOC_CON6, val);
+	ret = regmap_write(dp->grf, dp->data->lcdsel_grf_reg, val);
 	if (ret != 0) {
 		dev_err(dp->dev, "Could not write to GRF: %d\n", ret);
 		return;
@@ -246,6 +250,7 @@ static int rockchip_dp_bind(struct device *dev, struct device *master,
 			    void *data)
 {
 	struct rockchip_dp_device *dp = dev_get_drvdata(dev);
+	const struct rockchip_dp_chip_data *dp_data;
 	struct drm_device *drm_dev = data;
 	int ret;
 
@@ -256,10 +261,15 @@ static int rockchip_dp_bind(struct device *dev, struct device *master,
 	 */
 	dev_set_drvdata(dev, NULL);
 
+	dp_data = of_device_get_match_data(dev);
+	if (!dp_data)
+		return -ENODEV;
+
 	ret = rockchip_dp_init(dp);
 	if (ret < 0)
 		return ret;
 
+	dp->data = dp_data;
 	dp->drm_dev = drm_dev;
 
 	ret = rockchip_dp_drm_create_encoder(dp);
@@ -365,8 +375,15 @@ static const struct dev_pm_ops rockchip_dp_pm_ops = {
 	SET_SYSTEM_SLEEP_PM_OPS(rockchip_dp_suspend, rockchip_dp_resume)
 };
 
+static const struct rockchip_dp_chip_data rk3288_dp = {
+	.lcdsel_grf_reg = 0x025c,
+	.lcdsel_big = 0,
+	.lcdsel_lit = BIT(5),
+	.lcdsel_mask = BIT(21),
+};
+
 static const struct of_device_id rockchip_dp_dt_ids[] = {
-	{.compatible = "rockchip,rk3288-dp",},
+	{.compatible = "rockchip,rk3288-dp", .data = &rk3288_dp },
 	{}
 };
 MODULE_DEVICE_TABLE(of, rockchip_dp_dt_ids);
-- 
1.9.1

Re: [PATCH v2 02/10] drm/rockchip: analogix_dp: split the lcdc select setting into device data

[Mark yao]

On 2016年05月24日 13:02, Yakir Yang wrote:
> eDP controller need to declare which vop provide the video source,
> and it's defined in GRF registers.
>
> But different chips have different GRF register address, so we need to
> create a device data to declare the GRF messages for each chips.
>
> Signed-off-by: Yakir Yang<ykk@rock-chips.com>
Looks for me, So:

Acked-by: Mark Yao <mark.yao@rock-chips.com>

-- 
Ｍark Yao

Re: [PATCH v2 02/10] drm/rockchip: analogix_dp: split the lcdc select setting into device data

[Yakir Yang]

Mark,

On 06/01/2016 09:57 AM, Mark yao wrote:
> On 2016年05月24日 13:02, Yakir Yang wrote:
>> eDP controller need to declare which vop provide the video source,
>> and it's defined in GRF registers.
>>
>> But different chips have different GRF register address, so we need to
>> create a device data to declare the GRF messages for each chips.
>>
>> Signed-off-by: Yakir Yang<ykk@rock-chips.com>
> Looks for me, So:
>
> Acked-by: Mark Yao <mark.yao@rock-chips.com>
>

Thanks for your acks ;)

- Yakir

[PATCH v2 03/10] drm/bridge: analogix_dp: correct the register bit define error in ANALOGIX_DP_PLL_REG_1

[Yakir Yang]

There're an register define error in ANALOGIX_DP_PLL_REG_1 which introduced
by commit bcec20fd5ad6 ("drm: bridge: analogix/dp: add some rk3288 special
registers setting").

The PHY PLL input clock source is selected by ANALOGIX_DP_PLL_REG_1
BIT 0, not BIT 1.

Signed-off-by: Yakir Yang <ykk@rock-chips.com>
---
Changes in v2: None

 drivers/gpu/drm/bridge/analogix/analogix_dp_reg.h | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/gpu/drm/bridge/analogix/analogix_dp_reg.h b/drivers/gpu/drm/bridge/analogix/analogix_dp_reg.h
index 337912b..88d56ad 100644
--- a/drivers/gpu/drm/bridge/analogix/analogix_dp_reg.h
+++ b/drivers/gpu/drm/bridge/analogix/analogix_dp_reg.h
@@ -163,8 +163,8 @@
 #define HSYNC_POLARITY_CFG			(0x1 << 0)
 
 /* ANALOGIX_DP_PLL_REG_1 */
-#define REF_CLK_24M				(0x1 << 1)
-#define REF_CLK_27M				(0x0 << 1)
+#define REF_CLK_24M				(0x1 << 0)
+#define REF_CLK_27M				(0x0 << 0)
 
 /* ANALOGIX_DP_LANE_MAP */
 #define LANE3_MAP_LOGIC_LANE_0			(0x0 << 6)
-- 
1.9.1

[PATCH v2 04/10] drm/bridge: analogix_dp: some rockchip chips need to flip REF_CLK bit setting

[Yakir Yang]

As vendor document indicate, when REF_CLK bit set 0, then DP
phy's REF_CLK should switch to 24M source clock.

But due to IC PHY layout mistaken, some chips need to flip this
bit(like RK3288), and unfortunately they didn't indicate in the
DP version register. That's why we have to make this little hack.

Signed-off-by: Yakir Yang <ykk@rock-chips.com>
---
Changes in v2:
- new patch in v2

 drivers/gpu/drm/bridge/analogix/analogix_dp_reg.c | 6 +++++-
 drivers/gpu/drm/bridge/analogix/analogix_dp_reg.h | 1 +
 drivers/gpu/drm/rockchip/analogix_dp-rockchip.c   | 3 +++
 include/drm/bridge/analogix_dp.h                  | 5 +++++
 4 files changed, 14 insertions(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/bridge/analogix/analogix_dp_reg.c b/drivers/gpu/drm/bridge/analogix/analogix_dp_reg.c
index 931a76c..31366bf 100644
--- a/drivers/gpu/drm/bridge/analogix/analogix_dp_reg.c
+++ b/drivers/gpu/drm/bridge/analogix/analogix_dp_reg.c
@@ -75,7 +75,11 @@ void analogix_dp_init_analog_param(struct analogix_dp_device *dp)
 	writel(reg, dp->reg_base + ANALOGIX_DP_ANALOG_CTL_2);
 
 	if (dp->plat_data && (dp->plat_data->dev_type == ROCKCHIP_DP)) {
-		writel(REF_CLK_24M, dp->reg_base + ANALOGIX_DP_PLL_REG_1);
+		reg = REF_CLK_24M;
+		if (dp->plat_data->subdev_type == RK3288_DP)
+			reg = ~reg & REF_CLK_MASK;
+
+		writel(reg, dp->reg_base + ANALOGIX_DP_PLL_REG_1);
 		writel(0x95, dp->reg_base + ANALOGIX_DP_PLL_REG_2);
 		writel(0x40, dp->reg_base + ANALOGIX_DP_PLL_REG_3);
 		writel(0x58, dp->reg_base + ANALOGIX_DP_PLL_REG_4);
diff --git a/drivers/gpu/drm/bridge/analogix/analogix_dp_reg.h b/drivers/gpu/drm/bridge/analogix/analogix_dp_reg.h
index 88d56ad..cdcc6c5 100644
--- a/drivers/gpu/drm/bridge/analogix/analogix_dp_reg.h
+++ b/drivers/gpu/drm/bridge/analogix/analogix_dp_reg.h
@@ -165,6 +165,7 @@
 /* ANALOGIX_DP_PLL_REG_1 */
 #define REF_CLK_24M				(0x1 << 0)
 #define REF_CLK_27M				(0x0 << 0)
+#define REF_CLK_MASK				(0x1 << 0)
 
 /* ANALOGIX_DP_LANE_MAP */
 #define LANE3_MAP_LOGIC_LANE_0			(0x0 << 6)
diff --git a/drivers/gpu/drm/rockchip/analogix_dp-rockchip.c b/drivers/gpu/drm/rockchip/analogix_dp-rockchip.c
index 260c43f..29c4105 100644
--- a/drivers/gpu/drm/rockchip/analogix_dp-rockchip.c
+++ b/drivers/gpu/drm/rockchip/analogix_dp-rockchip.c
@@ -41,6 +41,7 @@ struct rockchip_dp_chip_data {
 	u32	lcdsel_big;
 	u32	lcdsel_lit;
 	u32	lcdsel_mask;
+	u32	chip_type;
 };
 
 struct rockchip_dp_device {
@@ -281,6 +282,7 @@ static int rockchip_dp_bind(struct device *dev, struct device *master,
 	dp->plat_data.encoder = &dp->encoder;
 
 	dp->plat_data.dev_type = ROCKCHIP_DP;
+	dp->plat_data.subdev_type = dp_data->chip_type;
 	dp->plat_data.power_on = rockchip_dp_poweron;
 	dp->plat_data.power_off = rockchip_dp_powerdown;
 
@@ -380,6 +382,7 @@ static const struct rockchip_dp_chip_data rk3288_dp = {
 	.lcdsel_big = 0,
 	.lcdsel_lit = BIT(5),
 	.lcdsel_mask = BIT(21),
+	.chip_type = RK3288_DP,
 };
 
 static const struct of_device_id rockchip_dp_dt_ids[] = {
diff --git a/include/drm/bridge/analogix_dp.h b/include/drm/bridge/analogix_dp.h
index 9e5d013..06c0250 100644
--- a/include/drm/bridge/analogix_dp.h
+++ b/include/drm/bridge/analogix_dp.h
@@ -18,8 +18,13 @@ enum analogix_dp_devtype {
 	ROCKCHIP_DP,
 };
 
+enum analogix_dp_sub_devtype {
+	RK3288_DP,
+};
+
 struct analogix_dp_plat_data {
 	enum analogix_dp_devtype dev_type;
+	enum analogix_dp_sub_devtype subdev_type;
 	struct drm_panel *panel;
 	struct drm_encoder *encoder;
 	struct drm_connector *connector;
-- 
1.9.1

[PATCH v2 05/10] drm/rockchip: analogix_dp: add rk3399 eDP support

[Yakir Yang]

RK3399 and RK3288 shared the same eDP IP controller, only some light
difference with VOP configure and GRF configure.

Signed-off-by: Yakir Yang <ykk@rock-chips.com>
---
Changes in v2:
- rebase with drm-next, fix some conflicts

 .../bindings/display/bridge/analogix_dp.txt        |  1 +
 .../display/rockchip/analogix_dp-rockchip.txt      |  2 +-
 drivers/gpu/drm/rockchip/analogix_dp-rockchip.c    | 34 ++++++++++++++++++++--
 include/drm/bridge/analogix_dp.h                   |  1 +
 4 files changed, 35 insertions(+), 3 deletions(-)

diff --git a/Documentation/devicetree/bindings/display/bridge/analogix_dp.txt b/Documentation/devicetree/bindings/display/bridge/analogix_dp.txt
index 4f2ba8c..4a0f4f7 100644
--- a/Documentation/devicetree/bindings/display/bridge/analogix_dp.txt
+++ b/Documentation/devicetree/bindings/display/bridge/analogix_dp.txt
@@ -5,6 +5,7 @@ Required properties for dp-controller:
 		platform specific such as:
 		 * "samsung,exynos5-dp"
 		 * "rockchip,rk3288-dp"
+		 * "rockchip,rk3399-edp"
 	-reg:
 		physical base address of the controller and length
 		of memory mapped region.
diff --git a/Documentation/devicetree/bindings/display/rockchip/analogix_dp-rockchip.txt b/Documentation/devicetree/bindings/display/rockchip/analogix_dp-rockchip.txt
index e832ff9..5ae55ca 100644
--- a/Documentation/devicetree/bindings/display/rockchip/analogix_dp-rockchip.txt
+++ b/Documentation/devicetree/bindings/display/rockchip/analogix_dp-rockchip.txt
@@ -2,7 +2,7 @@ Rockchip RK3288 specific extensions to the Analogix Display Port
 ================================
 
 Required properties:
-- compatible: "rockchip,rk3288-edp";
+- compatible: "rockchip,rk3288-edp" or "rockchip,rk3399-edp";
 
 - reg: physical base address of the controller and length
 
diff --git a/drivers/gpu/drm/rockchip/analogix_dp-rockchip.c b/drivers/gpu/drm/rockchip/analogix_dp-rockchip.c
index 29c4105..d684c97 100644
--- a/drivers/gpu/drm/rockchip/analogix_dp-rockchip.c
+++ b/drivers/gpu/drm/rockchip/analogix_dp-rockchip.c
@@ -149,6 +149,8 @@ rockchip_dp_drm_encoder_atomic_check(struct drm_encoder *encoder,
 {
 	struct rockchip_crtc_state *s = to_rockchip_crtc_state(crtc_state);
 
+	s->output_type = DRM_MODE_CONNECTOR_eDP;
+
 	/*
 	 * FIXME(Yakir): driver should configure the CRTC output video
 	 * mode with the display information which indicated the monitor
@@ -162,8 +164,27 @@ rockchip_dp_drm_encoder_atomic_check(struct drm_encoder *encoder,
 	 * But if I configure CTRC to RGBaaa, and eDP driver still keep
 	 * RGB666 input video mode, then screen would works prefect.
 	 */
-	s->output_mode = ROCKCHIP_OUT_MODE_AAAA;
-	s->output_type = DRM_MODE_CONNECTOR_eDP;
+
+	ret = drm_of_encoder_active_endpoint_id(dp->dev->of_node, encoder);
+	if (ret < 0)
+		return;
+
+	switch (dp->data->chip_type) {
+	case RK3399_EDP:
+		/*
+		 * For RK3399, VOP Lit must code the out mode to RGB888,
+		 * VOP Big must code the out mode to RGB10.
+		 */
+		if (ret)
+			s->output_mode = ROCKCHIP_OUT_MODE_P888;
+		else
+			s->output_mode = ROCKCHIP_OUT_MODE_AAAA;
+		break;
+
+	default:
+		s->output_mode = ROCKCHIP_OUT_MODE_AAAA;
+		break;
+	}
 
 	return 0;
 }
@@ -377,6 +398,14 @@ static const struct dev_pm_ops rockchip_dp_pm_ops = {
 	SET_SYSTEM_SLEEP_PM_OPS(rockchip_dp_suspend, rockchip_dp_resume)
 };
 
+static const struct rockchip_dp_chip_data rk3399_edp = {
+	.lcdsel_grf_reg = 0x6250,
+	.lcdsel_big = 0,
+	.lcdsel_lit = BIT(5),
+	.lcdsel_mask = BIT(21),
+	.chip_type = RK3399_EDP,
+};
+
 static const struct rockchip_dp_chip_data rk3288_dp = {
 	.lcdsel_grf_reg = 0x025c,
 	.lcdsel_big = 0,
@@ -387,6 +416,7 @@ static const struct rockchip_dp_chip_data rk3288_dp = {
 
 static const struct of_device_id rockchip_dp_dt_ids[] = {
 	{.compatible = "rockchip,rk3288-dp", .data = &rk3288_dp },
+	{.compatible = "rockchip,rk3399-edp", .data = &rk3399_edp },
 	{}
 };
 MODULE_DEVICE_TABLE(of, rockchip_dp_dt_ids);
diff --git a/include/drm/bridge/analogix_dp.h b/include/drm/bridge/analogix_dp.h
index 06c0250..82b8135 100644
--- a/include/drm/bridge/analogix_dp.h
+++ b/include/drm/bridge/analogix_dp.h
@@ -20,6 +20,7 @@ enum analogix_dp_devtype {
 
 enum analogix_dp_sub_devtype {
 	RK3288_DP,
+	RK3399_EDP,
 };
 
 struct analogix_dp_plat_data {
-- 
1.9.1

[PATCH v2 05/10] drm/rockchip: analogix_dp: add rk3399 eDP support

[Yakir Yang]

RK3399 and RK3288 shared the same eDP IP controller, only some light
difference with VOP configure and GRF configure.

Signed-off-by: Yakir Yang <ykk@rock-chips.com>
---
Changes in v2:
- rebase with drm-next, fix some conflicts

 .../bindings/display/bridge/analogix_dp.txt        |  1 +
 .../display/rockchip/analogix_dp-rockchip.txt      |  2 +-
 drivers/gpu/drm/rockchip/analogix_dp-rockchip.c    | 36 ++++++++++++++++++++--
 include/drm/bridge/analogix_dp.h                   |  1 +
 4 files changed, 37 insertions(+), 3 deletions(-)

diff --git a/Documentation/devicetree/bindings/display/bridge/analogix_dp.txt b/Documentation/devicetree/bindings/display/bridge/analogix_dp.txt
index 4f2ba8c..4a0f4f7 100644
--- a/Documentation/devicetree/bindings/display/bridge/analogix_dp.txt
+++ b/Documentation/devicetree/bindings/display/bridge/analogix_dp.txt
@@ -5,6 +5,7 @@ Required properties for dp-controller:
 		platform specific such as:
 		 * "samsung,exynos5-dp"
 		 * "rockchip,rk3288-dp"
+		 * "rockchip,rk3399-edp"
 	-reg:
 		physical base address of the controller and length
 		of memory mapped region.
diff --git a/Documentation/devicetree/bindings/display/rockchip/analogix_dp-rockchip.txt b/Documentation/devicetree/bindings/display/rockchip/analogix_dp-rockchip.txt
index e832ff9..5ae55ca 100644
--- a/Documentation/devicetree/bindings/display/rockchip/analogix_dp-rockchip.txt
+++ b/Documentation/devicetree/bindings/display/rockchip/analogix_dp-rockchip.txt
@@ -2,7 +2,7 @@ Rockchip RK3288 specific extensions to the Analogix Display Port
 ================================
 
 Required properties:
-- compatible: "rockchip,rk3288-edp";
+- compatible: "rockchip,rk3288-edp" or "rockchip,rk3399-edp";
 
 - reg: physical base address of the controller and length
 
diff --git a/drivers/gpu/drm/rockchip/analogix_dp-rockchip.c b/drivers/gpu/drm/rockchip/analogix_dp-rockchip.c
index 29c4105..d5d4e04 100644
--- a/drivers/gpu/drm/rockchip/analogix_dp-rockchip.c
+++ b/drivers/gpu/drm/rockchip/analogix_dp-rockchip.c
@@ -148,6 +148,10 @@ rockchip_dp_drm_encoder_atomic_check(struct drm_encoder *encoder,
 				      struct drm_connector_state *conn_state)
 {
 	struct rockchip_crtc_state *s = to_rockchip_crtc_state(crtc_state);
+	struct rockchip_dp_device *dp = to_dp(encoder);
+	int ret;
+
+	s->output_type = DRM_MODE_CONNECTOR_eDP;
 
 	/*
 	 * FIXME(Yakir): driver should configure the CRTC output video
@@ -162,8 +166,27 @@ rockchip_dp_drm_encoder_atomic_check(struct drm_encoder *encoder,
 	 * But if I configure CTRC to RGBaaa, and eDP driver still keep
 	 * RGB666 input video mode, then screen would works prefect.
 	 */
-	s->output_mode = ROCKCHIP_OUT_MODE_AAAA;
-	s->output_type = DRM_MODE_CONNECTOR_eDP;
+
+	ret = drm_of_encoder_active_endpoint_id(dp->dev->of_node, encoder);
+	if (ret < 0)
+		return;
+
+	switch (dp->data->chip_type) {
+	case RK3399_EDP:
+		/*
+		 * For RK3399, VOP Lit must code the out mode to RGB888,
+		 * VOP Big must code the out mode to RGB10.
+		 */
+		if (ret)
+			s->output_mode = ROCKCHIP_OUT_MODE_P888;
+		else
+			s->output_mode = ROCKCHIP_OUT_MODE_AAAA;
+		break;
+
+	default:
+		s->output_mode = ROCKCHIP_OUT_MODE_AAAA;
+		break;
+	}
 
 	return 0;
 }
@@ -377,6 +400,14 @@ static const struct dev_pm_ops rockchip_dp_pm_ops = {
 	SET_SYSTEM_SLEEP_PM_OPS(rockchip_dp_suspend, rockchip_dp_resume)
 };
 
+static const struct rockchip_dp_chip_data rk3399_edp = {
+	.lcdsel_grf_reg = 0x6250,
+	.lcdsel_big = 0,
+	.lcdsel_lit = BIT(5),
+	.lcdsel_mask = BIT(21),
+	.chip_type = RK3399_EDP,
+};
+
 static const struct rockchip_dp_chip_data rk3288_dp = {
 	.lcdsel_grf_reg = 0x025c,
 	.lcdsel_big = 0,
@@ -387,6 +418,7 @@ static const struct rockchip_dp_chip_data rk3288_dp = {
 
 static const struct of_device_id rockchip_dp_dt_ids[] = {
 	{.compatible = "rockchip,rk3288-dp", .data = &rk3288_dp },
+	{.compatible = "rockchip,rk3399-edp", .data = &rk3399_edp },
 	{}
 };
 MODULE_DEVICE_TABLE(of, rockchip_dp_dt_ids);
diff --git a/include/drm/bridge/analogix_dp.h b/include/drm/bridge/analogix_dp.h
index 06c0250..82b8135 100644
--- a/include/drm/bridge/analogix_dp.h
+++ b/include/drm/bridge/analogix_dp.h
@@ -20,6 +20,7 @@ enum analogix_dp_devtype {
 
 enum analogix_dp_sub_devtype {
 	RK3288_DP,
+	RK3399_EDP,
 };
 
 struct analogix_dp_plat_data {
-- 
1.9.1

Re: [PATCH v2 05/10] drm/rockchip: analogix_dp: add rk3399 eDP support

[Heiko Stuebner]

Am Dienstag, 24. Mai 2016, 14:57:23 schrieb Yakir Yang:
> RK3399 and RK3288 shared the same eDP IP controller, only some light
> difference with VOP configure and GRF configure.
> 
> Signed-off-by: Yakir Yang <ykk@rock-chips.com>
> ---
> Changes in v2:
> - rebase with drm-next, fix some conflicts
> 
>  .../bindings/display/bridge/analogix_dp.txt        |  1 +
>  .../display/rockchip/analogix_dp-rockchip.txt      |  2 +-
>  drivers/gpu/drm/rockchip/analogix_dp-rockchip.c    | 36
> ++++++++++++++++++++-- include/drm/bridge/analogix_dp.h                  
> |  1 +
>  4 files changed, 37 insertions(+), 3 deletions(-)
> 
> diff --git
> a/Documentation/devicetree/bindings/display/bridge/analogix_dp.txt
> b/Documentation/devicetree/bindings/display/bridge/analogix_dp.txt index
> 4f2ba8c..4a0f4f7 100644
> --- a/Documentation/devicetree/bindings/display/bridge/analogix_dp.txt
> +++ b/Documentation/devicetree/bindings/display/bridge/analogix_dp.txt
> @@ -5,6 +5,7 @@ Required properties for dp-controller:
>  		platform specific such as:
>  		 * "samsung,exynos5-dp"
>  		 * "rockchip,rk3288-dp"
> +		 * "rockchip,rk3399-edp"

the cleanlines-freak in my likes to know if there is a difference between 
the rk3399 being called -edp here and -dp on the rk3288 :-)

[...]

> diff --git a/drivers/gpu/drm/rockchip/analogix_dp-rockchip.c
> b/drivers/gpu/drm/rockchip/analogix_dp-rockchip.c index 29c4105..d5d4e04
> 100644
> --- a/drivers/gpu/drm/rockchip/analogix_dp-rockchip.c
> +++ b/drivers/gpu/drm/rockchip/analogix_dp-rockchip.c
> @@ -148,6 +148,10 @@ rockchip_dp_drm_encoder_atomic_check(struct
> drm_encoder *encoder, struct drm_connector_state *conn_state)
>  {
>  	struct rockchip_crtc_state *s = to_rockchip_crtc_state(crtc_state);
> +	struct rockchip_dp_device *dp = to_dp(encoder);
> +	int ret;
> +
> +	s->output_type = DRM_MODE_CONNECTOR_eDP;
> 
>  	/*
>  	 * FIXME(Yakir): driver should configure the CRTC output video
> @@ -162,8 +166,27 @@ rockchip_dp_drm_encoder_atomic_check(struct
> drm_encoder *encoder, * But if I configure CTRC to RGBaaa, and eDP driver
> still keep * RGB666 input video mode, then screen would works prefect.
>  	 */
> -	s->output_mode = ROCKCHIP_OUT_MODE_AAAA;
> -	s->output_type = DRM_MODE_CONNECTOR_eDP;
> +
> +	ret = drm_of_encoder_active_endpoint_id(dp->dev->of_node, encoder);
> +	if (ret < 0)
> +		return;

this needs a value returned (probably ret), otherwise you create a 
warning: ‘return’ with no value, in function returning non-void

drm_of_encoder_active_endpoint_id also always returns -EINVAL on rk3288-
veyron-jerry because encoder->crtc is unset in 
drm_of_encoder_active_endpoint and that breaks display output right now.

Looking through drm code it seems only two functions would set encoder->crtc
- drm_atomic_helper_update_legacy_modeset_state
- drm_crtc_helper_set_config

drm_crtc_helper_set_config callback got dropped in the atomic-conversion and 
the other sounds to be somewhat in the legacy area.

After that drm-internals get a bit confusing.


Heiko

Re: [PATCH v2 05/10] drm/rockchip: analogix_dp: add rk3399 eDP support

[Doug Anderson]

Hi,

On Tue, May 24, 2016 at 3:17 AM, Heiko Stuebner <heiko@sntech.de> wrote:
>> --- a/Documentation/devicetree/bindings/display/bridge/analogix_dp.txt
>> +++ b/Documentation/devicetree/bindings/display/bridge/analogix_dp.txt
>> @@ -5,6 +5,7 @@ Required properties for dp-controller:
>>               platform specific such as:
>>                * "samsung,exynos5-dp"
>>                * "rockchip,rk3288-dp"
>> +              * "rockchip,rk3399-edp"
>
> the cleanlines-freak in my likes to know if there is a difference between
> the rk3399 being called -edp here and -dp on the rk3288 :-)
>
> [...]

If I was a guessing man (which I'm not, but if I was), I'd guess that
this is because on rk3288 there was only one DP port and it was an EDP
port.  ...but since there was only one people just referred to it as
the "DP" port and that was codified in the bindings.  On rk3399 there
are two ports: one EDP and one DP.  All of a sudden we need to
differentiate.

Any better suggestions for how to deal with that?


-Doug

Re: [PATCH v2 05/10] drm/rockchip: analogix_dp: add rk3399 eDP support

[Heiko Stuebner]

Am Dienstag, 24. Mai 2016, 11:12:20 schrieb Doug Anderson:
> Hi,
> 
> On Tue, May 24, 2016 at 3:17 AM, Heiko Stuebner <heiko@sntech.de> wrote:
> >> --- a/Documentation/devicetree/bindings/display/bridge/analogix_dp.txt
> >> +++ b/Documentation/devicetree/bindings/display/bridge/analogix_dp.txt
> >> 
> >> @@ -5,6 +5,7 @@ Required properties for dp-controller:
> >>               platform specific such as:
> >>                * "samsung,exynos5-dp"
> >>                * "rockchip,rk3288-dp"
> >> 
> >> +              * "rockchip,rk3399-edp"
> > 
> > the cleanlines-freak in my likes to know if there is a difference
> > between
> > the rk3399 being called -edp here and -dp on the rk3288 :-)
> > 
> > [...]
> 
> If I was a guessing man (which I'm not, but if I was), I'd guess that
> this is because on rk3288 there was only one DP port and it was an EDP
> port.  ...but since there was only one people just referred to it as
> the "DP" port and that was codified in the bindings.  On rk3399 there
> are two ports: one EDP and one DP.  All of a sudden we need to
> differentiate.
> 
> Any better suggestions for how to deal with that?

nope - everything as it should be in that regard then - the rk3288-dp is 
permanent now anyway.

But it looks like I'm sort of blind blind and only now have seen the 
separate DP controller chapter in the TRM (probably because I somehow didn't 
expect a second controller).

Re: [PATCH v2 05/10] drm/rockchip: analogix_dp: add rk3399 eDP support

[Yakir Yang]

On 05/25/2016 02:23 AM, Heiko Stuebner wrote:
> Am Dienstag, 24. Mai 2016, 11:12:20 schrieb Doug Anderson:
>> Hi,
>>
>> On Tue, May 24, 2016 at 3:17 AM, Heiko Stuebner <heiko@sntech.de> wrote:
>>>> --- a/Documentation/devicetree/bindings/display/bridge/analogix_dp.txt
>>>> +++ b/Documentation/devicetree/bindings/display/bridge/analogix_dp.txt
>>>>
>>>> @@ -5,6 +5,7 @@ Required properties for dp-controller:
>>>>                platform specific such as:
>>>>                 * "samsung,exynos5-dp"
>>>>                 * "rockchip,rk3288-dp"
>>>>
>>>> +              * "rockchip,rk3399-edp"
>>> the cleanlines-freak in my likes to know if there is a difference
>>> between
>>> the rk3399 being called -edp here and -dp on the rk3288 :-)
>>>
>>> [...]
>> If I was a guessing man (which I'm not, but if I was), I'd guess that
>> this is because on rk3288 there was only one DP port and it was an EDP
>> port.  ...but since there was only one people just referred to it as
>> the "DP" port and that was codified in the bindings.  On rk3399 there
>> are two ports: one EDP and one DP.  All of a sudden we need to
>> differentiate.
>>
>> Any better suggestions for how to deal with that?
> nope - everything as it should be in that regard then - the rk3288-dp is
> permanent now anyway.
>
> But it looks like I'm sort of blind blind and only now have seen the
> separate DP controller chapter in the TRM (probably because I somehow didn't
> expect a second controller).
RK3399 eDP controller have cut off the DP-Audio function and DP-HDCP 
function, so it can't be treated as DP interfaces any more, that's why I 
call it "eDP".
>
>

Re: [PATCH v2 05/10] drm/rockchip: analogix_dp: add rk3399 eDP support

[Yakir Yang]

On 05/24/2016 06:17 PM, Heiko Stuebner wrote:
> Am Dienstag, 24. Mai 2016, 14:57:23 schrieb Yakir Yang:
> [........]
>> diff --git a/drivers/gpu/drm/rockchip/analogix_dp-rockchip.c
>> b/drivers/gpu/drm/rockchip/analogix_dp-rockchip.c index 29c4105..d5d4e04
>> 100644
>> --- a/drivers/gpu/drm/rockchip/analogix_dp-rockchip.c
>> +++ b/drivers/gpu/drm/rockchip/analogix_dp-rockchip.c
>> @@ -148,6 +148,10 @@ rockchip_dp_drm_encoder_atomic_check(struct
>> drm_encoder *encoder, struct drm_connector_state *conn_state)
>>   {
>>   	struct rockchip_crtc_state *s = to_rockchip_crtc_state(crtc_state);
>> +	struct rockchip_dp_device *dp = to_dp(encoder);
>> +	int ret;
>> +
>> +	s->output_type = DRM_MODE_CONNECTOR_eDP;
>>
>>   	/*
>>   	 * FIXME(Yakir): driver should configure the CRTC output video
>> @@ -162,8 +166,27 @@ rockchip_dp_drm_encoder_atomic_check(struct
>> drm_encoder *encoder, * But if I configure CTRC to RGBaaa, and eDP driver
>> still keep * RGB666 input video mode, then screen would works prefect.
>>   	 */
>> -	s->output_mode = ROCKCHIP_OUT_MODE_AAAA;
>> -	s->output_type = DRM_MODE_CONNECTOR_eDP;
>> +
>> +	ret = drm_of_encoder_active_endpoint_id(dp->dev->of_node, encoder);
>> +	if (ret < 0)
>> +		return;
> this needs a value returned (probably ret), otherwise you create a
> warning: ‘return’ with no value, in function returning non-void
Done,

Thanks,
- Yakir
>
> drm_of_encoder_active_endpoint_id also always returns -EINVAL on rk3288-
> veyron-jerry because encoder->crtc is unset in
> drm_of_encoder_active_endpoint and that breaks display output right now.
>
> Looking through drm code it seems only two functions would set encoder->crtc
> - drm_atomic_helper_update_legacy_modeset_state
> - drm_crtc_helper_set_config
>
> drm_crtc_helper_set_config callback got dropped in the atomic-conversion and
> the other sounds to be somewhat in the legacy area.
>
> After that drm-internals get a bit confusing.
>
>
> Heiko
>
>
>

Re: [PATCH v2 05/10] drm/rockchip: analogix_dp: add rk3399 eDP support

[Mark yao]

On 2016年05月24日 13:02, Yakir Yang wrote:
> RK3399 and RK3288 shared the same eDP IP controller, only some light
> difference with VOP configure and GRF configure.
>
> Signed-off-by: Yakir Yang <ykk@rock-chips.com>
> ---
> Changes in v2:
> - rebase with drm-next, fix some conflicts
>
>   .../bindings/display/bridge/analogix_dp.txt        |  1 +
>   .../display/rockchip/analogix_dp-rockchip.txt      |  2 +-
>   drivers/gpu/drm/rockchip/analogix_dp-rockchip.c    | 34 ++++++++++++++++++++--
>   include/drm/bridge/analogix_dp.h                   |  1 +
>   4 files changed, 35 insertions(+), 3 deletions(-)
>
>
Looks for me, So for the drm/rockchip side:

Acked-by: Mark Yao <mark.yao@rock-chips.com>

Thanks.

-- 
Ｍark Yao

[PATCH v2 06/10] drm/rockchip: analogix_dp: make panel detect to an optional action

[Yakir Yang]

Some boards don't need to declare a panel device node, like the
display interface is DP monitors, so it's necessary to make the
panel detect to an optional action.

Signed-off-by: Yakir Yang <ykk@rock-chips.com>
---
Changes in v2: None

 drivers/gpu/drm/rockchip/analogix_dp-rockchip.c | 48 ++++++++++++-------------
 1 file changed, 22 insertions(+), 26 deletions(-)

diff --git a/drivers/gpu/drm/rockchip/analogix_dp-rockchip.c b/drivers/gpu/drm/rockchip/analogix_dp-rockchip.c
index d684c97..f29ca3d 100644
--- a/drivers/gpu/drm/rockchip/analogix_dp-rockchip.c
+++ b/drivers/gpu/drm/rockchip/analogix_dp-rockchip.c
@@ -325,38 +325,34 @@ static int rockchip_dp_probe(struct platform_device *pdev)
 {
 	struct device *dev = &pdev->dev;
 	struct device_node *panel_node, *port, *endpoint;
+	struct drm_panel *panel = NULL;
 	struct rockchip_dp_device *dp;
-	struct drm_panel *panel;
 
 	port = of_graph_get_port_by_id(dev->of_node, 1);
-	if (!port) {
-		dev_err(dev, "can't find output port\n");
-		return -EINVAL;
-	}
-
-	endpoint = of_get_child_by_name(port, "endpoint");
-	of_node_put(port);
-	if (!endpoint) {
-		dev_err(dev, "no output endpoint found\n");
-		return -EINVAL;
-	}
-
-	panel_node = of_graph_get_remote_port_parent(endpoint);
-	of_node_put(endpoint);
-	if (!panel_node) {
-		dev_err(dev, "no output node found\n");
-		return -EINVAL;
-	}
-
-	panel = of_drm_find_panel(panel_node);
-	if (!panel) {
-		DRM_ERROR("failed to find panel\n");
+	if (port) {
+		endpoint = of_get_child_by_name(port, "endpoint");
+		of_node_put(port);
+		if (!endpoint) {
+			dev_err(dev, "no output endpoint found\n");
+			return -EINVAL;
+		}
+
+		panel_node = of_graph_get_remote_port_parent(endpoint);
+		of_node_put(endpoint);
+		if (!panel_node) {
+			dev_err(dev, "no output node found\n");
+			return -EINVAL;
+		}
+
+		panel = of_drm_find_panel(panel_node);
+		if (!panel) {
+			DRM_ERROR("failed to find panel\n");
+			of_node_put(panel_node);
+			return -EPROBE_DEFER;
+		}
 		of_node_put(panel_node);
-		return -EPROBE_DEFER;
 	}
 
-	of_node_put(panel_node);
-
 	dp = devm_kzalloc(dev, sizeof(*dp), GFP_KERNEL);
 	if (!dp)
 		return -ENOMEM;
-- 
1.9.1

Re: [PATCH v2 06/10] drm/rockchip: analogix_dp: make panel detect to an optional action

[Mark yao]

On 2016年05月24日 13:02, Yakir Yang wrote:
> Some boards don't need to declare a panel device node, like the
> display interface is DP monitors, so it's necessary to make the
> panel detect to an optional action.
>
> Signed-off-by: Yakir Yang<ykk@rock-chips.com>
> ---
Looks for me, So:

Acked-by: Mark Yao <mark.yao@rock-chips.com>

-- 
Ｍark Yao

[PATCH v2 07/10] drm/bridge: analogix_dp: introduce connector mode_valid callback to plat driver

[Yakir Yang]

It's helpful to expand the mode_valid callback to platform driver,
so they could valid the display mode or information.

Signed-off-by: Yakir Yang <ykk@rock-chips.com>
---
Changes in v2: None

 drivers/gpu/drm/bridge/analogix/analogix_dp_core.c | 15 +++++++++++++++
 include/drm/bridge/analogix_dp.h                   |  4 ++++
 2 files changed, 19 insertions(+)

diff --git a/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c b/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c
index 4a1b3b8..5af9ce4 100644
--- a/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c
+++ b/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c
@@ -943,6 +943,20 @@ int analogix_dp_get_modes(struct drm_connector *connector)
 	return num_modes;
 }
 
+static enum drm_mode_status
+analogix_dp_mode_valid(struct drm_connector *connector,
+		       struct drm_display_mode *mode)
+{
+	struct analogix_dp_device *dp = to_dp(connector);
+	enum drm_mode_status status = MODE_OK;
+
+	if (dp->plat_data->mode_valid)
+		status = dp->plat_data->mode_valid(dp->plat_data, connector,
+						   mode);
+
+	return status;
+}
+
 static struct drm_encoder *
 analogix_dp_best_encoder(struct drm_connector *connector)
 {
@@ -954,6 +968,7 @@ analogix_dp_best_encoder(struct drm_connector *connector)
 static const struct drm_connector_helper_funcs analogix_dp_connector_helper_funcs = {
 	.get_modes = analogix_dp_get_modes,
 	.best_encoder = analogix_dp_best_encoder,
+	.mode_valid = analogix_dp_mode_valid,
 };
 
 enum drm_connector_status
diff --git a/include/drm/bridge/analogix_dp.h b/include/drm/bridge/analogix_dp.h
index 82b8135..9ef89de 100644
--- a/include/drm/bridge/analogix_dp.h
+++ b/include/drm/bridge/analogix_dp.h
@@ -35,6 +35,10 @@ struct analogix_dp_plat_data {
 	int (*attach)(struct analogix_dp_plat_data *, struct drm_bridge *,
 		      struct drm_connector *);
 	int (*get_modes)(struct analogix_dp_plat_data *);
+
+	enum drm_mode_status (*mode_valid)(struct analogix_dp_plat_data *,
+					   struct drm_connector *,
+					   struct drm_display_mode *);
 };
 
 int analogix_dp_resume(struct device *dev);
-- 
1.9.1

[PATCH v2 08/10] drm/rockchip: analogix_dp: correct the connector display color format and bpc

[Yakir Yang]

Rockchip VOP couldn't output YUV video format for eDP controller, so
when driver detect connector support YUV video format, we need to hack
it down to RGB888.

Signed-off-by: Yakir Yang <ykk@rock-chips.com>
---
Changes in v2: None

 drivers/gpu/drm/rockchip/analogix_dp-rockchip.c | 19 +++++++++++++++++++
 1 file changed, 19 insertions(+)

diff --git a/drivers/gpu/drm/rockchip/analogix_dp-rockchip.c b/drivers/gpu/drm/rockchip/analogix_dp-rockchip.c
index f29ca3d..910cceb 100644
--- a/drivers/gpu/drm/rockchip/analogix_dp-rockchip.c
+++ b/drivers/gpu/drm/rockchip/analogix_dp-rockchip.c
@@ -97,6 +97,24 @@ static int rockchip_dp_powerdown(struct analogix_dp_plat_data *plat_data)
 	return 0;
 }
 
+static enum drm_mode_status
+rockchip_dp_mode_valid(struct analogix_dp_plat_data *plat_data,
+		       struct drm_connector *connector,
+		       struct drm_display_mode *mode)
+{
+	struct drm_display_info *di = &connector->display_info;
+
+	if (di->color_formats & DRM_COLOR_FORMAT_YCRCB444 ||
+	    di->color_formats & DRM_COLOR_FORMAT_YCRCB422) {
+		di->color_formats &= ~(DRM_COLOR_FORMAT_YCRCB422 |
+				       DRM_COLOR_FORMAT_YCRCB444);
+		di->color_formats |= DRM_COLOR_FORMAT_RGB444;
+		di->bpc = 8;
+	}
+
+	return MODE_OK;
+}
+
 static bool
 rockchip_dp_drm_encoder_mode_fixup(struct drm_encoder *encoder,
 				   const struct drm_display_mode *mode,
@@ -306,6 +324,7 @@ static int rockchip_dp_bind(struct device *dev, struct device *master,
 	dp->plat_data.subdev_type = dp_data->chip_type;
 	dp->plat_data.power_on = rockchip_dp_poweron;
 	dp->plat_data.power_off = rockchip_dp_powerdown;
+	dp->plat_data.mode_valid = rockchip_dp_mode_valid;
 
 	return analogix_dp_bind(dev, dp->drm_dev, &dp->plat_data);
 }
-- 
1.9.1

Re: [PATCH v2 08/10] drm/rockchip: analogix_dp: correct the connector display color format and bpc

[Mark yao]

On 2016年05月24日 13:02, Yakir Yang wrote:
> Rockchip VOP couldn't output YUV video format for eDP controller, so
> when driver detect connector support YUV video format, we need to hack
> it down to RGB888.
>
> Signed-off-by: Yakir Yang <ykk@rock-chips.com>
> ---
> Changes in v2: None
>
>   drivers/gpu/drm/rockchip/analogix_dp-rockchip.c | 19 +++++++++++++++++++
>   1 file changed, 19 insertions(+)
>
> diff --git a/drivers/gpu/drm/rockchip/analogix_dp-rockchip.c b/drivers/gpu/drm/rockchip/analogix_dp-rockchip.c
> index f29ca3d..910cceb 100644
> --- a/drivers/gpu/drm/rockchip/analogix_dp-rockchip.c
> +++ b/drivers/gpu/drm/rockchip/analogix_dp-rockchip.c
> @@ -97,6 +97,24 @@ static int rockchip_dp_powerdown(struct analogix_dp_plat_data *plat_data)
>   	return 0;
>   }
>   
> +static enum drm_mode_status
> +rockchip_dp_mode_valid(struct analogix_dp_plat_data *plat_data,
> +		       struct drm_connector *connector,
> +		       struct drm_display_mode *mode)
> +{
> +	struct drm_display_info *di = &connector->display_info;
> +
> +	if (di->color_formats & DRM_COLOR_FORMAT_YCRCB444 ||
> +	    di->color_formats & DRM_COLOR_FORMAT_YCRCB422) {
> +		di->color_formats &= ~(DRM_COLOR_FORMAT_YCRCB422 |
> +				       DRM_COLOR_FORMAT_YCRCB444);
> +		di->color_formats |= DRM_COLOR_FORMAT_RGB444;
> +		di->bpc = 8;
> +	}
> +
> +	return MODE_OK;
> +}
> +
>   static bool
>   rockchip_dp_drm_encoder_mode_fixup(struct drm_encoder *encoder,
>   				   const struct drm_display_mode *mode,
> @@ -306,6 +324,7 @@ static int rockchip_dp_bind(struct device *dev, struct device *master,
>   	dp->plat_data.subdev_type = dp_data->chip_type;
>   	dp->plat_data.power_on = rockchip_dp_poweron;
>   	dp->plat_data.power_off = rockchip_dp_powerdown;
> +	dp->plat_data.mode_valid = rockchip_dp_mode_valid;
>   
>   	return analogix_dp_bind(dev, dp->drm_dev, &dp->plat_data);
>   }
Looks for me, So:

Acked-by: Mark Yao <mark.yao@rock-chips.com>

-- 
Ｍark Yao

[PATCH v2 09/10] drm/rockchip: analogix_dp: update the comments about why need to hardcode VOP output mode

[Yakir Yang]

The hardware IC designed that VOP must output the RGB10 video format to
eDP contoller, and if eDP panel only support RGB8, then eDP contoller
should cut down the video data, not via VOP contoller, that's why we need
to hardcode the VOP output mode to RGA10 here.

Signed-off-by: Yakir Yang <ykk@rock-chips.com>
---
Changes in v2:
- new patch in v2

 drivers/gpu/drm/rockchip/analogix_dp-rockchip.c | 16 +++++-----------
 1 file changed, 5 insertions(+), 11 deletions(-)

diff --git a/drivers/gpu/drm/rockchip/analogix_dp-rockchip.c b/drivers/gpu/drm/rockchip/analogix_dp-rockchip.c
index 910cceb..4b64964 100644
--- a/drivers/gpu/drm/rockchip/analogix_dp-rockchip.c
+++ b/drivers/gpu/drm/rockchip/analogix_dp-rockchip.c
@@ -170,17 +170,11 @@ rockchip_dp_drm_encoder_atomic_check(struct drm_encoder *encoder,
 	s->output_type = DRM_MODE_CONNECTOR_eDP;
 
 	/*
-	 * FIXME(Yakir): driver should configure the CRTC output video
-	 * mode with the display information which indicated the monitor
-	 * support colorimetry.
-	 *
-	 * But don't know why the CRTC driver seems could only output the
-	 * RGBaaa rightly. For example, if connect the "innolux,n116bge"
-	 * eDP screen, EDID would indicated that screen only accepted the
-	 * 6bpc mode. But if I configure CRTC to RGB666 output, then eDP
-	 * screen would show a blue picture (RGB888 show a green picture).
-	 * But if I configure CTRC to RGBaaa, and eDP driver still keep
-	 * RGB666 input video mode, then screen would works prefect.
+	 * The hardware IC designed that VOP must output the RGB10 video
+	 * format to eDP contoller, and if eDP panel only support RGB8,
+	 * then eDP contoller should cut down the video data, not via VOP
+	 * contoller, that's why we need to hardcode the VOP output mode
+	 * to RGA10 here.
 	 */
 
 	ret = drm_of_encoder_active_endpoint_id(dp->dev->of_node, encoder);
-- 
1.9.1

Re: [PATCH v2 09/10] drm/rockchip: analogix_dp: update the comments about why need to hardcode VOP output mode

[Mark yao]

On 2016年05月24日 13:02, Yakir Yang wrote:
> The hardware IC designed that VOP must output the RGB10 video format to
> eDP contoller, and if eDP panel only support RGB8, then eDP contoller
> should cut down the video data, not via VOP contoller, that's why we need
> to hardcode the VOP output mode to RGA10 here.
>
> Signed-off-by: Yakir Yang<ykk@rock-chips.com>
Looks for me, So:

Acked-by: Mark Yao <mark.yao@rock-chips.com>

-- 
Ｍark Yao

[PATCH v2 10/10] drm/bridge: analogix_dp: fix no drm hpd event when panel plug in

[Yakir Yang]

The enum value of DP_IRQ_TYPE_HP_CABLE_IN is zero, but driver only
send drm hp event when the irq_type and the enum value is true.

if (irq_type & DP_IRQ_TYPE_HP_CABLE_IN || ...)
	drm_helper_hpd_irq_event(dp->drm_dev);

So there would no drm hpd event when cable plug in, to fix that
just need to assign all hotplug enum with no-zero values.

Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Yakir Yang <ykk@rock-chips.com>
---
Changes in v2: None

 drivers/gpu/drm/bridge/analogix/analogix_dp_core.h | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/gpu/drm/bridge/analogix/analogix_dp_core.h b/drivers/gpu/drm/bridge/analogix/analogix_dp_core.h
index f09275d..b456380 100644
--- a/drivers/gpu/drm/bridge/analogix/analogix_dp_core.h
+++ b/drivers/gpu/drm/bridge/analogix/analogix_dp_core.h
@@ -127,10 +127,10 @@ enum analog_power_block {
 };
 
 enum dp_irq_type {
-	DP_IRQ_TYPE_HP_CABLE_IN,
-	DP_IRQ_TYPE_HP_CABLE_OUT,
-	DP_IRQ_TYPE_HP_CHANGE,
-	DP_IRQ_TYPE_UNKNOWN,
+	DP_IRQ_TYPE_HP_CABLE_IN  = BIT(0),
+	DP_IRQ_TYPE_HP_CABLE_OUT = BIT(1),
+	DP_IRQ_TYPE_HP_CHANGE    = BIT(2),
+	DP_IRQ_TYPE_UNKNOWN      = BIT(3),
 };
 
 struct video_info {
-- 
1.9.1

Re: [PATCH v2 0/10] Add RK3399 eDP support and fix some bugs to analogix_dp driver.

[Yakir Yang]

Hi Javier,

On 05/24/2016 01:01 PM, Yakir Yang wrote:
> Hi all,
>
> This series have been posted about one month, still no comments, help here :(
This series works rightly on Rockchip platform, and most of them haven't 
touch the
common analogix_dp driver (except for the hotplug fixed). So i guess 
Exynos platform
should also happy with this changes.

But not sure about that. So, is it possible that you could help to check 
this on Exynos
Chromebook, if so i would be very grateful about that.

Thanks,
- Yakir
>
> RK3399 and RK3288 shared the same eDP IP controller, only some light
> difference with VOP configure and GRF configure.
>
> Also same misc fix to analogix_dp driver:
> - Hotplug invalid which report by Dan Carpenter
> - Make panel detect to an optional action
> - correct the register bit define error in ANALOGIX_DP_PLL_REG_1
>
>
> Changes in v2:
> - new patch in v2
> - rebase with drm-next, fix some conflicts
> - new patch in v2
>
> Yakir Yang (10):
>    drm/bridge: analogix_dp: rename RK3288_DP to ROCKCHIP_DP
>    drm/rockchip: analogix_dp: split the lcdc select setting into device
>      data
>    drm/bridge: analogix_dp: correct the register bit define error in
>      ANALOGIX_DP_PLL_REG_1
>    drm/bridge: analogix_dp: some rockchip chips need to flip REF_CLK bit
>      setting
>    drm/rockchip: analogix_dp: add rk3399 eDP support
>    drm/rockchip: analogix_dp: make panel detect to an optional action
>    drm/bridge: analogix_dp: introduce connector mode_valid callback to
>      plat driver
>    drm/rockchip: analogix_dp: correct the connector display color format
>      and bpc
>    drm/rockchip: analogix_dp: update the comments about why need to
>      hardcode VOP output mode
>    drm/bridge: analogix_dp: fix no drm hpd event when panel plug in
>
>   .../bindings/display/bridge/analogix_dp.txt        |   1 +
>   .../display/rockchip/analogix_dp-rockchip.txt      |   2 +-
>   drivers/gpu/drm/bridge/analogix/analogix_dp_core.c |  19 ++-
>   drivers/gpu/drm/bridge/analogix/analogix_dp_core.h |   8 +-
>   drivers/gpu/drm/bridge/analogix/analogix_dp_reg.c  |  12 +-
>   drivers/gpu/drm/bridge/analogix/analogix_dp_reg.h  |   5 +-
>   drivers/gpu/drm/rockchip/analogix_dp-rockchip.c    | 157 ++++++++++++++-------
>   include/drm/bridge/analogix_dp.h                   |  10 ++
>   8 files changed, 152 insertions(+), 62 deletions(-)
>

Re: [PATCH v2 0/10] Add RK3399 eDP support and fix some bugs to analogix_dp driver.

[Javier Martinez Canillas]

Hello Yakir,

On 05/26/2016 05:34 AM, Yakir Yang wrote:
> Hi Javier,
> 
> On 05/24/2016 01:01 PM, Yakir Yang wrote:
>> Hi all,
>>
>> This series have been posted about one month, still no comments, help here :(
> This series works rightly on Rockchip platform, and most of them haven't touch the
> common analogix_dp driver (except for the hotplug fixed). So i guess Exynos platform
> should also happy with this changes.
> 
> But not sure about that. So, is it possible that you could help to check this on Exynos
> Chromebook, if so i would be very grateful about that.
>

Of course, I' ll test. Could you please provide me a branch that I can
pull directly to avoid cherry-picking all the patches from the list? 
 
> Thanks,
> - Yakir
>>

Best regards,
-- 
Javier Martinez Canillas
Open Source Group
Samsung Research America

Re: [PATCH v2 0/10] Add RK3399 eDP support and fix some bugs to analogix_dp driver.

[Yakir Yang]

Hi Javier,

On 05/26/2016 08:48 PM, Javier Martinez Canillas wrote:
> Hello Yakir,
>
> On 05/26/2016 05:34 AM, Yakir Yang wrote:
>> Hi Javier,
>>
>> On 05/24/2016 01:01 PM, Yakir Yang wrote:
>>> Hi all,
>>>
>>> This series have been posted about one month, still no comments, help here :(
>> This series works rightly on Rockchip platform, and most of them haven't touch the
>> common analogix_dp driver (except for the hotplug fixed). So i guess Exynos platform
>> should also happy with this changes.
>>
>> But not sure about that. So, is it possible that you could help to check this on Exynos
>> Chromebook, if so i would be very grateful about that.
>>
> Of course, I' ll test. Could you please provide me a branch that I can
> pull directly to avoid cherry-picking all the patches from the list?
>   
Ah, thanks a lot, I do have a tree 
https://github.com/yakir-Yang/linux/tree/fromlist/3399-edp

- Yakir
>> Thanks,
>> - Yakir
> Best regards,

Re: [PATCH v2 0/10] Add RK3399 eDP support and fix some bugs to analogix_dp driver.

[Javier Martinez Canillas]

Hello Yakir,

On 05/27/2016 02:16 AM, Yakir Yang wrote:
> Hi Javier,
> 
> On 05/26/2016 08:48 PM, Javier Martinez Canillas wrote:
>> Hello Yakir,
>>
>> On 05/26/2016 05:34 AM, Yakir Yang wrote:
>>> Hi Javier,
>>>
>>> On 05/24/2016 01:01 PM, Yakir Yang wrote:
>>>> Hi all,
>>>>
>>>> This series have been posted about one month, still no comments, help here :(
>>> This series works rightly on Rockchip platform, and most of them haven't touch the
>>> common analogix_dp driver (except for the hotplug fixed). So i guess Exynos platform
>>> should also happy with this changes.
>>>
>>> But not sure about that. So, is it possible that you could help to check this on Exynos
>>> Chromebook, if so i would be very grateful about that.
>>>
>> Of course, I' ll test. Could you please provide me a branch that I can
>> pull directly to avoid cherry-picking all the patches from the list?
>>   
> Ah, thanks a lot, I do have a tree https://github.com/yakir-Yang/linux/tree/fromlist/3399-edp
>

I tested your branch on an Exynos5800 Peach Pi Chromebook and display
is working correctly. So feel free to add for the whole series:

Tested-by: Javier Martinez Canillas <javier@osg.samsung.com>

Best regards,
-- 
Javier Martinez Canillas
Open Source Group
Samsung Research America

Re: [PATCH v2 0/10] Add RK3399 eDP support and fix some bugs to analogix_dp driver.

[Yakir Yang]

Javier, Mark, Inki, Jingoo

On 06/01/2016 04:01 AM, Javier Martinez Canillas wrote:
> Hello Yakir,
>
> On 05/27/2016 02:16 AM, Yakir Yang wrote:
>> Hi Javier,
>>
>> On 05/26/2016 08:48 PM, Javier Martinez Canillas wrote:
>>> Hello Yakir,
>>>
>>> On 05/26/2016 05:34 AM, Yakir Yang wrote:
>>>> Hi Javier,
>>>>
>>>> On 05/24/2016 01:01 PM, Yakir Yang wrote:
>>>>> Hi all,
>>>>>
>>>>> This series have been posted about one month, still no comments, help here :(
>>>> This series works rightly on Rockchip platform, and most of them haven't touch the
>>>> common analogix_dp driver (except for the hotplug fixed). So i guess Exynos platform
>>>> should also happy with this changes.
>>>>
>>>> But not sure about that. So, is it possible that you could help to check this on Exynos
>>>> Chromebook, if so i would be very grateful about that.
>>>>
>>> Of course, I' ll test. Could you please provide me a branch that I can
>>> pull directly to avoid cherry-picking all the patches from the list?
>>>    
>> Ah, thanks a lot, I do have a tree https://github.com/yakir-Yang/linux/tree/fromlist/3399-edp
>>
> I tested your branch on an Exynos5800 Peach Pi Chromebook and display
> is working correctly. So feel free to add for the whole series:
>
> Tested-by: Javier Martinez Canillas <javier@osg.samsung.com>
Hi Javier,

Thank you very much, it's great to hear that, and make a big step 
forward.   :-D


Hi Mark, Inki, Jingoo

Those patches have been tested on Exynos and Rockchip platform rightly, and

This patches have been touched some rockchip_drm and analogix_dp core
code, it would be great to get some reviewed/acked from you. And for now 
this
patch-set have been tested on Rockchip and Exynos platform rightly, so 
could you
help to share some further comments here ;)


Thanks,
- Yakir
> Best regards,