* [PATCH v2 0/4] hw rng support for NSP SoC
@ 2016-05-27 10:10 Yendapally Reddy Dhananjaya Reddy
2016-05-27 10:10 ` [PATCH v2 1/4] dt-bindings: rng: Northstar Plus SoC rng bindings Yendapally Reddy Dhananjaya Reddy
` (4 more replies)
0 siblings, 5 replies; 9+ messages in thread
From: Yendapally Reddy Dhananjaya Reddy @ 2016-05-27 10:10 UTC (permalink / raw)
To: Rob Herring, Pawel Moll, Mark Rutland, Ian Campbell, Kumar Gala,
Stephen Warren, Lee Jones, Eric Anholt, Russell King, Ray Jui,
Scott Branden, Jon Mason, Matt Mackall, Herbert Xu,
Daniel Thompson, Kieran Bingham, Pankaj Dev, Richard Weinberger,
noltari, Joshua Henderson
Cc: devicetree, linux-rpi-kernel, linux-arm-kernel, linux-kernel,
bcm-kernel-feedback-list, linux-crypto,
Yendapally Reddy Dhananjaya Reddy
This patchset contains the hw random number generator support for the
Broadcom's NSP SoC. The block is similar to the block available in
bcm2835 with different default interrupt mask value. Due to lack of
documentation, I cannot confirm the interrupt mask register details
in bcm2835. In an effort to not break the existing functionality of
bcm2835, I used a different compatible string to mask the interrupt
for NSP SoC. Please let me know. Also supported providing requested
number of random numbers instead of static size of four bytes.
The first patch contains the documentation changes and the second patch
contains the support for rng available in NSP SoC. The third patch
contains the device tree changes for NSP SoC. The fourth patch contains
the support for reading requested number of random numbers.
This patch set has been tested on NSP bcm958625HR board.
This patch set is based on v4.6.0-rc1 and is available from github
repo: https://github.com/Broadcom/cygnus-linux.git
branch: nsp-rng-v2
Changes since v1
Addressed the review comments from Eric
Added acked by Eric
Yendapally Reddy Dhananjaya Reddy (4):
dt-bindings: rng: Northstar Plus SoC rng bindings
hwrng: bcm2835: Support Broadcom NSP SoC rng
ARM: dts: nsp: Add rng device tree entry
hwrng: bcm2835: Read as much data as available
.../devicetree/bindings/rng/brcm,bcm2835.txt | 7 +++-
arch/arm/boot/dts/bcm-nsp.dtsi | 5 +++
drivers/char/hw_random/Kconfig | 2 +-
drivers/char/hw_random/bcm2835-rng.c | 46 +++++++++++++++++++---
4 files changed, 52 insertions(+), 8 deletions(-)
--
2.1.0
^ permalink raw reply [flat|nested] 9+ messages in thread
* [PATCH v2 1/4] dt-bindings: rng: Northstar Plus SoC rng bindings
2016-05-27 10:10 [PATCH v2 0/4] hw rng support for NSP SoC Yendapally Reddy Dhananjaya Reddy
@ 2016-05-27 10:10 ` Yendapally Reddy Dhananjaya Reddy
2016-06-01 14:47 ` Rob Herring
2016-05-27 10:10 ` [PATCH v2 2/4] hwrng: bcm2835: Support Broadcom NSP SoC rng Yendapally Reddy Dhananjaya Reddy
` (3 subsequent siblings)
4 siblings, 1 reply; 9+ messages in thread
From: Yendapally Reddy Dhananjaya Reddy @ 2016-05-27 10:10 UTC (permalink / raw)
To: Rob Herring, Pawel Moll, Mark Rutland, Ian Campbell, Kumar Gala,
Stephen Warren, Lee Jones, Eric Anholt, Russell King, Ray Jui,
Scott Branden, Jon Mason, Matt Mackall, Herbert Xu,
Daniel Thompson, Kieran Bingham, Pankaj Dev, Richard Weinberger,
noltari, Joshua Henderson
Cc: devicetree, linux-rpi-kernel, linux-arm-kernel, linux-kernel,
bcm-kernel-feedback-list, linux-crypto,
Yendapally Reddy Dhananjaya Reddy
Document the bindings used by Northstar Plus(NSP) SoC random number
generator.
Signed-off-by: Yendapally Reddy Dhananjaya Reddy <yendapally.reddy@broadcom.com>
Acked-by: Eric Anholt <eric@anholt.net>
---
Documentation/devicetree/bindings/rng/brcm,bcm2835.txt | 7 ++++++-
1 file changed, 6 insertions(+), 1 deletion(-)
diff --git a/Documentation/devicetree/bindings/rng/brcm,bcm2835.txt b/Documentation/devicetree/bindings/rng/brcm,bcm2835.txt
index 07ccdaa..aa304d4 100644
--- a/Documentation/devicetree/bindings/rng/brcm,bcm2835.txt
+++ b/Documentation/devicetree/bindings/rng/brcm,bcm2835.txt
@@ -2,7 +2,7 @@ BCM2835 Random number generator
Required properties:
-- compatible : should be "brcm,bcm2835-rng"
+- compatible : should be "brcm,bcm2835-rng" or "brcm,bcm-nsp-rng"
- reg : Specifies base physical address and size of the registers.
Example:
@@ -11,3 +11,8 @@ rng {
compatible = "brcm,bcm2835-rng";
reg = <0x7e104000 0x10>;
};
+
+rng@18033000 {
+ compatible = "brcm,bcm-nsp-rng";
+ reg = <0x18033000 0x14>;
+};
--
2.1.0
^ permalink raw reply related [flat|nested] 9+ messages in thread
* [PATCH v2 2/4] hwrng: bcm2835: Support Broadcom NSP SoC rng
2016-05-27 10:10 [PATCH v2 0/4] hw rng support for NSP SoC Yendapally Reddy Dhananjaya Reddy
2016-05-27 10:10 ` [PATCH v2 1/4] dt-bindings: rng: Northstar Plus SoC rng bindings Yendapally Reddy Dhananjaya Reddy
@ 2016-05-27 10:10 ` Yendapally Reddy Dhananjaya Reddy
2016-05-27 10:10 ` [PATCH v2 3/4] ARM: dts: nsp: Add rng device tree entry Yendapally Reddy Dhananjaya Reddy
` (2 subsequent siblings)
4 siblings, 0 replies; 9+ messages in thread
From: Yendapally Reddy Dhananjaya Reddy @ 2016-05-27 10:10 UTC (permalink / raw)
To: Rob Herring, Pawel Moll, Mark Rutland, Ian Campbell, Kumar Gala,
Stephen Warren, Lee Jones, Eric Anholt, Russell King, Ray Jui,
Scott Branden, Jon Mason, Matt Mackall, Herbert Xu,
Daniel Thompson, Kieran Bingham, Pankaj Dev, Richard Weinberger,
noltari, Joshua Henderson
Cc: devicetree, linux-rpi-kernel, linux-arm-kernel, linux-kernel,
bcm-kernel-feedback-list, linux-crypto,
Yendapally Reddy Dhananjaya Reddy
This supports the random number generator available in NSP SoC.
Masks the rng interrupt for NSP.
Signed-off-by: Yendapally Reddy Dhananjaya Reddy <yendapally.reddy@broadcom.com>
Acked-by: Eric Anholt <eric@anholt.net>
---
drivers/char/hw_random/Kconfig | 2 +-
drivers/char/hw_random/bcm2835-rng.c | 34 ++++++++++++++++++++++++++++++----
2 files changed, 31 insertions(+), 5 deletions(-)
diff --git a/drivers/char/hw_random/Kconfig b/drivers/char/hw_random/Kconfig
index 67ee8b0..f8d1a2b 100644
--- a/drivers/char/hw_random/Kconfig
+++ b/drivers/char/hw_random/Kconfig
@@ -90,7 +90,7 @@ config HW_RANDOM_BCM63XX
config HW_RANDOM_BCM2835
tristate "Broadcom BCM2835 Random Number Generator support"
- depends on ARCH_BCM2835
+ depends on ARCH_BCM2835 || ARCH_BCM_NSP
default HW_RANDOM
---help---
This driver provides kernel-side support for the Random Number
diff --git a/drivers/char/hw_random/bcm2835-rng.c b/drivers/char/hw_random/bcm2835-rng.c
index 7192ec2..b1e8b78 100644
--- a/drivers/char/hw_random/bcm2835-rng.c
+++ b/drivers/char/hw_random/bcm2835-rng.c
@@ -19,6 +19,7 @@
#define RNG_CTRL 0x0
#define RNG_STATUS 0x4
#define RNG_DATA 0x8
+#define RNG_INT_MASK 0x10
/* enable rng */
#define RNG_RBGEN 0x1
@@ -26,6 +27,18 @@
/* the initial numbers generated are "less random" so will be discarded */
#define RNG_WARMUP_COUNT 0x40000
+#define RNG_INT_OFF 0x1
+
+static void __init nsp_rng_init(void __iomem *base)
+{
+ u32 val;
+
+ /* mask the interrupt */
+ val = readl(base + RNG_INT_MASK);
+ val |= RNG_INT_OFF;
+ writel(val, base + RNG_INT_MASK);
+}
+
static int bcm2835_rng_read(struct hwrng *rng, void *buf, size_t max,
bool wait)
{
@@ -46,10 +59,18 @@ static struct hwrng bcm2835_rng_ops = {
.read = bcm2835_rng_read,
};
+static const struct of_device_id bcm2835_rng_of_match[] = {
+ { .compatible = "brcm,bcm2835-rng"},
+ { .compatible = "brcm,bcm-nsp-rng", .data = nsp_rng_init},
+ {},
+};
+
static int bcm2835_rng_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
struct device_node *np = dev->of_node;
+ void (*rng_setup)(void __iomem *base);
+ const struct of_device_id *rng_id;
void __iomem *rng_base;
int err;
@@ -61,6 +82,15 @@ static int bcm2835_rng_probe(struct platform_device *pdev)
}
bcm2835_rng_ops.priv = (unsigned long)rng_base;
+ rng_id = of_match_node(bcm2835_rng_of_match, np);
+ if (!rng_id)
+ return -EINVAL;
+
+ /* Check for rng init function, execute it */
+ rng_setup = rng_id->data;
+ if (rng_setup)
+ rng_setup(rng_base);
+
/* set warm-up count & enable */
__raw_writel(RNG_WARMUP_COUNT, rng_base + RNG_STATUS);
__raw_writel(RNG_RBGEN, rng_base + RNG_CTRL);
@@ -90,10 +120,6 @@ static int bcm2835_rng_remove(struct platform_device *pdev)
return 0;
}
-static const struct of_device_id bcm2835_rng_of_match[] = {
- { .compatible = "brcm,bcm2835-rng", },
- {},
-};
MODULE_DEVICE_TABLE(of, bcm2835_rng_of_match);
static struct platform_driver bcm2835_rng_driver = {
--
2.1.0
^ permalink raw reply related [flat|nested] 9+ messages in thread
* [PATCH v2 3/4] ARM: dts: nsp: Add rng device tree entry
2016-05-27 10:10 [PATCH v2 0/4] hw rng support for NSP SoC Yendapally Reddy Dhananjaya Reddy
2016-05-27 10:10 ` [PATCH v2 1/4] dt-bindings: rng: Northstar Plus SoC rng bindings Yendapally Reddy Dhananjaya Reddy
2016-05-27 10:10 ` [PATCH v2 2/4] hwrng: bcm2835: Support Broadcom NSP SoC rng Yendapally Reddy Dhananjaya Reddy
@ 2016-05-27 10:10 ` Yendapally Reddy Dhananjaya Reddy
2016-05-27 10:10 ` [PATCH v2 4/4] hwrng: bcm2835: Read as much data as available Yendapally Reddy Dhananjaya Reddy
2016-05-31 10:19 ` [PATCH v2 0/4] hw rng support for NSP SoC Herbert Xu
4 siblings, 0 replies; 9+ messages in thread
From: Yendapally Reddy Dhananjaya Reddy @ 2016-05-27 10:10 UTC (permalink / raw)
To: Rob Herring, Pawel Moll, Mark Rutland, Ian Campbell, Kumar Gala,
Stephen Warren, Lee Jones, Eric Anholt, Russell King, Ray Jui,
Scott Branden, Jon Mason, Matt Mackall, Herbert Xu,
Daniel Thompson, Kieran Bingham, Pankaj Dev, Richard Weinberger,
noltari, Joshua Henderson
Cc: devicetree, linux-rpi-kernel, linux-arm-kernel, linux-kernel,
bcm-kernel-feedback-list, linux-crypto,
Yendapally Reddy Dhananjaya Reddy
Add support for the random number generator to the Northstar Plus
SoC device tree.
Signed-off-by: Yendapally Reddy Dhananjaya Reddy <yendapally.reddy@broadcom.com>
---
arch/arm/boot/dts/bcm-nsp.dtsi | 5 +++++
1 file changed, 5 insertions(+)
diff --git a/arch/arm/boot/dts/bcm-nsp.dtsi b/arch/arm/boot/dts/bcm-nsp.dtsi
index def9e78..1ed829e 100644
--- a/arch/arm/boot/dts/bcm-nsp.dtsi
+++ b/arch/arm/boot/dts/bcm-nsp.dtsi
@@ -206,6 +206,11 @@
brcm,nand-has-wp;
};
+ rng: rng@33000 {
+ compatible = "brcm,bcm-nsp-rng";
+ reg = <0x33000 0x14>;
+ };
+
ccbtimer0: timer@34000 {
compatible = "arm,sp804";
reg = <0x34000 0x1000>;
--
2.1.0
^ permalink raw reply related [flat|nested] 9+ messages in thread
* [PATCH v2 4/4] hwrng: bcm2835: Read as much data as available
2016-05-27 10:10 [PATCH v2 0/4] hw rng support for NSP SoC Yendapally Reddy Dhananjaya Reddy
` (2 preceding siblings ...)
2016-05-27 10:10 ` [PATCH v2 3/4] ARM: dts: nsp: Add rng device tree entry Yendapally Reddy Dhananjaya Reddy
@ 2016-05-27 10:10 ` Yendapally Reddy Dhananjaya Reddy
2016-05-31 10:19 ` [PATCH v2 0/4] hw rng support for NSP SoC Herbert Xu
4 siblings, 0 replies; 9+ messages in thread
From: Yendapally Reddy Dhananjaya Reddy @ 2016-05-27 10:10 UTC (permalink / raw)
To: Rob Herring, Pawel Moll, Mark Rutland, Ian Campbell, Kumar Gala,
Stephen Warren, Lee Jones, Eric Anholt, Russell King, Ray Jui,
Scott Branden, Jon Mason, Matt Mackall, Herbert Xu,
Daniel Thompson, Kieran Bingham, Pankaj Dev, Richard Weinberger,
noltari, Joshua Henderson
Cc: devicetree, linux-rpi-kernel, linux-arm-kernel, linux-kernel,
bcm-kernel-feedback-list, linux-crypto,
Yendapally Reddy Dhananjaya Reddy
Read the requested number of data from the fifo
Signed-off-by: Yendapally Reddy Dhananjaya Reddy <yendapally.reddy@broadcom.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
---
drivers/char/hw_random/bcm2835-rng.c | 12 ++++++++++--
1 file changed, 10 insertions(+), 2 deletions(-)
diff --git a/drivers/char/hw_random/bcm2835-rng.c b/drivers/char/hw_random/bcm2835-rng.c
index b1e8b78..75ca820 100644
--- a/drivers/char/hw_random/bcm2835-rng.c
+++ b/drivers/char/hw_random/bcm2835-rng.c
@@ -43,6 +43,8 @@ static int bcm2835_rng_read(struct hwrng *rng, void *buf, size_t max,
bool wait)
{
void __iomem *rng_base = (void __iomem *)rng->priv;
+ u32 max_words = max / sizeof(u32);
+ u32 num_words, count;
while ((__raw_readl(rng_base + RNG_STATUS) >> 24) == 0) {
if (!wait)
@@ -50,8 +52,14 @@ static int bcm2835_rng_read(struct hwrng *rng, void *buf, size_t max,
cpu_relax();
}
- *(u32 *)buf = __raw_readl(rng_base + RNG_DATA);
- return sizeof(u32);
+ num_words = readl(rng_base + RNG_STATUS) >> 24;
+ if (num_words > max_words)
+ num_words = max_words;
+
+ for (count = 0; count < num_words; count++)
+ ((u32 *)buf)[count] = readl(rng_base + RNG_DATA);
+
+ return num_words * sizeof(u32);
}
static struct hwrng bcm2835_rng_ops = {
--
2.1.0
^ permalink raw reply related [flat|nested] 9+ messages in thread
* Re: [PATCH v2 0/4] hw rng support for NSP SoC
2016-05-27 10:10 [PATCH v2 0/4] hw rng support for NSP SoC Yendapally Reddy Dhananjaya Reddy
` (3 preceding siblings ...)
2016-05-27 10:10 ` [PATCH v2 4/4] hwrng: bcm2835: Read as much data as available Yendapally Reddy Dhananjaya Reddy
@ 2016-05-31 10:19 ` Herbert Xu
2016-05-31 17:09 ` Florian Fainelli
4 siblings, 1 reply; 9+ messages in thread
From: Herbert Xu @ 2016-05-31 10:19 UTC (permalink / raw)
To: Yendapally Reddy Dhananjaya Reddy
Cc: Rob Herring, Pawel Moll, Mark Rutland, Ian Campbell, Kumar Gala,
Stephen Warren, Lee Jones, Eric Anholt, Russell King, Ray Jui,
Scott Branden, Jon Mason, Matt Mackall, Daniel Thompson,
Kieran Bingham, Pankaj Dev, Richard Weinberger, noltari,
Joshua Henderson, devicetree, linux-rpi-kernel, linux-arm-kernel,
linux-kernel, bcm-kernel-feedback-list, linux-crypto
On Fri, May 27, 2016 at 06:10:37AM -0400, Yendapally Reddy Dhananjaya Reddy wrote:
> This patchset contains the hw random number generator support for the
> Broadcom's NSP SoC. The block is similar to the block available in
> bcm2835 with different default interrupt mask value. Due to lack of
> documentation, I cannot confirm the interrupt mask register details
> in bcm2835. In an effort to not break the existing functionality of
> bcm2835, I used a different compatible string to mask the interrupt
> for NSP SoC. Please let me know. Also supported providing requested
> number of random numbers instead of static size of four bytes.
>
> The first patch contains the documentation changes and the second patch
> contains the support for rng available in NSP SoC. The third patch
> contains the device tree changes for NSP SoC. The fourth patch contains
> the support for reading requested number of random numbers.
>
> This patch set has been tested on NSP bcm958625HR board.
> This patch set is based on v4.6.0-rc1 and is available from github
> repo: https://github.com/Broadcom/cygnus-linux.git
> branch: nsp-rng-v2
>
> Changes since v1
All applied.
--
Email: Herbert Xu <herbert@gondor.apana.org.au>
Home Page: http://gondor.apana.org.au/~herbert/
PGP Key: http://gondor.apana.org.au/~herbert/pubkey.txt
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [PATCH v2 0/4] hw rng support for NSP SoC
2016-05-31 10:19 ` [PATCH v2 0/4] hw rng support for NSP SoC Herbert Xu
@ 2016-05-31 17:09 ` Florian Fainelli
2016-06-01 1:28 ` Herbert Xu
0 siblings, 1 reply; 9+ messages in thread
From: Florian Fainelli @ 2016-05-31 17:09 UTC (permalink / raw)
To: Herbert Xu, Yendapally Reddy Dhananjaya Reddy
Cc: Rob Herring, Pawel Moll, Mark Rutland, Ian Campbell, Kumar Gala,
Stephen Warren, Lee Jones, Eric Anholt, Russell King, Ray Jui,
Scott Branden, Jon Mason, Matt Mackall, Daniel Thompson,
Kieran Bingham, Pankaj Dev, Richard Weinberger, noltari,
Joshua Henderson, devicetree, linux-rpi-kernel, linux-arm-kernel,
linux-kernel, bcm-kernel-feedback-list, linux-crypto
On 05/31/2016 03:19 AM, Herbert Xu wrote:
> On Fri, May 27, 2016 at 06:10:37AM -0400, Yendapally Reddy Dhananjaya Reddy wrote:
>> This patchset contains the hw random number generator support for the
>> Broadcom's NSP SoC. The block is similar to the block available in
>> bcm2835 with different default interrupt mask value. Due to lack of
>> documentation, I cannot confirm the interrupt mask register details
>> in bcm2835. In an effort to not break the existing functionality of
>> bcm2835, I used a different compatible string to mask the interrupt
>> for NSP SoC. Please let me know. Also supported providing requested
>> number of random numbers instead of static size of four bytes.
>>
>> The first patch contains the documentation changes and the second patch
>> contains the support for rng available in NSP SoC. The third patch
>> contains the device tree changes for NSP SoC. The fourth patch contains
>> the support for reading requested number of random numbers.
>>
>> This patch set has been tested on NSP bcm958625HR board.
>> This patch set is based on v4.6.0-rc1 and is available from github
>> repo: https://github.com/Broadcom/cygnus-linux.git
>> branch: nsp-rng-v2
>>
>> Changes since v1
>
> All applied.
FYI, ARM Device Tree patches usually go via ARM SoC pull requests, so it
is best if this is planned in advance. Can you make sure you document
that there could be a merge conflict in your pull request to Linus?
Thanks
--
Florian
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [PATCH v2 0/4] hw rng support for NSP SoC
2016-05-31 17:09 ` Florian Fainelli
@ 2016-06-01 1:28 ` Herbert Xu
0 siblings, 0 replies; 9+ messages in thread
From: Herbert Xu @ 2016-06-01 1:28 UTC (permalink / raw)
To: Florian Fainelli
Cc: Yendapally Reddy Dhananjaya Reddy, Rob Herring, Pawel Moll,
Mark Rutland, Ian Campbell, Kumar Gala, Stephen Warren,
Lee Jones, Eric Anholt, Russell King, Ray Jui, Scott Branden,
Jon Mason, Matt Mackall, Daniel Thompson, Kieran Bingham,
Pankaj Dev, Richard Weinberger, noltari, Joshua Henderson,
devicetree, linux-rpi-kernel, linux-arm-kernel, linux-kernel,
bcm-kernel-feedback-list, linux-crypto
On Tue, May 31, 2016 at 10:09:39AM -0700, Florian Fainelli wrote:
>
> FYI, ARM Device Tree patches usually go via ARM SoC pull requests, so it
> is best if this is planned in advance. Can you make sure you document
> that there could be a merge conflict in your pull request to Linus?
Sure I can do that.
Thanks,
--
Email: Herbert Xu <herbert@gondor.apana.org.au>
Home Page: http://gondor.apana.org.au/~herbert/
PGP Key: http://gondor.apana.org.au/~herbert/pubkey.txt
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [PATCH v2 1/4] dt-bindings: rng: Northstar Plus SoC rng bindings
2016-05-27 10:10 ` [PATCH v2 1/4] dt-bindings: rng: Northstar Plus SoC rng bindings Yendapally Reddy Dhananjaya Reddy
@ 2016-06-01 14:47 ` Rob Herring
0 siblings, 0 replies; 9+ messages in thread
From: Rob Herring @ 2016-06-01 14:47 UTC (permalink / raw)
To: Yendapally Reddy Dhananjaya Reddy
Cc: Pawel Moll, Mark Rutland, Ian Campbell, Kumar Gala,
Stephen Warren, Lee Jones, Eric Anholt, Russell King, Ray Jui,
Scott Branden, Jon Mason, Matt Mackall, Herbert Xu,
Daniel Thompson, Kieran Bingham, Pankaj Dev, Richard Weinberger,
noltari, Joshua Henderson, devicetree, linux-rpi-kernel,
linux-arm-kernel, linux-kernel, bcm-kernel-feedback-list,
linux-crypto
On Fri, May 27, 2016 at 06:10:38AM -0400, Yendapally Reddy Dhananjaya Reddy wrote:
> Document the bindings used by Northstar Plus(NSP) SoC random number
> generator.
>
> Signed-off-by: Yendapally Reddy Dhananjaya Reddy <yendapally.reddy@broadcom.com>
> Acked-by: Eric Anholt <eric@anholt.net>
You missed my ack...
> ---
> Documentation/devicetree/bindings/rng/brcm,bcm2835.txt | 7 ++++++-
> 1 file changed, 6 insertions(+), 1 deletion(-)
^ permalink raw reply [flat|nested] 9+ messages in thread
end of thread, other threads:[~2016-06-01 14:47 UTC | newest]
Thread overview: 9+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2016-05-27 10:10 [PATCH v2 0/4] hw rng support for NSP SoC Yendapally Reddy Dhananjaya Reddy
2016-05-27 10:10 ` [PATCH v2 1/4] dt-bindings: rng: Northstar Plus SoC rng bindings Yendapally Reddy Dhananjaya Reddy
2016-06-01 14:47 ` Rob Herring
2016-05-27 10:10 ` [PATCH v2 2/4] hwrng: bcm2835: Support Broadcom NSP SoC rng Yendapally Reddy Dhananjaya Reddy
2016-05-27 10:10 ` [PATCH v2 3/4] ARM: dts: nsp: Add rng device tree entry Yendapally Reddy Dhananjaya Reddy
2016-05-27 10:10 ` [PATCH v2 4/4] hwrng: bcm2835: Read as much data as available Yendapally Reddy Dhananjaya Reddy
2016-05-31 10:19 ` [PATCH v2 0/4] hw rng support for NSP SoC Herbert Xu
2016-05-31 17:09 ` Florian Fainelli
2016-06-01 1:28 ` Herbert Xu
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).