* [PATCH v3 0/2] [media] atmel-isc: add driver for Atmel ISC
@ 2016-05-31 6:58 Songjun Wu
2016-05-31 6:58 ` [PATCH v3 1/2] [media] atmel-isc: add the Image Sensor Controller code Songjun Wu
` (2 more replies)
0 siblings, 3 replies; 8+ messages in thread
From: Songjun Wu @ 2016-05-31 6:58 UTC (permalink / raw)
To: g.liakhovetski, laurent.pinchart, nicolas.ferre, robh
Cc: linux-arm-kernel, Songjun Wu, Fabien Dessenne, Ian Campbell,
devicetree, Mauro Carvalho Chehab, Richard Röjfors,
Benoit Parrot, Kumar Gala, linux-kernel, Mikhail Ulyanov,
Sudip Mukherjee, Rob Herring, Pawel Moll, Peter Griffin,
Geert Uytterhoeven, Hans Verkuil, Mark Rutland, linux-media,
Simon Horman
The Image Sensor Controller driver includes two parts.
1) Driver code to implement the ISC function.
2) Device tree binding documentation, it describes how
to add the ISC in device tree.
Changes in v3:
- Add pm runtime feature.
- Modify the isc clock code since the dt is changed.
- Remove the 'atmel,sensor-preferred'.
- Modify the isc clock node according to the Rob's remarks.
Changes in v2:
- Add "depends on COMMON_CLK" and "VIDEO_V4L2_SUBDEV_API"
in Kconfig file.
- Correct typos and coding style according to Laurent's remarks.
- Delete the loop while in 'isc_clk_enable' function.
- Replace 'hsync_active', 'vsync_active' and 'pclk_sample'
with 'pfe_cfg0' in struct isc_subdev_entity.
- Add the code to support VIDIOC_CREATE_BUFS in
'isc_queue_setup' function.
- Invoke isc_config to configure register in
'isc_start_streaming' function.
- Add the struct completion 'comp' to synchronize with
the frame end interrupt in 'isc_stop_streaming' function.
- Check the return value of the clk_prepare_enable
in 'isc_open' function.
- Set the default format in 'isc_open' function.
- Add an exit condition in the loop while in 'isc_config'.
- Delete the hardware setup operation in 'isc_set_format'.
- Refuse format modification during streaming
in 'isc_s_fmt_vid_cap' function.
- Invoke v4l2_subdev_alloc_pad_config to allocate and
initialize the pad config in 'isc_async_complete' function.
- Remove the '.owner = THIS_MODULE,' in atmel_isc_driver.
- Replace the module_platform_driver_probe() with
module_platform_driver().
- Remove the unit address of the endpoint.
- Add the unit address to the clock node.
- Avoid using underscores in node names.
- Drop the "0x" in the unit address of the i2c node.
- Modify the description of 'atmel,sensor-preferred'.
- Add the description for the ISC internal clock.
Songjun Wu (2):
[media] atmel-isc: add the Image Sensor Controller code
[media] atmel-isc: DT binding for Image Sensor Controller driver
.../devicetree/bindings/media/atmel-isc.txt | 88 ++
drivers/media/platform/Kconfig | 1 +
drivers/media/platform/Makefile | 2 +
drivers/media/platform/atmel/Kconfig | 9 +
drivers/media/platform/atmel/Makefile | 1 +
drivers/media/platform/atmel/atmel-isc-regs.h | 276 ++++
drivers/media/platform/atmel/atmel-isc.c | 1610 ++++++++++++++++++++
7 files changed, 1987 insertions(+)
create mode 100644 Documentation/devicetree/bindings/media/atmel-isc.txt
create mode 100644 drivers/media/platform/atmel/Kconfig
create mode 100644 drivers/media/platform/atmel/Makefile
create mode 100644 drivers/media/platform/atmel/atmel-isc-regs.h
create mode 100644 drivers/media/platform/atmel/atmel-isc.c
--
2.7.4
^ permalink raw reply [flat|nested] 8+ messages in thread
* [PATCH v3 1/2] [media] atmel-isc: add the Image Sensor Controller code
2016-05-31 6:58 [PATCH v3 0/2] [media] atmel-isc: add driver for Atmel ISC Songjun Wu
@ 2016-05-31 6:58 ` Songjun Wu
2016-05-31 6:58 ` [PATCH v3 2/2] [media] atmel-isc: DT binding for Image Sensor Controller driver Songjun Wu
2016-05-31 7:17 ` [PATCH v3 0/2] [media] atmel-isc: add driver for Atmel ISC Geert Uytterhoeven
2 siblings, 0 replies; 8+ messages in thread
From: Songjun Wu @ 2016-05-31 6:58 UTC (permalink / raw)
To: g.liakhovetski, laurent.pinchart, nicolas.ferre, robh
Cc: linux-arm-kernel, Songjun Wu, Fabien Dessenne,
Mauro Carvalho Chehab, Richard Röjfors, Benoit Parrot,
linux-kernel, Mikhail Ulyanov, Sudip Mukherjee, Peter Griffin,
Geert Uytterhoeven, Hans Verkuil, linux-media, Simon Horman
Add driver for the Image Sensor Controller. It manages
incoming data from a parallel based CMOS/CCD sensor.
It has an internal image processor, also integrates a
triple channel direct memory access controller master
interface.
Signed-off-by: Songjun Wu <songjun.wu@atmel.com>
---
Changes in v3:
- Add pm runtime feature.
- Modify the isc clock code since the dt is changed.
Changes in v2:
- Add "depends on COMMON_CLK" and "VIDEO_V4L2_SUBDEV_API"
in Kconfig file.
- Correct typos and coding style according to Laurent's remarks.
- Delete the loop while in 'isc_clk_enable' function.
- Replace 'hsync_active', 'vsync_active' and 'pclk_sample'
with 'pfe_cfg0' in struct isc_subdev_entity.
- Add the code to support VIDIOC_CREATE_BUFS in
'isc_queue_setup' function.
- Invoke isc_config to configure register in
'isc_start_streaming' function.
- Add the struct completion 'comp' to synchronize with
the frame end interrupt in 'isc_stop_streaming' function.
- Check the return value of the clk_prepare_enable
in 'isc_open' function.
- Set the default format in 'isc_open' function.
- Add an exit condition in the loop while in 'isc_config'.
- Delete the hardware setup operation in 'isc_set_format'.
- Refuse format modification during streaming
in 'isc_s_fmt_vid_cap' function.
- Invoke v4l2_subdev_alloc_pad_config to allocate and
initialize the pad config in 'isc_async_complete' function.
- Remove the '.owner = THIS_MODULE,' in atmel_isc_driver.
- Replace the module_platform_driver_probe() with
module_platform_driver().
drivers/media/platform/Kconfig | 1 +
drivers/media/platform/Makefile | 2 +
drivers/media/platform/atmel/Kconfig | 9 +
drivers/media/platform/atmel/Makefile | 1 +
drivers/media/platform/atmel/atmel-isc-regs.h | 276 +++++
drivers/media/platform/atmel/atmel-isc.c | 1610 +++++++++++++++++++++++++
6 files changed, 1899 insertions(+)
create mode 100644 drivers/media/platform/atmel/Kconfig
create mode 100644 drivers/media/platform/atmel/Makefile
create mode 100644 drivers/media/platform/atmel/atmel-isc-regs.h
create mode 100644 drivers/media/platform/atmel/atmel-isc.c
diff --git a/drivers/media/platform/Kconfig b/drivers/media/platform/Kconfig
index 84e041c..91d7aea 100644
--- a/drivers/media/platform/Kconfig
+++ b/drivers/media/platform/Kconfig
@@ -110,6 +110,7 @@ source "drivers/media/platform/exynos4-is/Kconfig"
source "drivers/media/platform/s5p-tv/Kconfig"
source "drivers/media/platform/am437x/Kconfig"
source "drivers/media/platform/xilinx/Kconfig"
+source "drivers/media/platform/atmel/Kconfig"
config VIDEO_TI_CAL
tristate "TI CAL (Camera Adaptation Layer) driver"
diff --git a/drivers/media/platform/Makefile b/drivers/media/platform/Makefile
index bbb7bd1..ad8f471 100644
--- a/drivers/media/platform/Makefile
+++ b/drivers/media/platform/Makefile
@@ -55,4 +55,6 @@ obj-$(CONFIG_VIDEO_AM437X_VPFE) += am437x/
obj-$(CONFIG_VIDEO_XILINX) += xilinx/
+obj-$(CONFIG_VIDEO_ATMEL_ISC) += atmel/
+
ccflags-y += -I$(srctree)/drivers/media/i2c
diff --git a/drivers/media/platform/atmel/Kconfig b/drivers/media/platform/atmel/Kconfig
new file mode 100644
index 0000000..867dca2
--- /dev/null
+++ b/drivers/media/platform/atmel/Kconfig
@@ -0,0 +1,9 @@
+config VIDEO_ATMEL_ISC
+ tristate "ATMEL Image Sensor Controller (ISC) support"
+ depends on VIDEO_V4L2 && COMMON_CLK && VIDEO_V4L2_SUBDEV_API && HAS_DMA
+ depends on ARCH_AT91 || COMPILE_TEST
+ select VIDEOBUF2_DMA_CONTIG
+ select REGMAP_MMIO
+ help
+ This module makes the ATMEL Image Sensor Controller available
+ as a v4l2 device.
\ No newline at end of file
diff --git a/drivers/media/platform/atmel/Makefile b/drivers/media/platform/atmel/Makefile
new file mode 100644
index 0000000..9d7c999
--- /dev/null
+++ b/drivers/media/platform/atmel/Makefile
@@ -0,0 +1 @@
+obj-$(CONFIG_VIDEO_ATMEL_ISC) += atmel-isc.o
diff --git a/drivers/media/platform/atmel/atmel-isc-regs.h b/drivers/media/platform/atmel/atmel-isc-regs.h
new file mode 100644
index 0000000..dda9396
--- /dev/null
+++ b/drivers/media/platform/atmel/atmel-isc-regs.h
@@ -0,0 +1,276 @@
+#ifndef __ATMEL_ISC_REGS_H
+#define __ATMEL_ISC_REGS_H
+
+#include <linux/bitops.h>
+
+/* ISC Control Enable Register 0 */
+#define ISC_CTRLEN 0x00000000
+
+#define ISC_CTRLEN_CAPTURE BIT(0)
+#define ISC_CTRLEN_CAPTURE_MASK BIT(0)
+
+#define ISC_CTRLEN_UPPRO BIT(1)
+#define ISC_CTRLEN_UPPRO_MASK BIT(1)
+
+#define ISC_CTRLEN_HISREQ BIT(2)
+#define ISC_CTRLEN_HISREQ_MASK BIT(2)
+
+#define ISC_CTRLEN_HISCLR BIT(3)
+#define ISC_CTRLEN_HISCLR_MASK BIT(3)
+
+/* ISC Control Disable Register 0 */
+#define ISC_CTRLDIS 0x00000004
+
+#define ISC_CTRLDIS_DISABLE BIT(0)
+#define ISC_CTRLDIS_DISABLE_MASK BIT(0)
+
+#define ISC_CTRLDIS_SWRST BIT(8)
+#define ISC_CTRLDIS_SWRST_MASK BIT(8)
+
+/* ISC Control Status Register 0 */
+#define ISC_CTRLSR 0x00000008
+
+#define ISC_CTRLSR_CAPTURE BIT(0)
+#define ISC_CTRLSR_UPPRO BIT(1)
+#define ISC_CTRLSR_HISREQ BIT(2)
+#define ISC_CTRLSR_FIELD BIT(4)
+#define ISC_CTRLSR_SIP BIT(31)
+
+/* ISC Parallel Front End Configuration 0 Register */
+#define ISC_PFE_CFG0 0x0000000c
+
+#define ISC_PFE_CFG0_HPOL_LOW BIT(0)
+#define ISC_PFE_CFG0_HPOL_HIGH 0x0
+#define ISC_PFE_CFG0_HPOL_MASK BIT(0)
+
+#define ISC_PFE_CFG0_VPOL_LOW BIT(1)
+#define ISC_PFE_CFG0_VPOL_HIGH 0x0
+#define ISC_PFE_CFG0_VPOL_MASK BIT(1)
+
+#define ISC_PFE_CFG0_PPOL_LOW BIT(2)
+#define ISC_PFE_CFG0_PPOL_HIGH 0x0
+#define ISC_PFE_CFG0_PPOL_MASK BIT(2)
+
+#define ISC_PFE_CFG0_MODE_PROGRESSIVE 0x0
+#define ISC_PFE_CFG0_MODE_MASK GENMASK(6, 4)
+
+#define ISC_PFE_CFG0_BPS_EIGHT (0x4 << 28)
+#define ISC_PFG_CFG0_BPS_NINE (0x3 << 28)
+#define ISC_PFG_CFG0_BPS_TEN (0x2 << 28)
+#define ISC_PFG_CFG0_BPS_ELEVEN (0x1 << 28)
+#define ISC_PFG_CFG0_BPS_TWELVE 0x0
+#define ISC_PFE_CFG0_BPS_MASK GENMASK(30, 28)
+
+/* ISC Clock Enable Register */
+#define ISC_CLKEN 0x00000018
+#define ISC_CLKEN_EN 0x1
+#define ISC_CLKEN_EN_SHIFT(n) (n)
+#define ISC_CLKEN_EN_MASK(n) BIT(n)
+
+/* ISC Clock Disable Register */
+#define ISC_CLKDIS 0x0000001c
+#define ISC_CLKDIS_DIS 0x1
+#define ISC_CLKDIS_DIS_SHIFT(n) (n)
+#define ISC_CLKDIS_DIS_MASK(n) BIT(n)
+
+/* ISC Clock Status Register */
+#define ISC_CLKSR 0x00000020
+#define ISC_CLKSR_CLK_MASK(n) BIT(n)
+#define ISC_CLKSR_SIP_PROGRESS BIT(31)
+
+/* ISC Clock Configuration Register */
+#define ISC_CLKCFG 0x00000024
+#define ISC_CLKCFG_DIV_SHIFT(n) ((n)*16)
+#define ISC_CLKCFG_DIV_MASK(n) GENMASK(((n)*16 + 7), (n)*16)
+#define ISC_CLKCFG_SEL_SHIFT(n) ((n)*16 + 8)
+#define ISC_CLKCFG_SEL_MASK(n) GENMASK(((n)*17 + 8), ((n)*16 + 8))
+
+/* ISC Interrupt Enable Register */
+#define ISC_INTEN 0x00000028
+
+#define ISC_INTEN_DDONE BIT(8)
+#define ISC_INTEN_DDONE_MASK BIT(8)
+
+/* ISC Interrupt Disable Register */
+#define ISC_INTDIS 0x0000002c
+
+#define ISC_INTDIS_DDONE BIT(8)
+#define ISC_INTDIS_DDONE_MASK BIT(8)
+
+/* ISC Interrupt Mask Register */
+#define ISC_INTMASK 0x00000030
+
+/* ISC Interrupt Status Register */
+#define ISC_INTSR 0x00000034
+
+#define ISC_INTSR_DDONE BIT(8)
+
+/* ISC White Balance Control Register */
+#define ISC_WB_CTRL 0x00000058
+
+#define ISC_WB_CTRL_EN BIT(0)
+#define ISC_WB_CTRL_DIS 0x0
+#define ISC_WB_CTRL_MASK BIT(0)
+
+/* ISC White Balance Configuration Register */
+#define ISC_WB_CFG 0x0000005c
+
+#define ISC_WB_CFG_BAYCFG_GRGR 0x0
+#define ISC_WB_CFG_BAYCFG_RGRG 0x1
+#define ISC_WB_CFG_BAYCFG_GBGB 0x2
+#define ISC_WB_CFG_BAYCFG_BGBG 0x3
+#define ISC_WB_CFG_BAYCFG_MASK GENMASK(1, 0)
+
+/* ISC Color Filter Array Control Register */
+#define ISC_CFA_CTRL 0x00000070
+
+#define ISC_CFA_CTRL_EN BIT(0)
+#define ISC_CFA_CTRL_DIS 0x0
+#define ISC_CFA_CTRL_MASK BIT(0)
+
+/* ISC Color Filter Array Configuration Register */
+#define ISC_CFA_CFG 0x00000074
+
+#define ISC_CFA_CFG_BAY_GRGR 0x0
+#define ISC_CFA_CFG_BAY_RGRG 0x1
+#define ISC_CFA_CFG_BAY_GBGB 0x2
+#define ISC_CFA_CFG_BAY_BGBG 0x3
+#define ISC_CFA_CFG_BAY_MASK GENMASK(1, 0)
+
+/* ISC Color Correction Control Register */
+#define ISC_CC_CTRL 0x00000078
+
+#define ISC_CC_CTRL_EN BIT(0)
+#define ISC_CC_CTRL_DIS 0x0
+#define ISC_CC_CTRL_MASK BIT(0)
+
+/* ISC Gamma Correction Control Register */
+#define ISC_GAM_CTRL 0x00000094
+
+#define ISC_GAM_CTRL_EN BIT(0)
+#define ISC_GAM_CTRL_DIS 0x0
+#define ISC_GAM_CTRL_MASK BIT(0)
+
+#define ISC_GAM_CTRL_B_EN BIT(1)
+#define ISC_GAM_CTRL_B_DIS 0x0
+#define ISC_GAM_CTRL_B_MASK BIT(1)
+
+#define ISC_GAM_CTRL_G_EN BIT(2)
+#define ISC_GAM_CTRL_G_DIS 0x0
+#define ISC_GAM_CTRL_G_MASK BIT(2)
+
+#define ISC_GAM_CTRL_R_EN BIT(3)
+#define ISC_GAM_CTRL_R_DIS 0x0
+#define ISC_GAM_CTRL_R_MASK BIT(3)
+
+#define ISC_GAM_CTRL_ALL_CHAN_MASK (ISC_GAM_CTRL_B_MASK | \
+ ISC_GAM_CTRL_G_MASK | \
+ ISC_GAM_CTRL_R_MASK)
+
+/* Color Space Conversion Control Register */
+#define ISC_CSC_CTRL 0x00000398
+
+#define ISC_CSC_CTRL_EN BIT(0)
+#define ISC_CSC_CTRL_DIS 0x0
+#define ISC_CSC_CTRL_MASK BIT(0)
+
+/* Contrast And Brightness Control Register */
+#define ISC_CBC_CTRL 0x000003b4
+
+#define ISC_CBC_CTRL_EN BIT(0)
+#define ISC_CBC_CTRL_DIS 0x0
+#define ISC_CBC_CTRL_MASK BIT(0)
+
+/* Subsampling 4:4:4 to 4:2:2 Control Register */
+#define ISC_SUB422_CTRL 0x000003c4
+
+#define ISC_SUB422_CTRL_EN BIT(0)
+#define ISC_SUB422_CTRL_DIS 0x0
+#define ISC_SUB422_CTRL_MASK BIT(0)
+
+/* Subsampling 4:2:2 to 4:2:0 Control Register */
+#define ISC_SUB420_CTRL 0x000003cc
+
+#define ISC_SUB420_CTRL_EN BIT(0)
+#define ISC_SUB420_CTRL_DIS 0x0
+#define ISC_SUB420_CTRL_MASK BIT(0)
+
+#define ISC_SUB420_CTRL_FILTER_PROG 0x0
+#define ISC_SUB420_CTRL_FILTER_INTER BIT(4)
+#define ISC_SUB420_CTRL_FILTER_MASK BIT(4)
+
+/* Rounding, Limiting and Packing Configuration Register */
+#define ISC_RLP_CFG 0x000003d0
+
+#define ISC_RLP_CFG_MODE_DAT8 0x0
+#define ISC_RLP_CFG_MODE_DAT9 0x1
+#define ISC_RLP_CFG_MODE_DAT10 0x2
+#define ISC_RLP_CFG_MODE_DAT11 0x3
+#define ISC_RLP_CFG_MODE_DAT12 0x4
+#define ISC_RLP_CFG_MODE_DATY8 0x5
+#define ISC_RLP_CFG_MODE_DATY10 0x6
+#define ISC_RLP_CFG_MODE_ARGB444 0x7
+#define ISC_RLP_CFG_MODE_ARGB555 0x8
+#define ISC_RLP_CFG_MODE_RGB565 0x9
+#define ISC_RLP_CFG_MODE_ARGB32 0xa
+#define ISC_RLP_CFG_MODE_YYCC 0xb
+#define ISC_RLP_CFG_MODE_YYCC_LIMITED 0xc
+#define ISC_RLP_CFG_MODE_MASK GENMASK(3, 0)
+
+/* DMA Configuration Register */
+#define ISC_DCFG 0x000003e0
+#define ISC_DCFG_IMODE_PACKED8 0x0
+#define ISC_DCFG_IMODE_PACKED16 0x1
+#define ISC_DCFG_IMODE_PACKED32 0x2
+#define ISC_DCFG_IMODE_YC422SP 0x3
+#define ISC_DCFG_IMODE_YC422P 0x4
+#define ISC_DCFG_IMODE_YC420SP 0x5
+#define ISC_DCFG_IMODE_YC420P 0x6
+#define ISC_DCFG_IMODE_MASK GENMASK(2, 0)
+
+#define ISC_DCFG_YMBSIZE_SINGLE 0x0
+#define ISC_DCFG_YMBSIZE_BEATS4 (0x1 << 4)
+#define ISC_DCFG_YMBSIZE_BEATS8 (0x2 << 4)
+#define ISC_DCFG_YMBSIZE_BEATS16 (0x3 << 4)
+#define ISC_DCFG_YMBSIZE_MASK GENMASK(5, 4)
+
+#define ISC_DCFG_CMBSIZE_SINGLE 0x0
+#define ISC_DCFG_CMBSIZE_BEATS4 (0x1 << 8)
+#define ISC_DCFG_CMBSIZE_BEATS8 (0x2 << 8)
+#define ISC_DCFG_CMBSIZE_BEATS16 (0x3 << 8)
+#define ISC_DCFG_CMBSIZE_MASK GENMASK(9, 8)
+
+/* DMA Control Register */
+#define ISC_DCTRL 0x000003e4
+
+#define ISC_DCTRL_DE_EN BIT(0)
+#define ISC_DCTRL_DE_DIS 0x0
+#define ISC_DCTRL_DE_MASK BIT(0)
+
+#define ISC_DCTRL_DVIEW_PACKED 0x0
+#define ISC_DCTRL_DVIEW_SEMIPLANAR (0x1 << 1)
+#define ISC_DCTRL_DVIEW_PLANAR (0x2 << 1)
+#define ISC_DCTRL_DVIEW_MASK GENMASK(2, 1)
+
+#define ISC_DCTRL_IE_IS 0x0
+#define ISC_DCTRL_IE_NOT BIT(4)
+#define ISC_DCTRL_IE_MASK BIT(4)
+
+#define ISC_DCTRL_WB_EN BIT(5)
+#define ISC_DCTRL_WB_DIS 0x0
+#define ISC_DCTRL_WB_MASK BIT(5)
+
+#define ISC_DCTRL_DESC_IS_DONE BIT(7)
+#define ISC_DCTRL_DESC_NOT_DONE 0x0
+#define ISC_DCTRL_DESC_MASK BIT(7)
+
+/* DMA Descriptor Address Register */
+#define ISC_DNDA 0x000003e8
+
+/* DMA Address 0 Register */
+#define ISC_DAD0 0x000003ec
+
+/* DMA Stride 0 Register */
+#define ISC_DST0 0x000003f0
+
+#endif
diff --git a/drivers/media/platform/atmel/atmel-isc.c b/drivers/media/platform/atmel/atmel-isc.c
new file mode 100644
index 0000000..148b9e8
--- /dev/null
+++ b/drivers/media/platform/atmel/atmel-isc.c
@@ -0,0 +1,1610 @@
+/*
+ * Atmel Image Sensor Controller (ISC) driver
+ *
+ * Copyright (C) 2016 Atmel
+ *
+ * Author: Songjun Wu <songjun.wu@atmel.com>
+ *
+ * This program is free software; you may redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * Sensor-->PFE-->WB-->CFA-->CC-->GAM-->CSC-->CBC-->SUB-->RLP-->DMA
+ *
+ * ISC video pipeline integrates the following submodules:
+ * PFE: Parallel Front End to sample the camera sensor input stream
+ * WB: Programmable white balance in the Bayer domain
+ * CFA: Color filter array interpolation module
+ * CC: Programmable color correction
+ * GAM: Gamma correction
+ * CSC: Programmable color space conversion
+ * CBC: Contrast and Brightness control
+ * SUB: This module performs YCbCr444 to YCbCr420 chrominance subsampling
+ * RLP: This module performs rounding, range limiting
+ * and packing of the incoming data
+ */
+
+#include <linux/clk.h>
+#include <linux/clkdev.h>
+#include <linux/clk-provider.h>
+#include <linux/delay.h>
+#include <linux/interrupt.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/pm_runtime.h>
+#include <linux/regmap.h>
+#include <linux/videodev2.h>
+
+#include <media/v4l2-device.h>
+#include <media/v4l2-image-sizes.h>
+#include <media/v4l2-ioctl.h>
+#include <media/v4l2-of.h>
+#include <media/v4l2-subdev.h>
+#include <media/videobuf2-dma-contig.h>
+
+#include "atmel-isc-regs.h"
+
+#define ATMEL_ISC_NAME "atmel_isc"
+
+#define ISC_MAX_SUPPORT_WIDTH 2592
+#define ISC_MAX_SUPPORT_HEIGHT 1944
+
+#define ISC_CLK_MAX_DIV 255
+
+struct isc_clk_pdata {
+ u8 clk_id;
+ u8 max_num_parents;
+};
+
+struct isc_clk {
+ struct clk_hw hw;
+ struct clk *clk;
+ struct regmap *regmap;
+ spinlock_t *lock;
+ u8 id;
+ u8 parent_id;
+ u32 div;
+
+ struct isc_device *isc;
+};
+
+#define to_isc_clk(hw) container_of(hw, struct isc_clk, hw)
+
+struct isc_buffer {
+ struct vb2_v4l2_buffer vb;
+ struct list_head list;
+};
+
+struct isc_subdev_entity {
+ struct v4l2_subdev *sd;
+ struct v4l2_async_subdev *asd;
+ struct v4l2_async_notifier notifier;
+ struct v4l2_subdev_pad_config *config;
+
+ u32 pfe_cfg0;
+
+ struct list_head list;
+};
+
+/*
+ * struct isc_format - ISC media bus format information
+ * @fourcc: Fourcc code for this format
+ * @isc_mbus_code: V4L2 media bus format code if ISC is preferred
+ * @sd_mbus_code: V4L2 media bus format code if subdev is preferred
+ * @bpp: Bytes per pixel (when stored in memory)
+ * @reg_sd_bps: reg value for bits per sample if subdev is preferred
+ * (when transferred over a bus)
+ * @reg_isc_bps: reg value for bits per sample if ISC is preferred
+ * (when transferred over a bus)
+ * @pipeline: pipeline switch if ISC is preferred
+ * @isc_support: ISC can convert raw format to this format
+ * @sd_support: Subdev supports this format
+ */
+struct isc_format {
+ u32 fourcc;
+ u32 isc_mbus_code;
+ u32 sd_mbus_code;
+
+ u8 bpp;
+
+ u32 reg_sd_bps;
+ u32 reg_isc_bps;
+
+ u32 reg_wb_cfg;
+ u32 reg_cfa_cfg;
+ u32 reg_rlp_mode;
+ u32 reg_dcfg_imode;
+ u32 reg_dctrl_dview;
+
+ u32 pipeline;
+
+ bool isc_support;
+ bool sd_support;
+};
+
+struct isc_device {
+ struct regmap *regmap;
+ struct clk *hclock;
+ struct clk *ispck;
+ struct isc_clk isc_clks[2];
+ spinlock_t clk_lock;
+
+ struct device *dev;
+ struct v4l2_device v4l2_dev;
+ struct video_device video_dev;
+
+ struct vb2_queue vb2_vidq;
+ struct vb2_alloc_ctx *alloc_ctx;
+
+ spinlock_t dma_queue_lock;
+ struct list_head dma_queue;
+ struct isc_buffer *cur_frm;
+ unsigned int sequence;
+ bool stop;
+ struct completion comp;
+
+ struct v4l2_format fmt;
+
+ struct isc_format **user_formats;
+ unsigned int num_user_formats;
+ const struct isc_format *current_fmt;
+
+ struct mutex lock;
+
+ struct isc_subdev_entity *current_subdev;
+ struct list_head subdev_entities;
+};
+
+struct reg_mask {
+ u32 reg;
+ u32 mask;
+};
+
+static unsigned int sensor_preferred = 1;
+module_param(sensor_preferred, uint, S_IRUGO|S_IWUSR);
+MODULE_PARM_DESC(sensor_preferred,
+"Sensor is preferred to output the specified format (1-on 0-off) default 1");
+
+/* WB-->CFA-->CC-->GAM-->CSC-->CBC-->SUB422-->SUB420 */
+const struct reg_mask pipeline_regs[] = {
+ { ISC_WB_CTRL, ISC_WB_CTRL_MASK },
+ { ISC_CFA_CTRL, ISC_CFA_CTRL_MASK },
+ { ISC_CC_CTRL, ISC_CC_CTRL_MASK },
+ { ISC_GAM_CTRL, ISC_GAM_CTRL_MASK | ISC_GAM_CTRL_ALL_CHAN_MASK },
+ { ISC_CSC_CTRL, ISC_CSC_CTRL_MASK },
+ { ISC_CBC_CTRL, ISC_CBC_CTRL_MASK },
+ { ISC_SUB422_CTRL, ISC_SUB422_CTRL_MASK },
+ { ISC_SUB420_CTRL, ISC_SUB420_CTRL_MASK }
+};
+
+#define RAW_FMT_INDEX_START 0
+#define RAW_FMT_INDEX_END 11
+#define ISC_FMT_INDEX_START 12
+#define ISC_FMT_INDEX_END 12
+
+/*
+ * index(0~11): raw formats.
+ * index(12~12): the formats which can be converted from raw format by ISC.
+ * index(): the formats which can only be provided by subdev.
+ */
+static struct isc_format isc_formats[] = {
+{V4L2_PIX_FMT_SBGGR8, MEDIA_BUS_FMT_SBGGR8_1X8, MEDIA_BUS_FMT_SBGGR8_1X8,
+1, ISC_PFE_CFG0_BPS_EIGHT, ISC_PFE_CFG0_BPS_EIGHT, ISC_WB_CFG_BAYCFG_BGBG,
+ISC_CFA_CFG_BAY_BGBG, ISC_RLP_CFG_MODE_DAT8, ISC_DCFG_IMODE_PACKED8,
+ISC_DCTRL_DVIEW_PACKED, 0x0, false, false},
+{V4L2_PIX_FMT_SGBRG8, MEDIA_BUS_FMT_SGBRG8_1X8, MEDIA_BUS_FMT_SGBRG8_1X8,
+1, ISC_PFE_CFG0_BPS_EIGHT, ISC_PFE_CFG0_BPS_EIGHT, ISC_WB_CFG_BAYCFG_GBGB,
+ISC_CFA_CFG_BAY_GBGB, ISC_RLP_CFG_MODE_DAT8, ISC_DCFG_IMODE_PACKED8,
+ISC_DCTRL_DVIEW_PACKED, 0x0, false, false},
+{V4L2_PIX_FMT_SGRBG8, MEDIA_BUS_FMT_SGRBG8_1X8, MEDIA_BUS_FMT_SGRBG8_1X8,
+1, ISC_PFE_CFG0_BPS_EIGHT, ISC_PFE_CFG0_BPS_EIGHT, ISC_WB_CFG_BAYCFG_GRGR,
+ISC_CFA_CFG_BAY_GRGR, ISC_RLP_CFG_MODE_DAT8, ISC_DCFG_IMODE_PACKED8,
+ISC_DCTRL_DVIEW_PACKED, 0x0, false, false},
+{V4L2_PIX_FMT_SRGGB8, MEDIA_BUS_FMT_SRGGB8_1X8, MEDIA_BUS_FMT_SRGGB8_1X8,
+1, ISC_PFE_CFG0_BPS_EIGHT, ISC_PFE_CFG0_BPS_EIGHT, ISC_WB_CFG_BAYCFG_RGRG,
+ISC_CFA_CFG_BAY_RGRG, ISC_RLP_CFG_MODE_DAT8, ISC_DCFG_IMODE_PACKED8,
+ISC_DCTRL_DVIEW_PACKED, 0x0, false, false},
+
+{V4L2_PIX_FMT_SBGGR10, MEDIA_BUS_FMT_SBGGR10_1X10, MEDIA_BUS_FMT_SBGGR10_1X10,
+2, ISC_PFG_CFG0_BPS_TEN, ISC_PFG_CFG0_BPS_TEN, ISC_WB_CFG_BAYCFG_BGBG,
+ISC_CFA_CFG_BAY_BGBG, ISC_RLP_CFG_MODE_DAT10, ISC_DCFG_IMODE_PACKED16,
+ISC_DCTRL_DVIEW_PACKED, 0x0, false, false},
+{V4L2_PIX_FMT_SGBRG10, MEDIA_BUS_FMT_SGBRG10_1X10, MEDIA_BUS_FMT_SGBRG10_1X10,
+2, ISC_PFG_CFG0_BPS_TEN, ISC_PFG_CFG0_BPS_TEN, ISC_WB_CFG_BAYCFG_GBGB,
+ISC_CFA_CFG_BAY_GBGB, ISC_RLP_CFG_MODE_DAT10, ISC_DCFG_IMODE_PACKED16,
+ISC_DCTRL_DVIEW_PACKED, 0x0, false, false},
+{V4L2_PIX_FMT_SGRBG10, MEDIA_BUS_FMT_SGRBG10_1X10, MEDIA_BUS_FMT_SGRBG10_1X10,
+2, ISC_PFG_CFG0_BPS_TEN, ISC_PFG_CFG0_BPS_TEN, ISC_WB_CFG_BAYCFG_GRGR,
+ISC_CFA_CFG_BAY_GRGR, ISC_RLP_CFG_MODE_DAT10, ISC_DCFG_IMODE_PACKED16,
+ISC_DCTRL_DVIEW_PACKED, 0x0, false, false},
+{V4L2_PIX_FMT_SRGGB10, MEDIA_BUS_FMT_SRGGB10_1X10, MEDIA_BUS_FMT_SRGGB10_1X10,
+2, ISC_PFG_CFG0_BPS_TEN, ISC_PFG_CFG0_BPS_TEN, ISC_WB_CFG_BAYCFG_RGRG,
+ISC_CFA_CFG_BAY_RGRG, ISC_RLP_CFG_MODE_DAT10, ISC_DCFG_IMODE_PACKED16,
+ISC_DCTRL_DVIEW_PACKED, 0x0, false, false},
+
+{V4L2_PIX_FMT_SBGGR12, MEDIA_BUS_FMT_SBGGR12_1X12, MEDIA_BUS_FMT_SBGGR12_1X12,
+2, ISC_PFG_CFG0_BPS_TWELVE, ISC_PFG_CFG0_BPS_TWELVE, ISC_WB_CFG_BAYCFG_BGBG,
+ISC_CFA_CFG_BAY_BGBG, ISC_RLP_CFG_MODE_DAT12, ISC_DCFG_IMODE_PACKED16,
+ISC_DCTRL_DVIEW_PACKED, 0x0, false, false},
+{V4L2_PIX_FMT_SGBRG12, MEDIA_BUS_FMT_SGBRG12_1X12, MEDIA_BUS_FMT_SGBRG12_1X12,
+2, ISC_PFG_CFG0_BPS_TWELVE, ISC_PFG_CFG0_BPS_TWELVE, ISC_WB_CFG_BAYCFG_GBGB,
+ISC_CFA_CFG_BAY_GBGB, ISC_RLP_CFG_MODE_DAT12, ISC_DCFG_IMODE_PACKED16,
+ISC_DCTRL_DVIEW_PACKED, 0x0, false, false},
+{V4L2_PIX_FMT_SGRBG12, MEDIA_BUS_FMT_SGRBG12_1X12, MEDIA_BUS_FMT_SGRBG12_1X12,
+2, ISC_PFG_CFG0_BPS_TWELVE, ISC_PFG_CFG0_BPS_TWELVE, ISC_WB_CFG_BAYCFG_GRGR,
+ISC_CFA_CFG_BAY_GRGR, ISC_RLP_CFG_MODE_DAT12, ISC_DCFG_IMODE_PACKED16,
+ISC_DCTRL_DVIEW_PACKED, 0x0, false, false},
+{V4L2_PIX_FMT_SRGGB12, MEDIA_BUS_FMT_SRGGB12_1X12, MEDIA_BUS_FMT_SRGGB12_1X12,
+2, ISC_PFG_CFG0_BPS_TWELVE, ISC_PFG_CFG0_BPS_TWELVE, ISC_WB_CFG_BAYCFG_RGRG,
+ISC_CFA_CFG_BAY_RGRG, ISC_RLP_CFG_MODE_DAT12, ISC_DCFG_IMODE_PACKED16,
+ISC_DCTRL_DVIEW_PACKED, 0x0, false, false},
+
+{V4L2_PIX_FMT_YUYV, MEDIA_BUS_FMT_YUYV8_2X8, MEDIA_BUS_FMT_YUYV8_2X8,
+2, ISC_PFE_CFG0_BPS_EIGHT, ISC_PFE_CFG0_BPS_EIGHT, ISC_WB_CFG_BAYCFG_BGBG,
+ISC_CFA_CFG_BAY_BGBG, ISC_RLP_CFG_MODE_DAT8, ISC_DCFG_IMODE_PACKED8,
+ISC_DCTRL_DVIEW_PACKED, 0x7f, false, false},
+};
+
+static int isc_clk_enable(struct clk_hw *hw)
+{
+ struct isc_clk *isc_clk = to_isc_clk(hw);
+ u32 id = isc_clk->id;
+ struct regmap *regmap = isc_clk->regmap;
+ unsigned long flags;
+
+ dev_dbg(isc_clk->isc->dev, "ISC CLK: %s, div = %d, parent id = %d\n",
+ __func__, isc_clk->div, isc_clk->parent_id);
+
+ spin_lock_irqsave(isc_clk->lock, flags);
+
+ regmap_update_bits(regmap, ISC_CLKCFG,
+ ISC_CLKCFG_DIV_MASK(id) | ISC_CLKCFG_SEL_MASK(id),
+ (isc_clk->div << ISC_CLKCFG_DIV_SHIFT(id)) |
+ (isc_clk->parent_id << ISC_CLKCFG_SEL_SHIFT(id)));
+
+ regmap_update_bits(regmap, ISC_CLKEN,
+ ISC_CLKEN_EN_MASK(id),
+ ISC_CLKEN_EN << ISC_CLKEN_EN_SHIFT(id));
+
+ spin_unlock_irqrestore(isc_clk->lock, flags);
+
+ return 0;
+}
+
+static void isc_clk_disable(struct clk_hw *hw)
+{
+ struct isc_clk *isc_clk = to_isc_clk(hw);
+ u32 id = isc_clk->id;
+ unsigned long flags;
+
+ spin_lock_irqsave(isc_clk->lock, flags);
+
+ regmap_update_bits(isc_clk->regmap, ISC_CLKDIS,
+ ISC_CLKDIS_DIS_MASK(id),
+ ISC_CLKDIS_DIS << ISC_CLKDIS_DIS_SHIFT(id));
+
+ spin_unlock_irqrestore(isc_clk->lock, flags);
+}
+
+static int isc_clk_is_enabled(struct clk_hw *hw)
+{
+ struct isc_clk *isc_clk = to_isc_clk(hw);
+ unsigned long flags;
+ u32 status;
+
+ spin_lock_irqsave(isc_clk->lock, flags);
+ regmap_read(isc_clk->regmap, ISC_CLKSR, &status);
+ spin_unlock_irqrestore(isc_clk->lock, flags);
+
+ return status & ISC_CLKSR_CLK_MASK(isc_clk->id) ? 1 : 0;
+}
+
+static unsigned long
+isc_clk_recalc_rate(struct clk_hw *hw, unsigned long parent_rate)
+{
+ struct isc_clk *isc_clk = to_isc_clk(hw);
+
+ return DIV_ROUND_CLOSEST(parent_rate, isc_clk->div + 1);
+}
+
+static int isc_clk_determine_rate(struct clk_hw *hw,
+ struct clk_rate_request *req)
+{
+ struct isc_clk *isc_clk = to_isc_clk(hw);
+ long best_rate = -EINVAL;
+ int best_diff = -1;
+ unsigned int i, div;
+
+ for (i = 0; i < clk_hw_get_num_parents(hw); i++) {
+ struct clk_hw *parent;
+ unsigned long parent_rate;
+
+ parent = clk_hw_get_parent_by_index(hw, i);
+ if (!parent)
+ continue;
+
+ parent_rate = clk_hw_get_rate(parent);
+ if (!parent_rate)
+ continue;
+
+ for (div = 1; div < ISC_CLK_MAX_DIV + 2; div++) {
+ unsigned long rate;
+ int diff;
+
+ rate = DIV_ROUND_CLOSEST(parent_rate, div);
+ diff = abs(req->rate - rate);
+
+ if (best_diff < 0 || best_diff > diff) {
+ best_rate = rate;
+ best_diff = diff;
+ req->best_parent_rate = parent_rate;
+ req->best_parent_hw = parent;
+ }
+
+ if (!best_diff || rate < req->rate)
+ break;
+ }
+
+ if (!best_diff)
+ break;
+ }
+
+ dev_dbg(isc_clk->isc->dev,
+ "ISC CLK: %s, best_rate = %ld, parent clk: %s @ %ld\n",
+ __func__, best_rate,
+ __clk_get_name((req->best_parent_hw)->clk),
+ req->best_parent_rate);
+
+ if (best_rate < 0)
+ return best_rate;
+
+ req->rate = best_rate;
+
+ return 0;
+}
+
+static int isc_clk_set_parent(struct clk_hw *hw, u8 index)
+{
+ struct isc_clk *isc_clk = to_isc_clk(hw);
+
+ if (index >= clk_hw_get_num_parents(hw))
+ return -EINVAL;
+
+ isc_clk->parent_id = index;
+
+ return 0;
+}
+
+static u8 isc_clk_get_parent(struct clk_hw *hw)
+{
+ struct isc_clk *isc_clk = to_isc_clk(hw);
+
+ return isc_clk->parent_id;
+}
+
+static int isc_clk_set_rate(struct clk_hw *hw,
+ unsigned long rate,
+ unsigned long parent_rate)
+{
+ struct isc_clk *isc_clk = to_isc_clk(hw);
+ u32 div;
+
+ if (!rate)
+ return -EINVAL;
+
+ div = DIV_ROUND_CLOSEST(parent_rate, rate);
+ if ((div > (ISC_CLK_MAX_DIV + 1)) || !div)
+ return -EINVAL;
+
+ isc_clk->div = div - 1;
+
+ return 0;
+}
+
+static const struct clk_ops isc_clk_ops = {
+ .enable = isc_clk_enable,
+ .disable = isc_clk_disable,
+ .is_enabled = isc_clk_is_enabled,
+ .recalc_rate = isc_clk_recalc_rate,
+ .determine_rate = isc_clk_determine_rate,
+ .set_parent = isc_clk_set_parent,
+ .get_parent = isc_clk_get_parent,
+ .set_rate = isc_clk_set_rate,
+};
+
+static int isc_clk_register(struct isc_device *isc,
+ const struct isc_clk_pdata *pdata, struct device_node *np)
+{
+ struct regmap *regmap = isc->regmap;
+ struct isc_clk *isc_clk;
+ struct clk_init_data init;
+ const char *clk_name = np->name;
+ const char **parent_names;
+ int num_parents, ret = 0;
+ u8 id = pdata->clk_id;
+
+ num_parents = of_clk_get_parent_count(np);
+ if (num_parents < 1 || num_parents > pdata->max_num_parents)
+ return -EINVAL;
+
+ parent_names = kcalloc(num_parents, sizeof(char *), GFP_KERNEL);
+ if (!parent_names)
+ return -ENOMEM;
+
+ of_clk_parent_fill(np, parent_names, num_parents);
+
+ init.parent_names = parent_names;
+ init.num_parents = num_parents;
+ init.name = clk_name;
+ init.ops = &isc_clk_ops;
+ init.flags = CLK_SET_RATE_GATE | CLK_SET_PARENT_GATE;
+
+ isc_clk = &isc->isc_clks[id];
+ isc_clk->hw.init = &init;
+ isc_clk->regmap = regmap;
+ isc_clk->lock = &isc->clk_lock;
+ isc_clk->id = id;
+ isc_clk->isc = isc;
+
+ isc_clk->clk = clk_register(NULL, &isc_clk->hw);
+ if (!IS_ERR(isc_clk->clk))
+ of_clk_add_provider(np, of_clk_src_simple_get, isc_clk->clk);
+ else {
+ dev_err(isc->dev, "%s: clock register fail\n", clk_name);
+ ret = PTR_ERR(isc_clk->clk);
+ goto free_parent_names;
+ }
+
+free_parent_names:
+ kfree(parent_names);
+ return ret;
+}
+
+static const struct isc_clk_pdata isc_ispck_pdata = {
+ .clk_id = 0,
+ .max_num_parents = 2,
+};
+
+static const struct isc_clk_pdata isc_mck_pdata = {
+ .clk_id = 1,
+ .max_num_parents = 3,
+};
+
+static const struct of_device_id isc_clk_ids[] = {
+ { .compatible = "atmel,sama5d2-isc-ispck", .data = &isc_ispck_pdata, },
+ { .compatible = "atmel,sama5d2-isc-mck", .data = &isc_mck_pdata, },
+ { /*sentinel*/ }
+};
+
+static int isc_clk_init(struct isc_device *isc)
+{
+ struct device_node *np = isc->dev->of_node;
+ struct device_node *childnp;
+ const struct of_device_id *clk_id;
+ unsigned int i;
+ int ret;
+
+ for (i = 0; i < ARRAY_SIZE(isc->isc_clks); i++)
+ isc->isc_clks[i].clk = ERR_PTR(-EINVAL);
+
+ spin_lock_init(&isc->clk_lock);
+ for_each_child_of_node(np, childnp) {
+ clk_id = of_match_node(isc_clk_ids, childnp);
+ if (!clk_id)
+ continue;
+
+ ret = isc_clk_register(isc, clk_id->data, childnp);
+ if (ret)
+ return ret;
+ }
+
+ return 0;
+}
+
+static void isc_clk_cleanup(struct isc_device *isc)
+{
+ struct device_node *np = isc->dev->of_node;
+ struct device_node *childnp;
+ const struct of_device_id *clk_id;
+ unsigned int i;
+
+ for_each_child_of_node(np, childnp) {
+ clk_id = of_match_node(isc_clk_ids, childnp);
+ if (!clk_id)
+ continue;
+
+ of_clk_del_provider(childnp);
+ }
+
+ for (i = 0; i < ARRAY_SIZE(isc->isc_clks); i++) {
+ struct isc_clk *isc_clk = &isc->isc_clks[i];
+
+ if (!IS_ERR(isc_clk->clk))
+ clk_unregister(isc_clk->clk);
+ }
+}
+
+static int isc_queue_setup(struct vb2_queue *vq,
+ unsigned int *nbuffers, unsigned int *nplanes,
+ unsigned int sizes[], void *alloc_ctxs[])
+{
+ struct isc_device *isc = vb2_get_drv_priv(vq);
+ unsigned int size = isc->fmt.fmt.pix.sizeimage;
+
+ alloc_ctxs[0] = isc->alloc_ctx;
+
+ if (*nplanes)
+ return sizes[0] < size ? -EINVAL : 0;
+
+ *nplanes = 1;
+ sizes[0] = size;
+
+ return 0;
+}
+
+static int isc_buffer_prepare(struct vb2_buffer *vb)
+{
+ struct vb2_v4l2_buffer *vbuf = to_vb2_v4l2_buffer(vb);
+ struct isc_device *isc = vb2_get_drv_priv(vb->vb2_queue);
+ unsigned long size = isc->fmt.fmt.pix.sizeimage;
+
+ if (vb2_plane_size(vb, 0) < size) {
+ v4l2_err(&isc->v4l2_dev, "buffer too small (%lu < %lu)\n",
+ vb2_plane_size(vb, 0), size);
+ return -EINVAL;
+ }
+
+ vb2_set_plane_payload(vb, 0, size);
+
+ vbuf->field = isc->fmt.fmt.pix.field;
+
+ return 0;
+}
+
+static inline void isc_start_dma(struct regmap *regmap,
+ struct isc_buffer *frm, u32 dview)
+{
+ dma_addr_t addr;
+
+ addr = vb2_dma_contig_plane_dma_addr(&frm->vb.vb2_buf, 0);
+
+ regmap_write(regmap, ISC_DCTRL, dview | ISC_DCTRL_IE_IS);
+ regmap_write(regmap, ISC_DAD0, addr);
+ regmap_update_bits(regmap, ISC_CTRLEN,
+ ISC_CTRLEN_CAPTURE_MASK, ISC_CTRLEN_CAPTURE);
+}
+
+static inline bool sensor_is_preferred(const struct isc_format *isc_fmt)
+{
+ if ((sensor_preferred && isc_fmt->sd_support) ||
+ !isc_fmt->isc_support)
+ return true;
+ else
+ return false;
+}
+
+static void isc_set_pipeline(struct regmap *regmap, u32 pipeline)
+{
+ const struct reg_mask *reg = &pipeline_regs[0];
+ u32 val;
+ unsigned int i;
+
+ for (i = 0; i < ARRAY_SIZE(pipeline_regs); i++) {
+ if (pipeline & BIT(i))
+ val = reg->mask;
+ else
+ val = 0;
+
+ regmap_update_bits(regmap, reg->reg, reg->mask, val);
+
+ reg++;
+ }
+}
+
+static int isc_configure(struct isc_device *isc)
+{
+ struct regmap *regmap = isc->regmap;
+ const struct isc_format *current_fmt = isc->current_fmt;
+ struct isc_subdev_entity *subdev = isc->current_subdev;
+ u32 pipeline, val, mask;
+ int counter = 10;
+
+ if (sensor_is_preferred(current_fmt)) {
+ val = current_fmt->reg_sd_bps;
+ pipeline = 0x0;
+ } else {
+ val = current_fmt->reg_isc_bps;
+ pipeline = current_fmt->pipeline;
+
+ regmap_update_bits(regmap, ISC_WB_CFG, ISC_WB_CFG_BAYCFG_MASK,
+ current_fmt->reg_wb_cfg);
+ regmap_update_bits(regmap, ISC_CFA_CFG, ISC_CFA_CFG_BAY_MASK,
+ current_fmt->reg_cfa_cfg);
+ }
+
+ val |= subdev->pfe_cfg0 | ISC_PFE_CFG0_MODE_PROGRESSIVE;
+ mask = ISC_PFE_CFG0_BPS_MASK | ISC_PFE_CFG0_HPOL_MASK |
+ ISC_PFE_CFG0_VPOL_MASK | ISC_PFE_CFG0_PPOL_MASK |
+ ISC_PFE_CFG0_MODE_MASK;
+
+ regmap_update_bits(regmap, ISC_PFE_CFG0, mask, val);
+
+ regmap_update_bits(regmap, ISC_RLP_CFG, ISC_RLP_CFG_MODE_MASK,
+ current_fmt->reg_rlp_mode);
+
+ regmap_update_bits(regmap, ISC_DCFG, ISC_DCFG_IMODE_MASK,
+ current_fmt->reg_dcfg_imode);
+
+ isc_set_pipeline(regmap, pipeline);
+
+ /* Update profile */
+ regmap_update_bits(regmap, ISC_CTRLEN,
+ ISC_CTRLEN_UPPRO_MASK, ISC_CTRLEN_UPPRO);
+
+ regmap_read(regmap, ISC_CTRLSR, &val);
+ while ((val & ISC_CTRLSR_UPPRO) && counter--) {
+ usleep_range(1000, 2000);
+ regmap_read(regmap, ISC_CTRLSR, &val);
+ }
+
+ if (counter < 0)
+ return -ETIMEDOUT;
+
+ return 0;
+}
+
+static int isc_start_streaming(struct vb2_queue *vq, unsigned int count)
+{
+ struct isc_device *isc = vb2_get_drv_priv(vq);
+ struct regmap *regmap = isc->regmap;
+ struct isc_buffer *buf;
+ unsigned long flags;
+ int ret;
+ u32 val;
+
+ /* Enable stream on the sub device */
+ ret = v4l2_subdev_call(isc->current_subdev->sd, video, s_stream, 1);
+ if (ret && ret != -ENOIOCTLCMD) {
+ v4l2_err(&isc->v4l2_dev, "stream on failed in subdev\n");
+ goto err;
+ }
+
+ pm_runtime_get_sync(isc->dev);
+
+ /* Disable all the interrupts */
+ regmap_write(isc->regmap, ISC_INTDIS, (u32)~0UL);
+
+ /* Clean the interrupt status register */
+ regmap_read(regmap, ISC_INTSR, &val);
+
+ ret = isc_configure(isc);
+ if (unlikely(ret))
+ goto err;
+
+ /* Enable DMA interrupt */
+ regmap_update_bits(regmap, ISC_INTEN,
+ ISC_INTEN_DDONE_MASK, ISC_INTEN_DDONE);
+
+ spin_lock_irqsave(&isc->dma_queue_lock, flags);
+
+ isc->sequence = 0;
+ isc->stop = false;
+ reinit_completion(&isc->comp);
+
+ isc->cur_frm = list_first_entry(&isc->dma_queue,
+ struct isc_buffer, list);
+ list_del(&isc->cur_frm->list);
+
+ isc_start_dma(regmap, isc->cur_frm, isc->current_fmt->reg_dctrl_dview);
+
+ spin_unlock_irqrestore(&isc->dma_queue_lock, flags);
+
+ return 0;
+
+err:
+ pm_runtime_put_sync(isc->dev);
+
+ spin_lock_irqsave(&isc->dma_queue_lock, flags);
+ list_for_each_entry(buf, &isc->dma_queue, list)
+ vb2_buffer_done(&buf->vb.vb2_buf, VB2_BUF_STATE_QUEUED);
+ INIT_LIST_HEAD(&isc->dma_queue);
+ spin_unlock_irqrestore(&isc->dma_queue_lock, flags);
+
+ return ret;
+}
+
+static void isc_stop_streaming(struct vb2_queue *vq)
+{
+ struct isc_device *isc = vb2_get_drv_priv(vq);
+ unsigned long flags;
+ struct isc_buffer *buf;
+ int ret;
+
+ isc->stop = true;
+
+ /* Wait until the end of the current frame */
+ if (isc->cur_frm && !wait_for_completion_timeout(&isc->comp, 5 * HZ))
+ v4l2_err(&isc->v4l2_dev,
+ "Timeout waiting for end of the capture\n");
+
+ /* Disable DMA interrupt */
+ regmap_update_bits(isc->regmap, ISC_INTDIS,
+ ISC_INTDIS_DDONE_MASK, ISC_INTDIS_DDONE);
+
+ pm_runtime_put_sync(isc->dev);
+
+ /* Disable stream on the sub device */
+ ret = v4l2_subdev_call(isc->current_subdev->sd, video, s_stream, 0);
+ if (ret && ret != -ENOIOCTLCMD)
+ v4l2_err(&isc->v4l2_dev, "stream off failed in subdev\n");
+
+ /* Release all active buffers */
+ spin_lock_irqsave(&isc->dma_queue_lock, flags);
+ if (unlikely(isc->cur_frm)) {
+ vb2_buffer_done(&isc->cur_frm->vb.vb2_buf,
+ VB2_BUF_STATE_ERROR);
+ isc->cur_frm = NULL;
+ }
+ list_for_each_entry(buf, &isc->dma_queue, list)
+ vb2_buffer_done(&buf->vb.vb2_buf, VB2_BUF_STATE_ERROR);
+ INIT_LIST_HEAD(&isc->dma_queue);
+ spin_unlock_irqrestore(&isc->dma_queue_lock, flags);
+}
+
+static void isc_buffer_queue(struct vb2_buffer *vb)
+{
+ struct vb2_v4l2_buffer *vbuf = to_vb2_v4l2_buffer(vb);
+ struct isc_buffer *buf = container_of(vbuf, struct isc_buffer, vb);
+ struct isc_device *isc = vb2_get_drv_priv(vb->vb2_queue);
+ unsigned long flags;
+
+ spin_lock_irqsave(&isc->dma_queue_lock, flags);
+ list_add_tail(&buf->list, &isc->dma_queue);
+ spin_unlock_irqrestore(&isc->dma_queue_lock, flags);
+}
+
+static struct vb2_ops isc_vb2_ops = {
+ .queue_setup = isc_queue_setup,
+ .wait_prepare = vb2_ops_wait_prepare,
+ .wait_finish = vb2_ops_wait_finish,
+ .buf_prepare = isc_buffer_prepare,
+ .start_streaming = isc_start_streaming,
+ .stop_streaming = isc_stop_streaming,
+ .buf_queue = isc_buffer_queue,
+};
+
+static int isc_querycap(struct file *file, void *priv,
+ struct v4l2_capability *cap)
+{
+ struct isc_device *isc = video_drvdata(file);
+
+ strcpy(cap->driver, ATMEL_ISC_NAME);
+ strcpy(cap->card, "Atmel Image Sensor Controller");
+ snprintf(cap->bus_info, sizeof(cap->bus_info),
+ "platform:%s", isc->v4l2_dev.name);
+
+ cap->device_caps = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_STREAMING;
+ cap->capabilities = cap->device_caps | V4L2_CAP_DEVICE_CAPS;
+
+ return 0;
+}
+
+static int isc_enum_fmt_vid_cap(struct file *file, void *priv,
+ struct v4l2_fmtdesc *f)
+{
+ struct isc_device *isc = video_drvdata(file);
+ u32 index = f->index;
+
+ if (index >= isc->num_user_formats)
+ return -EINVAL;
+
+ f->pixelformat = isc->user_formats[index]->fourcc;
+
+ return 0;
+}
+
+static int isc_g_fmt_vid_cap(struct file *file, void *priv,
+ struct v4l2_format *fmt)
+{
+ struct isc_device *isc = video_drvdata(file);
+
+ *fmt = isc->fmt;
+
+ return 0;
+}
+
+static struct isc_format *find_format_by_fourcc(struct isc_device *isc,
+ unsigned int fourcc)
+{
+ unsigned int num_formats = isc->num_user_formats;
+ struct isc_format *fmt;
+ unsigned int i;
+
+ for (i = 0; i < num_formats; i++) {
+ fmt = isc->user_formats[i];
+ if (fmt->fourcc == fourcc)
+ return fmt;
+ }
+
+ return NULL;
+}
+
+static int isc_try_fmt(struct isc_device *isc, struct v4l2_format *f,
+ struct isc_format **current_fmt, u32 *code)
+{
+ struct isc_format *isc_fmt;
+ struct v4l2_pix_format *pixfmt = &f->fmt.pix;
+ struct v4l2_subdev_format format = {
+ .which = V4L2_SUBDEV_FORMAT_TRY,
+ };
+ u32 mbus_code;
+ int ret;
+
+ if (f->type != V4L2_BUF_TYPE_VIDEO_CAPTURE)
+ return -EINVAL;
+
+ isc_fmt = find_format_by_fourcc(isc, pixfmt->pixelformat);
+ if (!isc_fmt) {
+ v4l2_warn(&isc->v4l2_dev, "Format 0x%x not found\n",
+ pixfmt->pixelformat);
+ return -EINVAL;
+ }
+
+ /* Limit to Atmel ISC hardware capabilities */
+ if (pixfmt->width > ISC_MAX_SUPPORT_WIDTH)
+ pixfmt->width = ISC_MAX_SUPPORT_WIDTH;
+ if (pixfmt->height > ISC_MAX_SUPPORT_HEIGHT)
+ pixfmt->height = ISC_MAX_SUPPORT_HEIGHT;
+
+ if (sensor_is_preferred(isc_fmt))
+ mbus_code = isc_fmt->sd_mbus_code;
+ else
+ mbus_code = isc_fmt->isc_mbus_code;
+
+ v4l2_fill_mbus_format(&format.format, pixfmt, mbus_code);
+ ret = v4l2_subdev_call(isc->current_subdev->sd, pad, set_fmt,
+ isc->current_subdev->config, &format);
+ if (ret < 0)
+ return ret;
+
+ v4l2_fill_pix_format(pixfmt, &format.format);
+
+ switch (pixfmt->field) {
+ case V4L2_FIELD_ANY:
+ case V4L2_FIELD_NONE:
+ break;
+ default:
+ v4l2_err(&isc->v4l2_dev, "Field type %d unsupported.\n",
+ pixfmt->field);
+ return -EINVAL;
+ }
+
+ pixfmt->bytesperline = pixfmt->width * isc_fmt->bpp;
+ pixfmt->sizeimage = pixfmt->bytesperline * pixfmt->height;
+
+ if (current_fmt)
+ *current_fmt = isc_fmt;
+
+ if (code)
+ *code = mbus_code;
+
+ return 0;
+}
+
+static int isc_set_fmt(struct isc_device *isc, struct v4l2_format *f)
+{
+ struct v4l2_subdev_format format = {
+ .which = V4L2_SUBDEV_FORMAT_ACTIVE,
+ };
+ struct isc_format *current_fmt;
+ int ret;
+ u32 mbus_code;
+
+ ret = isc_try_fmt(isc, f, ¤t_fmt, &mbus_code);
+ if (ret)
+ return ret;
+
+ v4l2_fill_mbus_format(&format.format, &f->fmt.pix, mbus_code);
+ ret = v4l2_subdev_call(isc->current_subdev->sd, pad,
+ set_fmt, NULL, &format);
+ if (ret < 0)
+ return ret;
+
+ isc->fmt = *f;
+ isc->current_fmt = current_fmt;
+
+ return 0;
+}
+
+static int isc_s_fmt_vid_cap(struct file *file, void *priv,
+ struct v4l2_format *f)
+{
+ struct isc_device *isc = video_drvdata(file);
+
+ if (vb2_is_streaming(&isc->vb2_vidq))
+ return -EBUSY;
+
+ return isc_set_fmt(isc, f);
+}
+
+static int isc_try_fmt_vid_cap(struct file *file, void *priv,
+ struct v4l2_format *f)
+{
+ struct isc_device *isc = video_drvdata(file);
+
+ return isc_try_fmt(isc, f, NULL, NULL);
+}
+
+static int isc_enum_input(struct file *file, void *priv,
+ struct v4l2_input *inp)
+{
+ if (inp->index != 0)
+ return -EINVAL;
+
+ inp->type = V4L2_INPUT_TYPE_CAMERA;
+ inp->std = 0;
+ strcpy(inp->name, "Camera");
+
+ return 0;
+}
+
+static int isc_g_input(struct file *file, void *priv, unsigned int *i)
+{
+ *i = 0;
+
+ return 0;
+}
+
+static int isc_s_input(struct file *file, void *priv, unsigned int i)
+{
+ if (i > 0)
+ return -EINVAL;
+
+ return 0;
+}
+
+static int isc_g_parm(struct file *file, void *fh, struct v4l2_streamparm *a)
+{
+ struct isc_device *isc = video_drvdata(file);
+ int ret;
+
+ if (a->type != V4L2_BUF_TYPE_VIDEO_CAPTURE)
+ return -EINVAL;
+
+ ret = v4l2_subdev_call(isc->current_subdev->sd, video, g_parm, a);
+ if (ret == -ENOIOCTLCMD)
+ ret = 0;
+
+ return ret;
+}
+
+static int isc_s_parm(struct file *file, void *fh, struct v4l2_streamparm *a)
+{
+ struct isc_device *isc = video_drvdata(file);
+ int ret;
+
+ if (a->type != V4L2_BUF_TYPE_VIDEO_CAPTURE)
+ return -EINVAL;
+
+ ret = v4l2_subdev_call(isc->current_subdev->sd, video, s_parm, a);
+ if (ret == -ENOIOCTLCMD)
+ ret = 0;
+
+ return ret;
+}
+
+static const struct v4l2_ioctl_ops isc_ioctl_ops = {
+ .vidioc_querycap = isc_querycap,
+ .vidioc_enum_fmt_vid_cap = isc_enum_fmt_vid_cap,
+ .vidioc_g_fmt_vid_cap = isc_g_fmt_vid_cap,
+ .vidioc_s_fmt_vid_cap = isc_s_fmt_vid_cap,
+ .vidioc_try_fmt_vid_cap = isc_try_fmt_vid_cap,
+
+ .vidioc_enum_input = isc_enum_input,
+ .vidioc_g_input = isc_g_input,
+ .vidioc_s_input = isc_s_input,
+
+ .vidioc_reqbufs = vb2_ioctl_reqbufs,
+ .vidioc_querybuf = vb2_ioctl_querybuf,
+ .vidioc_qbuf = vb2_ioctl_qbuf,
+ .vidioc_expbuf = vb2_ioctl_expbuf,
+ .vidioc_dqbuf = vb2_ioctl_dqbuf,
+ .vidioc_create_bufs = vb2_ioctl_create_bufs,
+ .vidioc_prepare_buf = vb2_ioctl_prepare_buf,
+ .vidioc_streamon = vb2_ioctl_streamon,
+ .vidioc_streamoff = vb2_ioctl_streamoff,
+
+ .vidioc_g_parm = isc_g_parm,
+ .vidioc_s_parm = isc_s_parm,
+};
+
+static int isc_set_default_fmt(struct isc_device *isc)
+{
+ u32 index = isc->num_user_formats - 1;
+ struct v4l2_format f = {
+ .type = V4L2_BUF_TYPE_VIDEO_CAPTURE,
+ .fmt.pix = {
+ .width = VGA_WIDTH,
+ .height = VGA_HEIGHT,
+ .field = V4L2_FIELD_ANY,
+ .pixelformat = isc->user_formats[index]->fourcc,
+ },
+ };
+
+ return isc_set_fmt(isc, &f);
+}
+
+static int isc_open(struct file *file)
+{
+ struct isc_device *isc = video_drvdata(file);
+ struct v4l2_subdev *sd = isc->current_subdev->sd;
+ int ret;
+
+ if (mutex_lock_interruptible(&isc->lock))
+ return -ERESTARTSYS;
+
+ ret = v4l2_fh_open(file);
+ if (ret < 0)
+ goto unlock;
+
+ ret = v4l2_subdev_call(sd, core, s_power, 1);
+ if (ret < 0 && ret != -ENOIOCTLCMD)
+ goto unlock;
+
+ ret = isc_set_default_fmt(isc);
+ if (ret)
+ goto unlock;
+
+unlock:
+ mutex_unlock(&isc->lock);
+ return ret;
+}
+
+static int isc_release(struct file *file)
+{
+ struct isc_device *isc = video_drvdata(file);
+ struct v4l2_subdev *sd = isc->current_subdev->sd;
+ int ret;
+
+ mutex_lock(&isc->lock);
+
+ ret = _vb2_fop_release(file, NULL);
+
+ v4l2_subdev_call(sd, core, s_power, 0);
+
+ mutex_unlock(&isc->lock);
+
+ return ret;
+}
+
+static const struct v4l2_file_operations isc_fops = {
+ .owner = THIS_MODULE,
+ .open = isc_open,
+ .release = isc_release,
+ .unlocked_ioctl = video_ioctl2,
+ .read = vb2_fop_read,
+ .mmap = vb2_fop_mmap,
+ .poll = vb2_fop_poll,
+};
+
+static irqreturn_t isc_interrupt(int irq, void *dev_id)
+{
+ struct isc_device *isc = (struct isc_device *)dev_id;
+ struct regmap *regmap = isc->regmap;
+ u32 isc_intsr, isc_intmask, pending;
+ irqreturn_t ret = IRQ_NONE;
+
+ spin_lock(&isc->dma_queue_lock);
+
+ regmap_read(regmap, ISC_INTSR, &isc_intsr);
+ regmap_read(regmap, ISC_INTMASK, &isc_intmask);
+
+ pending = isc_intsr & isc_intmask;
+
+ if (likely(pending & ISC_INTSR_DDONE)) {
+ if (isc->cur_frm) {
+ struct vb2_v4l2_buffer *vbuf = &isc->cur_frm->vb;
+ struct vb2_buffer *vb = &vbuf->vb2_buf;
+
+ vb->timestamp = ktime_get_ns();
+ vbuf->sequence = isc->sequence++;
+ vb2_buffer_done(vb, VB2_BUF_STATE_DONE);
+ isc->cur_frm = NULL;
+ }
+
+ if (!list_empty(&isc->dma_queue) && !isc->stop) {
+ isc->cur_frm = list_first_entry(&isc->dma_queue,
+ struct isc_buffer, list);
+ list_del(&isc->cur_frm->list);
+
+ isc_start_dma(regmap, isc->cur_frm,
+ isc->current_fmt->reg_dctrl_dview);
+ }
+
+ if (isc->stop)
+ complete(&isc->comp);
+
+ ret = IRQ_HANDLED;
+ }
+
+ spin_unlock(&isc->dma_queue_lock);
+
+ return ret;
+}
+
+static int isc_async_bound(struct v4l2_async_notifier *notifier,
+ struct v4l2_subdev *subdev,
+ struct v4l2_async_subdev *asd)
+{
+ struct isc_device *isc = container_of(notifier->v4l2_dev,
+ struct isc_device, v4l2_dev);
+ struct isc_subdev_entity *subdev_entity =
+ container_of(notifier, struct isc_subdev_entity, notifier);
+
+ if (video_is_registered(&isc->video_dev)) {
+ v4l2_err(&isc->v4l2_dev, "only supports one sub-device.\n");
+ return -EBUSY;
+ }
+
+ subdev_entity->sd = subdev;
+
+ return 0;
+}
+
+static void isc_async_unbind(struct v4l2_async_notifier *notifier,
+ struct v4l2_subdev *subdev,
+ struct v4l2_async_subdev *asd)
+{
+ struct isc_device *isc = container_of(notifier->v4l2_dev,
+ struct isc_device, v4l2_dev);
+
+ video_unregister_device(&isc->video_dev);
+ vb2_dma_contig_cleanup_ctx(isc->alloc_ctx);
+ isc->alloc_ctx = NULL;
+ if (isc->current_subdev->config)
+ v4l2_subdev_free_pad_config(isc->current_subdev->config);
+}
+
+static struct isc_format *find_format_by_code(unsigned int code, int *index)
+{
+ struct isc_format *fmt = &isc_formats[0];
+ unsigned int i;
+
+ for (i = 0; i < ARRAY_SIZE(isc_formats); i++) {
+ if (fmt->sd_mbus_code == code) {
+ *index = i;
+ return fmt;
+ }
+
+ fmt++;
+ }
+
+ return NULL;
+}
+
+static int isc_formats_init(struct isc_device *isc)
+{
+ struct isc_format *fmt;
+ struct v4l2_subdev *subdev = isc->current_subdev->sd;
+ int num_fmts, i, j;
+ struct v4l2_subdev_mbus_code_enum mbus_code = {
+ .which = V4L2_SUBDEV_FORMAT_ACTIVE,
+ };
+
+ fmt = &isc_formats[0];
+ for (i = 0; i < ARRAY_SIZE(isc_formats); i++) {
+ fmt->isc_support = false;
+ fmt->sd_support = false;
+
+ fmt++;
+ }
+
+ while (!v4l2_subdev_call(subdev, pad, enum_mbus_code,
+ NULL, &mbus_code)) {
+ mbus_code.index++;
+ fmt = find_format_by_code(mbus_code.code, &i);
+ if (!fmt)
+ continue;
+
+ fmt->sd_support = true;
+
+ if (i <= RAW_FMT_INDEX_END) {
+ for (j = ISC_FMT_INDEX_START;
+ j <= ISC_FMT_INDEX_END; j++) {
+ isc_formats[j].isc_support = true;
+ isc_formats[j].isc_mbus_code = mbus_code.code;
+ isc_formats[j].reg_isc_bps = fmt->reg_sd_bps;
+ isc_formats[j].reg_wb_cfg = fmt->reg_wb_cfg;
+ isc_formats[j].reg_cfa_cfg = fmt->reg_cfa_cfg;
+ }
+ }
+ }
+
+ fmt = &isc_formats[0];
+ for (i = 0, num_fmts = 0; i < ARRAY_SIZE(isc_formats); i++) {
+ if (fmt->isc_support || fmt->sd_support)
+ num_fmts++;
+
+ fmt++;
+ }
+
+ if (!num_fmts)
+ return -ENXIO;
+
+ isc->num_user_formats = num_fmts;
+ isc->user_formats = devm_kcalloc(isc->dev,
+ num_fmts, sizeof(struct isc_format *),
+ GFP_KERNEL);
+ if (!isc->user_formats) {
+ v4l2_err(&isc->v4l2_dev, "could not allocate memory\n");
+ return -ENOMEM;
+ }
+
+ fmt = &isc_formats[0];
+ for (i = 0, j = 0; i < ARRAY_SIZE(isc_formats); i++) {
+ if (fmt->isc_support || fmt->sd_support)
+ isc->user_formats[j++] = fmt;
+
+ fmt++;
+ }
+
+ return 0;
+}
+
+static int isc_async_complete(struct v4l2_async_notifier *notifier)
+{
+ struct isc_device *isc = container_of(notifier->v4l2_dev,
+ struct isc_device, v4l2_dev);
+ struct isc_subdev_entity *sd_entity;
+ struct video_device *vdev = &isc->video_dev;
+ struct vb2_queue *q = &isc->vb2_vidq;
+ int ret;
+
+ isc->current_subdev = container_of(notifier,
+ struct isc_subdev_entity, notifier);
+ sd_entity = isc->current_subdev;
+
+ mutex_init(&isc->lock);
+ init_completion(&isc->comp);
+
+ /* Initialize videobuf2 queue */
+ isc->alloc_ctx = vb2_dma_contig_init_ctx(isc->dev);
+ if (IS_ERR(isc->alloc_ctx)) {
+ ret = PTR_ERR(isc->alloc_ctx);
+ v4l2_err(&isc->v4l2_dev,
+ "Failed to get the context: %d\n", ret);
+ return ret;
+ }
+
+ q->type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
+ q->io_modes = VB2_MMAP;
+ q->drv_priv = isc;
+ q->buf_struct_size = sizeof(struct isc_buffer);
+ q->ops = &isc_vb2_ops;
+ q->mem_ops = &vb2_dma_contig_memops;
+ q->timestamp_flags = V4L2_BUF_FLAG_TIMESTAMP_MONOTONIC;
+ q->lock = &isc->lock;
+ q->min_buffers_needed = 1;
+
+ ret = vb2_queue_init(q);
+ if (ret < 0) {
+ v4l2_err(&isc->v4l2_dev,
+ "vb2_queue_init() failed: %d\n", ret);
+ return ret;
+ }
+
+ /* Init video dma queues */
+ INIT_LIST_HEAD(&isc->dma_queue);
+ spin_lock_init(&isc->dma_queue_lock);
+
+ /* Register video device */
+ strlcpy(vdev->name, ATMEL_ISC_NAME, sizeof(vdev->name));
+ vdev->release = video_device_release_empty;
+ vdev->fops = &isc_fops;
+ vdev->ioctl_ops = &isc_ioctl_ops;
+ vdev->v4l2_dev = &isc->v4l2_dev;
+ vdev->vfl_dir = VFL_DIR_RX;
+ vdev->queue = q;
+ vdev->lock = &isc->lock;
+ vdev->ctrl_handler = isc->current_subdev->sd->ctrl_handler;
+ video_set_drvdata(vdev, isc);
+
+ ret = video_register_device(vdev, VFL_TYPE_GRABBER, -1);
+ if (ret < 0) {
+ v4l2_err(&isc->v4l2_dev,
+ "video_register_device failed: %d\n", ret);
+ return ret;
+ }
+
+ sd_entity->config = v4l2_subdev_alloc_pad_config(sd_entity->sd);
+ if (sd_entity->config == NULL)
+ return -ENOMEM;
+
+ ret = isc_formats_init(isc);
+ if (ret < 0) {
+ v4l2_err(&isc->v4l2_dev,
+ "Init format failed: %d\n", ret);
+ return ret;
+ }
+
+ return 0;
+}
+
+static void isc_subdev_cleanup(struct isc_device *isc)
+{
+ struct isc_subdev_entity *subdev_entity;
+
+ list_for_each_entry(subdev_entity, &isc->subdev_entities, list)
+ v4l2_async_notifier_unregister(&subdev_entity->notifier);
+
+ INIT_LIST_HEAD(&isc->subdev_entities);
+}
+
+static int isc_parse_dt(struct device *dev, struct isc_device *isc)
+{
+ struct device_node *np = dev->of_node;
+ struct device_node *epn = NULL, *rem;
+ struct v4l2_of_endpoint v4l2_epn;
+ struct isc_subdev_entity *subdev_entity;
+ unsigned int flags;
+ int ret;
+
+ INIT_LIST_HEAD(&isc->subdev_entities);
+
+ for (; ;) {
+ epn = of_graph_get_next_endpoint(np, epn);
+ if (!epn)
+ break;
+
+ rem = of_graph_get_remote_port_parent(epn);
+ if (!rem) {
+ dev_notice(dev, "Remote device at %s not found\n",
+ of_node_full_name(epn));
+ continue;
+ }
+
+ ret = v4l2_of_parse_endpoint(epn, &v4l2_epn);
+ if (ret) {
+ of_node_put(rem);
+ ret = -EINVAL;
+ dev_err(dev, "Could not parse the endpoint\n");
+ break;
+ }
+
+ subdev_entity = devm_kzalloc(dev,
+ sizeof(*subdev_entity), GFP_KERNEL);
+ if (subdev_entity == NULL) {
+ of_node_put(rem);
+ ret = -ENOMEM;
+ break;
+ }
+
+ subdev_entity->asd = devm_kzalloc(dev,
+ sizeof(*subdev_entity->asd), GFP_KERNEL);
+ if (subdev_entity->asd == NULL) {
+ of_node_put(rem);
+ ret = -ENOMEM;
+ break;
+ }
+
+ flags = v4l2_epn.bus.parallel.flags;
+
+ if (flags & V4L2_MBUS_HSYNC_ACTIVE_LOW)
+ subdev_entity->pfe_cfg0 = ISC_PFE_CFG0_HPOL_LOW;
+ else
+ subdev_entity->pfe_cfg0 = ISC_PFE_CFG0_HPOL_HIGH;
+
+ if (flags & V4L2_MBUS_VSYNC_ACTIVE_LOW)
+ subdev_entity->pfe_cfg0 |= ISC_PFE_CFG0_VPOL_LOW;
+ else
+ subdev_entity->pfe_cfg0 |= ISC_PFE_CFG0_VPOL_HIGH;
+
+ if (flags & V4L2_MBUS_PCLK_SAMPLE_FALLING)
+ subdev_entity->pfe_cfg0 |= ISC_PFE_CFG0_PPOL_LOW;
+ else
+ subdev_entity->pfe_cfg0 |= ISC_PFE_CFG0_PPOL_HIGH;
+
+ subdev_entity->asd->match_type = V4L2_ASYNC_MATCH_OF;
+ subdev_entity->asd->match.of.node = rem;
+ list_add_tail(&subdev_entity->list, &isc->subdev_entities);
+ }
+
+ of_node_put(epn);
+ return ret;
+}
+
+/* regmap configuration */
+#define ATMEL_ISC_REG_MAX 0xbfc
+static const struct regmap_config isc_regmap_config = {
+ .reg_bits = 32,
+ .reg_stride = 4,
+ .val_bits = 32,
+ .max_register = ATMEL_ISC_REG_MAX,
+};
+
+static int atmel_isc_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct isc_device *isc;
+ struct resource *res;
+ void __iomem *io_base;
+ struct isc_subdev_entity *subdev_entity;
+ int irq;
+ int ret;
+
+ isc = devm_kzalloc(dev, sizeof(*isc), GFP_KERNEL);
+ if (!isc)
+ return -ENOMEM;
+
+ platform_set_drvdata(pdev, isc);
+ isc->dev = dev;
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ io_base = devm_ioremap_resource(dev, res);
+ if (IS_ERR(io_base))
+ return PTR_ERR(io_base);
+
+ isc->regmap = devm_regmap_init_mmio(dev, io_base, &isc_regmap_config);
+ if (IS_ERR(isc->regmap)) {
+ ret = PTR_ERR(isc->regmap);
+ dev_err(dev, "failed to init register map: %d\n", ret);
+ return ret;
+ }
+
+ irq = platform_get_irq(pdev, 0);
+ if (IS_ERR_VALUE(irq)) {
+ ret = irq;
+ dev_err(dev, "failed to get irq: %d\n", ret);
+ return ret;
+ }
+
+ ret = devm_request_irq(dev, irq, isc_interrupt, 0,
+ ATMEL_ISC_NAME, isc);
+ if (ret < 0) {
+ dev_err(dev, "can't register ISR for IRQ %u (ret=%i)\n",
+ irq, ret);
+ return ret;
+ }
+
+ isc->hclock = devm_clk_get(dev, "hclock");
+ if (IS_ERR(isc->hclock)) {
+ ret = PTR_ERR(isc->hclock);
+ dev_err(dev, "failed to get hclock: %d\n", ret);
+ return ret;
+ }
+
+ ret = isc_clk_init(isc);
+ if (ret) {
+ dev_err(dev, "failed to init isc clock: %d\n", ret);
+ goto clean_isc_clk;
+ }
+
+ isc->ispck = devm_clk_get(dev, "ispck");
+ if (IS_ERR(isc->ispck)) {
+ ret = PTR_ERR(isc->ispck);
+ dev_err(dev, "failed to get isc_ispck: %d\n", ret);
+ goto clean_isc_clk;
+ }
+
+ /* ispck should be greater or equal to hclock */
+ ret = clk_set_rate(isc->ispck, clk_get_rate(isc->hclock));
+ if (ret) {
+ dev_err(dev, "failed to set ispck rate: %d\n", ret);
+ goto clean_isc_clk;
+ }
+
+ ret = v4l2_device_register(dev, &isc->v4l2_dev);
+ if (ret) {
+ dev_err(dev, "unable to register v4l2 device.\n");
+ goto clean_isc_clk;
+ }
+
+ ret = isc_parse_dt(dev, isc);
+ if (ret) {
+ dev_err(dev, "fail to parse device tree\n");
+ goto unregister_v4l2_device;
+ }
+
+ if (list_empty(&isc->subdev_entities)) {
+ dev_err(dev, "no subdev found\n");
+ goto unregister_v4l2_device;
+ }
+
+ list_for_each_entry(subdev_entity, &isc->subdev_entities, list) {
+ subdev_entity->notifier.subdevs = &subdev_entity->asd;
+ subdev_entity->notifier.num_subdevs = 1;
+ subdev_entity->notifier.bound = isc_async_bound;
+ subdev_entity->notifier.unbind = isc_async_unbind;
+ subdev_entity->notifier.complete = isc_async_complete;
+
+ ret = v4l2_async_notifier_register(&isc->v4l2_dev,
+ &subdev_entity->notifier);
+ if (ret) {
+ dev_err(dev, "fail to register async notifier\n");
+ goto cleanup_subdev;
+ }
+
+ if (video_is_registered(&isc->video_dev))
+ break;
+ }
+
+ pm_runtime_enable(dev);
+
+ return 0;
+
+cleanup_subdev:
+ isc_subdev_cleanup(isc);
+
+unregister_v4l2_device:
+ v4l2_device_unregister(&isc->v4l2_dev);
+
+clean_isc_clk:
+ isc_clk_cleanup(isc);
+
+ return ret;
+}
+
+static int atmel_isc_remove(struct platform_device *pdev)
+{
+ struct isc_device *isc = platform_get_drvdata(pdev);
+
+ pm_runtime_disable(&pdev->dev);
+
+ isc_subdev_cleanup(isc);
+
+ v4l2_device_unregister(&isc->v4l2_dev);
+
+ isc_clk_cleanup(isc);
+
+ return 0;
+}
+
+static int isc_runtime_suspend(struct device *dev)
+{
+ struct isc_device *isc = dev_get_drvdata(dev);
+
+ clk_disable_unprepare(isc->ispck);
+ clk_disable_unprepare(isc->hclock);
+
+ return 0;
+}
+
+static int isc_runtime_resume(struct device *dev)
+{
+ struct isc_device *isc = dev_get_drvdata(dev);
+ int ret;
+
+ ret = clk_prepare_enable(isc->hclock);
+ if (ret)
+ return ret;
+
+ return clk_prepare_enable(isc->ispck);
+}
+
+static const struct dev_pm_ops atmel_isc_dev_pm_ops = {
+ SET_RUNTIME_PM_OPS(isc_runtime_suspend, isc_runtime_resume, NULL)
+};
+
+static const struct of_device_id atmel_isc_of_match[] = {
+ { .compatible = "atmel,sama5d2-isc" },
+ { }
+};
+MODULE_DEVICE_TABLE(of, atmel_isc_of_match);
+
+static struct platform_driver atmel_isc_driver = {
+ .probe = atmel_isc_probe,
+ .remove = atmel_isc_remove,
+ .driver = {
+ .name = ATMEL_ISC_NAME,
+ .pm = &atmel_isc_dev_pm_ops,
+ .of_match_table = of_match_ptr(atmel_isc_of_match),
+ },
+};
+
+module_platform_driver(atmel_isc_driver);
+
+MODULE_AUTHOR("Songjun Wu <songjun.wu@atmel.com>");
+MODULE_DESCRIPTION("The V4L2 driver for Atmel-ISC");
+MODULE_LICENSE("GPL v2");
+MODULE_SUPPORTED_DEVICE("video");
--
2.7.4
^ permalink raw reply related [flat|nested] 8+ messages in thread
* [PATCH v3 2/2] [media] atmel-isc: DT binding for Image Sensor Controller driver
2016-05-31 6:58 [PATCH v3 0/2] [media] atmel-isc: add driver for Atmel ISC Songjun Wu
2016-05-31 6:58 ` [PATCH v3 1/2] [media] atmel-isc: add the Image Sensor Controller code Songjun Wu
@ 2016-05-31 6:58 ` Songjun Wu
2016-06-02 23:16 ` Rob Herring
2016-05-31 7:17 ` [PATCH v3 0/2] [media] atmel-isc: add driver for Atmel ISC Geert Uytterhoeven
2 siblings, 1 reply; 8+ messages in thread
From: Songjun Wu @ 2016-05-31 6:58 UTC (permalink / raw)
To: g.liakhovetski, laurent.pinchart, nicolas.ferre, robh
Cc: linux-arm-kernel, Songjun Wu, devicetree, Kumar Gala,
linux-kernel, Ian Campbell, Rob Herring, Pawel Moll,
Mark Rutland
DT binding documentation for ISC driver.
Signed-off-by: Songjun Wu <songjun.wu@atmel.com>
---
Changes in v3:
- Remove the 'atmel,sensor-preferred'.
- Modify the isc clock node according to the Rob's remarks.
Changes in v2:
- Remove the unit address of the endpoint.
- Add the unit address to the clock node.
- Avoid using underscores in node names.
- Drop the "0x" in the unit address of the i2c node.
- Modify the description of 'atmel,sensor-preferred'.
- Add the description for the ISC internal clock.
.../devicetree/bindings/media/atmel-isc.txt | 88 ++++++++++++++++++++++
1 file changed, 88 insertions(+)
create mode 100644 Documentation/devicetree/bindings/media/atmel-isc.txt
diff --git a/Documentation/devicetree/bindings/media/atmel-isc.txt b/Documentation/devicetree/bindings/media/atmel-isc.txt
new file mode 100644
index 0000000..2ae1d60
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/atmel-isc.txt
@@ -0,0 +1,88 @@
+Atmel Image Sensor Controller (ISC)
+----------------------------------------------
+
+Required properties for ISC:
+- compatible
+ Must be "atmel,sama5d2-isc"
+- reg
+ Physical base address and length of the registers set for the device;
+- interrupts
+ Should contain IRQ line for the ISI;
+- clocks
+ List of clock specifiers, corresponding to entries in
+ the clock-names property;
+ Please refer to clock-bindings.txt.
+- clock-names
+ Required elements: "hclock", "ispck".
+- pinctrl-names, pinctrl-0
+ Please refer to pinctrl-bindings.txt.
+- isc-ispck
+ The clock for the ISC digital pipeline.
+ - compatible
+ Must be "atmel,sama5d2-isc-ispck".
+ - clock-cells
+ From common clock binding; should be set to 0.
+ - clocks
+ The clock source phandles.
+- isc-mck
+ The clock for the image sensor.
+ - compatible
+ Must be "atmel,sama5d2-isc-mck".
+ - clock-cells
+ From common clock binding; should be set to 0.
+ - clocks
+ The clock source phandles.
+
+ISC supports a single port node with parallel bus. It should contain one
+'port' child node with child 'endpoint' node. Please refer to the bindings
+defined in Documentation/devicetree/bindings/media/video-interfaces.txt.
+
+Example:
+isc: isc@f0008000 {
+ compatible = "atmel,sama5d2-isc";
+ reg = <0xf0008000 0x4000>;
+ interrupts = <46 IRQ_TYPE_LEVEL_HIGH 5>;
+ clocks = <&isc_clk>, <&isc_ispck>;
+ clock-names = "hclock", "ispck";
+
+ port {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ isc_0: endpoint {
+ remote-endpoint = <&ov7740_0>;
+ hsync-active = <1>;
+ vsync-active = <0>;
+ pclk-sample = <1>;
+ };
+ };
+
+ isc_ispck: isc-ispck@0 {
+ compatible = "atmel,sama5d2-isc-ispck";
+ #clock-cells = <0>;
+ clocks = <&isc_clk>, <&iscck>;
+ };
+
+ isc_mck: isc-mck@1 {
+ compatible = "atmel,sama5d2-isc-mck";
+ #clock-cells = <0>;
+ clocks = <&isc_clk>, <&iscck>, <&isc_gclk>;
+ };
+};
+
+i2c1: i2c@fc028000 {
+ ov7740: camera@21 {
+ compatible = "ovti,ov7740";
+ reg = <0x21>;
+
+ clocks = <&isc_mck>;
+ clock-names = "xvclk";
+ assigned-clocks = <&isc_mck>;
+ assigned-clock-rates = <24000000>;
+
+ port {
+ ov7740_0: endpoint {
+ remote-endpoint = <&isc_0>;
+ };
+ };
+};
--
2.7.4
^ permalink raw reply related [flat|nested] 8+ messages in thread
* Re: [PATCH v3 0/2] [media] atmel-isc: add driver for Atmel ISC
2016-05-31 6:58 [PATCH v3 0/2] [media] atmel-isc: add driver for Atmel ISC Songjun Wu
2016-05-31 6:58 ` [PATCH v3 1/2] [media] atmel-isc: add the Image Sensor Controller code Songjun Wu
2016-05-31 6:58 ` [PATCH v3 2/2] [media] atmel-isc: DT binding for Image Sensor Controller driver Songjun Wu
@ 2016-05-31 7:17 ` Geert Uytterhoeven
2 siblings, 0 replies; 8+ messages in thread
From: Geert Uytterhoeven @ 2016-05-31 7:17 UTC (permalink / raw)
To: Songjun Wu
Cc: Guennadi Liakhovetski, Laurent Pinchart, Nicolas Ferre,
Rob Herring, linux-arm-kernel, Fabien Dessenne, Ian Campbell,
devicetree, Mauro Carvalho Chehab, Richard Röjfors,
Benoit Parrot, Kumar Gala, linux-kernel, Mikhail Ulyanov,
Sudip Mukherjee, Rob Herring, Pawel Moll, Peter Griffin,
Hans Verkuil, Mark Rutland, Linux Media Mailing List,
Simon Horman
Hi Songjun,
On Tue, May 31, 2016 at 8:58 AM, Songjun Wu <songjun.wu@atmel.com> wrote:
> The Image Sensor Controller driver includes two parts.
> 1) Driver code to implement the ISC function.
> 2) Device tree binding documentation, it describes how
> to add the ISC in device tree.
Please reduce the CC list. Not everyone who ever touched a line in the
files you modified is working on media or atmel devices.
get_maintainer.pl gives hints, not exact lists of people.
Thanks!
Gr{oetje,eeting}s,
Geert
--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org
In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
-- Linus Torvalds
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [PATCH v3 2/2] [media] atmel-isc: DT binding for Image Sensor Controller driver
2016-05-31 6:58 ` [PATCH v3 2/2] [media] atmel-isc: DT binding for Image Sensor Controller driver Songjun Wu
@ 2016-06-02 23:16 ` Rob Herring
2016-06-03 11:10 ` Boris Brezillon
2016-06-06 6:42 ` Wu, Songjun
0 siblings, 2 replies; 8+ messages in thread
From: Rob Herring @ 2016-06-02 23:16 UTC (permalink / raw)
To: Songjun Wu
Cc: g.liakhovetski, laurent.pinchart, nicolas.ferre,
linux-arm-kernel, devicetree, Kumar Gala, linux-kernel,
Ian Campbell, Pawel Moll, Mark Rutland
On Tue, May 31, 2016 at 02:58:23PM +0800, Songjun Wu wrote:
> DT binding documentation for ISC driver.
>
> Signed-off-by: Songjun Wu <songjun.wu@atmel.com>
> ---
>
> Changes in v3:
> - Remove the 'atmel,sensor-preferred'.
> - Modify the isc clock node according to the Rob's remarks.
>
> Changes in v2:
> - Remove the unit address of the endpoint.
> - Add the unit address to the clock node.
> - Avoid using underscores in node names.
> - Drop the "0x" in the unit address of the i2c node.
> - Modify the description of 'atmel,sensor-preferred'.
> - Add the description for the ISC internal clock.
>
> .../devicetree/bindings/media/atmel-isc.txt | 88 ++++++++++++++++++++++
> 1 file changed, 88 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/media/atmel-isc.txt
>
> diff --git a/Documentation/devicetree/bindings/media/atmel-isc.txt b/Documentation/devicetree/bindings/media/atmel-isc.txt
> new file mode 100644
> index 0000000..2ae1d60
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/media/atmel-isc.txt
> @@ -0,0 +1,88 @@
> +Atmel Image Sensor Controller (ISC)
> +----------------------------------------------
> +
> +Required properties for ISC:
> +- compatible
> + Must be "atmel,sama5d2-isc"
> +- reg
> + Physical base address and length of the registers set for the device;
> +- interrupts
> + Should contain IRQ line for the ISI;
> +- clocks
> + List of clock specifiers, corresponding to entries in
> + the clock-names property;
> + Please refer to clock-bindings.txt.
> +- clock-names
> + Required elements: "hclock", "ispck".
> +- pinctrl-names, pinctrl-0
> + Please refer to pinctrl-bindings.txt.
> +- isc-ispck
> + The clock for the ISC digital pipeline.
> + - compatible
> + Must be "atmel,sama5d2-isc-ispck".
> + - clock-cells
> + From common clock binding; should be set to 0.
> + - clocks
> + The clock source phandles.
> +- isc-mck
> + The clock for the image sensor.
> + - compatible
> + Must be "atmel,sama5d2-isc-mck".
> + - clock-cells
> + From common clock binding; should be set to 0.
> + - clocks
> + The clock source phandles.
> +
> +ISC supports a single port node with parallel bus. It should contain one
> +'port' child node with child 'endpoint' node. Please refer to the bindings
> +defined in Documentation/devicetree/bindings/media/video-interfaces.txt.
> +
> +Example:
> +isc: isc@f0008000 {
> + compatible = "atmel,sama5d2-isc";
> + reg = <0xf0008000 0x4000>;
> + interrupts = <46 IRQ_TYPE_LEVEL_HIGH 5>;
> + clocks = <&isc_clk>, <&isc_ispck>;
> + clock-names = "hclock", "ispck";
> +
> + port {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + isc_0: endpoint {
> + remote-endpoint = <&ov7740_0>;
> + hsync-active = <1>;
> + vsync-active = <0>;
> + pclk-sample = <1>;
> + };
> + };
> +
> + isc_ispck: isc-ispck@0 {
Drop the unit-address. You should only have one if you have a reg
property.
> + compatible = "atmel,sama5d2-isc-ispck";
> + #clock-cells = <0>;
> + clocks = <&isc_clk>, <&iscck>;
> + };
> +
> + isc_mck: isc-mck@1 {
ditto.
I still think these should be implied by atmel,sama5d2-isc and not in
DT. The fact that you don't have any registers for them pretty much
indicates that. It is also strange that isc-ispck is used by isc. If
that is the only user, there is certainly no need to put it in DT.
> + compatible = "atmel,sama5d2-isc-mck";
> + #clock-cells = <0>;
> + clocks = <&isc_clk>, <&iscck>, <&isc_gclk>;
> + };
> +};
> +
> +i2c1: i2c@fc028000 {
> + ov7740: camera@21 {
> + compatible = "ovti,ov7740";
> + reg = <0x21>;
> +
> + clocks = <&isc_mck>;
> + clock-names = "xvclk";
> + assigned-clocks = <&isc_mck>;
> + assigned-clock-rates = <24000000>;
> +
> + port {
> + ov7740_0: endpoint {
> + remote-endpoint = <&isc_0>;
> + };
> + };
> +};
> --
> 2.7.4
>
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [PATCH v3 2/2] [media] atmel-isc: DT binding for Image Sensor Controller driver
2016-06-02 23:16 ` Rob Herring
@ 2016-06-03 11:10 ` Boris Brezillon
2016-06-06 6:44 ` Wu, Songjun
2016-06-06 6:42 ` Wu, Songjun
1 sibling, 1 reply; 8+ messages in thread
From: Boris Brezillon @ 2016-06-03 11:10 UTC (permalink / raw)
To: Rob Herring, Songjun Wu
Cc: Mark Rutland, devicetree, Pawel Moll, Ian Campbell,
nicolas.ferre, linux-kernel, laurent.pinchart, Kumar Gala,
g.liakhovetski, linux-arm-kernel
On Thu, 2 Jun 2016 18:16:09 -0500
Rob Herring <robh@kernel.org> wrote:
> On Tue, May 31, 2016 at 02:58:23PM +0800, Songjun Wu wrote:
> > DT binding documentation for ISC driver.
> >
> > Signed-off-by: Songjun Wu <songjun.wu@atmel.com>
> > ---
> >
> > Changes in v3:
> > - Remove the 'atmel,sensor-preferred'.
> > - Modify the isc clock node according to the Rob's remarks.
> >
> > Changes in v2:
> > - Remove the unit address of the endpoint.
> > - Add the unit address to the clock node.
> > - Avoid using underscores in node names.
> > - Drop the "0x" in the unit address of the i2c node.
> > - Modify the description of 'atmel,sensor-preferred'.
> > - Add the description for the ISC internal clock.
> >
> > .../devicetree/bindings/media/atmel-isc.txt | 88 ++++++++++++++++++++++
> > 1 file changed, 88 insertions(+)
> > create mode 100644 Documentation/devicetree/bindings/media/atmel-isc.txt
> >
> > diff --git a/Documentation/devicetree/bindings/media/atmel-isc.txt b/Documentation/devicetree/bindings/media/atmel-isc.txt
> > new file mode 100644
> > index 0000000..2ae1d60
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/media/atmel-isc.txt
> > @@ -0,0 +1,88 @@
> > +Atmel Image Sensor Controller (ISC)
> > +----------------------------------------------
> > +
> > +Required properties for ISC:
> > +- compatible
> > + Must be "atmel,sama5d2-isc"
> > +- reg
> > + Physical base address and length of the registers set for the device;
> > +- interrupts
> > + Should contain IRQ line for the ISI;
> > +- clocks
> > + List of clock specifiers, corresponding to entries in
> > + the clock-names property;
> > + Please refer to clock-bindings.txt.
> > +- clock-names
> > + Required elements: "hclock", "ispck".
> > +- pinctrl-names, pinctrl-0
> > + Please refer to pinctrl-bindings.txt.
> > +- isc-ispck
> > + The clock for the ISC digital pipeline.
> > + - compatible
> > + Must be "atmel,sama5d2-isc-ispck".
> > + - clock-cells
> > + From common clock binding; should be set to 0.
> > + - clocks
> > + The clock source phandles.
> > +- isc-mck
> > + The clock for the image sensor.
> > + - compatible
> > + Must be "atmel,sama5d2-isc-mck".
> > + - clock-cells
> > + From common clock binding; should be set to 0.
> > + - clocks
> > + The clock source phandles.
> > +
> > +ISC supports a single port node with parallel bus. It should contain one
> > +'port' child node with child 'endpoint' node. Please refer to the bindings
> > +defined in Documentation/devicetree/bindings/media/video-interfaces.txt.
> > +
> > +Example:
> > +isc: isc@f0008000 {
> > + compatible = "atmel,sama5d2-isc";
> > + reg = <0xf0008000 0x4000>;
> > + interrupts = <46 IRQ_TYPE_LEVEL_HIGH 5>;
> > + clocks = <&isc_clk>, <&isc_ispck>;
> > + clock-names = "hclock", "ispck";
> > +
> > + port {
> > + #address-cells = <1>;
> > + #size-cells = <0>;
> > +
> > + isc_0: endpoint {
> > + remote-endpoint = <&ov7740_0>;
> > + hsync-active = <1>;
> > + vsync-active = <0>;
> > + pclk-sample = <1>;
> > + };
> > + };
> > +
> > + isc_ispck: isc-ispck@0 {
>
> Drop the unit-address. You should only have one if you have a reg
> property.
>
> > + compatible = "atmel,sama5d2-isc-ispck";
> > + #clock-cells = <0>;
> > + clocks = <&isc_clk>, <&iscck>;
> > + };
> > +
> > + isc_mck: isc-mck@1 {
>
> ditto.
>
> I still think these should be implied by atmel,sama5d2-isc and not in
> DT. The fact that you don't have any registers for them pretty much
> indicates that. It is also strange that isc-ispck is used by isc. If
> that is the only user, there is certainly no need to put it in DT.
I had a look at the block diagram, and it seems you are partially right.
The only clock that is really exported by the ISC is isc_mck (isc_pck is
not).
So I'd suggest dropping these clk sub-nodes, putting the #clock-cells,
and clock-names properties in the isc node, and then referencing the
isc node in you i2c device.
isc: isc@f0008000 {
compatible = "atmel,sama5d2-isc";
reg = <0xf0008000 0x4000>;
interrupts = <46 IRQ_TYPE_LEVEL_HIGH 5>;
clocks = <&isc_clk>, <&isc_ispck>;
clock-names = "hclock", "ispck";
#clock-cells = <0>;
clock-output-names = "isc-mck";
};
i2c1: i2c@fc028000 {
/* ... */
ov7740: camera@21 {
/* ... */
clocks = <&isc>;
clock-names = "xvclk";
}
};
If I'm wrong and the ISC IP is really exposing several clks, you just
have to change #clock-cells to 1, and use clocks = <&isc X>; in the i2c
device node.
Rob, Songjun, would you agree on this representation?
>
>
> > + compatible = "atmel,sama5d2-isc-mck";
> > + #clock-cells = <0>;
> > + clocks = <&isc_clk>, <&iscck>, <&isc_gclk>;
> > + };
> > +};
> > +
> > +i2c1: i2c@fc028000 {
> > + ov7740: camera@21 {
> > + compatible = "ovti,ov7740";
> > + reg = <0x21>;
> > +
> > + clocks = <&isc_mck>;
> > + clock-names = "xvclk";
> > + assigned-clocks = <&isc_mck>;
> > + assigned-clock-rates = <24000000>;
> > +
> > + port {
> > + ov7740_0: endpoint {
> > + remote-endpoint = <&isc_0>;
> > + };
> > + };
> > +};
> > --
> > 2.7.4
> >
>
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
--
Boris Brezillon, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [PATCH v3 2/2] [media] atmel-isc: DT binding for Image Sensor Controller driver
2016-06-02 23:16 ` Rob Herring
2016-06-03 11:10 ` Boris Brezillon
@ 2016-06-06 6:42 ` Wu, Songjun
1 sibling, 0 replies; 8+ messages in thread
From: Wu, Songjun @ 2016-06-06 6:42 UTC (permalink / raw)
To: Rob Herring
Cc: g.liakhovetski, laurent.pinchart, nicolas.ferre,
linux-arm-kernel, devicetree, Kumar Gala, linux-kernel,
Ian Campbell, Pawel Moll, Mark Rutland
Hi Rob,
Thank you for your comments.
On 6/3/2016 07:16, Rob Herring wrote:
> On Tue, May 31, 2016 at 02:58:23PM +0800, Songjun Wu wrote:
>> DT binding documentation for ISC driver.
>>
>> Signed-off-by: Songjun Wu <songjun.wu@atmel.com>
>> ---
>>
>> Changes in v3:
>> - Remove the 'atmel,sensor-preferred'.
>> - Modify the isc clock node according to the Rob's remarks.
>>
>> Changes in v2:
>> - Remove the unit address of the endpoint.
>> - Add the unit address to the clock node.
>> - Avoid using underscores in node names.
>> - Drop the "0x" in the unit address of the i2c node.
>> - Modify the description of 'atmel,sensor-preferred'.
>> - Add the description for the ISC internal clock.
>>
>> .../devicetree/bindings/media/atmel-isc.txt | 88 ++++++++++++++++++++++
>> 1 file changed, 88 insertions(+)
>> create mode 100644 Documentation/devicetree/bindings/media/atmel-isc.txt
>>
>> diff --git a/Documentation/devicetree/bindings/media/atmel-isc.txt b/Documentation/devicetree/bindings/media/atmel-isc.txt
>> new file mode 100644
>> index 0000000..2ae1d60
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/media/atmel-isc.txt
>> @@ -0,0 +1,88 @@
>> +Atmel Image Sensor Controller (ISC)
>> +----------------------------------------------
>> +
>> +Required properties for ISC:
>> +- compatible
>> + Must be "atmel,sama5d2-isc"
>> +- reg
>> + Physical base address and length of the registers set for the device;
>> +- interrupts
>> + Should contain IRQ line for the ISI;
>> +- clocks
>> + List of clock specifiers, corresponding to entries in
>> + the clock-names property;
>> + Please refer to clock-bindings.txt.
>> +- clock-names
>> + Required elements: "hclock", "ispck".
>> +- pinctrl-names, pinctrl-0
>> + Please refer to pinctrl-bindings.txt.
>> +- isc-ispck
>> + The clock for the ISC digital pipeline.
>> + - compatible
>> + Must be "atmel,sama5d2-isc-ispck".
>> + - clock-cells
>> + From common clock binding; should be set to 0.
>> + - clocks
>> + The clock source phandles.
>> +- isc-mck
>> + The clock for the image sensor.
>> + - compatible
>> + Must be "atmel,sama5d2-isc-mck".
>> + - clock-cells
>> + From common clock binding; should be set to 0.
>> + - clocks
>> + The clock source phandles.
>> +
>> +ISC supports a single port node with parallel bus. It should contain one
>> +'port' child node with child 'endpoint' node. Please refer to the bindings
>> +defined in Documentation/devicetree/bindings/media/video-interfaces.txt.
>> +
>> +Example:
>> +isc: isc@f0008000 {
>> + compatible = "atmel,sama5d2-isc";
>> + reg = <0xf0008000 0x4000>;
>> + interrupts = <46 IRQ_TYPE_LEVEL_HIGH 5>;
>> + clocks = <&isc_clk>, <&isc_ispck>;
>> + clock-names = "hclock", "ispck";
>> +
>> + port {
>> + #address-cells = <1>;
>> + #size-cells = <0>;
>> +
>> + isc_0: endpoint {
>> + remote-endpoint = <&ov7740_0>;
>> + hsync-active = <1>;
>> + vsync-active = <0>;
>> + pclk-sample = <1>;
>> + };
>> + };
>> +
>> + isc_ispck: isc-ispck@0 {
>
> Drop the unit-address. You should only have one if you have a reg
> property.
>
Accept. Thank you.
>> + compatible = "atmel,sama5d2-isc-ispck";
>> + #clock-cells = <0>;
>> + clocks = <&isc_clk>, <&iscck>;
>> + };
>> +
>> + isc_mck: isc-mck@1 {
>
> ditto.
>
> I still think these should be implied by atmel,sama5d2-isc and not in
> DT. The fact that you don't have any registers for them pretty much
> indicates that. It is also strange that isc-ispck is used by isc. If
> that is the only user, there is certainly no need to put it in DT.
>
The isc-ispck in only used by isc, it can be removed from DT.
Thank you.
>
>> + compatible = "atmel,sama5d2-isc-mck";
>> + #clock-cells = <0>;
>> + clocks = <&isc_clk>, <&iscck>, <&isc_gclk>;
>> + };
>> +};
>> +
>> +i2c1: i2c@fc028000 {
>> + ov7740: camera@21 {
>> + compatible = "ovti,ov7740";
>> + reg = <0x21>;
>> +
>> + clocks = <&isc_mck>;
>> + clock-names = "xvclk";
>> + assigned-clocks = <&isc_mck>;
>> + assigned-clock-rates = <24000000>;
>> +
>> + port {
>> + ov7740_0: endpoint {
>> + remote-endpoint = <&isc_0>;
>> + };
>> + };
>> +};
>> --
>> 2.7.4
>>
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [PATCH v3 2/2] [media] atmel-isc: DT binding for Image Sensor Controller driver
2016-06-03 11:10 ` Boris Brezillon
@ 2016-06-06 6:44 ` Wu, Songjun
0 siblings, 0 replies; 8+ messages in thread
From: Wu, Songjun @ 2016-06-06 6:44 UTC (permalink / raw)
To: Boris Brezillon, Rob Herring
Cc: Mark Rutland, devicetree, Pawel Moll, Ian Campbell,
nicolas.ferre, linux-kernel, laurent.pinchart, Kumar Gala,
g.liakhovetski, linux-arm-kernel
On 6/3/2016 19:10, Boris Brezillon wrote:
> On Thu, 2 Jun 2016 18:16:09 -0500
> Rob Herring <robh@kernel.org> wrote:
>
>> On Tue, May 31, 2016 at 02:58:23PM +0800, Songjun Wu wrote:
>>> DT binding documentation for ISC driver.
>>>
>>> Signed-off-by: Songjun Wu <songjun.wu@atmel.com>
>>> ---
>>>
>>> Changes in v3:
>>> - Remove the 'atmel,sensor-preferred'.
>>> - Modify the isc clock node according to the Rob's remarks.
>>>
>>> Changes in v2:
>>> - Remove the unit address of the endpoint.
>>> - Add the unit address to the clock node.
>>> - Avoid using underscores in node names.
>>> - Drop the "0x" in the unit address of the i2c node.
>>> - Modify the description of 'atmel,sensor-preferred'.
>>> - Add the description for the ISC internal clock.
>>>
>>> .../devicetree/bindings/media/atmel-isc.txt | 88 ++++++++++++++++++++++
>>> 1 file changed, 88 insertions(+)
>>> create mode 100644 Documentation/devicetree/bindings/media/atmel-isc.txt
>>>
>>> diff --git a/Documentation/devicetree/bindings/media/atmel-isc.txt b/Documentation/devicetree/bindings/media/atmel-isc.txt
>>> new file mode 100644
>>> index 0000000..2ae1d60
>>> --- /dev/null
>>> +++ b/Documentation/devicetree/bindings/media/atmel-isc.txt
>>> @@ -0,0 +1,88 @@
>>> +Atmel Image Sensor Controller (ISC)
>>> +----------------------------------------------
>>> +
>>> +Required properties for ISC:
>>> +- compatible
>>> + Must be "atmel,sama5d2-isc"
>>> +- reg
>>> + Physical base address and length of the registers set for the device;
>>> +- interrupts
>>> + Should contain IRQ line for the ISI;
>>> +- clocks
>>> + List of clock specifiers, corresponding to entries in
>>> + the clock-names property;
>>> + Please refer to clock-bindings.txt.
>>> +- clock-names
>>> + Required elements: "hclock", "ispck".
>>> +- pinctrl-names, pinctrl-0
>>> + Please refer to pinctrl-bindings.txt.
>>> +- isc-ispck
>>> + The clock for the ISC digital pipeline.
>>> + - compatible
>>> + Must be "atmel,sama5d2-isc-ispck".
>>> + - clock-cells
>>> + From common clock binding; should be set to 0.
>>> + - clocks
>>> + The clock source phandles.
>>> +- isc-mck
>>> + The clock for the image sensor.
>>> + - compatible
>>> + Must be "atmel,sama5d2-isc-mck".
>>> + - clock-cells
>>> + From common clock binding; should be set to 0.
>>> + - clocks
>>> + The clock source phandles.
>>> +
>>> +ISC supports a single port node with parallel bus. It should contain one
>>> +'port' child node with child 'endpoint' node. Please refer to the bindings
>>> +defined in Documentation/devicetree/bindings/media/video-interfaces.txt.
>>> +
>>> +Example:
>>> +isc: isc@f0008000 {
>>> + compatible = "atmel,sama5d2-isc";
>>> + reg = <0xf0008000 0x4000>;
>>> + interrupts = <46 IRQ_TYPE_LEVEL_HIGH 5>;
>>> + clocks = <&isc_clk>, <&isc_ispck>;
>>> + clock-names = "hclock", "ispck";
>>> +
>>> + port {
>>> + #address-cells = <1>;
>>> + #size-cells = <0>;
>>> +
>>> + isc_0: endpoint {
>>> + remote-endpoint = <&ov7740_0>;
>>> + hsync-active = <1>;
>>> + vsync-active = <0>;
>>> + pclk-sample = <1>;
>>> + };
>>> + };
>>> +
>>> + isc_ispck: isc-ispck@0 {
>>
>> Drop the unit-address. You should only have one if you have a reg
>> property.
>>
>>> + compatible = "atmel,sama5d2-isc-ispck";
>>> + #clock-cells = <0>;
>>> + clocks = <&isc_clk>, <&iscck>;
>>> + };
>>> +
>>> + isc_mck: isc-mck@1 {
>>
>> ditto.
>>
>> I still think these should be implied by atmel,sama5d2-isc and not in
>> DT. The fact that you don't have any registers for them pretty much
>> indicates that. It is also strange that isc-ispck is used by isc. If
>> that is the only user, there is certainly no need to put it in DT.
>
> I had a look at the block diagram, and it seems you are partially right.
> The only clock that is really exported by the ISC is isc_mck (isc_pck is
> not).
> So I'd suggest dropping these clk sub-nodes, putting the #clock-cells,
> and clock-names properties in the isc node, and then referencing the
> isc node in you i2c device.
>
> isc: isc@f0008000 {
> compatible = "atmel,sama5d2-isc";
> reg = <0xf0008000 0x4000>;
> interrupts = <46 IRQ_TYPE_LEVEL_HIGH 5>;
> clocks = <&isc_clk>, <&isc_ispck>;
> clock-names = "hclock", "ispck";
> #clock-cells = <0>;
> clock-output-names = "isc-mck";
> };
>
> i2c1: i2c@fc028000 {
> /* ... */
> ov7740: camera@21 {
> /* ... */
> clocks = <&isc>;
> clock-names = "xvclk";
> }
> };
>
> If I'm wrong and the ISC IP is really exposing several clks, you just
> have to change #clock-cells to 1, and use clocks = <&isc X>; in the i2c
> device node.
>
> Rob, Songjun, would you agree on this representation?
>
Agree, I think it's a good solution.
Thank you for your comments.
>>
>>
>>> + compatible = "atmel,sama5d2-isc-mck";
>>> + #clock-cells = <0>;
>>> + clocks = <&isc_clk>, <&iscck>, <&isc_gclk>;
>>> + };
>>> +};
>>> +
>>> +i2c1: i2c@fc028000 {
>>> + ov7740: camera@21 {
>>> + compatible = "ovti,ov7740";
>>> + reg = <0x21>;
>>> +
>>> + clocks = <&isc_mck>;
>>> + clock-names = "xvclk";
>>> + assigned-clocks = <&isc_mck>;
>>> + assigned-clock-rates = <24000000>;
>>> +
>>> + port {
>>> + ov7740_0: endpoint {
>>> + remote-endpoint = <&isc_0>;
>>> + };
>>> + };
>>> +};
>>> --
>>> 2.7.4
>>>
>>
>> _______________________________________________
>> linux-arm-kernel mailing list
>> linux-arm-kernel@lists.infradead.org
>> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
>
>
>
^ permalink raw reply [flat|nested] 8+ messages in thread
end of thread, other threads:[~2016-06-06 6:44 UTC | newest]
Thread overview: 8+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2016-05-31 6:58 [PATCH v3 0/2] [media] atmel-isc: add driver for Atmel ISC Songjun Wu
2016-05-31 6:58 ` [PATCH v3 1/2] [media] atmel-isc: add the Image Sensor Controller code Songjun Wu
2016-05-31 6:58 ` [PATCH v3 2/2] [media] atmel-isc: DT binding for Image Sensor Controller driver Songjun Wu
2016-06-02 23:16 ` Rob Herring
2016-06-03 11:10 ` Boris Brezillon
2016-06-06 6:44 ` Wu, Songjun
2016-06-06 6:42 ` Wu, Songjun
2016-05-31 7:17 ` [PATCH v3 0/2] [media] atmel-isc: add driver for Atmel ISC Geert Uytterhoeven
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).