[PATCH] regulator: anatop: allow regulator to be in bypass mode

[PATCH] regulator: anatop: allow regulator to be in bypass mode

[Mika Båtsman]

Bypass support was added in commit d38018f2019c ("regulator: anatop: Add
bypass support to digital LDOs"). A check for valid voltage selectors was
added in commit da0607c8df5c ("regulator: anatop: Fail on invalid voltage
selector") but it also discards all regulators that are in bypass mode. Add
check for the bypass setting. Errors below were seen on a Variscite mx6
board.

anatop_regulator 20c8000.anatop:regulator-vddcore@140: Failed to read a valid default voltage selector.
anatop_regulator: probe of 20c8000.anatop:regulator-vddcore@140 failed with error -22
anatop_regulator 20c8000.anatop:regulator-vddsoc@140: Failed to read a valid default voltage selector.
anatop_regulator: probe of 20c8000.anatop:regulator-vddsoc@140 failed with error -22

Signed-off-by: Mika Båtsman <mbatsman@mvista.com>
---
 drivers/regulator/anatop-regulator.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/regulator/anatop-regulator.c b/drivers/regulator/anatop-regulator.c
index 63cd5e6..3a6d029 100644
--- a/drivers/regulator/anatop-regulator.c
+++ b/drivers/regulator/anatop-regulator.c
@@ -296,7 +296,7 @@ static int anatop_regulator_probe(struct platform_device *pdev)
 		if (!sreg->sel && !strcmp(sreg->name, "vddpu"))
 			sreg->sel = 22;
 
-		if (!sreg->sel) {
+		if (!sreg->bypass && !sreg->sel) {
 			dev_err(&pdev->dev, "Failed to read a valid default voltage selector.\n");
 			return -EINVAL;
 		}
-- 
1.9.1