[PATCH v7 0/8] ACPI overlays

[PATCH v7 0/8] ACPI overlays

[Octavian Purdila]

This patch set enables custom ACPI board configuration by adding
mechanisms in the Linux kernel for loading user defined SSDTs.

Currently it is possible to load SSDT overlays using the upgrade
initrd mechanism introduced in 4.7. This patch series adds support for
two more methods:

* From an EFI variable

 This is the preferred method, when EFI is supported on the platform,
 because it allows a persistent, OS independent way of storing and
 updating the user defined SSDTs. There is also work underway to
 implement EFI support for loading user defined SSDTs and using this
 method will make it easier to convert to the EFI loading mechanism
 when that will arrive.

* From userspace via configfs

 This is useful when we want to defer the operation to userspace for
 platform detection, loading the SSDTs from a custom partition, etc.

Changes from v6:

 * make acpi_table_events_fn static, fix (c) year and fix a typo

Changes from v5:

* EFI: enable duplicate detection to avoid firmware bugs that returns the
same variable over and over again; this requires pushing the entry
allocation back into efivar_ssdt_iter() and creating a temporary list
that is iterated over in efivar_ssdt_load()

* EFI: marked efivar_ssdt with __initdata

Octavian Purdila (8):
  Documentation: acpi: add SSDT overlays documentation
  acpi: fix enumeration (visited) flags for bus rescans
  acpi: add support for ACPI reconfiguration notifiers
  i2c: add support for ACPI reconfigure notifications
  spi: add support for ACPI reconfigure notifications
  efi: load SSTDs from EFI variables
  acpi: add support for configfs
  acpi: add support for loading SSDTs via configfs

 Documentation/ABI/testing/configfs-acpi |  36 +++++
 Documentation/acpi/ssdt-overlays.txt    | 172 ++++++++++++++++++++
 Documentation/kernel-parameters.txt     |   7 +
 MAINTAINERS                             |   1 +
 drivers/acpi/Kconfig                    |   8 +
 drivers/acpi/Makefile                   |   1 +
 drivers/acpi/bus.c                      |   9 ++
 drivers/acpi/configfs.c                 | 267 ++++++++++++++++++++++++++++++++
 drivers/acpi/internal.h                 |   3 +
 drivers/acpi/scan.c                     |  81 +++++++++-
 drivers/acpi/sysfs.c                    |   6 +-
 drivers/firmware/efi/efi.c              |  96 ++++++++++++
 drivers/i2c/i2c-core.c                  | 175 ++++++++++++++++-----
 drivers/spi/spi.c                       | 100 +++++++++++-
 include/linux/acpi.h                    |  36 +++++
 15 files changed, 942 insertions(+), 56 deletions(-)
 create mode 100644 Documentation/ABI/testing/configfs-acpi
 create mode 100644 Documentation/acpi/ssdt-overlays.txt
 create mode 100644 drivers/acpi/configfs.c

-- 
2.7.4

[PATCH v7 1/8] Documentation: acpi: add SSDT overlays documentation

[Octavian Purdila]

Signed-off-by: Octavian Purdila <octavian.purdila@intel.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
---
 Documentation/acpi/ssdt-overlays.txt | 91 ++++++++++++++++++++++++++++++++++++
 1 file changed, 91 insertions(+)
 create mode 100644 Documentation/acpi/ssdt-overlays.txt

diff --git a/Documentation/acpi/ssdt-overlays.txt b/Documentation/acpi/ssdt-overlays.txt
new file mode 100644
index 0000000..8050259
--- /dev/null
+++ b/Documentation/acpi/ssdt-overlays.txt
@@ -0,0 +1,91 @@
+
+In order to support ACPI open-ended hardware configurations (e.g. development
+boards) we need a way to augment the ACPI configuration provided by the firmware
+image. A common example is connecting sensors on I2C / SPI buses on development
+boards.
+
+Although this can be accomplished by creating a kernel platform driver or
+recompiling the firmware image with updated ACPI tables, neither is practical:
+the former proliferates board specific kernel code while the latter requires
+access to firmware tools which are often not publicly available.
+
+Because ACPI supports external references in AML code a more practical
+way to augment firmware ACPI configuration is by dynamically loading
+user defined SSDT tables that contain the board specific information.
+
+For example, to enumerate a Bosch BMA222E accelerometer on the I2C bus of the
+Minnowboard MAX development board exposed via the LSE connector [1], the
+following ASL code can be used:
+
+DefinitionBlock ("minnowmax.aml", "SSDT", 1, "Vendor", "Accel", 0x00000003)
+{
+    External (\_SB.I2C6, DeviceObj)
+
+    Scope (\_SB.I2C6)
+    {
+        Device (STAC)
+        {
+            Name (_ADR, Zero)
+            Name (_HID, "BMA222E")
+
+            Method (_CRS, 0, Serialized)
+            {
+                Name (RBUF, ResourceTemplate ()
+                {
+                    I2cSerialBus (0x0018, ControllerInitiated, 0x00061A80,
+                                  AddressingMode7Bit, "\\_SB.I2C6", 0x00,
+                                  ResourceConsumer, ,)
+                    GpioInt (Edge, ActiveHigh, Exclusive, PullDown, 0x0000,
+                             "\\_SB.GPO2", 0x00, ResourceConsumer, , )
+                    { // Pin list
+                        0
+                    }
+                })
+                Return (RBUF)
+            }
+        }
+    }
+}
+
+which can then be compiled to AML binary format:
+
+$ iasl minnowmax.asl
+
+Intel ACPI Component Architecture
+ASL Optimizing Compiler version 20140214-64 [Mar 29 2014]
+Copyright (c) 2000 - 2014 Intel Corporation
+
+ASL Input:     minnomax.asl - 30 lines, 614 bytes, 7 keywords
+AML Output:    minnowmax.aml - 165 bytes, 6 named objects, 1 executable opcodes
+
+[1] http://wiki.minnowboard.org/MinnowBoard_MAX#Low_Speed_Expansion_Connector_.28Top.29
+
+The resulting AML code can then be loaded by the kernel using one of the methods
+below.
+
+== Loading ACPI SSDTs from initrd ==
+
+This option allows loading of user defined SSDTs from initrd and it is useful
+when the system does not support EFI or when there is not enough EFI storage.
+
+It works in a similar way with initrd based ACPI tables override/upgrade: SSDT
+aml code must be placed in the first, uncompressed, initrd under the
+"kernel/firmware/acpi" path. Multiple files can be used and this will translate
+in loading multiple tables. Only SSDT and OEM tables are allowed. See
+initrd_table_override.txt for more details.
+
+Here is an example:
+
+# Add the raw ACPI tables to an uncompressed cpio archive.
+# They must be put into a /kernel/firmware/acpi directory inside the
+# cpio archive.
+# The uncompressed cpio archive must be the first.
+# Other, typically compressed cpio archives, must be
+# concatenated on top of the uncompressed one.
+mkdir -p kernel/firmware/acpi
+cp ssdt.aml kernel/firmware/acpi
+
+# Create the uncompressed cpio archive and concatenate the original initrd
+# on top:
+find kernel | cpio -H newc --create > /boot/instrumented_initrd
+cat /boot/initrd >>/boot/instrumented_initrd
-- 
2.7.4

[PATCH v7 2/8] acpi: fix enumeration (visited) flags for bus rescans

[Octavian Purdila]

If the ACPI tables changes as a result of a dinamically loaded table and
a bus rescan is required the enumeration/visited flag are not
consistent.

I2C/SPI are not directly enumerated in acpi_bus_attach(), however the
visited flag is set. This makes it impossible to check if an ACPI device
has already been enumerated by the I2C and SPI subsystems. To fix this
issue we only set the visited flags if the device is not I2C or SPI.

With this change we also need to remove setting visited to false from
acpi_bus_attach(), otherwise if we rescan already enumerated I2C/SPI
devices we try to re-enumerate them.

Note that I2C/SPI devices can be enumerated either via a scan handler
(when using PRP0001) or via regular device_attach(). In either case
the flow goes through acpi_default_enumeration() which makes it the
ideal place to mark the ACPI device as enumerated.

Signed-off-by: Octavian Purdila <octavian.purdila@intel.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
---
 drivers/acpi/scan.c  | 13 +++++++------
 include/linux/acpi.h | 18 ++++++++++++++++++
 2 files changed, 25 insertions(+), 6 deletions(-)

diff --git a/drivers/acpi/scan.c b/drivers/acpi/scan.c
index 5f28cf7..f80f8a7 100644
--- a/drivers/acpi/scan.c
+++ b/drivers/acpi/scan.c
@@ -1406,7 +1406,7 @@ void acpi_init_device_object(struct acpi_device *device, acpi_handle handle,
 	acpi_bus_get_flags(device);
 	device->flags.match_driver = false;
 	device->flags.initialized = true;
-	device->flags.visited = false;
+	acpi_device_clear_enumerated(device);
 	device_initialize(&device->dev);
 	dev_set_uevent_suppress(&device->dev, true);
 	acpi_init_coherency(device);
@@ -1683,8 +1683,10 @@ static void acpi_default_enumeration(struct acpi_device *device)
 	acpi_dev_get_resources(device, &resource_list, acpi_check_spi_i2c_slave,
 			       &is_spi_i2c_slave);
 	acpi_dev_free_resource_list(&resource_list);
-	if (!is_spi_i2c_slave)
+	if (!is_spi_i2c_slave) {
 		acpi_create_platform_device(device);
+		acpi_device_set_enumerated(device);
+	}
 }
 
 static const struct acpi_device_id generic_device_ids[] = {
@@ -1751,7 +1753,7 @@ static void acpi_bus_attach(struct acpi_device *device)
 	acpi_bus_get_status(device);
 	/* Skip devices that are not present. */
 	if (!acpi_device_is_present(device)) {
-		device->flags.visited = false;
+		acpi_device_clear_enumerated(device);
 		device->flags.power_manageable = 0;
 		return;
 	}
@@ -1766,7 +1768,7 @@ static void acpi_bus_attach(struct acpi_device *device)
 
 		device->flags.initialized = true;
 	}
-	device->flags.visited = false;
+
 	ret = acpi_scan_attach_handler(device);
 	if (ret < 0)
 		return;
@@ -1780,7 +1782,6 @@ static void acpi_bus_attach(struct acpi_device *device)
 		if (!ret && device->pnp.type.platform_id)
 			acpi_default_enumeration(device);
 	}
-	device->flags.visited = true;
 
  ok:
 	list_for_each_entry(child, &device->children, node)
@@ -1872,7 +1873,7 @@ void acpi_bus_trim(struct acpi_device *adev)
 	 */
 	acpi_device_set_power(adev, ACPI_STATE_D3_COLD);
 	adev->flags.initialized = false;
-	adev->flags.visited = false;
+	acpi_device_clear_enumerated(adev);
 }
 EXPORT_SYMBOL_GPL(acpi_bus_trim);
 
diff --git a/include/linux/acpi.h b/include/linux/acpi.h
index 288fac5..7089e99 100644
--- a/include/linux/acpi.h
+++ b/include/linux/acpi.h
@@ -532,6 +532,16 @@ void acpi_walk_dep_device_list(acpi_handle handle);
 struct platform_device *acpi_create_platform_device(struct acpi_device *);
 #define ACPI_PTR(_ptr)	(_ptr)
 
+static inline void acpi_device_set_enumerated(struct acpi_device *adev)
+{
+	adev->flags.visited = true;
+}
+
+static inline void acpi_device_clear_enumerated(struct acpi_device *adev)
+{
+	adev->flags.visited = false;
+}
+
 #else	/* !CONFIG_ACPI */
 
 #define acpi_disabled 1
@@ -678,6 +688,14 @@ static inline enum dev_dma_attr acpi_get_dma_attr(struct acpi_device *adev)
 
 #define ACPI_PTR(_ptr)	(NULL)
 
+static inline void acpi_device_set_enumerated(struct acpi_device *adev)
+{
+}
+
+static inline void acpi_device_clear_enumerated(struct acpi_device *adev)
+{
+}
+
 #endif	/* !CONFIG_ACPI */
 
 #ifdef CONFIG_ACPI
-- 
2.7.4

[PATCH v7 3/8] acpi: add support for ACPI reconfiguration notifiers

[Octavian Purdila]

Add support for ACPI reconfiguration notifiers to allow subsystems to
react to changes in the ACPI tables that happen after the initial
enumeration. This is similar with the way dynamic device tree
notifications work.

The reconfigure notifications supported for now are device add and
device remove.

Since ACPICA allows only one table notification handler, this patch
makes the table notifier function generic and moves it out of the
sysfs specific code.

Signed-off-by: Octavian Purdila <octavian.purdila@intel.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
---
 drivers/acpi/bus.c      |  9 +++++++
 drivers/acpi/internal.h |  3 +++
 drivers/acpi/scan.c     | 68 ++++++++++++++++++++++++++++++++++++++++++++++++-
 drivers/acpi/sysfs.c    |  6 ++---
 include/linux/acpi.h    | 18 +++++++++++++
 5 files changed, 99 insertions(+), 5 deletions(-)

diff --git a/drivers/acpi/bus.c b/drivers/acpi/bus.c
index 262ca31..97e270e 100644
--- a/drivers/acpi/bus.c
+++ b/drivers/acpi/bus.c
@@ -990,6 +990,13 @@ void __init acpi_subsystem_init(void)
 	}
 }
 
+static acpi_status acpi_bus_table_handler(u32 event, void *table, void *context)
+{
+	acpi_scan_table_handler(event, table, context);
+
+	return acpi_sysfs_table_handler(event, table, context);
+}
+
 static int __init acpi_bus_init(void)
 {
 	int result;
@@ -1043,6 +1050,8 @@ static int __init acpi_bus_init(void)
 	 * _PDC control method may load dynamic SSDT tables,
 	 * and we need to install the table handler before that.
 	 */
+	status = acpi_install_table_handler(acpi_bus_table_handler, NULL);
+
 	acpi_sysfs_init();
 
 	acpi_early_processor_set_pdc();
diff --git a/drivers/acpi/internal.h b/drivers/acpi/internal.h
index 27cc7fe..940218f 100644
--- a/drivers/acpi/internal.h
+++ b/drivers/acpi/internal.h
@@ -87,6 +87,9 @@ bool acpi_queue_hotplug_work(struct work_struct *work);
 void acpi_device_hotplug(struct acpi_device *adev, u32 src);
 bool acpi_scan_is_offline(struct acpi_device *adev, bool uevent);
 
+acpi_status acpi_sysfs_table_handler(u32 event, void *table, void *context);
+void acpi_scan_table_handler(u32 event, void *table, void *context);
+
 /* --------------------------------------------------------------------------
                      Device Node Initialization / Removal
    -------------------------------------------------------------------------- */
diff --git a/drivers/acpi/scan.c b/drivers/acpi/scan.c
index f80f8a7..405056b 100644
--- a/drivers/acpi/scan.c
+++ b/drivers/acpi/scan.c
@@ -494,6 +494,8 @@ static void acpi_device_del(struct acpi_device *device)
 	device_del(&device->dev);
 }
 
+static BLOCKING_NOTIFIER_HEAD(acpi_reconfig_chain);
+
 static LIST_HEAD(acpi_device_del_list);
 static DEFINE_MUTEX(acpi_device_del_lock);
 
@@ -514,6 +516,9 @@ static void acpi_device_del_work_fn(struct work_struct *work_not_used)
 
 		mutex_unlock(&acpi_device_del_lock);
 
+		blocking_notifier_call_chain(&acpi_reconfig_chain,
+					     ACPI_RECONFIG_DEVICE_REMOVE, adev);
+
 		acpi_device_del(adev);
 		/*
 		 * Drop references to all power resources that might have been
@@ -1676,7 +1681,7 @@ static void acpi_default_enumeration(struct acpi_device *device)
 	bool is_spi_i2c_slave = false;
 
 	/*
-	 * Do not enemerate SPI/I2C slaves as they will be enuerated by their
+	 * Do not enumerate SPI/I2C slaves as they will be enumerated by their
 	 * respective parents.
 	 */
 	INIT_LIST_HEAD(&resource_list);
@@ -1686,6 +1691,9 @@ static void acpi_default_enumeration(struct acpi_device *device)
 	if (!is_spi_i2c_slave) {
 		acpi_create_platform_device(device);
 		acpi_device_set_enumerated(device);
+	} else {
+		blocking_notifier_call_chain(&acpi_reconfig_chain,
+					     ACPI_RECONFIG_DEVICE_ADD, device);
 	}
 }
 
@@ -1917,6 +1925,8 @@ static int acpi_bus_scan_fixed(void)
 	return result < 0 ? result : 0;
 }
 
+static bool acpi_scan_initialized;
+
 int __init acpi_scan_init(void)
 {
 	int result;
@@ -1961,6 +1971,8 @@ int __init acpi_scan_init(void)
 
 	acpi_update_all_gpes();
 
+	acpi_scan_initialized = true;
+
  out:
 	mutex_unlock(&acpi_scan_lock);
 	return result;
@@ -2004,3 +2016,57 @@ int __init __acpi_probe_device_table(struct acpi_probe_entry *ap_head, int nr)
 
 	return count;
 }
+
+struct acpi_table_events_work {
+	struct work_struct work;
+	void *table;
+	u32 event;
+};
+
+static void acpi_table_events_fn(struct work_struct *work)
+{
+	struct acpi_table_events_work *tew;
+
+	tew = container_of(work, struct acpi_table_events_work, work);
+
+	if (tew->event == ACPI_TABLE_EVENT_LOAD) {
+		acpi_scan_lock_acquire();
+		acpi_bus_scan(ACPI_ROOT_OBJECT);
+		acpi_scan_lock_release();
+	}
+
+	kfree(tew);
+}
+
+void acpi_scan_table_handler(u32 event, void *table, void *context)
+{
+	struct acpi_table_events_work *tew;
+
+	if (!acpi_scan_initialized)
+		return;
+
+	if (event != ACPI_TABLE_EVENT_LOAD)
+		return;
+
+	tew = kmalloc(sizeof(*tew), GFP_KERNEL);
+	if (!tew)
+		return;
+
+	INIT_WORK(&tew->work, acpi_table_events_fn);
+	tew->table = table;
+	tew->event = event;
+
+	schedule_work(&tew->work);
+}
+
+int acpi_reconfig_notifier_register(struct notifier_block *nb)
+{
+	return blocking_notifier_chain_register(&acpi_reconfig_chain, nb);
+}
+EXPORT_SYMBOL(acpi_reconfig_notifier_register);
+
+int acpi_reconfig_notifier_unregister(struct notifier_block *nb)
+{
+	return blocking_notifier_chain_unregister(&acpi_reconfig_chain, nb);
+}
+EXPORT_SYMBOL(acpi_reconfig_notifier_unregister);
diff --git a/drivers/acpi/sysfs.c b/drivers/acpi/sysfs.c
index 4b3a9e2..358165e 100644
--- a/drivers/acpi/sysfs.c
+++ b/drivers/acpi/sysfs.c
@@ -378,8 +378,7 @@ static void acpi_table_attr_init(struct acpi_table_attr *table_attr,
 	return;
 }
 
-static acpi_status
-acpi_sysfs_table_handler(u32 event, void *table, void *context)
+acpi_status acpi_sysfs_table_handler(u32 event, void *table, void *context)
 {
 	struct acpi_table_attr *table_attr;
 
@@ -452,9 +451,8 @@ static int acpi_tables_sysfs_init(void)
 
 	kobject_uevent(tables_kobj, KOBJ_ADD);
 	kobject_uevent(dynamic_tables_kobj, KOBJ_ADD);
-	status = acpi_install_table_handler(acpi_sysfs_table_handler, NULL);
 
-	return ACPI_FAILURE(status) ? -EINVAL : 0;
+	return 0;
 err_dynamic_tables:
 	kobject_put(tables_kobj);
 err:
diff --git a/include/linux/acpi.h b/include/linux/acpi.h
index 7089e99..ac93253 100644
--- a/include/linux/acpi.h
+++ b/include/linux/acpi.h
@@ -542,6 +542,14 @@ static inline void acpi_device_clear_enumerated(struct acpi_device *adev)
 	adev->flags.visited = false;
 }
 
+enum acpi_reconfig_event  {
+	ACPI_RECONFIG_DEVICE_ADD = 0,
+	ACPI_RECONFIG_DEVICE_REMOVE,
+};
+
+int acpi_reconfig_notifier_register(struct notifier_block *nb);
+int acpi_reconfig_notifier_unregister(struct notifier_block *nb);
+
 #else	/* !CONFIG_ACPI */
 
 #define acpi_disabled 1
@@ -696,6 +704,16 @@ static inline void acpi_device_clear_enumerated(struct acpi_device *adev)
 {
 }
 
+static inline int acpi_reconfig_notifier_register(struct notifier_block *nb)
+{
+	return -EINVAL;
+}
+
+static inline int acpi_reconfig_notifier_unregister(struct notifier_block *nb)
+{
+	return -EINVAL;
+}
+
 #endif	/* !CONFIG_ACPI */
 
 #ifdef CONFIG_ACPI
-- 
2.7.4

[PATCH v7 4/8] i2c: add support for ACPI reconfigure notifications

[Octavian Purdila]

This patch adds supports for I2C device enumeration and removal via
ACPI reconfiguration notifications that are send as a result of an
ACPI table load or unload operation.

The code is very similar with the device tree reconfiguration code
with only small differences in the way we test and set the enumerated
state of the device:

 * the equivalent of device tree's OF_POPULATED flag is the
   flags.visited field in the ACPI device and the following
   wrappers are used to manipulate it: acpi_device_enumerated(),
   acpi_device_set_enumerated() and acpi_device_clear_enumerated()

 * the device tree code checks of status of the OF_POPULATED flag to
   avoid trying to create duplicate Linux devices in two places: once
   when the controller is probed, and once when the reconfigure event
   is received; in the ACPI code the check is performed only once when
   the ACPI namespace is searched because this code path is invoked in
   both of the two mentioned cases

The rest of the enumeration handling is similar with device tree: when
the Linux device is unregistered the ACPI device is marked as not
enumerated; also, when a device remove notification is received we
check that the device is in the enumerated state before continuing
with the removal of the Linux device.

Signed-off-by: Octavian Purdila <octavian.purdila@intel.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Acked-by: Wolfram Sang <wsa@the-dreams.de>
---
 drivers/i2c/i2c-core.c | 175 ++++++++++++++++++++++++++++++++++++++-----------
 1 file changed, 137 insertions(+), 38 deletions(-)

diff --git a/drivers/i2c/i2c-core.c b/drivers/i2c/i2c-core.c
index af11b65..74e5aea 100644
--- a/drivers/i2c/i2c-core.c
+++ b/drivers/i2c/i2c-core.c
@@ -107,12 +107,11 @@ struct acpi_i2c_lookup {
 	acpi_handle device_handle;
 };
 
-static int acpi_i2c_find_address(struct acpi_resource *ares, void *data)
+static int acpi_i2c_fill_info(struct acpi_resource *ares, void *data)
 {
 	struct acpi_i2c_lookup *lookup = data;
 	struct i2c_board_info *info = lookup->info;
 	struct acpi_resource_i2c_serialbus *sb;
-	acpi_handle adapter_handle;
 	acpi_status status;
 
 	if (info->addr || ares->type != ACPI_RESOURCE_TYPE_SERIAL_BUS)
@@ -122,80 +121,102 @@ static int acpi_i2c_find_address(struct acpi_resource *ares, void *data)
 	if (sb->type != ACPI_RESOURCE_SERIAL_TYPE_I2C)
 		return 1;
 
-	/*
-	 * Extract the ResourceSource and make sure that the handle matches
-	 * with the I2C adapter handle.
-	 */
 	status = acpi_get_handle(lookup->device_handle,
 				 sb->resource_source.string_ptr,
-				 &adapter_handle);
-	if (ACPI_SUCCESS(status) && adapter_handle == lookup->adapter_handle) {
-		info->addr = sb->slave_address;
-		if (sb->access_mode == ACPI_I2C_10BIT_MODE)
-			info->flags |= I2C_CLIENT_TEN;
-	}
+				 &lookup->adapter_handle);
+	if (!ACPI_SUCCESS(status))
+		return 1;
+
+	info->addr = sb->slave_address;
+	if (sb->access_mode == ACPI_I2C_10BIT_MODE)
+		info->flags |= I2C_CLIENT_TEN;
 
 	return 1;
 }
 
-static acpi_status acpi_i2c_add_device(acpi_handle handle, u32 level,
-				       void *data, void **return_value)
+static int acpi_i2c_get_info(struct acpi_device *adev,
+			     struct i2c_board_info *info,
+			     acpi_handle *adapter_handle)
 {
-	struct i2c_adapter *adapter = data;
 	struct list_head resource_list;
-	struct acpi_i2c_lookup lookup;
 	struct resource_entry *entry;
-	struct i2c_board_info info;
-	struct acpi_device *adev;
+	struct acpi_i2c_lookup lookup;
 	int ret;
 
-	if (acpi_bus_get_device(handle, &adev))
-		return AE_OK;
-	if (acpi_bus_get_status(adev) || !adev->status.present)
-		return AE_OK;
+	if (acpi_bus_get_status(adev) || !adev->status.present ||
+	    acpi_device_enumerated(adev))
+		return -EINVAL;
 
-	memset(&info, 0, sizeof(info));
-	info.fwnode = acpi_fwnode_handle(adev);
+	memset(info, 0, sizeof(*info));
+	info->fwnode = acpi_fwnode_handle(adev);
 
 	memset(&lookup, 0, sizeof(lookup));
-	lookup.adapter_handle = ACPI_HANDLE(&adapter->dev);
-	lookup.device_handle = handle;
-	lookup.info = &info;
+	lookup.device_handle = acpi_device_handle(adev);
+	lookup.info = info;
 
-	/*
-	 * Look up for I2cSerialBus resource with ResourceSource that
-	 * matches with this adapter.
-	 */
+	/* Look up for I2cSerialBus resource */
 	INIT_LIST_HEAD(&resource_list);
 	ret = acpi_dev_get_resources(adev, &resource_list,
-				     acpi_i2c_find_address, &lookup);
+				     acpi_i2c_fill_info, &lookup);
 	acpi_dev_free_resource_list(&resource_list);
 
-	if (ret < 0 || !info.addr)
-		return AE_OK;
+	if (ret < 0 || !info->addr)
+		return -EINVAL;
+
+	*adapter_handle = lookup.adapter_handle;
 
 	/* Then fill IRQ number if any */
 	ret = acpi_dev_get_resources(adev, &resource_list, NULL, NULL);
 	if (ret < 0)
-		return AE_OK;
+		return -EINVAL;
 
 	resource_list_for_each_entry(entry, &resource_list) {
 		if (resource_type(entry->res) == IORESOURCE_IRQ) {
-			info.irq = entry->res->start;
+			info->irq = entry->res->start;
 			break;
 		}
 	}
 
 	acpi_dev_free_resource_list(&resource_list);
 
+	strlcpy(info->type, dev_name(&adev->dev), sizeof(info->type));
+
+	return 0;
+}
+
+static void acpi_i2c_register_device(struct i2c_adapter *adapter,
+				     struct acpi_device *adev,
+				     struct i2c_board_info *info)
+{
 	adev->power.flags.ignore_parent = true;
-	strlcpy(info.type, dev_name(&adev->dev), sizeof(info.type));
-	if (!i2c_new_device(adapter, &info)) {
+	acpi_device_set_enumerated(adev);
+
+	if (!i2c_new_device(adapter, info)) {
 		adev->power.flags.ignore_parent = false;
 		dev_err(&adapter->dev,
 			"failed to add I2C device %s from ACPI\n",
 			dev_name(&adev->dev));
 	}
+}
+
+static acpi_status acpi_i2c_add_device(acpi_handle handle, u32 level,
+				       void *data, void **return_value)
+{
+	struct i2c_adapter *adapter = data;
+	struct acpi_device *adev;
+	acpi_handle adapter_handle;
+	struct i2c_board_info info;
+
+	if (acpi_bus_get_device(handle, &adev))
+		return AE_OK;
+
+	if (acpi_i2c_get_info(adev, &info, &adapter_handle))
+		return AE_OK;
+
+	if (adapter_handle != ACPI_HANDLE(&adapter->dev))
+		return AE_OK;
+
+	acpi_i2c_register_device(adapter, adev, &info);
 
 	return AE_OK;
 }
@@ -225,8 +246,80 @@ static void acpi_i2c_register_devices(struct i2c_adapter *adap)
 		dev_warn(&adap->dev, "failed to enumerate I2C slaves\n");
 }
 
+static int acpi_i2c_match_adapter(struct device *dev, void *data)
+{
+	struct i2c_adapter *adapter = i2c_verify_adapter(dev);
+
+	if (!adapter)
+		return 0;
+
+	return ACPI_HANDLE(dev) == (acpi_handle)data;
+}
+
+static int acpi_i2c_match_device(struct device *dev, void *data)
+{
+	return ACPI_COMPANION(dev) == data;
+}
+
+static struct i2c_adapter *acpi_i2c_find_adapter_by_handle(acpi_handle handle)
+{
+	struct device *dev;
+
+	dev = bus_find_device(&i2c_bus_type, NULL, handle,
+			      acpi_i2c_match_adapter);
+	return dev ? i2c_verify_adapter(dev) : NULL;
+}
+
+static struct i2c_client *acpi_i2c_find_client_by_adev(struct acpi_device *adev)
+{
+	struct device *dev;
+
+	dev = bus_find_device(&i2c_bus_type, NULL, adev, acpi_i2c_match_device);
+	return dev ? i2c_verify_client(dev) : NULL;
+}
+
+static int acpi_i2c_notify(struct notifier_block *nb, unsigned long value,
+			   void *arg)
+{
+	struct acpi_device *adev = arg;
+	struct i2c_board_info info;
+	acpi_handle adapter_handle;
+	struct i2c_adapter *adapter;
+	struct i2c_client *client;
+
+	switch (value) {
+	case ACPI_RECONFIG_DEVICE_ADD:
+		if (acpi_i2c_get_info(adev, &info, &adapter_handle))
+			break;
+
+		adapter = acpi_i2c_find_adapter_by_handle(adapter_handle);
+		if (!adapter)
+			break;
+
+		acpi_i2c_register_device(adapter, adev, &info);
+		break;
+	case ACPI_RECONFIG_DEVICE_REMOVE:
+		if (!acpi_device_enumerated(adev))
+			break;
+
+		client = acpi_i2c_find_client_by_adev(adev);
+		if (!client)
+			break;
+
+		i2c_unregister_device(client);
+		put_device(&client->dev);
+		break;
+	}
+
+	return NOTIFY_OK;
+}
+
+static struct notifier_block i2c_acpi_notifier = {
+	.notifier_call = acpi_i2c_notify,
+};
 #else /* CONFIG_ACPI */
 static inline void acpi_i2c_register_devices(struct i2c_adapter *adap) { }
+extern struct notifier_block i2c_acpi_notifier;
 #endif /* CONFIG_ACPI */
 
 #ifdef CONFIG_ACPI_I2C_OPREGION
@@ -1089,6 +1182,8 @@ void i2c_unregister_device(struct i2c_client *client)
 {
 	if (client->dev.of_node)
 		of_node_clear_flag(client->dev.of_node, OF_POPULATED);
+	if (ACPI_COMPANION(&client->dev))
+		acpi_device_clear_enumerated(ACPI_COMPANION(&client->dev));
 	device_unregister(&client->dev);
 }
 EXPORT_SYMBOL_GPL(i2c_unregister_device);
@@ -2117,6 +2212,8 @@ static int __init i2c_init(void)
 
 	if (IS_ENABLED(CONFIG_OF_DYNAMIC))
 		WARN_ON(of_reconfig_notifier_register(&i2c_of_notifier));
+	if (IS_ENABLED(CONFIG_ACPI))
+		WARN_ON(acpi_reconfig_notifier_register(&i2c_acpi_notifier));
 
 	return 0;
 
@@ -2132,6 +2229,8 @@ bus_err:
 
 static void __exit i2c_exit(void)
 {
+	if (IS_ENABLED(CONFIG_ACPI))
+		WARN_ON(acpi_reconfig_notifier_unregister(&i2c_acpi_notifier));
 	if (IS_ENABLED(CONFIG_OF_DYNAMIC))
 		WARN_ON(of_reconfig_notifier_unregister(&i2c_of_notifier));
 	i2c_del_driver(&dummy_driver);
-- 
2.7.4

[PATCH v7 5/8] spi: add support for ACPI reconfigure notifications

[Octavian Purdila]

This patch adds supports for SPI device enumeration and removal via
ACPI reconfiguration notifications that are send as a result of an
ACPI table load or unload operation.

The code is very similar with the device tree reconfiguration code
with only small differences in the way we test and set the enumerated
state of the device:

 * the equivalent of device tree's OF_POPULATED flag is the
   flags.visited field in the ACPI device and the following wrappers
   are used to manipulate it: acpi_device_enumerated(),
   acpi_device_set_enumerated() and acpi_device_clear_enumerated()

 * the device tree code checks of status of the OF_POPULATED flag to
   avoid trying to create duplicate Linux devices in two places: once
   when the controller is probed, and once when the reconfigure event
   is received; in the ACPI code the check is performed only once when
   the ACPI namespace is searched because this code path is invoked in
   both of the two mentioned cases

The rest of the enumeration handling is similar with device tree: when
the Linux device is unregistered the ACPI device is marked as not
enumerated; also, when a device remove notification is received we
check that the device is in the enumerated state before continuing
with the removal of the Linux device.

Signed-off-by: Octavian Purdila <octavian.purdila@intel.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Acked-by: Mark Brown <broonie@kernel.org>
---
 drivers/spi/spi.c | 100 ++++++++++++++++++++++++++++++++++++++++++++++++++----
 1 file changed, 93 insertions(+), 7 deletions(-)

diff --git a/drivers/spi/spi.c b/drivers/spi/spi.c
index 77e6e45..7589c8a 100644
--- a/drivers/spi/spi.c
+++ b/drivers/spi/spi.c
@@ -622,6 +622,8 @@ void spi_unregister_device(struct spi_device *spi)
 
 	if (spi->dev.of_node)
 		of_node_clear_flag(spi->dev.of_node, OF_POPULATED);
+	if (ACPI_COMPANION(&spi->dev))
+		acpi_device_clear_enumerated(ACPI_COMPANION(&spi->dev));
 	device_unregister(&spi->dev);
 }
 EXPORT_SYMBOL_GPL(spi_unregister_device);
@@ -1646,18 +1648,15 @@ static int acpi_spi_add_resource(struct acpi_resource *ares, void *data)
 	return 1;
 }
 
-static acpi_status acpi_spi_add_device(acpi_handle handle, u32 level,
-				       void *data, void **return_value)
+static acpi_status acpi_register_spi_device(struct spi_master *master,
+					    struct acpi_device *adev)
 {
-	struct spi_master *master = data;
 	struct list_head resource_list;
-	struct acpi_device *adev;
 	struct spi_device *spi;
 	int ret;
 
-	if (acpi_bus_get_device(handle, &adev))
-		return AE_OK;
-	if (acpi_bus_get_status(adev) || !adev->status.present)
+	if (acpi_bus_get_status(adev) || !adev->status.present ||
+	    acpi_device_enumerated(adev))
 		return AE_OK;
 
 	spi = spi_alloc_device(master);
@@ -1683,6 +1682,8 @@ static acpi_status acpi_spi_add_device(acpi_handle handle, u32 level,
 	if (spi->irq < 0)
 		spi->irq = acpi_dev_gpio_irq_get(adev, 0);
 
+	acpi_device_set_enumerated(adev);
+
 	adev->power.flags.ignore_parent = true;
 	strlcpy(spi->modalias, acpi_device_hid(adev), sizeof(spi->modalias));
 	if (spi_add_device(spi)) {
@@ -1695,6 +1696,18 @@ static acpi_status acpi_spi_add_device(acpi_handle handle, u32 level,
 	return AE_OK;
 }
 
+static acpi_status acpi_spi_add_device(acpi_handle handle, u32 level,
+				       void *data, void **return_value)
+{
+	struct spi_master *master = data;
+	struct acpi_device *adev;
+
+	if (acpi_bus_get_device(handle, &adev))
+		return AE_OK;
+
+	return acpi_register_spi_device(master, adev);
+}
+
 static void acpi_register_spi_devices(struct spi_master *master)
 {
 	acpi_status status;
@@ -3107,6 +3120,77 @@ static struct notifier_block spi_of_notifier = {
 extern struct notifier_block spi_of_notifier;
 #endif /* IS_ENABLED(CONFIG_OF_DYNAMIC) */
 
+#if IS_ENABLED(CONFIG_ACPI)
+static int spi_acpi_master_match(struct device *dev, const void *data)
+{
+	return ACPI_COMPANION(dev->parent) == data;
+}
+
+static int spi_acpi_device_match(struct device *dev, void *data)
+{
+	return ACPI_COMPANION(dev) == data;
+}
+
+static struct spi_master *acpi_spi_find_master_by_adev(struct acpi_device *adev)
+{
+	struct device *dev;
+
+	dev = class_find_device(&spi_master_class, NULL, adev,
+				spi_acpi_master_match);
+	if (!dev)
+		return NULL;
+
+	return container_of(dev, struct spi_master, dev);
+}
+
+static struct spi_device *acpi_spi_find_device_by_adev(struct acpi_device *adev)
+{
+	struct device *dev;
+
+	dev = bus_find_device(&spi_bus_type, NULL, adev, spi_acpi_device_match);
+
+	return dev ? to_spi_device(dev) : NULL;
+}
+
+static int acpi_spi_notify(struct notifier_block *nb, unsigned long value,
+			   void *arg)
+{
+	struct acpi_device *adev = arg;
+	struct spi_master *master;
+	struct spi_device *spi;
+
+	switch (value) {
+	case ACPI_RECONFIG_DEVICE_ADD:
+		master = acpi_spi_find_master_by_adev(adev->parent);
+		if (!master)
+			break;
+
+		acpi_register_spi_device(master, adev);
+		put_device(&master->dev);
+		break;
+	case ACPI_RECONFIG_DEVICE_REMOVE:
+		if (!acpi_device_enumerated(adev))
+			break;
+
+		spi = acpi_spi_find_device_by_adev(adev);
+		if (!spi)
+			break;
+
+		spi_unregister_device(spi);
+		put_device(&spi->dev);
+		break;
+	}
+
+	return NOTIFY_OK;
+}
+
+static struct notifier_block spi_acpi_notifier = {
+	.notifier_call = acpi_spi_notify,
+};
+#else
+extern struct notifier_block spi_acpi_notifier;
+#endif
+
 static int __init spi_init(void)
 {
 	int	status;
@@ -3127,6 +3211,8 @@ static int __init spi_init(void)
 
 	if (IS_ENABLED(CONFIG_OF_DYNAMIC))
 		WARN_ON(of_reconfig_notifier_register(&spi_of_notifier));
+	if (IS_ENABLED(CONFIG_ACPI))
+		WARN_ON(acpi_reconfig_notifier_register(&spi_acpi_notifier));
 
 	return 0;
 
-- 
2.7.4

[PATCH v7 6/8] efi: load SSTDs from EFI variables

[Octavian Purdila]

This patch allows SSDTs to be loaded from EFI variables. It works by
specifying the EFI variable name containing the SSDT to be loaded. All
variables with the same name (regardless of the vendor GUID) will be
loaded.

Note that we can't use acpi_install_table and we must rely on the
dynamic ACPI table loading and bus re-scanning mechanisms. That is
because I2C/SPI controllers are initialized earlier then the EFI
subsystems and all I2C/SPI ACPI devices are enumerated when the
I2C/SPI controllers are initialized.

Signed-off-by: Octavian Purdila <octavian.purdila@intel.com>
Reviewed-by: Matt Fleming <matt@codeblueprint.co.uk>
---
 Documentation/acpi/ssdt-overlays.txt | 67 +++++++++++++++++++++++++
 Documentation/kernel-parameters.txt  |  7 +++
 drivers/firmware/efi/efi.c           | 96 ++++++++++++++++++++++++++++++++++++
 3 files changed, 170 insertions(+)

diff --git a/Documentation/acpi/ssdt-overlays.txt b/Documentation/acpi/ssdt-overlays.txt
index 8050259..c4b57ba 100644
--- a/Documentation/acpi/ssdt-overlays.txt
+++ b/Documentation/acpi/ssdt-overlays.txt
@@ -89,3 +89,70 @@ cp ssdt.aml kernel/firmware/acpi
 # on top:
 find kernel | cpio -H newc --create > /boot/instrumented_initrd
 cat /boot/initrd >>/boot/instrumented_initrd
+
+== Loading ACPI SSDTs from EFI variables ==
+
+This is the preferred method, when EFI is supported on the platform, because it
+allows a persistent, OS independent way of storing the user defined SSDTs. There
+is also work underway to implement EFI support for loading user defined SSDTs
+and using this method will make it easier to convert to the EFI loading
+mechanism when that will arrive.
+
+In order to load SSDTs from an EFI variable the efivar_ssdt kernel command line
+parameter can be used. The argument for the option is the variable name to
+use. If there are multiple variables with the same name but with different
+vendor GUIDs, all of them will be loaded.
+
+In order to store the AML code in an EFI variable the efivarfs filesystem can be
+used. It is enabled and mounted by default in /sys/firmware/efi/efivars in all
+recent distribution.
+
+Creating a new file in /sys/firmware/efi/efivars will automatically create a new
+EFI variable. Updating a file in /sys/firmware/efi/efivars will update the EFI
+variable. Please note that the file name needs to be specially formatted as
+"Name-GUID" and that the first 4 bytes in the file (little-endian format)
+represent the attributes of the EFI variable (see EFI_VARIABLE_MASK in
+include/linux/efi.h). Writing to the file must also be done with one write
+operation.
+
+For example, you can use the following bash script to create/update an EFI
+variable with the content from a given file:
+
+#!/bin/sh -e
+
+while ! [ -z "$1" ]; do
+        case "$1" in
+        "-f") filename="$2"; shift;;
+        "-g") guid="$2"; shift;;
+        *) name="$1";;
+        esac
+        shift
+done
+
+usage()
+{
+        echo "Syntax: ${0##*/} -f filename [ -g guid ] name"
+        exit 1
+}
+
+[ -n "$name" -a -f "$filename" ] || usage
+
+EFIVARFS="/sys/firmware/efi/efivars"
+
+[ -d "$EFIVARFS" ] || exit 2
+
+if stat -tf $EFIVARFS | grep -q -v de5e81e4; then
+        mount -t efivarfs none $EFIVARFS
+fi
+
+# try to pick up an existing GUID
+[ -n "$guid" ] || guid=$(find "$EFIVARFS" -name "$name-*" | head -n1 | cut -f2- -d-)
+
+# use a randomly generated GUID
+[ -n "$guid" ] || guid="$(cat /proc/sys/kernel/random/uuid)"
+
+# efivarfs expects all of the data in one write
+tmp=$(mktemp)
+/bin/echo -ne "\007\000\000\000" | cat - $filename > $tmp
+dd if=$tmp of="$EFIVARFS/$name-$guid" bs=$(stat -c %s $tmp)
+rm $tmp
diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt
index 82b42c9..bbfb56f 100644
--- a/Documentation/kernel-parameters.txt
+++ b/Documentation/kernel-parameters.txt
@@ -1185,6 +1185,13 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
 			Address Range Mirroring feature even if your box
 			doesn't support it.
 
+	efivar_ssdt=	[EFI; X86] Name of an EFI variable that contains an SSDT
+			that is to be dynamically loaded by Linux. If there are
+			multiple variables with the same name but with different
+			vendor GUIDs, all of them will be loaded. See
+			Documentation/acpi/ssdt-overlays.txt for details.
+
+
 	eisa_irq_edge=	[PARISC,HW]
 			See header of drivers/parisc/eisa.c.
 
diff --git a/drivers/firmware/efi/efi.c b/drivers/firmware/efi/efi.c
index 05509f3..8730fd4 100644
--- a/drivers/firmware/efi/efi.c
+++ b/drivers/firmware/efi/efi.c
@@ -24,6 +24,9 @@
 #include <linux/of_fdt.h>
 #include <linux/io.h>
 #include <linux/platform_device.h>
+#include <linux/slab.h>
+#include <linux/acpi.h>
+#include <linux/ucs2_string.h>
 
 #include <asm/early_ioremap.h>
 
@@ -195,6 +198,96 @@ static void generic_ops_unregister(void)
 	efivars_unregister(&generic_efivars);
 }
 
+#if IS_ENABLED(CONFIG_ACPI)
+#define EFIVAR_SSDT_NAME_MAX	16
+static char efivar_ssdt[EFIVAR_SSDT_NAME_MAX] __initdata;
+static int __init efivar_ssdt_setup(char *str)
+{
+	if (strlen(str) < sizeof(efivar_ssdt))
+		memcpy(efivar_ssdt, str, strlen(str));
+	else
+		pr_warn("efivar_ssdt: name too long: %s\n", str);
+	return 0;
+}
+__setup("efivar_ssdt=", efivar_ssdt_setup);
+
+static __init int efivar_ssdt_iter(efi_char16_t *name, efi_guid_t vendor,
+				   unsigned long name_size, void *data)
+{
+	struct efivar_entry *entry;
+	struct list_head *list = data;
+	char utf8_name[EFIVAR_SSDT_NAME_MAX];
+	int limit = min_t(unsigned long, EFIVAR_SSDT_NAME_MAX, name_size);
+
+	ucs2_as_utf8(utf8_name, name, limit - 1);
+	if (strncmp(utf8_name, efivar_ssdt, limit) != 0)
+		return 0;
+
+	entry = kmalloc(sizeof(*entry), GFP_KERNEL);
+	if (!entry)
+		return 0;
+
+	memcpy(entry->var.VariableName, name, name_size);
+	memcpy(&entry->var.VendorGuid, &vendor, sizeof(efi_guid_t));
+
+	efivar_entry_add(entry, list);
+
+	return 0;
+}
+
+static __init int efivar_ssdt_load(void)
+{
+	LIST_HEAD(entries);
+	struct efivar_entry *entry, *aux;
+	unsigned long size;
+	void *data;
+	int ret;
+
+	ret = efivar_init(efivar_ssdt_iter, &entries, true, &entries);
+
+	list_for_each_entry_safe(entry, aux, &entries, list) {
+		pr_info("loading SSDT from variable %s-%pUl\n", efivar_ssdt,
+			&entry->var.VendorGuid);
+
+		list_del(&entry->list);
+
+		ret = efivar_entry_size(entry, &size);
+		if (ret) {
+			pr_err("failed to get var size\n");
+			goto free_entry;
+		}
+
+		data = kmalloc(size, GFP_KERNEL);
+		if (!data)
+			goto free_entry;
+
+		ret = efivar_entry_get(entry, NULL, &size, data);
+		if (ret) {
+			pr_err("failed to get var data\n");
+			goto free_data;
+		}
+
+		ret = acpi_load_table(data);
+		if (ret) {
+			pr_err("failed to load table: %d\n", ret);
+			goto free_data;
+		}
+
+		goto free_entry;
+
+free_data:
+		kfree(data);
+
+free_entry:
+		kfree(entry);
+	}
+
+	return ret;
+}
+#else
+static inline int efivar_ssdt_load(void) { return 0; }
+#endif
+
 /*
  * We register the efi subsystem with the firmware subsystem and the
  * efivars subsystem with the efi subsystem, if the system was booted with
@@ -218,6 +311,9 @@ static int __init efisubsys_init(void)
 	if (error)
 		goto err_put;
 
+	if (efi_enabled(EFI_RUNTIME_SERVICES))
+		efivar_ssdt_load();
+
 	error = sysfs_create_group(efi_kobj, &efi_subsys_attr_group);
 	if (error) {
 		pr_err("efi: Sysfs attribute export failed with error %d.\n",
-- 
2.7.4

[PATCH v7 7/8] acpi: add support for configfs

[Octavian Purdila]

Register the ACPI subsystem with configfs.

Signed-off-by: Octavian Purdila <octavian.purdila@intel.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
---
 Documentation/ABI/testing/configfs-acpi |  7 +++++
 MAINTAINERS                             |  1 +
 drivers/acpi/Kconfig                    |  8 +++++
 drivers/acpi/Makefile                   |  1 +
 drivers/acpi/configfs.c                 | 53 +++++++++++++++++++++++++++++++++
 5 files changed, 70 insertions(+)
 create mode 100644 Documentation/ABI/testing/configfs-acpi
 create mode 100644 drivers/acpi/configfs.c

diff --git a/Documentation/ABI/testing/configfs-acpi b/Documentation/ABI/testing/configfs-acpi
new file mode 100644
index 0000000..17b19dc
--- /dev/null
+++ b/Documentation/ABI/testing/configfs-acpi
@@ -0,0 +1,7 @@
+What:		/config/acpi
+Date:		July 2016
+KernelVersion:	4.8
+Contact:	linux-acpi@vger.kernel.org
+Description:
+		This represents the ACPI subsystem entry point directory. It
+		contains sub-groups corresponding to ACPI configurable options.
diff --git a/MAINTAINERS b/MAINTAINERS
index 16700e4..9c5365f 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -288,6 +288,7 @@ F:	include/linux/acpi.h
 F:	include/acpi/
 F:	Documentation/acpi/
 F:	Documentation/ABI/testing/sysfs-bus-acpi
+F:	Documentation/ABI/testing/configfs-acpi
 F:	drivers/pci/*acpi*
 F:	drivers/pci/*/*acpi*
 F:	drivers/pci/*/*/*acpi*
diff --git a/drivers/acpi/Kconfig b/drivers/acpi/Kconfig
index b7e2e77..ec716bf 100644
--- a/drivers/acpi/Kconfig
+++ b/drivers/acpi/Kconfig
@@ -521,4 +521,12 @@ config XPOWER_PMIC_OPREGION
 
 endif
 
+config ACPI_CONFIGFS
+	tristate "ACPI configfs support"
+	select CONFIGFS_FS
+	help
+	  Select this option to enable support for ACPI configuration from
+	  userspace. The configurable ACPI groups will be visible under
+	  /config/acpi, assuming configfs is mounted under /config.
+
 endif	# ACPI
diff --git a/drivers/acpi/Makefile b/drivers/acpi/Makefile
index 251ce85..1dc2173 100644
--- a/drivers/acpi/Makefile
+++ b/drivers/acpi/Makefile
@@ -99,5 +99,6 @@ obj-$(CONFIG_ACPI_EXTLOG)	+= acpi_extlog.o
 obj-$(CONFIG_PMIC_OPREGION)	+= pmic/intel_pmic.o
 obj-$(CONFIG_CRC_PMIC_OPREGION) += pmic/intel_pmic_crc.o
 obj-$(CONFIG_XPOWER_PMIC_OPREGION) += pmic/intel_pmic_xpower.o
+obj-$(CONFIG_ACPI_CONFIGFS)	+= configfs.o
 
 video-objs			+= acpi_video.o video_detect.o
diff --git a/drivers/acpi/configfs.c b/drivers/acpi/configfs.c
new file mode 100644
index 0000000..44b463f
--- /dev/null
+++ b/drivers/acpi/configfs.c
@@ -0,0 +1,53 @@
+/*
+ * ACPI configfs support
+ *
+ * Copyright (c) 2016 Intel Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ */
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/configfs.h>
+#include <linux/acpi.h>
+
+static struct config_item_type acpi_root_group_type = {
+	.ct_owner = THIS_MODULE,
+};
+
+static struct configfs_subsystem acpi_configfs = {
+	.su_group = {
+		.cg_item = {
+			.ci_namebuf = "acpi",
+			.ci_type = &acpi_root_group_type,
+		},
+	},
+	.su_mutex = __MUTEX_INITIALIZER(acpi_configfs.su_mutex),
+};
+
+static int __init acpi_configfs_init(void)
+{
+	int ret;
+	struct config_group *root = &acpi_configfs.su_group;
+
+	config_group_init(root);
+
+	ret = configfs_register_subsystem(&acpi_configfs);
+	if (ret)
+		return ret;
+
+	return 0;
+}
+module_init(acpi_configfs_init);
+
+static void __exit acpi_configfs_exit(void)
+{
+	configfs_unregister_subsystem(&acpi_configfs);
+}
+module_exit(acpi_configfs_exit);
+
+MODULE_AUTHOR("Octavian Purdila <octavian.purdila@intel.com>");
+MODULE_DESCRIPTION("ACPI configfs support");
+MODULE_LICENSE("GPL v2");
-- 
2.7.4

[PATCH v7 8/8] acpi: add support for loading SSDTs via configfs

[Octavian Purdila]

New tables can be loaded by creating directories under /config/table/
and writing the AML code into the aml table attribute. Various table
attributes will be readable once the table is successfully loaded.

Unloading tables is not supported at the moment, but it can be easily
implemented once ACPI loading functions provide a table handle to be
used for unloading.

Signed-off-by: Octavian Purdila <octavian.purdila@intel.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
---
 Documentation/ABI/testing/configfs-acpi |  29 +++++
 Documentation/acpi/ssdt-overlays.txt    |  14 +++
 drivers/acpi/configfs.c                 | 216 +++++++++++++++++++++++++++++++-
 3 files changed, 258 insertions(+), 1 deletion(-)

diff --git a/Documentation/ABI/testing/configfs-acpi b/Documentation/ABI/testing/configfs-acpi
index 17b19dc..4ab4e99 100644
--- a/Documentation/ABI/testing/configfs-acpi
+++ b/Documentation/ABI/testing/configfs-acpi
@@ -5,3 +5,32 @@ Contact:	linux-acpi@vger.kernel.org
 Description:
 		This represents the ACPI subsystem entry point directory. It
 		contains sub-groups corresponding to ACPI configurable options.
+
+What:		/config/acpi/table
+Date:		July 2016
+KernelVersion:	4.8
+Description:
+
+		This group contains the configuration for user defined ACPI
+		tables. The attributes of a user define table are:
+
+		aml 		- a binary attribute that the user can use to
+				fill in the ACPI aml definitions. Once the aml
+				data is written to this file and the file is
+				closed the table will be loaded and ACPI devices
+				will be enumerated. To check if the operation is
+				successful the user must check the error code
+				for close(). If the operation is successful,
+				subsequent writes to this attribute will fail.
+
+		The rest of the attributes are read-only and are valid only
+		after the table has been loaded by filling the aml entry:
+
+		signature 	- ASCII table signature
+		length 		- length of table in bytes, including the header
+		revision 	- ACPI Specification minor version number
+		oem_id 		- ASCII OEM identification
+		oem_table_id 	- ASCII OEM table identification
+		oem_revision 	- OEM revision number
+		asl_compiler_id - ASCII ASL compiler vendor ID
+		asl_compiler_revision - ASL compiler version
diff --git a/Documentation/acpi/ssdt-overlays.txt b/Documentation/acpi/ssdt-overlays.txt
index c4b57ba..5ae13f1 100644
--- a/Documentation/acpi/ssdt-overlays.txt
+++ b/Documentation/acpi/ssdt-overlays.txt
@@ -156,3 +156,17 @@ tmp=$(mktemp)
 /bin/echo -ne "\007\000\000\000" | cat - $filename > $tmp
 dd if=$tmp of="$EFIVARFS/$name-$guid" bs=$(stat -c %s $tmp)
 rm $tmp
+
+== Loading ACPI SSDTs from configfs ==
+
+This option allows loading of user defined SSDTs from userspace via the configfs
+interface. The CONFIG_ACPI_CONFIGFS option must be select and configfs must be
+mounted. In the following examples, we assume that configfs has been mounted in
+/config.
+
+New tables can be loading by creating new directories in /config/acpi/table/ and
+writing the SSDT aml code in the aml attribute:
+
+cd /config/acpi/table
+mkdir my_ssdt
+cat ~/ssdt.aml > my_ssdt/aml
diff --git a/drivers/acpi/configfs.c b/drivers/acpi/configfs.c
index 44b463f..146a77fb 100644
--- a/drivers/acpi/configfs.c
+++ b/drivers/acpi/configfs.c
@@ -8,11 +8,222 @@
  * the Free Software Foundation.
  */
 
+#define pr_fmt(fmt) "ACPI configfs: " fmt
+
 #include <linux/init.h>
 #include <linux/module.h>
 #include <linux/configfs.h>
 #include <linux/acpi.h>
 
+static struct config_group *acpi_table_group;
+
+struct acpi_table {
+	struct config_item cfg;
+	struct acpi_table_header *header;
+};
+
+static ssize_t acpi_table_aml_write(struct config_item *cfg,
+				    const void *data, size_t size)
+{
+	const struct acpi_table_header *header = data;
+	struct acpi_table *table;
+	int ret;
+
+	table = container_of(cfg, struct acpi_table, cfg);
+
+	if (table->header) {
+		pr_err("table already loaded\n");
+		return -EBUSY;
+	}
+
+	if (header->length != size) {
+		pr_err("invalid table length\n");
+		return -EINVAL;
+	}
+
+	if (memcmp(header->signature, ACPI_SIG_SSDT, 4)) {
+		pr_err("invalid table signature\n");
+		return -EINVAL;
+	}
+
+	table = container_of(cfg, struct acpi_table, cfg);
+
+	table->header = kmemdup(header, header->length, GFP_KERNEL);
+	if (!table->header)
+		return -ENOMEM;
+
+	ret = acpi_load_table(table->header);
+	if (ret) {
+		kfree(table->header);
+		table->header = NULL;
+	}
+
+	return ret;
+}
+
+static inline struct acpi_table_header *get_header(struct config_item *cfg)
+{
+	struct acpi_table *table = container_of(cfg, struct acpi_table, cfg);
+
+	if (!table->header)
+		pr_err("table not loaded\n");
+
+	return table->header;
+}
+
+static ssize_t acpi_table_aml_read(struct config_item *cfg,
+				   void *data, size_t size)
+{
+	struct acpi_table_header *h = get_header(cfg);
+
+	if (!h)
+		return -EINVAL;
+
+	if (data)
+		memcpy(data, h, h->length);
+
+	return h->length;
+}
+
+#define MAX_ACPI_TABLE_SIZE (128 * 1024)
+
+CONFIGFS_BIN_ATTR(acpi_table_, aml, NULL, MAX_ACPI_TABLE_SIZE);
+
+struct configfs_bin_attribute *acpi_table_bin_attrs[] = {
+	&acpi_table_attr_aml,
+	NULL,
+};
+
+ssize_t acpi_table_signature_show(struct config_item *cfg, char *str)
+{
+	struct acpi_table_header *h = get_header(cfg);
+
+	if (!h)
+		return -EINVAL;
+
+	return sprintf(str, "%.*s\n", ACPI_NAME_SIZE, h->signature);
+}
+
+ssize_t acpi_table_length_show(struct config_item *cfg, char *str)
+{
+	struct acpi_table_header *h = get_header(cfg);
+
+	if (!h)
+		return -EINVAL;
+
+	return sprintf(str, "%d\n", h->length);
+}
+
+ssize_t acpi_table_revision_show(struct config_item *cfg, char *str)
+{
+	struct acpi_table_header *h = get_header(cfg);
+
+	if (!h)
+		return -EINVAL;
+
+	return sprintf(str, "%d\n", h->revision);
+}
+
+ssize_t acpi_table_oem_id_show(struct config_item *cfg, char *str)
+{
+	struct acpi_table_header *h = get_header(cfg);
+
+	if (!h)
+		return -EINVAL;
+
+	return sprintf(str, "%.*s\n", ACPI_OEM_ID_SIZE, h->oem_id);
+}
+
+ssize_t acpi_table_oem_table_id_show(struct config_item *cfg, char *str)
+{
+	struct acpi_table_header *h = get_header(cfg);
+
+	if (!h)
+		return -EINVAL;
+
+	return sprintf(str, "%.*s\n", ACPI_OEM_TABLE_ID_SIZE, h->oem_table_id);
+}
+
+ssize_t acpi_table_oem_revision_show(struct config_item *cfg, char *str)
+{
+	struct acpi_table_header *h = get_header(cfg);
+
+	if (!h)
+		return -EINVAL;
+
+	return sprintf(str, "%d\n", h->oem_revision);
+}
+
+ssize_t acpi_table_asl_compiler_id_show(struct config_item *cfg, char *str)
+{
+	struct acpi_table_header *h = get_header(cfg);
+
+	if (!h)
+		return -EINVAL;
+
+	return sprintf(str, "%.*s\n", ACPI_NAME_SIZE, h->asl_compiler_id);
+}
+
+ssize_t acpi_table_asl_compiler_revision_show(struct config_item *cfg,
+					      char *str)
+{
+	struct acpi_table_header *h = get_header(cfg);
+
+	if (!h)
+		return -EINVAL;
+
+	return sprintf(str, "%d\n", h->asl_compiler_revision);
+}
+
+CONFIGFS_ATTR_RO(acpi_table_, signature);
+CONFIGFS_ATTR_RO(acpi_table_, length);
+CONFIGFS_ATTR_RO(acpi_table_, revision);
+CONFIGFS_ATTR_RO(acpi_table_, oem_id);
+CONFIGFS_ATTR_RO(acpi_table_, oem_table_id);
+CONFIGFS_ATTR_RO(acpi_table_, oem_revision);
+CONFIGFS_ATTR_RO(acpi_table_, asl_compiler_id);
+CONFIGFS_ATTR_RO(acpi_table_, asl_compiler_revision);
+
+struct configfs_attribute *acpi_table_attrs[] = {
+	&acpi_table_attr_signature,
+	&acpi_table_attr_length,
+	&acpi_table_attr_revision,
+	&acpi_table_attr_oem_id,
+	&acpi_table_attr_oem_table_id,
+	&acpi_table_attr_oem_revision,
+	&acpi_table_attr_asl_compiler_id,
+	&acpi_table_attr_asl_compiler_revision,
+	NULL,
+};
+
+static struct config_item_type acpi_table_type = {
+	.ct_owner = THIS_MODULE,
+	.ct_bin_attrs = acpi_table_bin_attrs,
+	.ct_attrs = acpi_table_attrs,
+};
+
+static struct config_item *acpi_table_make_item(struct config_group *group,
+						const char *name)
+{
+	struct acpi_table *table;
+
+	table = kzalloc(sizeof(*table), GFP_KERNEL);
+	if (!table)
+		return ERR_PTR(-ENOMEM);
+
+	config_item_init_type_name(&table->cfg, name, &acpi_table_type);
+	return &table->cfg;
+}
+
+struct configfs_group_operations acpi_table_group_ops = {
+	.make_item = acpi_table_make_item,
+};
+
+static struct config_item_type acpi_tables_type = {
+	.ct_owner = THIS_MODULE,
+	.ct_group_ops = &acpi_table_group_ops,
+};
+
 static struct config_item_type acpi_root_group_type = {
 	.ct_owner = THIS_MODULE,
 };
@@ -38,12 +249,15 @@ static int __init acpi_configfs_init(void)
 	if (ret)
 		return ret;
 
-	return 0;
+	acpi_table_group = configfs_register_default_group(root, "table",
+							   &acpi_tables_type);
+	return PTR_ERR_OR_ZERO(acpi_table_group);
 }
 module_init(acpi_configfs_init);
 
 static void __exit acpi_configfs_exit(void)
 {
+	configfs_unregister_default_group(acpi_table_group);
 	configfs_unregister_subsystem(&acpi_configfs);
 }
 module_exit(acpi_configfs_exit);
-- 
2.7.4