LKML Archive on lore.kernel.org
 help / color / Atom feed
From: Andrey Pronin <apronin@chromium.org>
To: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Cc: Peter Huewe <peterhuewe@gmx.de>,
	Marcel Selhorst <tpmdd@selhorst.net>,
	Jason Gunthorpe <jgunthorpe@obsidianresearch.com>,
	tpmdd-devel@lists.sourceforge.net, linux-kernel@vger.kernel.org,
	Christophe Ricard <christophe.ricard@gmail.com>,
	dtor@chromium.org, smbarber@chromium.org, dianders@chromium.org,
	Andrey Pronin <apronin@chromium.org>
Subject: [PATCH v3 0/2] tpm: add driver for cr50 on SPI
Date: Wed, 27 Jul 2016 21:25:15 -0700
Message-ID: <1469679917-120240-1-git-send-email-apronin@chromium.org> (raw)
In-Reply-To: <1468549218-19215-1-git-send-email-apronin@chromium.org>
In-Reply-To: <1468549218-19215-1-git-send-email-apronin@chromium.org>

This patchset adds support for H1 Secure Microcontroller running
Cr50 firmware. It implements several functions, including TPM-like
functionality, and communicates over SPI using the FIFO protocol
described in the PTP Spec, section 6.
H1 is a proprietary chip that the Chrome OS team is investigating
for inclusion in future Chromebooks.

Depends on the following patchset:
 - tpm_tis_core: add optional max xfer size check

v2: Removed driver-specific sysfs attributes.
    Compatible id changed to cr50 from cr50_spi.
    Updated descriptions of the supported device/interface.

v3: Fixed potential race-condition with last_access_jiffies.
    Started using tx_buf/rx_buf in cr50_spi_phy to avoid
    potential problems with DMA.
    Removed DT properties for fw timing parameters.
    Fixed style.

Andrey Pronin (2):
  tpm: devicetree: document properties for cr50
  tpm: add driver for cr50 on SPI

 .../devicetree/bindings/security/tpm/cr50_spi.txt  |  21 ++
 drivers/char/tpm/Kconfig                           |   9 +
 drivers/char/tpm/Makefile                          |   1 +
 drivers/char/tpm/cr50_spi.c                        | 350 +++++++++++++++++++++
 4 files changed, 381 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/security/tpm/cr50_spi.txt
 create mode 100644 drivers/char/tpm/cr50_spi.c

-- 
2.6.6

  parent reply index

Thread overview: 43+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-07-15  2:20 [PATCH " Andrey Pronin
2016-07-15  2:20 ` [PATCH 1/2] tpm: devicetree: document properties for cr50 Andrey Pronin
2016-07-15  4:05   ` Guenter Roeck
2016-07-15 17:31     ` Andrey Pronin
2016-07-15 18:28       ` Guenter Roeck
2016-07-17 13:28   ` Rob Herring
2016-07-15  2:20 ` [PATCH 2/2] tpm: add driver for cr50 on SPI Andrey Pronin
2016-07-15  3:32   ` Jason Gunthorpe
2016-07-15  3:44     ` Andrey Pronin
2016-07-19 12:55       ` Jarkko Sakkinen
2016-07-20  0:24         ` Andrey Pronin
2016-07-20 17:03           ` Jason Gunthorpe
2016-07-21 18:10             ` Andrey Pronin
2016-07-21 21:00               ` Jason Gunthorpe
2016-07-15  2:28 ` [PATCH 0/2] " Peter Huewe
2016-07-15  2:50   ` Andrey Pronin
2016-07-15  3:28     ` Jason Gunthorpe
2016-07-15 17:15       ` Andrey Pronin
2016-07-19 12:56 ` Jarkko Sakkinen
2016-07-20  3:41 ` [PATCH v2 " Andrey Pronin
2016-07-20  3:41   ` [PATCH v2 1/2] tpm: devicetree: document properties for cr50 Andrey Pronin
2016-07-20 19:03     ` Rob Herring
2016-07-20 19:49       ` Andrey Pronin
2016-07-20 19:54         ` Jason Gunthorpe
2016-07-27 21:02           ` Andrey Pronin
2016-07-21 21:03         ` Rob Herring
2016-07-27 21:00           ` Andrey Pronin
2016-07-20  3:41   ` [PATCH v2 2/2] tpm: add driver for cr50 on SPI Andrey Pronin
2016-07-25 17:09   ` Aw: [PATCH v2 0/2] " Peter Huewe
2016-07-27 21:12     ` Andrey Pronin
2016-07-28  4:25 ` Andrey Pronin [this message]
2016-07-28  4:25   ` [PATCH v3 1/2] tpm: devicetree: document properties for cr50 Andrey Pronin
2016-07-28  4:25   ` [PATCH v3 2/2] tpm: add driver for cr50 on SPI Andrey Pronin
2016-07-28 23:01     ` Dmitry Torokhov
2016-07-28 23:17       ` Jason Gunthorpe
2016-07-29  3:01         ` Andrey Pronin
2016-07-29  1:55 ` [PATCH v4 0/2] " Andrey Pronin
2016-07-29  1:55   ` [PATCH v4 1/2] tpm: devicetree: document properties for cr50 Andrey Pronin
2016-07-29 17:27     ` Jason Gunthorpe
2016-07-29 21:42       ` Rob Herring
2016-08-09 10:08     ` Jarkko Sakkinen
2016-07-29  1:55   ` [PATCH v4 2/2] tpm: add driver for cr50 on SPI Andrey Pronin
2016-08-09 10:20     ` Jarkko Sakkinen

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1469679917-120240-1-git-send-email-apronin@chromium.org \
    --to=apronin@chromium.org \
    --cc=christophe.ricard@gmail.com \
    --cc=dianders@chromium.org \
    --cc=dtor@chromium.org \
    --cc=jarkko.sakkinen@linux.intel.com \
    --cc=jgunthorpe@obsidianresearch.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=peterhuewe@gmx.de \
    --cc=smbarber@chromium.org \
    --cc=tpmdd-devel@lists.sourceforge.net \
    --cc=tpmdd@selhorst.net \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

LKML Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/lkml/0 lkml/git/0.git
	git clone --mirror https://lore.kernel.org/lkml/1 lkml/git/1.git
	git clone --mirror https://lore.kernel.org/lkml/2 lkml/git/2.git
	git clone --mirror https://lore.kernel.org/lkml/3 lkml/git/3.git
	git clone --mirror https://lore.kernel.org/lkml/4 lkml/git/4.git
	git clone --mirror https://lore.kernel.org/lkml/5 lkml/git/5.git
	git clone --mirror https://lore.kernel.org/lkml/6 lkml/git/6.git
	git clone --mirror https://lore.kernel.org/lkml/7 lkml/git/7.git
	git clone --mirror https://lore.kernel.org/lkml/8 lkml/git/8.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 lkml lkml/ https://lore.kernel.org/lkml \
		linux-kernel@vger.kernel.org
	public-inbox-index lkml

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-kernel


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git