From: Randy Li <ayaka@soulik.info>
To: devicetree@vger.kernel.org
Cc: mark.rutland@arm.com, linux@armlinux.org.uk, kgene@kernel.org,
krzk@kernel.org, linux-arm-kernel@lists.infradead.org,
linux-samsung-soc@vger.kernel.org, linux-kernel@vger.kernel.org,
robh@kernel.org, Randy Li <ayaka@soulik.info>
Subject: [PATCH 4/4] ARM: dts: samsung: add analog audio codec on TOPEET iTop 4412 Elite
Date: Sun, 28 Aug 2016 19:21:09 +0800 [thread overview]
Message-ID: <1472383269-3126-5-git-send-email-ayaka@soulik.info> (raw)
In-Reply-To: <1472383269-3126-1-git-send-email-ayaka@soulik.info>
Enable the WM8960 analog audio codec on TOPEET iTop 4412 Elite board.
Signed-off-by: Randy Li <ayaka@soulik.info>
---
arch/arm/boot/dts/exynos4412-itop-elite.dts | 77 +++++++++++++++++++++++++++++
1 file changed, 77 insertions(+)
diff --git a/arch/arm/boot/dts/exynos4412-itop-elite.dts b/arch/arm/boot/dts/exynos4412-itop-elite.dts
index 2d11b9a..e1cda54 100644
--- a/arch/arm/boot/dts/exynos4412-itop-elite.dts
+++ b/arch/arm/boot/dts/exynos4412-itop-elite.dts
@@ -15,6 +15,7 @@
/dts-v1/;
#include "exynos4412-itop-scp-core.dtsi"
+#include <dt-bindings/sound/samsung-i2s.h>
/ {
model = "TOPEET iTop 4412 Elite board based on Exynos4412";
@@ -75,6 +76,54 @@
gpios = <&gpx2 0 GPIO_ACTIVE_LOW>;
};
};
+
+ sound {
+ compatible = "simple-audio-card";
+ simple-audio-card,name = "wm-sound";
+
+ assigned-clocks = <&clock_audss EXYNOS_MOUT_AUDSS>,
+ <&clock_audss EXYNOS_MOUT_I2S>,
+ <&clock_audss EXYNOS_DOUT_SRP>,
+ <&clock_audss EXYNOS_DOUT_AUD_BUS>;
+ assigned-clock-parents = <&clock CLK_FOUT_EPLL>,
+ <&clock_audss EXYNOS_MOUT_AUDSS>;
+ assigned-clock-rates = <0>,
+ <0>,
+ <112896000>,
+ <11289600>;
+
+ simple-audio-card,format = "i2s";
+ simple-audio-card,bitclock-master = <&link0_codec>;
+ simple-audio-card,frame-master = <&link0_codec>;
+
+ simple-audio-card,widgets =
+ "Microphone", "Mic Jack",
+ "Line", "Line In",
+ "Line", "Line Out",
+ "Speaker", "Speaker",
+ "Headphone", "Headphone Jack";
+ simple-audio-card,routing =
+ "Headphone Jack", "HP_L",
+ "Headphone Jack", "HP_R",
+ "Speaker", "SPK_LP",
+ "Speaker", "SPK_LN",
+ "Speaker", "SPK_RP",
+ "Speaker", "SPK_RN",
+ "LINPUT1", "Mic Jack",
+ "LINPUT3", "Mic Jack",
+ "RINPUT1", "Mic Jack",
+ "RINPUT2", "Mic Jack";
+
+ simple-audio-card,cpu {
+ sound-dai = <&i2s0 0>;
+ };
+
+ link0_codec: simple-audio-card,codec {
+ sound-dai = <&codec>;
+ clocks = <&i2s0 CLK_I2S_CDCLK>;
+ system-clock-frequency = <11289600>;
+ };
+ };
beep {
compatible = "pwm-beeper";
@@ -143,6 +192,34 @@
status = "okay";
};
+&i2c_4 {
+ samsung,i2c-sda-delay = <100>;
+ samsung,i2c-slave-addr = <0x10>;
+ samsung,i2c-max-bus-freq = <100000>;
+ pinctrl-0 = <&i2c4_bus>;
+ pinctrl-names = "default";
+ status = "okay";
+
+ codec: wm8960@1a {
+ compatible = "wlf,wm8960";
+ reg = <0x1a>;
+ clocks = <&pmu_system_controller 0>;
+ clock-names = "MCLK1";
+ wlf,shared-lrclk;
+ #sound-dai-cells = <0>;
+ };
+};
+
+&i2s0 {
+ pinctrl-0 = <&i2s0_bus>;
+ pinctrl-names = "default";
+ status = "okay";
+ clocks = <&clock_audss EXYNOS_I2S_BUS>,
+ <&clock_audss EXYNOS_DOUT_AUD_BUS>,
+ <&clock_audss EXYNOS_SCLK_I2S>;
+ clock-names = "iis", "i2s_opclk0", "i2s_opclk1";
+};
+
&pwm {
pinctrl-0 = <&pwm1_out>;
pinctrl-names = "default";
--
2.7.4
next prev parent reply other threads:[~2016-08-28 11:22 UTC|newest]
Thread overview: 35+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-08-21 20:04 [PATCH 0/2] Add a new board for exynos 4412 Randy Li
2016-08-21 20:04 ` [PATCH 1/2] ARM: dts: Add TOPEET itop core board SCP package version Randy Li
2016-08-22 6:50 ` Marek Szyprowski
2016-08-22 8:28 ` Ayaka
2016-08-22 14:45 ` Chanwoo Choi
2016-08-22 14:49 ` ayaka
2016-08-22 14:18 ` [PATCH 0/2 v2] Add a new board TOPEET iTOP for exynos 4412 Randy Li
2016-08-22 14:18 ` [PATCH 1/2] ARM: dts: Add TOPEET itop core board SCP package version Randy Li
2016-08-22 14:18 ` [PATCH 2/2] ARM: dts: add TOPEET itop elite based board Randy Li
2016-08-22 18:59 ` kbuild test robot
2016-08-23 18:14 ` Rob Herring
2016-08-23 18:36 ` ayaka
2016-08-23 22:38 ` Rob Herring
2016-08-24 8:29 ` Ayaka
2016-08-28 11:21 ` [PATCH 0/4 v3] Add a new board TOPEET iTOP for exynos 4412 Randy Li
2016-08-28 11:21 ` [PATCH 1/4] ARM: dts: Add TOPEET itop core board SCP package version Randy Li
2016-08-28 21:13 ` Rask Ingemann Lambertsen
2016-08-30 7:16 ` Krzysztof Kozlowski
2016-08-31 12:58 ` [RESEND PATCH 1/3] " Randy Li
2016-08-31 18:42 ` Krzysztof Kozlowski
2016-08-31 19:49 ` Ayaka
2016-09-01 13:03 ` Bartlomiej Zolnierkiewicz
2016-09-01 16:12 ` Krzysztof Kozlowski
2016-08-28 11:21 ` [PATCH 2/4] ARM: dts: add TOPEET itop elite based board Randy Li
2016-08-30 7:32 ` Krzysztof Kozlowski
2016-08-31 12:59 ` [RESEND PATCH 2/3] " Randy Li
2016-09-01 13:07 ` Bartlomiej Zolnierkiewicz
2016-08-28 11:21 ` [PATCH 3/4] ARM: dts: add fimc support in exynos4412 TOPEET iTop Elite board Randy Li
2016-08-30 7:33 ` Krzysztof Kozlowski
2016-08-31 13:00 ` [PATCH 3/3 v3] devicetree: bindings: Add vendor prefix for Topeet Randy Li
2016-08-28 11:21 ` Randy Li [this message]
2016-08-30 7:35 ` [PATCH 4/4] ARM: dts: samsung: add analog audio codec on TOPEET iTop 4412 Elite Krzysztof Kozlowski
2016-08-30 7:04 ` [PATCH 0/4 v3] Add a new board TOPEET iTOP for exynos 4412 Krzysztof Kozlowski
2016-08-21 20:04 ` [PATCH 2/2] ARM: dts: add TOPEET itop elite based board Randy Li
2016-08-21 20:12 ` [PATCH 2/2 v2] " Randy Li
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1472383269-3126-5-git-send-email-ayaka@soulik.info \
--to=ayaka@soulik.info \
--cc=devicetree@vger.kernel.org \
--cc=kgene@kernel.org \
--cc=krzk@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-samsung-soc@vger.kernel.org \
--cc=linux@armlinux.org.uk \
--cc=mark.rutland@arm.com \
--cc=robh@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).