* [PATCH v2 01/10] reset: ath79: add driver Kconfig option
@ 2016-08-30 8:24 Philipp Zabel
2016-08-30 8:24 ` [PATCH v2 02/10] reset: berlin: " Philipp Zabel
` (8 more replies)
0 siblings, 9 replies; 14+ messages in thread
From: Philipp Zabel @ 2016-08-30 8:24 UTC (permalink / raw)
To: linux-kernel
Cc: Masahiro Yamada, Arnd Bergmann, Axel Lin, Hans de Goede,
Maxime Ripard, Lee Jones, linux-arm-kernel, Philipp Zabel
Visible only if COMPILE_TEST is enabled, this allows to include the
driver in build tests.
Acked-by: Aban Bedel <albeu@free.fr>
Reviewed-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
---
drivers/reset/Kconfig | 7 +++++++
drivers/reset/Makefile | 2 +-
2 files changed, 8 insertions(+), 1 deletion(-)
diff --git a/drivers/reset/Kconfig b/drivers/reset/Kconfig
index 7dfe8d8..9da0507 100644
--- a/drivers/reset/Kconfig
+++ b/drivers/reset/Kconfig
@@ -14,6 +14,13 @@ menuconfig RESET_CONTROLLER
if RESET_CONTROLLER
+config RESET_ATH79
+ bool "AR71xx Reset Driver" if COMPILE_TEST
+ default ATH79
+ help
+ This enables the ATH79 reset controller driver that supports the
+ AR71xx SoC reset controller.
+
config RESET_OXNAS
bool
diff --git a/drivers/reset/Makefile b/drivers/reset/Makefile
index 9b45dcf..e3fc337 100644
--- a/drivers/reset/Makefile
+++ b/drivers/reset/Makefile
@@ -9,7 +9,7 @@ obj-$(CONFIG_ARCH_SUNXI) += reset-sunxi.o
obj-$(CONFIG_ARCH_STI) += sti/
obj-$(CONFIG_ARCH_HISI) += hisilicon/
obj-$(CONFIG_ARCH_ZYNQ) += reset-zynq.o
-obj-$(CONFIG_ATH79) += reset-ath79.o
+obj-$(CONFIG_RESET_ATH79) += reset-ath79.o
obj-$(CONFIG_RESET_OXNAS) += reset-oxnas.o
obj-$(CONFIG_TI_SYSCON_RESET) += reset-ti-syscon.o
obj-$(CONFIG_RESET_UNIPHIER) += reset-uniphier.o
--
2.8.1
^ permalink raw reply related [flat|nested] 14+ messages in thread
* [PATCH v2 02/10] reset: berlin: add driver Kconfig option
2016-08-30 8:24 [PATCH v2 01/10] reset: ath79: add driver Kconfig option Philipp Zabel
@ 2016-08-30 8:24 ` Philipp Zabel
2016-09-28 19:21 ` Sebastian Hesselbarth
2016-08-30 8:24 ` [PATCH v2 03/10] reset: lpc18xx: " Philipp Zabel
` (7 subsequent siblings)
8 siblings, 1 reply; 14+ messages in thread
From: Philipp Zabel @ 2016-08-30 8:24 UTC (permalink / raw)
To: linux-kernel
Cc: Masahiro Yamada, Arnd Bergmann, Axel Lin, Hans de Goede,
Maxime Ripard, Lee Jones, linux-arm-kernel, Philipp Zabel,
Antoine Tenart, Sebastian Hesselbarth
Visible only if COMPILE_TEST is enabled, this allows to include the
driver in build tests.
Cc: Antoine Tenart <antoine.tenart@free-electrons.com>
Cc: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Reviewed-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
---
drivers/reset/Kconfig | 6 ++++++
drivers/reset/Makefile | 2 +-
2 files changed, 7 insertions(+), 1 deletion(-)
diff --git a/drivers/reset/Kconfig b/drivers/reset/Kconfig
index 9da0507..1194cbe 100644
--- a/drivers/reset/Kconfig
+++ b/drivers/reset/Kconfig
@@ -21,6 +21,12 @@ config RESET_ATH79
This enables the ATH79 reset controller driver that supports the
AR71xx SoC reset controller.
+config RESET_BERLIN
+ bool "Berlin Reset Driver" if COMPILE_TEST
+ default ARCH_BERLIN
+ help
+ This enables the reset controller driver for Marvell Berlin SoCs.
+
config RESET_OXNAS
bool
diff --git a/drivers/reset/Makefile b/drivers/reset/Makefile
index e3fc337..34c0b23 100644
--- a/drivers/reset/Makefile
+++ b/drivers/reset/Makefile
@@ -1,7 +1,6 @@
obj-y += core.o
obj-$(CONFIG_ARCH_LPC18XX) += reset-lpc18xx.o
obj-$(CONFIG_ARCH_SOCFPGA) += reset-socfpga.o
-obj-$(CONFIG_ARCH_BERLIN) += reset-berlin.o
obj-$(CONFIG_MACH_PISTACHIO) += reset-pistachio.o
obj-$(CONFIG_ARCH_MESON) += reset-meson.o
obj-$(CONFIG_ARCH_STM32) += reset-stm32.o
@@ -10,6 +9,7 @@ obj-$(CONFIG_ARCH_STI) += sti/
obj-$(CONFIG_ARCH_HISI) += hisilicon/
obj-$(CONFIG_ARCH_ZYNQ) += reset-zynq.o
obj-$(CONFIG_RESET_ATH79) += reset-ath79.o
+obj-$(CONFIG_RESET_BERLIN) += reset-berlin.o
obj-$(CONFIG_RESET_OXNAS) += reset-oxnas.o
obj-$(CONFIG_TI_SYSCON_RESET) += reset-ti-syscon.o
obj-$(CONFIG_RESET_UNIPHIER) += reset-uniphier.o
--
2.8.1
^ permalink raw reply related [flat|nested] 14+ messages in thread
* [PATCH v2 03/10] reset: lpc18xx: add driver Kconfig option
2016-08-30 8:24 [PATCH v2 01/10] reset: ath79: add driver Kconfig option Philipp Zabel
2016-08-30 8:24 ` [PATCH v2 02/10] reset: berlin: " Philipp Zabel
@ 2016-08-30 8:24 ` Philipp Zabel
2016-08-30 8:24 ` [PATCH v2 04/10] reset: meson: " Philipp Zabel
` (6 subsequent siblings)
8 siblings, 0 replies; 14+ messages in thread
From: Philipp Zabel @ 2016-08-30 8:24 UTC (permalink / raw)
To: linux-kernel
Cc: Masahiro Yamada, Arnd Bergmann, Axel Lin, Hans de Goede,
Maxime Ripard, Lee Jones, linux-arm-kernel, Philipp Zabel
Visible only if COMPILE_TEST is enabled, this allows to include the
driver in build tests.
Acked-by: Joachim Eastwood <manabian@gmail.com>
Reviewed-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
---
Changes since v1:
- Fixed Kconfig option help text
---
drivers/reset/Kconfig | 6 ++++++
drivers/reset/Makefile | 2 +-
2 files changed, 7 insertions(+), 1 deletion(-)
diff --git a/drivers/reset/Kconfig b/drivers/reset/Kconfig
index 1194cbe..72c9b78 100644
--- a/drivers/reset/Kconfig
+++ b/drivers/reset/Kconfig
@@ -27,6 +27,12 @@ config RESET_BERLIN
help
This enables the reset controller driver for Marvell Berlin SoCs.
+config RESET_LPC18XX
+ bool "LPC18xx/43xx Reset Driver" if COMPILE_TEST
+ default ARCH_LPC18XX
+ help
+ This enables the reset controller driver for NXP LPC18xx/43xx SoCs.
+
config RESET_OXNAS
bool
diff --git a/drivers/reset/Makefile b/drivers/reset/Makefile
index 34c0b23..25aa05a 100644
--- a/drivers/reset/Makefile
+++ b/drivers/reset/Makefile
@@ -1,5 +1,4 @@
obj-y += core.o
-obj-$(CONFIG_ARCH_LPC18XX) += reset-lpc18xx.o
obj-$(CONFIG_ARCH_SOCFPGA) += reset-socfpga.o
obj-$(CONFIG_MACH_PISTACHIO) += reset-pistachio.o
obj-$(CONFIG_ARCH_MESON) += reset-meson.o
@@ -10,6 +9,7 @@ obj-$(CONFIG_ARCH_HISI) += hisilicon/
obj-$(CONFIG_ARCH_ZYNQ) += reset-zynq.o
obj-$(CONFIG_RESET_ATH79) += reset-ath79.o
obj-$(CONFIG_RESET_BERLIN) += reset-berlin.o
+obj-$(CONFIG_RESET_LPC18XX) += reset-lpc18xx.o
obj-$(CONFIG_RESET_OXNAS) += reset-oxnas.o
obj-$(CONFIG_TI_SYSCON_RESET) += reset-ti-syscon.o
obj-$(CONFIG_RESET_UNIPHIER) += reset-uniphier.o
--
2.8.1
^ permalink raw reply related [flat|nested] 14+ messages in thread
* [PATCH v2 04/10] reset: meson: add driver Kconfig option
2016-08-30 8:24 [PATCH v2 01/10] reset: ath79: add driver Kconfig option Philipp Zabel
2016-08-30 8:24 ` [PATCH v2 02/10] reset: berlin: " Philipp Zabel
2016-08-30 8:24 ` [PATCH v2 03/10] reset: lpc18xx: " Philipp Zabel
@ 2016-08-30 8:24 ` Philipp Zabel
2016-08-30 8:24 ` [PATCH v2 05/10] reset: pistachio: " Philipp Zabel
` (5 subsequent siblings)
8 siblings, 0 replies; 14+ messages in thread
From: Philipp Zabel @ 2016-08-30 8:24 UTC (permalink / raw)
To: linux-kernel
Cc: Masahiro Yamada, Arnd Bergmann, Axel Lin, Hans de Goede,
Maxime Ripard, Lee Jones, linux-arm-kernel, Philipp Zabel
Visible only if COMPILE_TEST is enabled, this allows to include the
driver in build tests.
Acked-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
---
drivers/reset/Kconfig | 6 ++++++
drivers/reset/Makefile | 2 +-
2 files changed, 7 insertions(+), 1 deletion(-)
diff --git a/drivers/reset/Kconfig b/drivers/reset/Kconfig
index 72c9b78..3fa6afe 100644
--- a/drivers/reset/Kconfig
+++ b/drivers/reset/Kconfig
@@ -33,6 +33,12 @@ config RESET_LPC18XX
help
This enables the reset controller driver for NXP LPC18xx/43xx SoCs.
+config RESET_MESON
+ bool "Meson Reset Driver" if COMPILE_TEST
+ default ARCH_MESON
+ help
+ This enables the reset driver for Amlogic Meson SoCs.
+
config RESET_OXNAS
bool
diff --git a/drivers/reset/Makefile b/drivers/reset/Makefile
index 25aa05a..1408cba 100644
--- a/drivers/reset/Makefile
+++ b/drivers/reset/Makefile
@@ -1,7 +1,6 @@
obj-y += core.o
obj-$(CONFIG_ARCH_SOCFPGA) += reset-socfpga.o
obj-$(CONFIG_MACH_PISTACHIO) += reset-pistachio.o
-obj-$(CONFIG_ARCH_MESON) += reset-meson.o
obj-$(CONFIG_ARCH_STM32) += reset-stm32.o
obj-$(CONFIG_ARCH_SUNXI) += reset-sunxi.o
obj-$(CONFIG_ARCH_STI) += sti/
@@ -10,6 +9,7 @@ obj-$(CONFIG_ARCH_ZYNQ) += reset-zynq.o
obj-$(CONFIG_RESET_ATH79) += reset-ath79.o
obj-$(CONFIG_RESET_BERLIN) += reset-berlin.o
obj-$(CONFIG_RESET_LPC18XX) += reset-lpc18xx.o
+obj-$(CONFIG_RESET_MESON) += reset-meson.o
obj-$(CONFIG_RESET_OXNAS) += reset-oxnas.o
obj-$(CONFIG_TI_SYSCON_RESET) += reset-ti-syscon.o
obj-$(CONFIG_RESET_UNIPHIER) += reset-uniphier.o
--
2.8.1
^ permalink raw reply related [flat|nested] 14+ messages in thread
* [PATCH v2 05/10] reset: pistachio: add driver Kconfig option
2016-08-30 8:24 [PATCH v2 01/10] reset: ath79: add driver Kconfig option Philipp Zabel
` (2 preceding siblings ...)
2016-08-30 8:24 ` [PATCH v2 04/10] reset: meson: " Philipp Zabel
@ 2016-08-30 8:24 ` Philipp Zabel
2016-08-30 8:24 ` [PATCH v2 06/10] reset: socfpga: " Philipp Zabel
` (4 subsequent siblings)
8 siblings, 0 replies; 14+ messages in thread
From: Philipp Zabel @ 2016-08-30 8:24 UTC (permalink / raw)
To: linux-kernel
Cc: Masahiro Yamada, Arnd Bergmann, Axel Lin, Hans de Goede,
Maxime Ripard, Lee Jones, linux-arm-kernel, Philipp Zabel,
Damien Horsley
Visible only if COMPILE_TEST is enabled, this allows to include the
driver in build tests.
Cc: Damien Horsley <Damien.Horsley@imgtec.com>
Acked-by: James Hartley <james.hartley@imgtec.com>
Reviewed-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
---
drivers/reset/Kconfig | 6 ++++++
drivers/reset/Makefile | 2 +-
2 files changed, 7 insertions(+), 1 deletion(-)
diff --git a/drivers/reset/Kconfig b/drivers/reset/Kconfig
index 3fa6afe..8bb1d87 100644
--- a/drivers/reset/Kconfig
+++ b/drivers/reset/Kconfig
@@ -42,6 +42,12 @@ config RESET_MESON
config RESET_OXNAS
bool
+config RESET_PISTACHIO
+ bool "Pistachio Reset Driver" if COMPILE_TEST
+ default MACH_PISTACHIO
+ help
+ This enables the reset driver for ImgTec Pistachio SoCs.
+
config TI_SYSCON_RESET
tristate "TI SYSCON Reset Driver"
depends on HAS_IOMEM
diff --git a/drivers/reset/Makefile b/drivers/reset/Makefile
index 1408cba..c796a14 100644
--- a/drivers/reset/Makefile
+++ b/drivers/reset/Makefile
@@ -1,6 +1,5 @@
obj-y += core.o
obj-$(CONFIG_ARCH_SOCFPGA) += reset-socfpga.o
-obj-$(CONFIG_MACH_PISTACHIO) += reset-pistachio.o
obj-$(CONFIG_ARCH_STM32) += reset-stm32.o
obj-$(CONFIG_ARCH_SUNXI) += reset-sunxi.o
obj-$(CONFIG_ARCH_STI) += sti/
@@ -11,5 +10,6 @@ obj-$(CONFIG_RESET_BERLIN) += reset-berlin.o
obj-$(CONFIG_RESET_LPC18XX) += reset-lpc18xx.o
obj-$(CONFIG_RESET_MESON) += reset-meson.o
obj-$(CONFIG_RESET_OXNAS) += reset-oxnas.o
+obj-$(CONFIG_RESET_PISTACHIO) += reset-pistachio.o
obj-$(CONFIG_TI_SYSCON_RESET) += reset-ti-syscon.o
obj-$(CONFIG_RESET_UNIPHIER) += reset-uniphier.o
--
2.8.1
^ permalink raw reply related [flat|nested] 14+ messages in thread
* [PATCH v2 06/10] reset: socfpga: add driver Kconfig option
2016-08-30 8:24 [PATCH v2 01/10] reset: ath79: add driver Kconfig option Philipp Zabel
` (3 preceding siblings ...)
2016-08-30 8:24 ` [PATCH v2 05/10] reset: pistachio: " Philipp Zabel
@ 2016-08-30 8:24 ` Philipp Zabel
2016-08-30 8:24 ` [PATCH v2 07/10] reset: stm32: " Philipp Zabel
` (3 subsequent siblings)
8 siblings, 0 replies; 14+ messages in thread
From: Philipp Zabel @ 2016-08-30 8:24 UTC (permalink / raw)
To: linux-kernel
Cc: Masahiro Yamada, Arnd Bergmann, Axel Lin, Hans de Goede,
Maxime Ripard, Lee Jones, linux-arm-kernel, Philipp Zabel
Visible only if COMPILE_TEST is enabled, this allows to include the
driver in build tests.
Acked-by: Dinh Nguyen <dinguyen@opensource.altera.com>
Reviewed-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
---
Changes since v1:
- Use "SoCFPGA" instead of "Soc FPGA".
---
drivers/reset/Kconfig | 6 ++++++
drivers/reset/Makefile | 2 +-
2 files changed, 7 insertions(+), 1 deletion(-)
diff --git a/drivers/reset/Kconfig b/drivers/reset/Kconfig
index 8bb1d87..fc0947f 100644
--- a/drivers/reset/Kconfig
+++ b/drivers/reset/Kconfig
@@ -48,6 +48,12 @@ config RESET_PISTACHIO
help
This enables the reset driver for ImgTec Pistachio SoCs.
+config RESET_SOCFPGA
+ bool "SoCFPGA Reset Driver" if COMPILE_TEST
+ default ARCH_SOCFPGA
+ help
+ This enables the reset controller driver for Altera SoCFPGAs.
+
config TI_SYSCON_RESET
tristate "TI SYSCON Reset Driver"
depends on HAS_IOMEM
diff --git a/drivers/reset/Makefile b/drivers/reset/Makefile
index c796a14..61e4c64 100644
--- a/drivers/reset/Makefile
+++ b/drivers/reset/Makefile
@@ -1,5 +1,4 @@
obj-y += core.o
-obj-$(CONFIG_ARCH_SOCFPGA) += reset-socfpga.o
obj-$(CONFIG_ARCH_STM32) += reset-stm32.o
obj-$(CONFIG_ARCH_SUNXI) += reset-sunxi.o
obj-$(CONFIG_ARCH_STI) += sti/
@@ -11,5 +10,6 @@ obj-$(CONFIG_RESET_LPC18XX) += reset-lpc18xx.o
obj-$(CONFIG_RESET_MESON) += reset-meson.o
obj-$(CONFIG_RESET_OXNAS) += reset-oxnas.o
obj-$(CONFIG_RESET_PISTACHIO) += reset-pistachio.o
+obj-$(CONFIG_RESET_SOCFPGA) += reset-socfpga.o
obj-$(CONFIG_TI_SYSCON_RESET) += reset-ti-syscon.o
obj-$(CONFIG_RESET_UNIPHIER) += reset-uniphier.o
--
2.8.1
^ permalink raw reply related [flat|nested] 14+ messages in thread
* [PATCH v2 07/10] reset: stm32: add driver Kconfig option
2016-08-30 8:24 [PATCH v2 01/10] reset: ath79: add driver Kconfig option Philipp Zabel
` (4 preceding siblings ...)
2016-08-30 8:24 ` [PATCH v2 06/10] reset: socfpga: " Philipp Zabel
@ 2016-08-30 8:24 ` Philipp Zabel
2016-09-03 10:47 ` Maxime Coquelin
2016-08-30 8:24 ` [PATCH v2 08/10] reset: sunxi: " Philipp Zabel
` (2 subsequent siblings)
8 siblings, 1 reply; 14+ messages in thread
From: Philipp Zabel @ 2016-08-30 8:24 UTC (permalink / raw)
To: linux-kernel
Cc: Masahiro Yamada, Arnd Bergmann, Axel Lin, Hans de Goede,
Maxime Ripard, Lee Jones, linux-arm-kernel, Philipp Zabel,
Maxime Coquelin, Gabriel Fernandez
Visible only if COMPILE_TEST is enabled, this allows to include the
driver in build tests.
Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com>
Cc: Gabriel Fernandez <gabriel.fernandez@st.com>
Reviewed-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
---
drivers/reset/Kconfig | 6 ++++++
drivers/reset/Makefile | 2 +-
2 files changed, 7 insertions(+), 1 deletion(-)
diff --git a/drivers/reset/Kconfig b/drivers/reset/Kconfig
index fc0947f..afcbb99 100644
--- a/drivers/reset/Kconfig
+++ b/drivers/reset/Kconfig
@@ -54,6 +54,12 @@ config RESET_SOCFPGA
help
This enables the reset controller driver for Altera SoCFPGAs.
+config RESET_STM32
+ bool "STM32 Reset Driver" if COMPILE_TEST
+ default ARCH_STM32
+ help
+ This enables the RCC reset controller driver for STM32 MCUs.
+
config TI_SYSCON_RESET
tristate "TI SYSCON Reset Driver"
depends on HAS_IOMEM
diff --git a/drivers/reset/Makefile b/drivers/reset/Makefile
index 61e4c64..6276f82 100644
--- a/drivers/reset/Makefile
+++ b/drivers/reset/Makefile
@@ -1,5 +1,4 @@
obj-y += core.o
-obj-$(CONFIG_ARCH_STM32) += reset-stm32.o
obj-$(CONFIG_ARCH_SUNXI) += reset-sunxi.o
obj-$(CONFIG_ARCH_STI) += sti/
obj-$(CONFIG_ARCH_HISI) += hisilicon/
@@ -11,5 +10,6 @@ obj-$(CONFIG_RESET_MESON) += reset-meson.o
obj-$(CONFIG_RESET_OXNAS) += reset-oxnas.o
obj-$(CONFIG_RESET_PISTACHIO) += reset-pistachio.o
obj-$(CONFIG_RESET_SOCFPGA) += reset-socfpga.o
+obj-$(CONFIG_RESET_STM32) += reset-stm32.o
obj-$(CONFIG_TI_SYSCON_RESET) += reset-ti-syscon.o
obj-$(CONFIG_RESET_UNIPHIER) += reset-uniphier.o
--
2.8.1
^ permalink raw reply related [flat|nested] 14+ messages in thread
* [PATCH v2 08/10] reset: sunxi: add driver Kconfig option
2016-08-30 8:24 [PATCH v2 01/10] reset: ath79: add driver Kconfig option Philipp Zabel
` (5 preceding siblings ...)
2016-08-30 8:24 ` [PATCH v2 07/10] reset: stm32: " Philipp Zabel
@ 2016-08-30 8:24 ` Philipp Zabel
2016-08-30 8:24 ` [PATCH v2 09/10] reset: zynq: " Philipp Zabel
2016-08-30 8:24 ` [PATCH v2 10/10] reset: hi6220: allow to compile test driver on other architectures Philipp Zabel
8 siblings, 0 replies; 14+ messages in thread
From: Philipp Zabel @ 2016-08-30 8:24 UTC (permalink / raw)
To: linux-kernel
Cc: Masahiro Yamada, Arnd Bergmann, Axel Lin, Hans de Goede,
Maxime Ripard, Lee Jones, linux-arm-kernel, Philipp Zabel
Visible only if COMPILE_TEST is enabled, this allows to include the
driver in build tests.
Reviewed-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
---
Changes since v1:
- Force-enable RESET_SUNXI if ARCH_SUNXI is enabled, since the platform
code calls our init functions.
---
drivers/reset/Kconfig | 6 ++++++
drivers/reset/Makefile | 2 +-
2 files changed, 7 insertions(+), 1 deletion(-)
diff --git a/drivers/reset/Kconfig b/drivers/reset/Kconfig
index afcbb99..7f748af 100644
--- a/drivers/reset/Kconfig
+++ b/drivers/reset/Kconfig
@@ -60,6 +60,12 @@ config RESET_STM32
help
This enables the RCC reset controller driver for STM32 MCUs.
+config RESET_SUNXI
+ bool "Allwinner SoCs Reset Driver" if COMPILE_TEST && !ARCH_SUNXI
+ default ARCH_SUNXI
+ help
+ This enables the reset driver for Allwinner SoCs.
+
config TI_SYSCON_RESET
tristate "TI SYSCON Reset Driver"
depends on HAS_IOMEM
diff --git a/drivers/reset/Makefile b/drivers/reset/Makefile
index 6276f82..4a163c7 100644
--- a/drivers/reset/Makefile
+++ b/drivers/reset/Makefile
@@ -1,5 +1,4 @@
obj-y += core.o
-obj-$(CONFIG_ARCH_SUNXI) += reset-sunxi.o
obj-$(CONFIG_ARCH_STI) += sti/
obj-$(CONFIG_ARCH_HISI) += hisilicon/
obj-$(CONFIG_ARCH_ZYNQ) += reset-zynq.o
@@ -11,5 +10,6 @@ obj-$(CONFIG_RESET_OXNAS) += reset-oxnas.o
obj-$(CONFIG_RESET_PISTACHIO) += reset-pistachio.o
obj-$(CONFIG_RESET_SOCFPGA) += reset-socfpga.o
obj-$(CONFIG_RESET_STM32) += reset-stm32.o
+obj-$(CONFIG_RESET_SUNXI) += reset-sunxi.o
obj-$(CONFIG_TI_SYSCON_RESET) += reset-ti-syscon.o
obj-$(CONFIG_RESET_UNIPHIER) += reset-uniphier.o
--
2.8.1
^ permalink raw reply related [flat|nested] 14+ messages in thread
* [PATCH v2 09/10] reset: zynq: add driver Kconfig option
2016-08-30 8:24 [PATCH v2 01/10] reset: ath79: add driver Kconfig option Philipp Zabel
` (6 preceding siblings ...)
2016-08-30 8:24 ` [PATCH v2 08/10] reset: sunxi: " Philipp Zabel
@ 2016-08-30 8:24 ` Philipp Zabel
2016-08-30 10:01 ` Michal Simek
2016-08-30 8:24 ` [PATCH v2 10/10] reset: hi6220: allow to compile test driver on other architectures Philipp Zabel
8 siblings, 1 reply; 14+ messages in thread
From: Philipp Zabel @ 2016-08-30 8:24 UTC (permalink / raw)
To: linux-kernel
Cc: Masahiro Yamada, Arnd Bergmann, Axel Lin, Hans de Goede,
Maxime Ripard, Lee Jones, linux-arm-kernel, Philipp Zabel,
Moritz Fischer, Michal Simek, Sören Brinkmann
Visible only if COMPILE_TEST is enabled, this allows to include the
driver in build tests.
Cc: Moritz Fischer <moritz.fischer@ettus.com>
Cc: Michal Simek <michal.simek@xilinx.com>
Cc: Sören Brinkmann <soren.brinkmann@xilinx.com>
Reviewed-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
---
Changes since v1:
- Fix alphabetical order of Kconfig options
---
drivers/reset/Kconfig | 6 ++++++
drivers/reset/Makefile | 2 +-
2 files changed, 7 insertions(+), 1 deletion(-)
diff --git a/drivers/reset/Kconfig b/drivers/reset/Kconfig
index 7f748af..06d9fa2 100644
--- a/drivers/reset/Kconfig
+++ b/drivers/reset/Kconfig
@@ -86,6 +86,12 @@ config RESET_UNIPHIER
Say Y if you want to control reset signals provided by System Control
block, Media I/O block, Peripheral Block.
+config RESET_ZYNQ
+ bool "ZYNQ Reset Driver" if COMPILE_TEST
+ default ARCH_ZYNQ
+ help
+ This enables the reset controller driver for Xilinx Zynq SoCs.
+
source "drivers/reset/sti/Kconfig"
source "drivers/reset/hisilicon/Kconfig"
diff --git a/drivers/reset/Makefile b/drivers/reset/Makefile
index 4a163c7..56f90ea 100644
--- a/drivers/reset/Makefile
+++ b/drivers/reset/Makefile
@@ -1,7 +1,6 @@
obj-y += core.o
obj-$(CONFIG_ARCH_STI) += sti/
obj-$(CONFIG_ARCH_HISI) += hisilicon/
-obj-$(CONFIG_ARCH_ZYNQ) += reset-zynq.o
obj-$(CONFIG_RESET_ATH79) += reset-ath79.o
obj-$(CONFIG_RESET_BERLIN) += reset-berlin.o
obj-$(CONFIG_RESET_LPC18XX) += reset-lpc18xx.o
@@ -13,3 +12,4 @@ obj-$(CONFIG_RESET_STM32) += reset-stm32.o
obj-$(CONFIG_RESET_SUNXI) += reset-sunxi.o
obj-$(CONFIG_TI_SYSCON_RESET) += reset-ti-syscon.o
obj-$(CONFIG_RESET_UNIPHIER) += reset-uniphier.o
+obj-$(CONFIG_RESET_ZYNQ) += reset-zynq.o
--
2.8.1
^ permalink raw reply related [flat|nested] 14+ messages in thread
* [PATCH v2 10/10] reset: hi6220: allow to compile test driver on other architectures
2016-08-30 8:24 [PATCH v2 01/10] reset: ath79: add driver Kconfig option Philipp Zabel
` (7 preceding siblings ...)
2016-08-30 8:24 ` [PATCH v2 09/10] reset: zynq: " Philipp Zabel
@ 2016-08-30 8:24 ` Philipp Zabel
2016-08-30 10:04 ` Masahiro Yamada
8 siblings, 1 reply; 14+ messages in thread
From: Philipp Zabel @ 2016-08-30 8:24 UTC (permalink / raw)
To: linux-kernel
Cc: Masahiro Yamada, Arnd Bergmann, Axel Lin, Hans de Goede,
Maxime Ripard, Lee Jones, linux-arm-kernel, Philipp Zabel,
Chen Feng
Also remove the RESET_CONTROLLER dependency, this Kconfig file is
included inside the menuconfig already.
Cc: Chen Feng <puck.chen@hisilicon.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
---
Changes since v1:
- To build without ARCH_HISI enabled, add hisilicon/ to obj-y
unconditionally.
---
drivers/reset/Makefile | 2 +-
drivers/reset/hisilicon/Kconfig | 3 ++-
2 files changed, 3 insertions(+), 2 deletions(-)
diff --git a/drivers/reset/Makefile b/drivers/reset/Makefile
index 56f90ea..bbe7026 100644
--- a/drivers/reset/Makefile
+++ b/drivers/reset/Makefile
@@ -1,6 +1,6 @@
obj-y += core.o
+obj-y += hisilicon/
obj-$(CONFIG_ARCH_STI) += sti/
-obj-$(CONFIG_ARCH_HISI) += hisilicon/
obj-$(CONFIG_RESET_ATH79) += reset-ath79.o
obj-$(CONFIG_RESET_BERLIN) += reset-berlin.o
obj-$(CONFIG_RESET_LPC18XX) += reset-lpc18xx.o
diff --git a/drivers/reset/hisilicon/Kconfig b/drivers/reset/hisilicon/Kconfig
index 26bf95a..1ff8b0c 100644
--- a/drivers/reset/hisilicon/Kconfig
+++ b/drivers/reset/hisilicon/Kconfig
@@ -1,5 +1,6 @@
config COMMON_RESET_HI6220
tristate "Hi6220 Reset Driver"
- depends on (ARCH_HISI && RESET_CONTROLLER)
+ depends on ARCH_HISI || COMPILE_TEST
+ default ARCH_HISI
help
Build the Hisilicon Hi6220 reset driver.
--
2.8.1
^ permalink raw reply related [flat|nested] 14+ messages in thread
* Re: [PATCH v2 09/10] reset: zynq: add driver Kconfig option
2016-08-30 8:24 ` [PATCH v2 09/10] reset: zynq: " Philipp Zabel
@ 2016-08-30 10:01 ` Michal Simek
0 siblings, 0 replies; 14+ messages in thread
From: Michal Simek @ 2016-08-30 10:01 UTC (permalink / raw)
To: Philipp Zabel, linux-kernel
Cc: Masahiro Yamada, Arnd Bergmann, Axel Lin, Hans de Goede,
Maxime Ripard, Lee Jones, linux-arm-kernel, Moritz Fischer,
Michal Simek, Sören Brinkmann
On 30.8.2016 10:24, Philipp Zabel wrote:
> Visible only if COMPILE_TEST is enabled, this allows to include the
> driver in build tests.
>
> Cc: Moritz Fischer <moritz.fischer@ettus.com>
> Cc: Michal Simek <michal.simek@xilinx.com>
> Cc: Sören Brinkmann <soren.brinkmann@xilinx.com>
> Reviewed-by: Masahiro Yamada <yamada.masahiro@socionext.com>
> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
> ---
> Changes since v1:
> - Fix alphabetical order of Kconfig options
> ---
> drivers/reset/Kconfig | 6 ++++++
> drivers/reset/Makefile | 2 +-
> 2 files changed, 7 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/reset/Kconfig b/drivers/reset/Kconfig
> index 7f748af..06d9fa2 100644
> --- a/drivers/reset/Kconfig
> +++ b/drivers/reset/Kconfig
> @@ -86,6 +86,12 @@ config RESET_UNIPHIER
> Say Y if you want to control reset signals provided by System Control
> block, Media I/O block, Peripheral Block.
>
> +config RESET_ZYNQ
> + bool "ZYNQ Reset Driver" if COMPILE_TEST
> + default ARCH_ZYNQ
> + help
> + This enables the reset controller driver for Xilinx Zynq SoCs.
> +
> source "drivers/reset/sti/Kconfig"
> source "drivers/reset/hisilicon/Kconfig"
>
> diff --git a/drivers/reset/Makefile b/drivers/reset/Makefile
> index 4a163c7..56f90ea 100644
> --- a/drivers/reset/Makefile
> +++ b/drivers/reset/Makefile
> @@ -1,7 +1,6 @@
> obj-y += core.o
> obj-$(CONFIG_ARCH_STI) += sti/
> obj-$(CONFIG_ARCH_HISI) += hisilicon/
> -obj-$(CONFIG_ARCH_ZYNQ) += reset-zynq.o
> obj-$(CONFIG_RESET_ATH79) += reset-ath79.o
> obj-$(CONFIG_RESET_BERLIN) += reset-berlin.o
> obj-$(CONFIG_RESET_LPC18XX) += reset-lpc18xx.o
> @@ -13,3 +12,4 @@ obj-$(CONFIG_RESET_STM32) += reset-stm32.o
> obj-$(CONFIG_RESET_SUNXI) += reset-sunxi.o
> obj-$(CONFIG_TI_SYSCON_RESET) += reset-ti-syscon.o
> obj-$(CONFIG_RESET_UNIPHIER) += reset-uniphier.o
> +obj-$(CONFIG_RESET_ZYNQ) += reset-zynq.o
>
Acked-by: Michal Simek <michal.simek@xilinx.com>
Thanks,
Michal
^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: [PATCH v2 10/10] reset: hi6220: allow to compile test driver on other architectures
2016-08-30 8:24 ` [PATCH v2 10/10] reset: hi6220: allow to compile test driver on other architectures Philipp Zabel
@ 2016-08-30 10:04 ` Masahiro Yamada
0 siblings, 0 replies; 14+ messages in thread
From: Masahiro Yamada @ 2016-08-30 10:04 UTC (permalink / raw)
To: Philipp Zabel
Cc: Linux Kernel Mailing List, Arnd Bergmann, Axel Lin,
Hans de Goede, Maxime Ripard, Lee Jones, linux-arm-kernel,
Chen Feng
2016-08-30 17:24 GMT+09:00 Philipp Zabel <p.zabel@pengutronix.de>:
> Also remove the RESET_CONTROLLER dependency, this Kconfig file is
> included inside the menuconfig already.
>
> Cc: Chen Feng <puck.chen@hisilicon.com>
> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Reviewed-by: Masahiro Yamada <yamada.masahiro@socionext.com>
--
Best Regards
Masahiro Yamada
^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: [PATCH v2 07/10] reset: stm32: add driver Kconfig option
2016-08-30 8:24 ` [PATCH v2 07/10] reset: stm32: " Philipp Zabel
@ 2016-09-03 10:47 ` Maxime Coquelin
0 siblings, 0 replies; 14+ messages in thread
From: Maxime Coquelin @ 2016-09-03 10:47 UTC (permalink / raw)
To: Philipp Zabel
Cc: linux-kernel, Masahiro Yamada, Arnd Bergmann, Axel Lin,
Hans de Goede, Maxime Ripard, Lee Jones, linux-arm-kernel,
Gabriel Fernandez
2016-08-30 10:24 GMT+02:00 Philipp Zabel <p.zabel@pengutronix.de>:
> Visible only if COMPILE_TEST is enabled, this allows to include the
> driver in build tests.
>
> Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com>
> Cc: Gabriel Fernandez <gabriel.fernandez@st.com>
> Reviewed-by: Masahiro Yamada <yamada.masahiro@socionext.com>
> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
> ---
> drivers/reset/Kconfig | 6 ++++++
> drivers/reset/Makefile | 2 +-
> 2 files changed, 7 insertions(+), 1 deletion(-)
In line with what we did on other stm32 drivers:
Reviewed-by: Maxime Coquelin <mcoquelin.stm32@gmail.com>
Thanks!
Maxime
^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: [PATCH v2 02/10] reset: berlin: add driver Kconfig option
2016-08-30 8:24 ` [PATCH v2 02/10] reset: berlin: " Philipp Zabel
@ 2016-09-28 19:21 ` Sebastian Hesselbarth
0 siblings, 0 replies; 14+ messages in thread
From: Sebastian Hesselbarth @ 2016-09-28 19:21 UTC (permalink / raw)
To: Philipp Zabel, linux-kernel
Cc: Masahiro Yamada, Arnd Bergmann, Axel Lin, Hans de Goede,
Maxime Ripard, Lee Jones, linux-arm-kernel, Antoine Tenart
On 30.08.2016 10:24, Philipp Zabel wrote:
> Visible only if COMPILE_TEST is enabled, this allows to include the
> driver in build tests.
>
> Cc: Antoine Tenart <antoine.tenart@free-electrons.com>
> Cc: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
> Reviewed-by: Masahiro Yamada <yamada.masahiro@socionext.com>
> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Sorry for the late reply, FWIW
Acked-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
> ---
> drivers/reset/Kconfig | 6 ++++++
> drivers/reset/Makefile | 2 +-
> 2 files changed, 7 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/reset/Kconfig b/drivers/reset/Kconfig
> index 9da0507..1194cbe 100644
> --- a/drivers/reset/Kconfig
> +++ b/drivers/reset/Kconfig
> @@ -21,6 +21,12 @@ config RESET_ATH79
> This enables the ATH79 reset controller driver that supports the
> AR71xx SoC reset controller.
>
> +config RESET_BERLIN
> + bool "Berlin Reset Driver" if COMPILE_TEST
> + default ARCH_BERLIN
> + help
> + This enables the reset controller driver for Marvell Berlin SoCs.
> +
> config RESET_OXNAS
> bool
>
> diff --git a/drivers/reset/Makefile b/drivers/reset/Makefile
> index e3fc337..34c0b23 100644
> --- a/drivers/reset/Makefile
> +++ b/drivers/reset/Makefile
> @@ -1,7 +1,6 @@
> obj-y += core.o
> obj-$(CONFIG_ARCH_LPC18XX) += reset-lpc18xx.o
> obj-$(CONFIG_ARCH_SOCFPGA) += reset-socfpga.o
> -obj-$(CONFIG_ARCH_BERLIN) += reset-berlin.o
> obj-$(CONFIG_MACH_PISTACHIO) += reset-pistachio.o
> obj-$(CONFIG_ARCH_MESON) += reset-meson.o
> obj-$(CONFIG_ARCH_STM32) += reset-stm32.o
> @@ -10,6 +9,7 @@ obj-$(CONFIG_ARCH_STI) += sti/
> obj-$(CONFIG_ARCH_HISI) += hisilicon/
> obj-$(CONFIG_ARCH_ZYNQ) += reset-zynq.o
> obj-$(CONFIG_RESET_ATH79) += reset-ath79.o
> +obj-$(CONFIG_RESET_BERLIN) += reset-berlin.o
> obj-$(CONFIG_RESET_OXNAS) += reset-oxnas.o
> obj-$(CONFIG_TI_SYSCON_RESET) += reset-ti-syscon.o
> obj-$(CONFIG_RESET_UNIPHIER) += reset-uniphier.o
>
^ permalink raw reply [flat|nested] 14+ messages in thread
end of thread, other threads:[~2016-09-28 19:21 UTC | newest]
Thread overview: 14+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2016-08-30 8:24 [PATCH v2 01/10] reset: ath79: add driver Kconfig option Philipp Zabel
2016-08-30 8:24 ` [PATCH v2 02/10] reset: berlin: " Philipp Zabel
2016-09-28 19:21 ` Sebastian Hesselbarth
2016-08-30 8:24 ` [PATCH v2 03/10] reset: lpc18xx: " Philipp Zabel
2016-08-30 8:24 ` [PATCH v2 04/10] reset: meson: " Philipp Zabel
2016-08-30 8:24 ` [PATCH v2 05/10] reset: pistachio: " Philipp Zabel
2016-08-30 8:24 ` [PATCH v2 06/10] reset: socfpga: " Philipp Zabel
2016-08-30 8:24 ` [PATCH v2 07/10] reset: stm32: " Philipp Zabel
2016-09-03 10:47 ` Maxime Coquelin
2016-08-30 8:24 ` [PATCH v2 08/10] reset: sunxi: " Philipp Zabel
2016-08-30 8:24 ` [PATCH v2 09/10] reset: zynq: " Philipp Zabel
2016-08-30 10:01 ` Michal Simek
2016-08-30 8:24 ` [PATCH v2 10/10] reset: hi6220: allow to compile test driver on other architectures Philipp Zabel
2016-08-30 10:04 ` Masahiro Yamada
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).