* [PATCH 1/1] thermal/powerclamp: correct cpu support check
@ 2016-10-06 15:56 Eric Ernst
2016-10-07 12:46 ` Jacob Pan
0 siblings, 1 reply; 2+ messages in thread
From: Eric Ernst @ 2016-10-06 15:56 UTC (permalink / raw)
To: linux-kernel, linux-pm
Cc: rui.zhang, edubezval, rafael.j.wysocki, jacob.jun.pan, Eric Ernst
Initial logic for checking CPU match resulted in OR of CPU features
rather than the intended AND.
Updated to use boot_cpu_has macro rather than x86_match_cpu.
In addition, MWAIT is the only required CPU feature for idle
injection to work. Drop other feature requirements since they are
only needed for optimal efficiency.
Signed-off-by: Eric Ernst <eric.ernst@linux.intel.com>
---
drivers/thermal/intel_powerclamp.c | 14 ++------------
1 file changed, 2 insertions(+), 12 deletions(-)
diff --git a/drivers/thermal/intel_powerclamp.c b/drivers/thermal/intel_powerclamp.c
index 0e4dc0afcfd2..7a223074df3d 100644
--- a/drivers/thermal/intel_powerclamp.c
+++ b/drivers/thermal/intel_powerclamp.c
@@ -669,20 +669,10 @@ static struct thermal_cooling_device_ops powerclamp_cooling_ops = {
.set_cur_state = powerclamp_set_cur_state,
};
-static const struct x86_cpu_id intel_powerclamp_ids[] __initconst = {
- { X86_VENDOR_INTEL, X86_FAMILY_ANY, X86_MODEL_ANY, X86_FEATURE_MWAIT },
- { X86_VENDOR_INTEL, X86_FAMILY_ANY, X86_MODEL_ANY, X86_FEATURE_ARAT },
- { X86_VENDOR_INTEL, X86_FAMILY_ANY, X86_MODEL_ANY, X86_FEATURE_NONSTOP_TSC },
- { X86_VENDOR_INTEL, X86_FAMILY_ANY, X86_MODEL_ANY, X86_FEATURE_CONSTANT_TSC},
- {}
-};
-MODULE_DEVICE_TABLE(x86cpu, intel_powerclamp_ids);
-
static int __init powerclamp_probe(void)
{
- if (!x86_match_cpu(intel_powerclamp_ids)) {
- pr_err("Intel powerclamp does not run on family %d model %d\n",
- boot_cpu_data.x86, boot_cpu_data.x86_model);
+ if (!boot_cpu_has(X86_FEATURE_MWAIT)) {
+ pr_err("CPU does not support MWAIT");
return -ENODEV;
}
--
1.9.1
^ permalink raw reply related [flat|nested] 2+ messages in thread
* Re: [PATCH 1/1] thermal/powerclamp: correct cpu support check
2016-10-06 15:56 [PATCH 1/1] thermal/powerclamp: correct cpu support check Eric Ernst
@ 2016-10-07 12:46 ` Jacob Pan
0 siblings, 0 replies; 2+ messages in thread
From: Jacob Pan @ 2016-10-07 12:46 UTC (permalink / raw)
To: Eric Ernst
Cc: linux-kernel, linux-pm, rui.zhang, edubezval, rafael.j.wysocki,
jacob.jun.pan
On Thu, 6 Oct 2016 08:56:49 -0700
Eric Ernst <eric.ernst@linux.intel.com> wrote:
> Initial logic for checking CPU match resulted in OR of CPU features
> rather than the intended AND.
>
> Updated to use boot_cpu_has macro rather than x86_match_cpu.
>
> In addition, MWAIT is the only required CPU feature for idle
> injection to work. Drop other feature requirements since they are
> only needed for optimal efficiency.
>
Acked-by: Jacob Pan <jacob.jun.pan@linux.intel.com>
> Signed-off-by: Eric Ernst <eric.ernst@linux.intel.com>
> ---
> drivers/thermal/intel_powerclamp.c | 14 ++------------
> 1 file changed, 2 insertions(+), 12 deletions(-)
>
> diff --git a/drivers/thermal/intel_powerclamp.c
> b/drivers/thermal/intel_powerclamp.c index 0e4dc0afcfd2..7a223074df3d
> 100644 --- a/drivers/thermal/intel_powerclamp.c
> +++ b/drivers/thermal/intel_powerclamp.c
> @@ -669,20 +669,10 @@ static struct thermal_cooling_device_ops
> powerclamp_cooling_ops = { .set_cur_state = powerclamp_set_cur_state,
> };
>
> -static const struct x86_cpu_id intel_powerclamp_ids[] __initconst = {
> - { X86_VENDOR_INTEL, X86_FAMILY_ANY, X86_MODEL_ANY,
> X86_FEATURE_MWAIT },
> - { X86_VENDOR_INTEL, X86_FAMILY_ANY, X86_MODEL_ANY,
> X86_FEATURE_ARAT },
> - { X86_VENDOR_INTEL, X86_FAMILY_ANY, X86_MODEL_ANY,
> X86_FEATURE_NONSTOP_TSC },
> - { X86_VENDOR_INTEL, X86_FAMILY_ANY, X86_MODEL_ANY,
> X86_FEATURE_CONSTANT_TSC},
> - {}
> -};
> -MODULE_DEVICE_TABLE(x86cpu, intel_powerclamp_ids);
> -
> static int __init powerclamp_probe(void)
> {
> - if (!x86_match_cpu(intel_powerclamp_ids)) {
> - pr_err("Intel powerclamp does not run on family %d
> model %d\n",
> - boot_cpu_data.x86,
> boot_cpu_data.x86_model);
> + if (!boot_cpu_has(X86_FEATURE_MWAIT)) {
> + pr_err("CPU does not support MWAIT");
> return -ENODEV;
> }
>
[Jacob Pan]
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2016-10-07 12:44 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2016-10-06 15:56 [PATCH 1/1] thermal/powerclamp: correct cpu support check Eric Ernst
2016-10-07 12:46 ` Jacob Pan
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).