linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Tomas Winkler <tomas.winkler@intel.com>
To: tpmdd-devel@lists.sourceforge.net,
	Jason Gunthorpe <jgunthorpe@obsidianresearch.com>,
	Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Cc: linux-kernel@vger.kernel.org, "Winkler, Tomas" <tomas.winkler@intel.com>
Subject: [PATCH 2/4] tmp/tpm_crb: fix Intel PTT hw bug during idle state
Date: Sat,  8 Oct 2016 14:59:37 +0300	[thread overview]
Message-ID: <1475927979-23484-3-git-send-email-tomas.winkler@intel.com> (raw)
In-Reply-To: <1475927979-23484-1-git-send-email-tomas.winkler@intel.com>

From: "Winkler, Tomas" <tomas.winkler@intel.com>

There is a HW bug in Skylake, Kabylake, and Broxton PCH Intel PTT device,
where most of the registers in the control area except START, REQUEST,
CANCEL, and LOC_CTRL lost retention when the device is in the idle state.
Hence we need to bring the device to ready state before accessing the other
registers. The fix brings device to ready state before trying to read
command and response buffer addresses in order to remap the for access.

Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
---
V2: cmd read need to be called also before crb_init as this will run
 self test.
V3: resend.
V4: add Kabylake to the list of effected platforms

 drivers/char/tpm/tpm_crb.c | 47 ++++++++++++++++++++++++++++++++++++++--------
 1 file changed, 39 insertions(+), 8 deletions(-)

diff --git a/drivers/char/tpm/tpm_crb.c b/drivers/char/tpm/tpm_crb.c
index 0f3b3f3d12d3..4eb96b85c653 100644
--- a/drivers/char/tpm/tpm_crb.c
+++ b/drivers/char/tpm/tpm_crb.c
@@ -319,6 +319,7 @@ static int crb_map_io(struct acpi_device *device, struct crb_priv *priv,
 	struct list_head resources;
 	struct resource io_res;
 	struct device *dev = &device->dev;
+	u32 pa_high, pa_low;
 	u64 cmd_pa;
 	u32 cmd_size;
 	u64 rsp_pa;
@@ -346,12 +347,27 @@ static int crb_map_io(struct acpi_device *device, struct crb_priv *priv,
 	if (IS_ERR(priv->cca))
 		return PTR_ERR(priv->cca);
 
-	cmd_pa = ((u64) ioread32(&priv->cca->cmd_pa_high) << 32) |
-		  (u64) ioread32(&priv->cca->cmd_pa_low);
+	/*
+	 * PTT HW bug w/a: wake up the device to access
+	 * possibly not retained registers.
+	 */
+	ret = crb_cmd_ready(dev, priv);
+	if (ret)
+		return ret;
+
+	pa_high = ioread32(&priv->cca->cmd_pa_high);
+	pa_low  = ioread32(&priv->cca->cmd_pa_low);
+	cmd_pa = ((u64)pa_high << 32) | pa_low;
 	cmd_size = ioread32(&priv->cca->cmd_size);
+
+	dev_dbg(dev, "cmd_hi = %X cmd_low = %X cmd_size %X\n",
+		pa_high, pa_low, cmd_size);
+
 	priv->cmd = crb_map_res(dev, priv, &io_res, cmd_pa, cmd_size);
-	if (IS_ERR(priv->cmd))
-		return PTR_ERR(priv->cmd);
+	if (IS_ERR(priv->cmd)) {
+		ret = PTR_ERR(priv->cmd);
+		goto out;
+	}
 
 	memcpy_fromio(&rsp_pa, &priv->cca->rsp_pa, 8);
 	rsp_pa = le64_to_cpu(rsp_pa);
@@ -359,7 +375,8 @@ static int crb_map_io(struct acpi_device *device, struct crb_priv *priv,
 
 	if (cmd_pa != rsp_pa) {
 		priv->rsp = crb_map_res(dev, priv, &io_res, rsp_pa, rsp_size);
-		return PTR_ERR_OR_ZERO(priv->rsp);
+		ret = PTR_ERR_OR_ZERO(priv->rsp);
+		goto out;
 	}
 
 	/* According to the PTP specification, overlapping command and response
@@ -367,12 +384,18 @@ static int crb_map_io(struct acpi_device *device, struct crb_priv *priv,
 	 */
 	if (cmd_size != rsp_size) {
 		dev_err(dev, FW_BUG "overlapping command and response buffer sizes are not identical");
-		return -EINVAL;
+		ret = -EINVAL;
+		goto out;
 	}
+
 	priv->cmd_size = cmd_size;
 
 	priv->rsp = priv->cmd;
-	return 0;
+
+out:
+	crb_go_idle(dev, priv);
+
+	return ret;
 }
 
 static int crb_acpi_add(struct acpi_device *device)
@@ -416,7 +439,15 @@ static int crb_acpi_add(struct acpi_device *device)
 	if (rc)
 		return rc;
 
-	return crb_init(device, priv);
+	rc  = crb_cmd_ready(dev, priv);
+	if (rc)
+		return rc;
+
+	rc = crb_init(device, priv);
+	if (rc)
+		crb_go_idle(dev, priv);
+
+	return rc;
 }
 
 static int crb_acpi_remove(struct acpi_device *device)
-- 
2.7.4

  parent reply	other threads:[~2016-10-08 12:04 UTC|newest]

Thread overview: 21+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-10-08 11:59 [PATCH v4 0/4] tpm/tpm_crb: implement power management Tomas Winkler
2016-10-08 11:59 ` [PATCH v4 1/4] tpm/tpm_crb: implement tpm crb idle state Tomas Winkler
2016-10-08 16:30   ` Jarkko Sakkinen
2016-10-08 11:59 ` Tomas Winkler [this message]
2016-10-08 12:50   ` [PATCH 2/4] tmp/tpm_crb: fix Intel PTT hw bug during " Jarkko Sakkinen
2016-10-08 14:27     ` Winkler, Tomas
2016-10-08 16:00       ` Jarkko Sakkinen
2016-10-08 16:42         ` Jason Gunthorpe
2016-10-08 16:58           ` Winkler, Tomas
2016-10-08 17:08           ` Jarkko Sakkinen
2016-10-08 16:56         ` Winkler, Tomas
2016-10-08 17:06           ` Jarkko Sakkinen
2016-10-08 17:27             ` Winkler, Tomas
2016-10-08 18:53               ` [tpmdd-devel] " Winkler, Tomas
2016-10-08 11:59 ` [PATCH 3/4] tpm/tpm_crb: open code the crb_init into acpi_add Tomas Winkler
2016-10-08 11:59 ` [PATCH 4/4] tmp/tpm_crb: implement runtime pm for tpm_crb Tomas Winkler
2016-10-08 12:47   ` Jarkko Sakkinen
2016-10-08 13:37     ` Winkler, Tomas
2016-10-08 16:01       ` Jarkko Sakkinen
2016-10-08 18:18         ` Winkler, Tomas
2016-10-08 18:43           ` Jarkko Sakkinen

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1475927979-23484-3-git-send-email-tomas.winkler@intel.com \
    --to=tomas.winkler@intel.com \
    --cc=jarkko.sakkinen@linux.intel.com \
    --cc=jgunthorpe@obsidianresearch.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=tpmdd-devel@lists.sourceforge.net \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).