[PATCH v4 00/11] ACPI platform MSI support

[PATCH v4 00/11] ACPI platform MSI support

[Hanjun Guo]

From: Hanjun Guo <hanjun.guo@linaro.org>

v3 -> v4:
	- Drop mbi-gen patches to just submit platform msi support because
	  will rebase mbi-gen patches on top of Agustin's patchset, and discusion
	  is going there.
	- Add a patch to support device topology such as NC(named componant, paltform device)
	  ->SMMU->ITS which suggested by Lorenzo;
	- rebased on top of Lorenzo's v9 of ACPI IORT ARM SMMU support;
	- rebased on top of 4.9-rc7

v2 -> v3:
        - Drop RFC tag
        - Rebase against v4.9-rc2 and Lorenzo's v6 of ACPI IORT ARM SMMU support [1]
        - Add 3 cleanup patches (patch 1, 2, 3)
        - Drop arch_init call patch from last version
        - Introduce a callback for platform device to set msi domain
        - Introduce a new API to get paltform device's domain instead of
          reusing the PCI one in previous version
        - Add a patch to rework iort_node_get_id()

[1]: http://www.mail-archive.com/linux-kernel@vger.kernel.org/msg1251993.html

v1 -> v2:
        - Fix the bug of if multi Interrupt() resoures in single _PRS,
          we need to calculate all the irq numbers (I missed it in previous
          version);
        - Rebased on Marc's irq/irqchip-4.9 branch and Lorenzo's v5
          SMMU patches (also Robin's SMMu patches)
        - Add patch irqchip: mbigen: promote mbigen init.

With platform msi support landed in the kernel, and the introduction
of IORT for GICv3 ITS (PCI MSI), the framework for platform msi
is ready, this patch set add few patches to enable the ACPI platform
msi support.

For platform device connecting to ITS on arm platform, we have IORT
table with the named componant node to describe the mappings of paltform
device and ITS, so we can retrieve the dev id and find its parent
irqdomain (ITS) from IORT table (simlar with the ACPI ITS support).

The fisrt 3 patches are cleanups;

Patch 4,5 are refactoring its_pmsi_prepare() for both DT and ACPI
then retrieve the dev id from iort;

Patch 6,7 to create platform msi domain to ACPI case which scanned
the MADT table;

Patch 8,9,10,11 to setup the msi domain for platform device based
on IORT table.

Teasted on Hisilicon D03.

Thanks
Hanjun

Hanjun Guo (11):
  ACPI: ARM64: IORT: minor cleanup for iort_match_node_callback()
  irqchip: gic-v3-its: keep the head file include in alphabetic order
  ACPI: ARM64: IORT: add missing comment for iort_dev_find_its_id()
  irqchip: gicv3-its: platform-msi: refactor its_pmsi_prepare()
  ACPI: platform-msi: retrieve dev id from IORT
  irqchip: gicv3-its: platform-msi: refactor its_pmsi_init() to prepare
    for ACPI
  irqchip: gicv3-its: platform-msi: scan MADT to create platform msi
    domain
  ACPI: ARM64: IORT: rework iort_node_get_id()
  ACPI: platform: setup MSI domain for ACPI based platform device
  ACPI: ARM64: IORT: rework iort_node_get_id() for NC->SMMU->ITS case
  msi: platform: make platform_msi_create_device_domain() ACPI aware

 drivers/acpi/acpi_platform.c                  |  11 ++
 drivers/acpi/arm64/iort.c                     | 138 ++++++++++++++++++++------
 drivers/base/platform-msi.c                   |   3 +-
 drivers/base/platform.c                       |   3 +
 drivers/irqchip/irq-gic-v3-its-platform-msi.c | 106 +++++++++++++++-----
 drivers/irqchip/irq-gic-v3-its.c              |   3 +-
 include/linux/acpi_iort.h                     |  11 ++
 include/linux/platform_device.h               |   3 +
 8 files changed, 217 insertions(+), 61 deletions(-)

-- 
1.7.12.4

[PATCH v4 01/11] ACPI: ARM64: IORT: minor cleanup for iort_match_node_callback()

[Hanjun Guo]

From: Hanjun Guo <hanjun.guo@linaro.org>

Cleanup iort_match_node_callback() a little bit to reduce
some lines of code, aslo fix the indentation in iort_scan_node().

Signed-off-by: Hanjun Guo <hanjun.guo@linaro.org>
Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: Tomasz Nowicki <tn@semihalf.com>
---
 drivers/acpi/arm64/iort.c | 10 +++-------
 1 file changed, 3 insertions(+), 7 deletions(-)

diff --git a/drivers/acpi/arm64/iort.c b/drivers/acpi/arm64/iort.c
index 47bace8..a52fc7e 100644
--- a/drivers/acpi/arm64/iort.c
+++ b/drivers/acpi/arm64/iort.c
@@ -225,7 +225,7 @@ static struct acpi_iort_node *iort_scan_node(enum acpi_iort_node_type type,
 
 		if (iort_node->type == type &&
 		    ACPI_SUCCESS(callback(iort_node, context)))
-				return iort_node;
+			return iort_node;
 
 		iort_node = ACPI_ADD_PTR(struct acpi_iort_node, iort_node,
 					 iort_node->length);
@@ -253,17 +253,15 @@ static acpi_status iort_match_node_callback(struct acpi_iort_node *node,
 					    void *context)
 {
 	struct device *dev = context;
-	acpi_status status;
+	acpi_status status = AE_NOT_FOUND;
 
 	if (node->type == ACPI_IORT_NODE_NAMED_COMPONENT) {
 		struct acpi_buffer buf = { ACPI_ALLOCATE_BUFFER, NULL };
 		struct acpi_device *adev = to_acpi_device_node(dev->fwnode);
 		struct acpi_iort_named_component *ncomp;
 
-		if (!adev) {
-			status = AE_NOT_FOUND;
+		if (!adev)
 			goto out;
-		}
 
 		status = acpi_get_name(adev->handle, ACPI_FULL_PATHNAME, &buf);
 		if (ACPI_FAILURE(status)) {
@@ -289,8 +287,6 @@ static acpi_status iort_match_node_callback(struct acpi_iort_node *node,
 		 */
 		status = pci_rc->pci_segment_number == pci_domain_nr(bus) ?
 							AE_OK : AE_NOT_FOUND;
-	} else {
-		status = AE_NOT_FOUND;
 	}
 out:
 	return status;
-- 
1.7.12.4

[PATCH v4 02/11] irqchip: gic-v3-its: keep the head file include in alphabetic order

[Hanjun Guo]

From: Hanjun Guo <hanjun.guo@linaro.org>

The head file is strictly in alphabetic order now, so let's
be the rule breaker. As acpi_iort.h includes acpi.h so remove
the duplidate acpi.h inclusion as well.

Signed-off-by: Hanjun Guo <hanjun.guo@linaro.org>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: Tomasz Nowicki <tn@semihalf.com>
---
 drivers/irqchip/irq-gic-v3-its.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

diff --git a/drivers/irqchip/irq-gic-v3-its.c b/drivers/irqchip/irq-gic-v3-its.c
index c5dee30..1508bf4 100644
--- a/drivers/irqchip/irq-gic-v3-its.c
+++ b/drivers/irqchip/irq-gic-v3-its.c
@@ -15,14 +15,13 @@
  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  */
 
-#include <linux/acpi.h>
+#include <linux/acpi_iort.h>
 #include <linux/bitmap.h>
 #include <linux/cpu.h>
 #include <linux/delay.h>
 #include <linux/dma-iommu.h>
 #include <linux/interrupt.h>
 #include <linux/irqdomain.h>
-#include <linux/acpi_iort.h>
 #include <linux/log2.h>
 #include <linux/mm.h>
 #include <linux/msi.h>
-- 
1.7.12.4

[PATCH v4 03/11] ACPI: ARM64: IORT: add missing comment for iort_dev_find_its_id()

[Hanjun Guo]

From: Hanjun Guo <hanjun.guo@linaro.org>

We are missing req_id's comment for iort_dev_find_its_id(),
add it back.

Signed-off-by: Hanjun Guo <hanjun.guo@linaro.org>
Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: Tomasz Nowicki <tn@semihalf.com>
---
 drivers/acpi/arm64/iort.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/acpi/arm64/iort.c b/drivers/acpi/arm64/iort.c
index a52fc7e..c1405e5 100644
--- a/drivers/acpi/arm64/iort.c
+++ b/drivers/acpi/arm64/iort.c
@@ -446,6 +446,7 @@ u32 iort_msi_map_rid(struct device *dev, u32 req_id)
 /**
  * iort_dev_find_its_id() - Find the ITS identifier for a device
  * @dev: The device.
+ * @req_id: Device's Requster ID
  * @idx: Index of the ITS identifier list.
  * @its_id: ITS identifier.
  *
-- 
1.7.12.4

[PATCH v4 04/11] irqchip: gicv3-its: platform-msi: refactor its_pmsi_prepare()

[Hanjun Guo]

From: Hanjun Guo <hanjun.guo@linaro.org>

Adding ACPI support for platform MSI, we need to retrieve the
dev id in ACPI way instead of device tree, we already have
a well formed function its_pmsi_prepare() to get the dev id
but it's OF dependent, so collect OF related code and put them
into a single function to make its_pmsi_prepare() more friendly
to ACPI later.

Signed-off-by: Hanjun Guo <hanjun.guo@linaro.org>
Tested-by: Sinan Kaya <okaya@codeaurora.org>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: Tomasz Nowicki <tn@semihalf.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
---
 drivers/irqchip/irq-gic-v3-its-platform-msi.c | 23 ++++++++++++++++-------
 1 file changed, 16 insertions(+), 7 deletions(-)

diff --git a/drivers/irqchip/irq-gic-v3-its-platform-msi.c b/drivers/irqchip/irq-gic-v3-its-platform-msi.c
index 470b4aa..3c94278 100644
--- a/drivers/irqchip/irq-gic-v3-its-platform-msi.c
+++ b/drivers/irqchip/irq-gic-v3-its-platform-msi.c
@@ -24,15 +24,11 @@
 	.name			= "ITS-pMSI",
 };
 
-static int its_pmsi_prepare(struct irq_domain *domain, struct device *dev,
-			    int nvec, msi_alloc_info_t *info)
+static int of_pmsi_get_dev_id(struct irq_domain *domain, struct device *dev,
+				  u32 *dev_id)
 {
-	struct msi_domain_info *msi_info;
-	u32 dev_id;
 	int ret, index = 0;
 
-	msi_info = msi_get_domain_info(domain->parent);
-
 	/* Suck the DeviceID out of the msi-parent property */
 	do {
 		struct of_phandle_args args;
@@ -43,11 +39,24 @@ static int its_pmsi_prepare(struct irq_domain *domain, struct device *dev,
 		if (args.np == irq_domain_get_of_node(domain)) {
 			if (WARN_ON(args.args_count != 1))
 				return -EINVAL;
-			dev_id = args.args[0];
+			*dev_id = args.args[0];
 			break;
 		}
 	} while (!ret);
 
+	return ret;
+}
+
+static int its_pmsi_prepare(struct irq_domain *domain, struct device *dev,
+			    int nvec, msi_alloc_info_t *info)
+{
+	struct msi_domain_info *msi_info;
+	u32 dev_id;
+	int ret;
+
+	msi_info = msi_get_domain_info(domain->parent);
+
+	ret = of_pmsi_get_dev_id(domain, dev, &dev_id);
 	if (ret)
 		return ret;
 
-- 
1.7.12.4

[PATCH v4 05/11] ACPI: platform-msi: retrieve dev id from IORT

[Hanjun Guo]

From: Hanjun Guo <hanjun.guo@linaro.org>

For devices connecting to ITS, it needs dev id to identify
itself, and this dev id is represented in the IORT table in
named componant node [1] for platform devices, so in this
patch we will scan the IORT to retrieve device's dev id.

Introduce iort_pmsi_get_dev_id() with pointer dev passed
in for that purpose.

[1]: https://static.docs.arm.com/den0049/b/DEN0049B_IO_Remapping_Table.pdf

Signed-off-by: Hanjun Guo <hanjun.guo@linaro.org>
Tested-by: Sinan Kaya <okaya@codeaurora.org>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: Tomasz Nowicki <tn@semihalf.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
---
 drivers/acpi/arm64/iort.c                     | 26 ++++++++++++++++++++++++++
 drivers/irqchip/irq-gic-v3-its-platform-msi.c |  4 +++-
 include/linux/acpi_iort.h                     |  8 ++++++++
 3 files changed, 37 insertions(+), 1 deletion(-)

diff --git a/drivers/acpi/arm64/iort.c b/drivers/acpi/arm64/iort.c
index c1405e5..7b78282a 100644
--- a/drivers/acpi/arm64/iort.c
+++ b/drivers/acpi/arm64/iort.c
@@ -444,6 +444,32 @@ u32 iort_msi_map_rid(struct device *dev, u32 req_id)
 }
 
 /**
+ * iort_pmsi_get_dev_id() - Get the device id for a device
+ * @dev: The device for which the mapping is to be done.
+ * @dev_id: The device ID found.
+ *
+ * Returns: 0 for successful find a dev id, errors otherwise
+ */
+int iort_pmsi_get_dev_id(struct device *dev, u32 *dev_id)
+{
+	struct acpi_iort_node *node;
+
+	if (!iort_table)
+		return -ENODEV;
+
+	node = iort_find_dev_node(dev);
+	if (!node) {
+		dev_err(dev, "can't find related IORT node\n");
+		return -ENODEV;
+	}
+
+	if(!iort_node_get_id(node, dev_id, IORT_MSI_TYPE, 0))
+		return -ENODEV;
+
+	return 0;
+}
+
+/**
  * iort_dev_find_its_id() - Find the ITS identifier for a device
  * @dev: The device.
  * @req_id: Device's Requster ID
diff --git a/drivers/irqchip/irq-gic-v3-its-platform-msi.c b/drivers/irqchip/irq-gic-v3-its-platform-msi.c
index 3c94278..16587a9 100644
--- a/drivers/irqchip/irq-gic-v3-its-platform-msi.c
+++ b/drivers/irqchip/irq-gic-v3-its-platform-msi.c
@@ -15,6 +15,7 @@
  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  */
 
+#include <linux/acpi_iort.h>
 #include <linux/device.h>
 #include <linux/msi.h>
 #include <linux/of.h>
@@ -56,7 +57,8 @@ static int its_pmsi_prepare(struct irq_domain *domain, struct device *dev,
 
 	msi_info = msi_get_domain_info(domain->parent);
 
-	ret = of_pmsi_get_dev_id(domain, dev, &dev_id);
+	ret = dev->of_node ? of_pmsi_get_dev_id(domain, dev, &dev_id) :
+		iort_pmsi_get_dev_id(dev, &dev_id);
 	if (ret)
 		return ret;
 
diff --git a/include/linux/acpi_iort.h b/include/linux/acpi_iort.h
index dcb2b60..3f717cc 100644
--- a/include/linux/acpi_iort.h
+++ b/include/linux/acpi_iort.h
@@ -33,6 +33,7 @@
 void acpi_iort_init(void);
 bool iort_node_match(u8 type);
 u32 iort_msi_map_rid(struct device *dev, u32 req_id);
+int iort_pmsi_get_dev_id(struct device *dev, u32 *dev_id);
 struct irq_domain *iort_get_device_domain(struct device *dev, u32 req_id);
 /* IOMMU interface */
 const struct iommu_ops *iort_iommu_configure(struct device *dev);
@@ -41,9 +42,16 @@ static inline void acpi_iort_init(void) { }
 static inline bool iort_node_match(u8 type) { return false; }
 static inline u32 iort_msi_map_rid(struct device *dev, u32 req_id)
 { return req_id; }
+
 static inline struct irq_domain *iort_get_device_domain(struct device *dev,
 							u32 req_id)
 { return NULL; }
+
+static inline int iort_pmsi_get_dev_id(struct device *dev, u32 *dev_id)
+{
+	return -ENODEV;
+}
+
 /* IOMMU interface */
 static inline
 const struct iommu_ops *iort_iommu_configure(struct device *dev)
-- 
1.7.12.4

[PATCH v4 06/11] irqchip: gicv3-its: platform-msi: refactor its_pmsi_init() to prepare for ACPI

[Hanjun Guo]

From: Hanjun Guo <hanjun.guo@linaro.org>

Introduce its_pmsi_init_one() to refactor the code to isolate
ACPI&DT common code to prepare for ACPI later.

Signed-off-by: Hanjun Guo <hanjun.guo@linaro.org>
Tested-by: Sinan Kaya <okaya@codeaurora.org>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: Tomasz Nowicki <tn@semihalf.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
---
 drivers/irqchip/irq-gic-v3-its-platform-msi.c | 45 ++++++++++++++++-----------
 1 file changed, 27 insertions(+), 18 deletions(-)

diff --git a/drivers/irqchip/irq-gic-v3-its-platform-msi.c b/drivers/irqchip/irq-gic-v3-its-platform-msi.c
index 16587a9..ff72704 100644
--- a/drivers/irqchip/irq-gic-v3-its-platform-msi.c
+++ b/drivers/irqchip/irq-gic-v3-its-platform-msi.c
@@ -84,34 +84,43 @@ static int its_pmsi_prepare(struct irq_domain *domain, struct device *dev,
 	{},
 };
 
-static int __init its_pmsi_init(void)
+static int __init its_pmsi_init_one(struct fwnode_handle *fwnode,
+				const char *name)
 {
-	struct device_node *np;
 	struct irq_domain *parent;
 
+	parent = irq_find_matching_fwnode(fwnode, DOMAIN_BUS_NEXUS);
+	if (!parent || !msi_get_domain_info(parent)) {
+		pr_err("%s: unable to locate ITS domain\n", name);
+		return -ENXIO;
+	}
+
+	if (!platform_msi_create_irq_domain(fwnode, &its_pmsi_domain_info,
+					    parent)) {
+		pr_err("%s: unable to create platform domain\n", name);
+		return -ENXIO;
+	}
+
+	pr_info("Platform MSI: %s domain created\n", name);
+	return 0;
+}
+
+static void __init its_pmsi_of_init(void)
+{
+	struct device_node *np;
+
 	for (np = of_find_matching_node(NULL, its_device_id); np;
 	     np = of_find_matching_node(np, its_device_id)) {
 		if (!of_property_read_bool(np, "msi-controller"))
 			continue;
 
-		parent = irq_find_matching_host(np, DOMAIN_BUS_NEXUS);
-		if (!parent || !msi_get_domain_info(parent)) {
-			pr_err("%s: unable to locate ITS domain\n",
-			       np->full_name);
-			continue;
-		}
-
-		if (!platform_msi_create_irq_domain(of_node_to_fwnode(np),
-						    &its_pmsi_domain_info,
-						    parent)) {
-			pr_err("%s: unable to create platform domain\n",
-			       np->full_name);
-			continue;
-		}
-
-		pr_info("Platform MSI: %s domain created\n", np->full_name);
+		its_pmsi_init_one(of_node_to_fwnode(np), np->full_name);
 	}
+}
 
+static int __init its_pmsi_init(void)
+{
+	its_pmsi_of_init();
 	return 0;
 }
 early_initcall(its_pmsi_init);
-- 
1.7.12.4

[PATCH v4 07/11] irqchip: gicv3-its: platform-msi: scan MADT to create platform msi domain

[Hanjun Guo]

From: Hanjun Guo <hanjun.guo@linaro.org>

With the introduction of its_pmsi_init_one(), we can add some code
on top for ACPI support of platform MSI.

We are scanning the MADT table to get the ITS entry(ies), then use
the information to create the platform msi domain for devices connect
to it, just like the PCI MSI for ITS did.

Signed-off-by: Hanjun Guo <hanjun.guo@linaro.org>
Tested-by: Sinan Kaya <okaya@codeaurora.org>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: Tomasz Nowicki <tn@semihalf.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
---
 drivers/irqchip/irq-gic-v3-its-platform-msi.c | 36 +++++++++++++++++++++++++++
 1 file changed, 36 insertions(+)

diff --git a/drivers/irqchip/irq-gic-v3-its-platform-msi.c b/drivers/irqchip/irq-gic-v3-its-platform-msi.c
index ff72704..0be0437 100644
--- a/drivers/irqchip/irq-gic-v3-its-platform-msi.c
+++ b/drivers/irqchip/irq-gic-v3-its-platform-msi.c
@@ -105,6 +105,41 @@ static int __init its_pmsi_init_one(struct fwnode_handle *fwnode,
 	return 0;
 }
 
+#ifdef CONFIG_ACPI
+static int __init
+its_pmsi_parse_madt(struct acpi_subtable_header *header,
+			const unsigned long end)
+{
+	struct acpi_madt_generic_translator *its_entry;
+	struct fwnode_handle *domain_handle;
+	const char *node_name;
+	int err = -ENXIO;
+
+	its_entry = (struct acpi_madt_generic_translator *)header;
+	node_name = kasprintf(GFP_KERNEL, "ITS@0x%lx",
+			      (long)its_entry->base_address);
+	domain_handle = iort_find_domain_token(its_entry->translation_id);
+	if (!domain_handle) {
+		pr_err("%s: Unable to locate ITS domain handle\n", node_name);
+		goto out;
+	}
+
+	err = its_pmsi_init_one(domain_handle, node_name);
+
+out:
+	kfree(node_name);
+	return err;
+}
+
+static void __init its_acpi_pmsi_init(void)
+{
+	acpi_table_parse_madt(ACPI_MADT_TYPE_GENERIC_TRANSLATOR,
+			      its_pmsi_parse_madt, 0);
+}
+#else
+static inline void its_acpi_pmsi_init(void) { }
+#endif
+
 static void __init its_pmsi_of_init(void)
 {
 	struct device_node *np;
@@ -121,6 +156,7 @@ static void __init its_pmsi_of_init(void)
 static int __init its_pmsi_init(void)
 {
 	its_pmsi_of_init();
+	its_acpi_pmsi_init();
 	return 0;
 }
 early_initcall(its_pmsi_init);
-- 
1.7.12.4

[PATCH v4 08/11] ACPI: ARM64: IORT: rework iort_node_get_id()

[Hanjun Guo]

From: Hanjun Guo <hanjun.guo@linaro.org>

iort_node_get_id() has two output, one is the mapped ids,
the other is the referenced parent node which is returned
from the function.

For now we need a API just return its parent node for
single mapping, so just update this function slightly then
reuse it later.

Signed-off-by: Hanjun Guo <hanjun.guo@linaro.org>
Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: Marc Zyngier <marc.zyngier@arm.com>
---
 drivers/acpi/arm64/iort.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/acpi/arm64/iort.c b/drivers/acpi/arm64/iort.c
index 7b78282a..788f445 100644
--- a/drivers/acpi/arm64/iort.c
+++ b/drivers/acpi/arm64/iort.c
@@ -347,7 +347,8 @@ struct acpi_iort_node *iort_node_get_id(struct acpi_iort_node *node,
 	if (map[index].flags & ACPI_IORT_ID_SINGLE_MAPPING) {
 		if (node->type == ACPI_IORT_NODE_NAMED_COMPONENT ||
 		    node->type == ACPI_IORT_NODE_PCI_ROOT_COMPLEX) {
-			*id_out = map[index].output_base;
+			if (id_out)
+				*id_out = map[index].output_base;
 			return parent;
 		}
 	}
-- 
1.7.12.4

[PATCH v4 09/11] ACPI: platform: setup MSI domain for ACPI based platform device

[Hanjun Guo]

From: Hanjun Guo <hanjun.guo@linaro.org>

With the platform msi domain created, we can set up the msi domain
for a platform device when it's probed.

In order to do that, we need to get the domain that the platform
device connecting to, so the iort_get_platform_device_domain() is
introduced to retrieve the domain from iort.

After the domain is retrieved, we need a proper way to set the
domain to paltform device, as some platform devices such as an
irqchip needs the msi irqdomain to be the interrupt parent domain,
we need to get irqdomain before platform device is probed but after
the platform device is allocated, so introduce a callback (pre_add_cb)
in pdevinfo to prepare firmware related information which is needed
for device probe, then set the msi domain in that callback.

Signed-off-by: Hanjun Guo <hanjun.guo@linaro.org>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: Rafael J. Wysocki <rjw@rjwysocki.net>
Cc: Greg KH <gregkh@linuxfoundation.org>
Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
---
 drivers/acpi/acpi_platform.c    | 11 +++++++++++
 drivers/acpi/arm64/iort.c       | 43 +++++++++++++++++++++++++++++++++++++++++
 drivers/base/platform.c         |  3 +++
 include/linux/acpi_iort.h       |  3 +++
 include/linux/platform_device.h |  3 +++
 5 files changed, 63 insertions(+)

diff --git a/drivers/acpi/acpi_platform.c b/drivers/acpi/acpi_platform.c
index b4c1a6a..5d8d61b4 100644
--- a/drivers/acpi/acpi_platform.c
+++ b/drivers/acpi/acpi_platform.c
@@ -12,6 +12,7 @@
  */
 
 #include <linux/acpi.h>
+#include <linux/acpi_iort.h>
 #include <linux/device.h>
 #include <linux/err.h>
 #include <linux/kernel.h>
@@ -48,6 +49,15 @@ static void acpi_platform_fill_resource(struct acpi_device *adev,
 }
 
 /**
+ * acpi_platform_pre_add_cb - callback before platform device is added, to
+ * prepare firmware related information which is needed for device probe
+ */
+static void acpi_platform_pre_add_cb(struct device *dev)
+{
+	acpi_configure_pmsi_domain(dev);
+}
+
+/**
  * acpi_create_platform_device - Create platform device for ACPI device node
  * @adev: ACPI device node to create a platform device for.
  * @properties: Optional collection of build-in properties.
@@ -109,6 +119,7 @@ struct platform_device *acpi_create_platform_device(struct acpi_device *adev,
 	pdevinfo.num_res = count;
 	pdevinfo.fwnode = acpi_fwnode_handle(adev);
 	pdevinfo.properties = properties;
+	pdevinfo.pre_add_cb = acpi_platform_pre_add_cb;
 
 	if (acpi_dma_supported(adev))
 		pdevinfo.dma_mask = DMA_BIT_MASK(32);
diff --git a/drivers/acpi/arm64/iort.c b/drivers/acpi/arm64/iort.c
index 788f445..8714f70 100644
--- a/drivers/acpi/arm64/iort.c
+++ b/drivers/acpi/arm64/iort.c
@@ -527,6 +527,49 @@ struct irq_domain *iort_get_device_domain(struct device *dev, u32 req_id)
 	return irq_find_matching_fwnode(handle, DOMAIN_BUS_PCI_MSI);
 }
 
+/**
+ * iort_get_platform_device_domain() - Find MSI domain related to a
+ * platform device
+ * @dev: the dev pointer associated with the platform device
+ *
+ * Returns: the MSI domain for this device, NULL otherwise
+ */
+static struct irq_domain *iort_get_platform_device_domain(struct device *dev)
+{
+	struct acpi_iort_node *node, *msi_parent;
+	struct fwnode_handle *iort_fwnode;
+	struct acpi_iort_its_group *its;
+
+	/* find its associated iort node */
+	node = iort_scan_node(ACPI_IORT_NODE_NAMED_COMPONENT,
+			      iort_match_node_callback, dev);
+	if (!node)
+		return NULL;
+
+	/* then find its msi parent node */
+	msi_parent = iort_node_get_id(node, NULL, IORT_MSI_TYPE, 0);
+	if (!msi_parent)
+		return NULL;
+
+	/* Move to ITS specific data */
+	its = (struct acpi_iort_its_group *)msi_parent->node_data;
+
+	iort_fwnode = iort_find_domain_token(its->identifiers[0]);
+	if (!iort_fwnode)
+		return NULL;
+
+	return irq_find_matching_fwnode(iort_fwnode, DOMAIN_BUS_PLATFORM_MSI);
+}
+
+void acpi_configure_pmsi_domain(struct device *dev)
+{
+	struct irq_domain *msi_domain;
+
+	msi_domain = iort_get_platform_device_domain(dev);
+	if (msi_domain)
+		dev_set_msi_domain(dev, msi_domain);
+}
+
 static int __get_pci_rid(struct pci_dev *pdev, u16 alias, void *data)
 {
 	u32 *rid = data;
diff --git a/drivers/base/platform.c b/drivers/base/platform.c
index c4af003..3e68f31 100644
--- a/drivers/base/platform.c
+++ b/drivers/base/platform.c
@@ -537,6 +537,9 @@ struct platform_device *platform_device_register_full(
 			goto err;
 	}
 
+	if (pdevinfo->pre_add_cb)
+		pdevinfo->pre_add_cb(&pdev->dev);
+
 	ret = platform_device_add(pdev);
 	if (ret) {
 err:
diff --git a/include/linux/acpi_iort.h b/include/linux/acpi_iort.h
index 3f717cc..21e33b6 100644
--- a/include/linux/acpi_iort.h
+++ b/include/linux/acpi_iort.h
@@ -37,6 +37,7 @@
 struct irq_domain *iort_get_device_domain(struct device *dev, u32 req_id);
 /* IOMMU interface */
 const struct iommu_ops *iort_iommu_configure(struct device *dev);
+void acpi_configure_pmsi_domain(struct device *dev);
 #else
 static inline void acpi_iort_init(void) { }
 static inline bool iort_node_match(u8 type) { return false; }
@@ -56,6 +57,8 @@ static inline int iort_pmsi_get_dev_id(struct device *dev, u32 *dev_id)
 static inline
 const struct iommu_ops *iort_iommu_configure(struct device *dev)
 { return NULL; }
+
+static inline void acpi_configure_pmsi_domain(struct device *dev) { }
 #endif
 
 #define IORT_ACPI_DECLARE(name, table_id, fn)		\
diff --git a/include/linux/platform_device.h b/include/linux/platform_device.h
index 98c2a7c..280d366fb 100644
--- a/include/linux/platform_device.h
+++ b/include/linux/platform_device.h
@@ -74,6 +74,9 @@ struct platform_device_info {
 		u64 dma_mask;
 
 		struct property_entry *properties;
+
+		/* preparation callback before the platform device is added */
+		void (*pre_add_cb)(struct device *);
 };
 extern struct platform_device *platform_device_register_full(
 		const struct platform_device_info *pdevinfo);
-- 
1.7.12.4

[PATCH v4 10/11] ACPI: ARM64: IORT: rework iort_node_get_id() for NC->SMMU->ITS case

[Hanjun Guo]

From: Hanjun Guo <hanjun.guo@linaro.org>

iort_node_get_id() for now only support NC(named componant)->SMMU
or NC->ITS cases, we also have other device topology such NC->
SMMU->ITS, so rework iort_node_get_id() for those cases.

Signed-off-by: Hanjun Guo <hanjun.guo@linaro.org>
Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
---
 drivers/acpi/arm64/iort.c | 59 ++++++++++++++++++++++++++---------------------
 1 file changed, 33 insertions(+), 26 deletions(-)

diff --git a/drivers/acpi/arm64/iort.c b/drivers/acpi/arm64/iort.c
index 8714f70..2e2d231 100644
--- a/drivers/acpi/arm64/iort.c
+++ b/drivers/acpi/arm64/iort.c
@@ -292,22 +292,28 @@ static acpi_status iort_match_node_callback(struct acpi_iort_node *node,
 	return status;
 }
 
-static int iort_id_map(struct acpi_iort_id_mapping *map, u8 type, u32 rid_in,
-		       u32 *rid_out)
+static int iort_id_single_map(struct acpi_iort_id_mapping *map, u8 type,
+			      u32 *rid_out)
 {
 	/* Single mapping does not care for input id */
 	if (map->flags & ACPI_IORT_ID_SINGLE_MAPPING) {
 		if (type == ACPI_IORT_NODE_NAMED_COMPONENT ||
 		    type == ACPI_IORT_NODE_PCI_ROOT_COMPLEX) {
-			*rid_out = map->output_base;
+			if (rid_out)
+				*rid_out = map->output_base;
 			return 0;
 		}
 
 		pr_warn(FW_BUG "[map %p] SINGLE MAPPING flag not allowed for node type %d, skipping ID map\n",
 			map, type);
-		return -ENXIO;
 	}
 
+	return -ENXIO;
+}
+
+static int iort_id_map(struct acpi_iort_id_mapping *map, u8 type, u32 rid_in,
+		       u32 *rid_out)
+{
 	if (rid_in < map->input_base ||
 	    (rid_in >= map->input_base + map->id_count))
 		return -ENXIO;
@@ -324,33 +330,34 @@ struct acpi_iort_node *iort_node_get_id(struct acpi_iort_node *node,
 	struct acpi_iort_node *parent;
 	struct acpi_iort_id_mapping *map;
 
-	if (!node->mapping_offset || !node->mapping_count ||
-				     index >= node->mapping_count)
-		return NULL;
-
-	map = ACPI_ADD_PTR(struct acpi_iort_id_mapping, node,
-			   node->mapping_offset);
+	while (node) {
+		if (!node->mapping_offset || !node->mapping_count ||
+					     index >= node->mapping_count)
+			return NULL;
 
-	/* Firmware bug! */
-	if (!map->output_reference) {
-		pr_err(FW_BUG "[node %p type %d] ID map has NULL parent reference\n",
-		       node, node->type);
-		return NULL;
-	}
+		map = ACPI_ADD_PTR(struct acpi_iort_id_mapping, node,
+				   node->mapping_offset);
 
-	parent = ACPI_ADD_PTR(struct acpi_iort_node, iort_table,
-			       map->output_reference);
+		/* Firmware bug! */
+		if (!map->output_reference) {
+			pr_err(FW_BUG "[node %p type %d] ID map has NULL parent reference\n",
+			       node, node->type);
+			return NULL;
+		}
 
-	if (!(IORT_TYPE_MASK(parent->type) & type_mask))
-		return NULL;
+		parent = ACPI_ADD_PTR(struct acpi_iort_node, iort_table,
+				      map->output_reference);
 
-	if (map[index].flags & ACPI_IORT_ID_SINGLE_MAPPING) {
-		if (node->type == ACPI_IORT_NODE_NAMED_COMPONENT ||
-		    node->type == ACPI_IORT_NODE_PCI_ROOT_COMPLEX) {
-			if (id_out)
-				*id_out = map[index].output_base;
-			return parent;
+		/* go upstream to find its parent */
+		if (!(IORT_TYPE_MASK(parent->type) & type_mask)) {
+			node = parent;
+			continue;
 		}
+
+		if (iort_id_single_map(&map[index], node->type, id_out))
+			break;
+
+		return parent;
 	}
 
 	return NULL;
-- 
1.7.12.4

[PATCH v4 11/11] msi: platform: make platform_msi_create_device_domain() ACPI aware

[Hanjun Guo]

From: Hanjun Guo <hanjun.guo@linaro.org>

With the platform msi domain created for ITS, irqchip such as
mbi-gen connecting ITS, which needs ctreate its own irqdomain.

Fortunately with the platform msi support upstreamed by Marc,
we just need to add minor code to make it run properly.

platform_msi_create_device_domain() is almost ready for ACPI use
except of_node_to_fwnode() is for dt only, make it ACPI aware then
things will work in both DTS and ACPI.

Signed-off-by: Hanjun Guo <hanjun.guo@linaro.org>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: Greg KH <gregkh@linuxfoundation.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Greg KH <gregkh@linuxfoundation.org>
---
 drivers/base/platform-msi.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

diff --git a/drivers/base/platform-msi.c b/drivers/base/platform-msi.c
index be6a599..035ca3b 100644
--- a/drivers/base/platform-msi.c
+++ b/drivers/base/platform-msi.c
@@ -345,8 +345,7 @@ struct irq_domain *
 
 	data->host_data = host_data;
 	domain = irq_domain_create_hierarchy(dev->msi_domain, 0, nvec,
-					     of_node_to_fwnode(dev->of_node),
-					     ops, data);
+					     dev->fwnode, ops, data);
 	if (!domain)
 		goto free_priv;
 
-- 
1.7.12.4