* [PATCH v2 0/2] mmc: host: s3cmci: add device tree support @ 2016-12-09 13:14 Sergio Prado 2016-12-09 13:14 ` [PATCH v2 1/2] dt-bindings: mmc: add DT binding for S3C24XX MMC/SD/SDIO controller Sergio Prado 2016-12-09 13:14 ` [PATCH v2 2/2] mmc: host: s3cmci: allow probing from device tree Sergio Prado 0 siblings, 2 replies; 4+ messages in thread From: Sergio Prado @ 2016-12-09 13:14 UTC (permalink / raw) To: ulf.hansson, robh+dt, mark.rutland, linux-mmc, devicetree, linux-kernel, ben-linux, linux-arm-kernel Cc: Sergio Prado This series adds support for configuring Samsung's S3C24XX MMC/SD/SDIO controller via device tree. Tested on FriendlyARM mini2440, based on s3c2440 SoC. Changes since v1: - pinctrl description removed from DT binding - unit and label on DT binding renamed to mmc Sergio Prado (2): dt-bindings: mmc: add DT binding for S3C24XX MMC/SD/SDIO controller mmc: host: s3cmci: allow probing from device tree .../devicetree/bindings/mmc/samsung,s3cmci.txt | 34 +++++ drivers/mmc/host/s3cmci.c | 155 +++++++++++++++++---- 2 files changed, 165 insertions(+), 24 deletions(-) create mode 100644 Documentation/devicetree/bindings/mmc/samsung,s3cmci.txt -- 1.9.1 ^ permalink raw reply [flat|nested] 4+ messages in thread
* [PATCH v2 1/2] dt-bindings: mmc: add DT binding for S3C24XX MMC/SD/SDIO controller 2016-12-09 13:14 [PATCH v2 0/2] mmc: host: s3cmci: add device tree support Sergio Prado @ 2016-12-09 13:14 ` Sergio Prado 2016-12-09 13:14 ` [PATCH v2 2/2] mmc: host: s3cmci: allow probing from device tree Sergio Prado 1 sibling, 0 replies; 4+ messages in thread From: Sergio Prado @ 2016-12-09 13:14 UTC (permalink / raw) To: ulf.hansson, robh+dt, mark.rutland, linux-mmc, devicetree, linux-kernel, ben-linux, linux-arm-kernel Cc: Sergio Prado Adds the device tree bindings description for Samsung S3C24XX MMC/SD/SDIO controller, used as a connectivity interface with external MMC, SD and SDIO storage mediums. Signed-off-by: Sergio Prado <sergio.prado@e-labworks.com> Acked-by: Rob Herring <robh@kernel.org> --- .../devicetree/bindings/mmc/samsung,s3cmci.txt | 34 ++++++++++++++++++++++ 1 file changed, 34 insertions(+) create mode 100644 Documentation/devicetree/bindings/mmc/samsung,s3cmci.txt diff --git a/Documentation/devicetree/bindings/mmc/samsung,s3cmci.txt b/Documentation/devicetree/bindings/mmc/samsung,s3cmci.txt new file mode 100644 index 000000000000..d09dbf4b3824 --- /dev/null +++ b/Documentation/devicetree/bindings/mmc/samsung,s3cmci.txt @@ -0,0 +1,34 @@ +* Samsung's S3C24XX MMC/SD/SDIO controller device tree bindings + +Samsung's S3C24XX MMC/SD/SDIO controller is used as a connectivity interface +with external MMC, SD and SDIO storage mediums. + +This file documents differences between the core mmc properties described by +mmc.txt and the properties used by the Samsung S3C24XX MMC/SD/SDIO controller +implementation. + +Required SoC Specific Properties: +- compatible: should be one of the following + - "samsung,s3c2410-sdi": for controllers compatible with s3c2410 + - "samsung,s3c2412-sdi": for controllers compatible with s3c2412 + - "samsung,s3c2440-sdi": for controllers compatible with s3c2440 +- clocks: Should reference the controller clock +- clock-names: Should contain "sdi" + +Example: + mmc0: mmc@5a000000 { + compatible = "samsung,s3c2440-sdi"; + pinctrl-names = "default"; + pinctrl-0 = <&sdi_pins>; + reg = <0x5a000000 0x100000>; + interrupts = <0 0 21 3>; + clocks = <&clocks PCLK_SDI>; + clock-names = "sdi"; + bus-width = <4>; + cd-gpios = <&gpg 8 GPIO_ACTIVE_LOW>; + wp-gpios = <&gph 8 GPIO_ACTIVE_LOW>; + }; + + Note: This example shows both SoC specific and board specific properties + in a single device node. The properties can be actually be separated + into SoC specific node and board specific node. -- 1.9.1 ^ permalink raw reply related [flat|nested] 4+ messages in thread
* [PATCH v2 2/2] mmc: host: s3cmci: allow probing from device tree 2016-12-09 13:14 [PATCH v2 0/2] mmc: host: s3cmci: add device tree support Sergio Prado 2016-12-09 13:14 ` [PATCH v2 1/2] dt-bindings: mmc: add DT binding for S3C24XX MMC/SD/SDIO controller Sergio Prado @ 2016-12-09 13:14 ` Sergio Prado 2016-12-29 11:40 ` Ulf Hansson 1 sibling, 1 reply; 4+ messages in thread From: Sergio Prado @ 2016-12-09 13:14 UTC (permalink / raw) To: ulf.hansson, robh+dt, mark.rutland, linux-mmc, devicetree, linux-kernel, ben-linux, linux-arm-kernel Cc: Sergio Prado Allows configuring Samsung S3C24XX MMC/SD/SDIO controller using a device tree. Signed-off-by: Sergio Prado <sergio.prado@e-labworks.com> --- drivers/mmc/host/s3cmci.c | 155 +++++++++++++++++++++++++++++++++++++++------- 1 file changed, 131 insertions(+), 24 deletions(-) diff --git a/drivers/mmc/host/s3cmci.c b/drivers/mmc/host/s3cmci.c index 932a4b1fed33..bfeb90e8ffee 100644 --- a/drivers/mmc/host/s3cmci.c +++ b/drivers/mmc/host/s3cmci.c @@ -23,6 +23,9 @@ #include <linux/gpio.h> #include <linux/irq.h> #include <linux/io.h> +#include <linux/of.h> +#include <linux/of_device.h> +#include <linux/of_gpio.h> #include <plat/gpio-cfg.h> #include <mach/dma.h> @@ -127,6 +130,22 @@ enum dbg_channels { dbg_conf = (1 << 8), }; +struct s3cmci_drv_data { + int is2440; +}; + +static const struct s3cmci_drv_data s3c2410_s3cmci_drv_data = { + .is2440 = 0, +}; + +static const struct s3cmci_drv_data s3c2412_s3cmci_drv_data = { + .is2440 = 1, +}; + +static const struct s3cmci_drv_data s3c2440_s3cmci_drv_data = { + .is2440 = 1, +}; + static const int dbgmap_err = dbg_fail; static const int dbgmap_info = dbg_info | dbg_conf; static const int dbgmap_debug = dbg_err | dbg_debug; @@ -1241,8 +1260,9 @@ static void s3cmci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios) case MMC_POWER_ON: case MMC_POWER_UP: /* Configure GPE5...GPE10 pins in SD mode */ - s3c_gpio_cfgall_range(S3C2410_GPE(5), 6, S3C_GPIO_SFN(2), - S3C_GPIO_PULL_NONE); + if (!host->pdev->dev.of_node) + s3c_gpio_cfgall_range(S3C2410_GPE(5), 6, S3C_GPIO_SFN(2), + S3C_GPIO_PULL_NONE); if (host->pdata->set_power) host->pdata->set_power(ios->power_mode, ios->vdd); @@ -1254,7 +1274,8 @@ static void s3cmci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios) case MMC_POWER_OFF: default: - gpio_direction_output(S3C2410_GPE(5), 0); + if (!host->pdev->dev.of_node) + gpio_direction_output(S3C2410_GPE(5), 0); if (host->is2440) mci_con |= S3C2440_SDICON_SDRESET; @@ -1544,21 +1565,12 @@ static inline void s3cmci_debugfs_remove(struct s3cmci_host *host) { } #endif /* CONFIG_DEBUG_FS */ -static int s3cmci_probe(struct platform_device *pdev) +static int s3cmci_probe_pdata(struct s3cmci_host *host) { - struct s3cmci_host *host; - struct mmc_host *mmc; - int ret; - int is2440; - int i; + struct platform_device *pdev = host->pdev; + int i, ret; - is2440 = platform_get_device_id(pdev)->driver_data; - - mmc = mmc_alloc_host(sizeof(struct s3cmci_host), &pdev->dev); - if (!mmc) { - ret = -ENOMEM; - goto probe_out; - } + host->is2440 = platform_get_device_id(pdev)->driver_data; for (i = S3C2410_GPE(5); i <= S3C2410_GPE(10); i++) { ret = gpio_request(i, dev_name(&pdev->dev)); @@ -1568,14 +1580,90 @@ static int s3cmci_probe(struct platform_device *pdev) for (i--; i >= S3C2410_GPE(5); i--) gpio_free(i); - goto probe_free_host; + return ret; } } + return 0; +} + +static int s3cmci_probe_dt(struct s3cmci_host *host) +{ + struct platform_device *pdev = host->pdev; + struct s3c24xx_mci_pdata *pdata; + const struct s3cmci_drv_data *drvdata; + struct mmc_host *mmc = host->mmc; + int gpio, ret; + + drvdata = of_device_get_match_data(&pdev->dev); + if (!drvdata) + return -ENODEV; + + host->is2440 = drvdata->is2440; + + ret = mmc_of_parse(mmc); + if (ret) + return ret; + + pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL); + if (!pdata) + return -ENOMEM; + + pdata->ocr_avail = mmc->ocr_avail; + + if (mmc->caps2 & MMC_CAP2_NO_WRITE_PROTECT) + pdata->no_wprotect = 1; + + if (mmc->caps & MMC_CAP_NEEDS_POLL) + pdata->no_detect = 1; + + if (mmc->caps2 & MMC_CAP2_RO_ACTIVE_HIGH) + pdata->wprotect_invert = 1; + + if (mmc->caps2 & MMC_CAP2_CD_ACTIVE_HIGH) + pdata->detect_invert = 1; + + gpio = of_get_named_gpio(pdev->dev.of_node, "cd-gpios", 0); + if (gpio_is_valid(gpio)) { + pdata->gpio_detect = gpio; + gpio_free(gpio); + } + + gpio = of_get_named_gpio(pdev->dev.of_node, "wp-gpios", 0); + if (gpio_is_valid(gpio)) { + pdata->gpio_wprotect = gpio; + gpio_free(gpio); + } + + pdev->dev.platform_data = pdata; + + return 0; +} + +static int s3cmci_probe(struct platform_device *pdev) +{ + struct s3cmci_host *host; + struct mmc_host *mmc; + int ret; + int i; + + mmc = mmc_alloc_host(sizeof(struct s3cmci_host), &pdev->dev); + if (!mmc) { + ret = -ENOMEM; + goto probe_out; + } + host = mmc_priv(mmc); host->mmc = mmc; host->pdev = pdev; - host->is2440 = is2440; + + if (pdev->dev.of_node) + ret = s3cmci_probe_dt(host); + else + ret = s3cmci_probe_pdata(host); + + if (ret) + goto probe_free_host; host->pdata = pdev->dev.platform_data; if (!host->pdata) { @@ -1586,7 +1674,7 @@ static int s3cmci_probe(struct platform_device *pdev) spin_lock_init(&host->complete_lock); tasklet_init(&host->pio_tasklet, pio_tasklet, (unsigned long) host); - if (is2440) { + if (host->is2440) { host->sdiimsk = S3C2440_SDIIMSK; host->sdidata = S3C2440_SDIDATA; host->clk_div = 1; @@ -1789,8 +1877,9 @@ static int s3cmci_probe(struct platform_device *pdev) release_mem_region(host->mem->start, resource_size(host->mem)); probe_free_gpio: - for (i = S3C2410_GPE(5); i <= S3C2410_GPE(10); i++) - gpio_free(i); + if (!pdev->dev.of_node) + for (i = S3C2410_GPE(5); i <= S3C2410_GPE(10); i++) + gpio_free(i); probe_free_host: mmc_free_host(mmc); @@ -1837,9 +1926,9 @@ static int s3cmci_remove(struct platform_device *pdev) if (!pd->no_detect) gpio_free(pd->gpio_detect); - for (i = S3C2410_GPE(5); i <= S3C2410_GPE(10); i++) - gpio_free(i); - + if (!pdev->dev.of_node) + for (i = S3C2410_GPE(5); i <= S3C2410_GPE(10); i++) + gpio_free(i); iounmap(host->base); release_mem_region(host->mem->start, resource_size(host->mem)); @@ -1848,6 +1937,23 @@ static int s3cmci_remove(struct platform_device *pdev) return 0; } +static const struct of_device_id s3cmci_dt_match[] = { + { + .compatible = "samsung,s3c2410-sdi", + .data = &s3c2410_s3cmci_drv_data, + }, + { + .compatible = "samsung,s3c2412-sdi", + .data = &s3c2412_s3cmci_drv_data, + }, + { + .compatible = "samsung,s3c2440-sdi", + .data = &s3c2440_s3cmci_drv_data, + }, + { /* sentinel */ }, +}; +MODULE_DEVICE_TABLE(of, sdhci_s3c_dt_match); + static const struct platform_device_id s3cmci_driver_ids[] = { { .name = "s3c2410-sdi", @@ -1867,6 +1973,7 @@ static int s3cmci_remove(struct platform_device *pdev) static struct platform_driver s3cmci_driver = { .driver = { .name = "s3c-sdi", + .of_match_table = s3cmci_dt_match, }, .id_table = s3cmci_driver_ids, .probe = s3cmci_probe, -- 1.9.1 ^ permalink raw reply related [flat|nested] 4+ messages in thread
* Re: [PATCH v2 2/2] mmc: host: s3cmci: allow probing from device tree 2016-12-09 13:14 ` [PATCH v2 2/2] mmc: host: s3cmci: allow probing from device tree Sergio Prado @ 2016-12-29 11:40 ` Ulf Hansson 0 siblings, 0 replies; 4+ messages in thread From: Ulf Hansson @ 2016-12-29 11:40 UTC (permalink / raw) To: Sergio Prado Cc: Rob Herring, Mark Rutland, linux-mmc, devicetree, linux-kernel, Ben Dooks, linux-arm-kernel On 9 December 2016 at 14:14, Sergio Prado <sergio.prado@e-labworks.com> wrote: > Allows configuring Samsung S3C24XX MMC/SD/SDIO controller using a device > tree. > > Signed-off-by: Sergio Prado <sergio.prado@e-labworks.com> > --- > drivers/mmc/host/s3cmci.c | 155 +++++++++++++++++++++++++++++++++++++++------- > 1 file changed, 131 insertions(+), 24 deletions(-) > > diff --git a/drivers/mmc/host/s3cmci.c b/drivers/mmc/host/s3cmci.c > index 932a4b1fed33..bfeb90e8ffee 100644 > --- a/drivers/mmc/host/s3cmci.c > +++ b/drivers/mmc/host/s3cmci.c > @@ -23,6 +23,9 @@ > #include <linux/gpio.h> > #include <linux/irq.h> > #include <linux/io.h> > +#include <linux/of.h> > +#include <linux/of_device.h> > +#include <linux/of_gpio.h> > > #include <plat/gpio-cfg.h> > #include <mach/dma.h> > @@ -127,6 +130,22 @@ enum dbg_channels { > dbg_conf = (1 << 8), > }; > > +struct s3cmci_drv_data { > + int is2440; This doesn't say much. Please use a more descriptive variable name and rename the struct to perhaps "variant_data", because I guess that is what this is? > +}; > + > +static const struct s3cmci_drv_data s3c2410_s3cmci_drv_data = { > + .is2440 = 0, > +}; > + > +static const struct s3cmci_drv_data s3c2412_s3cmci_drv_data = { > + .is2440 = 1, > +}; > + > +static const struct s3cmci_drv_data s3c2440_s3cmci_drv_data = { > + .is2440 = 1, > +}; > + > static const int dbgmap_err = dbg_fail; > static const int dbgmap_info = dbg_info | dbg_conf; > static const int dbgmap_debug = dbg_err | dbg_debug; > @@ -1241,8 +1260,9 @@ static void s3cmci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios) > case MMC_POWER_ON: > case MMC_POWER_UP: > /* Configure GPE5...GPE10 pins in SD mode */ > - s3c_gpio_cfgall_range(S3C2410_GPE(5), 6, S3C_GPIO_SFN(2), > - S3C_GPIO_PULL_NONE); > + if (!host->pdev->dev.of_node) > + s3c_gpio_cfgall_range(S3C2410_GPE(5), 6, S3C_GPIO_SFN(2), > + S3C_GPIO_PULL_NONE); > > if (host->pdata->set_power) > host->pdata->set_power(ios->power_mode, ios->vdd); > @@ -1254,7 +1274,8 @@ static void s3cmci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios) > > case MMC_POWER_OFF: > default: > - gpio_direction_output(S3C2410_GPE(5), 0); > + if (!host->pdev->dev.of_node) > + gpio_direction_output(S3C2410_GPE(5), 0); > > if (host->is2440) > mci_con |= S3C2440_SDICON_SDRESET; > @@ -1544,21 +1565,12 @@ static inline void s3cmci_debugfs_remove(struct s3cmci_host *host) { } > > #endif /* CONFIG_DEBUG_FS */ > > -static int s3cmci_probe(struct platform_device *pdev) > +static int s3cmci_probe_pdata(struct s3cmci_host *host) > { > - struct s3cmci_host *host; > - struct mmc_host *mmc; > - int ret; > - int is2440; > - int i; > + struct platform_device *pdev = host->pdev; > + int i, ret; > > - is2440 = platform_get_device_id(pdev)->driver_data; > - > - mmc = mmc_alloc_host(sizeof(struct s3cmci_host), &pdev->dev); > - if (!mmc) { > - ret = -ENOMEM; > - goto probe_out; > - } > + host->is2440 = platform_get_device_id(pdev)->driver_data; > > for (i = S3C2410_GPE(5); i <= S3C2410_GPE(10); i++) { > ret = gpio_request(i, dev_name(&pdev->dev)); > @@ -1568,14 +1580,90 @@ static int s3cmci_probe(struct platform_device *pdev) > for (i--; i >= S3C2410_GPE(5); i--) > gpio_free(i); > > - goto probe_free_host; > + return ret; > } > } > > + return 0; > +} > + > +static int s3cmci_probe_dt(struct s3cmci_host *host) > +{ > + struct platform_device *pdev = host->pdev; > + struct s3c24xx_mci_pdata *pdata; > + const struct s3cmci_drv_data *drvdata; > + struct mmc_host *mmc = host->mmc; > + int gpio, ret; > + > + drvdata = of_device_get_match_data(&pdev->dev); > + if (!drvdata) > + return -ENODEV; > + > + host->is2440 = drvdata->is2440; Instead of copying only the member, perhaps assign a host->variant pointer to the drvdata instead, as that allows to extend the information for the variant to cover more things than only "is2440", while going forward. In other words: host->variant = of_device_get_match_data(&pdev->dev); > + > + ret = mmc_of_parse(mmc); > + if (ret) > + return ret; > + > + pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL); > + if (!pdata) > + return -ENOMEM; > + > + pdata->ocr_avail = mmc->ocr_avail; > + > + if (mmc->caps2 & MMC_CAP2_NO_WRITE_PROTECT) > + pdata->no_wprotect = 1; > + > + if (mmc->caps & MMC_CAP_NEEDS_POLL) > + pdata->no_detect = 1; > + > + if (mmc->caps2 & MMC_CAP2_RO_ACTIVE_HIGH) > + pdata->wprotect_invert = 1; > + > + if (mmc->caps2 & MMC_CAP2_CD_ACTIVE_HIGH) > + pdata->detect_invert = 1; > + > + gpio = of_get_named_gpio(pdev->dev.of_node, "cd-gpios", 0); This should already be covered via mmc_of_parse(). > + if (gpio_is_valid(gpio)) { > + pdata->gpio_detect = gpio; > + gpio_free(gpio); > + } > + > + gpio = of_get_named_gpio(pdev->dev.of_node, "wp-gpios", 0); This should already be covered via mmc_of_parse(). > + if (gpio_is_valid(gpio)) { > + pdata->gpio_wprotect = gpio; > + gpio_free(gpio); > + } > + > + pdev->dev.platform_data = pdata; > + > + return 0; > +} > + > +static int s3cmci_probe(struct platform_device *pdev) > +{ > + struct s3cmci_host *host; > + struct mmc_host *mmc; > + int ret; > + int i; > + > + mmc = mmc_alloc_host(sizeof(struct s3cmci_host), &pdev->dev); > + if (!mmc) { > + ret = -ENOMEM; > + goto probe_out; > + } > + > host = mmc_priv(mmc); > host->mmc = mmc; > host->pdev = pdev; > - host->is2440 = is2440; > + > + if (pdev->dev.of_node) > + ret = s3cmci_probe_dt(host); > + else > + ret = s3cmci_probe_pdata(host); > + > + if (ret) > + goto probe_free_host; > > host->pdata = pdev->dev.platform_data; > if (!host->pdata) { > @@ -1586,7 +1674,7 @@ static int s3cmci_probe(struct platform_device *pdev) > spin_lock_init(&host->complete_lock); > tasklet_init(&host->pio_tasklet, pio_tasklet, (unsigned long) host); > > - if (is2440) { > + if (host->is2440) { > host->sdiimsk = S3C2440_SDIIMSK; > host->sdidata = S3C2440_SDIDATA; > host->clk_div = 1; > @@ -1789,8 +1877,9 @@ static int s3cmci_probe(struct platform_device *pdev) > release_mem_region(host->mem->start, resource_size(host->mem)); > > probe_free_gpio: > - for (i = S3C2410_GPE(5); i <= S3C2410_GPE(10); i++) > - gpio_free(i); > + if (!pdev->dev.of_node) > + for (i = S3C2410_GPE(5); i <= S3C2410_GPE(10); i++) > + gpio_free(i); > > probe_free_host: > mmc_free_host(mmc); > @@ -1837,9 +1926,9 @@ static int s3cmci_remove(struct platform_device *pdev) > if (!pd->no_detect) > gpio_free(pd->gpio_detect); > > - for (i = S3C2410_GPE(5); i <= S3C2410_GPE(10); i++) > - gpio_free(i); > - > + if (!pdev->dev.of_node) > + for (i = S3C2410_GPE(5); i <= S3C2410_GPE(10); i++) > + gpio_free(i); > > iounmap(host->base); > release_mem_region(host->mem->start, resource_size(host->mem)); > @@ -1848,6 +1937,23 @@ static int s3cmci_remove(struct platform_device *pdev) > return 0; > } > > +static const struct of_device_id s3cmci_dt_match[] = { > + { > + .compatible = "samsung,s3c2410-sdi", > + .data = &s3c2410_s3cmci_drv_data, > + }, > + { > + .compatible = "samsung,s3c2412-sdi", > + .data = &s3c2412_s3cmci_drv_data, > + }, > + { > + .compatible = "samsung,s3c2440-sdi", > + .data = &s3c2440_s3cmci_drv_data, > + }, > + { /* sentinel */ }, > +}; > +MODULE_DEVICE_TABLE(of, sdhci_s3c_dt_match); > + > static const struct platform_device_id s3cmci_driver_ids[] = { > { > .name = "s3c2410-sdi", > @@ -1867,6 +1973,7 @@ static int s3cmci_remove(struct platform_device *pdev) > static struct platform_driver s3cmci_driver = { > .driver = { > .name = "s3c-sdi", > + .of_match_table = s3cmci_dt_match, > }, > .id_table = s3cmci_driver_ids, > .probe = s3cmci_probe, > -- > 1.9.1 > Kind regards Uffe ^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2016-12-29 11:41 UTC | newest] Thread overview: 4+ messages (download: mbox.gz / follow: Atom feed) -- links below jump to the message on this page -- 2016-12-09 13:14 [PATCH v2 0/2] mmc: host: s3cmci: add device tree support Sergio Prado 2016-12-09 13:14 ` [PATCH v2 1/2] dt-bindings: mmc: add DT binding for S3C24XX MMC/SD/SDIO controller Sergio Prado 2016-12-09 13:14 ` [PATCH v2 2/2] mmc: host: s3cmci: allow probing from device tree Sergio Prado 2016-12-29 11:40 ` Ulf Hansson
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).