linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Peter Rosin <peda@axentia.se>
To: linux-kernel@vger.kernel.org
Cc: Peter Rosin <peda@axentia.se>, Sebastian Reichel <sre@kernel.org>,
	Rob Herring <robh+dt@kernel.org>,
	Mark Rutland <mark.rutland@arm.com>,
	linux-pm@vger.kernel.org, devicetree@vger.kernel.org
Subject: [PATCH 2/3] power: supply: bq24735-charger: optionally poll the ac-detect gpio
Date: Mon, 12 Dec 2016 12:00:23 +0100	[thread overview]
Message-ID: <1481540424-19293-3-git-send-email-peda@axentia.se> (raw)
In-Reply-To: <1481540424-19293-1-git-send-email-peda@axentia.se>

If the ac-detect gpio does not support interrupts, provide a fallback
to poll the gpio at a configurable interval.

Signed-off-by: Peter Rosin <peda@axentia.se>
---
 .../bindings/power/supply/ti,bq24735.txt           |  2 +
 drivers/power/supply/bq24735-charger.c             | 50 +++++++++++++++++++---
 2 files changed, 47 insertions(+), 5 deletions(-)

diff --git a/Documentation/devicetree/bindings/power/supply/ti,bq24735.txt b/Documentation/devicetree/bindings/power/supply/ti,bq24735.txt
index 3bf55757ceec..59c4dde589cf 100644
--- a/Documentation/devicetree/bindings/power/supply/ti,bq24735.txt
+++ b/Documentation/devicetree/bindings/power/supply/ti,bq24735.txt
@@ -25,6 +25,8 @@ Optional properties :
  - ti,external-control : Indicates that the charger is configured externally
    and that the host should not attempt to enable/disable charging or set the
    charge voltage/current.
+ - ti,poll-interval-ms : In case there is no interrupts specified, poll AC
+   presense on the ti,ac-detect-gpios GPIO with this interval.
 
 Example:
 
diff --git a/drivers/power/supply/bq24735-charger.c b/drivers/power/supply/bq24735-charger.c
index 1d5c9206e0ed..3765806d5d46 100644
--- a/drivers/power/supply/bq24735-charger.c
+++ b/drivers/power/supply/bq24735-charger.c
@@ -50,6 +50,8 @@ struct bq24735 {
 	struct bq24735_platform		*pdata;
 	struct mutex			lock;
 	struct gpio_desc		*status_gpio;
+	struct delayed_work		poll;
+	u32				poll_interval;
 	bool				charging;
 };
 
@@ -209,11 +211,8 @@ static int bq24735_charger_is_charging(struct bq24735 *charger)
 	return !(ret & BQ24735_CHG_OPT_CHARGE_DISABLE);
 }
 
-static irqreturn_t bq24735_charger_isr(int irq, void *devid)
+static void bq24735_update(struct bq24735 *charger)
 {
-	struct power_supply *psy = devid;
-	struct bq24735 *charger = to_bq24735(psy);
-
 	mutex_lock(&charger->lock);
 
 	if (charger->charging && bq24735_charger_is_present(charger))
@@ -223,11 +222,29 @@ static irqreturn_t bq24735_charger_isr(int irq, void *devid)
 
 	mutex_unlock(&charger->lock);
 
-	power_supply_changed(psy);
+	power_supply_changed(charger->charger);
+}
+
+static irqreturn_t bq24735_charger_isr(int irq, void *devid)
+{
+	struct power_supply *psy = devid;
+	struct bq24735 *charger = to_bq24735(psy);
+
+	bq24735_update(charger);
 
 	return IRQ_HANDLED;
 }
 
+static void bq24735_poll(struct work_struct *work)
+{
+	struct bq24735 *charger = container_of(work, struct bq24735, poll.work);
+
+	bq24735_update(charger);
+
+	schedule_delayed_work(&charger->poll,
+			      msecs_to_jiffies(charger->poll_interval));
+}
+
 static int bq24735_charger_get_property(struct power_supply *psy,
 					enum power_supply_property psp,
 					union power_supply_propval *val)
@@ -455,11 +472,33 @@ static int bq24735_charger_probe(struct i2c_client *client,
 				client->irq, ret);
 			return ret;
 		}
+	} else if (charger->status_gpio) {
+		ret = of_property_read_u32(client->dev.of_node,
+					   "ti,poll-interval-ms",
+					   &charger->poll_interval);
+		if (ret)
+			return 0;
+		if (!charger->poll_interval)
+			return 0;
+
+		INIT_DELAYED_WORK(&charger->poll, bq24735_poll);
+		schedule_delayed_work(&charger->poll,
+				      msecs_to_jiffies(charger->poll_interval));
 	}
 
 	return 0;
 }
 
+static int bq24735_charger_remove(struct i2c_client *client)
+{
+	struct bq24735 *charger = i2c_get_clientdata(client);
+
+	if (charger->poll_interval)
+		cancel_delayed_work_sync(&charger->poll);
+
+	return 0;
+}
+
 static const struct i2c_device_id bq24735_charger_id[] = {
 	{ "bq24735-charger", 0 },
 	{}
@@ -478,6 +517,7 @@ static struct i2c_driver bq24735_charger_driver = {
 		.of_match_table = bq24735_match_ids,
 	},
 	.probe = bq24735_charger_probe,
+	.remove = bq24735_charger_remove,
 	.id_table = bq24735_charger_id,
 };
 
-- 
2.1.4

  parent reply	other threads:[~2016-12-12 11:01 UTC|newest]

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-12-12 11:00 [PATCH 0/3] bq24735-charger: allow gpio polling and sharing Peter Rosin
2016-12-12 11:00 ` [PATCH 1/3] power: supply: bq24735-charger: simplify register update to stop charging Peter Rosin
2016-12-12 11:00 ` Peter Rosin [this message]
2016-12-13 19:30   ` [PATCH 2/3] power: supply: bq24735-charger: optionally poll the ac-detect gpio Rob Herring
2016-12-12 11:00 ` [PATCH 3/3] power: supply: bq24735-charger: allow chargers to share " Peter Rosin
2016-12-12 11:39   ` Peter Rosin

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1481540424-19293-3-git-send-email-peda@axentia.se \
    --to=peda@axentia.se \
    --cc=devicetree@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pm@vger.kernel.org \
    --cc=mark.rutland@arm.com \
    --cc=robh+dt@kernel.org \
    --cc=sre@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).