From: John Stultz <john.stultz@linaro.org>
To: lkml <linux-kernel@vger.kernel.org>
Cc: John Stultz <john.stultz@linaro.org>,
Wei Xu <xuwei5@hisilicon.com>, Guodong Xu <guodong.xu@linaro.org>,
Amit Pundir <amit.pundir@linaro.org>,
Rob Herring <robh+dt@kernel.org>,
John Youn <johnyoun@synopsys.com>,
Douglas Anderson <dianders@chromium.org>,
Chen Yu <chenyu56@huawei.com>,
Kishon Vijay Abraham I <kishon@ti.com>,
Felipe Balbi <felipe.balbi@linux.intel.com>,
Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
linux-usb@vger.kernel.org
Subject: [RFC][PATCH 2/5] usb: dwc2: Workaround case where GOTGCTL state is wrong
Date: Mon, 12 Dec 2016 23:09:47 -0800 [thread overview]
Message-ID: <1481612990-23409-3-git-send-email-john.stultz@linaro.org> (raw)
In-Reply-To: <1481612990-23409-1-git-send-email-john.stultz@linaro.org>
When removing a USB-A to USB-otg adapter cable, we get a change
status irq, and then in dwc2_conn_id_status_change, we
erroniously see the GOTGCTL_CONID_B flag set. This causes us to
get stuck in the "while (!dwc2_is_device_mode(hsotg))" loop,
spitting out "Waiting for Peripheral Mode, Mode=Host" warnings
until it fails out many seconds later.
This patch works around the issue by re-reading the GOTGCTL
state to check if the GOTGCTL_CONID_B is still set and if not
restarting the change status logic.
I suspect this isn't the best solution, but it seems to work
well for me.
Feedback would be greatly appreciated!
Cc: Wei Xu <xuwei5@hisilicon.com>
Cc: Guodong Xu <guodong.xu@linaro.org>
Cc: Amit Pundir <amit.pundir@linaro.org>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: John Youn <johnyoun@synopsys.com>
Cc: Douglas Anderson <dianders@chromium.org>
Cc: Chen Yu <chenyu56@huawei.com>
Cc: Kishon Vijay Abraham I <kishon@ti.com>
Cc: Felipe Balbi <felipe.balbi@linux.intel.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: linux-usb@vger.kernel.org
Acked-by: John Youn <johnyoun@synopsys.com>
Signed-off-by: John Stultz <john.stultz@linaro.org>
---
drivers/usb/dwc2/hcd.c | 5 ++++-
1 file changed, 4 insertions(+), 1 deletion(-)
diff --git a/drivers/usb/dwc2/hcd.c b/drivers/usb/dwc2/hcd.c
index df5a065..a3f34dd 100644
--- a/drivers/usb/dwc2/hcd.c
+++ b/drivers/usb/dwc2/hcd.c
@@ -3199,7 +3199,7 @@ static void dwc2_conn_id_status_change(struct work_struct *work)
dev_dbg(hsotg->dev, "gotgctl=%0x\n", gotgctl);
dev_dbg(hsotg->dev, "gotgctl.b.conidsts=%d\n",
!!(gotgctl & GOTGCTL_CONID_B));
-
+again:
/* B-Device connector (Device Mode) */
if (gotgctl & GOTGCTL_CONID_B) {
/* Wait for switch to device mode */
@@ -3210,6 +3210,9 @@ static void dwc2_conn_id_status_change(struct work_struct *work)
dwc2_is_host_mode(hsotg) ? "Host" :
"Peripheral");
usleep_range(20000, 40000);
+ gotgctl = dwc2_readl(hsotg->regs + GOTGCTL);
+ if (!(gotgctl & GOTGCTL_CONID_B))
+ goto again;
if (++count > 250)
break;
}
--
2.7.4
next prev parent reply other threads:[~2016-12-13 7:10 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-12-13 7:09 [RFC][PATCH 0/5] Fixes and workarounds for dwc2 on HiKey board John Stultz
2016-12-13 7:09 ` [RFC][PATCH 1/5] usb: dwc2: Avoid sleeping while holding hsotg->lock John Stultz
2016-12-13 7:09 ` John Stultz [this message]
2016-12-13 12:28 ` [RFC][PATCH 2/5] usb: dwc2: Workaround case where GOTGCTL state is wrong Vardan Mikayelyan
2016-12-13 20:40 ` John Stultz
2016-12-13 7:09 ` [RFC][PATCH 3/5] usb: dwc2: Force port resume on switching to device mode John Stultz
2016-12-13 7:09 ` [RFC][PATCH 4/5] usb: dwc2: Avoid suspending if we're in gadget mode John Stultz
2016-12-13 7:09 ` [RFC][PATCH 5/5] usb: dwc2: Add a quirk to allow speed negotiation for Hisilicon Hi6220 John Stultz
2016-12-13 13:24 ` Alan Stern
2016-12-13 19:23 ` John Stultz
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1481612990-23409-3-git-send-email-john.stultz@linaro.org \
--to=john.stultz@linaro.org \
--cc=amit.pundir@linaro.org \
--cc=chenyu56@huawei.com \
--cc=dianders@chromium.org \
--cc=felipe.balbi@linux.intel.com \
--cc=gregkh@linuxfoundation.org \
--cc=guodong.xu@linaro.org \
--cc=johnyoun@synopsys.com \
--cc=kishon@ti.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-usb@vger.kernel.org \
--cc=robh+dt@kernel.org \
--cc=xuwei5@hisilicon.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).