[PATCH 0/4] Add spi/iommu/nand/auxadc DT nodes for Mediatek MT2701

[PATCH 0/4] Add spi/iommu/nand/auxadc DT nodes for Mediatek MT2701

[Erin Lo]

This patch series base on v4.10-rc2, include MT2701 spi/iommu/nand/auxadc DT nodes.

Dependent on "Add clock and power domain DT nodes for Mediatek MT2701"[1].

[1] http://lists.infradead.org/pipermail/linux-mediatek/2016-December/007637.html

Honghui Zhang (1):
  arm: dts: mt2701: Add iommu/smi device node

Leilk Liu (1):
  arm: dts: mt2701: Add spi device node

Xiaolei Li (1):
  arm: dts: mt2701: Add nand device node

Zhiyong Tao (1):
  arm: dts: mt2701: Add auxadc device node.

 arch/arm/boot/dts/mt2701.dtsi | 124 ++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 124 insertions(+)

--
1.9.1

[PATCH 1/4] arm: dts: mt2701: Add spi device node

[Erin Lo]

From: Leilk Liu <leilk.liu@mediatek.com>

Add spi device node for MT2701.

Signed-off-by: Leilk Liu <leilk.liu@mediatek.com>
Signed-off-by: Erin Lo <erin.lo@mediatek.com>
---
 arch/arm/boot/dts/mt2701.dtsi | 39 +++++++++++++++++++++++++++++++++++++++
 1 file changed, 39 insertions(+)

diff --git a/arch/arm/boot/dts/mt2701.dtsi b/arch/arm/boot/dts/mt2701.dtsi
index bdf8954..eb4c6fd 100644
--- a/arch/arm/boot/dts/mt2701.dtsi
+++ b/arch/arm/boot/dts/mt2701.dtsi
@@ -227,6 +227,45 @@
 		status = "disabled";
 	};
 
+	spi0: spi@1100a000 {
+		compatible = "mediatek,mt2701-spi";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0 0x1100a000 0 0x100>;
+		interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&topckgen CLK_TOP_SYSPLL3_D2>,
+			 <&topckgen CLK_TOP_SPI0_SEL>,
+			 <&pericfg CLK_PERI_SPI0>;
+		clock-names = "parent-clk", "sel-clk", "spi-clk";
+		status = "disabled";
+	};
+
+	spi1: spi@11016000 {
+		compatible = "mediatek,mt2701-spi";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0 0x11016000 0 0x100>;
+		interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&topckgen CLK_TOP_SYSPLL3_D2>,
+			 <&topckgen CLK_TOP_SPI1_SEL>,
+			 <&pericfg CLK_PERI_SPI1>;
+		clock-names = "parent-clk", "sel-clk", "spi-clk";
+		status = "disabled";
+	};
+
+	spi2: spi@11017000 {
+		compatible = "mediatek,mt2701-spi";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0 0x11017000 0 0x1000>;
+		interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&topckgen CLK_TOP_SYSPLL3_D2>,
+			 <&topckgen CLK_TOP_SPI2_SEL>,
+			 <&pericfg CLK_PERI_SPI2>;
+		clock-names = "parent-clk", "sel-clk", "spi-clk";
+		status = "disabled";
+	};
+
 	mmsys: syscon@14000000 {
 		compatible = "mediatek,mt2701-mmsys", "syscon";
 		reg = <0 0x14000000 0 0x1000>;
-- 
1.9.1

[PATCH 2/4] arm: dts: mt2701: Add iommu/smi device node

[Erin Lo]

From: Honghui Zhang <honghui.zhang@mediatek.com>

Add the device node of iommu and smi for MT2701.

Signed-off-by: Honghui Zhang <honghui.zhang@mediatek.com>
Signed-off-by: Erin Lo <erin.lo@mediatek.com>
---
 arch/arm/boot/dts/mt2701.dtsi | 54 +++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 54 insertions(+)

diff --git a/arch/arm/boot/dts/mt2701.dtsi b/arch/arm/boot/dts/mt2701.dtsi
index eb4c6fd..87be52c 100644
--- a/arch/arm/boot/dts/mt2701.dtsi
+++ b/arch/arm/boot/dts/mt2701.dtsi
@@ -17,6 +17,7 @@
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/reset/mt2701-resets.h>
+#include <dt-bindings/memory/mt2701-larb-port.h>
 #include "skeleton64.dtsi"
 #include "mt2701-pinfunc.h"
 
@@ -161,6 +162,16 @@
 		clock-names = "system-clk", "rtc-clk";
 	};
 
+	smi_common: smi@1000c000 {
+		compatible = "mediatek,mt2701-smi-common";
+		reg = <0 0x1000c000 0 0x1000>;
+		clocks = <&infracfg CLK_INFRA_SMI>,
+			 <&mmsys CLK_MM_SMI_COMMON>,
+			 <&infracfg CLK_INFRA_SMI>;
+		clock-names = "apb", "smi", "async";
+		power-domains = <&scpsys MT2701_POWER_DOMAIN_DISP>;
+	};
+
 	sysirq: interrupt-controller@10200100 {
 		compatible = "mediatek,mt2701-sysirq",
 			     "mediatek,mt6577-sysirq";
@@ -170,6 +181,16 @@
 		reg = <0 0x10200100 0 0x1c>;
 	};
 
+	iommu: mmsys_iommu@10205000 {
+		compatible = "mediatek,mt2701-m4u";
+		reg = <0 0x10205000 0 0x1000>;
+		interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&infracfg CLK_INFRA_M4U>;
+		clock-names = "bclk";
+		mediatek,larbs = <&larb0 &larb1 &larb2>;
+		#iommu-cells = <1>;
+	};
+
 	apmixedsys: syscon@10209000 {
 		compatible = "mediatek,mt2701-apmixedsys", "syscon";
 		reg = <0 0x10209000 0 0x1000>;
@@ -272,18 +293,51 @@
 		#clock-cells = <1>;
 	};
 
+	larb0: larb@14010000 {
+		compatible = "mediatek,mt2701-smi-larb";
+		reg = <0 0x14010000 0 0x1000>;
+		mediatek,smi = <&smi_common>;
+		mediatek,larbidx = <0>;
+		clocks = <&mmsys CLK_MM_SMI_LARB0>,
+			 <&mmsys CLK_MM_SMI_LARB0>;
+		clock-names = "apb", "smi";
+		power-domains = <&scpsys MT2701_POWER_DOMAIN_DISP>;
+	};
+
 	imgsys: syscon@15000000 {
 		compatible = "mediatek,mt2701-imgsys", "syscon";
 		reg = <0 0x15000000 0 0x1000>;
 		#clock-cells = <1>;
 	};
 
+	larb2: larb@15001000 {
+		compatible = "mediatek,mt2701-smi-larb";
+		reg = <0 0x15001000 0 0x1000>;
+		mediatek,smi = <&smi_common>;
+		mediatek,larbidx = <2>;
+		clocks = <&imgsys CLK_IMG_SMI_COMM>,
+			 <&imgsys CLK_IMG_SMI_COMM>;
+		clock-names = "apb", "smi";
+		power-domains = <&scpsys MT2701_POWER_DOMAIN_ISP>;
+	};
+
 	vdecsys: syscon@16000000 {
 		compatible = "mediatek,mt2701-vdecsys", "syscon";
 		reg = <0 0x16000000 0 0x1000>;
 		#clock-cells = <1>;
 	};
 
+	larb1: larb@16010000 {
+		compatible = "mediatek,mt2701-smi-larb";
+		reg = <0 0x16010000 0 0x1000>;
+		mediatek,smi = <&smi_common>;
+		mediatek,larbidx = <1>;
+		clocks = <&vdecsys CLK_VDEC_CKGEN>,
+			 <&vdecsys CLK_VDEC_LARB>;
+		clock-names = "apb", "smi";
+		power-domains = <&scpsys MT2701_POWER_DOMAIN_VDEC>;
+	};
+
 	hifsys: syscon@1a000000 {
 		compatible = "mediatek,mt2701-hifsys", "syscon";
 		reg = <0 0x1a000000 0 0x1000>;
-- 
1.9.1

[PATCH 3/4] arm: dts: mt2701: Add nand device node

[Erin Lo]

From: Xiaolei Li <xiaolei.li@mediatek.com>

Add mt2701 nand device node, include nfi and bch ecc.

Signed-off-by: Xiaolei Li <xiaolei.li@mediatek.com>
Signed-off-by: Erin Lo <erin.lo@mediatek.com>
---
 arch/arm/boot/dts/mt2701.dtsi | 22 ++++++++++++++++++++++
 1 file changed, 22 insertions(+)

diff --git a/arch/arm/boot/dts/mt2701.dtsi b/arch/arm/boot/dts/mt2701.dtsi
index 87be52c..1182c43 100644
--- a/arch/arm/boot/dts/mt2701.dtsi
+++ b/arch/arm/boot/dts/mt2701.dtsi
@@ -261,6 +261,28 @@
 		status = "disabled";
 	};
 
+	nandc: nfi@1100d000 {
+		compatible = "mediatek,mt2701-nfc";
+		reg = <0 0x1100d000 0 0x1000>;
+		interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&pericfg CLK_PERI_NFI>,
+			 <&pericfg CLK_PERI_NFI_PAD>;
+		clock-names = "nfi_clk", "pad_clk";
+		status = "disabled";
+		ecc-engine = <&bch>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+	};
+
+	bch: ecc@1100e000 {
+		compatible = "mediatek,mt2701-ecc";
+		reg = <0 0x1100e000 0 0x1000>;
+		interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&pericfg CLK_PERI_NFI_ECC>;
+		clock-names = "nfiecc_clk";
+		status = "disabled";
+	};
+
 	spi1: spi@11016000 {
 		compatible = "mediatek,mt2701-spi";
 		#address-cells = <1>;
-- 
1.9.1

[PATCH 4/4] arm: dts: mt2701: Add auxadc device node.

[Erin Lo]

From: Zhiyong Tao <zhiyong.tao@mediatek.com>

Add auxadc device node for MT2701.

Signed-off-by: Zhiyong Tao <zhiyong.tao@mediatek.com>
Signed-off-by: Erin Lo <erin.lo@mediatek.com>
---
 arch/arm/boot/dts/mt2701.dtsi | 9 +++++++++
 1 file changed, 9 insertions(+)

diff --git a/arch/arm/boot/dts/mt2701.dtsi b/arch/arm/boot/dts/mt2701.dtsi
index 1182c43..4f52019 100644
--- a/arch/arm/boot/dts/mt2701.dtsi
+++ b/arch/arm/boot/dts/mt2701.dtsi
@@ -208,6 +208,15 @@
 		      <0 0x10216000 0 0x2000>;
 	};
 
+	auxadc: adc@11001000 {
+		compatible = "mediatek,mt2701-auxadc";
+		reg = <0 0x11001000 0 0x1000>;
+		clocks = <&pericfg CLK_PERI_AUXADC>;
+		clock-names = "main";
+		#io-channel-cells = <1>;
+		status = "disabled";
+	};
+
 	uart0: serial@11002000 {
 		compatible = "mediatek,mt2701-uart",
 			     "mediatek,mt6577-uart";
-- 
1.9.1