linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Shannon Nelson <shannon.nelson@oracle.com>
To: netdev@vger.kernel.org, davem@davemloft.net
Cc: sparclinux@vger.kernel.org, linux-kernel@vger.kernel.org,
	Shannon Nelson <shannon.nelson@oracle.com>
Subject: [PATCH v4 net-next 5/8] sunvnet: straighten up message event handling logic
Date: Mon, 13 Feb 2017 10:57:01 -0800	[thread overview]
Message-ID: <1487012224-403399-6-git-send-email-shannon.nelson@oracle.com> (raw)
In-Reply-To: <1487012224-403399-1-git-send-email-shannon.nelson@oracle.com>

The use of gotos for handling the incoming events made this code
harder to read and support than it should be.  This patch straightens
out and clears up the logic.

Signed-off-by: Shannon Nelson <shannon.nelson@oracle.com>
---
 drivers/net/ethernet/sun/sunvnet_common.c |   94 ++++++++++++++---------------
 1 files changed, 45 insertions(+), 49 deletions(-)

diff --git a/drivers/net/ethernet/sun/sunvnet_common.c b/drivers/net/ethernet/sun/sunvnet_common.c
index 623363b..d124bde 100644
--- a/drivers/net/ethernet/sun/sunvnet_common.c
+++ b/drivers/net/ethernet/sun/sunvnet_common.c
@@ -738,41 +738,37 @@ static int vnet_event_napi(struct vnet_port *port, int budget)
 	struct vio_driver_state *vio = &port->vio;
 	int tx_wakeup, err;
 	int npkts = 0;
-	int event = (port->rx_event & LDC_EVENT_RESET);
-
-ldc_ctrl:
-	if (unlikely(event == LDC_EVENT_RESET ||
-		     event == LDC_EVENT_UP)) {
-		vio_link_state_change(vio, event);
-
-		if (event == LDC_EVENT_RESET) {
-			vnet_port_reset(port);
-			vio_port_up(vio);
-
-			/* If the device is running but its tx queue was
-			 * stopped (due to flow control), restart it.
-			 * This is necessary since vnet_port_reset()
-			 * clears the tx drings and thus we may never get
-			 * back a VIO_TYPE_DATA ACK packet - which is
-			 * the normal mechanism to restart the tx queue.
-			 */
-			if (netif_running(dev))
-				maybe_tx_wakeup(port);
-		}
+
+	/* we don't expect any other bits */
+	BUG_ON(port->rx_event & ~(LDC_EVENT_DATA_READY |
+				  LDC_EVENT_RESET |
+				  LDC_EVENT_UP));
+
+	/* RESET takes precedent over any other event */
+	if (port->rx_event & LDC_EVENT_RESET) {
+		vio_link_state_change(vio, LDC_EVENT_RESET);
+		vnet_port_reset(port);
+		vio_port_up(vio);
+
+		/* If the device is running but its tx queue was
+		 * stopped (due to flow control), restart it.
+		 * This is necessary since vnet_port_reset()
+		 * clears the tx drings and thus we may never get
+		 * back a VIO_TYPE_DATA ACK packet - which is
+		 * the normal mechanism to restart the tx queue.
+		 */
+		if (netif_running(dev))
+			maybe_tx_wakeup(port);
+
 		port->rx_event = 0;
 		return 0;
 	}
-	/* We may have multiple LDC events in rx_event. Unroll send_events() */
-	event = (port->rx_event & LDC_EVENT_UP);
-	port->rx_event &= ~(LDC_EVENT_RESET | LDC_EVENT_UP);
-	if (event == LDC_EVENT_UP)
-		goto ldc_ctrl;
-	event = port->rx_event;
-	if (!(event & LDC_EVENT_DATA_READY))
-		return 0;
 
-	/* we dont expect any other bits than RESET, UP, DATA_READY */
-	BUG_ON(event != LDC_EVENT_DATA_READY);
+	if (port->rx_event & LDC_EVENT_UP) {
+		vio_link_state_change(vio, LDC_EVENT_UP);
+		port->rx_event = 0;
+		return 0;
+	}
 
 	err = 0;
 	tx_wakeup = 0;
@@ -795,25 +791,25 @@ static int vnet_event_napi(struct vnet_port *port, int budget)
 			pkt->start_idx = vio_dring_next(dr,
 							port->napi_stop_idx);
 			pkt->end_idx = -1;
-			goto napi_resume;
-		}
-		err = ldc_read(vio->lp, &msgbuf, sizeof(msgbuf));
-		if (unlikely(err < 0)) {
-			if (err == -ECONNRESET)
-				vio_conn_reset(vio);
-			break;
+		} else {
+			err = ldc_read(vio->lp, &msgbuf, sizeof(msgbuf));
+			if (unlikely(err < 0)) {
+				if (err == -ECONNRESET)
+					vio_conn_reset(vio);
+				break;
+			}
+			if (err == 0)
+				break;
+			viodbg(DATA, "TAG [%02x:%02x:%04x:%08x]\n",
+			       msgbuf.tag.type,
+			       msgbuf.tag.stype,
+			       msgbuf.tag.stype_env,
+			       msgbuf.tag.sid);
+			err = vio_validate_sid(vio, &msgbuf.tag);
+			if (err < 0)
+				break;
 		}
-		if (err == 0)
-			break;
-		viodbg(DATA, "TAG [%02x:%02x:%04x:%08x]\n",
-		       msgbuf.tag.type,
-		       msgbuf.tag.stype,
-		       msgbuf.tag.stype_env,
-		       msgbuf.tag.sid);
-		err = vio_validate_sid(vio, &msgbuf.tag);
-		if (err < 0)
-			break;
-napi_resume:
+
 		if (likely(msgbuf.tag.type == VIO_TYPE_DATA)) {
 			if (msgbuf.tag.stype == VIO_SUBTYPE_INFO) {
 				if (!sunvnet_port_is_up_common(port)) {
-- 
1.7.1

  parent reply	other threads:[~2017-02-13 19:00 UTC|newest]

Thread overview: 12+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-02-13 18:56 [PATCH v4 net-next 0/8] sunvnet driver updates Shannon Nelson
2017-02-13 18:56 ` [PATCH v4 net-next 1/8] sunvnet: make sunvnet common code dynamically loadable Shannon Nelson
2017-02-13 18:56 ` [PATCH v4 net-next 2/8] sunvnet: remove unused variable in maybe_tx_wakeup Shannon Nelson
2017-02-13 18:56 ` [PATCH v4 net-next 3/8] sunvnet: update version and version printing Shannon Nelson
2017-02-13 18:57 ` [PATCH v4 net-next 4/8] sunvnet: add memory barrier before check for tx enable Shannon Nelson
2017-02-13 18:57 ` Shannon Nelson [this message]
2017-02-13 19:06   ` [PATCH v4 net-next 5/8] sunvnet: straighten up message event handling logic Joe Perches
2017-02-13 19:18     ` Shannon Nelson
2017-02-13 18:57 ` [PATCH v4 net-next 6/8] sunvnet: remove extra rcu_read_unlocks Shannon Nelson
2017-02-13 18:57 ` [PATCH v4 net-next 7/8] ldmvsw: update and simplify version string Shannon Nelson
2017-02-13 18:57 ` [PATCH v4 net-next 8/8] ldmvsw: disable tso and gso for bridge operations Shannon Nelson
2017-02-14 18:04 ` [PATCH v4 net-next 0/8] sunvnet driver updates David Miller

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1487012224-403399-6-git-send-email-shannon.nelson@oracle.com \
    --to=shannon.nelson@oracle.com \
    --cc=davem@davemloft.net \
    --cc=linux-kernel@vger.kernel.org \
    --cc=netdev@vger.kernel.org \
    --cc=sparclinux@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).