[PATCH v5 1/3] mfd: wm831x: Add basic device tree binding

[PATCH v5 1/3] mfd: wm831x: Add basic device tree binding

[Charles Keepax]

Add the basic ability to register the device through device tree, more
work is needed to get each individual sub-driver functioning correctly
but this is enough to get the device to probe from device tree.

Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
---

Changes since v4:
 - Removed pointless intermediate variable after of_match_device
 - Moved all local variables to start of function rather than in
   their localised code block

Thanks,
Charles

 drivers/mfd/wm831x-core.c       | 29 +++++++++++++++++++++--------
 drivers/mfd/wm831x-i2c.c        | 19 ++++++++++++++++++-
 drivers/mfd/wm831x-irq.c        |  6 +++---
 drivers/mfd/wm831x-spi.c        | 18 ++++++++++++++++--
 include/linux/mfd/wm831x/core.h |  9 ++++++++-
 5 files changed, 66 insertions(+), 15 deletions(-)

diff --git a/drivers/mfd/wm831x-core.c b/drivers/mfd/wm831x-core.c
index 3e0e99e..13a4c11 100644
--- a/drivers/mfd/wm831x-core.c
+++ b/drivers/mfd/wm831x-core.c
@@ -19,6 +19,8 @@
 #include <linux/mfd/core.h>
 #include <linux/slab.h>
 #include <linux/err.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
 
 #include <linux/mfd/wm831x/core.h>
 #include <linux/mfd/wm831x/pdata.h>
@@ -1613,12 +1615,24 @@ struct regmap_config wm831x_regmap_config = {
 };
 EXPORT_SYMBOL_GPL(wm831x_regmap_config);
 
+const struct of_device_id wm831x_of_match[] = {
+	{ .compatible = "wlf,wm8310", .data = (void *)WM8310 },
+	{ .compatible = "wlf,wm8311", .data = (void *)WM8311 },
+	{ .compatible = "wlf,wm8312", .data = (void *)WM8312 },
+	{ .compatible = "wlf,wm8320", .data = (void *)WM8320 },
+	{ .compatible = "wlf,wm8321", .data = (void *)WM8321 },
+	{ .compatible = "wlf,wm8325", .data = (void *)WM8325 },
+	{ .compatible = "wlf,wm8326", .data = (void *)WM8326 },
+	{ },
+};
+EXPORT_SYMBOL_GPL(wm831x_of_match);
+
 /*
  * Instantiate the generic non-control parts of the device.
  */
-int wm831x_device_init(struct wm831x *wm831x, unsigned long id, int irq)
+int wm831x_device_init(struct wm831x *wm831x, int irq)
 {
-	struct wm831x_pdata *pdata = dev_get_platdata(wm831x->dev);
+	struct wm831x_pdata *pdata = &wm831x->pdata;
 	int rev, wm831x_num;
 	enum wm831x_parent parent;
 	int ret, i;
@@ -1627,8 +1641,7 @@ int wm831x_device_init(struct wm831x *wm831x, unsigned long id, int irq)
 	mutex_init(&wm831x->key_lock);
 	dev_set_drvdata(wm831x->dev, wm831x);
 
-	if (pdata)
-		wm831x->soft_shutdown = pdata->soft_shutdown;
+	wm831x->soft_shutdown = pdata->soft_shutdown;
 
 	ret = wm831x_reg_read(wm831x, WM831X_PARENT_ID);
 	if (ret < 0) {
@@ -1663,7 +1676,7 @@ int wm831x_device_init(struct wm831x *wm831x, unsigned long id, int irq)
 	 */
 	if (ret == 0) {
 		dev_info(wm831x->dev, "Device is an engineering sample\n");
-		ret = id;
+		ret = wm831x->type;
 	}
 
 	switch (ret) {
@@ -1736,9 +1749,9 @@ int wm831x_device_init(struct wm831x *wm831x, unsigned long id, int irq)
 	/* This will need revisiting in future but is OK for all
 	 * current parts.
 	 */
-	if (parent != id)
-		dev_warn(wm831x->dev, "Device was registered as a WM%lx\n",
-			 id);
+	if (parent != wm831x->type)
+		dev_warn(wm831x->dev, "Device was registered as a WM%x\n",
+			 wm831x->type);
 
 	/* Bootstrap the user key */
 	ret = wm831x_reg_read(wm831x, WM831X_SECURITY_KEY);
diff --git a/drivers/mfd/wm831x-i2c.c b/drivers/mfd/wm831x-i2c.c
index 824bcba..781af06 100644
--- a/drivers/mfd/wm831x-i2c.c
+++ b/drivers/mfd/wm831x-i2c.c
@@ -19,6 +19,8 @@
 #include <linux/mfd/core.h>
 #include <linux/slab.h>
 #include <linux/err.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
 #include <linux/regmap.h>
 
 #include <linux/mfd/wm831x/core.h>
@@ -27,15 +29,26 @@
 static int wm831x_i2c_probe(struct i2c_client *i2c,
 			    const struct i2c_device_id *id)
 {
+	struct wm831x_pdata *pdata = dev_get_platdata(&i2c->dev);
+	const struct of_device_id *of_id;
 	struct wm831x *wm831x;
+	enum wm831x_parent type;
 	int ret;
 
+	if (i2c->dev.of_node) {
+		of_id = of_match_device(wm831x_of_match, &i2c->dev);
+		type = (enum wm831x_parent)of_id->data;
+	} else {
+		type = (enum wm831x_parent)id->driver_data;
+	}
+
 	wm831x = devm_kzalloc(&i2c->dev, sizeof(struct wm831x), GFP_KERNEL);
 	if (wm831x == NULL)
 		return -ENOMEM;
 
 	i2c_set_clientdata(i2c, wm831x);
 	wm831x->dev = &i2c->dev;
+	wm831x->type = type;
 
 	wm831x->regmap = devm_regmap_init_i2c(i2c, &wm831x_regmap_config);
 	if (IS_ERR(wm831x->regmap)) {
@@ -45,7 +58,10 @@ static int wm831x_i2c_probe(struct i2c_client *i2c,
 		return ret;
 	}
 
-	return wm831x_device_init(wm831x, id->driver_data, i2c->irq);
+	if (pdata)
+		memcpy(&wm831x->pdata, pdata, sizeof(*pdata));
+
+	return wm831x_device_init(wm831x, i2c->irq);
 }
 
 static int wm831x_i2c_remove(struct i2c_client *i2c)
@@ -94,6 +110,7 @@ static struct i2c_driver wm831x_i2c_driver = {
 	.driver = {
 		.name = "wm831x",
 		.pm = &wm831x_pm_ops,
+		.of_match_table = of_match_ptr(wm831x_of_match),
 	},
 	.probe = wm831x_i2c_probe,
 	.remove = wm831x_i2c_remove,
diff --git a/drivers/mfd/wm831x-irq.c b/drivers/mfd/wm831x-irq.c
index dfea8b9..c01239a 100644
--- a/drivers/mfd/wm831x-irq.c
+++ b/drivers/mfd/wm831x-irq.c
@@ -564,7 +564,7 @@ static const struct irq_domain_ops wm831x_irq_domain_ops = {
 
 int wm831x_irq_init(struct wm831x *wm831x, int irq)
 {
-	struct wm831x_pdata *pdata = dev_get_platdata(wm831x->dev);
+	struct wm831x_pdata *pdata = &wm831x->pdata;
 	struct irq_domain *domain;
 	int i, ret, irq_base;
 
@@ -579,7 +579,7 @@ int wm831x_irq_init(struct wm831x *wm831x, int irq)
 	}
 
 	/* Try to dynamically allocate IRQs if no base is specified */
-	if (pdata && pdata->irq_base) {
+	if (pdata->irq_base) {
 		irq_base = irq_alloc_descs(pdata->irq_base, 0,
 					   WM831X_NUM_IRQS, 0);
 		if (irq_base < 0) {
@@ -608,7 +608,7 @@ int wm831x_irq_init(struct wm831x *wm831x, int irq)
 		return -EINVAL;
 	}
 
-	if (pdata && pdata->irq_cmos)
+	if (pdata->irq_cmos)
 		i = 0;
 	else
 		i = WM831X_IRQ_OD;
diff --git a/drivers/mfd/wm831x-spi.c b/drivers/mfd/wm831x-spi.c
index 80482ae..c332e28 100644
--- a/drivers/mfd/wm831x-spi.c
+++ b/drivers/mfd/wm831x-spi.c
@@ -14,6 +14,8 @@
 
 #include <linux/kernel.h>
 #include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
 #include <linux/pm.h>
 #include <linux/spi/spi.h>
 #include <linux/regmap.h>
@@ -23,12 +25,19 @@
 
 static int wm831x_spi_probe(struct spi_device *spi)
 {
+	struct wm831x_pdata *pdata = dev_get_platdata(&spi->dev);
 	const struct spi_device_id *id = spi_get_device_id(spi);
+	const struct of_device_id *of_id;
 	struct wm831x *wm831x;
 	enum wm831x_parent type;
 	int ret;
 
-	type = (enum wm831x_parent)id->driver_data;
+	if (spi->dev.of_node) {
+		of_id = of_match_device(wm831x_of_match, &spi->dev);
+		type = (enum wm831x_parent)of_id->data;
+	} else {
+		type = (enum wm831x_parent)id->driver_data;
+	}
 
 	wm831x = devm_kzalloc(&spi->dev, sizeof(struct wm831x), GFP_KERNEL);
 	if (wm831x == NULL)
@@ -38,6 +47,7 @@ static int wm831x_spi_probe(struct spi_device *spi)
 
 	spi_set_drvdata(spi, wm831x);
 	wm831x->dev = &spi->dev;
+	wm831x->type = type;
 
 	wm831x->regmap = devm_regmap_init_spi(spi, &wm831x_regmap_config);
 	if (IS_ERR(wm831x->regmap)) {
@@ -47,7 +57,10 @@ static int wm831x_spi_probe(struct spi_device *spi)
 		return ret;
 	}
 
-	return wm831x_device_init(wm831x, type, spi->irq);
+	if (pdata)
+		memcpy(&wm831x->pdata, pdata, sizeof(*pdata));
+
+	return wm831x_device_init(wm831x, spi->irq);
 }
 
 static int wm831x_spi_remove(struct spi_device *spi)
@@ -97,6 +110,7 @@ static struct spi_driver wm831x_spi_driver = {
 	.driver = {
 		.name	= "wm831x",
 		.pm	= &wm831x_spi_pm,
+		.of_match_table = of_match_ptr(wm831x_of_match),
 	},
 	.id_table	= wm831x_spi_ids,
 	.probe		= wm831x_spi_probe,
diff --git a/include/linux/mfd/wm831x/core.h b/include/linux/mfd/wm831x/core.h
index 76c2264..b49fa676 100644
--- a/include/linux/mfd/wm831x/core.h
+++ b/include/linux/mfd/wm831x/core.h
@@ -21,6 +21,8 @@
 #include <linux/list.h>
 #include <linux/regmap.h>
 #include <linux/mfd/wm831x/auxadc.h>
+#include <linux/mfd/wm831x/pdata.h>
+#include <linux/of.h>
 
 /*
  * Register values.
@@ -367,6 +369,9 @@ struct wm831x {
 
 	struct regmap *regmap;
 
+	struct wm831x_pdata pdata;
+	enum wm831x_parent type;
+
 	int irq;  /* Our chip IRQ */
 	struct mutex irq_lock;
 	struct irq_domain *irq_domain;
@@ -412,7 +417,7 @@ int wm831x_set_bits(struct wm831x *wm831x, unsigned short reg,
 int wm831x_bulk_read(struct wm831x *wm831x, unsigned short reg,
 		     int count, u16 *buf);
 
-int wm831x_device_init(struct wm831x *wm831x, unsigned long id, int irq);
+int wm831x_device_init(struct wm831x *wm831x, int irq);
 void wm831x_device_exit(struct wm831x *wm831x);
 int wm831x_device_suspend(struct wm831x *wm831x);
 void wm831x_device_shutdown(struct wm831x *wm831x);
@@ -427,4 +432,6 @@ static inline int wm831x_irq(struct wm831x *wm831x, int irq)
 
 extern struct regmap_config wm831x_regmap_config;
 
+extern const struct of_device_id wm831x_of_match[];
+
 #endif
-- 
2.1.4

[PATCH v5 2/3] gpio: wm831x: Add basic device tree support

[Charles Keepax]

Now the wm831x-core has basic DT support we can update this driver to
allow use of the GPIOs within a device tree system.

Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
---

No changes since v4, still should go through Lee's tree.

Thanks,
Charles

 drivers/gpio/gpio-wm831x.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/drivers/gpio/gpio-wm831x.c b/drivers/gpio/gpio-wm831x.c
index 00e3839..938bbe3 100644
--- a/drivers/gpio/gpio-wm831x.c
+++ b/drivers/gpio/gpio-wm831x.c
@@ -263,7 +263,7 @@ static const struct gpio_chip template_chip = {
 static int wm831x_gpio_probe(struct platform_device *pdev)
 {
 	struct wm831x *wm831x = dev_get_drvdata(pdev->dev.parent);
-	struct wm831x_pdata *pdata = dev_get_platdata(wm831x->dev);
+	struct wm831x_pdata *pdata = &wm831x->pdata;
 	struct wm831x_gpio *wm831x_gpio;
 	int ret;
 
@@ -280,6 +280,9 @@ static int wm831x_gpio_probe(struct platform_device *pdev)
 		wm831x_gpio->gpio_chip.base = pdata->gpio_base;
 	else
 		wm831x_gpio->gpio_chip.base = -1;
+#ifdef CONFIG_OF_GPIO
+	wm831x_gpio->gpio_chip.of_node = wm831x->dev->of_node;
+#endif
 
 	ret = devm_gpiochip_add_data(&pdev->dev, &wm831x_gpio->gpio_chip,
 				     wm831x_gpio);
-- 
2.1.4

[PATCH v5 3/3] mfd: wm831x: Add device tree binding document

[Charles Keepax]

Add a device tree binding document for the wm831x series of PMICs.
Currently only support for the registering the device and the GPIOs are
actually implemented in the driver.

Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
---

Changes since v4:
 - Removed one extra level of ../ for relative links that was incorrect

Thanks,
Charles

 Documentation/devicetree/bindings/mfd/wm831x.txt | 81 ++++++++++++++++++++++++
 MAINTAINERS                                      |  1 +
 2 files changed, 82 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/mfd/wm831x.txt

diff --git a/Documentation/devicetree/bindings/mfd/wm831x.txt b/Documentation/devicetree/bindings/mfd/wm831x.txt
new file mode 100644
index 0000000..9f8b743
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/wm831x.txt
@@ -0,0 +1,81 @@
+Cirrus Logic/Wolfson Microelectronics wm831x PMICs
+
+System PMICs with a wide range of additional features.
+
+Required properties:
+
+  - compatible : One of the following chip-specific strings:
+        "wlf,wm8310"
+        "wlf,wm8311"
+        "wlf,wm8312"
+        "wlf,wm8320"
+        "wlf,wm8321"
+        "wlf,wm8325"
+        "wlf,wm8326"
+
+  - reg : I2C slave address when connected using I2C, chip select number
+    when using SPI.
+
+  - gpio-controller : Indicates this device is a GPIO controller.
+  - #gpio-cells : Must be 2. The first cell is the pin number and the
+    second cell is used to specify optional parameters (currently unused).
+
+  - interrupts : The interrupt line the IRQ signal for the device is
+    connected to.
+  - interrupt-parent : The parent interrupt controller.
+
+  - interrupt-controller : wm831x devices contain interrupt controllers and
+    may provide interrupt services to other devices.
+  - #interrupt-cells: Must be 2. The first cell is the IRQ number, and the
+    second cell is the flags, encoded as the trigger masks from
+    ../interrupt-controller/interrupts.txt
+
+Optional sub-nodes:
+  - regulators : Contains sub-nodes for each of the regulators supplied by
+    the device. The regulators are bound using their names listed below:
+
+    dcdc1 : DCDC1
+    dcdc2 : DCDC2
+    dcdc3 : DCDC3
+    dcdc4 : DCDC3
+    isink1 : ISINK1
+    isink2 : ISINK2
+    ldo1 : LDO1
+    ldo2 : LDO2
+    ldo3 : LDO3
+    ldo4 : LDO4
+    ldo5 : LDO5
+    ldo7 : LDO7
+    ldo11 : LDO11
+
+    The bindings details of each regulator can be found in:
+    ../regulator/regulator.txt
+
+Example:
+
+wm8310: pmic@36 {
+	compatible = "wlf,wm8310";
+	reg = <0x36>;
+
+	gpio-controller;
+	#gpio-cells = <2>;
+
+	interrupts = <347>;
+	interrupt-parent = <&gic>;
+
+	interrupt-controller;
+	#interrupt-cells = <2>;
+
+	regulators {
+		dcdc1: dcdc1 {
+			regulator-name = "DCDC1";
+			regulator-min-microvolt = <600000>;
+			regulator-max-microvolt = <600000>;
+		};
+		ldo1: ldo1 {
+			regulator-name = "LDO1";
+			regulator-min-microvolt = <1700000>;
+			regulator-max-microvolt = <1700000>;
+		};
+	};
+};
diff --git a/MAINTAINERS b/MAINTAINERS
index c265a5f..dfe761b 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -13600,6 +13600,7 @@ F:	Documentation/hwmon/wm83??
 F:	Documentation/devicetree/bindings/extcon/extcon-arizona.txt
 F:	Documentation/devicetree/bindings/regulator/arizona-regulator.txt
 F:	Documentation/devicetree/bindings/mfd/arizona.txt
+F:	Documentation/devicetree/bindings/mfd/wm831x.txt
 F:	arch/arm/mach-s3c64xx/mach-crag6410*
 F:	drivers/clk/clk-wm83*.c
 F:	drivers/extcon/extcon-arizona.c
-- 
2.1.4

Re: [PATCH v5 1/3] mfd: wm831x: Add basic device tree binding

[Lee Jones]

On Fri, 17 Mar 2017, Charles Keepax wrote:

> Add the basic ability to register the device through device tree, more
> work is needed to get each individual sub-driver functioning correctly
> but this is enough to get the device to probe from device tree.
> 
> Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
> ---
> 
> Changes since v4:
>  - Removed pointless intermediate variable after of_match_device
>  - Moved all local variables to start of function rather than in
>    their localised code block
> 
> Thanks,
> Charles
> 
>  drivers/mfd/wm831x-core.c       | 29 +++++++++++++++++++++--------
>  drivers/mfd/wm831x-i2c.c        | 19 ++++++++++++++++++-
>  drivers/mfd/wm831x-irq.c        |  6 +++---
>  drivers/mfd/wm831x-spi.c        | 18 ++++++++++++++++--
>  include/linux/mfd/wm831x/core.h |  9 ++++++++-
>  5 files changed, 66 insertions(+), 15 deletions(-)

Applied, thanks.

> diff --git a/drivers/mfd/wm831x-core.c b/drivers/mfd/wm831x-core.c
> index 3e0e99e..13a4c11 100644
> --- a/drivers/mfd/wm831x-core.c
> +++ b/drivers/mfd/wm831x-core.c
> @@ -19,6 +19,8 @@
>  #include <linux/mfd/core.h>
>  #include <linux/slab.h>
>  #include <linux/err.h>
> +#include <linux/of.h>
> +#include <linux/of_device.h>
>  
>  #include <linux/mfd/wm831x/core.h>
>  #include <linux/mfd/wm831x/pdata.h>
> @@ -1613,12 +1615,24 @@ struct regmap_config wm831x_regmap_config = {
>  };
>  EXPORT_SYMBOL_GPL(wm831x_regmap_config);
>  
> +const struct of_device_id wm831x_of_match[] = {
> +	{ .compatible = "wlf,wm8310", .data = (void *)WM8310 },
> +	{ .compatible = "wlf,wm8311", .data = (void *)WM8311 },
> +	{ .compatible = "wlf,wm8312", .data = (void *)WM8312 },
> +	{ .compatible = "wlf,wm8320", .data = (void *)WM8320 },
> +	{ .compatible = "wlf,wm8321", .data = (void *)WM8321 },
> +	{ .compatible = "wlf,wm8325", .data = (void *)WM8325 },
> +	{ .compatible = "wlf,wm8326", .data = (void *)WM8326 },
> +	{ },
> +};
> +EXPORT_SYMBOL_GPL(wm831x_of_match);
> +
>  /*
>   * Instantiate the generic non-control parts of the device.
>   */
> -int wm831x_device_init(struct wm831x *wm831x, unsigned long id, int irq)
> +int wm831x_device_init(struct wm831x *wm831x, int irq)
>  {
> -	struct wm831x_pdata *pdata = dev_get_platdata(wm831x->dev);
> +	struct wm831x_pdata *pdata = &wm831x->pdata;
>  	int rev, wm831x_num;
>  	enum wm831x_parent parent;
>  	int ret, i;
> @@ -1627,8 +1641,7 @@ int wm831x_device_init(struct wm831x *wm831x, unsigned long id, int irq)
>  	mutex_init(&wm831x->key_lock);
>  	dev_set_drvdata(wm831x->dev, wm831x);
>  
> -	if (pdata)
> -		wm831x->soft_shutdown = pdata->soft_shutdown;
> +	wm831x->soft_shutdown = pdata->soft_shutdown;
>  
>  	ret = wm831x_reg_read(wm831x, WM831X_PARENT_ID);
>  	if (ret < 0) {
> @@ -1663,7 +1676,7 @@ int wm831x_device_init(struct wm831x *wm831x, unsigned long id, int irq)
>  	 */
>  	if (ret == 0) {
>  		dev_info(wm831x->dev, "Device is an engineering sample\n");
> -		ret = id;
> +		ret = wm831x->type;
>  	}
>  
>  	switch (ret) {
> @@ -1736,9 +1749,9 @@ int wm831x_device_init(struct wm831x *wm831x, unsigned long id, int irq)
>  	/* This will need revisiting in future but is OK for all
>  	 * current parts.
>  	 */
> -	if (parent != id)
> -		dev_warn(wm831x->dev, "Device was registered as a WM%lx\n",
> -			 id);
> +	if (parent != wm831x->type)
> +		dev_warn(wm831x->dev, "Device was registered as a WM%x\n",
> +			 wm831x->type);
>  
>  	/* Bootstrap the user key */
>  	ret = wm831x_reg_read(wm831x, WM831X_SECURITY_KEY);
> diff --git a/drivers/mfd/wm831x-i2c.c b/drivers/mfd/wm831x-i2c.c
> index 824bcba..781af06 100644
> --- a/drivers/mfd/wm831x-i2c.c
> +++ b/drivers/mfd/wm831x-i2c.c
> @@ -19,6 +19,8 @@
>  #include <linux/mfd/core.h>
>  #include <linux/slab.h>
>  #include <linux/err.h>
> +#include <linux/of.h>
> +#include <linux/of_device.h>
>  #include <linux/regmap.h>
>  
>  #include <linux/mfd/wm831x/core.h>
> @@ -27,15 +29,26 @@
>  static int wm831x_i2c_probe(struct i2c_client *i2c,
>  			    const struct i2c_device_id *id)
>  {
> +	struct wm831x_pdata *pdata = dev_get_platdata(&i2c->dev);
> +	const struct of_device_id *of_id;
>  	struct wm831x *wm831x;
> +	enum wm831x_parent type;
>  	int ret;
>  
> +	if (i2c->dev.of_node) {
> +		of_id = of_match_device(wm831x_of_match, &i2c->dev);
> +		type = (enum wm831x_parent)of_id->data;
> +	} else {
> +		type = (enum wm831x_parent)id->driver_data;
> +	}
> +
>  	wm831x = devm_kzalloc(&i2c->dev, sizeof(struct wm831x), GFP_KERNEL);
>  	if (wm831x == NULL)
>  		return -ENOMEM;
>  
>  	i2c_set_clientdata(i2c, wm831x);
>  	wm831x->dev = &i2c->dev;
> +	wm831x->type = type;
>  
>  	wm831x->regmap = devm_regmap_init_i2c(i2c, &wm831x_regmap_config);
>  	if (IS_ERR(wm831x->regmap)) {
> @@ -45,7 +58,10 @@ static int wm831x_i2c_probe(struct i2c_client *i2c,
>  		return ret;
>  	}
>  
> -	return wm831x_device_init(wm831x, id->driver_data, i2c->irq);
> +	if (pdata)
> +		memcpy(&wm831x->pdata, pdata, sizeof(*pdata));
> +
> +	return wm831x_device_init(wm831x, i2c->irq);
>  }
>  
>  static int wm831x_i2c_remove(struct i2c_client *i2c)
> @@ -94,6 +110,7 @@ static struct i2c_driver wm831x_i2c_driver = {
>  	.driver = {
>  		.name = "wm831x",
>  		.pm = &wm831x_pm_ops,
> +		.of_match_table = of_match_ptr(wm831x_of_match),
>  	},
>  	.probe = wm831x_i2c_probe,
>  	.remove = wm831x_i2c_remove,
> diff --git a/drivers/mfd/wm831x-irq.c b/drivers/mfd/wm831x-irq.c
> index dfea8b9..c01239a 100644
> --- a/drivers/mfd/wm831x-irq.c
> +++ b/drivers/mfd/wm831x-irq.c
> @@ -564,7 +564,7 @@ static const struct irq_domain_ops wm831x_irq_domain_ops = {
>  
>  int wm831x_irq_init(struct wm831x *wm831x, int irq)
>  {
> -	struct wm831x_pdata *pdata = dev_get_platdata(wm831x->dev);
> +	struct wm831x_pdata *pdata = &wm831x->pdata;
>  	struct irq_domain *domain;
>  	int i, ret, irq_base;
>  
> @@ -579,7 +579,7 @@ int wm831x_irq_init(struct wm831x *wm831x, int irq)
>  	}
>  
>  	/* Try to dynamically allocate IRQs if no base is specified */
> -	if (pdata && pdata->irq_base) {
> +	if (pdata->irq_base) {
>  		irq_base = irq_alloc_descs(pdata->irq_base, 0,
>  					   WM831X_NUM_IRQS, 0);
>  		if (irq_base < 0) {
> @@ -608,7 +608,7 @@ int wm831x_irq_init(struct wm831x *wm831x, int irq)
>  		return -EINVAL;
>  	}
>  
> -	if (pdata && pdata->irq_cmos)
> +	if (pdata->irq_cmos)
>  		i = 0;
>  	else
>  		i = WM831X_IRQ_OD;
> diff --git a/drivers/mfd/wm831x-spi.c b/drivers/mfd/wm831x-spi.c
> index 80482ae..c332e28 100644
> --- a/drivers/mfd/wm831x-spi.c
> +++ b/drivers/mfd/wm831x-spi.c
> @@ -14,6 +14,8 @@
>  
>  #include <linux/kernel.h>
>  #include <linux/module.h>
> +#include <linux/of.h>
> +#include <linux/of_device.h>
>  #include <linux/pm.h>
>  #include <linux/spi/spi.h>
>  #include <linux/regmap.h>
> @@ -23,12 +25,19 @@
>  
>  static int wm831x_spi_probe(struct spi_device *spi)
>  {
> +	struct wm831x_pdata *pdata = dev_get_platdata(&spi->dev);
>  	const struct spi_device_id *id = spi_get_device_id(spi);
> +	const struct of_device_id *of_id;
>  	struct wm831x *wm831x;
>  	enum wm831x_parent type;
>  	int ret;
>  
> -	type = (enum wm831x_parent)id->driver_data;
> +	if (spi->dev.of_node) {
> +		of_id = of_match_device(wm831x_of_match, &spi->dev);
> +		type = (enum wm831x_parent)of_id->data;
> +	} else {
> +		type = (enum wm831x_parent)id->driver_data;
> +	}
>  
>  	wm831x = devm_kzalloc(&spi->dev, sizeof(struct wm831x), GFP_KERNEL);
>  	if (wm831x == NULL)
> @@ -38,6 +47,7 @@ static int wm831x_spi_probe(struct spi_device *spi)
>  
>  	spi_set_drvdata(spi, wm831x);
>  	wm831x->dev = &spi->dev;
> +	wm831x->type = type;
>  
>  	wm831x->regmap = devm_regmap_init_spi(spi, &wm831x_regmap_config);
>  	if (IS_ERR(wm831x->regmap)) {
> @@ -47,7 +57,10 @@ static int wm831x_spi_probe(struct spi_device *spi)
>  		return ret;
>  	}
>  
> -	return wm831x_device_init(wm831x, type, spi->irq);
> +	if (pdata)
> +		memcpy(&wm831x->pdata, pdata, sizeof(*pdata));
> +
> +	return wm831x_device_init(wm831x, spi->irq);
>  }
>  
>  static int wm831x_spi_remove(struct spi_device *spi)
> @@ -97,6 +110,7 @@ static struct spi_driver wm831x_spi_driver = {
>  	.driver = {
>  		.name	= "wm831x",
>  		.pm	= &wm831x_spi_pm,
> +		.of_match_table = of_match_ptr(wm831x_of_match),
>  	},
>  	.id_table	= wm831x_spi_ids,
>  	.probe		= wm831x_spi_probe,
> diff --git a/include/linux/mfd/wm831x/core.h b/include/linux/mfd/wm831x/core.h
> index 76c2264..b49fa676 100644
> --- a/include/linux/mfd/wm831x/core.h
> +++ b/include/linux/mfd/wm831x/core.h
> @@ -21,6 +21,8 @@
>  #include <linux/list.h>
>  #include <linux/regmap.h>
>  #include <linux/mfd/wm831x/auxadc.h>
> +#include <linux/mfd/wm831x/pdata.h>
> +#include <linux/of.h>
>  
>  /*
>   * Register values.
> @@ -367,6 +369,9 @@ struct wm831x {
>  
>  	struct regmap *regmap;
>  
> +	struct wm831x_pdata pdata;
> +	enum wm831x_parent type;
> +
>  	int irq;  /* Our chip IRQ */
>  	struct mutex irq_lock;
>  	struct irq_domain *irq_domain;
> @@ -412,7 +417,7 @@ int wm831x_set_bits(struct wm831x *wm831x, unsigned short reg,
>  int wm831x_bulk_read(struct wm831x *wm831x, unsigned short reg,
>  		     int count, u16 *buf);
>  
> -int wm831x_device_init(struct wm831x *wm831x, unsigned long id, int irq);
> +int wm831x_device_init(struct wm831x *wm831x, int irq);
>  void wm831x_device_exit(struct wm831x *wm831x);
>  int wm831x_device_suspend(struct wm831x *wm831x);
>  void wm831x_device_shutdown(struct wm831x *wm831x);
> @@ -427,4 +432,6 @@ static inline int wm831x_irq(struct wm831x *wm831x, int irq)
>  
>  extern struct regmap_config wm831x_regmap_config;
>  
> +extern const struct of_device_id wm831x_of_match[];
> +
>  #endif

-- 
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog

Re: [PATCH v5 2/3] gpio: wm831x: Add basic device tree support

[Lee Jones]

On Fri, 17 Mar 2017, Charles Keepax wrote:

> Now the wm831x-core has basic DT support we can update this driver to
> allow use of the GPIOs within a device tree system.
> 
> Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
> Acked-by: Linus Walleij <linus.walleij@linaro.org>
> ---
> 
> No changes since v4, still should go through Lee's tree.
> 
> Thanks,
> Charles
> 
>  drivers/gpio/gpio-wm831x.c | 5 ++++-
>  1 file changed, 4 insertions(+), 1 deletion(-)

Applied, thanks.

> diff --git a/drivers/gpio/gpio-wm831x.c b/drivers/gpio/gpio-wm831x.c
> index 00e3839..938bbe3 100644
> --- a/drivers/gpio/gpio-wm831x.c
> +++ b/drivers/gpio/gpio-wm831x.c
> @@ -263,7 +263,7 @@ static const struct gpio_chip template_chip = {
>  static int wm831x_gpio_probe(struct platform_device *pdev)
>  {
>  	struct wm831x *wm831x = dev_get_drvdata(pdev->dev.parent);
> -	struct wm831x_pdata *pdata = dev_get_platdata(wm831x->dev);
> +	struct wm831x_pdata *pdata = &wm831x->pdata;
>  	struct wm831x_gpio *wm831x_gpio;
>  	int ret;
>  
> @@ -280,6 +280,9 @@ static int wm831x_gpio_probe(struct platform_device *pdev)
>  		wm831x_gpio->gpio_chip.base = pdata->gpio_base;
>  	else
>  		wm831x_gpio->gpio_chip.base = -1;
> +#ifdef CONFIG_OF_GPIO
> +	wm831x_gpio->gpio_chip.of_node = wm831x->dev->of_node;
> +#endif
>  
>  	ret = devm_gpiochip_add_data(&pdev->dev, &wm831x_gpio->gpio_chip,
>  				     wm831x_gpio);

-- 
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog

Re: [PATCH v5 3/3] mfd: wm831x: Add device tree binding document

[Lee Jones]

On Fri, 17 Mar 2017, Charles Keepax wrote:

> Add a device tree binding document for the wm831x series of PMICs.
> Currently only support for the registering the device and the GPIOs are
> actually implemented in the driver.
> 
> Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
> ---
> 
> Changes since v4:
>  - Removed one extra level of ../ for relative links that was incorrect
> 
> Thanks,
> Charles
> 
>  Documentation/devicetree/bindings/mfd/wm831x.txt | 81 ++++++++++++++++++++++++
>  MAINTAINERS                                      |  1 +
>  2 files changed, 82 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/mfd/wm831x.txt

Applied, thanks.

> diff --git a/Documentation/devicetree/bindings/mfd/wm831x.txt b/Documentation/devicetree/bindings/mfd/wm831x.txt
> new file mode 100644
> index 0000000..9f8b743
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/mfd/wm831x.txt
> @@ -0,0 +1,81 @@
> +Cirrus Logic/Wolfson Microelectronics wm831x PMICs
> +
> +System PMICs with a wide range of additional features.
> +
> +Required properties:
> +
> +  - compatible : One of the following chip-specific strings:
> +        "wlf,wm8310"
> +        "wlf,wm8311"
> +        "wlf,wm8312"
> +        "wlf,wm8320"
> +        "wlf,wm8321"
> +        "wlf,wm8325"
> +        "wlf,wm8326"
> +
> +  - reg : I2C slave address when connected using I2C, chip select number
> +    when using SPI.
> +
> +  - gpio-controller : Indicates this device is a GPIO controller.
> +  - #gpio-cells : Must be 2. The first cell is the pin number and the
> +    second cell is used to specify optional parameters (currently unused).
> +
> +  - interrupts : The interrupt line the IRQ signal for the device is
> +    connected to.
> +  - interrupt-parent : The parent interrupt controller.
> +
> +  - interrupt-controller : wm831x devices contain interrupt controllers and
> +    may provide interrupt services to other devices.
> +  - #interrupt-cells: Must be 2. The first cell is the IRQ number, and the
> +    second cell is the flags, encoded as the trigger masks from
> +    ../interrupt-controller/interrupts.txt
> +
> +Optional sub-nodes:
> +  - regulators : Contains sub-nodes for each of the regulators supplied by
> +    the device. The regulators are bound using their names listed below:
> +
> +    dcdc1 : DCDC1
> +    dcdc2 : DCDC2
> +    dcdc3 : DCDC3
> +    dcdc4 : DCDC3
> +    isink1 : ISINK1
> +    isink2 : ISINK2
> +    ldo1 : LDO1
> +    ldo2 : LDO2
> +    ldo3 : LDO3
> +    ldo4 : LDO4
> +    ldo5 : LDO5
> +    ldo7 : LDO7
> +    ldo11 : LDO11
> +
> +    The bindings details of each regulator can be found in:
> +    ../regulator/regulator.txt
> +
> +Example:
> +
> +wm8310: pmic@36 {
> +	compatible = "wlf,wm8310";
> +	reg = <0x36>;
> +
> +	gpio-controller;
> +	#gpio-cells = <2>;
> +
> +	interrupts = <347>;
> +	interrupt-parent = <&gic>;
> +
> +	interrupt-controller;
> +	#interrupt-cells = <2>;
> +
> +	regulators {
> +		dcdc1: dcdc1 {
> +			regulator-name = "DCDC1";
> +			regulator-min-microvolt = <600000>;
> +			regulator-max-microvolt = <600000>;
> +		};
> +		ldo1: ldo1 {
> +			regulator-name = "LDO1";
> +			regulator-min-microvolt = <1700000>;
> +			regulator-max-microvolt = <1700000>;
> +		};
> +	};
> +};
> diff --git a/MAINTAINERS b/MAINTAINERS
> index c265a5f..dfe761b 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -13600,6 +13600,7 @@ F:	Documentation/hwmon/wm83??
>  F:	Documentation/devicetree/bindings/extcon/extcon-arizona.txt
>  F:	Documentation/devicetree/bindings/regulator/arizona-regulator.txt
>  F:	Documentation/devicetree/bindings/mfd/arizona.txt
> +F:	Documentation/devicetree/bindings/mfd/wm831x.txt
>  F:	arch/arm/mach-s3c64xx/mach-crag6410*
>  F:	drivers/clk/clk-wm83*.c
>  F:	drivers/extcon/extcon-arizona.c

-- 
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog

[GIT PULL] Immutable branch between MFD and GPIO due for the v4.12 merge window

[Lee Jones]

Enjoy,

The following changes since commit c1ae3cfa0e89fa1a7ecc4c99031f5e9ae99d9201:

  Linux 4.11-rc1 (2017-03-05 12:59:56 -0800)

are available in the git repository at:

  git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd.git ib-mfd-gpio-v4.12

for you to fetch changes up to 9f7c7ceefe5e824e8333859bded12257a6d3548a:

  mfd: wm831x: Add device tree binding document (2017-03-23 11:46:00 +0000)

----------------------------------------------------------------
Immutable branch between MFD and GPIO due for the v4.12 merge window

----------------------------------------------------------------
Charles Keepax (3):
      mfd: wm831x: Add basic device tree binding
      gpio: wm831x: Add basic device tree support
      mfd: wm831x: Add device tree binding document

 Documentation/devicetree/bindings/mfd/wm831x.txt | 81 ++++++++++++++++++++++++
 MAINTAINERS                                      |  1 +
 drivers/gpio/gpio-wm831x.c                       |  5 +-
 drivers/mfd/wm831x-core.c                        | 29 ++++++---
 drivers/mfd/wm831x-i2c.c                         | 19 +++++-
 drivers/mfd/wm831x-irq.c                         |  6 +-
 drivers/mfd/wm831x-spi.c                         | 18 +++++-
 include/linux/mfd/wm831x/core.h                  |  9 ++-
 8 files changed, 152 insertions(+), 16 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/mfd/wm831x.txt

-- 
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog

Re: [PATCH v5 2/3] gpio: wm831x: Add basic device tree support

[Andy Shevchenko]

On Thu, Mar 23, 2017 at 1:47 PM, Lee Jones <lee.jones@linaro.org> wrote:
> On Fri, 17 Mar 2017, Charles Keepax wrote:
>
>> Now the wm831x-core has basic DT support we can update this driver to
>> allow use of the GPIOs within a device tree system.
>>
>> Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
>> Acked-by: Linus Walleij <linus.walleij@linaro.org>
>> ---
>>
>> No changes since v4, still should go through Lee's tree.
>>
>> Thanks,
>> Charles
>>
>>  drivers/gpio/gpio-wm831x.c | 5 ++++-
>>  1 file changed, 4 insertions(+), 1 deletion(-)
>
> Applied, thanks.

>> +#ifdef CONFIG_OF_GPIO
>> +     wm831x_gpio->gpio_chip.of_node = wm831x->dev->of_node;
>> +#endif

Just a bit of off topic.

If we can use struct fwnode_handle we might get rid of all those
CONFIG_OF_GPIO in the drivers.

-- 
With Best Regards,
Andy Shevchenko