linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Neil Armstrong <narmstrong@baylibre.com>
To: sboyd@codeaurora.org, khilman@baylibre.com, carlo@caione.org
Cc: Neil Armstrong <narmstrong@baylibre.com>,
	linux-amlogic@lists.infradead.org, linux-clk@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org, devicetree@vger.kernel.org
Subject: [PATCH v4 3/3] ARM64: dts: meson-gx: Add MALI nodes for GXBB and GXL
Date: Wed, 22 Mar 2017 11:18:55 +0100	[thread overview]
Message-ID: <1490177935-9646-4-git-send-email-narmstrong@baylibre.com> (raw)
In-Reply-To: <1490177935-9646-1-git-send-email-narmstrong@baylibre.com>

The same MALI-450 MP3 GPU is present in the GXBB and GXL SoCs.

The node is simply added in the meson-gxbb.dtsi file.

For GXL, since a lot is shared with the GXM that has a MALI-T820 IP, this
patch adds a new meson-gxl-mali.dtsi and is included in the SoC specific
dtsi files.

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
---
 arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi      | 37 ++++++++++++++++++++
 arch/arm64/boot/dts/amlogic/meson-gxl-mali.dtsi  | 43 ++++++++++++++++++++++++
 arch/arm64/boot/dts/amlogic/meson-gxl-s905d.dtsi |  1 +
 arch/arm64/boot/dts/amlogic/meson-gxl-s905x.dtsi |  1 +
 4 files changed, 82 insertions(+)
 create mode 100644 arch/arm64/boot/dts/amlogic/meson-gxl-mali.dtsi

diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi
index 04b3324..0617a3d 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi
@@ -478,6 +478,43 @@
 	};
 };
 
+&apb {
+	mali: gpu@c0000 {
+		compatible = "amlogic,meson-gxbb-mali", "arm,mali-450";
+		reg = <0x0 0xc0000 0x0 0x40000>;
+		interrupts = <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 166 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "gp", "gpmmu", "pp", "pmu",
+			"pp0", "ppmmu0", "pp1", "ppmmu1",
+			"pp2", "ppmmu2";
+		clocks = <&clkc CLKID_CLK81>, <&clkc CLKID_MALI>;
+		clock-names = "bus", "core";
+
+		/*
+		 * Mali clocking is provided by two identical clock paths
+		 * MALI_0 and MALI_1 muxed to a single clock by a glitch
+		 * free mux to safely change frequency while running.
+		 */
+		assigned-clocks = <&clkc CLKID_MALI_0_SEL>,
+				  <&clkc CLKID_MALI_0>,
+				  <&clkc CLKID_MALI>; /* Glitch free mux */
+		assigned-clock-parents = <&clkc CLKID_FCLK_DIV3>,
+					 <0>, /* Do Nothing */
+					 <&clkc CLKID_MALI_0>;
+		assigned-clock-rates = <0>, /* Do Nothing */
+				       <666666666>,
+				       <0>; /* Do Nothing */
+	};
+};
+
 &i2c_A {
 	clocks = <&clkc CLKID_I2C>;
 };
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-mali.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxl-mali.dtsi
new file mode 100644
index 0000000..f06cc234
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/meson-gxl-mali.dtsi
@@ -0,0 +1,43 @@
+/*
+ * Copyright (c) 2017 BayLibre SAS
+ * Author: Neil Armstrong <narmstrong@baylibre.com>
+ *
+ * SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+ */
+
+&apb {
+	mali: gpu@c0000 {
+		compatible = "amlogic,meson-gxbb-mali", "arm,mali-450";
+		reg = <0x0 0xc0000 0x0 0x40000>;
+		interrupts = <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 166 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "gp", "gpmmu", "pp", "pmu",
+			"pp0", "ppmmu0", "pp1", "ppmmu1",
+			"pp2", "ppmmu2";
+		clocks = <&clkc CLKID_CLK81>, <&clkc CLKID_MALI>;
+		clock-names = "bus", "core";
+
+		/*
+		 * Mali clocking is provided by two identical clock paths
+		 * MALI_0 and MALI_1 muxed to a single clock by a glitch
+		 * free mux to safely change frequency while running.
+		 */
+		assigned-clocks = <&clkc CLKID_MALI_0_SEL>,
+				  <&clkc CLKID_MALI_0>,
+				  <&clkc CLKID_MALI>; /* Glitch free mux */
+		assigned-clock-parents = <&clkc CLKID_FCLK_DIV3>,
+					 <0>, /* Do Nothing */
+					 <&clkc CLKID_MALI_0>;
+		assigned-clock-rates = <0>, /* Do Nothing */
+				       <666666666>,
+				       <0>; /* Do Nothing */
+	};
+};
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905d.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxl-s905d.dtsi
index 615308e..5a90e30 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxl-s905d.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905d.dtsi
@@ -42,6 +42,7 @@
  */
 
 #include "meson-gxl.dtsi"
+#include "meson-gxl-mali.dtsi"
 
 / {
 	compatible = "amlogic,s905d", "amlogic,meson-gxl";
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x.dtsi
index 08237ee..0f78d83 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x.dtsi
@@ -42,6 +42,7 @@
  */
 
 #include "meson-gxl.dtsi"
+#include "meson-gxl-mali.dtsi"
 
 / {
 	compatible = "amlogic,s905x", "amlogic,meson-gxl";
-- 
1.9.1

  parent reply	other threads:[~2017-03-22 10:26 UTC|newest]

Thread overview: 9+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-03-22 10:18 [PATCH v4 0/3] meson-gx: Add mali-450 support Neil Armstrong
2017-03-22 10:18 ` [PATCH v4 1/3] clk: meson-gxbb: Add MALI clock IDS Neil Armstrong
2017-03-22 10:18 ` [PATCH v4 2/3] clk: meson-gxbb: Add MALI clocks Neil Armstrong
2017-04-05 19:43   ` Stephen Boyd
2017-03-22 10:18 ` Neil Armstrong [this message]
2017-03-24 19:20   ` [PATCH v4 3/3] ARM64: dts: meson-gx: Add MALI nodes for GXBB and GXL Kevin Hilman
2017-03-27 19:53     ` Michael Turquette
2017-03-28 14:49       ` Kevin Hilman
2017-03-28 14:51         ` Neil Armstrong

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1490177935-9646-4-git-send-email-narmstrong@baylibre.com \
    --to=narmstrong@baylibre.com \
    --cc=carlo@caione.org \
    --cc=devicetree@vger.kernel.org \
    --cc=khilman@baylibre.com \
    --cc=linux-amlogic@lists.infradead.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-clk@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=sboyd@codeaurora.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).