* [PATCH] usb: dwc2: resume root hub to handle disconnect of device
@ 2017-05-27 3:23 William Wu
0 siblings, 0 replies; only message in thread
From: William Wu @ 2017-05-27 3:23 UTC (permalink / raw)
To: balbi, gregkh
Cc: heiko, linux-kernel, linux-usb, linux-rockchip, frank.wang,
huangtao, daniel.meng, william.wu
When handle disconnect of the hcd during bus_suspend, hcd
needs to resume its root hub, otherwise the root hub will
not disconnect the existing devices under its port.
This issue always happens when connecting with usb devices
which support auto-suspend function (e.g. usb hub).
Signed-off-by: William Wu <william.wu@rock-chips.com>
---
drivers/usb/dwc2/hcd.c | 12 +++++++-----
1 file changed, 7 insertions(+), 5 deletions(-)
diff --git a/drivers/usb/dwc2/hcd.c b/drivers/usb/dwc2/hcd.c
index 740c7e8..cc84f97 100644
--- a/drivers/usb/dwc2/hcd.c
+++ b/drivers/usb/dwc2/hcd.c
@@ -1975,11 +1975,13 @@ void dwc2_hcd_disconnect(struct dwc2_hsotg *hsotg, bool force)
* Without the extra check here we will end calling disconnect
* and won't get any future interrupts to handle the connect.
*/
- if (!force) {
- hprt0 = dwc2_readl(hsotg->regs + HPRT0);
- if (!(hprt0 & HPRT0_CONNDET) && (hprt0 & HPRT0_CONNSTS))
- dwc2_hcd_connect(hsotg);
- }
+ hprt0 = dwc2_readl(hsotg->regs + HPRT0);
+
+ if (!force && !(hprt0 & HPRT0_CONNDET) &&
+ (hprt0 & HPRT0_CONNSTS))
+ dwc2_hcd_connect(hsotg);
+ else if (hsotg->lx_state != DWC2_L0)
+ usb_hcd_resume_root_hub(hsotg->priv);
}
/**
--
2.0.0
^ permalink raw reply related [flat|nested] only message in thread
only message in thread, other threads:[~2017-05-27 3:24 UTC | newest]
Thread overview: (only message) (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2017-05-27 3:23 [PATCH] usb: dwc2: resume root hub to handle disconnect of device William Wu
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).