[PATCH v3 0/6] perf: Support for ARM DynamIQ Shared Unit PMU

From: Suzuki K Poulose <suzuki.poulose@arm.com>
To: linux-arm-kernel@lists.infradead.org
Cc: linux-kernel@vger.kernel.org, will.deacon@arm.com,
	marc.zyngier@arm.com, mark.rutland@arm.com, sudeep.holla@arm.com,
	mathieu.poirier@linaro.org, Jonathan.Cameron@huawei.com,
	Suzuki K Poulose <suzuki.poulose@arm.com>
Subject: [PATCH v3 0/6] perf: Support for ARM DynamIQ Shared Unit PMU
Date: Thu, 27 Jul 2017 16:10:12 +0100	[thread overview]
Message-ID: <1501168218-26741-1-git-send-email-suzuki.poulose@arm.com> (raw)

This series adds support for the PMU in ARM DynamIQ Shared Unit (DSU).
The DSU integrates one or more cores with an L3 memory system, control
logic, and external interfaces to form a multicore cluster. The PMU
allows counting the various events related to L3, SCU etc, using 32bit
independent counters along with providing a 64bit cycle counter.

The PMU can only be accessed via CPU system registers, which are common
to the cores connected to the same DSU. The PMU registers follow the
semantics of the ARMv8 PMU, mostly, with the exception that
the counters record the cluster wide events.

Tested on a Fast model with DSU. The driver only supports ARM64 at the
moment. It can be extended to support ARM32 by providing register
accessors like we do in arch/arm64/include/arm_dsu_pmu.h.

The firmware should setup appropriate bits in the ACTLR_EL3/EL2 to
allow EL1 access to the PMU registers.

Series applies on v4.13-rc2 and is also available at:

  git://linux-arm.org/linux-skp.git 4.13/dsu-v3

Changes since V2:
 - Cleanup dsu_pmu_device_probe error handling.
 - Fix event validate_group to invert the result check of validate_event
 - Return errors if we failed to parse CPUs in the DSU.
 - Add MODULE_DEVICE_TABLE entry
 - Use hlist_entry_safe for converting cpuhp_node to dsu_pmu.
 - Added Reviews and Acks.

Changes since V1:
 - Use the new of_device_node_get_cpu() helper for Coresight
 - Rebased to 4.13-rc2

Suzuki K Poulose (6):
  perf: Export perf_event_update_userpage
  of: Add helper for mapping device node to logical CPU number
  coresight: of: Use of_device_node_get_cpu helper
  irqchip: gic-v3: Use of_device_node_get_cpu helper
  dt-bindings: Document devicetree binding for ARM DSU PMU
  perf: ARM DynamIQ Shared Unit PMU support

 .../devicetree/bindings/arm/arm-dsu-pmu.txt        |  27 +
 arch/arm64/include/asm/arm_dsu_pmu.h               | 124 +++
 drivers/hwtracing/coresight/of_coresight.c         |  20 +-
 drivers/irqchip/irq-gic-v3.c                       |  30 +-
 drivers/of/base.c                                  |  26 +
 drivers/perf/Kconfig                               |   9 +
 drivers/perf/Makefile                              |   1 +
 drivers/perf/arm_dsu_pmu.c                         | 883 +++++++++++++++++++++
 include/linux/of_device.h                          |   7 +
 kernel/events/core.c                               |   1 +
 10 files changed, 1087 insertions(+), 41 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/arm/arm-dsu-pmu.txt
 create mode 100644 arch/arm64/include/asm/arm_dsu_pmu.h
 create mode 100644 drivers/perf/arm_dsu_pmu.c

-- 
2.7.5