* [GIT PULL] first round of SCSI updates for the 4.13+ merge window
@ 2017-09-07 21:58 James Bottomley
0 siblings, 0 replies; only message in thread
From: James Bottomley @ 2017-09-07 21:58 UTC (permalink / raw)
To: Andrew Morton, Linus Torvalds; +Cc: linux-scsi, linux-kernel
This is mostly updates of the usual suspects: lpfc, qla2xxx, hisi_sas,
megaraid_sas, zfcp and a host of minor updates.
The major driver change here is the elimination of the block based
cciss driver in favour of the SCSI based hpsa driver (which now drives
all the legacy cases cciss used to be required for). Plus a reset
handler clean up and the redo of the SAS SMP handler to use bsg lib.
Note there's a conflict with this and some of the staging updates for
the vishorba driver which are fairly trivial to resolve.
The patch is available here:
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi.git scsi-misc
The short changelog is:
Arnd Bergmann (8):
scsi: lpfc: avoid false-positive gcc-8 warning
scsi: lpfc: avoid an unused function warning
scsi: fusion: fix string overflow warning
scsi: gdth: increase the procfs event buffer size
scsi: fnic: fix format string overflow warning
scsi: gdth: avoid buffer overflow warning
scsi: mpt3sas: fix format overflow warning
scsi: megaraid: fix format-overflow warning
Arvind Yadav (4):
scsi: ibmvfc: ibmvscsi: ibmvscsi_tgt: constify vio_device_id
scsi: aha1542: constify pnp_device_id
scsi: ncr5380: constify pnp_device_id
scsi: esas2r: constify pci_device_id.
Bart Van Assche (24):
scsi: scsi-mq: Always unprepare before requeuing a request
scsi: Show .retries and .jiffies_at_alloc in debugfs
scsi: Improve requeuing behavior
scsi: Call scsi_initialize_rq() for filesystem requests
scsi: Rework handling of scsi_device.vpd_pg8[03]
scsi: Rework the code for caching Vital Product Data (VPD)
scsi: rcu: Introduce rcu_swap_protected()
scsi: iscsi_tcp: Remove a set-but-not-used variable
scsi: scsi_debug: Remove a set-but-not-used variable
scsi: scsi_transport_srp: Suppress a W=1 compiler warning
scsi: scsi_transport_sas: Check kzalloc() return value
scsi: libsas: Annotate fall-through in a switch statement
scsi: libsas: Remove a set-but-not-used variable
scsi: libiscsi: Fix indentation
scsi: sg: Fix type of last blk_trace_setup() argument
scsi: sd: Remove a useless comparison
scsi: sd: Fix indentation
scsi: sd: sr: Convert two assignments into warning statements
scsi: Use blk_mq_rq_to_pdu() to convert a request to a SCSI command pointer
scsi: Document which queue type a function is intended for
scsi: Convert a strncmp() call into a strcmp() call
scsi: Suppress gcc 7 fall-through warnings reported with W=1
scsi: Avoid sign extension of scsi_device.type
scsi: Remove an obsolete function declaration
Benjamin Block (3):
scsi: zfcp: add handling for FCP_RESID_OVER to the fcp ingress path
scsi: zfcp: convert bool-definitions to use 'true' instead of '1'
MAINTAINERS: Add myself to S390 ZFCP DRIVER as a co-maintainer
Bhumika Goyal (2):
scsi: make device_type const
arcmsr: add const to bin_attribute structures
Bodo Stroesser (1):
scsi: st: fix blk_get_queue usage
Brian King (4):
scsi: aacraid: Fix command send race condition
scsi: ipr: Set no_report_opcodes for RAID arrays
scsi: ses: Fix wrong page error
scsi: ipr: Fix scsi-mq lockdep issue
Calvin Owens (1):
scsi: ses: Fix racy cleanup of /sys in remove_dev()
Chad Dupuis (6):
scsi: qedf: Update driver version to 8.20.5.0.
scsi: qedf: Fix up modinfo parameter name for 'debug' in modinfo output.
scsi: qedf: Covert single-threaded workqueues to regular workqueues.
scsi: qedf: Corrent VLAN tag insertion in fallback VLAN case.
scsi: qedf: Use granted MAC from the FCF for the FCoE source address if it is available.
scsi: qedf: Set WWNN and WWPN based on values from qed.
Christoph Hellwig (5):
scsi: scsi_transport_sas: switch to bsg-lib for SMP passthrough
scsi: smartpqi: remove the smp_handler stub
scsi: hpsa: remove the smp_handler stub
scsi: bsg-lib: pass the release callback through bsg_setup_queue
Revert "scsi: default to scsi-mq"
Christophe JAILLET (3):
scsi: cxlflash: Fix an error handling path in 'cxlflash_disk_attach()'
scsi: qedf: Fix a potential NULL pointer dereference
scsi: mpt3sas: Fix memory allocation failure test in 'mpt3sas_base_attach()'
Colin Ian King (4):
scsi: qla2xxx: fix spelling mistake of variable sfp_additonal_info
scsi: osst: add missing indent on a for loop statement
scsi: mpt3sas: fix pr_info message continuation
scsi: dpt_i2o: remove redundant null check on array device
Corentin Labbe (1):
scsi: zfcp: Remove unneeded linux/miscdevice.h include
Damien Le Moal (1):
scsi: sd_zbc: Write unlock zone from sd_uninit_cmnd()
Dan Carpenter (6):
scsi: qla2xxx: Fix an integer overflow in sysfs code
scsi: qedi: off by one in qedi_get_cmd_from_tid()
scsi: hpsa: fix the device_id in hpsa_update_device_info()
scsi: osst: silence underflow warning in osst_verify_frame()
scsi: sg: off by one in sg_ioctl()
scsi: aacraid: reading out of bounds
Darren Trap (2):
scsi: qla2xxx: Clear fc4f_nvme flag
scsi: qla2xxx: Fix WWPN/WWNN in debug message
Dick Kennedy (17):
scsi: lpfc: lpfc version bump 11.4.0.3
scsi: lpfc: Fix bad sgl reposting after 2nd adapter reset
scsi: lpfc: Fix nvme target failure after 2nd adapter reset
scsi: lpfc: Fix relative offset error on large nvmet target ios
scsi: lpfc: Fix MRQ > 1 context list handling
scsi: lpfc: Limit amount of work processed in IRQ
scsi: lpfc: Correct issues with FAWWN and FDISCs
scsi: lpfc: Fix NVME PRLI handling during RSCN
scsi: lpfc: Fix crash in lpfc nvmet when fc port is reset
scsi: lpfc: Fix duplicate NVME rport entries and namespaces.
scsi: lpfc: Fix handling of FCP and NVME FC4 types in Pt2Pt topology
scsi: lpfc: Correct return error codes to align with nvme_fc transport
scsi: lpfc: convert info messages to standard messages
scsi: lpfc: Fix oops when NVME Target is discovered in a nonNVME environment
scsi: lpfc: Fix rediscovery on switch blade pull
scsi: lpfc: Fix loop mode target discovery
scsi: lpfc: Fix plogi collision that causes illegal state transition
Duane Grigsby (3):
scsi: qla2xxx: Fix system panic due to pointer access problem
scsi: qla2xxx: Add command completion for error path
scsi: qla2xxx: Added change to enable ZIO for FC-NVMe devices
Finn Thain (7):
scsi: esp_scsi: Always clear msg_out_len after MESSAGE OUT phase
scsi: esp_scsi: Avoid sending ABORT TASK SET messages
scsi: esp_scsi: Clean up control flow and dead code
scsi: mac_esp: Fix PIO transfers for MESSAGE IN phase
scsi: mac_esp: Avoid type warning from sparse
scsi: g_NCR5380: Use unambiguous terminology for PDMA send and receive
scsi: g_NCR5380: Cleanup comments and whitespace
Giridhar Malavali (1):
scsi: qla2xxx: Ability to process multiple SGEs in Command SGL for CT passthrough commands.
Greg Kroah-Hartman (1):
scsi: remove DRIVER_ATTR() usage
Gustavo A. R. Silva (2):
scsi: lpfc: remove useless code in lpfc_sli4_bsg_link_diag_test
scsi: pmcraid: fix duplicated code for different branches
Hannes Reinecke (47):
scsi: qlogicpti: fixup qlogicpti_reset() definition
scsi: mptsas: Fixup device hotplug for VMWare ESXi
scsi: eata: remove 'arg_done' from eata2x_eh_host_reset()
scsi: visorhba: sanitze private device data allocation
scsi: megaraid_mbox: drop duplicate bus reset and device reset function
scsi: bnx2fc: remove obsolete bnx2fc_eh_host_reset() definition
scsi: 53c700: move bus reset to host reset
scsi: aha152x: drop host reset
scsi: nsp32: drop bus reset
scsi: qedf: drop bus reset handler
scsi: ppa: drop duplicate bus_reset handler
scsi: imm: drop duplicate bus_reset handler
scsi: qlogicfas: move bus_reset to host_reset
scsi: NCR5380: Move bus reset to host reset
scsi: acornscsi: move bus reset to host reset
scsi: qlogicpti: move bus reset to host reset
scsi: rtsx: drop bus reset function
scsi: drop bus reset for wd33c93-compatible boards
scsi: fdomain: move bus reset to host reset
scsi: hptiop: Simplify reset handling
scsi: bfa: move bus reset to target reset
scsi: libsas: move bus_reset_handler() to target_reset_handler()
scsi: uas: move eh_bus_reset_handler to eh_device_reset_handler
scsi: fnic: do not call host reset from command abort
scsi: fc_fcp: do not call fc_block_scsi_eh() from host reset
scsi: ibmvfc: Do not call fc_block_scsi_eh() on host reset
scsi: mptfc: Do not call fc_block_scsi_eh() on host reset
scsi: fix comment in scsi_device_set_state()
scsi: ch: add refcounting
scsi: ses: make page2 support optional
scsi: ses: Fixup error message 'failed to get diagnostic page 0xffffffea'
scsi: ses: check return code from ses_recv_diag()
scsi: hpsa: Remove 'hpsa_allow_any' module option
scsi: cciss: Drop obsolete driver
scsi: hpsa: do not print errors for unsupported report luns format
scsi: hpsa: Ignore errors for unsupported LV_DEVICE_ID VPD page
scsi: hpsa: disable volume status check for legacy boards
scsi: hpsa: add support for legacy boards
scsi: make 'state' device attribute pollable
scsi: scsi_lib: rework scsi_internal_device_unblock_nowait()
scsi: aacraid: complete all commands during bus reset
scsi: aacraid: add fib flag to mark scsi command callback
scsi: aacraid: enable sending of TMFs from aac_hba_send()
scsi: aacraid: use aac_tmf_callback for reset fib
scsi: aacraid: split off device, target, and bus reset
scsi: aacraid: split off host reset
scsi: aacraid: split off functions to generate reset FIB
Helge Deller (1):
scsi: sym53c8xx: Avoid undefined behaviour
James Smart (2):
scsi: lpfc: Add Buffer to Buffer credit recovery support
scsi: lpfc: remove console log clutter
Joe Carnuccio (10):
scsi: qla2xxx: Skip zero queue count entry during FW dump capture
scsi: qla2xxx: Add LR distance support from nvram bit
scsi: qla2xxx: Remove potential macro parameter side-effect in ql_dump_regs()
scsi: qla2xxx: Print correct mailbox registers in failed summary
scsi: qla2xxx: Allow SNS fabric login to be retried
scsi: qla2xxx: Add timeout ability to wait_for_sess_deletion().
scsi: qla2xxx: Move logging default mask to execute once only.
scsi: qla2xxx: Use sp->free instead of hard coded call.
scsi: qla2xxx: Prevent sp->free null/uninitialized pointer dereference.
scsi: qla2xxx: Correction to vha->vref_count timeout
Johannes Thumshirn (2):
scsi: qla2xxx: add missing includes for qla_isr
scsi: sg: only check for dxfer_len greater than 256M
John Garry (4):
scsi: hisi_sas: remove driver versioning
scsi: hisi_sas: replace kfree with scsi_host_put
scsi: hisi_sas: remove phy_down_v3_hw() res variable
scsi: hisi_sas: use array for v2 hw ECC errors
Jonathan Corbet (1):
scsi: Fix the kerneldoc for scsi_initialize_rq()
Kevin Barnett (7):
scsi: smartpqi: change driver version to 1.1.2-125
scsi: smartpqi: add in new controller ids
scsi: smartpqi: update kexec and power down support
scsi: smartpqi: cleanup doorbell register usage.
scsi: smartpqi: update pqi passthru ioctl
scsi: smartpqi: enhance BMIC cache flush
scsi: smartpqi: add pqi reset quiesce support
LABBE Corentin (1):
scsi: zfcp: replace zfcp_qdio_sbale_count by sg_nents
Long Li (1):
scsi: storvsc: fix memory leak on ring buffer busy
Lukáš Korenčik (1):
scsi: zfcp: use setup_timer instead of init_timer
Manish Rangankar (1):
scsi: qedi: Limit number for CQ queues.
Martin Peschke (4):
scsi: zfcp: early returns for traces disabled via level
scsi: zfcp: clean up unnecessary module_param_named() with no_auto_port_rescan
scsi: zfcp: clean up a member of struct zfcp_qdio that was assigned but never used
scsi: zfcp: clean up redundant code with fall through in link down SRB switch case
Matthew R. Ochs (2):
scsi: cxlflash: Avoid double mutex unlock
scsi: cxlflash: Remove unnecessary existence check
Maurizio Lombardi (1):
scsi: lpfc: fix "integer constant too large" error on 32bit archs
Michael Hernandez (3):
scsi: qla2xxx: Increase ql2xmaxqdepth to 64
scsi: qla2xxx: Fix target multiqueue configuration
scsi: qla2xxx: Fix system crash while triggering FW dump
Michał Mirosław (3):
scsi: aic7xxx: regenerate firmware files
scsi: aic7xxx: fix firmware build deps
scsi: aic7xxx: remove empty function
Nikola Pajkovsky (3):
scsi: aacraid: report -ENOMEM to upper layer from aac_convert_sgraw2()
scsi: aacraid: get rid of one level of indentation
scsi: aacraid: fix indentation errors
Ondrej Zary (4):
scsi: g_NCR5380: Two DTC436 PDMA workarounds
scsi: g_NCR5380: Re-work PDMA loops
scsi: g_NCR5380: End PDMA transfer correctly on target disconnection
scsi: g_NCR5380: Fix PDMA transfer size
Pan Bian (3):
scsi: qla2xxx: use dma_mapping_error to check map errors
scsi: mvsas: replace kfree with scsi_host_put
scsi: pm8001: fix double free in pm8001_pci_probe
Prabu Thangamuthu (1):
scsi: ufs: changing maintainer
Quinn Tran (10):
scsi: qla2xxx: Reset the logo flag, after target re-login.
scsi: qla2xxx: Fix slow mem alloc behind lock
scsi: qla2xxx: Recheck session state after RSCN
scsi: qla2xxx: Cleanup NPIV host in target mode during config teardown
scsi: qla2xxx: Fix task mgmt handling for NPIV
scsi: qla2xxx: Add ability to autodetect SFP type
scsi: qla2xxx: Use fabric name for Get Port Speed command
scsi: qla2xxx: Change ha->wq max_active value to default
scsi: qla2xxx: Remove extra register read
scsi: qla2xxx: Fix NPIV host enable after chip reset
Raghava Aditya Renukunta (1):
scsi: aacraid: Fix out of bounds in aac_get_name_resp
Richard W.M. Jones (2):
scsi: virtio: virtio_scsi: Set can_queue to the length of the virtqueue.
scsi: virtio: Reduce BUG if total_sg > virtqueue size to WARN.
Rob Herring (1):
scsi: Convert to using %pOF instead of full_name
Romain Perier (7):
scsi: pmcraid: Replace PCI pool old API
scsi: mvsas: Replace PCI pool old API
scsi: mpt3sas: Replace PCI pool old API
scsi: megaraid: Replace PCI pool old API
scsi: lpfc: Replace PCI pool old API
scsi: csiostor: Replace PCI pool old API
scsi: be2iscsi: Replace PCI pool old API
Sawan Chandak (4):
scsi: qla2xxx: Do not call abort handler function during chip reset
scsi: qla2xxx: Add support for minimum link speed
scsi: qla2xxx: Use BIT_6 to acquire FAWWPN from switch
scsi: qla2xxx: Handle PCIe error for driver
Shivasharan S (14):
scsi: megaraid_sas: driver version upgrade
scsi: megaraid_sas: call megasas_dump_frame with correct IO frame size
scsi: megaraid_sas: modified few prints in OCR and IOC INIT path
scsi: megaraid_sas: replace internal FALSE/TRUE definitions with false/true
scsi: megaraid_sas: Return pended IOCTLs with cmd_status MFI_STAT_WRONG_STATE in case adapter is dead
scsi: megaraid_sas: use vmalloc for crash dump buffers and driver's local RAID map
scsi: megaraid_sas: Use SMID for Task abort case only
scsi: megaraid_sas: Check valid aen class range to avoid kernel panic
scsi: megaraid_sas: Fix endianness issues in DCMD handling
scsi: megaraid_sas: Do not re-fire shutdown DCMD after OCR
scsi: megaraid_sas: Call megasas_complete_cmd_dpc_fusion every 1 second while there are pending commands
scsi: megaraid_sas: Use synchronize_irq in target reset case
scsi: megaraid_sas: set minimum value of resetwaittime to be 1 secs
scsi: megaraid_sas: mismatch of allocated MFI frame size and length exposed in MFI MPT pass through command
Steffen Maier (14):
scsi: zfcp: clean up no longer existent prototype from zfcp API header
scsi: zfcp: fix kernel doc comment typos for struct zfcp_dbf_scsi
scsi: zfcp: use endianness conversions with common FC(P) struct fields
scsi: zfcp: use common code fcp_cmnd and fcp_resp with union in fsf_qtcb_bottom_io
scsi: zfcp: clarify that we don't need "link" test on failed open port
scsi: zfcp: more fitting constant for fc_ct_hdr.ct_reason on port scan response
scsi: zfcp: trace high part of "new" 64 bit SCSI LUN
scsi: zfcp: trace HBA FSF response by default on dismiss or timedout late response
scsi: zfcp: fix payload with full FCP_RSP IU in SCSI trace records
scsi: zfcp: fix missing trace records for early returns in TMF eh handlers
scsi: zfcp: fix passing fsf_req to SCSI trace on TMF to correlate with HBA
scsi: zfcp: fix capping of unsuccessful GPN_FT SAN response trace records
scsi: zfcp: fix queuecommand for scsi_eh commands when DIX enabled
scsi: fc: start decoupling fc_block_scsi_eh from scsi_cmnd
Thomas Bogendoerfer (1):
scsi: qedf: Limit number of CQs
Thomas Gleixner (5):
scsi: bnx2i: Simplify cpu hotplug code
scsi: bnx2fc: Simplify CPU hotplug code
scsi: bnx2i: Prevent recursive cpuhotplug locking
scsi: bnx2fc: Prevent recursive cpuhotplug locking
scsi: bnx2fc: Plug CPU hotplug race
Todd Poynor (2):
scsi: sg: protect against races between mmap() and SG_SET_RESERVED_SIZE
scsi: sg: recheck MMAP_IO request length with lock held
Uma Krishnan (1):
scsi: cxlflash: Fix vlun resize failure in the shrink path
Varun Prakash (3):
scsi: cxgb4i: call neigh_event_send() to update MAC address
scsi: csiostor: fail probe if fw does not support FCoE
scsi: libcxgbi: use ndev->ifindex to find route
Xiang Chen (12):
scsi: hisi_sas: add phy_set_linkrate_v3_hw()
scsi: hisi_sas: update some v3 register init settings
scsi: hisi_sas: add reset handler for v3 hw
scsi: hisi_sas: kill tasklet when destroying irq in v3 hw
scsi: hisi_sas: fix v3 hw channel interrupt processing
scsi: hisi_sas: Modify v3 hw STP_LINK_TIMER setting
scsi: hisi_sas: add status and command buffer for internal abort
scsi: hisi_sas: service interrupt ITCT_CLR interrupt in v2 hw
scsi: hisi_sas: add irq and tasklet cleanup in v2 hw
scsi: hisi_sas: remove repeated device config in v2 hw
scsi: hisi_sas: fix v2 hw underflow residual value
scsi: hisi_sas: avoid potential v2 hw interrupt issue
Xiaofei Tan (3):
scsi: hisi_sas: support zone management commands
scsi: hisi_sas: add v2 hw DFX feature
scsi: hisi_sas: fix reset and port ID refresh issues
Zang Leigang (1):
scsi: ufs: reqs and tasks were put in the wrong order
himanshu.madhani@cavium.com (7):
scsi: qla2xxx: Update driver version to 10.00.00.01-k
scsi: qla2xxx: Enable Async TMF processing
scsi: qla2xxx: Update fw_started flags at qpair creation.
scsi: qla2xxx: Fix remoteport disconnect for FC-NVMe
scsi: qla2xxx: Simpify unregistration of FC-NVMe local/remote ports
scsi: qla2xxx: Move function prototype to correct header
scsi: qla2xxx: Cleanup FC-NVMe code
weiping (1):
scsi: megaraid_sas: fix allocate instance->pd_info twice
weiping zhang (3):
scsi: sd: remove duplicated setting of gd->minors
scsi: scsi-sysfs: Adjust error returned for adapter reset request
scsi: megaraid_sas: fix error handle in megasas_probe_one
And the diffstat:
Documentation/blockdev/cciss.txt | 194 -
MAINTAINERS | 14 +-
block/bsg-lib.c | 7 +-
drivers/block/Kconfig | 27 -
drivers/block/Makefile | 1 -
drivers/block/cciss.c | 5415 ----------------------
drivers/block/cciss.h | 433 --
drivers/block/cciss_cmd.h | 269 --
drivers/block/cciss_scsi.c | 1653 -------
drivers/block/cciss_scsi.h | 79 -
drivers/message/fusion/mptbase.c | 8 +-
drivers/message/fusion/mptfc.c | 10 +-
drivers/message/fusion/mptsas.c | 86 +-
drivers/s390/scsi/zfcp_aux.c | 1 -
drivers/s390/scsi/zfcp_dbf.c | 95 +-
drivers/s390/scsi/zfcp_dbf.h | 25 +-
drivers/s390/scsi/zfcp_erp.c | 5 +-
drivers/s390/scsi/zfcp_ext.h | 1 -
drivers/s390/scsi/zfcp_fc.c | 52 +-
drivers/s390/scsi/zfcp_fc.h | 25 +-
drivers/s390/scsi/zfcp_fsf.c | 35 +-
drivers/s390/scsi/zfcp_fsf.h | 12 +-
drivers/s390/scsi/zfcp_qdio.c | 2 +-
drivers/s390/scsi/zfcp_qdio.h | 17 -
drivers/s390/scsi/zfcp_scsi.c | 18 +-
drivers/scsi/53c700.c | 23 +-
drivers/scsi/Kconfig | 11 +
drivers/scsi/NCR5380.c | 4 +-
drivers/scsi/a2091.c | 17 -
drivers/scsi/a3000.c | 17 -
drivers/scsi/aacraid/aachba.c | 341 +-
drivers/scsi/aacraid/aacraid.h | 3 +-
drivers/scsi/aacraid/comminit.c | 6 +-
drivers/scsi/aacraid/commsup.c | 3 +-
drivers/scsi/aacraid/linit.c | 320 +-
drivers/scsi/aha152x.c | 13 +-
drivers/scsi/aha1542.c | 2 +-
drivers/scsi/aic7xxx/Makefile | 6 +-
drivers/scsi/aic7xxx/aic79xx_reg.h_shipped | 1469 ++----
drivers/scsi/aic7xxx/aic79xx_reg_print.c_shipped | 34 +-
drivers/scsi/aic7xxx/aic7xxx_core.c | 1 -
drivers/scsi/aic7xxx/aic7xxx_osm.c | 5 -
drivers/scsi/aic7xxx/aic7xxx_osm.h | 1 -
drivers/scsi/aic7xxx/aic7xxx_reg.h_shipped | 44 +-
drivers/scsi/aic94xx/aic94xx_init.c | 6 +-
drivers/scsi/arcmsr/arcmsr_attr.c | 6 +-
drivers/scsi/arm/acornscsi.c | 11 +-
drivers/scsi/arm/cumana_1.c | 2 +-
drivers/scsi/arm/oak.c | 2 +-
drivers/scsi/atari_scsi.c | 6 +-
drivers/scsi/be2iscsi/be_iscsi.c | 6 +-
drivers/scsi/be2iscsi/be_main.c | 6 +-
drivers/scsi/be2iscsi/be_main.h | 2 +-
drivers/scsi/bfa/bfad_im.c | 37 +-
drivers/scsi/bnx2fc/bnx2fc.h | 1 -
drivers/scsi/bnx2fc/bnx2fc_fcoe.c | 68 +-
drivers/scsi/bnx2fc/bnx2fc_hwi.c | 45 +-
drivers/scsi/bnx2i/bnx2i_init.c | 64 +-
drivers/scsi/ch.c | 22 +-
drivers/scsi/csiostor/csio_hw.c | 4 +-
drivers/scsi/csiostor/csio_hw.h | 2 +-
drivers/scsi/csiostor/csio_init.c | 23 +-
drivers/scsi/csiostor/csio_scsi.c | 6 +-
drivers/scsi/cxgbi/cxgb4i/cxgb4i.c | 3 +
drivers/scsi/cxgbi/libcxgbi.c | 27 +-
drivers/scsi/cxlflash/main.c | 3 +-
drivers/scsi/cxlflash/superpipe.c | 14 +-
drivers/scsi/cxlflash/vlun.c | 6 +-
drivers/scsi/dmx3191d.c | 2 +-
drivers/scsi/dpt_i2o.c | 5 -
drivers/scsi/eata.c | 9 +-
drivers/scsi/esas2r/esas2r_main.c | 2 +-
drivers/scsi/esp_scsi.c | 53 +-
drivers/scsi/esp_scsi.h | 1 -
drivers/scsi/fcoe/fcoe_sysfs.c | 4 +-
drivers/scsi/fdomain.c | 6 +-
drivers/scsi/fdomain.h | 2 +-
drivers/scsi/fnic/fnic.h | 2 +-
drivers/scsi/fnic/fnic_scsi.c | 4 -
drivers/scsi/g_NCR5380.c | 283 +-
drivers/scsi/gdth.c | 2 +-
drivers/scsi/gdth_proc.c | 2 +-
drivers/scsi/gvp11.c | 18 -
drivers/scsi/hisi_sas/hisi_sas.h | 18 +-
drivers/scsi/hisi_sas/hisi_sas_main.c | 198 +-
drivers/scsi/hisi_sas/hisi_sas_v2_hw.c | 605 +--
drivers/scsi/hisi_sas/hisi_sas_v3_hw.c | 237 +-
drivers/scsi/hpsa.c | 117 +-
drivers/scsi/hpsa.h | 81 +-
drivers/scsi/hptiop.c | 11 +-
drivers/scsi/ibmvscsi/ibmvfc.c | 8 +-
drivers/scsi/ibmvscsi/ibmvscsi.c | 2 +-
drivers/scsi/ibmvscsi_tgt/ibmvscsi_tgt.c | 2 +-
drivers/scsi/imm.c | 1 -
drivers/scsi/ipr.c | 34 +-
drivers/scsi/ipr.h | 2 +
drivers/scsi/isci/init.c | 2 +-
drivers/scsi/iscsi_tcp.c | 2 -
drivers/scsi/libfc/fc_fcp.c | 2 -
drivers/scsi/libiscsi.c | 2 +-
drivers/scsi/libsas/Kconfig | 1 +
drivers/scsi/libsas/sas_ata.c | 1 +
drivers/scsi/libsas/sas_expander.c | 70 +-
drivers/scsi/libsas/sas_host_smp.c | 106 +-
drivers/scsi/libsas/sas_internal.h | 12 +-
drivers/scsi/libsas/sas_scsi_host.c | 15 +-
drivers/scsi/lpfc/lpfc.h | 19 +-
drivers/scsi/lpfc/lpfc_attr.c | 52 +-
drivers/scsi/lpfc/lpfc_attr.h | 10 +
drivers/scsi/lpfc/lpfc_bsg.c | 9 +-
drivers/scsi/lpfc/lpfc_crtn.h | 5 +-
drivers/scsi/lpfc/lpfc_ct.c | 4 +-
drivers/scsi/lpfc/lpfc_debugfs.c | 11 +-
drivers/scsi/lpfc/lpfc_debugfs.h | 6 +-
drivers/scsi/lpfc/lpfc_disc.h | 1 +
drivers/scsi/lpfc/lpfc_els.c | 93 +-
drivers/scsi/lpfc/lpfc_hbadisc.c | 12 +-
drivers/scsi/lpfc/lpfc_hw.h | 18 +-
drivers/scsi/lpfc/lpfc_hw4.h | 23 +-
drivers/scsi/lpfc/lpfc_init.c | 73 +-
drivers/scsi/lpfc/lpfc_mbox.c | 35 +-
drivers/scsi/lpfc/lpfc_mem.c | 90 +-
drivers/scsi/lpfc/lpfc_nportdisc.c | 25 +-
drivers/scsi/lpfc/lpfc_nvme.c | 31 +-
drivers/scsi/lpfc/lpfc_nvmet.c | 279 +-
drivers/scsi/lpfc/lpfc_nvmet.h | 14 +
drivers/scsi/lpfc/lpfc_scsi.c | 12 +-
drivers/scsi/lpfc/lpfc_sli.c | 62 +-
drivers/scsi/lpfc/lpfc_sli4.h | 23 +-
drivers/scsi/lpfc/lpfc_version.h | 2 +-
drivers/scsi/mac53c94.c | 13 +-
drivers/scsi/mac_esp.c | 37 +-
drivers/scsi/mac_scsi.c | 4 +-
drivers/scsi/megaraid.c | 6 +-
drivers/scsi/megaraid/megaraid_mbox.c | 32 +-
drivers/scsi/megaraid/megaraid_mm.c | 29 +-
drivers/scsi/megaraid/megaraid_sas.h | 5 +-
drivers/scsi/megaraid/megaraid_sas_base.c | 112 +-
drivers/scsi/megaraid/megaraid_sas_fp.c | 40 +-
drivers/scsi/megaraid/megaraid_sas_fusion.c | 216 +-
drivers/scsi/mpt3sas/mpt3sas_base.c | 85 +-
drivers/scsi/mpt3sas/mpt3sas_base.h | 2 +-
drivers/scsi/mpt3sas/mpt3sas_transport.c | 230 +-
drivers/scsi/mvme147.c | 16 -
drivers/scsi/mvsas/mv_init.c | 12 +-
drivers/scsi/mvsas/mv_sas.c | 6 +-
drivers/scsi/nsp32.c | 22 +-
drivers/scsi/osst.c | 8 +-
drivers/scsi/pcmcia/fdomain_stub.c | 2 +-
drivers/scsi/pcmcia/qlogic_stub.c | 4 +-
drivers/scsi/pm8001/pm8001_init.c | 7 +-
drivers/scsi/pmcraid.c | 17 +-
drivers/scsi/pmcraid.h | 2 +-
drivers/scsi/ppa.c | 1 -
drivers/scsi/qedf/qedf.h | 5 +-
drivers/scsi/qedf/qedf_els.c | 14 +-
drivers/scsi/qedf/qedf_fip.c | 35 +-
drivers/scsi/qedf/qedf_main.c | 133 +-
drivers/scsi/qedf/qedf_version.h | 6 +-
drivers/scsi/qedi/qedi.h | 5 +-
drivers/scsi/qedi/qedi_iscsi.c | 2 +-
drivers/scsi/qedi/qedi_main.c | 12 +-
drivers/scsi/qla2xxx/qla_attr.c | 86 +-
drivers/scsi/qla2xxx/qla_dbg.c | 10 +-
drivers/scsi/qla2xxx/qla_def.h | 118 +-
drivers/scsi/qla2xxx/qla_fw.h | 28 +-
drivers/scsi/qla2xxx/qla_gbl.h | 22 +-
drivers/scsi/qla2xxx/qla_gs.c | 18 +-
drivers/scsi/qla2xxx/qla_init.c | 183 +-
drivers/scsi/qla2xxx/qla_iocb.c | 55 +-
drivers/scsi/qla2xxx/qla_isr.c | 78 +-
drivers/scsi/qla2xxx/qla_mbx.c | 263 +-
drivers/scsi/qla2xxx/qla_mid.c | 14 +-
drivers/scsi/qla2xxx/qla_mr.c | 7 +-
drivers/scsi/qla2xxx/qla_nvme.c | 161 +-
drivers/scsi/qla2xxx/qla_nvme.h | 17 +
drivers/scsi/qla2xxx/qla_os.c | 155 +-
drivers/scsi/qla2xxx/qla_target.c | 29 +-
drivers/scsi/qla2xxx/qla_target.h | 2 +
drivers/scsi/qla2xxx/qla_tmpl.c | 31 +-
drivers/scsi/qla2xxx/qla_version.h | 2 +-
drivers/scsi/qlogicfas.c | 2 +-
drivers/scsi/qlogicfas408.c | 6 +-
drivers/scsi/qlogicfas408.h | 2 +-
drivers/scsi/qlogicpti.c | 2 +-
drivers/scsi/scsi.c | 144 +-
drivers/scsi/scsi_debug.c | 3 +-
drivers/scsi/scsi_debugfs.c | 4 +-
drivers/scsi/scsi_error.c | 10 +-
drivers/scsi/scsi_ioctl.c | 4 +-
drivers/scsi/scsi_lib.c | 131 +-
drivers/scsi/scsi_priv.h | 2 +-
drivers/scsi/scsi_scan.c | 2 +-
drivers/scsi/scsi_sysfs.c | 33 +-
drivers/scsi/scsi_transport_fc.c | 37 +-
drivers/scsi/scsi_transport_iscsi.c | 6 +-
drivers/scsi/scsi_transport_sas.c | 121 +-
drivers/scsi/scsi_transport_srp.c | 7 +-
drivers/scsi/sd.c | 10 +-
drivers/scsi/sd_zbc.c | 9 +-
drivers/scsi/ses.c | 64 +-
drivers/scsi/sg.c | 55 +-
drivers/scsi/sgiwd93.c | 15 -
drivers/scsi/smartpqi/smartpqi.h | 44 +-
drivers/scsi/smartpqi/smartpqi_init.c | 145 +-
drivers/scsi/smartpqi/smartpqi_sas_transport.c | 9 -
drivers/scsi/smartpqi/smartpqi_sis.c | 111 +-
drivers/scsi/smartpqi/smartpqi_sis.h | 4 +-
drivers/scsi/sr.c | 2 +-
drivers/scsi/st.c | 4 +-
drivers/scsi/storvsc_drv.c | 2 +
drivers/scsi/sun3_scsi.c | 4 +-
drivers/scsi/sym53c8xx_2/sym_hipd.c | 2 +-
drivers/scsi/ufs/ufshcd.c | 2 +-
drivers/scsi/virtio_scsi.c | 4 +-
drivers/scsi/wd33c93.c | 2 +
drivers/staging/rts5208/rtsx.c | 11 -
drivers/staging/unisys/visorhba/visorhba_main.c | 123 +-
drivers/usb/storage/uas.c | 4 +-
drivers/virtio/virtio_ring.c | 5 +-
include/linux/bsg-lib.h | 5 +-
include/linux/cpuhotplug.h | 2 -
include/linux/rcupdate.h | 16 +
include/scsi/libsas.h | 5 +-
include/scsi/scsi_cmnd.h | 5 +-
include/scsi/scsi_device.h | 20 +-
include/scsi/scsi_tcq.h | 2 +-
include/scsi/scsi_transport_fc.h | 1 +
include/scsi/scsi_transport_sas.h | 4 +-
include/scsi/scsi_transport_srp.h | 2 +-
230 files changed, 5059 insertions(+), 12558 deletions(-)
delete mode 100644 Documentation/blockdev/cciss.txt
delete mode 100644 drivers/block/cciss.c
delete mode 100644 drivers/block/cciss.h
delete mode 100644 drivers/block/cciss_cmd.h
delete mode 100644 drivers/block/cciss_scsi.c
delete mode 100644 drivers/block/cciss_scsi.h
James
^ permalink raw reply [flat|nested] only message in thread
only message in thread, other threads:[~2017-09-07 21:58 UTC | newest]
Thread overview: (only message) (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2017-09-07 21:58 [GIT PULL] first round of SCSI updates for the 4.13+ merge window James Bottomley
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).