linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Daniel Lezcano <daniel.lezcano@linaro.org>
To: edubezval@gmail.com, ldewangan@nvidia.com
Cc: linux-pm@vger.kernel.org, daniel.lezcano@linaro.org,
	Zhang Rui <rui.zhang@intel.com>,
	linux-kernel@vger.kernel.org (open list)
Subject: [PATCH V2] thermal/drivers/generic-iio-adc: Switch tz request to devm version
Date: Fri,  8 Sep 2017 09:01:56 +0200	[thread overview]
Message-ID: <1504854117-18392-1-git-send-email-daniel.lezcano@linaro.org> (raw)
In-Reply-To: <20170908025606.GA2755@localhost.localdomain>

Everything mentionned here:
 https://lkml.org/lkml/2016/4/20/850

This driver was added before the devm_iio_channel_get() function version was
merged. The sensor should be released before the iio channel, thus we had to
use the non-devm version of thermal_zone_of_sensor_register().

Now the devm_iio_channel_get() is available, do the corresponding change in
this driver and remove gadc_thermal_remove().

[Compiled tested only]

Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
---
 drivers/thermal/thermal-generic-adc.c | 24 ++++--------------------
 1 file changed, 4 insertions(+), 20 deletions(-)

diff --git a/drivers/thermal/thermal-generic-adc.c b/drivers/thermal/thermal-generic-adc.c
index 73f55d6..46d3005 100644
--- a/drivers/thermal/thermal-generic-adc.c
+++ b/drivers/thermal/thermal-generic-adc.c
@@ -126,38 +126,23 @@ static int gadc_thermal_probe(struct platform_device *pdev)
 	gti->dev = &pdev->dev;
 	platform_set_drvdata(pdev, gti);
 
-	gti->channel = iio_channel_get(&pdev->dev, "sensor-channel");
+	gti->channel = devm_iio_channel_get(&pdev->dev, "sensor-channel");
 	if (IS_ERR(gti->channel)) {
 		ret = PTR_ERR(gti->channel);
 		dev_err(&pdev->dev, "IIO channel not found: %d\n", ret);
 		return ret;
 	}
 
-	gti->tz_dev = thermal_zone_of_sensor_register(&pdev->dev, 0,
-						      gti, &gadc_thermal_ops);
+	gti->tz_dev = devm_thermal_zone_of_sensor_register(&pdev->dev, 0, gti,
+							   &gadc_thermal_ops);
 	if (IS_ERR(gti->tz_dev)) {
 		ret = PTR_ERR(gti->tz_dev);
 		dev_err(&pdev->dev, "Thermal zone sensor register failed: %d\n",
 			ret);
-		goto sensor_fail;
+		return ret;
 	}
 
 	return 0;
-
-sensor_fail:
-	iio_channel_release(gti->channel);
-
-	return ret;
-}
-
-static int gadc_thermal_remove(struct platform_device *pdev)
-{
-	struct gadc_thermal_info *gti = platform_get_drvdata(pdev);
-
-	thermal_zone_of_sensor_unregister(&pdev->dev, gti->tz_dev);
-	iio_channel_release(gti->channel);
-
-	return 0;
 }
 
 static const struct of_device_id of_adc_thermal_match[] = {
@@ -172,7 +157,6 @@ static struct platform_driver gadc_thermal_driver = {
 		.of_match_table = of_adc_thermal_match,
 	},
 	.probe = gadc_thermal_probe,
-	.remove = gadc_thermal_remove,
 };
 
 module_platform_driver(gadc_thermal_driver);
-- 
2.7.4

  reply	other threads:[~2017-09-08  7:03 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-09-07 18:17 [PATCH] thermal/drivers/generic-iio-adc: Switch tz request to devm version Daniel Lezcano
2017-09-08  2:56 ` Eduardo Valentin
2017-09-08  7:01   ` Daniel Lezcano [this message]
2017-09-08  7:13     ` [PATCH V2] " Laxman Dewangan
2017-09-08  7:02   ` [PATCH] " Daniel Lezcano

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1504854117-18392-1-git-send-email-daniel.lezcano@linaro.org \
    --to=daniel.lezcano@linaro.org \
    --cc=edubezval@gmail.com \
    --cc=ldewangan@nvidia.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pm@vger.kernel.org \
    --cc=rui.zhang@intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).