* [PATCH 12/13] scsi: arcmsr: adjust some tab or white-space to make text alignment
@ 2017-11-09 0:30 Ching Huang
0 siblings, 0 replies; only message in thread
From: Ching Huang @ 2017-11-09 0:30 UTC (permalink / raw)
To: martin.petersen, James.Bottomley, linux-scsi, linux-kernel,
jthumshirn, hare, dan.carpenter, hch
From: Ching Huang <ching2048@areca.com.tw>
adjust some tab or white-space to make text alignment
Signed-off-by: Ching Huang <ching2048@areca.com.tw>
---
diff -uprN a/drivers/scsi/arcmsr/arcmsr.h b/drivers/scsi/arcmsr/arcmsr.h
--- a/drivers/scsi/arcmsr/arcmsr.h 2017-11-07 16:18:22.000000000 +0800
+++ b/drivers/scsi/arcmsr/arcmsr.h 2017-11-07 17:29:10.000000000 +0800
@@ -55,35 +55,35 @@ struct device_attribute;
#define ARCMSR_DEFAULT_OUTSTANDING_CMD 128
#define ARCMSR_MIN_OUTSTANDING_CMD 32
#define ARCMSR_DRIVER_VERSION "v1.30.00.22-20151126"
-#define ARCMSR_SCSI_INITIATOR_ID 255
-#define ARCMSR_MAX_XFER_SECTORS 512
-#define ARCMSR_MAX_XFER_SECTORS_B 4096
-#define ARCMSR_MAX_XFER_SECTORS_C 304
-#define ARCMSR_MAX_TARGETID 17
-#define ARCMSR_MAX_TARGETLUN 8
+#define ARCMSR_SCSI_INITIATOR_ID 255
+#define ARCMSR_MAX_XFER_SECTORS 512
+#define ARCMSR_MAX_XFER_SECTORS_B 4096
+#define ARCMSR_MAX_XFER_SECTORS_C 304
+#define ARCMSR_MAX_TARGETID 17
+#define ARCMSR_MAX_TARGETLUN 8
#define ARCMSR_MAX_CMD_PERLUN 128
#define ARCMSR_DEFAULT_CMD_PERLUN 32
#define ARCMSR_MIN_CMD_PERLUN 1
-#define ARCMSR_MAX_QBUFFER 4096
-#define ARCMSR_DEFAULT_SG_ENTRIES 38
-#define ARCMSR_MAX_HBB_POSTQUEUE 264
+#define ARCMSR_MAX_QBUFFER 4096
+#define ARCMSR_DEFAULT_SG_ENTRIES 38
+#define ARCMSR_MAX_HBB_POSTQUEUE 264
#define ARCMSR_MAX_ARC1214_POSTQUEUE 256
#define ARCMSR_MAX_ARC1214_DONEQUEUE 257
#define ARCMSR_MAX_HBE_DONEQUEUE 512
-#define ARCMSR_MAX_XFER_LEN 0x26000 /* 152K */
-#define ARCMSR_CDB_SG_PAGE_LENGTH 256
+#define ARCMSR_MAX_XFER_LEN 0x26000 /* 152K */
+#define ARCMSR_CDB_SG_PAGE_LENGTH 256
#define ARCMST_NUM_MSIX_VECTORS 4
#ifndef PCI_DEVICE_ID_ARECA_1880
-#define PCI_DEVICE_ID_ARECA_1880 0x1880
- #endif
+#define PCI_DEVICE_ID_ARECA_1880 0x1880
+#endif
#ifndef PCI_DEVICE_ID_ARECA_1214
- #define PCI_DEVICE_ID_ARECA_1214 0x1214
+#define PCI_DEVICE_ID_ARECA_1214 0x1214
#endif
#ifndef PCI_DEVICE_ID_ARECA_1203
- #define PCI_DEVICE_ID_ARECA_1203 0x1203
+#define PCI_DEVICE_ID_ARECA_1203 0x1203
#endif
#ifndef PCI_DEVICE_ID_ARECA_1884
- #define PCI_DEVICE_ID_ARECA_1884 0x1884
+#define PCI_DEVICE_ID_ARECA_1884 0x1884
#endif
#define ARCMSR_HOURS (1000 * 60 * 60 * 4)
#define ARCMSR_MINUTES (1000 * 60 * 60)
@@ -92,15 +92,15 @@ struct device_attribute;
**
**********************************************************************************
*/
-#define ARC_SUCCESS 0
-#define ARC_FAILURE 1
+#define ARC_SUCCESS 0
+#define ARC_FAILURE 1
/*
*******************************************************************************
** split 64bits dma addressing
*******************************************************************************
*/
-#define dma_addr_hi32(addr) (uint32_t) ((addr>>16)>>16)
-#define dma_addr_lo32(addr) (uint32_t) (addr & 0xffffffff)
+#define dma_addr_hi32(addr) (uint32_t) ((addr>>16)>>16)
+#define dma_addr_lo32(addr) (uint32_t) (addr & 0xffffffff)
/*
*******************************************************************************
** MESSAGE CONTROL CODE
@@ -140,7 +140,7 @@ struct CMD_MESSAGE_FIELD
#define FUNCTION_SAY_HELLO 0x0807
#define FUNCTION_SAY_GOODBYE 0x0808
#define FUNCTION_FLUSH_ADAPTER_CACHE 0x0809
-#define FUNCTION_GET_FIRMWARE_STATUS 0x080A
+#define FUNCTION_GET_FIRMWARE_STATUS 0x080A
#define FUNCTION_HARDWARE_RESET 0x080B
/* ARECA IO CONTROL CODE*/
#define ARCMSR_MESSAGE_READ_RQBUFFER \
@@ -171,18 +171,18 @@ struct CMD_MESSAGE_FIELD
** structure for holding DMA address data
*************************************************************
*/
-#define IS_DMA64 (sizeof(dma_addr_t) == 8)
-#define IS_SG64_ADDR 0x01000000 /* bit24 */
+#define IS_DMA64 (sizeof(dma_addr_t) == 8)
+#define IS_SG64_ADDR 0x01000000 /* bit24 */
struct SG32ENTRY
{
- __le32 length;
- __le32 address;
+ __le32 length;
+ __le32 address;
}__attribute__ ((packed));
struct SG64ENTRY
{
- __le32 length;
- __le32 address;
- __le32 addresshigh;
+ __le32 length;
+ __le32 address;
+ __le32 addresshigh;
}__attribute__ ((packed));
/*
********************************************************************
@@ -201,50 +201,50 @@ struct QBUFFER
*/
struct FIRMWARE_INFO
{
- uint32_t signature; /*0, 00-03*/
- uint32_t request_len; /*1, 04-07*/
- uint32_t numbers_queue; /*2, 08-11*/
- uint32_t sdram_size; /*3, 12-15*/
- uint32_t ide_channels; /*4, 16-19*/
- char vendor[40]; /*5, 20-59*/
- char model[8]; /*15, 60-67*/
- char firmware_ver[16]; /*17, 68-83*/
- char device_map[16]; /*21, 84-99*/
- uint32_t cfgVersion; /*25,100-103 Added for checking of new firmware capability*/
- uint8_t cfgSerial[16]; /*26,104-119*/
- uint32_t cfgPicStatus; /*30,120-123*/
+ uint32_t signature; /*0, 00-03*/
+ uint32_t request_len; /*1, 04-07*/
+ uint32_t numbers_queue; /*2, 08-11*/
+ uint32_t sdram_size; /*3, 12-15*/
+ uint32_t ide_channels; /*4, 16-19*/
+ char vendor[40]; /*5, 20-59*/
+ char model[8]; /*15, 60-67*/
+ char firmware_ver[16]; /*17, 68-83*/
+ char device_map[16]; /*21, 84-99*/
+ uint32_t cfgVersion; /*25,100-103 Added for checking of new firmware capability*/
+ uint8_t cfgSerial[16]; /*26,104-119*/
+ uint32_t cfgPicStatus; /*30,120-123*/
};
/* signature of set and get firmware config */
-#define ARCMSR_SIGNATURE_GET_CONFIG 0x87974060
-#define ARCMSR_SIGNATURE_SET_CONFIG 0x87974063
+#define ARCMSR_SIGNATURE_GET_CONFIG 0x87974060
+#define ARCMSR_SIGNATURE_SET_CONFIG 0x87974063
/* message code of inbound message register */
-#define ARCMSR_INBOUND_MESG0_NOP 0x00000000
-#define ARCMSR_INBOUND_MESG0_GET_CONFIG 0x00000001
-#define ARCMSR_INBOUND_MESG0_SET_CONFIG 0x00000002
-#define ARCMSR_INBOUND_MESG0_ABORT_CMD 0x00000003
-#define ARCMSR_INBOUND_MESG0_STOP_BGRB 0x00000004
-#define ARCMSR_INBOUND_MESG0_FLUSH_CACHE 0x00000005
-#define ARCMSR_INBOUND_MESG0_START_BGRB 0x00000006
-#define ARCMSR_INBOUND_MESG0_CHK331PENDING 0x00000007
-#define ARCMSR_INBOUND_MESG0_SYNC_TIMER 0x00000008
+#define ARCMSR_INBOUND_MESG0_NOP 0x00000000
+#define ARCMSR_INBOUND_MESG0_GET_CONFIG 0x00000001
+#define ARCMSR_INBOUND_MESG0_SET_CONFIG 0x00000002
+#define ARCMSR_INBOUND_MESG0_ABORT_CMD 0x00000003
+#define ARCMSR_INBOUND_MESG0_STOP_BGRB 0x00000004
+#define ARCMSR_INBOUND_MESG0_FLUSH_CACHE 0x00000005
+#define ARCMSR_INBOUND_MESG0_START_BGRB 0x00000006
+#define ARCMSR_INBOUND_MESG0_CHK331PENDING 0x00000007
+#define ARCMSR_INBOUND_MESG0_SYNC_TIMER 0x00000008
/* doorbell interrupt generator */
-#define ARCMSR_INBOUND_DRIVER_DATA_WRITE_OK 0x00000001
-#define ARCMSR_INBOUND_DRIVER_DATA_READ_OK 0x00000002
-#define ARCMSR_OUTBOUND_IOP331_DATA_WRITE_OK 0x00000001
-#define ARCMSR_OUTBOUND_IOP331_DATA_READ_OK 0x00000002
+#define ARCMSR_INBOUND_DRIVER_DATA_WRITE_OK 0x00000001
+#define ARCMSR_INBOUND_DRIVER_DATA_READ_OK 0x00000002
+#define ARCMSR_OUTBOUND_IOP331_DATA_WRITE_OK 0x00000001
+#define ARCMSR_OUTBOUND_IOP331_DATA_READ_OK 0x00000002
/* ccb areca cdb flag */
-#define ARCMSR_CCBPOST_FLAG_SGL_BSIZE 0x80000000
-#define ARCMSR_CCBPOST_FLAG_IAM_BIOS 0x40000000
-#define ARCMSR_CCBREPLY_FLAG_IAM_BIOS 0x40000000
-#define ARCMSR_CCBREPLY_FLAG_ERROR_MODE0 0x10000000
-#define ARCMSR_CCBREPLY_FLAG_ERROR_MODE1 0x00000001
+#define ARCMSR_CCBPOST_FLAG_SGL_BSIZE 0x80000000
+#define ARCMSR_CCBPOST_FLAG_IAM_BIOS 0x40000000
+#define ARCMSR_CCBREPLY_FLAG_IAM_BIOS 0x40000000
+#define ARCMSR_CCBREPLY_FLAG_ERROR_MODE0 0x10000000
+#define ARCMSR_CCBREPLY_FLAG_ERROR_MODE1 0x00000001
/* outbound firmware ok */
-#define ARCMSR_OUTBOUND_MESG1_FIRMWARE_OK 0x80000000
+#define ARCMSR_OUTBOUND_MESG1_FIRMWARE_OK 0x80000000
/* ARC-1680 Bus Reset*/
-#define ARCMSR_ARC1680_BUS_RESET 0x00000003
+#define ARCMSR_ARC1680_BUS_RESET 0x00000003
/* ARC-1880 Bus Reset*/
-#define ARCMSR_ARC1880_RESET_ADAPTER 0x00000024
-#define ARCMSR_ARC1880_DiagWrite_ENABLE 0x00000080
+#define ARCMSR_ARC1880_RESET_ADAPTER 0x00000024
+#define ARCMSR_ARC1880_DiagWrite_ENABLE 0x00000080
/*
************************************************************************
@@ -287,10 +287,10 @@ struct FIRMWARE_INFO
#define ARCMSR_MESSAGE_FLUSH_CACHE 0x00050008
/* (ARCMSR_INBOUND_MESG0_START_BGRB<<16)|ARCMSR_DRV2IOP_MESSAGE_CMD_POSTED) */
#define ARCMSR_MESSAGE_START_BGRB 0x00060008
-#define ARCMSR_MESSAGE_SYNC_TIMER 0x00080008
+#define ARCMSR_MESSAGE_SYNC_TIMER 0x00080008
#define ARCMSR_MESSAGE_START_DRIVER_MODE 0x000E0008
#define ARCMSR_MESSAGE_SET_POST_WINDOW 0x000F0008
-#define ARCMSR_MESSAGE_ACTIVE_EOI_MODE 0x00100008
+#define ARCMSR_MESSAGE_ACTIVE_EOI_MODE 0x00100008
/* ARCMSR_OUTBOUND_MESG1_FIRMWARE_OK */
#define ARCMSR_MESSAGE_FIRMWARE_OK 0x80000000
/* ioctl transfer */
@@ -299,7 +299,7 @@ struct FIRMWARE_INFO
#define ARCMSR_DRV2IOP_DATA_READ_OK 0x00000002
#define ARCMSR_DRV2IOP_CDB_POSTED 0x00000004
#define ARCMSR_DRV2IOP_MESSAGE_CMD_POSTED 0x00000008
-#define ARCMSR_DRV2IOP_END_OF_INTERRUPT 0x00000010
+#define ARCMSR_DRV2IOP_END_OF_INTERRUPT 0x00000010
/* data tunnel buffer between user space program and its firmware */
/* user space data to iop 128bytes */
@@ -324,12 +324,12 @@ struct FIRMWARE_INFO
#define ARCMSR_HBCMU_OUTBOUND_POSTQUEUE_ISR_MASK 0x00000008 /* When clear, the Outbound Post List FIFO Not Empty interrupt routes to the host.*/
#define ARCMSR_HBCMU_ALL_INTMASKENABLE 0x0000000D /* disable all ISR */
/* Host Interrupt Status */
-#define ARCMSR_HBCMU_UTILITY_A_ISR 0x00000001
+#define ARCMSR_HBCMU_UTILITY_A_ISR 0x00000001
/*
** Set when the Utility_A Interrupt bit is set in the Outbound Doorbell Register.
** It clears by writing a 1 to the Utility_A bit in the Outbound Doorbell Clear Register or through automatic clearing (if enabled).
*/
-#define ARCMSR_HBCMU_OUTBOUND_DOORBELL_ISR 0x00000004
+#define ARCMSR_HBCMU_OUTBOUND_DOORBELL_ISR 0x00000004
/*
** Set if Outbound Doorbell register bits 30:1 have a non-zero
** value. This bit clears only when Outbound Doorbell bits
@@ -342,7 +342,7 @@ struct FIRMWARE_INFO
** Register (FIFO) is not empty. It clears when the Outbound
** Post List FIFO is empty.
*/
-#define ARCMSR_HBCMU_SAS_ALL_INT 0x00000010
+#define ARCMSR_HBCMU_SAS_ALL_INT 0x00000010
/*
** This bit indicates a SAS interrupt from a source external to
** the PCIe core. This bit is not maskable.
@@ -351,17 +351,17 @@ struct FIRMWARE_INFO
#define ARCMSR_HBCMU_DRV2IOP_DATA_WRITE_OK 0x00000002
#define ARCMSR_HBCMU_DRV2IOP_DATA_READ_OK 0x00000004
/*inbound message 0 ready*/
-#define ARCMSR_HBCMU_DRV2IOP_MESSAGE_CMD_DONE 0x00000008
+#define ARCMSR_HBCMU_DRV2IOP_MESSAGE_CMD_DONE 0x00000008
/*more than 12 request completed in a time*/
#define ARCMSR_HBCMU_DRV2IOP_POSTQUEUE_THROTTLING 0x00000010
#define ARCMSR_HBCMU_IOP2DRV_DATA_WRITE_OK 0x00000002
/*outbound DATA WRITE isr door bell clear*/
-#define ARCMSR_HBCMU_IOP2DRV_DATA_WRITE_DOORBELL_CLEAR 0x00000002
+#define ARCMSR_HBCMU_IOP2DRV_DATA_WRITE_DOORBELL_CLEAR 0x00000002
#define ARCMSR_HBCMU_IOP2DRV_DATA_READ_OK 0x00000004
/*outbound DATA READ isr door bell clear*/
-#define ARCMSR_HBCMU_IOP2DRV_DATA_READ_DOORBELL_CLEAR 0x00000004
+#define ARCMSR_HBCMU_IOP2DRV_DATA_READ_DOORBELL_CLEAR 0x00000004
/*outbound message 0 ready*/
-#define ARCMSR_HBCMU_IOP2DRV_MESSAGE_CMD_DONE 0x00000008
+#define ARCMSR_HBCMU_IOP2DRV_MESSAGE_CMD_DONE 0x00000008
/*outbound message cmd isr door bell clear*/
#define ARCMSR_HBCMU_IOP2DRV_MESSAGE_CMD_DONE_DOORBELL_CLEAR 0x00000008
/*ARCMSR_HBAMU_MESSAGE_FIRMWARE_OK*/
@@ -448,13 +448,13 @@ struct FIRMWARE_INFO
*/
struct ARCMSR_CDB
{
- uint8_t Bus;
- uint8_t TargetID;
- uint8_t LUN;
- uint8_t Function;
- uint8_t CdbLength;
- uint8_t sgcount;
- uint8_t Flags;
+ uint8_t Bus;
+ uint8_t TargetID;
+ uint8_t LUN;
+ uint8_t Function;
+ uint8_t CdbLength;
+ uint8_t sgcount;
+ uint8_t Flags;
#define ARCMSR_CDB_FLAG_SGL_BSIZE 0x01
#define ARCMSR_CDB_FLAG_BIOS 0x02
#define ARCMSR_CDB_FLAG_WRITE 0x04
@@ -462,21 +462,21 @@ struct ARCMSR_CDB
#define ARCMSR_CDB_FLAG_HEADQ 0x08
#define ARCMSR_CDB_FLAG_ORDEREDQ 0x10
- uint8_t msgPages;
- uint32_t msgContext;
- uint32_t DataLength;
- uint8_t Cdb[16];
- uint8_t DeviceStatus;
+ uint8_t msgPages;
+ uint32_t msgContext;
+ uint32_t DataLength;
+ uint8_t Cdb[16];
+ uint8_t DeviceStatus;
#define ARCMSR_DEV_CHECK_CONDITION 0x02
#define ARCMSR_DEV_SELECT_TIMEOUT 0xF0
#define ARCMSR_DEV_ABORTED 0xF1
#define ARCMSR_DEV_INIT_FAIL 0xF2
- uint8_t SenseData[15];
+ uint8_t SenseData[15];
union
{
- struct SG32ENTRY sg32entry[1];
- struct SG64ENTRY sg64entry[1];
+ struct SG32ENTRY sg32entry[1];
+ struct SG64ENTRY sg64entry[1];
} u;
};
/*
@@ -516,13 +516,13 @@ struct MessageUnit_B
uint32_t done_qbuffer[ARCMSR_MAX_HBB_POSTQUEUE];
uint32_t postq_index;
uint32_t doneq_index;
- uint32_t __iomem *drv2iop_doorbell;
- uint32_t __iomem *drv2iop_doorbell_mask;
- uint32_t __iomem *iop2drv_doorbell;
- uint32_t __iomem *iop2drv_doorbell_mask;
- uint32_t __iomem *message_rwbuffer;
- uint32_t __iomem *message_wbuffer;
- uint32_t __iomem *message_rbuffer;
+ uint32_t __iomem *drv2iop_doorbell;
+ uint32_t __iomem *drv2iop_doorbell_mask;
+ uint32_t __iomem *iop2drv_doorbell;
+ uint32_t __iomem *iop2drv_doorbell_mask;
+ uint32_t __iomem *message_rwbuffer;
+ uint32_t __iomem *message_wbuffer;
+ uint32_t __iomem *message_rbuffer;
};
/*
*********************************************************************
@@ -542,7 +542,7 @@ struct MessageUnit_C{
uint32_t diagnostic_rw_data; /*0024 0027*/
uint32_t diagnostic_rw_address_low; /*0028 002B*/
uint32_t diagnostic_rw_address_high; /*002C 002F*/
- uint32_t host_int_status; /*0030 0033*/
+ uint32_t host_int_status; /*0030 0033*/
uint32_t host_int_mask; /*0034 0037*/
uint32_t dcr_data; /*0038 003B*/
uint32_t dcr_address; /*003C 003F*/
@@ -554,12 +554,12 @@ struct MessageUnit_C{
uint32_t iop_int_mask; /*0054 0057*/
uint32_t iop_inbound_queue_port; /*0058 005B*/
uint32_t iop_outbound_queue_port; /*005C 005F*/
- uint32_t inbound_free_list_index; /*0060 0063*/
- uint32_t inbound_post_list_index; /*0064 0067*/
- uint32_t outbound_free_list_index; /*0068 006B*/
- uint32_t outbound_post_list_index; /*006C 006F*/
+ uint32_t inbound_free_list_index; /*0060 0063*/
+ uint32_t inbound_post_list_index; /*0064 0067*/
+ uint32_t outbound_free_list_index; /*0068 006B*/
+ uint32_t outbound_post_list_index; /*006C 006F*/
uint32_t inbound_doorbell_clear; /*0070 0073*/
- uint32_t i2o_message_unit_control; /*0074 0077*/
+ uint32_t i2o_message_unit_control; /*0074 0077*/
uint32_t last_used_message_source_address_low; /*0078 007B*/
uint32_t last_used_message_source_address_high; /*007C 007F*/
uint32_t pull_mode_data_byte_count[4]; /*0080 008F*/
@@ -567,7 +567,7 @@ struct MessageUnit_C{
uint32_t done_queue_not_empty_int_counter_timer; /*0094 0097*/
uint32_t utility_A_int_counter_timer; /*0098 009B*/
uint32_t outbound_doorbell; /*009C 009F*/
- uint32_t outbound_doorbell_clear; /*00A0 00A3*/
+ uint32_t outbound_doorbell_clear; /*00A0 00A3*/
uint32_t message_source_address_index; /*00A4 00A7*/
uint32_t message_done_queue_index; /*00A8 00AB*/
uint32_t reserved0; /*00AC 00AF*/
@@ -589,10 +589,10 @@ struct MessageUnit_C{
uint32_t last_used_message_dest_address_high; /*00EC 00EF*/
uint32_t message_done_queue_base_address_low; /*00F0 00F3*/
uint32_t message_done_queue_base_address_high; /*00F4 00F7*/
- uint32_t host_diagnostic; /*00F8 00FB*/
+ uint32_t host_diagnostic; /*00F8 00FB*/
uint32_t write_sequence; /*00FC 00FF*/
uint32_t reserved1[34]; /*0100 0187*/
- uint32_t reserved2[1950]; /*0188 1FFF*/
+ uint32_t reserved2[1950]; /*0188 1FFF*/
uint32_t message_wbuffer[32]; /*2000 207F*/
uint32_t reserved3[32]; /*2080 20FF*/
uint32_t message_rbuffer[32]; /*2100 217F*/
@@ -738,26 +738,26 @@ typedef struct deliver_completeQ {
*/
struct AdapterControlBlock
{
- uint32_t adapter_type; /* adapter A,B..... */
- #define ACB_ADAPTER_TYPE_A 0x00000000 /* hba I IOP */
- #define ACB_ADAPTER_TYPE_B 0x00000001 /* hbb M IOP */
- #define ACB_ADAPTER_TYPE_C 0x00000002 /* hbc L IOP */
- #define ACB_ADAPTER_TYPE_D 0x00000003 /* hbd M IOP */
- #define ACB_ADAPTER_TYPE_E 0x00000004 /* hba L IOP */
- u32 roundup_ccbsize;
- struct pci_dev * pdev;
- struct Scsi_Host * host;
- unsigned long vir2phy_offset;
+ uint32_t adapter_type; /* adapter A,B..... */
+#define ACB_ADAPTER_TYPE_A 0x00000000 /* hba I IOP */
+#define ACB_ADAPTER_TYPE_B 0x00000001 /* hbb M IOP */
+#define ACB_ADAPTER_TYPE_C 0x00000002 /* hbc L IOP */
+#define ACB_ADAPTER_TYPE_D 0x00000003 /* hbd M IOP */
+#define ACB_ADAPTER_TYPE_E 0x00000004 /* hba L IOP */
+ u32 roundup_ccbsize;
+ struct pci_dev * pdev;
+ struct Scsi_Host * host;
+ unsigned long vir2phy_offset;
/* Offset is used in making arc cdb physical to virtual calculations */
- uint32_t outbound_int_enable;
- uint32_t cdb_phyaddr_hi32;
- uint32_t reg_mu_acc_handle0;
- spinlock_t eh_lock;
- spinlock_t ccblist_lock;
- spinlock_t postq_lock;
- spinlock_t doneq_lock;
- spinlock_t rqbuffer_lock;
- spinlock_t wqbuffer_lock;
+ uint32_t outbound_int_enable;
+ uint32_t cdb_phyaddr_hi32;
+ uint32_t reg_mu_acc_handle0;
+ spinlock_t eh_lock;
+ spinlock_t ccblist_lock;
+ spinlock_t postq_lock;
+ spinlock_t doneq_lock;
+ spinlock_t rqbuffer_lock;
+ spinlock_t wqbuffer_lock;
union {
struct MessageUnit_A __iomem *pmuA;
struct MessageUnit_B *pmuB;
@@ -766,84 +766,84 @@ struct AdapterControlBlock
struct MessageUnit_E __iomem *pmuE;
};
/* message unit ATU inbound base address0 */
- void __iomem *mem_base0;
- void __iomem *mem_base1;
- uint32_t acb_flags;
+ void __iomem *mem_base0;
+ void __iomem *mem_base1;
+ uint32_t acb_flags;
u16 dev_id;
- uint8_t adapter_index;
- #define ACB_F_SCSISTOPADAPTER 0x0001
- #define ACB_F_MSG_STOP_BGRB 0x0002
- /* stop RAID background rebuild */
- #define ACB_F_MSG_START_BGRB 0x0004
- /* stop RAID background rebuild */
- #define ACB_F_IOPDATA_OVERFLOW 0x0008
- /* iop message data rqbuffer overflow */
- #define ACB_F_MESSAGE_WQBUFFER_CLEARED 0x0010
- /* message clear wqbuffer */
- #define ACB_F_MESSAGE_RQBUFFER_CLEARED 0x0020
- /* message clear rqbuffer */
- #define ACB_F_MESSAGE_WQBUFFER_READED 0x0040
- #define ACB_F_BUS_RESET 0x0080
- #define ACB_F_BUS_HANG_ON 0x0800/* need hardware reset bus */
-
- #define ACB_F_IOP_INITED 0x0100
- /* iop init */
- #define ACB_F_ABORT 0x0200
- #define ACB_F_FIRMWARE_TRAP 0x0400
- #define ACB_F_MSG_GET_CONFIG 0x1000
- struct CommandControlBlock * pccb_pool[ARCMSR_MAX_FREECCB_NUM];
+ uint8_t adapter_index;
+#define ACB_F_SCSISTOPADAPTER 0x0001
+#define ACB_F_MSG_STOP_BGRB 0x0002
+/* stop RAID background rebuild */
+#define ACB_F_MSG_START_BGRB 0x0004
+/* stop RAID background rebuild */
+#define ACB_F_IOPDATA_OVERFLOW 0x0008
+/* iop message data rqbuffer overflow */
+#define ACB_F_MESSAGE_WQBUFFER_CLEARED 0x0010
+/* message clear wqbuffer */
+#define ACB_F_MESSAGE_RQBUFFER_CLEARED 0x0020
+/* message clear rqbuffer */
+#define ACB_F_MESSAGE_WQBUFFER_READED 0x0040
+#define ACB_F_BUS_RESET 0x0080
+#define ACB_F_BUS_HANG_ON 0x0800/* need hardware reset bus */
+
+#define ACB_F_IOP_INITED 0x0100
+/* iop init */
+#define ACB_F_ABORT 0x0200
+#define ACB_F_FIRMWARE_TRAP 0x0400
+#define ACB_F_MSG_GET_CONFIG 0x1000
+ struct CommandControlBlock * pccb_pool[ARCMSR_MAX_FREECCB_NUM];
/* used for memory free */
- struct list_head ccb_free_list;
+ struct list_head ccb_free_list;
/* head of free ccb list */
- atomic_t ccboutstandingcount;
+ atomic_t ccboutstandingcount;
/*The present outstanding command number that in the IOP that
waiting for being handled by FW*/
- void * dma_coherent;
+ void * dma_coherent;
/* dma_coherent used for memory free */
- dma_addr_t dma_coherent_handle;
+ dma_addr_t dma_coherent_handle;
/* dma_coherent_handle used for memory free */
- dma_addr_t dma_coherent_handle2;
- void *dma_coherent2;
- unsigned int uncache_size;
- uint8_t rqbuffer[ARCMSR_MAX_QBUFFER];
+ dma_addr_t dma_coherent_handle2;
+ void *dma_coherent2;
+ unsigned int uncache_size;
+ uint8_t rqbuffer[ARCMSR_MAX_QBUFFER];
/* data collection buffer for read from 80331 */
- int32_t rqbuf_getIndex;
+ int32_t rqbuf_getIndex;
/* first of read buffer */
- int32_t rqbuf_putIndex;
+ int32_t rqbuf_putIndex;
/* last of read buffer */
- uint8_t wqbuffer[ARCMSR_MAX_QBUFFER];
+ uint8_t wqbuffer[ARCMSR_MAX_QBUFFER];
/* data collection buffer for write to 80331 */
- int32_t wqbuf_getIndex;
+ int32_t wqbuf_getIndex;
/* first of write buffer */
- int32_t wqbuf_putIndex;
+ int32_t wqbuf_putIndex;
/* last of write buffer */
- uint8_t devstate[ARCMSR_MAX_TARGETID][ARCMSR_MAX_TARGETLUN];
+ uint8_t devstate[ARCMSR_MAX_TARGETID][ARCMSR_MAX_TARGETLUN];
/* id0 ..... id15, lun0...lun7 */
-#define ARECA_RAID_GONE 0x55
-#define ARECA_RAID_GOOD 0xaa
- uint32_t num_resets;
- uint32_t num_aborts;
- uint32_t signature;
- uint32_t firm_request_len;
- uint32_t firm_numbers_queue;
- uint32_t firm_sdram_size;
- uint32_t firm_hd_channels;
- uint32_t firm_cfg_version;
+#define ARECA_RAID_GONE 0x55
+#define ARECA_RAID_GOOD 0xaa
+ uint32_t num_resets;
+ uint32_t num_aborts;
+ uint32_t signature;
+ uint32_t firm_request_len;
+ uint32_t firm_numbers_queue;
+ uint32_t firm_sdram_size;
+ uint32_t firm_hd_channels;
+ uint32_t firm_cfg_version;
char firm_model[12];
char firm_version[20];
char device_map[20]; /*21,84-99*/
- struct work_struct arcmsr_do_message_isr_bh;
- struct timer_list eternal_timer;
+ struct work_struct arcmsr_do_message_isr_bh;
+ struct timer_list eternal_timer;
unsigned short fw_flag;
- #define FW_NORMAL 0x0000
- #define FW_BOG 0x0001
- #define FW_DEADLOCK 0x0010
- atomic_t rq_map_token;
- atomic_t ante_token_value;
- uint32_t maxOutstanding;
- int vector_count;
+#define FW_NORMAL 0x0000
+#define FW_BOG 0x0001
+#define FW_DEADLOCK 0x0010
+ atomic_t rq_map_token;
+ atomic_t ante_token_value;
+ uint32_t maxOutstanding;
+ int vector_count;
uint32_t maxFreeCCB;
struct timer_list refresh_timer;
uint32_t doneq_index;
@@ -861,30 +861,30 @@ struct AdapterControlBlock
*/
struct CommandControlBlock{
/*x32:sizeof struct_CCB=(32+60)byte, x64:sizeof struct_CCB=(64+60)byte*/
- struct list_head list; /*x32: 8byte, x64: 16byte*/
- struct scsi_cmnd *pcmd; /*8 bytes pointer of linux scsi command */
- struct AdapterControlBlock *acb; /*x32: 4byte, x64: 8byte*/
- uint32_t cdb_phyaddr; /*x32: 4byte, x64: 4byte*/
- uint32_t arc_cdb_size; /*x32:4byte,x64:4byte*/
- uint16_t ccb_flags; /*x32: 2byte, x64: 2byte*/
- #define CCB_FLAG_READ 0x0000
- #define CCB_FLAG_WRITE 0x0001
- #define CCB_FLAG_ERROR 0x0002
- #define CCB_FLAG_FLUSHCACHE 0x0004
- #define CCB_FLAG_MASTER_ABORTED 0x0008
- uint16_t startdone; /*x32:2byte,x32:2byte*/
- #define ARCMSR_CCB_DONE 0x0000
- #define ARCMSR_CCB_START 0x55AA
- #define ARCMSR_CCB_ABORTED 0xAA55
- #define ARCMSR_CCB_ILLEGAL 0xFFFF
+ struct list_head list; /*x32: 8byte, x64: 16byte*/
+ struct scsi_cmnd *pcmd; /*8 bytes pointer of linux scsi command */
+ struct AdapterControlBlock *acb; /*x32: 4byte, x64: 8byte*/
+ uint32_t cdb_phyaddr; /*x32: 4byte, x64: 4byte*/
+ uint32_t arc_cdb_size; /*x32:4byte,x64:4byte*/
+ uint16_t ccb_flags; /*x32: 2byte, x64: 2byte*/
+#define CCB_FLAG_READ 0x0000
+#define CCB_FLAG_WRITE 0x0001
+#define CCB_FLAG_ERROR 0x0002
+#define CCB_FLAG_FLUSHCACHE 0x0004
+#define CCB_FLAG_MASTER_ABORTED 0x0008
+ uint16_t startdone; /*x32:2byte,x32:2byte*/
+#define ARCMSR_CCB_DONE 0x0000
+#define ARCMSR_CCB_START 0x55AA
+#define ARCMSR_CCB_ABORTED 0xAA55
+#define ARCMSR_CCB_ILLEGAL 0xFFFF
uint32_t smid;
- #if BITS_PER_LONG == 64
+#if BITS_PER_LONG == 64
/* ======================512+64 bytes======================== */
- uint32_t reserved[4]; /*16 byte*/
- #else
+ uint32_t reserved[4]; /*16 byte*/
+#else
/* ======================512+32 bytes======================== */
- // uint32_t reserved; /*4 byte*/
- #endif
+ // uint32_t reserved; /*4 byte*/
+#endif
/* ======================================================= */
struct ARCMSR_CDB arcmsr_cdb;
};
@@ -918,13 +918,13 @@ struct SENSE_DATA
** Outbound Interrupt Status Register - OISR
*******************************************************************************
*/
-#define ARCMSR_MU_OUTBOUND_INTERRUPT_STATUS_REG 0x30
-#define ARCMSR_MU_OUTBOUND_PCI_INT 0x10
-#define ARCMSR_MU_OUTBOUND_POSTQUEUE_INT 0x08
-#define ARCMSR_MU_OUTBOUND_DOORBELL_INT 0x04
-#define ARCMSR_MU_OUTBOUND_MESSAGE1_INT 0x02
-#define ARCMSR_MU_OUTBOUND_MESSAGE0_INT 0x01
-#define ARCMSR_MU_OUTBOUND_HANDLE_INT \
+#define ARCMSR_MU_OUTBOUND_INTERRUPT_STATUS_REG 0x30
+#define ARCMSR_MU_OUTBOUND_PCI_INT 0x10
+#define ARCMSR_MU_OUTBOUND_POSTQUEUE_INT 0x08
+#define ARCMSR_MU_OUTBOUND_DOORBELL_INT 0x04
+#define ARCMSR_MU_OUTBOUND_MESSAGE1_INT 0x02
+#define ARCMSR_MU_OUTBOUND_MESSAGE0_INT 0x01
+#define ARCMSR_MU_OUTBOUND_HANDLE_INT \
(ARCMSR_MU_OUTBOUND_MESSAGE0_INT \
|ARCMSR_MU_OUTBOUND_MESSAGE1_INT \
|ARCMSR_MU_OUTBOUND_DOORBELL_INT \
@@ -935,13 +935,13 @@ struct SENSE_DATA
** Outbound Interrupt Mask Register - OIMR
*******************************************************************************
*/
-#define ARCMSR_MU_OUTBOUND_INTERRUPT_MASK_REG 0x34
-#define ARCMSR_MU_OUTBOUND_PCI_INTMASKENABLE 0x10
-#define ARCMSR_MU_OUTBOUND_POSTQUEUE_INTMASKENABLE 0x08
-#define ARCMSR_MU_OUTBOUND_DOORBELL_INTMASKENABLE 0x04
-#define ARCMSR_MU_OUTBOUND_MESSAGE1_INTMASKENABLE 0x02
-#define ARCMSR_MU_OUTBOUND_MESSAGE0_INTMASKENABLE 0x01
-#define ARCMSR_MU_OUTBOUND_ALL_INTMASKENABLE 0x1F
+#define ARCMSR_MU_OUTBOUND_INTERRUPT_MASK_REG 0x34
+#define ARCMSR_MU_OUTBOUND_PCI_INTMASKENABLE 0x10
+#define ARCMSR_MU_OUTBOUND_POSTQUEUE_INTMASKENABLE 0x08
+#define ARCMSR_MU_OUTBOUND_DOORBELL_INTMASKENABLE 0x04
+#define ARCMSR_MU_OUTBOUND_MESSAGE1_INTMASKENABLE 0x02
+#define ARCMSR_MU_OUTBOUND_MESSAGE0_INTMASKENABLE 0x01
+#define ARCMSR_MU_OUTBOUND_ALL_INTMASKENABLE 0x1F
extern void arcmsr_write_ioctldata2iop(struct AdapterControlBlock *);
extern uint32_t arcmsr_Read_iop_rqbuffer_data(struct AdapterControlBlock *,
diff -uprN a/drivers/scsi/arcmsr/arcmsr_hba.c b/drivers/scsi/arcmsr/arcmsr_hba.c
--- a/drivers/scsi/arcmsr/arcmsr_hba.c 2017-11-08 18:55:50.000000000 +0800
+++ b/drivers/scsi/arcmsr/arcmsr_hba.c 2017-11-08 18:56:34.000000000 +0800
@@ -142,14 +142,14 @@ static struct scsi_host_template arcmsr_
.name = "Areca SAS/SATA RAID driver",
.info = arcmsr_info,
.queuecommand = arcmsr_queue_command,
- .eh_abort_handler = arcmsr_abort,
+ .eh_abort_handler = arcmsr_abort,
.eh_bus_reset_handler = arcmsr_bus_reset,
.bios_param = arcmsr_bios_param,
.change_queue_depth = arcmsr_adjust_disk_queue_depth,
.can_queue = ARCMSR_DEFAULT_OUTSTANDING_CMD,
- .this_id = ARCMSR_SCSI_INITIATOR_ID,
- .sg_tablesize = ARCMSR_DEFAULT_SG_ENTRIES,
- .max_sectors = ARCMSR_MAX_XFER_SECTORS_C,
+ .this_id = ARCMSR_SCSI_INITIATOR_ID,
+ .sg_tablesize = ARCMSR_DEFAULT_SG_ENTRIES,
+ .max_sectors = ARCMSR_MAX_XFER_SECTORS_C,
.cmd_per_lun = ARCMSR_DEFAULT_CMD_PERLUN,
.use_clustering = ENABLE_CLUSTERING,
.shost_attrs = arcmsr_host_attrs,
@@ -207,7 +207,7 @@ MODULE_DEVICE_TABLE(pci, arcmsr_device_i
static struct pci_driver arcmsr_pci_driver = {
.name = "arcmsr",
- .id_table = arcmsr_device_id_table,
+ .id_table = arcmsr_device_id_table,
.probe = arcmsr_probe,
.remove = arcmsr_remove,
.suspend = arcmsr_suspend,
^ permalink raw reply [flat|nested] only message in thread
only message in thread, other threads:[~2017-11-09 8:30 UTC | newest]
Thread overview: (only message) (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2017-11-09 0:30 [PATCH 12/13] scsi: arcmsr: adjust some tab or white-space to make text alignment Ching Huang
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).