* int3403_driver_init needs over 330 ms to finish
@ 2018-03-13 19:39 Paul Menzel
2018-03-14 7:32 ` Zhang Rui
0 siblings, 1 reply; 3+ messages in thread
From: Paul Menzel @ 2018-03-13 19:39 UTC (permalink / raw)
To: Zhang Rui, Eduardo Valentin; +Cc: linux-pm, linux-kernel
[-- Attachment #1: Type: text/plain, Size: 373 bytes --]
Dear Linux folks,
Booting the Dell XPS 13 9370 with Linux 4.16-rc4+ and `initcall_debug`,
shows it is shown that int3403_driver_init needs over 330 ms to run.
[ 2.524839] initcall int3403_driver_init+0x0/0x1000
[int3403_thermal] returned 0 after 333972 usecs
Please find all Linux messages attached.
Is there a way to reduce that time?
Kind regards,
Paul
[-- Attachment #2: 20180313–linux_4.16-rc4–messages.txt --]
[-- Type: text/plain, Size: 124134 bytes --]
[ 0.489451] initcall pci_iommu_init+0x0/0x3f returned 0 after 36 usecs
[ 0.489453] calling calgary_fixup_tce_spaces+0x0/0xff @ 1
[ 0.489454] initcall calgary_fixup_tce_spaces+0x0/0xff returned -19 after 0 usecs
[ 0.489456] calling ir_dev_scope_init+0x0/0x33 @ 1
[ 0.489458] initcall ir_dev_scope_init+0x0/0x33 returned 0 after 0 usecs
[ 0.489467] calling ia32_binfmt_init+0x0/0x14 @ 1
[ 0.489471] initcall ia32_binfmt_init+0x0/0x14 returned 0 after 2 usecs
[ 0.489472] calling amd_uncore_init+0x0/0x275 @ 1
[ 0.489473] initcall amd_uncore_init+0x0/0x275 returned -19 after 0 usecs
[ 0.489474] calling amd_ibs_init+0x0/0x18d @ 1
[ 0.489476] initcall amd_ibs_init+0x0/0x18d returned -19 after 0 usecs
[ 0.489477] calling amd_iommu_pc_init+0x0/0x26b @ 1
[ 0.489478] initcall amd_iommu_pc_init+0x0/0x26b returned -19 after 0 usecs
[ 0.489479] calling msr_init+0x0/0xf1 @ 1
[ 0.489484] initcall msr_init+0x0/0xf1 returned 0 after 3 usecs
[ 0.489485] calling register_kernel_offset_dumper+0x0/0x1b @ 1
[ 0.489486] initcall register_kernel_offset_dumper+0x0/0x1b returned 0 after 0 usecs
[ 0.489487] calling i8259A_init_ops+0x0/0x21 @ 1
[ 0.489489] initcall i8259A_init_ops+0x0/0x21 returned 0 after 0 usecs
[ 0.489490] calling init_tsc_clocksource+0x0/0xc2 @ 1
[ 0.489491] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x396d519840e, max_idle_ns: 881590569543 ns
[ 0.489506] clocksource: Switched to clocksource tsc
[ 0.489508] initcall init_tsc_clocksource+0x0/0xc2 returned 0 after 15 usecs
[ 0.489510] calling add_rtc_cmos+0x0/0xc9 @ 1
[ 0.489517] initcall add_rtc_cmos+0x0/0xc9 returned 0 after 5 usecs
[ 0.489519] calling i8237A_init_ops+0x0/0x14 @ 1
[ 0.489520] initcall i8237A_init_ops+0x0/0x14 returned 0 after 0 usecs
[ 0.489521] calling thermal_throttle_init_device+0x0/0x42 @ 1
[ 0.489578] initcall thermal_throttle_init_device+0x0/0x42 returned 0 after 53 usecs
[ 0.489579] calling ioapic_init_ops+0x0/0x14 @ 1
[ 0.489580] initcall ioapic_init_ops+0x0/0x14 returned 0 after 0 usecs
[ 0.489581] calling register_e820_pmem+0x0/0x42 @ 1
[ 0.489587] initcall register_e820_pmem+0x0/0x42 returned 0 after 4 usecs
[ 0.489588] calling add_pcspkr+0x0/0x6f @ 1
[ 0.489606] initcall add_pcspkr+0x0/0x6f returned 0 after 15 usecs
[ 0.489607] calling sysfb_init+0x0/0x9f @ 1
[ 0.489617] initcall sysfb_init+0x0/0x9f returned 0 after 8 usecs
[ 0.489618] calling audit_classes_init+0x0/0xaf @ 1
[ 0.489621] initcall audit_classes_init+0x0/0xaf returned 0 after 1 usecs
[ 0.489622] calling pt_dump_init+0x0/0x32 @ 1
[ 0.489624] initcall pt_dump_init+0x0/0x32 returned 0 after 0 usecs
[ 0.489625] calling init_aout_binfmt+0x0/0x16 @ 1
[ 0.489626] initcall init_aout_binfmt+0x0/0x16 returned 0 after 0 usecs
[ 0.489627] calling iosf_mbi_init+0x0/0x1a @ 1
[ 0.489644] initcall iosf_mbi_init+0x0/0x1a returned 0 after 16 usecs
[ 0.489645] calling proc_execdomains_init+0x0/0x1f @ 1
[ 0.489649] initcall proc_execdomains_init+0x0/0x1f returned 0 after 2 usecs
[ 0.489649] calling register_warn_debugfs+0x0/0x24 @ 1
[ 0.489654] initcall register_warn_debugfs+0x0/0x24 returned 0 after 3 usecs
[ 0.489655] calling cpuhp_sysfs_init+0x0/0x6d @ 1
[ 0.489664] initcall cpuhp_sysfs_init+0x0/0x6d returned 0 after 7 usecs
[ 0.489664] calling ioresources_init+0x0/0x36 @ 1
[ 0.489667] initcall ioresources_init+0x0/0x36 returned 0 after 1 usecs
[ 0.489668] calling init_sched_debug_procfs+0x0/0x29 @ 1
[ 0.489670] initcall init_sched_debug_procfs+0x0/0x29 returned 0 after 0 usecs
[ 0.489671] calling snapshot_device_init+0x0/0x11 @ 1
[ 0.489692] initcall snapshot_device_init+0x0/0x11 returned 0 after 18 usecs
[ 0.489693] calling irq_gc_init_ops+0x0/0x14 @ 1
[ 0.489694] initcall irq_gc_init_ops+0x0/0x14 returned 0 after 0 usecs
[ 0.489695] calling irq_pm_init_ops+0x0/0x14 @ 1
[ 0.489697] initcall irq_pm_init_ops+0x0/0x14 returned 0 after 0 usecs
[ 0.489698] calling klp_init+0x0/0x29 @ 1
[ 0.489700] initcall klp_init+0x0/0x29 returned 0 after 1 usecs
[ 0.489701] calling timekeeping_init_ops+0x0/0x14 @ 1
[ 0.489703] initcall timekeeping_init_ops+0x0/0x14 returned 0 after 0 usecs
[ 0.489704] calling init_clocksource_sysfs+0x0/0x69 @ 1
[ 0.489717] initcall init_clocksource_sysfs+0x0/0x69 returned 0 after 11 usecs
[ 0.489719] calling init_timer_list_procfs+0x0/0x29 @ 1
[ 0.489720] initcall init_timer_list_procfs+0x0/0x29 returned 0 after 0 usecs
[ 0.489722] calling alarmtimer_init+0x0/0x134 @ 1
[ 0.489741] initcall alarmtimer_init+0x0/0x134 returned 0 after 17 usecs
[ 0.489743] calling init_posix_timers+0x0/0x2a @ 1
[ 0.489753] initcall init_posix_timers+0x0/0x2a returned 0 after 8 usecs
[ 0.489754] calling clockevents_init_sysfs+0x0/0xc9 @ 1
[ 0.489802] initcall clockevents_init_sysfs+0x0/0xc9 returned 0 after 44 usecs
[ 0.489803] calling proc_dma_init+0x0/0x1f @ 1
[ 0.489805] initcall proc_dma_init+0x0/0x1f returned 0 after 0 usecs
[ 0.489807] calling proc_modules_init+0x0/0x1f @ 1
[ 0.489808] initcall proc_modules_init+0x0/0x1f returned 0 after 0 usecs
[ 0.489809] calling kallsyms_init+0x0/0x22 @ 1
[ 0.489810] initcall kallsyms_init+0x0/0x22 returned 0 after 0 usecs
[ 0.489811] calling pid_namespaces_init+0x0/0x40 @ 1
[ 0.489817] initcall pid_namespaces_init+0x0/0x40 returned 0 after 4 usecs
[ 0.489818] calling audit_watch_init+0x0/0x3a @ 1
[ 0.489819] initcall audit_watch_init+0x0/0x3a returned 0 after 0 usecs
[ 0.489820] calling audit_fsnotify_init+0x0/0x3a @ 1
[ 0.489820] initcall audit_fsnotify_init+0x0/0x3a returned 0 after 0 usecs
[ 0.489821] calling audit_tree_init+0x0/0x4d @ 1
[ 0.489822] initcall audit_tree_init+0x0/0x4d returned 0 after 0 usecs
[ 0.489823] calling init_kprobes+0x0/0x1f9 @ 1
[ 0.489940] initcall init_kprobes+0x0/0x1f9 returned 0 after 113 usecs
[ 0.489942] calling seccomp_sysctl_init+0x0/0x2c @ 1
[ 0.489949] initcall seccomp_sysctl_init+0x0/0x2c returned 0 after 5 usecs
[ 0.489949] calling utsname_sysctl_init+0x0/0x14 @ 1
[ 0.489953] initcall utsname_sysctl_init+0x0/0x14 returned 0 after 2 usecs
[ 0.489954] calling init_tracepoints+0x0/0x28 @ 1
[ 0.489955] initcall init_tracepoints+0x0/0x28 returned 0 after 0 usecs
[ 0.489956] calling stack_trace_init+0x0/0xb0 @ 1
[ 0.489961] initcall stack_trace_init+0x0/0xb0 returned 0 after 3 usecs
[ 0.489962] calling init_mmio_trace+0x0/0xc @ 1
[ 0.489964] initcall init_mmio_trace+0x0/0xc returned 0 after 0 usecs
[ 0.489965] calling init_blk_tracer+0x0/0x50 @ 1
[ 0.489969] initcall init_blk_tracer+0x0/0x50 returned 0 after 3 usecs
[ 0.489970] calling perf_event_sysfs_init+0x0/0x84 @ 1
[ 0.490021] initcall perf_event_sysfs_init+0x0/0x84 returned 0 after 47 usecs
[ 0.490022] calling init_uprobes+0x0/0x71 @ 1
[ 0.490024] initcall init_uprobes+0x0/0x71 returned 0 after 0 usecs
[ 0.490025] calling padata_driver_init+0x0/0x39 @ 1
[ 0.490026] initcall padata_driver_init+0x0/0x39 returned 0 after 0 usecs
[ 0.490027] calling system_trusted_keyring_init+0x0/0x61 @ 1
[ 0.490027] Initialise system trusted keyrings
[ 0.490031] initcall system_trusted_keyring_init+0x0/0x61 returned 0 after 3 usecs
[ 0.490033] calling kswapd_init+0x0/0x85 @ 1
[ 0.490059] initcall kswapd_init+0x0/0x85 returned 0 after 23 usecs
[ 0.490060] calling extfrag_debug_init+0x0/0x78 @ 1
[ 0.490063] initcall extfrag_debug_init+0x0/0x78 returned 0 after 1 usecs
[ 0.490064] calling mm_compute_batch_init+0x0/0x19 @ 1
[ 0.490066] initcall mm_compute_batch_init+0x0/0x19 returned 0 after 0 usecs
[ 0.490067] calling slab_proc_init+0x0/0x22 @ 1
[ 0.490069] initcall slab_proc_init+0x0/0x22 returned 0 after 0 usecs
[ 0.490070] calling workingset_init+0x0/0x82 @ 1
[ 0.490071] workingset: timestamp_bits=40 max_order=22 bucket_order=0
[ 0.490073] initcall workingset_init+0x0/0x82 returned 0 after 1 usecs
[ 0.490073] calling proc_vmalloc_init+0x0/0x22 @ 1
[ 0.490075] initcall proc_vmalloc_init+0x0/0x22 returned 0 after 0 usecs
[ 0.490076] calling procswaps_init+0x0/0x1f @ 1
[ 0.490077] initcall procswaps_init+0x0/0x1f returned 0 after 0 usecs
[ 0.490078] calling init_frontswap+0x0/0x91 @ 1
[ 0.490085] initcall init_frontswap+0x0/0x91 returned 0 after 5 usecs
[ 0.490086] calling slab_sysfs_init+0x0/0xfa @ 1
[ 0.490732] initcall slab_sysfs_init+0x0/0xfa returned 0 after 630 usecs
[ 0.490733] calling init_zbud+0x0/0x20 @ 1
[ 0.490734] zbud: loaded
[ 0.490735] initcall init_zbud+0x0/0x20 returned 0 after 0 usecs
[ 0.490736] calling fcntl_init+0x0/0x2a @ 1
[ 0.490738] initcall fcntl_init+0x0/0x2a returned 0 after 1 usecs
[ 0.490739] calling proc_filesystems_init+0x0/0x1f @ 1
[ 0.490741] initcall proc_filesystems_init+0x0/0x1f returned 0 after 0 usecs
[ 0.490742] calling start_dirtytime_writeback+0x0/0x2a @ 1
[ 0.490746] initcall start_dirtytime_writeback+0x0/0x2a returned 0 after 2 usecs
[ 0.490747] calling blkdev_init+0x0/0x2a @ 1
[ 0.490754] initcall blkdev_init+0x0/0x2a returned 0 after 5 usecs
[ 0.490755] calling dio_init+0x0/0x2d @ 1
[ 0.490767] initcall dio_init+0x0/0x2d returned 0 after 10 usecs
[ 0.490768] calling dnotify_init+0x0/0x79 @ 1
[ 0.490781] initcall dnotify_init+0x0/0x79 returned 0 after 11 usecs
[ 0.490782] calling fanotify_user_setup+0x0/0x77 @ 1
[ 0.490785] initcall fanotify_user_setup+0x0/0x77 returned 0 after 1 usecs
[ 0.490787] calling userfaultfd_init+0x0/0x2e @ 1
[ 0.490796] initcall userfaultfd_init+0x0/0x2e returned 0 after 8 usecs
[ 0.490797] calling aio_setup+0x0/0xa1 @ 1
[ 0.490805] initcall aio_setup+0x0/0xa1 returned 0 after 6 usecs
[ 0.490806] calling init_sys32_ioctl+0x0/0x28 @ 1
[ 0.490951] initcall init_sys32_ioctl+0x0/0x28 returned 0 after 139 usecs
[ 0.490952] calling init_devpts_fs+0x0/0x28 @ 1
[ 0.490958] initcall init_devpts_fs+0x0/0x28 returned 0 after 4 usecs
[ 0.490959] calling init_pstore_fs+0x0/0x4a @ 1
[ 0.490962] initcall init_pstore_fs+0x0/0x4a returned 0 after 0 usecs
[ 0.490963] calling ipc_init+0x0/0x4c @ 1
[ 0.490966] initcall ipc_init+0x0/0x4c returned 0 after 2 usecs
[ 0.490968] calling ipc_sysctl_init+0x0/0x14 @ 1
[ 0.490973] initcall ipc_sysctl_init+0x0/0x14 returned 0 after 3 usecs
[ 0.490974] calling init_mqueue_fs+0x0/0xe7 @ 1
[ 0.490999] initcall init_mqueue_fs+0x0/0xe7 returned 0 after 22 usecs
[ 0.491000] calling key_proc_init+0x0/0x58 @ 1
[ 0.491003] initcall key_proc_init+0x0/0x58 returned 0 after 1 usecs
[ 0.491003] calling selinux_nf_ip_init+0x0/0x3b @ 1
[ 0.491004] initcall selinux_nf_ip_init+0x0/0x3b returned 0 after 0 usecs
[ 0.491005] calling init_sel_fs+0x0/0xa1 @ 1
[ 0.491006] initcall init_sel_fs+0x0/0xa1 returned 0 after 0 usecs
[ 0.491007] calling selnl_init+0x0/0x7d @ 1
[ 0.491010] initcall selnl_init+0x0/0x7d returned 0 after 3 usecs
[ 0.491011] calling sel_netif_init+0x0/0x3b @ 1
[ 0.491012] initcall sel_netif_init+0x0/0x3b returned 0 after 0 usecs
[ 0.491013] calling sel_netnode_init+0x0/0x48 @ 1
[ 0.491013] initcall sel_netnode_init+0x0/0x48 returned 0 after 0 usecs
[ 0.491014] calling sel_netport_init+0x0/0x48 @ 1
[ 0.491015] initcall sel_netport_init+0x0/0x48 returned 0 after 0 usecs
[ 0.491016] calling aurule_init+0x0/0x2b @ 1
[ 0.491017] initcall aurule_init+0x0/0x2b returned 0 after 0 usecs
[ 0.491018] calling crypto_algapi_init+0x0/0xd @ 1
[ 0.491019] initcall crypto_algapi_init+0x0/0xd returned 0 after 0 usecs
[ 0.491021] calling rsa_init+0x0/0x50 @ 1
[ 0.666754] initcall rsa_init+0x0/0x50 returned 0 after 171613 usecs
[ 0.666755] calling hmac_module_init+0x0/0x11 @ 1
[ 0.666756] initcall hmac_module_init+0x0/0x11 returned 0 after 0 usecs
[ 0.666757] calling crypto_null_mod_init+0x0/0x48 @ 1
[ 0.666824] initcall crypto_null_mod_init+0x0/0x48 returned 0 after 62 usecs
[ 0.666825] calling md5_mod_init+0x0/0x11 @ 1
[ 0.666851] initcall md5_mod_init+0x0/0x11 returned 0 after 24 usecs
[ 0.666851] calling sha1_generic_mod_init+0x0/0x11 @ 1
[ 0.666884] initcall sha1_generic_mod_init+0x0/0x11 returned 0 after 31 usecs
[ 0.666885] calling sha256_generic_mod_init+0x0/0x16 @ 1
[ 0.666984] initcall sha256_generic_mod_init+0x0/0x16 returned 0 after 95 usecs
[ 0.666985] calling aes_init+0x0/0x11 @ 1
[ 0.667012] initcall aes_init+0x0/0x11 returned 0 after 25 usecs
[ 0.667013] calling crct10dif_mod_init+0x0/0x11 @ 1
[ 0.667044] initcall crct10dif_mod_init+0x0/0x11 returned 0 after 29 usecs
[ 0.667044] calling lzo_mod_init+0x0/0x3a @ 1
[ 0.667141] initcall lzo_mod_init+0x0/0x3a returned 0 after 93 usecs
[ 0.667142] calling asymmetric_key_init+0x0/0x11 @ 1
[ 0.667143] Key type asymmetric registered
[ 0.667144] initcall asymmetric_key_init+0x0/0x11 returned 0 after 0 usecs
[ 0.667145] calling x509_key_init+0x0/0x11 @ 1
[ 0.667147] Asymmetric key parser 'x509' registered
[ 0.667148] initcall x509_key_init+0x0/0x11 returned 0 after 2 usecs
[ 0.667148] calling proc_genhd_init+0x0/0x36 @ 1
[ 0.667154] initcall proc_genhd_init+0x0/0x36 returned 0 after 4 usecs
[ 0.667155] calling bsg_init+0x0/0x194 @ 1
[ 0.667177] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
[ 0.667178] initcall bsg_init+0x0/0x194 returned 0 after 21 usecs
[ 0.667179] calling throtl_init+0x0/0x41 @ 1
[ 0.667199] initcall throtl_init+0x0/0x41 returned 0 after 17 usecs
[ 0.667199] calling noop_init+0x0/0x11 @ 1
[ 0.667200] io scheduler noop registered
[ 0.667201] initcall noop_init+0x0/0x11 returned 0 after 0 usecs
[ 0.667202] calling deadline_init+0x0/0x11 @ 1
[ 0.667202] io scheduler deadline registered
[ 0.667203] initcall deadline_init+0x0/0x11 returned 0 after 0 usecs
[ 0.667204] calling cfq_init+0x0/0x74 @ 1
[ 0.667228] io scheduler cfq registered (default)
[ 0.667229] initcall cfq_init+0x0/0x74 returned 0 after 23 usecs
[ 0.667230] calling deadline_init+0x0/0x11 @ 1
[ 0.667231] io scheduler mq-deadline registered
[ 0.667232] initcall deadline_init+0x0/0x11 returned 0 after 0 usecs
[ 0.667233] calling btree_module_init+0x0/0x25 @ 1
[ 0.667236] initcall btree_module_init+0x0/0x25 returned 0 after 1 usecs
[ 0.667236] calling crc_t10dif_mod_init+0x0/0x39 @ 1
[ 0.667238] initcall crc_t10dif_mod_init+0x0/0x39 returned 0 after 0 usecs
[ 0.667239] calling percpu_counter_startup+0x0/0x51 @ 1
[ 0.667262] initcall percpu_counter_startup+0x0/0x51 returned 0 after 21 usecs
[ 0.667263] calling digsig_init+0x0/0x36 @ 1
[ 0.667265] initcall digsig_init+0x0/0x36 returned 0 after 1 usecs
[ 0.667266] calling sg_pool_init+0x0/0xd9 @ 1
[ 0.667289] initcall sg_pool_init+0x0/0xd9 returned 0 after 20 usecs
[ 0.667290] calling phy_core_init+0x0/0x4a @ 1
[ 0.667292] initcall phy_core_init+0x0/0x4a returned 0 after 1 usecs
[ 0.667293] calling pci_proc_init+0x0/0x66 @ 1
[ 0.667308] initcall pci_proc_init+0x0/0x66 returned 0 after 13 usecs
[ 0.667309] calling pcie_portdrv_init+0x0/0x6f @ 1
[ 0.667732] initcall pcie_portdrv_init+0x0/0x6f returned 0 after 410 usecs
[ 0.667733] calling aer_service_init+0x0/0x32 @ 1
[ 0.667736] initcall aer_service_init+0x0/0x32 returned 0 after 1 usecs
[ 0.667737] calling pcie_pme_service_init+0x0/0x11 @ 1
[ 0.667741] initcall pcie_pme_service_init+0x0/0x11 returned 0 after 3 usecs
[ 0.667742] calling dpc_service_init+0x0/0x11 @ 1
[ 0.667746] initcall dpc_service_init+0x0/0x11 returned 0 after 3 usecs
[ 0.667747] calling pci_hotplug_init+0x0/0x31 @ 1
[ 0.667749] initcall pci_hotplug_init+0x0/0x31 returned 0 after 0 usecs
[ 0.667750] calling pcied_init+0x0/0x56 @ 1
[ 0.667752] initcall pcied_init+0x0/0x56 returned 0 after 1 usecs
[ 0.667753] calling xenfb_init+0x0/0x44 @ 1
[ 0.667755] initcall xenfb_init+0x0/0x44 returned -19 after 0 usecs
[ 0.667756] calling vesafb_driver_init+0x0/0x13 @ 1
[ 0.667762] initcall vesafb_driver_init+0x0/0x13 returned 0 after 4 usecs
[ 0.667763] calling efifb_driver_init+0x0/0x13 @ 1
[ 0.667767] efifb: probing for efifb
[ 0.667776] efifb: framebuffer at 0x50000000, using 32448k, total 32448k
[ 0.667776] efifb: mode is 3840x2160x32, linelength=15360, pages=1
[ 0.667777] efifb: scrolling: redraw
[ 0.667778] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 0.677440] Console: switching to colour frame buffer device 480x135
[ 0.687029] fb0: EFI VGA frame buffer device
[ 0.687034] initcall efifb_driver_init+0x0/0x13 returned 0 after 18817 usecs
[ 0.687035] calling intel_idle_init+0x0/0x5e2 @ 1
[ 0.687037] intel_idle: MWAIT substates: 0x11142120
[ 0.687038] intel_idle: v0.4.1 model 0x8E
[ 0.687233] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 0.687235] initcall intel_idle_init+0x0/0x5e2 returned 0 after 193 usecs
[ 0.687236] calling acpi_processor_driver_init+0x0/0x98 @ 1
[ 0.687925] initcall acpi_processor_driver_init+0x0/0x98 returned 0 after 671 usecs
[ 0.687926] calling acpi_hed_driver_init+0x0/0x11 @ 1
[ 0.687959] initcall acpi_hed_driver_init+0x0/0x11 returned 0 after 31 usecs
[ 0.687960] calling bgrt_init+0x0/0xb5 @ 1
[ 0.687964] initcall bgrt_init+0x0/0xb5 returned 0 after 2 usecs
[ 0.687965] calling erst_init+0x0/0x317 @ 1
[ 0.687966] initcall erst_init+0x0/0x317 returned 0 after 0 usecs
[ 0.687967] calling ghes_init+0x0/0x13d @ 1
[ 0.687968] initcall ghes_init+0x0/0x13d returned -19 after 0 usecs
[ 0.687969] calling extlog_init+0x0/0x372 @ 1
[ 0.687970] initcall extlog_init+0x0/0x372 returned -19 after 0 usecs
[ 0.687971] calling gpio_clk_driver_init+0x0/0x13 @ 1
[ 0.687976] initcall gpio_clk_driver_init+0x0/0x13 returned 0 after 3 usecs
[ 0.687977] calling plt_clk_driver_init+0x0/0x13 @ 1
[ 0.687980] initcall plt_clk_driver_init+0x0/0x13 returned 0 after 2 usecs
[ 0.687981] calling xenbus_probe_initcall+0x0/0x4e @ 1
[ 0.687982] initcall xenbus_probe_initcall+0x0/0x4e returned -19 after 0 usecs
[ 0.687983] calling xenbus_init+0x0/0x36 @ 1
[ 0.687984] initcall xenbus_init+0x0/0x36 returned -19 after 0 usecs
[ 0.687985] calling xenbus_backend_init+0x0/0x48 @ 1
[ 0.687986] initcall xenbus_backend_init+0x0/0x48 returned -19 after 0 usecs
[ 0.687987] calling hypervisor_subsys_init+0x0/0x25 @ 1
[ 0.687988] initcall hypervisor_subsys_init+0x0/0x25 returned -19 after 0 usecs
[ 0.687989] calling hyper_sysfs_init+0x0/0x188 @ 1
[ 0.687990] initcall hyper_sysfs_init+0x0/0x188 returned -19 after 0 usecs
[ 0.687991] calling platform_driver_init+0x0/0x1a @ 1
[ 0.687996] initcall platform_driver_init+0x0/0x1a returned 0 after 3 usecs
[ 0.687997] calling xen_late_init_mcelog+0x0/0x61 @ 1
[ 0.687998] initcall xen_late_init_mcelog+0x0/0x61 returned -19 after 0 usecs
[ 0.687999] calling n_null_init+0x0/0x1f @ 1
[ 0.688001] initcall n_null_init+0x0/0x1f returned 0 after 0 usecs
[ 0.688005] calling pty_init+0x0/0x1ec @ 1
[ 0.688028] initcall pty_init+0x0/0x1ec returned 0 after 21 usecs
[ 0.688029] calling sysrq_init+0x0/0x6c @ 1
[ 0.688031] initcall sysrq_init+0x0/0x6c returned 0 after 1 usecs
[ 0.688032] calling xen_hvc_init+0x0/0x277 @ 1
[ 0.688034] initcall xen_hvc_init+0x0/0x277 returned -19 after 0 usecs
[ 0.688035] calling serial8250_init+0x0/0x15b @ 1
[ 0.688035] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.688212] initcall serial8250_init+0x0/0x15b returned 0 after 171 usecs
[ 0.688213] calling serial_pci_driver_init+0x0/0x1a @ 1
[ 0.688224] initcall serial_pci_driver_init+0x0/0x1a returned 0 after 9 usecs
[ 0.688225] calling exar_pci_driver_init+0x0/0x1a @ 1
[ 0.688229] initcall exar_pci_driver_init+0x0/0x1a returned 0 after 3 usecs
[ 0.688230] calling dw8250_platform_driver_init+0x0/0x13 @ 1
[ 0.688239] initcall dw8250_platform_driver_init+0x0/0x13 returned 0 after 7 usecs
[ 0.688240] calling mid8250_pci_driver_init+0x0/0x1a @ 1
[ 0.688245] initcall mid8250_pci_driver_init+0x0/0x1a returned 0 after 3 usecs
[ 0.688246] calling hpet_init+0x0/0x65 @ 1
[ 0.688326] initcall hpet_init+0x0/0x65 returned 0 after 76 usecs
[ 0.688327] calling agp_init+0x0/0x24 @ 1
[ 0.688328] Linux agpgart interface v0.103
[ 0.688329] initcall agp_init+0x0/0x24 returned 0 after 0 usecs
[ 0.688330] calling agp_amd64_mod_init+0x0/0x20 @ 1
[ 0.688342] initcall agp_amd64_mod_init+0x0/0x20 returned -19 after 10 usecs
[ 0.688343] calling agp_intel_init+0x0/0x29 @ 1
[ 0.688349] initcall agp_intel_init+0x0/0x29 returned 0 after 4 usecs
[ 0.688350] calling agp_sis_init+0x0/0x29 @ 1
[ 0.688355] initcall agp_sis_init+0x0/0x29 returned 0 after 4 usecs
[ 0.688356] calling agp_via_init+0x0/0x29 @ 1
[ 0.688360] initcall agp_via_init+0x0/0x29 returned 0 after 3 usecs
[ 0.688361] calling init_tis+0x0/0xd8 @ 1
[ 0.688372] initcall init_tis+0x0/0xd8 returned 0 after 8 usecs
[ 0.688373] calling amd_iommu_v2_init+0x0/0x6e @ 1
[ 0.688374] AMD IOMMUv2 driver by Joerg Roedel <jroedel@suse.de>
[ 0.688375] AMD IOMMUv2 functionality not available on this system
[ 0.688376] initcall amd_iommu_v2_init+0x0/0x6e returned 0 after 1 usecs
[ 0.688377] calling cn_proc_init+0x0/0x36 @ 1
[ 0.688379] initcall cn_proc_init+0x0/0x36 returned 0 after 0 usecs
[ 0.688381] calling topology_sysfs_init+0x0/0x30 @ 1
[ 0.688393] initcall topology_sysfs_init+0x0/0x30 returned 0 after 11 usecs
[ 0.688395] calling cacheinfo_sysfs_init+0x0/0x2c @ 1
[ 0.688644] initcall cacheinfo_sysfs_init+0x0/0x2c returned 172 after 241 usecs
[ 0.688645] calling devcoredump_init+0x0/0x18 @ 1
[ 0.688648] initcall devcoredump_init+0x0/0x18 returned 0 after 2 usecs
[ 0.688650] calling mac_hid_init+0x0/0x22 @ 1
[ 0.688652] initcall mac_hid_init+0x0/0x22 returned 0 after 1 usecs
[ 0.688654] calling net_olddevs_init+0x0/0x5d @ 1
[ 0.688657] initcall net_olddevs_init+0x0/0x5d returned 0 after 1 usecs
[ 0.688658] calling cavium_ptp_init_module+0x0/0x1a @ 1
[ 0.688664] initcall cavium_ptp_init_module+0x0/0x1a returned 0 after 4 usecs
[ 0.688665] calling ledtrig_usb_init+0x0/0x2e @ 1
[ 0.688667] initcall ledtrig_usb_init+0x0/0x2e returned 0 after 0 usecs
[ 0.688668] calling i8042_init+0x0/0x462 @ 1
[ 0.688683] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 0.690276] i8042: Warning: Keylock active
[ 0.691666] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.691668] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.691695] initcall i8042_init+0x0/0x462 returned 0 after 2954 usecs
[ 0.691696] calling input_leds_init+0x0/0x11 @ 1
[ 0.691697] initcall input_leds_init+0x0/0x11 returned 0 after 0 usecs
[ 0.691697] calling mousedev_init+0x0/0x81 @ 1
[ 0.691729] mousedev: PS/2 mouse device common for all mice
[ 0.691730] initcall mousedev_init+0x0/0x81 returned 0 after 31 usecs
[ 0.691731] calling atkbd_init+0x0/0x26 @ 1
[ 0.691736] initcall atkbd_init+0x0/0x26 returned 0 after 3 usecs
[ 0.691737] calling xenkbd_init+0x0/0x44 @ 1
[ 0.691738] initcall xenkbd_init+0x0/0x44 returned -19 after 0 usecs
[ 0.691738] calling cmos_init+0x0/0x6c @ 1
[ 0.691766] rtc_cmos 00:01: RTC can wake from S4
[ 0.692199] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
[ 0.692280] rtc_cmos 00:01: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 0.692285] initcall cmos_init+0x0/0x6c returned 0 after 532 usecs
[ 0.692286] calling intel_pstate_init+0x0/0x31c @ 1
[ 0.692287] intel_pstate: Intel P-state driver initializing
[ 0.692590] intel_pstate: HWP enabled
[ 0.692591] initcall intel_pstate_init+0x0/0x31c returned 0 after 297 usecs
[ 0.692592] calling ledtrig_disk_init+0x0/0x2e @ 1
[ 0.692594] initcall ledtrig_disk_init+0x0/0x2e returned 0 after 0 usecs
[ 0.692594] calling ledtrig_mtd_init+0x0/0x2e @ 1
[ 0.692596] initcall ledtrig_mtd_init+0x0/0x2e returned 0 after 0 usecs
[ 0.692596] calling ledtrig_cpu_init+0x0/0xd3 @ 1
[ 0.692665] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.692668] initcall ledtrig_cpu_init+0x0/0xd3 returned 0 after 67 usecs
[ 0.692669] calling ledtrig_panic_init+0x0/0x39 @ 1
[ 0.692670] initcall ledtrig_panic_init+0x0/0x39 returned 0 after 0 usecs
[ 0.692672] calling dmi_sysfs_init+0x0/0xdc @ 1
[ 0.692769] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 0.692861] initcall dmi_sysfs_init+0x0/0xdc returned 0 after 183 usecs
[ 0.692862] calling efi_load_efivars+0x0/0x71 @ 1
[ 0.692873] initcall efi_load_efivars+0x0/0x71 returned 0 after 8 usecs
[ 0.692874] calling esrt_sysfs_init+0x0/0x2ef @ 1
[ 0.692882] initcall esrt_sysfs_init+0x0/0x2ef returned 0 after 6 usecs
[ 0.692882] calling pmc_atom_init+0x0/0x283 @ 1
[ 0.692886] initcall pmc_atom_init+0x0/0x283 returned -19 after 2 usecs
[ 0.692886] calling powercap_init+0x0/0x2a7 @ 1
[ 0.692914] initcall powercap_init+0x0/0x2a7 returned 0 after 26 usecs
[ 0.692916] calling pm_check_save_msr+0x0/0x20 @ 1
[ 0.692917] initcall pm_check_save_msr+0x0/0x20 returned 0 after 0 usecs
[ 0.692918] calling sock_diag_init+0x0/0x34 @ 1
[ 0.692946] initcall sock_diag_init+0x0/0x34 returned 0 after 26 usecs
[ 0.692948] calling blackhole_init+0x0/0x11 @ 1
[ 0.692950] initcall blackhole_init+0x0/0x11 returned 0 after 0 usecs
[ 0.692950] calling gre_offload_init+0x0/0x49 @ 1
[ 0.692952] initcall gre_offload_init+0x0/0x49 returned 0 after 0 usecs
[ 0.692952] calling sysctl_ipv4_init+0x0/0x4c @ 1
[ 0.692978] initcall sysctl_ipv4_init+0x0/0x4c returned 0 after 23 usecs
[ 0.692979] calling cubictcp_register+0x0/0x59 @ 1
[ 0.692980] initcall cubictcp_register+0x0/0x59 returned 0 after 0 usecs
[ 0.692981] calling inet6_init+0x0/0x351 @ 1
[ 0.693054] NET: Registered protocol family 10
[ 0.695810] Segment Routing with IPv6
[ 0.695834] initcall inet6_init+0x0/0x351 returned 0 after 2784 usecs
[ 0.695835] calling mip6_init+0x0/0xb9 @ 1
[ 0.695835] mip6: Mobile IPv6
[ 0.695836] initcall mip6_init+0x0/0xb9 returned 0 after 0 usecs
[ 0.695837] calling packet_init+0x0/0x42 @ 1
[ 0.695838] NET: Registered protocol family 17
[ 0.695840] initcall packet_init+0x0/0x42 returned 0 after 1 usecs
[ 0.695841] calling dcbnl_init+0x0/0x4d @ 1
[ 0.695843] initcall dcbnl_init+0x0/0x4d returned 0 after 0 usecs
[ 0.695844] calling mpls_gso_init+0x0/0x2c @ 1
[ 0.695844] mpls_gso: MPLS GSO support
[ 0.695845] initcall mpls_gso_init+0x0/0x2c returned 0 after 0 usecs
[ 0.695847] calling mcheck_init_device+0x0/0x12f @ 1
[ 0.696207] initcall mcheck_init_device+0x0/0x12f returned 0 after 350 usecs
[ 0.696225] calling mcheck_late_init+0x0/0x70 @ 1
[ 0.696229] initcall mcheck_late_init+0x0/0x70 returned 0 after 2 usecs
[ 0.696230] calling severities_debugfs_init+0x0/0x3b @ 1
[ 0.696232] initcall severities_debugfs_init+0x0/0x3b returned 0 after 0 usecs
[ 0.696245] calling threshold_init_device+0x0/0x4b @ 1
[ 0.696247] initcall threshold_init_device+0x0/0x4b returned 0 after 0 usecs
[ 0.696248] calling microcode_init+0x0/0x1fb @ 1
[ 0.696281] microcode: sig=0x806ea, pf=0x80, revision=0x70
[ 0.696479] microcode: Microcode Update Driver: v2.2.
[ 0.696481] initcall microcode_init+0x0/0x1fb returned 0 after 225 usecs
[ 0.696482] calling hpet_insert_resource+0x0/0x23 @ 1
[ 0.696483] initcall hpet_insert_resource+0x0/0x23 returned 0 after 0 usecs
[ 0.696484] calling update_mp_table+0x0/0x509 @ 1
[ 0.696485] initcall update_mp_table+0x0/0x509 returned 0 after 0 usecs
[ 0.696486] calling lapic_insert_resource+0x0/0x3f @ 1
[ 0.696488] initcall lapic_insert_resource+0x0/0x3f returned 0 after 0 usecs
[ 0.696489] calling print_ICs+0x0/0x18d @ 1
[ 0.696490] initcall print_ICs+0x0/0x18d returned 0 after 0 usecs
[ 0.696491] calling pat_memtype_list_init+0x0/0x32 @ 1
[ 0.696493] initcall pat_memtype_list_init+0x0/0x32 returned 0 after 0 usecs
[ 0.696494] calling create_tlb_single_page_flush_ceiling+0x0/0x29 @ 1
[ 0.696496] initcall create_tlb_single_page_flush_ceiling+0x0/0x29 returned 0 after 0 usecs
[ 0.696497] calling create_init_pkru_value+0x0/0x29 @ 1
[ 0.696498] initcall create_init_pkru_value+0x0/0x29 returned 0 after 0 usecs
[ 0.696500] calling init_oops_id+0x0/0x40 @ 1
[ 0.696502] initcall init_oops_id+0x0/0x40 returned 0 after 0 usecs
[ 0.696503] calling sched_clock_init_late+0x0/0x7b @ 1
[ 0.696504] sched_clock: Marking stable (696477337, 0)->(680980934, 15496403)
[ 0.696713] initcall sched_clock_init_late+0x0/0x7b returned 0 after 203 usecs
[ 0.696714] calling sched_init_debug+0x0/0x3e @ 1
[ 0.696716] initcall sched_init_debug+0x0/0x3e returned 0 after 1 usecs
[ 0.696718] calling pm_qos_power_init+0x0/0xad @ 1
[ 0.696761] initcall pm_qos_power_init+0x0/0xad returned 0 after 40 usecs
[ 0.696762] calling pm_debugfs_init+0x0/0x24 @ 1
[ 0.696763] initcall pm_debugfs_init+0x0/0x24 returned 0 after 0 usecs
[ 0.696765] calling printk_late_init+0x0/0x122 @ 1
[ 0.696766] initcall printk_late_init+0x0/0x122 returned 0 after 0 usecs
[ 0.696767] calling tk_debug_sleep_time_init+0x0/0x3c @ 1
[ 0.696772] initcall tk_debug_sleep_time_init+0x0/0x3c returned 0 after 3 usecs
[ 0.696773] calling debugfs_kprobe_init+0x0/0xd2 @ 1
[ 0.696776] initcall debugfs_kprobe_init+0x0/0xd2 returned 0 after 1 usecs
[ 0.696777] calling taskstats_init+0x0/0x37 @ 1
[ 0.696779] registered taskstats version 1
[ 0.696780] initcall taskstats_init+0x0/0x37 returned 0 after 2 usecs
[ 0.696781] calling load_system_certificate_list+0x0/0xea @ 1
[ 0.696782] Loading compiled-in X.509 certificates
[ 0.696783] initcall load_system_certificate_list+0x0/0xea returned 0 after 0 usecs
[ 0.696784] calling fault_around_debugfs+0x0/0x35 @ 1
[ 0.696785] initcall fault_around_debugfs+0x0/0x35 returned 0 after 0 usecs
[ 0.696786] calling max_swapfiles_check+0x0/0x8 @ 1
[ 0.696787] initcall max_swapfiles_check+0x0/0x8 returned 0 after 0 usecs
[ 0.696788] calling init_zswap+0x0/0x446 @ 1
[ 0.696797] zswap: loaded using pool lzo/zbud
[ 0.696838] initcall init_zswap+0x0/0x446 returned 0 after 47 usecs
[ 0.696839] calling split_huge_pages_debugfs+0x0/0x35 @ 1
[ 0.696841] initcall split_huge_pages_debugfs+0x0/0x35 returned 0 after 0 usecs
[ 0.696842] calling check_early_ioremap_leak+0x0/0x39 @ 1
[ 0.696843] initcall check_early_ioremap_leak+0x0/0x39 returned 0 after 0 usecs
[ 0.696844] calling init_root_keyring+0x0/0xa @ 1
[ 0.696850] initcall init_root_keyring+0x0/0xa returned 0 after 4 usecs
[ 0.696851] calling init_profile_hash+0x0/0x7f @ 1
[ 0.696852] AppArmor: AppArmor sha1 policy hashing enabled
[ 0.696853] initcall init_profile_hash+0x0/0x7f returned 0 after 1 usecs
[ 0.696854] calling init_ima+0x0/0x35 @ 1
[ 0.696855] ima: No TPM chip found, activating TPM-bypass! (rc=-19)
[ 0.696864] initcall init_ima+0x0/0x35 returned 0 after 9 usecs
[ 0.696865] calling prandom_reseed+0x0/0x2a @ 1
[ 0.696870] initcall prandom_reseed+0x0/0x2a returned 0 after 3 usecs
[ 0.696871] calling init_error_injection+0x0/0x6a @ 1
[ 0.696874] initcall init_error_injection+0x0/0x6a returned 0 after 2 usecs
[ 0.696875] calling pci_resource_alignment_sysfs_init+0x0/0x18 @ 1
[ 0.696877] initcall pci_resource_alignment_sysfs_init+0x0/0x18 returned 0 after 0 usecs
[ 0.696878] calling pci_sysfs_init+0x0/0x50 @ 1
[ 0.697814] initcall pci_sysfs_init+0x0/0x50 returned 0 after 912 usecs
[ 0.697815] calling bert_init+0x0/0x23b @ 1
[ 0.697816] initcall bert_init+0x0/0x23b returned 0 after 0 usecs
[ 0.697817] calling clk_debug_init+0x0/0x13e @ 1
[ 0.697824] initcall clk_debug_init+0x0/0x13e returned 0 after 5 usecs
[ 0.697825] calling boot_wait_for_devices+0x0/0x29 @ 1
[ 0.697826] initcall boot_wait_for_devices+0x0/0x29 returned -19 after 0 usecs
[ 0.697828] calling dmar_free_unused_resources+0x0/0xcd @ 1
[ 0.697829] initcall dmar_free_unused_resources+0x0/0xcd returned 0 after 0 usecs
[ 0.697830] calling deferred_probe_initcall+0x0/0x30 @ 1
[ 0.697834] initcall deferred_probe_initcall+0x0/0x30 returned 0 after 2 usecs
[ 0.697836] calling genpd_debug_init+0x0/0x15c @ 1
[ 0.697838] initcall genpd_debug_init+0x0/0x15c returned 0 after 1 usecs
[ 0.697839] calling genpd_power_off_unused+0x0/0x7e @ 1
[ 0.697841] initcall genpd_power_off_unused+0x0/0x7e returned 0 after 0 usecs
[ 0.697841] calling rtc_hctosys+0x0/0x102 @ 1
[ 0.697941] rtc_cmos 00:01: setting system clock to 2018-03-13 17:12:39 UTC (1520961159)
[ 0.697942] initcall rtc_hctosys+0x0/0x102 returned 0 after 97 usecs
[ 0.697943] calling firmware_memmap_init+0x0/0x33 @ 1
[ 0.697967] initcall firmware_memmap_init+0x0/0x33 returned 0 after 22 usecs
[ 0.697969] calling register_update_efi_random_seed+0x0/0x20 @ 1
[ 0.697970] initcall register_update_efi_random_seed+0x0/0x20 returned 0 after 0 usecs
[ 0.697971] calling efi_shutdown_init+0x0/0x3c @ 1
[ 0.697972] initcall efi_shutdown_init+0x0/0x3c returned 0 after 0 usecs
[ 0.697973] calling pci_mmcfg_late_insert_resources+0x0/0x51 @ 1
[ 0.697975] initcall pci_mmcfg_late_insert_resources+0x0/0x51 returned 0 after 0 usecs
[ 0.697976] calling tcp_congestion_default+0x0/0x18 @ 1
[ 0.697977] initcall tcp_congestion_default+0x0/0x18 returned 0 after 0 usecs
[ 0.697978] calling software_resume+0x0/0x290 @ 1
[ 0.697979] initcall software_resume+0x0/0x290 returned -2 after 0 usecs
[ 0.697980] calling clear_boot_tracer+0x0/0x26 @ 1
[ 0.697982] initcall clear_boot_tracer+0x0/0x26 returned 0 after 0 usecs
[ 0.697983] calling clk_disable_unused+0x0/0x170 @ 1
[ 0.697985] initcall clk_disable_unused+0x0/0x170 returned 0 after 0 usecs
[ 0.698972] Freeing unused kernel memory: 1524K
[ 0.698973] Write protecting the kernel read-only data: 16384k
[ 0.699323] Freeing unused kernel memory: 2008K
[ 0.700390] Freeing unused kernel memory: 1020K
[ 0.703409] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 0.703410] x86/mm: Checking user space page tables
[ 0.706249] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 0.743901] calling fjes_init_module+0x0/0xd1 [fjes] @ 138
[ 0.744067] initcall fjes_init_module+0x0/0xd1 [fjes] returned -19 after 157 usecs
[ 0.749412] calling acpi_thermal_init+0x0/0x1000 [thermal] @ 141
[ 0.749420] calling hid_init+0x0/0x5d [hid] @ 144
[ 0.749446] hidraw: raw HID events driver (C) Jiri Kosina
[ 0.749452] initcall hid_init+0x0/0x5d [hid] returned 0 after 26 usecs
[ 0.749737] calling i2c_hid_driver_init+0x0/0x1000 [i2c_hid] @ 144
[ 0.749747] initcall i2c_hid_driver_init+0x0/0x1000 [i2c_hid] returned 0 after 7 usecs
[ 0.752492] calling usb_init+0x0/0x170 [usbcore] @ 137
[ 0.752496] ACPI: bus type USB registered
[ 0.752517] usbcore: registered new interface driver usbfs
[ 0.752524] usbcore: registered new interface driver hub
[ 0.752553] usbcore: registered new device driver usb
[ 0.752561] initcall usb_init+0x0/0x170 [usbcore] returned 0 after 59 usecs
[ 0.753952] calling i2c_i801_init+0x0/0x1000 [i2c_i801] @ 142
[ 0.753979] calling init_module+0x0/0xcd6 [nvme_core] @ 146
[ 0.753998] calling crc32c_intel_mod_init+0x0/0x1000 [crc32c_intel] @ 139
[ 0.754038] initcall crc32c_intel_mod_init+0x0/0x1000 [crc32c_intel] returned 0 after 37 usecs
[ 0.754618] i801_smbus 0000:00:1f.4: SPD Write Disable is set
[ 0.754650] thermal LNXTHERM:00: registered as thermal_zone0
[ 0.754652] ACPI: Thermal Zone [THM] (25 C)
[ 0.754660] i801_smbus 0000:00:1f.4: SMBus using PCI interrupt
[ 0.754678] initcall acpi_thermal_init+0x0/0x1000 [thermal] returned 0 after 5138 usecs
[ 0.754688] calling psmouse_init+0x0/0x8a [psmouse] @ 136
[ 0.754711] initcall psmouse_init+0x0/0x8a [psmouse] returned 0 after 18 usecs
[ 0.757172] calling xhci_hcd_init+0x0/0x1f [xhci_hcd] @ 137
[ 0.757179] initcall xhci_hcd_init+0x0/0x1f [xhci_hcd] returned 0 after 2 usecs
[ 0.757366] calling xhci_pci_init+0x0/0x1000 [xhci_pci] @ 137
[ 0.757456] initcall init_module+0x0/0xcd6 [nvme_core] returned 0 after 3389 usecs
[ 0.757932] calling nvme_init+0x0/0x1000 [nvme] @ 146
[ 0.757978] nvme nvme0: pci function 0000:6e:00.0
[ 0.758000] initcall nvme_init+0x0/0x1000 [nvme] returned 0 after 63 usecs
[ 0.768289] initcall i2c_i801_init+0x0/0x1000 [i2c_i801] returned 0 after 13995 usecs
[ 0.768416] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 0.768419] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
[ 0.769469] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x00109810
[ 0.769473] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[ 0.769571] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.769572] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.769573] usb usb1: Product: xHCI Host Controller
[ 0.769573] usb usb1: Manufacturer: Linux 4.16.0-rc4+ xhci-hcd
[ 0.769574] usb usb1: SerialNumber: 0000:00:14.0
[ 0.769691] hub 1-0:1.0: USB hub found
[ 0.769706] hub 1-0:1.0: 12 ports detected
[ 0.770283] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 0.770287] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[ 0.770316] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
[ 0.770318] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.770319] usb usb2: Product: xHCI Host Controller
[ 0.770320] usb usb2: Manufacturer: Linux 4.16.0-rc4+ xhci-hcd
[ 0.770321] usb usb2: SerialNumber: 0000:00:14.0
[ 0.770439] hub 2-0:1.0: USB hub found
[ 0.770449] hub 2-0:1.0: 6 ports detected
[ 0.770610] usb: port power management may be unreliable
[ 0.770911] initcall xhci_pci_init+0x0/0x1000 [xhci_pci] returned 0 after 13224 usecs
[ 0.981778] nvme0n1: p1 p2 p3 p4
[ 1.104188] usb 1-5: new high-speed USB device number 2 using xhci_hcd
[ 1.298868] usb 1-5: New USB device found, idVendor=0bda, idProduct=58f4
[ 1.298873] usb 1-5: New USB device strings: Mfr=3, Product=1, SerialNumber=2
[ 1.298876] usb 1-5: Product: Integrated_Webcam_HD
[ 1.298880] usb 1-5: Manufacturer: CN0FFMHCLOG0081JBA49A00
[ 1.298883] usb 1-5: SerialNumber: 200901010001
[ 1.428076] usb 1-7: new full-speed USB device number 3 using xhci_hcd
[ 1.533815] psmouse serio1: synaptics: queried max coordinates: x [..5666], y [..4734]
[ 1.561666] psmouse serio1: synaptics: queried min coordinates: x [1276..], y [1118..]
[ 1.561672] psmouse serio1: synaptics: The touchpad can support a better bus than the too old PS/2 protocol. Make sure MOUSE_PS2_SYNAPTICS_SMBUS and RMI4_SMB are enabled to get a better touchpad experience.
[ 1.576896] usb 1-7: New USB device found, idVendor=0489, idProduct=e0a2
[ 1.576900] usb 1-7: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.615156] psmouse serio1: synaptics: Touchpad model: 1, fw: 8.2, id: 0x1e2a1, caps: 0xf00323/0x840300/0x12e800/0x0, board id: 3038, fw id: 2375007
[ 1.650125] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input2
[ 1.879395] calling fscrypt_init+0x0/0x1000 [fscrypto] @ 199
[ 1.879624] initcall fscrypt_init+0x0/0x1000 [fscrypto] returned 0 after 209 usecs
[ 1.882487] calling journal_init+0x0/0x556 [jbd2] @ 199
[ 1.882541] initcall journal_init+0x0/0x556 [jbd2] returned 0 after 47 usecs
[ 1.882728] calling mbcache_init+0x0/0x1000 [mbcache] @ 199
[ 1.882749] initcall mbcache_init+0x0/0x1000 [mbcache] returned 0 after 18 usecs
[ 1.891069] calling ext4_init_fs+0x0/0x1a8 [ext4] @ 199
[ 1.891165] initcall ext4_init_fs+0x0/0x1a8 [ext4] returned 0 after 83 usecs
[ 1.907121] EXT4-fs (nvme0n1p3): mounted filesystem with ordered data mode. Opts: (null)
[ 1.964544] calling init_autofs4_fs+0x0/0x26 [autofs4] @ 1
[ 1.964597] initcall init_autofs4_fs+0x0/0x26 [autofs4] returned 0 after 46 usecs
[ 1.967358] calling xt_init+0x0/0x1000 [x_tables] @ 1
[ 1.967366] initcall xt_init+0x0/0x1000 [x_tables] returned 0 after 1 usecs
[ 1.969355] calling ip_tables_init+0x0/0x1000 [ip_tables] @ 1
[ 1.969371] initcall ip_tables_init+0x0/0x1000 [ip_tables] returned 0 after 10 usecs
[ 1.978811] calling efivarfs_init+0x0/0x1000 [efivarfs] @ 229
[ 1.978818] initcall efivarfs_init+0x0/0x1000 [efivarfs] returned 0 after 2 usecs
[ 2.046628] systemd[1]: systemd 238 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid)
[ 2.064434] systemd[1]: Detected architecture x86-64.
[ 2.066267] systemd[1]: Set hostname to <xps139370>.
[ 2.110892] systemd[1]: Created slice User and Session Slice.
[ 2.110917] systemd[1]: Reached target Slices.
[ 2.110954] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[ 2.111125] systemd[1]: Created slice system-systemd\x2dfsck.slice.
[ 2.111167] systemd[1]: Listening on Journal Socket (/dev/log).
[ 2.111193] systemd[1]: Listening on udev Kernel Socket.
[ 2.111200] systemd[1]: Reached target User and Group Name Lookups.
[ 2.123126] EXT4-fs (nvme0n1p3): re-mounted. Opts: errors=remount-ro
[ 2.173855] calling acpi_cpufreq_init+0x0/0x1000 [acpi_cpufreq] @ 282
[ 2.173858] initcall acpi_cpufreq_init+0x0/0x1000 [acpi_cpufreq] returned -17 after 0 usecs
[ 2.174364] calling pcc_cpufreq_init+0x0/0xe88 [pcc_cpufreq] @ 290
[ 2.174377] initcall pcc_cpufreq_init+0x0/0xe88 [pcc_cpufreq] returned -19 after 11 usecs
[ 2.179008] calling acpi_ac_init+0x0/0x1000 [ac] @ 280
[ 2.179471] calling acpi_pad_init+0x0/0x1000 [acpi_pad] @ 285
[ 2.181659] calling acpi_button_driver_init+0x0/0x1000 [button] @ 298
[ 2.182218] systemd-journald[253]: Received request to flush runtime journal from PID 1
[ 2.182848] calling int3403_driver_init+0x0/0x1000 [int3403_thermal] @ 299
[ 2.183414] calling acpi_video_init+0x0/0x1000 [video] @ 292
[ 2.183421] calling intel_hid_init+0x0/0xf83 [intel_hid] @ 279
[ 2.183423] initcall acpi_video_init+0x0/0x1000 [video] returned 0 after 5 usecs
[ 2.183645] input: Intel HID events as /devices/platform/INT33D5:00/input/input3
[ 2.183880] calling int3400_thermal_driver_init+0x0/0x1000 [int3400_thermal] @ 300
[ 2.184628] calling fjes_init_module+0x0/0xd1 [fjes] @ 295
[ 2.184779] initcall fjes_init_module+0x0/0xd1 [fjes] returned -19 after 143 usecs
[ 2.185447] intel-hid INT33D5:00: platform supports 5 button array
[ 2.185487] ACPI: AC Adapter [AC] (on-line)
[ 2.185488] input: Intel HID 5 button array as /devices/platform/INT33D5:00/input/input4
[ 2.185516] initcall acpi_ac_init+0x0/0x1000 [ac] returned 0 after 6349 usecs
[ 2.186733] initcall acpi_pad_init+0x0/0x1000 [acpi_pad] returned 0 after 7088 usecs
[ 2.186759] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input5
[ 2.186769] ACPI: Lid Switch [LID0]
[ 2.186804] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input6
[ 2.186809] ACPI: Power Button [PBTN]
[ 2.186838] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input7
[ 2.186841] ACPI: Sleep Button [SBTN]
[ 2.186863] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input8
[ 2.186867] ACPI: Power Button [PWRF]
[ 2.186880] initcall acpi_button_driver_init+0x0/0x1000 [button] returned 0 after 5095 usecs
[ 2.194121] calling acpi_battery_init+0x0/0xf75 [battery] @ 285
[ 2.194126] initcall acpi_battery_init+0x0/0xf75 [battery] returned 0 after 2 usecs
[ 2.198738] calling acpi_wmi_init+0x0/0x1000 [wmi] @ 297
[ 2.208338] initcall intel_hid_init+0x0/0xf83 [intel_hid] returned 0 after 24325 usecs
[ 2.280359] calling intel_pch_thermal_driver_init+0x0/0x1000 [intel_pch_thermal] @ 293
[ 2.280401] calling proc_thermal_init+0x0/0x1000 [processor_thermal_device] @ 292
[ 2.280436] proc_thermal 0000:00:04.0: enabling device (0000 -> 0002)
[ 2.280546] calling pcc_cpufreq_init+0x0/0xe88 [pcc_cpufreq] @ 282
[ 2.280563] initcall pcc_cpufreq_init+0x0/0xe88 [pcc_cpufreq] returned -19 after 14 usecs
[ 2.280755] calling shpcd_init+0x0/0x1000 [shpchp] @ 298
[ 2.281211] calling media_devnode_init+0x0/0x1000 [media] @ 283
[ 2.281212] media: Linux media interface: v0.10
[ 2.281219] calling rfkill_init+0x0/0xed [rfkill] @ 296
[ 2.281221] initcall media_devnode_init+0x0/0x1000 [media] returned 0 after 5 usecs
[ 2.281276] initcall rfkill_init+0x0/0xed [rfkill] returned 0 after 50 usecs
[ 2.282033] calling mei_init+0x0/0xac [mei] @ 291
[ 2.282043] initcall mei_init+0x0/0xac [mei] returned 0 after 6 usecs
[ 2.282181] calling ecdh_init+0x0/0x20 [ecdh_generic] @ 296
[ 2.282652] calling intel_lpss_init+0x0/0x1000 [intel_lpss] @ 284
[ 2.282657] initcall intel_lpss_init+0x0/0x1000 [intel_lpss] returned 0 after 2 usecs
[ 2.283013] calling mei_me_driver_init+0x0/0x1000 [mei_me] @ 291
[ 2.283028] initcall mei_me_driver_init+0x0/0x1000 [mei_me] returned 0 after 11 usecs
[ 2.285598] calling videodev_init+0x0/0x7e [videodev] @ 279
[ 2.285599] Linux video capture interface: v2.00
[ 2.285606] initcall videodev_init+0x0/0x7e [videodev] returned 0 after 3 usecs
[ 2.287671] calling prng_mod_init+0x0/0x1000 [ansi_cprng] @ 309
[ 2.287676] calling intel_lpss_pci_driver_init+0x0/0x1000 [intel_lpss_pci] @ 284
[ 2.289792] calling drm_core_init+0x0/0xe3 [drm] @ 280
[ 2.289806] initcall drm_core_init+0x0/0xe3 [drm] returned 0 after 5 usecs
[ 2.289964] initcall prng_mod_init+0x0/0x1000 [ansi_cprng] returned 0 after 2235 usecs
[ 2.290668] calling drbg_init+0x0/0xf35 [drbg] @ 309
[ 2.291034] initcall drbg_init+0x0/0xf35 [drbg] returned 0 after 355 usecs
[ 2.292497] initcall int3400_thermal_driver_init+0x0/0x1000 [int3400_thermal] returned 0 after 106067 usecs
[ 2.292578] wmi_bus wmi_bus-PNP0C14:01: WQBC data block query control method not found
[ 2.292644] initcall acpi_wmi_init+0x0/0x1000 [wmi] returned 0 after 91701 usecs
[ 2.294091] initcall ecdh_init+0x0/0x20 [ecdh_generic] returned 0 after 11627 usecs
[ 2.294275] calling drm_kms_helper_init+0x0/0x15 [drm_kms_helper] @ 280
[ 2.294280] initcall drm_kms_helper_init+0x0/0x15 [drm_kms_helper] returned 0 after 0 usecs
[ 2.295116] calling uvc_init+0x0/0x1000 [uvcvideo] @ 279
[ 2.295791] uvcvideo: Found UVC 1.00 device Integrated_Webcam_HD (0bda:58f4)
[ 2.297886] uvcvideo 1-5:1.0: Entity type for entity Extension 4 was not initialized!
[ 2.297888] uvcvideo 1-5:1.0: Entity type for entity Extension 7 was not initialized!
[ 2.297889] uvcvideo 1-5:1.0: Entity type for entity Processing 2 was not initialized!
[ 2.297891] uvcvideo 1-5:1.0: Entity type for entity Camera 1 was not initialized!
[ 2.297941] input: Integrated_Webcam_HD: Integrate as /devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5:1.0/input/input9
[ 2.298495] uvcvideo: Unknown video format 00000032-0002-0010-8000-00aa00389b71
[ 2.298498] uvcvideo: Found UVC 1.00 device Integrated_Webcam_HD (0bda:58f4)
[ 2.300402] uvcvideo: Unable to create debugfs 1-2 directory.
[ 2.300465] uvcvideo 1-5:1.2: Entity type for entity Extension 10 was not initialized!
[ 2.300466] uvcvideo 1-5:1.2: Entity type for entity Extension 12 was not initialized!
[ 2.300467] uvcvideo 1-5:1.2: Entity type for entity Processing 9 was not initialized!
[ 2.300468] uvcvideo 1-5:1.2: Entity type for entity Camera 11 was not initialized!
[ 2.300516] input: Integrated_Webcam_HD: Integrate as /devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5:1.2/input/input10
[ 2.300544] usbcore: registered new interface driver uvcvideo
[ 2.300545] USB Video Class driver (1.1.1)
[ 2.300550] initcall uvc_init+0x0/0x1000 [uvcvideo] returned 0 after 5302 usecs
[ 2.301211] calling init_soundcore+0x0/0x1000 [soundcore] @ 297
[ 2.301218] initcall init_soundcore+0x0/0x1000 [soundcore] returned 0 after 4 usecs
[ 2.302332] calling bt_init+0x0/0xa5 [bluetooth] @ 290
[ 2.302333] Bluetooth: Core ver 2.22
[ 2.302340] NET: Registered protocol family 31
[ 2.302340] Bluetooth: HCI device and connection manager initialized
[ 2.302343] Bluetooth: HCI socket layer initialized
[ 2.302344] Bluetooth: L2CAP socket layer initialized
[ 2.302347] Bluetooth: SCO socket layer initialized
[ 2.302357] initcall bt_init+0x0/0xa5 [bluetooth] returned 0 after 15 usecs
[ 2.317839] calling alsa_sound_init+0x0/0x82 [snd] @ 297
[ 2.317849] initcall alsa_sound_init+0x0/0x82 [snd] returned 0 after 5 usecs
[ 2.318148] calling i915_init+0x0/0x59 [i915] @ 280
[ 2.318899] calling alsa_timer_init+0x0/0x1000 [snd_timer] @ 297
[ 2.318941] initcall alsa_timer_init+0x0/0x1000 [snd_timer] returned 0 after 37 usecs
[ 2.321107] calling alsa_pcm_init+0x0/0x1000 [snd_pcm] @ 297
[ 2.321112] initcall alsa_pcm_init+0x0/0x1000 [snd_pcm] returned 0 after 1 usecs
[ 2.321116] calling btusb_driver_init+0x0/0x1000 [btusb] @ 290
[ 2.321224] usbcore: registered new interface driver btusb
[ 2.321226] initcall btusb_driver_init+0x0/0x1000 [btusb] returned 0 after 104 usecs
[ 2.321454] bluetooth hci0: Direct firmware load for qca/rampatch_usb_00000302.bin failed with error -2
[ 2.321455] Bluetooth: hci0: failed to request rampatch file: qca/rampatch_usb_00000302.bin (-2)
[ 2.321718] calling alsa_hwdep_init+0x0/0x1000 [snd_hwdep] @ 297
[ 2.321723] initcall alsa_hwdep_init+0x0/0x1000 [snd_hwdep] returned 0 after 1 usecs
[ 2.323776] calling hda_bus_init+0x0/0x11 [snd_hda_core] @ 297
[ 2.323784] initcall hda_bus_init+0x0/0x11 [snd_hda_core] returned 0 after 4 usecs
[ 2.351447] calling azx_driver_init+0x0/0xfd8 [snd_hda_intel] @ 297
[ 2.353749] calling iTCO_vendor_init_module+0x0/0x1000 [iTCO_vendor_support] @ 282
[ 2.353749] iTCO_vendor_support: vendor-support=0
[ 2.353751] initcall iTCO_vendor_init_module+0x0/0x1000 [iTCO_vendor_support] returned 0 after 0 usecs
[ 2.354187] calling iTCO_wdt_init_module+0x0/0x1000 [iTCO_wdt] @ 282
[ 2.354187] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[ 2.354309] iTCO_wdt: Found a Intel PCH TCO device (Version=4, TCOBASE=0x0400)
[ 2.354392] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 2.354406] initcall iTCO_wdt_init_module+0x0/0x1000 [iTCO_wdt] returned 0 after 212 usecs
[ 2.368958] initcall proc_thermal_init+0x0/0x1000 [processor_thermal_device] returned 0 after 86478 usecs
[ 2.369004] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 2.369007] initcall shpcd_init+0x0/0x1000 [shpchp] returned 0 after 86180 usecs
[ 2.369561] initcall intel_pch_thermal_driver_init+0x0/0x1000 [intel_pch_thermal] returned 0 after 87107 usecs
[ 2.369569] mei_me 0000:00:16.0: enabling device (0000 -> 0002)
[ 2.383828] calling cfg80211_init+0x0/0xcb [cfg80211] @ 295
[ 2.383898] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[ 2.386205] intel-lpss 0000:00:15.0: enabling device (0000 -> 0002)
[ 2.386539] calling init_module+0x0/0xf10 [efivars] @ 300
[ 2.386540] EFI Variables Facility v0.08 2004-May-17
[ 2.394113] calling idma64_platform_driver_init+0x0/0x1000 [idma64] @ 327
[ 2.394129] initcall idma64_platform_driver_init+0x0/0x1000 [idma64] returned 0 after 13 usecs
[ 2.395836] calling serio_raw_drv_init+0x0/0x1000 [serio_raw] @ 292
[ 2.396147] initcall serio_raw_drv_init+0x0/0x1000 [serio_raw] returned 0 after 301 usecs
[ 2.397881] idma64 idma64.0: Found Intel integrated DMA 64-bit
[ 2.410425] calling pcspkr_platform_driver_init+0x0/0x1000 [pcspkr] @ 301
[ 2.410755] input: PC Speaker as /devices/platform/pcspkr/input/input11
[ 2.410776] initcall pcspkr_platform_driver_init+0x0/0x1000 [pcspkr] returned 0 after 340 usecs
[ 2.412209] intel-lpss 0000:00:15.1: enabling device (0000 -> 0002)
[ 2.416299] idma64 idma64.1: Found Intel integrated DMA 64-bit
[ 2.417010] calling joydev_init+0x0/0x1000 [joydev] @ 292
[ 2.417021] initcall joydev_init+0x0/0x1000 [joydev] returned 0 after 8 usecs
[ 2.417689] initcall init_module+0x0/0xf10 [efivars] returned 0 after 30416 usecs
[ 2.417745] calling evdev_init+0x0/0x1000 [evdev] @ 298
[ 2.417948] initcall intel_lpss_pci_driver_init+0x0/0x1000 [intel_lpss_pci] returned 0 after 127215 usecs
[ 2.418151] calling pcsp_init+0x0/0x1000 [snd_pcsp] @ 301
[ 2.418153] Error: Driver 'pcspkr' is already registered, aborting...
[ 2.418177] initcall pcsp_init+0x0/0x1000 [snd_pcsp] returned -16 after 23 usecs
[ 2.418257] calling efivars_pstore_init+0x0/0x1000 [efi_pstore] @ 300
[ 2.418258] pstore: using zlib compression
[ 2.418263] pstore: Registered efi as persistent store backend
[ 2.418265] initcall efivars_pstore_init+0x0/0x1000 [efi_pstore] returned 0 after 6 usecs
[ 2.418315] initcall evdev_init+0x0/0x1000 [evdev] returned 0 after 553 usecs
[ 2.419443] checking generic (50000000 1fb0000) vs hw (50000000 10000000)
[ 2.419444] fb: switching to inteldrmfb from EFI VGA
[ 2.419456] Console: switching to colour dummy device 80x25
[ 2.419516] [drm] Replacing VGA console driver
[ 2.429364] calling rapl_pmu_init+0x0/0x1000 [intel_rapl_perf] @ 293
[ 2.429504] RAPL PMU: API unit is 2^-32 Joules, 5 fixed counters, 655360 ms ovfl timer
[ 2.429504] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
[ 2.429505] RAPL PMU: hw unit of domain package 2^-14 Joules
[ 2.429505] RAPL PMU: hw unit of domain dram 2^-14 Joules
[ 2.429506] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
[ 2.429506] RAPL PMU: hw unit of domain psys 2^-14 Joules
[ 2.429508] initcall rapl_pmu_init+0x0/0x1000 [intel_rapl_perf] returned 0 after 138 usecs
[ 2.431163] calling intel_uncore_init+0x0/0xe7c [intel_uncore] @ 292
[ 2.431506] initcall intel_uncore_init+0x0/0xe7c [intel_uncore] returned 0 after 330 usecs
[ 2.432488] calling cstate_pmu_init+0x0/0xf3f [intel_cstate] @ 298
[ 2.432730] initcall cstate_pmu_init+0x0/0xf3f [intel_cstate] returned 0 after 232 usecs
[ 2.434092] calling cryptd_init+0x0/0x1000 [cryptd] @ 300
[ 2.434095] cryptd: max_cpu_qlen set to 1000
[ 2.434098] initcall cryptd_init+0x0/0x1000 [cryptd] returned 0 after 2 usecs
[ 2.435487] calling aes_init+0x0/0x1000 [aes_x86_64] @ 298
[ 2.435521] initcall aes_init+0x0/0x1000 [aes_x86_64] returned 0 after 30 usecs
[ 2.436504] calling aesni_init+0x0/0x201 [aesni_intel] @ 293
[ 2.436505] AVX2 version of gcm_enc/dec engaged.
[ 2.436506] AES CTR mode by8 optimization enabled
[ 2.441221] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[ 2.441245] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
[ 2.441246] cfg80211: failed to load regulatory.db
[ 2.441297] initcall cfg80211_init+0x0/0xcb [cfg80211] returned 0 after 56099 usecs
[ 2.442226] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 2.442227] [drm] Driver supports precise vblank timestamp query.
[ 2.450007] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 2.450038] i915 0000:00:02.0: Direct firmware load for i915/kbl_dmc_ver1_04.bin failed with error -2
[ 2.450040] i915 0000:00:02.0: Failed to load DMC firmware i915/kbl_dmc_ver1_04.bin. Disabling runtime power management.
[ 2.450041] i915 0000:00:02.0: DMC firmware homepage: https://01.org/linuxgraphics/downloads/firmware
[ 2.457003] [drm] Initialized i915 1.6.0 20171222 for 0000:00:02.0 on minor 0
[ 2.468462] calling crypto_pcbc_module_init+0x0/0x1000 [pcbc] @ 385
[ 2.468465] initcall crypto_pcbc_module_init+0x0/0x1000 [pcbc] returned 0 after 0 usecs
[ 2.468802] alg: No test for pcbc(aes) (pcbc-aes-aesni)
[ 2.468811] initcall aesni_init+0x0/0x201 [aesni_intel] returned 0 after 31544 usecs
[ 2.469172] calling init_fat_fs+0x0/0xfcb [fat] @ 383
[ 2.469215] initcall init_fat_fs+0x0/0xfcb [fat] returned 0 after 38 usecs
[ 2.469353] calling ghash_pclmulqdqni_mod_init+0x0/0x1000 [ghash_clmulni_intel] @ 293
[ 2.469699] calling init_vfat_fs+0x0/0x1000 [vfat] @ 383
[ 2.469702] initcall init_vfat_fs+0x0/0x1000 [vfat] returned 0 after 1 usecs
[ 2.472713] initcall ghash_pclmulqdqni_mod_init+0x0/0x1000 [ghash_clmulni_intel] returned 0 after 3277 usecs
[ 2.473071] calling crc32_pclmul_mod_init+0x0/0x1000 [crc32_pclmul] @ 292
[ 2.473109] initcall crc32_pclmul_mod_init+0x0/0x1000 [crc32_pclmul] returned 0 after 35 usecs
[ 2.473424] calling crct10dif_intel_mod_init+0x0/0x1000 [crct10dif_pclmul] @ 292
[ 2.473461] initcall crct10dif_intel_mod_init+0x0/0x1000 [crct10dif_pclmul] returned 0 after 33 usecs
[ 2.478432] calling init_nls_cp437+0x0/0x1000 [nls_cp437] @ 398
[ 2.478434] initcall init_nls_cp437+0x0/0x1000 [nls_cp437] returned 0 after 0 usecs
[ 2.480358] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 2.481308] calling init_nls_ascii+0x0/0x1000 [nls_ascii] @ 403
[ 2.481310] initcall init_nls_ascii+0x0/0x1000 [nls_ascii] returned 0 after 0 usecs
[ 2.481366] calling ieee80211_init+0x0/0x35 [mac80211] @ 295
[ 2.481386] initcall ieee80211_init+0x0/0x35 [mac80211] returned 0 after 4 usecs
[ 2.490748] random: crng init done
[ 2.491204] calling init_misc_binfmt+0x0/0x1000 [binfmt_misc] @ 414
[ 2.491208] initcall init_misc_binfmt+0x0/0x1000 [binfmt_misc] returned 0 after 1 usecs
[ 2.495916] calling vmx_init+0x0/0x511 [kvm_intel] @ 293
[ 2.496299] calling ath10k_pci_init+0x0/0x1000 [ath10k_pci] @ 295
[ 2.496584] ath10k_pci 0000:02:00.0: enabling device (0000 -> 0002)
[ 2.498756] ACPI: Battery Slot [BAT0] (battery present)
[ 2.498761] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input12
[ 2.498802] ath10k_pci 0000:02:00.0: pci irq msi oper_irq_mode 2 irq_mode 0 reset_mode 0
[ 2.499268] initcall i915_init+0x0/0x59 [i915] returned 0 after 176842 usecs
[ 2.499269] snd_hda_intel 0000:00:1f.3: enabling device (0000 -> 0002)
[ 2.499413] initcall azx_driver_init+0x0/0xfd8 [snd_hda_intel] returned 0 after 144491 usecs
[ 2.500374] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[ 2.501521] initcall vmx_init+0x0/0x511 [kvm_intel] returned 0 after 5462 usecs
[ 2.502632] calling coretemp_init+0x0/0x1000 [coretemp] @ 285
[ 2.505218] fbcon: inteldrmfb (fb0) is primary device
[ 2.505245] initcall coretemp_init+0x0/0x1000 [coretemp] returned 0 after 2546 usecs
[ 2.505948] calling powerclamp_init+0x0/0x1000 [intel_powerclamp] @ 285
[ 2.505978] initcall powerclamp_init+0x0/0x1000 [intel_powerclamp] returned 0 after 27 usecs
[ 2.506553] calling pkg_temp_thermal_init+0x0/0x1000 [x86_pkg_temp_thermal] @ 301
[ 2.508338] initcall pkg_temp_thermal_init+0x0/0x1000 [x86_pkg_temp_thermal] returned 0 after 1738 usecs
[ 2.508779] calling acpi_cpufreq_init+0x0/0x1000 [acpi_cpufreq] @ 285
[ 2.508782] initcall acpi_cpufreq_init+0x0/0x1000 [acpi_cpufreq] returned -17 after 0 usecs
[ 2.521745] calling generic_driver_init+0x0/0x1000 [snd_hda_codec_generic] @ 470
[ 2.521758] initcall generic_driver_init+0x0/0x1000 [snd_hda_codec_generic] returned 0 after 9 usecs
[ 2.522878] calling rapl_init+0x0/0x1000 [intel_rapl] @ 301
[ 2.522896] intel_rapl: Found RAPL domain package
[ 2.522897] intel_rapl: Found RAPL domain core
[ 2.522898] intel_rapl: Found RAPL domain uncore
[ 2.522899] intel_rapl: Found RAPL domain dram
[ 2.523346] initcall rapl_init+0x0/0x1000 [intel_rapl] returned 0 after 453 usecs
[ 2.523463] calling realtek_driver_init+0x0/0x1000 [snd_hda_codec_realtek] @ 470
[ 2.523871] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC3271: line_outs=1 (0x17/0x0/0x0/0x0/0x0) type:speaker
[ 2.523873] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 2.523875] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
[ 2.523876] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
[ 2.523877] snd_hda_codec_realtek hdaudioC0D0: inputs:
[ 2.523878] snd_hda_codec_realtek hdaudioC0D0: Headset Mic=0x19
[ 2.523879] snd_hda_codec_realtek hdaudioC0D0: Headphone Mic=0x1b
[ 2.523880] snd_hda_codec_realtek hdaudioC0D0: Internal Mic=0x12
[ 2.524839] initcall int3403_driver_init+0x0/0x1000 [int3403_thermal] returned 0 after 333972 usecs
[ 2.528768] audit: type=1400 audit(1520961161.323:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-senddoc" pid=482 comm="apparmor_parser"
[ 2.528908] audit: type=1400 audit(1520961161.327:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-oopslash" pid=481 comm="apparmor_parser"
[ 2.529125] audit: type=1400 audit(1520961161.327:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-xpdfimport" pid=484 comm="apparmor_parser"
[ 2.529226] audit: type=1400 audit(1520961161.327:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=479 comm="apparmor_parser"
[ 2.529227] audit: type=1400 audit(1520961161.327:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=479 comm="apparmor_parser"
[ 2.529228] audit: type=1400 audit(1520961161.327:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=479 comm="apparmor_parser"
[ 2.529793] audit: type=1400 audit(1520961161.327:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="virt-aa-helper" pid=485 comm="apparmor_parser"
[ 2.530253] audit: type=1400 audit(1520961161.327:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/libvirtd" pid=488 comm="apparmor_parser"
[ 2.530255] audit: type=1400 audit(1520961161.327:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/libvirtd//qemu_bridge_helper" pid=488 comm="apparmor_parser"
[ 2.553214] calling dell_smbios_init+0x0/0xf6f [dell_smbios] @ 487
[ 2.553216] calling i8k_init+0x0/0x1000 [dell_smm_hwmon] @ 286
[ 2.553220] initcall i8k_init+0x0/0x1000 [dell_smm_hwmon] returned -19 after 1 usecs
[ 2.553601] initcall dell_smbios_init+0x0/0xf6f [dell_smbios] returned 0 after 374 usecs
[ 2.554377] calling dell_init+0x0/0xc3f [dell_laptop] @ 487
[ 2.554413] dell_smbios: No dell-smbios drivers are loaded
[ 2.554415] dell_smbios: No dell-smbios drivers are loaded
[ 2.554415] dell_smbios: No dell-smbios drivers are loaded
[ 2.554415] dell_smbios: No dell-smbios drivers are loaded
[ 2.554428] dell_smbios: No dell-smbios drivers are loaded
[ 2.554429] dell_smbios: No dell-smbios drivers are loaded
[ 2.554429] dell_smbios: No dell-smbios drivers are loaded
[ 2.554435] initcall dell_init+0x0/0xc3f [dell_laptop] returned 0 after 54 usecs
[ 2.556757] calling dell_wmi_descriptor_driver_init+0x0/0x1000 [dell_wmi_descriptor] @ 290
[ 2.557234] calling wmi_bmof_driver_init+0x0/0x1000 [wmi_bmof] @ 281
[ 2.558948] initcall dell_wmi_descriptor_driver_init+0x0/0x1000 [dell_wmi_descriptor] returned 0 after 2137 usecs
[ 2.558966] initcall wmi_bmof_driver_init+0x0/0x1000 [wmi_bmof] returned 0 after 1689 usecs
[ 2.559427] calling dell_wmi_init+0x0/0xfee [dell_wmi] @ 285
[ 2.559496] input: Dell WMI hotkeys as /devices/platform/PNP0C14:01/wmi_bus/wmi_bus-PNP0C14:01/9DBB5994-A997-11DA-B012-B622A1EF5492/input/input13
[ 2.559542] initcall dell_wmi_init+0x0/0xfee [dell_wmi] returned 0 after 110 usecs
[ 2.570684] calling dw_i2c_init_driver+0x0/0x1000 [i2c_designware_platform] @ 294
[ 2.585908] dell_smbios: No dell-smbios drivers are loaded
[ 2.585910] leds dell::kbd_backlight: Setting an LED's brightness failed (-19)
[ 2.597394] initcall realtek_driver_init+0x0/0x1000 [snd_hda_codec_realtek] returned 0 after 72190 usecs
[ 2.629282] calling dcdbas_init+0x0/0x1000 [dcdbas] @ 286
[ 2.629341] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
[ 2.629354] initcall dcdbas_init+0x0/0x1000 [dcdbas] returned 0 after 67 usecs
[ 2.630813] calling hdmi_driver_init+0x0/0x1000 [snd_hda_codec_hdmi] @ 285
[ 2.631288] initcall ath10k_pci_init+0x0/0x1000 [ath10k_pci] returned 0 after 131820 usecs
[ 2.634510] initcall hdmi_driver_init+0x0/0x1000 [snd_hda_codec_hdmi] returned 0 after 3603 usecs
[ 2.635990] input: HDA Intel PCH Headphone Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input14
[ 2.636031] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input15
[ 2.636060] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input16
[ 2.636085] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input17
[ 2.636110] input: HDA Intel PCH HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input18
[ 2.636134] input: HDA Intel PCH HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input19
[ 2.734370] calling bnep_init+0x0/0x9b [bnep] @ 600
[ 2.734371] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 2.734372] Bluetooth: BNEP filters: protocol multicast
[ 2.734376] Bluetooth: BNEP socket layer initialized
[ 2.734379] initcall bnep_init+0x0/0x9b [bnep] returned 0 after 5 usecs
[ 2.777512] ath10k_pci 0000:02:00.0: Direct firmware load for ath10k/pre-cal-pci-0000:02:00.0.bin failed with error -2
[ 2.777520] ath10k_pci 0000:02:00.0: Direct firmware load for ath10k/cal-pci-0000:02:00.0.bin failed with error -2
[ 2.778371] ath10k_pci 0000:02:00.0: qca6174 hw3.2 target 0x05030000 chip_id 0x00340aff sub 1a56:143a
[ 2.778373] ath10k_pci 0000:02:00.0: kconfig debug 0 debugfs 0 tracing 0 dfs 0 testmode 0
[ 2.778893] ath10k_pci 0000:02:00.0: firmware ver WLAN.RM.4.4.1-00051-QCARMSWP-1 api 6 features wowlan,ignore-otp crc32 c3fd4411
[ 2.842696] ath10k_pci 0000:02:00.0: board_file api 2 bmi_id N/A crc32 20d869c3
[ 2.881545] initcall dw_i2c_init_driver+0x0/0x1000 [i2c_designware_platform] returned 0 after 303571 usecs
[ 2.884415] calling hid_generic_init+0x0/0x1000 [hid_generic] @ 283
[ 2.884932] input: ELAN24EE:00 04F3:24EE as /devices/pci0000:00/0000:00:15.0/i2c_designware.0/i2c-7/i2c-ELAN24EE:00/0018:04F3:24EE.0001/input/input20
[ 2.884987] hid-generic 0018:04F3:24EE.0001: input,hidraw0: I2C HID v1.00 Device [ELAN24EE:00 04F3:24EE] on i2c-ELAN24EE:00
[ 2.885361] input: DELL07E6:00 06CB:76AF as /devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-8/i2c-DELL07E6:00/0018:06CB:76AF.0002/input/input21
[ 2.885408] hid-generic 0018:06CB:76AF.0002: input,hidraw1: I2C HID v1.00 Mouse [DELL07E6:00 06CB:76AF] on i2c-DELL07E6:00
[ 2.885419] initcall hid_generic_init+0x0/0x1000 [hid_generic] returned 0 after 977 usecs
[ 2.886131] calling mt_driver_init+0x0/0x1000 [hid_multitouch] @ 283
[ 2.974209] calling iptable_filter_init+0x0/0x1000 [iptable_filter] @ 663
[ 2.974272] initcall iptable_filter_init+0x0/0x1000 [iptable_filter] returned 0 after 59 usecs
[ 2.980785] calling ip6_tables_init+0x0/0x1000 [ip6_tables] @ 665
[ 2.980794] initcall ip6_tables_init+0x0/0x1000 [ip6_tables] returned 0 after 6 usecs
[ 2.981738] calling ip6table_filter_init+0x0/0x1000 [ip6table_filter] @ 666
[ 2.981801] initcall ip6table_filter_init+0x0/0x1000 [ip6table_filter] returned 0 after 58 usecs
[ 2.992097] calling ebtables_init+0x0/0x1000 [ebtables] @ 668
[ 2.992099] initcall ebtables_init+0x0/0x1000 [ebtables] returned 0 after 0 usecs
[ 2.992964] calling ebtable_filter_init+0x0/0x1000 [ebtable_filter] @ 669
[ 2.992977] initcall ebtable_filter_init+0x0/0x1000 [ebtable_filter] returned 0 after 10 usecs
[ 3.000440] input: ELAN24EE:00 04F3:24EE as /devices/pci0000:00/0000:00:15.0/i2c_designware.0/i2c-7/i2c-ELAN24EE:00/0018:04F3:24EE.0001/input/input22
[ 3.000531] hid-multitouch 0018:04F3:24EE.0001: input,hidraw0: I2C HID v1.00 Device [ELAN24EE:00 04F3:24EE] on i2c-ELAN24EE:00
[ 3.008613] input: DELL07E6:00 06CB:76AF Touchpad as /devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-8/i2c-DELL07E6:00/0018:06CB:76AF.0002/input/input28
[ 3.008707] hid-multitouch 0018:06CB:76AF.0002: input,hidraw1: I2C HID v1.00 Mouse [DELL07E6:00 06CB:76AF] on i2c-DELL07E6:00
[ 3.009101] initcall mt_driver_init+0x0/0x1000 [hid_multitouch] returned 0 after 120083 usecs
[ 3.028420] calling devlink_module_init+0x0/0xedb [devlink] @ 674
[ 3.028431] initcall devlink_module_init+0x0/0xedb [devlink] returned 0 after 8 usecs
[ 3.418571] ath10k_pci 0000:02:00.0: Unknown eventid: 118809
[ 3.421558] ath10k_pci 0000:02:00.0: Unknown eventid: 90118
[ 3.422119] ath10k_pci 0000:02:00.0: htt-ver 3.44 wmi-op 4 htt-op 3 cal otp max-sta 32 raw 0 hwcrypto 1
[ 3.502515] ath: EEPROM regdomain: 0x6c
[ 3.502516] ath: EEPROM indicates we should expect a direct regpair map
[ 3.502519] ath: Country alpha2 being used: 00
[ 3.502520] ath: Regpair used: 0x6c
[ 3.505526] calling arc4_init+0x0/0x1000 [arc4] @ 713
[ 3.505928] initcall arc4_init+0x0/0x1000 [arc4] returned 0 after 383 usecs
[ 3.509901] ath10k_pci 0000:02:00.0 wlp2s0: renamed from wlan0
[ 3.568716] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[ 3.621582] Console: switching to colour frame buffer device 480x135
[ 3.651502] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 3.885096] dell_smbios: No dell-smbios drivers are loaded
[ 3.885099] dell_smbios: No dell-smbios drivers are loaded
[ 3.885100] dell_smbios: No dell-smbios drivers are loaded
[ 4.315907] ath10k_pci 0000:02:00.0: Unknown eventid: 118809
[ 4.318948] ath10k_pci 0000:02:00.0: Unknown eventid: 90118
[ 4.337356] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[ 5.163308] ath10k_pci 0000:02:00.0: Unknown eventid: 118809
[ 5.166304] ath10k_pci 0000:02:00.0: Unknown eventid: 90118
[ 5.178900] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[ 5.241296] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[ 5.697934] dell_smbios: No dell-smbios drivers are loaded
[ 5.697938] dell_smbios: No dell-smbios drivers are loaded
[ 5.697939] dell_smbios: No dell-smbios drivers are loaded
[ 8.947151] calling fuse_init+0x0/0x1a8 [fuse] @ 1027
[ 8.947155] fuse init (API version 7.26)
[ 8.947387] initcall fuse_init+0x0/0x1a8 [fuse] returned 0 after 215 usecs
[ 10.105202] rfkill: input handler disabled
[ 10.111732] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[ 10.548425] dell_smbios: No dell-smbios drivers are loaded
[ 10.548429] dell_smbios: No dell-smbios drivers are loaded
[ 10.548430] dell_smbios: No dell-smbios drivers are loaded
[ 15.005521] wlp2s0: authenticate with 6c:f3:7f:10:ae:18
[ 15.051896] wlp2s0: send auth to 6c:f3:7f:10:ae:18 (try 1/3)
[ 15.054544] wlp2s0: authenticated
[ 15.056490] wlp2s0: associate with 6c:f3:7f:10:ae:18 (try 1/3)
[ 15.071469] wlp2s0: RX AssocResp from 6c:f3:7f:10:ae:18 (capab=0x411 status=0 aid=1)
[ 15.073749] wlp2s0: associated
[ 20.151213] calling crypto_ccm_module_init+0x0/0x1000 [ccm] @ 1626
[ 20.151225] initcall crypto_ccm_module_init+0x0/0x1000 [ccm] returned 0 after 2 usecs
[ 20.163181] calling crypto_ctr_module_init+0x0/0x1000 [ctr] @ 1635
[ 20.163193] initcall crypto_ctr_module_init+0x0/0x1000 [ctr] returned 0 after 2 usecs
[ 20.165676] IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0: link becomes ready
[ 4227.914777] wlp2s0: deauthenticating from 6c:f3:7f:10:ae:18 by local choice (Reason: 3=DEAUTH_LEAVING)
[ 4227.930918] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[ 4227.995200] PM: suspend entry (s2idle)
[ 4227.995201] PM: Syncing filesystems ... done.
[ 4228.001909] Freezing user space processes ... (elapsed 0.080 seconds) done.
[ 4228.082292] OOM killer disabled.
[ 4228.082294] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[ 4228.084066] Suspending console(s) (use no_console_suspend to debug)
[ 4228.084803] calling rfkill1+ @ 3140, parent: phy0
[ 4228.084808] call rfkill1+ returned 0 after 1 usecs
[ 4228.084825] calling input28+ @ 3140, parent: 0018:06CB:76AF.0002
[ 4228.084828] call input28+ returned 0 after 1 usecs
[ 4228.084836] calling input22+ @ 3140, parent: 0018:04F3:24EE.0001
[ 4228.084838] call input22+ returned 0 after 0 usecs
[ 4228.084883] calling phy0+ @ 3061, parent: 0000:02:00.0
[ 4228.084893] call phy0+ returned 0 after 6 usecs
[ 4228.084904] calling i2c-DELL07E6:00+ @ 3061, parent: i2c-8
[ 4228.087199] call i2c-DELL07E6:00+ returned 0 after 2233 usecs
[ 4228.087337] calling i2c-ELAN24EE:00+ @ 3061, parent: i2c-7
[ 4228.088915] call i2c-ELAN24EE:00+ returned 0 after 1531 usecs
[ 4228.088990] calling input19+ @ 3140, parent: card0
[ 4228.088994] call input19+ returned 0 after 0 usecs
[ 4228.089000] calling input18+ @ 3140, parent: card0
[ 4228.089002] call input18+ returned 0 after 0 usecs
[ 4228.089007] calling input17+ @ 3140, parent: card0
[ 4228.089009] call input17+ returned 0 after 0 usecs
[ 4228.089014] calling input16+ @ 3140, parent: card0
[ 4228.089016] call input16+ returned 0 after 0 usecs
[ 4228.089020] calling input15+ @ 3140, parent: card0
[ 4228.089022] call input15+ returned 0 after 0 usecs
[ 4228.089027] calling input14+ @ 3140, parent: card0
[ 4228.089029] call input14+ returned 0 after 0 usecs
[ 4228.089050] calling dcdbas+ @ 3140, parent: platform
[ 4228.089053] call dcdbas+ returned 0 after 1 usecs
[ 4228.089069] calling input13+ @ 3140, parent: 9DBB5994-A997-11DA-B012-B622A1EF5492
[ 4228.089071] call input13+ returned 0 after 0 usecs
[ 4228.089076] calling dell::kbd_backlight+ @ 3140, parent: dell-laptop
[ 4228.089079] call dell::kbd_backlight+ returned 0 after 0 usecs
[ 4228.089083] calling dell-laptop+ @ 3140, parent: platform
[ 4228.089085] call dell-laptop+ returned 0 after 0 usecs
[ 4228.089089] calling dell-smbios.0+ @ 3140, parent: platform
[ 4228.089091] call dell-smbios.0+ returned 0 after 0 usecs
[ 4228.089114] calling coretemp.0+ @ 3140, parent: platform
[ 4228.089117] call coretemp.0+ returned 0 after 0 usecs
[ 4228.089122] calling hdaudioC0D2+ @ 3061, parent: 0000:00:1f.3
[ 4228.089126] calling input12+ @ 3140, parent: LNXVIDEO:00
[ 4228.089129] call hdaudioC0D2+ returned 0 after 0 usecs
[ 4228.089132] call input12+ returned 0 after 0 usecs
[ 4228.089135] calling hdaudioC0D0+ @ 3018, parent: 0000:00:1f.3
[ 4228.089147] calling intel_backlight+ @ 3140, parent: card0-eDP-1
[ 4228.089150] call intel_backlight+ returned 0 after 0 usecs
[ 4228.089194] calling i2c_designware.1+ @ 3140, parent: 0000:00:15.1
[ 4228.089198] call i2c_designware.1+ returned 0 after 0 usecs
[ 4228.089207] calling idma64.1+ @ 3140, parent: 0000:00:15.1
[ 4228.089214] call idma64.1+ returned 0 after 4 usecs
[ 4228.089219] calling input11+ @ 3140, parent: pcspkr
[ 4228.089222] call input11+ returned 0 after 0 usecs
[ 4228.089227] calling i2c_designware.0+ @ 3140, parent: 0000:00:15.0
[ 4228.089229] call i2c_designware.0+ returned 0 after 0 usecs
[ 4228.089237] calling idma64.0+ @ 3140, parent: 0000:00:15.0
[ 4228.089243] call idma64.0+ returned 0 after 3 usecs
[ 4228.089273] calling regulatory.0+ @ 3140, parent: platform
[ 4228.089276] call regulatory.0+ returned 0 after 0 usecs
[ 4228.089291] calling rfkill0+ @ 3140, parent: hci0
[ 4228.089294] call rfkill0+ returned 0 after 0 usecs
[ 4228.089301] calling input10+ @ 3140, parent: 1-5:1.2
[ 4228.089304] call input10+ returned 0 after 0 usecs
[ 4228.089313] calling input9+ @ 3140, parent: 1-5:1.0
[ 4228.089316] call input9+ returned 0 after 0 usecs
[ 4228.089344] calling input8+ @ 3140, parent: LNXPWRBN:00
[ 4228.089346] call input8+ returned 0 after 0 usecs
[ 4228.089351] calling input7+ @ 3140, parent: PNP0C0E:00
[ 4228.089353] call input7+ returned 0 after 0 usecs
[ 4228.089357] calling input6+ @ 3140, parent: PNP0C0C:00
[ 4228.089360] call input6+ returned 0 after 0 usecs
[ 4228.089363] calling input5+ @ 3140, parent: PNP0C0D:00
[ 4228.089366] call input5+ returned 0 after 0 usecs
[ 4228.089373] calling input4+ @ 3140, parent: INT33D5:00
[ 4228.089376] call input4+ returned 0 after 0 usecs
[ 4228.089380] calling input3+ @ 3140, parent: INT33D5:00
[ 4228.089383] call input3+ returned 0 after 0 usecs
[ 4228.089390] calling input2+ @ 3140, parent: serio1
[ 4228.089392] call input2+ returned 0 after 0 usecs
[ 4228.089476] calling 1-7+ @ 3061, parent: usb1
[ 4228.089484] calling iTCO_wdt+ @ 3140, parent: 0000:00:1f.4
[ 4228.089487] call iTCO_wdt+ returned 0 after 0 usecs
[ 4228.089497] call 1-7+ returned 0 after 16 usecs
[ 4228.089502] calling microcode+ @ 3140, parent: platform
[ 4228.089504] call microcode+ returned 0 after 0 usecs
[ 4228.089522] calling 1-5+ @ 3061, parent: usb1
[ 4228.089525] calling efivars.0+ @ 3140, parent: platform
[ 4228.089527] call 1-5+ returned 0 after 0 usecs
[ 4228.089529] call efivars.0+ returned 0 after 0 usecs
[ 4228.089534] calling input0::scrolllock+ @ 3140, parent: input0
[ 4228.089537] call input0::scrolllock+ returned 0 after 0 usecs
[ 4228.089540] calling input0::capslock+ @ 3140, parent: input0
[ 4228.089543] call input0::capslock+ returned 0 after 0 usecs
[ 4228.089547] calling input0::numlock+ @ 3140, parent: input0
[ 4228.089549] call input0::numlock+ returned 0 after 0 usecs
[ 4228.089554] calling input0+ @ 3140, parent: serio0
[ 4228.089557] call input0+ returned 0 after 1 usecs
[ 4228.089560] calling usb2+ @ 3061, parent: 0000:00:14.0
[ 4228.089562] calling rtc0+ @ 3140, parent: 00:01
[ 4228.089566] call rtc0+ returned 0 after 0 usecs
[ 4228.089572] calling serio1+ @ 3140, parent: i8042
[ 4228.089723] calling usb1+ @ 3114, parent: 0000:00:14.0
[ 4228.089914] call usb1+ returned 0 after 180 usecs
[ 4228.089938] call usb2+ returned 0 after 364 usecs
[ 4228.109315] call hdaudioC0D0+ returned 0 after 19700 usecs
[ 4228.292820] psmouse serio1: Failed to disable mouse on isa0060/serio1
[ 4229.100814] call serio1+ returned 0 after 987530 usecs
[ 4229.100824] calling serio0+ @ 3140, parent: i8042
[ 4229.100993] call serio0+ returned 0 after 161 usecs
[ 4229.101000] calling i8042+ @ 3140, parent: platform
[ 4229.101003] call i8042+ returned 0 after 1 usecs
[ 4229.101063] calling serial8250+ @ 3140, parent: platform
[ 4229.101067] call serial8250+ returned 0 after 1 usecs
[ 4229.101095] calling alarmtimer+ @ 3140, parent: platform
[ 4229.101098] call alarmtimer+ returned 0 after 1 usecs
[ 4229.101105] calling efi-framebuffer.0+ @ 3140, parent: platform
[ 4229.101107] call efi-framebuffer.0+ returned 0 after 0 usecs
[ 4229.101111] calling pcspkr+ @ 3140, parent: platform
[ 4229.101440] call pcspkr+ returned 0 after 319 usecs
[ 4229.101516] calling 00:08+ @ 3140, parent: pnp0
[ 4229.101519] call 00:08+ returned 0 after 1 usecs
[ 4229.101522] calling 00:07+ @ 3140, parent: pnp0
[ 4229.101524] call 00:07+ returned 0 after 0 usecs
[ 4229.101527] calling 00:06+ @ 3140, parent: pnp0
[ 4229.101529] call 00:06+ returned 0 after 0 usecs
[ 4229.101532] calling 00:05+ @ 3140, parent: pnp0
[ 4229.101534] call 00:05+ returned 0 after 0 usecs
[ 4229.101536] calling 00:04+ @ 3140, parent: pnp0
[ 4229.101538] call 00:04+ returned 0 after 0 usecs
[ 4229.101541] calling 00:03+ @ 3140, parent: pnp0
[ 4229.101543] call 00:03+ returned 0 after 0 usecs
[ 4229.101545] calling 00:02+ @ 3140, parent: pnp0
[ 4229.101547] call 00:02+ returned 0 after 0 usecs
[ 4229.101551] calling 00:01+ @ 3140, parent: pnp0
[ 4229.101616] call 00:01+ returned 0 after 61 usecs
[ 4229.101619] calling 00:00+ @ 3140, parent: pnp0
[ 4229.101621] call 00:00+ returned 0 after 0 usecs
[ 4229.101632] calling LNXPWRBN:00+ @ 3140, parent: LNXSYSTM:00
[ 4229.101634] call LNXPWRBN:00+ returned 0 after 0 usecs
[ 4229.101637] calling INT3400:00+ @ 3140, parent: platform
[ 4229.101640] call INT3400:00+ returned 0 after 0 usecs
[ 4229.101642] calling USBC000:00+ @ 3140, parent: platform
[ 4229.101644] call USBC000:00+ returned 0 after 0 usecs
[ 4229.101648] calling INT33D5:00+ @ 3140, parent: platform
[ 4229.101651] call INT33D5:00+ returned 0 after 0 usecs
[ 4229.101653] calling PNP0C0A:00+ @ 3140, parent: platform
[ 4229.101655] call PNP0C0A:00+ returned 0 after 0 usecs
[ 4229.101658] calling ACPI0003:00+ @ 3140, parent: platform
[ 4229.101660] call ACPI0003:00+ returned 0 after 0 usecs
[ 4229.101663] calling PNP0C0E:00+ @ 3140, parent: platform
[ 4229.101665] call PNP0C0E:00+ returned 0 after 0 usecs
[ 4229.101667] calling PNP0C0C:00+ @ 3140, parent: platform
[ 4229.101669] call PNP0C0C:00+ returned 0 after 0 usecs
[ 4229.101672] calling PNP0C0D:00+ @ 3140, parent: platform
[ 4229.101674] call PNP0C0D:00+ returned 0 after 0 usecs
[ 4229.101677] calling PNP0C14:01+ @ 3140, parent: platform
[ 4229.101679] call PNP0C14:01+ returned 0 after 0 usecs
[ 4229.101681] calling INT33A1:00+ @ 3140, parent: platform
[ 4229.101683] call INT33A1:00+ returned 0 after 0 usecs
[ 4229.101686] calling PNP0C14:00+ @ 3140, parent: platform
[ 4229.101688] call PNP0C14:00+ returned 0 after 0 usecs
[ 4229.101691] calling INT0E0C:00+ @ 3140, parent: platform
[ 4229.101693] call INT0E0C:00+ returned 0 after 0 usecs
[ 4229.101695] calling ACPI000C:00+ @ 3140, parent: platform
[ 4229.101697] call ACPI000C:00+ returned 0 after 0 usecs
[ 4229.101700] calling INT3403:05+ @ 3140, parent: pci0000:00
[ 4229.101702] call INT3403:05+ returned 0 after 0 usecs
[ 4229.101708] calling INT344B:00+ @ 3140, parent: pci0000:00
[ 4229.101710] call INT344B:00+ returned 0 after 0 usecs
[ 4229.101713] calling INT3403:04+ @ 3140, parent: PNP0C09:00
[ 4229.101714] call INT3403:04+ returned 0 after 0 usecs
[ 4229.101717] calling INT3403:03+ @ 3140, parent: PNP0C09:00
[ 4229.101719] call INT3403:03+ returned 0 after 0 usecs
[ 4229.101722] calling INT3403:02+ @ 3140, parent: PNP0C09:00
[ 4229.101723] call INT3403:02+ returned 0 after 0 usecs
[ 4229.101726] calling INT3403:01+ @ 3140, parent: PNP0C09:00
[ 4229.101728] call INT3403:01+ returned 0 after 0 usecs
[ 4229.101730] calling INT3403:00+ @ 3140, parent: PNP0C09:00
[ 4229.101732] call INT3403:00+ returned 0 after 0 usecs
[ 4229.101736] calling PNP0C09:00+ @ 3140, parent: 0000:00:1f.0
[ 4229.101737] call PNP0C09:00+ returned 0 after 0 usecs
[ 4229.101740] calling PNP0103:00+ @ 3140, parent: 0000:00:1f.0
[ 4229.101742] call PNP0103:00+ returned 0 after 0 usecs
[ 4229.101745] calling INT0800:00+ @ 3140, parent: 0000:00:1f.0
[ 4229.101747] call INT0800:00+ returned 0 after 0 usecs
[ 4229.101779] calling 0000:6e:00.0+ @ 3018, parent: 0000:00:1d.0
[ 4229.101792] calling 0000:02:00.0+ @ 3061, parent: 0000:00:1c.2
[ 4229.101798] call 0000:02:00.0+ returned 0 after 2 usecs
[ 4229.102040] calling LNXTHERM:00+ @ 3140, parent: LNXSYBUS:01
[ 4229.102043] calling 0000:01:00.0+ @ 3061, parent: 0000:00:1c.0
[ 4229.102047] calling 0000:00:1f.4+ @ 3114, parent: pci0000:00
[ 4229.102052] calling 0000:00:1f.3+ @ 3148, parent: pci0000:00
[ 4229.102055] calling 0000:00:1f.2+ @ 3147, parent: pci0000:00
[ 4229.102057] call LNXTHERM:00+ returned 0 after 3 usecs
[ 4229.102059] call 0000:01:00.0+ returned 0 after 0 usecs
[ 4229.102062] call 0000:00:1f.2+ returned 0 after 0 usecs
[ 4229.102066] calling 0000:00:1f.0+ @ 3061, parent: pci0000:00
[ 4229.102068] call 0000:00:1f.0+ returned 0 after 0 usecs
[ 4229.102074] calling 0000:00:1c.4+ @ 3061, parent: pci0000:00
[ 4229.102076] calling PNP0C0E:00+ @ 3140, parent: LNXSYBUS:00
[ 4229.102078] call 0000:00:1c.4+ returned 0 after 1 usecs
[ 4229.102080] call PNP0C0E:00+ returned 0 after 0 usecs
[ 4229.102083] calling 0000:00:1c.2+ @ 3061, parent: pci0000:00
[ 4229.102085] calling PNP0C0C:00+ @ 3140, parent: LNXSYBUS:00
[ 4229.102087] call 0000:00:1c.2+ returned 0 after 0 usecs
[ 4229.102088] call PNP0C0C:00+ returned 0 after 0 usecs
[ 4229.102091] calling 0000:00:1c.0+ @ 3061, parent: pci0000:00
[ 4229.102093] calling PNP0C0D:00+ @ 3140, parent: LNXSYBUS:00
[ 4229.102094] call 0000:00:1c.0+ returned 0 after 0 usecs
[ 4229.102096] call PNP0C0D:00+ returned 0 after 0 usecs
[ 4229.102104] calling 0000:00:16.0+ @ 3061, parent: pci0000:00
[ 4229.102146] call 0000:00:1f.4+ returned 0 after 92 usecs
[ 4229.102148] calling 0000:00:15.1+ @ 3149, parent: pci0000:00
[ 4229.102152] call 0000:00:15.1+ returned 0 after 1 usecs
[ 4229.102154] calling 0000:00:15.0+ @ 3114, parent: pci0000:00
[ 4229.102157] calling 0000:00:14.2+ @ 3149, parent: pci0000:00
[ 4229.102159] call 0000:00:15.0+ returned 0 after 0 usecs
[ 4229.102161] call 0000:00:14.2+ returned 0 after 1 usecs
[ 4229.102166] calling 0000:00:14.0+ @ 3114, parent: pci0000:00
[ 4229.102167] calling 0000:00:04.0+ @ 3149, parent: pci0000:00
[ 4229.102174] call 0000:00:04.0+ returned 0 after 4 usecs
[ 4229.102180] calling 0000:00:02.0+ @ 3149, parent: pci0000:00
[ 4229.102252] calling 0000:00:00.0+ @ 3150, parent: pci0000:00
[ 4229.102256] call 0000:00:00.0+ returned 0 after 0 usecs
[ 4229.102284] call 0000:00:14.0+ returned 0 after 113 usecs
[ 4229.102291] calling PNP0C09:00+ @ 3140, parent: device:11
[ 4229.102295] call PNP0C09:00+ returned 0 after 0 usecs
[ 4229.103270] call 0000:00:1f.3+ returned 0 after 1184 usecs
[ 4229.103802] call 0000:00:02.0+ returned 0 after 1579 usecs
[ 4229.114329] call 0000:00:16.0+ returned 0 after 11932 usecs
[ 4229.225316] call 0000:6e:00.0+ returned 0 after 120634 usecs
[ 4229.225343] calling 0000:00:1d.0+ @ 3147, parent: pci0000:00
[ 4229.225350] call 0000:00:1d.0+ returned 0 after 3 usecs
[ 4229.225564] calling i2c-DELL07E6:00+ @ 3150, parent: i2c-8
[ 4229.225569] call i2c-DELL07E6:00+ returned 0 after 1 usecs
[ 4229.225698] calling i2c-ELAN24EE:00+ @ 3147, parent: i2c-7
[ 4229.225703] call i2c-ELAN24EE:00+ returned 0 after 1 usecs
[ 4229.225874] calling i2c_designware.1+ @ 3140, parent: 0000:00:15.1
[ 4229.225884] call i2c_designware.1+ returned 0 after 6 usecs
[ 4229.225896] calling i2c_designware.0+ @ 3140, parent: 0000:00:15.0
[ 4229.225902] call i2c_designware.0+ returned 0 after 3 usecs
[ 4229.226234] calling INT3400:00+ @ 3140, parent: platform
[ 4229.226238] call INT3400:00+ returned 0 after 1 usecs
[ 4229.226242] calling INT33D5:00+ @ 3140, parent: platform
[ 4229.226245] call INT33D5:00+ returned 0 after 0 usecs
[ 4229.226253] calling PNP0C14:01+ @ 3140, parent: platform
[ 4229.226255] call PNP0C14:01+ returned 0 after 0 usecs
[ 4229.226259] calling PNP0C14:00+ @ 3140, parent: platform
[ 4229.226261] call PNP0C14:00+ returned 0 after 0 usecs
[ 4229.226266] calling INT3403:05+ @ 3140, parent: pci0000:00
[ 4229.226268] call INT3403:05+ returned 0 after 0 usecs
[ 4229.226273] calling INT344B:00+ @ 3140, parent: pci0000:00
[ 4229.228713] call INT344B:00+ returned 0 after 2380 usecs
[ 4229.228716] calling INT3403:04+ @ 3140, parent: PNP0C09:00
[ 4229.228718] call INT3403:04+ returned 0 after 0 usecs
[ 4229.228721] calling INT3403:03+ @ 3140, parent: PNP0C09:00
[ 4229.228723] call INT3403:03+ returned 0 after 0 usecs
[ 4229.228726] calling INT3403:02+ @ 3140, parent: PNP0C09:00
[ 4229.228728] call INT3403:02+ returned 0 after 0 usecs
[ 4229.228761] calling INT3403:01+ @ 3140, parent: PNP0C09:00
[ 4229.228764] call INT3403:01+ returned 0 after 0 usecs
[ 4229.228767] calling INT3403:00+ @ 3140, parent: PNP0C09:00
[ 4229.228769] call INT3403:00+ returned 0 after 0 usecs
[ 4229.228806] calling 0000:6e:00.0+ @ 3147, parent: 0000:00:1d.0
[ 4229.228813] call 0000:6e:00.0+ returned 0 after 2 usecs
[ 4229.228823] calling 0000:02:00.0+ @ 3147, parent: 0000:00:1c.2
[ 4229.228827] call 0000:02:00.0+ returned 0 after 0 usecs
[ 4229.228834] calling 0000:01:00.0+ @ 3147, parent: 0000:00:1c.0
[ 4229.228837] call 0000:01:00.0+ returned 0 after 0 usecs
[ 4229.228844] calling 0000:00:1f.4+ @ 3147, parent: pci0000:00
[ 4229.228848] call 0000:00:1f.4+ returned 0 after 0 usecs
[ 4229.228862] calling 0000:00:1f.2+ @ 3147, parent: pci0000:00
[ 4229.228867] calling 0000:00:1f.3+ @ 3150, parent: pci0000:00
[ 4229.228869] call 0000:00:1f.2+ returned 0 after 0 usecs
[ 4229.228875] call 0000:00:1f.3+ returned 0 after 2 usecs
[ 4229.228879] calling 0000:00:1f.0+ @ 3061, parent: pci0000:00
[ 4229.228882] calling 0000:00:1d.0+ @ 3147, parent: pci0000:00
[ 4229.228885] call 0000:00:1f.0+ returned 0 after 0 usecs
[ 4229.228887] call 0000:00:1d.0+ returned 0 after 0 usecs
[ 4229.228891] calling 0000:00:1c.4+ @ 3018, parent: pci0000:00
[ 4229.228893] calling 0000:00:1c.2+ @ 3150, parent: pci0000:00
[ 4229.228896] calling 0000:00:1c.0+ @ 3061, parent: pci0000:00
[ 4229.228898] call 0000:00:1c.4+ returned 0 after 0 usecs
[ 4229.228900] calling 0000:00:16.0+ @ 3147, parent: pci0000:00
[ 4229.228903] call 0000:00:1c.2+ returned 0 after 0 usecs
[ 4229.228905] call 0000:00:1c.0+ returned 0 after 0 usecs
[ 4229.228908] call 0000:00:16.0+ returned 0 after 0 usecs
[ 4229.228911] calling 0000:00:15.0+ @ 3018, parent: pci0000:00
[ 4229.228914] calling 0000:00:14.2+ @ 3150, parent: pci0000:00
[ 4229.228918] calling 0000:00:15.1+ @ 3149, parent: pci0000:00
[ 4229.228921] calling 0000:00:14.0+ @ 3061, parent: pci0000:00
[ 4229.228923] calling 0000:00:04.0+ @ 3147, parent: pci0000:00
[ 4229.228926] call 0000:00:14.2+ returned 0 after 0 usecs
[ 4229.228928] call 0000:00:14.0+ returned 0 after 0 usecs
[ 4229.228930] call 0000:00:04.0+ returned 0 after 0 usecs
[ 4229.228934] calling 0000:00:00.0+ @ 3150, parent: pci0000:00
[ 4229.228939] calling 0000:00:02.0+ @ 3148, parent: pci0000:00
[ 4229.228941] call 0000:00:00.0+ returned 0 after 0 usecs
[ 4229.229043] call 0000:00:15.0+ returned 0 after 125 usecs
[ 4229.229053] call 0000:00:15.1+ returned 0 after 127 usecs
[ 4229.248927] call 0000:00:02.0+ returned 0 after 19510 usecs
[ 4229.287136] calling i2c-DELL07E6:00+ @ 3148, parent: i2c-8
[ 4229.287142] call i2c-DELL07E6:00+ returned 0 after 1 usecs
[ 4229.287182] calling i2c-ELAN24EE:00+ @ 3061, parent: i2c-7
[ 4229.287187] call i2c-ELAN24EE:00+ returned 0 after 0 usecs
[ 4229.287613] calling iTCO_wdt+ @ 3140, parent: 0000:00:1f.4
[ 4229.287617] call iTCO_wdt+ returned 0 after 0 usecs
[ 4229.287819] calling INT3400:00+ @ 3140, parent: platform
[ 4229.287822] call INT3400:00+ returned 0 after 0 usecs
[ 4229.287828] calling INT33D5:00+ @ 3140, parent: platform
[ 4229.287830] call INT33D5:00+ returned 0 after 0 usecs
[ 4229.287838] calling PNP0C14:01+ @ 3140, parent: platform
[ 4229.287841] call PNP0C14:01+ returned 0 after 0 usecs
[ 4229.287844] calling PNP0C14:00+ @ 3140, parent: platform
[ 4229.287846] call PNP0C14:00+ returned 0 after 0 usecs
[ 4229.287852] calling INT3403:05+ @ 3140, parent: pci0000:00
[ 4229.287854] call INT3403:05+ returned 0 after 0 usecs
[ 4229.287860] calling INT344B:00+ @ 3140, parent: pci0000:00
[ 4229.287862] call INT344B:00+ returned 0 after 0 usecs
[ 4229.287865] calling INT3403:04+ @ 3140, parent: PNP0C09:00
[ 4229.287867] call INT3403:04+ returned 0 after 0 usecs
[ 4229.287870] calling INT3403:03+ @ 3140, parent: PNP0C09:00
[ 4229.287872] call INT3403:03+ returned 0 after 0 usecs
[ 4229.287874] calling INT3403:02+ @ 3140, parent: PNP0C09:00
[ 4229.287877] call INT3403:02+ returned 0 after 0 usecs
[ 4229.287879] calling INT3403:01+ @ 3140, parent: PNP0C09:00
[ 4229.287881] call INT3403:01+ returned 0 after 0 usecs
[ 4229.287884] calling INT3403:00+ @ 3140, parent: PNP0C09:00
[ 4229.287886] call INT3403:00+ returned 0 after 0 usecs
[ 4229.287910] calling 0000:6e:00.0+ @ 3061, parent: 0000:00:1d.0
[ 4229.287918] calling 0000:02:00.0+ @ 3148, parent: 0000:00:1c.2
[ 4229.287929] calling 0000:01:00.0+ @ 3150, parent: 0000:00:1c.0
[ 4229.287941] calling 0000:00:1f.4+ @ 3152, parent: pci0000:00
[ 4229.287949] calling 0000:00:1f.3+ @ 3018, parent: pci0000:00
[ 4229.287961] calling 0000:00:1f.2+ @ 3149, parent: pci0000:00
[ 4229.288122] calling 0000:00:1f.0+ @ 3147, parent: pci0000:00
[ 4229.288165] calling PNP0C09:00+ @ 3140, parent: device:11
[ 4229.288168] call PNP0C09:00+ returned 0 after 0 usecs
[ 4229.289086] calling 0000:00:1c.4+ @ 3114, parent: pci0000:00
[ 4229.291347] call 0000:00:1f.4+ returned 0 after 3321 usecs
[ 4229.291350] call 0000:00:1f.2+ returned 0 after 3303 usecs
[ 4229.291690] call 0000:00:1f.0+ returned 0 after 3481 usecs
[ 4229.291830] calling 0000:00:16.0+ @ 3147, parent: pci0000:00
[ 4229.293063] call 0000:01:00.0+ returned 0 after 5009 usecs
[ 4229.293078] calling 0000:00:1c.0+ @ 3152, parent: pci0000:00
[ 4229.293084] calling 0000:00:15.1+ @ 3150, parent: pci0000:00
[ 4229.293663] call 0000:00:1c.4+ returned 0 after 4466 usecs
[ 4229.293673] calling 0000:00:15.0+ @ 3114, parent: pci0000:00
[ 4229.293868] calling 0000:00:14.2+ @ 3153, parent: pci0000:00
[ 4229.293926] calling 0000:00:14.0+ @ 3154, parent: pci0000:00
[ 4229.293987] calling 0000:00:04.0+ @ 3155, parent: pci0000:00
[ 4229.294018] call 0000:00:04.0+ returned 0 after 27 usecs
[ 4229.294029] calling 0000:00:02.0+ @ 3155, parent: pci0000:00
[ 4229.294032] call 0000:00:02.0+ returned 0 after 0 usecs
[ 4229.294041] calling 0000:00:00.0+ @ 3155, parent: pci0000:00
[ 4229.294077] call 0000:00:00.0+ returned 0 after 33 usecs
[ 4229.309076] call 0000:00:1f.3+ returned 0 after 20625 usecs
[ 4229.313001] call 0000:6e:00.0+ returned 0 after 24497 usecs
[ 4229.313018] calling 0000:00:1d.0+ @ 3151, parent: pci0000:00
[ 4229.313312] call 0000:02:00.0+ returned 0 after 24794 usecs
[ 4229.313314] call 0000:00:16.0+ returned 0 after 20976 usecs
[ 4229.313318] call 0000:00:1c.0+ returned 0 after 19760 usecs
[ 4229.313331] call 0000:00:14.2+ returned 0 after 19002 usecs
[ 4229.313335] calling 0000:00:1c.2+ @ 3149, parent: pci0000:00
[ 4229.316041] call 0000:00:15.1+ returned 0 after 22414 usecs
[ 4229.316132] call 0000:00:15.0+ returned 0 after 21928 usecs
[ 4229.332752] call 0000:00:1c.2+ returned 0 after 18959 usecs
[ 4229.332762] call 0000:00:1d.0+ returned 0 after 19277 usecs
[ 4229.332878] call 0000:00:14.0+ returned 0 after 38035 usecs
[ 4229.332959] calling 0000:00:00.0+ @ 3156, parent: pci0000:00
[ 4229.332968] calling 0000:00:02.0+ @ 3154, parent: pci0000:00
[ 4229.332976] calling 0000:00:04.0+ @ 3151, parent: pci0000:00
[ 4229.332983] calling 0000:00:14.0+ @ 3149, parent: pci0000:00
[ 4229.332993] calling 0000:00:14.2+ @ 3114, parent: pci0000:00
[ 4229.333006] calling 0000:00:15.0+ @ 3150, parent: pci0000:00
[ 4229.333012] call 0000:00:00.0+ returned 0 after 48 usecs
[ 4229.333020] calling 0000:00:15.1+ @ 3153, parent: pci0000:00
[ 4229.333022] calling 0000:00:16.0+ @ 3156, parent: pci0000:00
[ 4229.333027] calling 0000:00:1c.0+ @ 3152, parent: pci0000:00
[ 4229.333036] calling 0000:00:1c.2+ @ 3148, parent: pci0000:00
[ 4229.333045] calling 0000:00:1c.4+ @ 3147, parent: pci0000:00
[ 4229.333055] calling 0000:00:1d.0+ @ 3061, parent: pci0000:00
[ 4229.333062] calling 0000:00:1f.0+ @ 3018, parent: pci0000:00
[ 4229.333072] calling 0000:00:1f.2+ @ 3155, parent: pci0000:00
[ 4229.333179] call 0000:00:04.0+ returned 0 after 195 usecs
[ 4229.333185] calling 0000:00:1f.3+ @ 3151, parent: pci0000:00
[ 4229.333190] calling PNP0C09:00+ @ 3140, parent: device:11
[ 4229.333193] call PNP0C09:00+ returned 0 after 0 usecs
[ 4229.333211] calling 0000:00:1f.4+ @ 3157, parent: pci0000:00
[ 4229.333331] call 0000:00:1f.0+ returned 0 after 260 usecs
[ 4229.333343] call 0000:00:1f.2+ returned 0 after 261 usecs
[ 4229.333397] call 0000:00:1f.4+ returned 0 after 177 usecs
[ 4229.333414] call 0000:00:1c.4+ returned 0 after 356 usecs
[ 4229.353153] call 0000:00:1f.3+ returned 0 after 19496 usecs
[ 4229.353202] call 0000:00:14.2+ returned 0 after 19732 usecs
[ 4229.353267] call 0000:00:16.0+ returned 0 after 19765 usecs
[ 4229.353333] call 0000:00:1c.2+ returned 0 after 19817 usecs
[ 4229.353341] call 0000:00:1c.0+ returned 0 after 19834 usecs
[ 4229.353344] calling 0000:02:00.0+ @ 3155, parent: 0000:00:1c.2
[ 4229.353346] call 0000:00:1d.0+ returned 0 after 19811 usecs
[ 4229.353356] calling 0000:01:00.0+ @ 3018, parent: 0000:00:1c.0
[ 4229.353359] calling 0000:6e:00.0+ @ 3158, parent: 0000:00:1d.0
[ 4229.353661] calling INT3403:00+ @ 3140, parent: PNP0C09:00
[ 4229.353664] call INT3403:00+ returned 0 after 0 usecs
[ 4229.353666] calling INT3403:01+ @ 3140, parent: PNP0C09:00
[ 4229.353669] call INT3403:01+ returned 0 after 0 usecs
[ 4229.353671] calling INT3403:02+ @ 3140, parent: PNP0C09:00
[ 4229.353673] call INT3403:02+ returned 0 after 0 usecs
[ 4229.353675] calling INT3403:03+ @ 3140, parent: PNP0C09:00
[ 4229.353677] call INT3403:03+ returned 0 after 0 usecs
[ 4229.353679] calling INT3403:04+ @ 3140, parent: PNP0C09:00
[ 4229.353682] call INT3403:04+ returned 0 after 0 usecs
[ 4229.353684] calling INT344B:00+ @ 3140, parent: pci0000:00
[ 4229.353686] call INT344B:00+ returned 0 after 0 usecs
[ 4229.353689] calling INT3403:05+ @ 3140, parent: pci0000:00
[ 4229.353691] call INT3403:05+ returned 0 after 0 usecs
[ 4229.353695] calling PNP0C14:00+ @ 3140, parent: platform
[ 4229.353697] call PNP0C14:00+ returned 0 after 0 usecs
[ 4229.353700] calling PNP0C14:01+ @ 3140, parent: platform
[ 4229.353702] call PNP0C14:01+ returned 0 after 0 usecs
[ 4229.353706] calling INT33D5:00+ @ 3140, parent: platform
[ 4229.353709] call INT33D5:00+ returned 0 after 0 usecs
[ 4229.353712] calling INT3400:00+ @ 3140, parent: platform
[ 4229.353714] call INT3400:00+ returned 0 after 0 usecs
[ 4229.353806] calling i8042+ @ 3140, parent: platform
[ 4229.353915] call i8042+ returned 0 after 103 usecs
[ 4229.354229] calling iTCO_wdt+ @ 3140, parent: 0000:00:1f.4
[ 4229.354232] call iTCO_wdt+ returned 0 after 0 usecs
[ 4229.354505] call 0000:00:02.0+ returned 0 after 21028 usecs
[ 4229.354565] call 0000:01:00.0+ returned 0 after 1178 usecs
[ 4229.354961] call 0000:00:15.0+ returned 0 after 21437 usecs
[ 4229.355049] call 0000:00:15.1+ returned 0 after 21508 usecs
[ 4229.374393] call 0000:00:14.0+ returned 0 after 40436 usecs
[ 4229.374397] call 0000:6e:00.0+ returned 0 after 20541 usecs
[ 4229.374629] calling i2c-ELAN24EE:00+ @ 3200, parent: i2c-7
[ 4229.374632] calling i2c-DELL07E6:00+ @ 3202, parent: i2c-8
[ 4229.374634] call i2c-ELAN24EE:00+ returned 0 after 0 usecs
[ 4229.374636] call i2c-DELL07E6:00+ returned 0 after 0 usecs
[ 4229.375121] call 0000:02:00.0+ returned 0 after 21262 usecs
[ 4229.375353] calling i2c-DELL07E6:00+ @ 3204, parent: i2c-8
[ 4229.375355] call i2c-DELL07E6:00+ returned 0 after 0 usecs
[ 4229.375380] calling i2c-ELAN24EE:00+ @ 3204, parent: i2c-7
[ 4229.375382] call i2c-ELAN24EE:00+ returned 0 after 0 usecs
[ 4229.375713] calling iTCO_wdt+ @ 3140, parent: 0000:00:1f.4
[ 4229.375716] call iTCO_wdt+ returned 0 after 0 usecs
[ 4229.375862] calling INT3400:00+ @ 3140, parent: platform
[ 4229.375864] call INT3400:00+ returned 0 after 0 usecs
[ 4229.375868] calling INT33D5:00+ @ 3140, parent: platform
[ 4229.375870] call INT33D5:00+ returned 0 after 0 usecs
[ 4229.375876] calling PNP0C14:01+ @ 3140, parent: platform
[ 4229.375878] call PNP0C14:01+ returned 0 after 0 usecs
[ 4229.375881] calling PNP0C14:00+ @ 3140, parent: platform
[ 4229.375882] call PNP0C14:00+ returned 0 after 0 usecs
[ 4229.375886] calling INT3403:05+ @ 3140, parent: pci0000:00
[ 4229.375888] call INT3403:05+ returned 0 after 0 usecs
[ 4229.375893] calling INT344B:00+ @ 3140, parent: pci0000:00
[ 4229.375895] call INT344B:00+ returned 0 after 0 usecs
[ 4229.375897] calling INT3403:04+ @ 3140, parent: PNP0C09:00
[ 4229.375899] call INT3403:04+ returned 0 after 0 usecs
[ 4229.375901] calling INT3403:03+ @ 3140, parent: PNP0C09:00
[ 4229.375903] call INT3403:03+ returned 0 after 0 usecs
[ 4229.375905] calling INT3403:02+ @ 3140, parent: PNP0C09:00
[ 4229.375907] call INT3403:02+ returned 0 after 0 usecs
[ 4229.375909] calling INT3403:01+ @ 3140, parent: PNP0C09:00
[ 4229.375911] call INT3403:01+ returned 0 after 0 usecs
[ 4229.375913] calling INT3403:00+ @ 3140, parent: PNP0C09:00
[ 4229.375915] call INT3403:00+ returned 0 after 0 usecs
[ 4229.375933] calling 0000:6e:00.0+ @ 3201, parent: 0000:00:1d.0
[ 4229.375939] calling 0000:02:00.0+ @ 3204, parent: 0000:00:1c.2
[ 4229.375947] calling 0000:01:00.0+ @ 3155, parent: 0000:00:1c.0
[ 4229.375954] calling 0000:00:1f.4+ @ 3192, parent: pci0000:00
[ 4229.375969] calling 0000:00:1f.3+ @ 3203, parent: pci0000:00
[ 4229.375977] calling 0000:00:1f.2+ @ 3202, parent: pci0000:00
[ 4229.375988] calling 0000:00:1f.0+ @ 3200, parent: pci0000:00
[ 4229.376099] calling PNP0C09:00+ @ 3140, parent: device:11
[ 4229.376102] call PNP0C09:00+ returned 0 after 0 usecs
[ 4229.378949] call 0000:00:1f.2+ returned 0 after 2899 usecs
[ 4229.378952] call 0000:00:1f.4+ returned 0 after 2925 usecs
[ 4229.378954] call 0000:00:1f.0+ returned 0 after 2893 usecs
[ 4229.378961] calling 0000:00:1c.4+ @ 3192, parent: pci0000:00
[ 4229.378987] calling 0000:00:16.0+ @ 3197, parent: pci0000:00
[ 4229.378997] calling 0000:00:15.1+ @ 3160, parent: pci0000:00
[ 4229.379006] calling 0000:00:15.0+ @ 3169, parent: pci0000:00
[ 4229.379938] calling 0000:00:14.2+ @ 3196, parent: pci0000:00
[ 4229.380921] call 0000:01:00.0+ returned 0 after 4853 usecs
[ 4229.380923] calling 0000:00:14.0+ @ 3179, parent: pci0000:00
[ 4229.380936] calling 0000:00:04.0+ @ 3155, parent: pci0000:00
[ 4229.381872] calling 0000:00:1c.0+ @ 3191, parent: pci0000:00
[ 4229.381945] call 0000:00:1c.4+ returned 0 after 2911 usecs
[ 4229.381954] call 0000:00:04.0+ returned 0 after 991 usecs
[ 4229.381956] calling 0000:00:02.0+ @ 3192, parent: pci0000:00
[ 4229.381960] calling 0000:00:00.0+ @ 3155, parent: pci0000:00
[ 4229.382037] call 0000:00:00.0+ returned 0 after 73 usecs
[ 4229.396996] call 0000:6e:00.0+ returned 0 after 20565 usecs
[ 4229.397008] calling 0000:00:1d.0+ @ 3202, parent: pci0000:00
[ 4229.397243] call 0000:00:1f.3+ returned 0 after 20771 usecs
[ 4229.400753] call 0000:00:16.0+ returned 0 after 21252 usecs
[ 4229.400756] call 0000:00:14.2+ returned 0 after 20325 usecs
[ 4229.400767] call 0000:00:1c.0+ returned 0 after 18449 usecs
[ 4229.400769] call 0000:00:02.0+ returned 0 after 18367 usecs
[ 4229.401080] call 0000:02:00.0+ returned 0 after 24548 usecs
[ 4229.401096] calling 0000:00:1c.2+ @ 3200, parent: pci0000:00
[ 4229.403197] call 0000:00:15.1+ returned 0 after 23629 usecs
[ 4229.403285] call 0000:00:15.0+ returned 0 after 23705 usecs
[ 4229.416756] call 0000:00:1d.0+ returned 0 after 19282 usecs
[ 4229.420753] call 0000:00:1c.2+ returned 0 after 19191 usecs
[ 4229.420900] call 0000:00:14.0+ returned 0 after 39036 usecs
[ 7617.866115] calling 0000:00:00.0+ @ 3188, parent: pci0000:00
[ 7617.866122] calling 0000:00:02.0+ @ 3179, parent: pci0000:00
[ 7617.866130] calling 0000:00:04.0+ @ 3200, parent: pci0000:00
[ 7617.866147] calling 0000:00:14.0+ @ 3202, parent: pci0000:00
[ 7617.866156] calling 0000:00:14.2+ @ 3169, parent: pci0000:00
[ 7617.866169] calling 0000:00:15.0+ @ 3160, parent: pci0000:00
[ 7617.866178] call 0000:00:00.0+ returned 0 after 57 usecs
[ 7617.866182] calling 0000:00:15.1+ @ 3204, parent: pci0000:00
[ 7617.866187] calling 0000:00:16.0+ @ 3188, parent: pci0000:00
[ 7617.866191] calling 0000:00:1c.0+ @ 3191, parent: pci0000:00
[ 7617.866194] call 0000:00:04.0+ returned 0 after 56 usecs
[ 7617.866200] calling 0000:00:1c.2+ @ 3192, parent: pci0000:00
[ 7617.866203] calling 0000:00:1c.4+ @ 3200, parent: pci0000:00
[ 7617.866208] calling 0000:00:1d.0+ @ 3196, parent: pci0000:00
[ 7617.866219] calling 0000:00:1f.0+ @ 3197, parent: pci0000:00
[ 7617.866229] calling 0000:00:1f.2+ @ 3203, parent: pci0000:00
[ 7617.866238] calling 0000:00:1f.3+ @ 3201, parent: pci0000:00
[ 7617.866249] calling 0000:00:1f.4+ @ 3155, parent: pci0000:00
[ 7617.866423] calling PNP0C09:00+ @ 3140, parent: device:11
[ 7617.866427] call PNP0C09:00+ returned 0 after 0 usecs
[ 7617.866518] call 0000:00:1f.0+ returned 0 after 288 usecs
[ 7617.866530] call 0000:00:1f.2+ returned 0 after 290 usecs
[ 7617.866533] call 0000:00:1f.4+ returned 0 after 274 usecs
[ 7617.866569] call 0000:00:1c.4+ returned 0 after 354 usecs
[ 7617.885906] call 0000:00:16.0+ returned 0 after 19253 usecs
[ 7617.886197] call 0000:00:14.2+ returned 0 after 19568 usecs
[ 7617.886275] call 0000:00:1f.3+ returned 0 after 19562 usecs
[ 7617.886305] call 0000:00:1d.0+ returned 0 after 19622 usecs
[ 7617.886308] call 0000:00:1c.2+ returned 0 after 19630 usecs
[ 7617.886319] calling 0000:6e:00.0+ @ 3194, parent: 0000:00:1d.0
[ 7617.886322] calling 0000:02:00.0+ @ 3168, parent: 0000:00:1c.2
[ 7617.886327] call 0000:00:1c.0+ returned 0 after 19659 usecs
[ 7617.886343] calling 0000:01:00.0+ @ 3195, parent: 0000:00:1c.0
[ 7617.886357] calling INT3403:00+ @ 3140, parent: PNP0C09:00
[ 7617.886360] call INT3403:00+ returned 0 after 0 usecs
[ 7617.886362] calling INT3403:01+ @ 3140, parent: PNP0C09:00
[ 7617.886364] call INT3403:01+ returned 0 after 0 usecs
[ 7617.886367] calling INT3403:02+ @ 3140, parent: PNP0C09:00
[ 7617.886369] call INT3403:02+ returned 0 after 0 usecs
[ 7617.886371] calling INT3403:03+ @ 3140, parent: PNP0C09:00
[ 7617.886373] call INT3403:03+ returned 0 after 0 usecs
[ 7617.886376] calling INT3403:04+ @ 3140, parent: PNP0C09:00
[ 7617.886378] call INT3403:04+ returned 0 after 0 usecs
[ 7617.886380] calling INT344B:00+ @ 3140, parent: pci0000:00
[ 7617.886383] call INT344B:00+ returned 0 after 0 usecs
[ 7617.886387] calling INT3403:05+ @ 3140, parent: pci0000:00
[ 7617.886389] call INT3403:05+ returned 0 after 0 usecs
[ 7617.886392] calling PNP0C14:00+ @ 3140, parent: platform
[ 7617.886395] call PNP0C14:00+ returned 0 after 0 usecs
[ 7617.886398] calling PNP0C14:01+ @ 3140, parent: platform
[ 7617.886400] call PNP0C14:01+ returned 0 after 0 usecs
[ 7617.886405] calling INT33D5:00+ @ 3140, parent: platform
[ 7617.886407] call INT33D5:00+ returned 0 after 0 usecs
[ 7617.886410] calling INT3400:00+ @ 3140, parent: platform
[ 7617.886412] call INT3400:00+ returned 0 after 0 usecs
[ 7617.886510] calling i8042+ @ 3140, parent: platform
[ 7617.886597] call i8042+ returned 0 after 83 usecs
[ 7617.886619] calling iTCO_wdt+ @ 3140, parent: 0000:00:1f.4
[ 7617.886622] call iTCO_wdt+ returned 0 after 0 usecs
[ 7617.887528] call 0000:00:02.0+ returned 0 after 20899 usecs
[ 7617.887582] call 0000:01:00.0+ returned 0 after 1206 usecs
[ 7617.887949] call 0000:00:15.0+ returned 0 after 21267 usecs
[ 7617.888042] call 0000:00:15.1+ returned 0 after 21343 usecs
[ 7617.907256] call 0000:00:14.0+ returned 0 after 40140 usecs
[ 7617.907258] call 0000:6e:00.0+ returned 0 after 20443 usecs
[ 7617.907442] calling i2c-ELAN24EE:00+ @ 3199, parent: i2c-7
[ 7617.907445] call i2c-ELAN24EE:00+ returned 0 after 0 usecs
[ 7617.907546] calling i2c-DELL07E6:00+ @ 3114, parent: i2c-8
[ 7617.907550] call i2c-DELL07E6:00+ returned 0 after 0 usecs
[ 7617.907979] call 0000:02:00.0+ returned 0 after 21146 usecs
[ 7618.464534] calling 0000:00:02.0+ @ 3151, parent: pci0000:00
[ 7618.464573] calling 0000:00:15.0+ @ 3168, parent: pci0000:00
[ 7618.464583] call 0000:00:15.0+ returned 0 after 2 usecs
[ 7618.464585] calling 0000:00:15.1+ @ 3168, parent: pci0000:00
[ 7618.464595] call 0000:00:15.1+ returned 0 after 2 usecs
[ 7618.464707] calling INT3403:00+ @ 3140, parent: PNP0C09:00
[ 7618.464709] call INT3403:00+ returned 0 after 0 usecs
[ 7618.464710] calling INT3403:01+ @ 3140, parent: PNP0C09:00
[ 7618.464711] call INT3403:01+ returned 0 after 0 usecs
[ 7618.464712] calling INT3403:02+ @ 3140, parent: PNP0C09:00
[ 7618.464714] call INT3403:02+ returned 0 after 0 usecs
[ 7618.464715] calling INT3403:03+ @ 3140, parent: PNP0C09:00
[ 7618.464716] call INT3403:03+ returned 0 after 0 usecs
[ 7618.464717] calling INT3403:04+ @ 3140, parent: PNP0C09:00
[ 7618.464718] call INT3403:04+ returned 0 after 0 usecs
[ 7618.464719] calling INT344B:00+ @ 3140, parent: pci0000:00
[ 7618.465275] call 0000:00:02.0+ returned 0 after 721 usecs
[ 7618.467129] call INT344B:00+ returned 0 after 2351 usecs
[ 7618.467131] calling INT3403:05+ @ 3140, parent: pci0000:00
[ 7618.467132] call INT3403:05+ returned 0 after 0 usecs
[ 7618.467134] calling PNP0C14:00+ @ 3140, parent: platform
[ 7618.467135] call PNP0C14:00+ returned 0 after 0 usecs
[ 7618.467136] calling PNP0C14:01+ @ 3140, parent: platform
[ 7618.467137] call PNP0C14:01+ returned 0 after 0 usecs
[ 7618.467140] calling INT33D5:00+ @ 3140, parent: platform
[ 7618.467141] call INT33D5:00+ returned 0 after 0 usecs
[ 7618.467142] calling INT3400:00+ @ 3140, parent: platform
[ 7618.467143] call INT3400:00+ returned 0 after 0 usecs
[ 7618.467229] calling i2c_designware.0+ @ 3140, parent: 0000:00:15.0
[ 7618.467238] call i2c_designware.0+ returned 0 after 7 usecs
[ 7618.467241] calling i2c_designware.1+ @ 3140, parent: 0000:00:15.1
[ 7618.467248] call i2c_designware.1+ returned 0 after 5 usecs
[ 7618.467310] calling i2c-ELAN24EE:00+ @ 3200, parent: i2c-7
[ 7618.467313] call i2c-ELAN24EE:00+ returned 0 after 0 usecs
[ 7618.467327] calling i2c-DELL07E6:00+ @ 3114, parent: i2c-8
[ 7618.467330] call i2c-DELL07E6:00+ returned 0 after 0 usecs
[ 7618.467423] calling 0000:00:00.0+ @ 3168, parent: pci0000:00
[ 7618.467426] calling 0000:00:02.0+ @ 3114, parent: pci0000:00
[ 7618.467427] call 0000:00:00.0+ returned 0 after 1 usecs
[ 7618.467429] calling 0000:00:04.0+ @ 3168, parent: pci0000:00
[ 7618.467434] call 0000:00:04.0+ returned 0 after 3 usecs
[ 7618.467437] calling 0000:00:14.0+ @ 3168, parent: pci0000:00
[ 7618.467468] calling 0000:00:14.2+ @ 3198, parent: pci0000:00
[ 7618.467472] call 0000:00:14.2+ returned 0 after 1 usecs
[ 7618.467473] calling 0000:00:15.0+ @ 3200, parent: pci0000:00
[ 7618.467476] calling PNP0C09:00+ @ 3140, parent: device:11
[ 7618.467477] calling 0000:00:15.1+ @ 3198, parent: pci0000:00
[ 7618.467478] call 0000:00:15.0+ returned 0 after 0 usecs
[ 7618.467479] calling 0000:00:16.0+ @ 3151, parent: pci0000:00
[ 7618.467481] calling 0000:00:1c.0+ @ 3200, parent: pci0000:00
[ 7618.467483] call 0000:00:1c.0+ returned 0 after 1 usecs
[ 7618.467486] call PNP0C09:00+ returned 0 after 7 usecs
[ 7618.467488] calling 0000:00:1c.2+ @ 3156, parent: pci0000:00
[ 7618.467489] calling 0000:00:1c.4+ @ 3200, parent: pci0000:00
[ 7618.467491] call 0000:00:1c.2+ returned 0 after 1 usecs
[ 7618.467492] call 0000:00:1c.4+ returned 0 after 0 usecs
[ 7618.467494] calling 0000:00:1d.0+ @ 3156, parent: pci0000:00
[ 7618.467495] calling 0000:00:1f.0+ @ 3200, parent: pci0000:00
[ 7618.467496] call 0000:00:1d.0+ returned 0 after 0 usecs
[ 7618.467497] call 0000:00:1f.0+ returned 0 after 0 usecs
[ 7618.467499] calling 0000:00:1f.2+ @ 3199, parent: pci0000:00
[ 7618.467500] calling 0000:00:1f.3+ @ 3156, parent: pci0000:00
[ 7618.467502] calling 0000:00:1f.4+ @ 3200, parent: pci0000:00
[ 7618.467503] call 0000:00:1f.2+ returned 0 after 0 usecs
[ 7618.467505] calling 0000:01:00.0+ @ 3176, parent: 0000:00:1c.0
[ 7618.467506] calling 0000:02:00.0+ @ 3199, parent: 0000:00:1c.2
[ 7618.467507] call 0000:01:00.0+ returned 0 after 0 usecs
[ 7618.467509] calling 0000:6e:00.0+ @ 3176, parent: 0000:00:1d.0
[ 7618.467513] call 0000:6e:00.0+ returned 0 after 2 usecs
[ 7618.467537] calling PNP0C0D:00+ @ 3140, parent: LNXSYBUS:00
[ 7618.467698] call 0000:00:1f.4+ returned 0 after 190 usecs
[ 7618.467699] call 0000:00:15.1+ returned 0 after 0 usecs
[ 7618.467700] call 0000:02:00.0+ returned 0 after 187 usecs
[ 7618.467707] calling phy0+ @ 3179, parent: 0000:02:00.0
[ 7618.467713] call phy0+ returned 0 after 4 usecs
[ 7618.467872] call 0000:00:14.0+ returned 0 after 424 usecs
[ 7618.467878] calling usb1+ @ 3176, parent: 0000:00:14.0
[ 7618.467880] calling usb2+ @ 3177, parent: 0000:00:14.0
[ 7618.467966] call usb2+ returned 0 after 82 usecs
[ 7618.479890] call 0000:00:1f.3+ returned 0 after 12096 usecs
[ 7618.479913] call 0000:00:16.0+ returned 0 after 12139 usecs
[ 7618.479931] calling hdaudioC0D0+ @ 3202, parent: 0000:00:1f.3
[ 7618.479948] calling hdaudioC0D2+ @ 3204, parent: 0000:00:1f.3
[ 7618.479950] call hdaudioC0D2+ returned 0 after 0 usecs
[ 7618.519582] call hdaudioC0D0+ returned 0 after 38716 usecs
[ 7618.524956] call usb1+ returned 0 after 55737 usecs
[ 7618.524983] calling 1-7+ @ 3157, parent: usb1
[ 7618.524988] calling 1-5+ @ 3162, parent: usb1
[ 7618.525113] call 1-7+ returned 0 after 123 usecs
[ 7618.529853] call 0000:00:02.0+ returned 0 after 60959 usecs
[ 7618.570712] ACPI: button: The lid device is not compliant to SW_LID.
[ 7618.570719] call PNP0C0D:00+ returned 0 after 100760 usecs
[ 7618.570722] calling PNP0C0C:00+ @ 3140, parent: LNXSYBUS:00
[ 7618.570725] call PNP0C0C:00+ returned 0 after 0 usecs
[ 7618.570727] calling PNP0C0E:00+ @ 3140, parent: LNXSYBUS:00
[ 7618.570729] call PNP0C0E:00+ returned 0 after 0 usecs
[ 7618.570731] calling ACPI0003:00+ @ 3140, parent: LNXSYBUS:00
[ 7618.571998] call ACPI0003:00+ returned 0 after 1233 usecs
[ 7618.572001] calling PNP0C0A:00+ @ 3140, parent: LNXSYBUS:00
[ 7618.573185] call PNP0C0A:00+ returned 0 after 1154 usecs
[ 7618.573193] calling LNXTHERM:00+ @ 3140, parent: LNXSYBUS:01
[ 7618.573201] call LNXTHERM:00+ returned 0 after 5 usecs
[ 7618.573223] calling INT0800:00+ @ 3140, parent: 0000:00:1f.0
[ 7618.573225] call INT0800:00+ returned 0 after 0 usecs
[ 7618.573227] calling PNP0103:00+ @ 3140, parent: 0000:00:1f.0
[ 7618.573229] call PNP0103:00+ returned 0 after 0 usecs
[ 7618.573231] calling PNP0C09:00+ @ 3140, parent: 0000:00:1f.0
[ 7618.573233] call PNP0C09:00+ returned 0 after 0 usecs
[ 7618.573240] calling ACPI000C:00+ @ 3140, parent: platform
[ 7618.573242] call ACPI000C:00+ returned 0 after 0 usecs
[ 7618.573245] calling INT0E0C:00+ @ 3140, parent: platform
[ 7618.573246] call INT0E0C:00+ returned 0 after 0 usecs
[ 7618.573249] calling INT33A1:00+ @ 3140, parent: platform
[ 7618.573251] call INT33A1:00+ returned 0 after 0 usecs
[ 7618.573254] calling PNP0C0D:00+ @ 3140, parent: platform
[ 7618.573255] call PNP0C0D:00+ returned 0 after 0 usecs
[ 7618.573258] calling PNP0C0C:00+ @ 3140, parent: platform
[ 7618.573259] call PNP0C0C:00+ returned 0 after 0 usecs
[ 7618.573261] calling PNP0C0E:00+ @ 3140, parent: platform
[ 7618.573263] call PNP0C0E:00+ returned 0 after 0 usecs
[ 7618.573265] calling ACPI0003:00+ @ 3140, parent: platform
[ 7618.573267] call ACPI0003:00+ returned 0 after 0 usecs
[ 7618.573269] calling PNP0C0A:00+ @ 3140, parent: platform
[ 7618.573271] call PNP0C0A:00+ returned 0 after 0 usecs
[ 7618.573274] calling INT33D5:00+ @ 3140, parent: platform
[ 7618.573276] call INT33D5:00+ returned 0 after 0 usecs
[ 7618.573278] calling USBC000:00+ @ 3140, parent: platform
[ 7618.573280] call USBC000:00+ returned 0 after 0 usecs
[ 7618.573283] calling LNXPWRBN:00+ @ 3140, parent: LNXSYSTM:00
[ 7618.573285] call LNXPWRBN:00+ returned 0 after 0 usecs
[ 7618.573290] calling 00:00+ @ 3140, parent: pnp0
[ 7618.573293] call 00:00+ returned 0 after 0 usecs
[ 7618.573295] calling 00:01+ @ 3140, parent: pnp0
[ 7618.573533] call 00:01+ returned 0 after 230 usecs
[ 7618.573535] calling 00:02+ @ 3140, parent: pnp0
[ 7618.573537] call 00:02+ returned 0 after 0 usecs
[ 7618.573539] calling 00:03+ @ 3140, parent: pnp0
[ 7618.573541] call 00:03+ returned 0 after 0 usecs
[ 7618.573543] calling 00:04+ @ 3140, parent: pnp0
[ 7618.573545] call 00:04+ returned 0 after 0 usecs
[ 7618.573548] calling 00:05+ @ 3140, parent: pnp0
[ 7618.573549] call 00:05+ returned 0 after 0 usecs
[ 7618.573552] calling 00:06+ @ 3140, parent: pnp0
[ 7618.573554] call 00:06+ returned 0 after 0 usecs
[ 7618.573556] calling 00:07+ @ 3140, parent: pnp0
[ 7618.573558] call 00:07+ returned 0 after 0 usecs
[ 7618.573560] calling 00:08+ @ 3140, parent: pnp0
[ 7618.573562] call 00:08+ returned 0 after 0 usecs
[ 7618.573621] calling pcspkr+ @ 3140, parent: platform
[ 7618.573623] call pcspkr+ returned 0 after 0 usecs
[ 7618.573626] calling efi-framebuffer.0+ @ 3140, parent: platform
[ 7618.573628] call efi-framebuffer.0+ returned 0 after 0 usecs
[ 7618.573632] calling alarmtimer+ @ 3140, parent: platform
[ 7618.573635] call alarmtimer+ returned 0 after 1 usecs
[ 7618.573650] calling serial8250+ @ 3140, parent: platform
[ 7618.573654] call serial8250+ returned 0 after 1 usecs
[ 7618.573678] calling i8042+ @ 3140, parent: platform
[ 7618.573681] call i8042+ returned 0 after 1 usecs
[ 7618.573684] calling serio0+ @ 3140, parent: i8042
[ 7618.573690] call serio0+ returned 0 after 4 usecs
[ 7618.573692] calling serio1+ @ 3140, parent: i8042
[ 7618.573696] call serio1+ returned 0 after 1 usecs
[ 7618.573699] calling rtc0+ @ 3140, parent: 00:01
[ 7618.573702] call rtc0+ returned 0 after 0 usecs
[ 7618.573704] calling input0+ @ 3140, parent: serio0
[ 7618.573709] call input0+ returned 0 after 3 usecs
[ 7618.573711] calling input0::numlock+ @ 3140, parent: input0
[ 7618.573714] call input0::numlock+ returned 0 after 0 usecs
[ 7618.573716] calling input0::capslock+ @ 3140, parent: input0
[ 7618.573718] call input0::capslock+ returned 0 after 0 usecs
[ 7618.573720] calling input0::scrolllock+ @ 3140, parent: input0
[ 7618.573722] call input0::scrolllock+ returned 0 after 0 usecs
[ 7618.573725] calling efivars.0+ @ 3140, parent: platform
[ 7618.573726] call efivars.0+ returned 0 after 0 usecs
[ 7618.573733] calling microcode+ @ 3140, parent: platform
[ 7618.573735] call microcode+ returned 0 after 0 usecs
[ 7618.573741] calling iTCO_wdt+ @ 3140, parent: 0000:00:1f.4
[ 7618.573743] call iTCO_wdt+ returned 0 after 0 usecs
[ 7618.573756] calling input2+ @ 3140, parent: serio1
[ 7618.573758] call input2+ returned 0 after 0 usecs
[ 7618.573762] calling input3+ @ 3140, parent: INT33D5:00
[ 7618.573764] call input3+ returned 0 after 0 usecs
[ 7618.573766] calling input4+ @ 3140, parent: INT33D5:00
[ 7618.573768] call input4+ returned 0 after 0 usecs
[ 7618.573771] calling input5+ @ 3140, parent: PNP0C0D:00
[ 7618.573773] call input5+ returned 0 after 0 usecs
[ 7618.573775] calling input6+ @ 3140, parent: PNP0C0C:00
[ 7618.573777] call input6+ returned 0 after 0 usecs
[ 7618.573779] calling input7+ @ 3140, parent: PNP0C0E:00
[ 7618.573781] call input7+ returned 0 after 0 usecs
[ 7618.573783] calling input8+ @ 3140, parent: LNXPWRBN:00
[ 7618.573785] call input8+ returned 0 after 0 usecs
[ 7618.637914] call 1-5+ returned 0 after 110272 usecs
[ 7618.637957] calling input9+ @ 3140, parent: 1-5:1.0
[ 7618.637960] call input9+ returned 0 after 0 usecs
[ 7618.637965] calling input10+ @ 3140, parent: 1-5:1.2
[ 7618.637967] call input10+ returned 0 after 0 usecs
[ 7618.637971] calling rfkill0+ @ 3140, parent: hci0
[ 7618.637979] call rfkill0+ returned 0 after 5 usecs
[ 7618.637995] calling regulatory.0+ @ 3140, parent: platform
[ 7618.637998] call regulatory.0+ returned 0 after 0 usecs
[ 7618.638002] calling idma64.0+ @ 3140, parent: 0000:00:15.0
[ 7618.638005] call idma64.0+ returned 0 after 1 usecs
[ 7618.638008] calling i2c_designware.0+ @ 3140, parent: 0000:00:15.0
[ 7618.638011] call i2c_designware.0+ returned 0 after 0 usecs
[ 7618.638013] calling input11+ @ 3140, parent: pcspkr
[ 7618.638039] call input11+ returned 0 after 23 usecs
[ 7618.638042] calling idma64.1+ @ 3140, parent: 0000:00:15.1
[ 7618.638045] call idma64.1+ returned 0 after 0 usecs
[ 7618.638048] calling i2c_designware.1+ @ 3140, parent: 0000:00:15.1
[ 7618.638050] call i2c_designware.1+ returned 0 after 0 usecs
[ 7618.638064] calling intel_backlight+ @ 3140, parent: card0-eDP-1
[ 7618.638066] call intel_backlight+ returned 0 after 0 usecs
[ 7618.638071] calling input12+ @ 3140, parent: LNXVIDEO:00
[ 7618.638073] call input12+ returned 0 after 0 usecs
[ 7618.638077] calling coretemp.0+ @ 3140, parent: platform
[ 7618.638079] call coretemp.0+ returned 0 after 0 usecs
[ 7618.638087] calling dell-smbios.0+ @ 3140, parent: platform
[ 7618.638089] call dell-smbios.0+ returned 0 after 0 usecs
[ 7618.638092] calling dell-laptop+ @ 3140, parent: platform
[ 7618.638094] call dell-laptop+ returned 0 after 0 usecs
[ 7618.638096] calling dell::kbd_backlight+ @ 3140, parent: dell-laptop
[ 7618.638098] call dell::kbd_backlight+ returned 0 after 0 usecs
[ 7618.638101] calling input13+ @ 3140, parent: 9DBB5994-A997-11DA-B012-B622A1EF5492
[ 7618.638103] call input13+ returned 0 after 0 usecs
[ 7618.638106] calling dcdbas+ @ 3140, parent: platform
[ 7618.638108] call dcdbas+ returned 0 after 0 usecs
[ 7618.638116] calling input14+ @ 3140, parent: card0
[ 7618.638117] call input14+ returned 0 after 0 usecs
[ 7618.638120] calling input15+ @ 3140, parent: card0
[ 7618.638122] call input15+ returned 0 after 0 usecs
[ 7618.638124] calling input16+ @ 3140, parent: card0
[ 7618.638126] call input16+ returned 0 after 0 usecs
[ 7618.638129] calling input17+ @ 3140, parent: card0
[ 7618.638130] call input17+ returned 0 after 0 usecs
[ 7618.638133] calling input18+ @ 3140, parent: card0
[ 7618.638135] call input18+ returned 0 after 0 usecs
[ 7618.638137] calling input19+ @ 3140, parent: card0
[ 7618.638139] call input19+ returned 0 after 0 usecs
[ 7618.638155] calling i2c-ELAN24EE:00+ @ 3160, parent: i2c-7
[ 7618.638161] calling i2c-DELL07E6:00+ @ 3200, parent: i2c-8
[ 7618.645608] call i2c-ELAN24EE:00+ returned 0 after 7272 usecs
[ 7618.645630] call i2c-DELL07E6:00+ returned 0 after 7290 usecs
[ 7618.645638] calling input22+ @ 3140, parent: 0018:04F3:24EE.0001
[ 7618.645641] call input22+ returned 0 after 0 usecs
[ 7618.645646] calling input28+ @ 3140, parent: 0018:06CB:76AF.0002
[ 7618.645648] call input28+ returned 0 after 0 usecs
[ 7618.645653] calling rfkill1+ @ 3140, parent: phy0
[ 7618.645660] call rfkill1+ returned 0 after 4 usecs
[ 7618.646251] OOM killer enabled.
[ 7618.646253] Restarting tasks ... done.
[ 7618.799766] PM: suspend exit
[ 7618.808071] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[ 7619.537759] ath10k_pci 0000:02:00.0: Unknown eventid: 118809
[ 7619.540740] ath10k_pci 0000:02:00.0: Unknown eventid: 90118
[ 7619.566625] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[ 7620.380879] ath10k_pci 0000:02:00.0: Unknown eventid: 118809
[ 7620.383871] ath10k_pci 0000:02:00.0: Unknown eventid: 90118
[ 7620.405608] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[ 7620.492040] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[ 7625.364671] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[ 7630.248550] wlp2s0: authenticate with 54:67:51:dd:7a:b3
[ 7630.307083] wlp2s0: send auth to 54:67:51:dd:7a:b3 (try 1/3)
[ 7630.308832] wlp2s0: authenticated
[ 7630.314431] wlp2s0: associating with AP with corrupt probe response
[ 7630.317648] wlp2s0: associate with 54:67:51:dd:7a:b3 (try 1/3)
[ 7630.326786] wlp2s0: RX AssocResp from 54:67:51:dd:7a:b3 (capab=0x431 status=0 aid=1)
[ 7630.328811] wlp2s0: associated
[ 7630.332190] ath: EEPROM regdomain: 0x8114
[ 7630.332191] ath: EEPROM indicates we should expect a country code
[ 7630.332192] ath: doing EEPROM country->regdmn map search
[ 7630.332192] ath: country maps to regdmn code: 0x37
[ 7630.332193] ath: Country alpha2 being used: DE
[ 7630.332193] ath: Regpair used: 0x37
[ 7630.332194] ath: regdomain 0x8114 dynamically updated by country IE
[ 7630.707735] IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0: link becomes ready
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: int3403_driver_init needs over 330 ms to finish
2018-03-13 19:39 int3403_driver_init needs over 330 ms to finish Paul Menzel
@ 2018-03-14 7:32 ` Zhang Rui
2018-03-14 8:19 ` Paul Menzel
0 siblings, 1 reply; 3+ messages in thread
From: Zhang Rui @ 2018-03-14 7:32 UTC (permalink / raw)
To: Paul Menzel, Eduardo Valentin; +Cc: linux-pm, linux-kernel
On 二, 2018-03-13 at 20:39 +0100, Paul Menzel wrote:
> Dear Linux folks,
>
>
> Booting the Dell XPS 13 9370 with Linux 4.16-rc4+ and
> `initcall_debug`,
> shows it is shown that int3403_driver_init needs over 330 ms to run.
>
> [ 2.524839] initcall int3403_driver_init+0x0/0x1000
> [int3403_thermal] returned 0 after 333972 usecs
>
I guess most of the time are spent in evaluating ACPI ASL code.
But anyway, please create a bugzilla report and attach both dmesg and
acpidump there.
thanks,
rui
> Please find all Linux messages attached.
>
> Is there a way to reduce that time?
>
>
> Kind regards,
>
> Paul
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: int3403_driver_init needs over 330 ms to finish
2018-03-14 7:32 ` Zhang Rui
@ 2018-03-14 8:19 ` Paul Menzel
0 siblings, 0 replies; 3+ messages in thread
From: Paul Menzel @ 2018-03-14 8:19 UTC (permalink / raw)
To: Zhang Rui, Eduardo Valentin; +Cc: linux-pm, linux-kernel
Dear Rui,
On 03/14/2018 08:32 AM, Zhang Rui wrote:
> On 二, 2018-03-13 at 20:39 +0100, Paul Menzel wrote:
>> Booting the Dell XPS 13 9370 with Linux 4.16-rc4+ and
>> `initcall_debug`,
>> shows it is shown that int3403_driver_init needs over 330 ms to run.
>>
>> [ 2.524839] initcall int3403_driver_init+0x0/0x1000
>> [int3403_thermal] returned 0 after 333972 usecs
>>
> I guess most of the time are spent in evaluating ACPI ASL code.
> But anyway, please create a bugzilla report and attach both dmesg and
> acpidump there.
I created bug report #199113 [1], and attached the requested files.
Kind regards,
Paul
[1] https://bugzilla.kernel.org/show_bug.cgi?id=199113
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2018-03-14 8:19 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2018-03-13 19:39 int3403_driver_init needs over 330 ms to finish Paul Menzel
2018-03-14 7:32 ` Zhang Rui
2018-03-14 8:19 ` Paul Menzel
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).