[PATCH 00/35 v4] PTI support for x32

[PATCH 00/35 v4] PTI support for x32

[Joerg Roedel]

Hi,

here is an updated version of my PTI enablement patches for
the x86-32 architecture. I worked in the review comments for
v3 and updated the patches here and there. The patch that
re-organized RESTORE_REGS to load segments first is dropped
now.

A notable addition in this version is the last
patch which adds debug-checks to the kernel entry/exit
points that will cause a BUG if they find a wrong CR3. The
checks can be enabled with a config-option and are for
debugging only. I used them for testing this series, the
checks did not trigger during my tests. I included the patch
because I am not sure whether it is wanted upstream, if not,
just tell me and I'll drop it.

While at testing: I tested the patches again on a real
machine (4C/8T, 16GB RAM) and ran 'perf top' for the NMI
load, the x86 self-tests in a loop, and a -j16 kernel
compile loop in parallel for a couple of hours. This didn't
trigger any problems. I also boot-tested various
combinations of PAE/non-PAE and HIGHMEM/no-HIGHMEM, also
without any issues.

In particular, the changes to v3 are:

	* Dropped the RESTORE_REGS splitting

	* Changed the cpu_current_top_of_stack to just point
	  to tss.sp1, like it does on x86-64.

	* Simplified SAVE_ALL_NMI to just use
	  SWITCH_TO_KERNEL_CR3 now that this macro returns
	  the old cr3

	* Added a debug Kconfig option which adds checks to
	  the kernel entry/exit paths if the cpu is on the
	  expected cr3 and which will BUG if not.

	* Explicitly clear the high word of the CS slot in
	  pt_regs for hardware that doesn't do it for us.

There is also a again branch with these patches on git.kernel.org:

	  git://git.kernel.org/pub/scm/linux/kernel/git/joro/linux.git pti-x32-v4

The previous version of this patch-set can be found at:

	* For v3:
	  Post : https://marc.info/?l=linux-kernel&m=152024559419876&w=2
	  Git  : git://git.kernel.org/pub/scm/linux/kernel/git/joro/linux.git pti-x32-v3

	* For v2:
	  Post : https://marc.info/?l=linux-kernel&m=151816914932088&w=2
	  Git  : git://git.kernel.org/pub/scm/linux/kernel/git/joro/linux.git pti-x32-v2

Please review.

Thanks,

	Joerg

Joerg Roedel (35):
  x86/asm-offsets: Move TSS_sp0 and TSS_sp1 to asm-offsets.c
  x86/entry/32: Rename TSS_sysenter_sp0 to TSS_entry_stack
  x86/entry/32: Load task stack from x86_tss.sp1 in SYSENTER handler
  x86/entry/32: Put ESPFIX code into a macro
  x86/entry/32: Unshare NMI return path
  x86/entry/32: Split off return-to-kernel path
  x86/entry/32: Enter the kernel via trampoline stack
  x86/entry/32: Leave the kernel via trampoline stack
  x86/entry/32: Introduce SAVE_ALL_NMI and RESTORE_ALL_NMI
  x86/entry/32: Handle Entry from Kernel-Mode on Entry-Stack
  x86/entry/32: Simplify debug entry point
  x86/32: Use tss.sp1 as cpu_current_top_of_stack
  x86/entry/32: Add PTI cr3 switch to non-NMI entry/exit points
  x86/entry/32: Add PTI cr3 switches to NMI handler code
  x86/pgtable: Rename pti_set_user_pgd to pti_set_user_pgtbl
  x86/pgtable/pae: Unshare kernel PMDs when PTI is enabled
  x86/pgtable/32: Allocate 8k page-tables when PTI is enabled
  x86/pgtable: Move pgdp kernel/user conversion functions to pgtable.h
  x86/pgtable: Move pti_set_user_pgtbl() to pgtable.h
  x86/pgtable: Move two more functions from pgtable_64.h to pgtable.h
  x86/mm/pae: Populate valid user PGD entries
  x86/mm/pae: Populate the user page-table with user pgd's
  x86/mm/legacy: Populate the user page-table with user pgd's
  x86/mm/pti: Add an overflow check to pti_clone_pmds()
  x86/mm/pti: Define X86_CR3_PTI_PCID_USER_BIT on x86_32
  x86/mm/pti: Clone CPU_ENTRY_AREA on PMD level on x86_32
  x86/mm/dump_pagetables: Define INIT_PGD
  x86/pgtable/pae: Use separate kernel PMDs for user page-table
  x86/ldt: Reserve address-space range on 32 bit for the LDT
  x86/ldt: Define LDT_END_ADDR
  x86/ldt: Split out sanity check in map_ldt_struct()
  x86/ldt: Enable LDT user-mapping for PAE
  x86/pti: Allow CONFIG_PAGE_TABLE_ISOLATION for x86_32
  x86/mm/pti: Add Warning when booting on a PCID capable CPU
  x86/entry/32: Add debug code to check entry/exit cr3

 arch/x86/Kconfig.debug                      |  12 +
 arch/x86/entry/entry_32.S                   | 640 +++++++++++++++++++++++-----
 arch/x86/include/asm/mmu_context.h          |   4 -
 arch/x86/include/asm/pgtable-2level.h       |   9 +
 arch/x86/include/asm/pgtable-2level_types.h |   3 +
 arch/x86/include/asm/pgtable-3level.h       |   7 +
 arch/x86/include/asm/pgtable-3level_types.h |   6 +-
 arch/x86/include/asm/pgtable.h              |  88 ++++
 arch/x86/include/asm/pgtable_32_types.h     |   9 +-
 arch/x86/include/asm/pgtable_64.h           |  89 +---
 arch/x86/include/asm/pgtable_64_types.h     |   4 +
 arch/x86/include/asm/pgtable_types.h        |  28 +-
 arch/x86/include/asm/processor-flags.h      |   8 +-
 arch/x86/include/asm/processor.h            |   4 -
 arch/x86/include/asm/switch_to.h            |   6 +-
 arch/x86/include/asm/thread_info.h          |   2 -
 arch/x86/kernel/asm-offsets.c               |   5 +
 arch/x86/kernel/asm-offsets_32.c            |   2 +-
 arch/x86/kernel/asm-offsets_64.c            |   2 -
 arch/x86/kernel/cpu/common.c                |   9 +-
 arch/x86/kernel/head_32.S                   |  20 +-
 arch/x86/kernel/ldt.c                       | 137 ++++--
 arch/x86/kernel/process.c                   |   2 -
 arch/x86/kernel/process_32.c                |   4 +-
 arch/x86/mm/dump_pagetables.c               |  21 +-
 arch/x86/mm/pgtable.c                       | 105 ++++-
 arch/x86/mm/pti.c                           |  42 +-
 security/Kconfig                            |   2 +-
 28 files changed, 969 insertions(+), 301 deletions(-)

-- 
2.7.4

[PATCH 01/35] x86/asm-offsets: Move TSS_sp0 and TSS_sp1 to asm-offsets.c

[Joerg Roedel]

From: Joerg Roedel <jroedel@suse.de>

These offsets will be used in 32 bit assembly code as well,
so make them available for all of x86 code.

Signed-off-by: Joerg Roedel <jroedel@suse.de>
---
 arch/x86/kernel/asm-offsets.c    | 4 ++++
 arch/x86/kernel/asm-offsets_64.c | 2 --
 2 files changed, 4 insertions(+), 2 deletions(-)

diff --git a/arch/x86/kernel/asm-offsets.c b/arch/x86/kernel/asm-offsets.c
index 76417a9..232152c 100644
--- a/arch/x86/kernel/asm-offsets.c
+++ b/arch/x86/kernel/asm-offsets.c
@@ -103,4 +103,8 @@ void common(void) {
 	OFFSET(CPU_ENTRY_AREA_entry_trampoline, cpu_entry_area, entry_trampoline);
 	OFFSET(CPU_ENTRY_AREA_entry_stack, cpu_entry_area, entry_stack_page);
 	DEFINE(SIZEOF_entry_stack, sizeof(struct entry_stack));
+
+	/* Offset for sp0 and sp1 into the tss_struct */
+	OFFSET(TSS_sp0, tss_struct, x86_tss.sp0);
+	OFFSET(TSS_sp1, tss_struct, x86_tss.sp1);
 }
diff --git a/arch/x86/kernel/asm-offsets_64.c b/arch/x86/kernel/asm-offsets_64.c
index bf51e51..d2eba73 100644
--- a/arch/x86/kernel/asm-offsets_64.c
+++ b/arch/x86/kernel/asm-offsets_64.c
@@ -65,8 +65,6 @@ int main(void)
 #undef ENTRY
 
 	OFFSET(TSS_ist, tss_struct, x86_tss.ist);
-	OFFSET(TSS_sp0, tss_struct, x86_tss.sp0);
-	OFFSET(TSS_sp1, tss_struct, x86_tss.sp1);
 	BLANK();
 
 #ifdef CONFIG_CC_STACKPROTECTOR
-- 
2.7.4

[PATCH 02/35] x86/entry/32: Rename TSS_sysenter_sp0 to TSS_entry_stack

[Joerg Roedel]

From: Joerg Roedel <jroedel@suse.de>

The stack address doesn't need to be stored in tss.sp0 if
we switch manually like on sysenter. Rename the offset so
that it still makes sense when we change its location.

We will also use this stack for all kernel-entry points, not
just sysenter. Reflect that in the name as well.

Signed-off-by: Joerg Roedel <jroedel@suse.de>
---
 arch/x86/entry/entry_32.S        | 2 +-
 arch/x86/kernel/asm-offsets_32.c | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/x86/entry/entry_32.S b/arch/x86/entry/entry_32.S
index 2a35b1e..e659776 100644
--- a/arch/x86/entry/entry_32.S
+++ b/arch/x86/entry/entry_32.S
@@ -413,7 +413,7 @@ ENTRY(xen_sysenter_target)
  * 0(%ebp) arg6
  */
 ENTRY(entry_SYSENTER_32)
-	movl	TSS_sysenter_sp0(%esp), %esp
+	movl	TSS_entry_stack(%esp), %esp
 .Lsysenter_past_esp:
 	pushl	$__USER_DS		/* pt_regs->ss */
 	pushl	%ebp			/* pt_regs->sp (stashed in bp) */
diff --git a/arch/x86/kernel/asm-offsets_32.c b/arch/x86/kernel/asm-offsets_32.c
index fa1261e..f452bfd 100644
--- a/arch/x86/kernel/asm-offsets_32.c
+++ b/arch/x86/kernel/asm-offsets_32.c
@@ -47,7 +47,7 @@ void foo(void)
 	BLANK();
 
 	/* Offset from the sysenter stack to tss.sp0 */
-	DEFINE(TSS_sysenter_sp0, offsetof(struct cpu_entry_area, tss.x86_tss.sp0) -
+	DEFINE(TSS_entry_stack, offsetof(struct cpu_entry_area, tss.x86_tss.sp0) -
 	       offsetofend(struct cpu_entry_area, entry_stack_page.stack));
 
 #ifdef CONFIG_CC_STACKPROTECTOR
-- 
2.7.4

[PATCH 03/35] x86/entry/32: Load task stack from x86_tss.sp1 in SYSENTER handler

[Joerg Roedel]

From: Joerg Roedel <jroedel@suse.de>

We want x86_tss.sp0 point to the entry stack later to use
it as a trampoline stack for other kernel entry points
besides SYSENTER.

So store the task stack pointer in x86_tss.sp1, which is
otherwise unused by the hardware, as Linux doesn't make use
of Ring 1.

Signed-off-by: Joerg Roedel <jroedel@suse.de>
---
 arch/x86/kernel/asm-offsets_32.c | 2 +-
 arch/x86/kernel/process_32.c     | 2 ++
 2 files changed, 3 insertions(+), 1 deletion(-)

diff --git a/arch/x86/kernel/asm-offsets_32.c b/arch/x86/kernel/asm-offsets_32.c
index f452bfd..b97e48c 100644
--- a/arch/x86/kernel/asm-offsets_32.c
+++ b/arch/x86/kernel/asm-offsets_32.c
@@ -47,7 +47,7 @@ void foo(void)
 	BLANK();
 
 	/* Offset from the sysenter stack to tss.sp0 */
-	DEFINE(TSS_entry_stack, offsetof(struct cpu_entry_area, tss.x86_tss.sp0) -
+	DEFINE(TSS_entry_stack, offsetof(struct cpu_entry_area, tss.x86_tss.sp1) -
 	       offsetofend(struct cpu_entry_area, entry_stack_page.stack));
 
 #ifdef CONFIG_CC_STACKPROTECTOR
diff --git a/arch/x86/kernel/process_32.c b/arch/x86/kernel/process_32.c
index 5224c60..097d36a 100644
--- a/arch/x86/kernel/process_32.c
+++ b/arch/x86/kernel/process_32.c
@@ -292,6 +292,8 @@ __switch_to(struct task_struct *prev_p, struct task_struct *next_p)
 	this_cpu_write(cpu_current_top_of_stack,
 		       (unsigned long)task_stack_page(next_p) +
 		       THREAD_SIZE);
+	/* SYSENTER reads the task-stack from tss.sp1 */
+	this_cpu_write(cpu_tss_rw.x86_tss.sp1, next_p->thread.sp0);
 
 	/*
 	 * Restore %gs if needed (which is common)
-- 
2.7.4

[PATCH 04/35] x86/entry/32: Put ESPFIX code into a macro

[Joerg Roedel]

From: Joerg Roedel <jroedel@suse.de>

This makes it easier to split up the shared iret code path.

Signed-off-by: Joerg Roedel <jroedel@suse.de>
---
 arch/x86/entry/entry_32.S | 97 ++++++++++++++++++++++++-----------------------
 1 file changed, 49 insertions(+), 48 deletions(-)

diff --git a/arch/x86/entry/entry_32.S b/arch/x86/entry/entry_32.S
index e659776..0289bde 100644
--- a/arch/x86/entry/entry_32.S
+++ b/arch/x86/entry/entry_32.S
@@ -221,6 +221,54 @@
 	POP_GS_EX
 .endm
 
+.macro CHECK_AND_APPLY_ESPFIX
+#ifdef CONFIG_X86_ESPFIX32
+#define GDT_ESPFIX_SS PER_CPU_VAR(gdt_page) + (GDT_ENTRY_ESPFIX_SS * 8)
+
+	ALTERNATIVE	"jmp .Lend_\@", "", X86_BUG_ESPFIX
+
+	movl	PT_EFLAGS(%esp), %eax		# mix EFLAGS, SS and CS
+	/*
+	 * Warning: PT_OLDSS(%esp) contains the wrong/random values if we
+	 * are returning to the kernel.
+	 * See comments in process.c:copy_thread() for details.
+	 */
+	movb	PT_OLDSS(%esp), %ah
+	movb	PT_CS(%esp), %al
+	andl	$(X86_EFLAGS_VM | (SEGMENT_TI_MASK << 8) | SEGMENT_RPL_MASK), %eax
+	cmpl	$((SEGMENT_LDT << 8) | USER_RPL), %eax
+	jne	.Lend_\@	# returning to user-space with LDT SS
+
+	/*
+	 * Setup and switch to ESPFIX stack
+	 *
+	 * We're returning to userspace with a 16 bit stack. The CPU will not
+	 * restore the high word of ESP for us on executing iret... This is an
+	 * "official" bug of all the x86-compatible CPUs, which we can work
+	 * around to make dosemu and wine happy. We do this by preloading the
+	 * high word of ESP with the high word of the userspace ESP while
+	 * compensating for the offset by changing to the ESPFIX segment with
+	 * a base address that matches for the difference.
+	 */
+	mov	%esp, %edx			/* load kernel esp */
+	mov	PT_OLDESP(%esp), %eax		/* load userspace esp */
+	mov	%dx, %ax			/* eax: new kernel esp */
+	sub	%eax, %edx			/* offset (low word is 0) */
+	shr	$16, %edx
+	mov	%dl, GDT_ESPFIX_SS + 4		/* bits 16..23 */
+	mov	%dh, GDT_ESPFIX_SS + 7		/* bits 24..31 */
+	pushl	$__ESPFIX_SS
+	pushl	%eax				/* new kernel esp */
+	/*
+	 * Disable interrupts, but do not irqtrace this section: we
+	 * will soon execute iret and the tracer was already set to
+	 * the irqstate after the IRET:
+	 */
+	DISABLE_INTERRUPTS(CLBR_ANY)
+	lss	(%esp), %esp			/* switch to espfix segment */
+.Lend_\@:
+#endif /* CONFIG_X86_ESPFIX32 */
+.endm
 /*
  * %eax: prev task
  * %edx: next task
@@ -548,21 +596,7 @@ ENTRY(entry_INT80_32)
 restore_all:
 	TRACE_IRQS_IRET
 .Lrestore_all_notrace:
-#ifdef CONFIG_X86_ESPFIX32
-	ALTERNATIVE	"jmp .Lrestore_nocheck", "", X86_BUG_ESPFIX
-
-	movl	PT_EFLAGS(%esp), %eax		# mix EFLAGS, SS and CS
-	/*
-	 * Warning: PT_OLDSS(%esp) contains the wrong/random values if we
-	 * are returning to the kernel.
-	 * See comments in process.c:copy_thread() for details.
-	 */
-	movb	PT_OLDSS(%esp), %ah
-	movb	PT_CS(%esp), %al
-	andl	$(X86_EFLAGS_VM | (SEGMENT_TI_MASK << 8) | SEGMENT_RPL_MASK), %eax
-	cmpl	$((SEGMENT_LDT << 8) | USER_RPL), %eax
-	je .Lldt_ss				# returning to user-space with LDT SS
-#endif
+	CHECK_AND_APPLY_ESPFIX
 .Lrestore_nocheck:
 	RESTORE_REGS 4				# skip orig_eax/error_code
 .Lirq_return:
@@ -575,39 +609,6 @@ ENTRY(iret_exc	)
 	jmp	common_exception
 .previous
 	_ASM_EXTABLE(.Lirq_return, iret_exc)
-
-#ifdef CONFIG_X86_ESPFIX32
-.Lldt_ss:
-/*
- * Setup and switch to ESPFIX stack
- *
- * We're returning to userspace with a 16 bit stack. The CPU will not
- * restore the high word of ESP for us on executing iret... This is an
- * "official" bug of all the x86-compatible CPUs, which we can work
- * around to make dosemu and wine happy. We do this by preloading the
- * high word of ESP with the high word of the userspace ESP while
- * compensating for the offset by changing to the ESPFIX segment with
- * a base address that matches for the difference.
- */
-#define GDT_ESPFIX_SS PER_CPU_VAR(gdt_page) + (GDT_ENTRY_ESPFIX_SS * 8)
-	mov	%esp, %edx			/* load kernel esp */
-	mov	PT_OLDESP(%esp), %eax		/* load userspace esp */
-	mov	%dx, %ax			/* eax: new kernel esp */
-	sub	%eax, %edx			/* offset (low word is 0) */
-	shr	$16, %edx
-	mov	%dl, GDT_ESPFIX_SS + 4		/* bits 16..23 */
-	mov	%dh, GDT_ESPFIX_SS + 7		/* bits 24..31 */
-	pushl	$__ESPFIX_SS
-	pushl	%eax				/* new kernel esp */
-	/*
-	 * Disable interrupts, but do not irqtrace this section: we
-	 * will soon execute iret and the tracer was already set to
-	 * the irqstate after the IRET:
-	 */
-	DISABLE_INTERRUPTS(CLBR_ANY)
-	lss	(%esp), %esp			/* switch to espfix segment */
-	jmp	.Lrestore_nocheck
-#endif
 ENDPROC(entry_INT80_32)
 
 .macro FIXUP_ESPFIX_STACK
-- 
2.7.4

[PATCH 05/35] x86/entry/32: Unshare NMI return path

[Joerg Roedel]

From: Joerg Roedel <jroedel@suse.de>

NMI will no longer use most of the shared return path,
because NMI needs special handling when the CR3 switches for
PTI are added. This patch prepares for that.

Signed-off-by: Joerg Roedel <jroedel@suse.de>
---
 arch/x86/entry/entry_32.S | 8 ++++++--
 1 file changed, 6 insertions(+), 2 deletions(-)

diff --git a/arch/x86/entry/entry_32.S b/arch/x86/entry/entry_32.S
index 0289bde..00ae759 100644
--- a/arch/x86/entry/entry_32.S
+++ b/arch/x86/entry/entry_32.S
@@ -1007,7 +1007,7 @@ ENTRY(nmi)
 
 	/* Not on SYSENTER stack. */
 	call	do_nmi
-	jmp	.Lrestore_all_notrace
+	jmp	.Lnmi_return
 
 .Lnmi_from_sysenter_stack:
 	/*
@@ -1018,7 +1018,11 @@ ENTRY(nmi)
 	movl	PER_CPU_VAR(cpu_current_top_of_stack), %esp
 	call	do_nmi
 	movl	%ebx, %esp
-	jmp	.Lrestore_all_notrace
+
+.Lnmi_return:
+	CHECK_AND_APPLY_ESPFIX
+	RESTORE_REGS 4
+	jmp	.Lirq_return
 
 #ifdef CONFIG_X86_ESPFIX32
 .Lnmi_espfix_stack:
-- 
2.7.4

[PATCH 06/35] x86/entry/32: Split off return-to-kernel path

[Joerg Roedel]

From: Joerg Roedel <jroedel@suse.de>

Use a separate return path when we know we are returning to
the kernel. This allows us to put the PTI cr3-switch and the
switch to the entry-stack into the return-to-user path
without further checking.

Signed-off-by: Joerg Roedel <jroedel@suse.de>
---
 arch/x86/entry/entry_32.S | 11 ++++++++---
 1 file changed, 8 insertions(+), 3 deletions(-)

diff --git a/arch/x86/entry/entry_32.S b/arch/x86/entry/entry_32.S
index 00ae759..9bd7718 100644
--- a/arch/x86/entry/entry_32.S
+++ b/arch/x86/entry/entry_32.S
@@ -65,7 +65,7 @@
 # define preempt_stop(clobbers)	DISABLE_INTERRUPTS(clobbers); TRACE_IRQS_OFF
 #else
 # define preempt_stop(clobbers)
-# define resume_kernel		restore_all
+# define resume_kernel		restore_all_kernel
 #endif
 
 .macro TRACE_IRQS_IRET
@@ -400,9 +400,9 @@ ENTRY(resume_kernel)
 	DISABLE_INTERRUPTS(CLBR_ANY)
 .Lneed_resched:
 	cmpl	$0, PER_CPU_VAR(__preempt_count)
-	jnz	restore_all
+	jnz	restore_all_kernel
 	testl	$X86_EFLAGS_IF, PT_EFLAGS(%esp)	# interrupts off (exception path) ?
-	jz	restore_all
+	jz	restore_all_kernel
 	call	preempt_schedule_irq
 	jmp	.Lneed_resched
 END(resume_kernel)
@@ -602,6 +602,11 @@ restore_all:
 .Lirq_return:
 	INTERRUPT_RETURN
 
+restore_all_kernel:
+	TRACE_IRQS_IRET
+	RESTORE_REGS 4
+	jmp	.Lirq_return
+
 .section .fixup, "ax"
 ENTRY(iret_exc	)
 	pushl	$0				# no error code
-- 
2.7.4

[PATCH 07/35] x86/entry/32: Enter the kernel via trampoline stack

[Joerg Roedel]

From: Joerg Roedel <jroedel@suse.de>

Use the entry-stack as a trampoline to enter the kernel. The
entry-stack is already in the cpu_entry_area and will be
mapped to userspace when PTI is enabled.

Signed-off-by: Joerg Roedel <jroedel@suse.de>
---
 arch/x86/entry/entry_32.S        | 136 +++++++++++++++++++++++++++++++--------
 arch/x86/include/asm/switch_to.h |   6 +-
 arch/x86/kernel/asm-offsets.c    |   1 +
 arch/x86/kernel/cpu/common.c     |   5 +-
 arch/x86/kernel/process.c        |   2 -
 arch/x86/kernel/process_32.c     |  10 +--
 6 files changed, 121 insertions(+), 39 deletions(-)

diff --git a/arch/x86/entry/entry_32.S b/arch/x86/entry/entry_32.S
index 9bd7718..88aefb9 100644
--- a/arch/x86/entry/entry_32.S
+++ b/arch/x86/entry/entry_32.S
@@ -154,25 +154,36 @@
 
 #endif /* CONFIG_X86_32_LAZY_GS */
 
-.macro SAVE_ALL pt_regs_ax=%eax
+.macro SAVE_ALL pt_regs_ax=%eax switch_stacks=0
 	cld
+	/* Push segment registers and %eax */
 	PUSH_GS
 	pushl	%fs
 	pushl	%es
 	pushl	%ds
 	pushl	\pt_regs_ax
+
+	/* Load kernel segments */
+	movl	$(__USER_DS), %eax
+	movl	%eax, %ds
+	movl	%eax, %es
+	movl	$(__KERNEL_PERCPU), %eax
+	movl	%eax, %fs
+	SET_KERNEL_GS %eax
+
+	/* Push integer registers and complete PT_REGS */
 	pushl	%ebp
 	pushl	%edi
 	pushl	%esi
 	pushl	%edx
 	pushl	%ecx
 	pushl	%ebx
-	movl	$(__USER_DS), %edx
-	movl	%edx, %ds
-	movl	%edx, %es
-	movl	$(__KERNEL_PERCPU), %edx
-	movl	%edx, %fs
-	SET_KERNEL_GS %edx
+
+	/* Switch to kernel stack if necessary */
+.if \switch_stacks > 0
+	SWITCH_TO_KERNEL_STACK
+.endif
+
 .endm
 
 /*
@@ -269,6 +280,72 @@
 .Lend_\@:
 #endif /* CONFIG_X86_ESPFIX32 */
 .endm
+
+
+/*
+ * Called with pt_regs fully populated and kernel segments loaded,
+ * so we can access PER_CPU and use the integer registers.
+ *
+ * We need to be very careful here with the %esp switch, because an NMI
+ * can happen everywhere. If the NMI handler finds itself on the
+ * entry-stack, it will overwrite the task-stack and everything we
+ * copied there. So allocate the stack-frame on the task-stack and
+ * switch to it before we do any copying.
+ */
+.macro SWITCH_TO_KERNEL_STACK
+
+	ALTERNATIVE     "", "jmp .Lend_\@", X86_FEATURE_XENPV
+
+	/* Are we on the entry stack? Bail out if not! */
+	movl	PER_CPU_VAR(cpu_entry_area), %edi
+	addl	$CPU_ENTRY_AREA_entry_stack, %edi
+	cmpl	%esp, %edi
+	jae	.Lend_\@
+
+	/* Load stack pointer into %esi and %edi */
+	movl	%esp, %esi
+	movl	%esi, %edi
+
+	/* Move %edi to the top of the entry stack */
+	andl	$(MASK_entry_stack), %edi
+	addl	$(SIZEOF_entry_stack), %edi
+
+	/* Load top of task-stack into %edi */
+	movl	TSS_entry_stack(%edi), %edi
+
+	/* Bytes to copy */
+	movl	$PTREGS_SIZE, %ecx
+
+#ifdef CONFIG_VM86
+	testl	$X86_EFLAGS_VM, PT_EFLAGS(%esi)
+	jz	.Lcopy_pt_regs_\@
+
+	/*
+	 * Stack-frame contains 4 additional segment registers when
+	 * coming from VM86 mode
+	 */
+	addl	$(4 * 4), %ecx
+
+.Lcopy_pt_regs_\@:
+#endif
+
+	/* Allocate frame on task-stack */
+	subl	%ecx, %edi
+
+	/* Switch to task-stack */
+	movl	%edi, %esp
+
+	/*
+	 * We are now on the task-stack and can safely copy over the
+	 * stack-frame
+	 */
+	shrl	$2, %ecx
+	cld
+	rep movsl
+
+.Lend_\@:
+.endm
+
 /*
  * %eax: prev task
  * %edx: next task
@@ -462,6 +539,7 @@ ENTRY(xen_sysenter_target)
  */
 ENTRY(entry_SYSENTER_32)
 	movl	TSS_entry_stack(%esp), %esp
+
 .Lsysenter_past_esp:
 	pushl	$__USER_DS		/* pt_regs->ss */
 	pushl	%ebp			/* pt_regs->sp (stashed in bp) */
@@ -470,7 +548,7 @@ ENTRY(entry_SYSENTER_32)
 	pushl	$__USER_CS		/* pt_regs->cs */
 	pushl	$0			/* pt_regs->ip = 0 (placeholder) */
 	pushl	%eax			/* pt_regs->orig_ax */
-	SAVE_ALL pt_regs_ax=$-ENOSYS	/* save rest */
+	SAVE_ALL pt_regs_ax=$-ENOSYS	/* save rest, stack already switched */
 
 	/*
 	 * SYSENTER doesn't filter flags, so we need to clear NT, AC
@@ -581,7 +659,8 @@ ENDPROC(entry_SYSENTER_32)
 ENTRY(entry_INT80_32)
 	ASM_CLAC
 	pushl	%eax			/* pt_regs->orig_ax */
-	SAVE_ALL pt_regs_ax=$-ENOSYS	/* save rest */
+
+	SAVE_ALL pt_regs_ax=$-ENOSYS switch_stacks=1	/* save rest */
 
 	/*
 	 * User mode is traced as though IRQs are on, and the interrupt gate
@@ -673,7 +752,8 @@ END(irq_entries_start)
 common_interrupt:
 	ASM_CLAC
 	addl	$-0x80, (%esp)			/* Adjust vector into the [-256, -1] range */
-	SAVE_ALL
+
+	SAVE_ALL switch_stacks=1
 	ENCODE_FRAME_POINTER
 	TRACE_IRQS_OFF
 	movl	%esp, %eax
@@ -681,16 +761,16 @@ common_interrupt:
 	jmp	ret_from_intr
 ENDPROC(common_interrupt)
 
-#define BUILD_INTERRUPT3(name, nr, fn)	\
-ENTRY(name)				\
-	ASM_CLAC;			\
-	pushl	$~(nr);			\
-	SAVE_ALL;			\
-	ENCODE_FRAME_POINTER;		\
-	TRACE_IRQS_OFF			\
-	movl	%esp, %eax;		\
-	call	fn;			\
-	jmp	ret_from_intr;		\
+#define BUILD_INTERRUPT3(name, nr, fn)			\
+ENTRY(name)						\
+	ASM_CLAC;					\
+	pushl	$~(nr);					\
+	SAVE_ALL switch_stacks=1;			\
+	ENCODE_FRAME_POINTER;				\
+	TRACE_IRQS_OFF					\
+	movl	%esp, %eax;				\
+	call	fn;					\
+	jmp	ret_from_intr;				\
 ENDPROC(name)
 
 #define BUILD_INTERRUPT(name, nr)		\
@@ -916,16 +996,20 @@ common_exception:
 	pushl	%es
 	pushl	%ds
 	pushl	%eax
+	movl	$(__USER_DS), %eax
+	movl	%eax, %ds
+	movl	%eax, %es
+	movl	$(__KERNEL_PERCPU), %eax
+	movl	%eax, %fs
 	pushl	%ebp
 	pushl	%edi
 	pushl	%esi
 	pushl	%edx
 	pushl	%ecx
 	pushl	%ebx
+	SWITCH_TO_KERNEL_STACK
 	ENCODE_FRAME_POINTER
 	cld
-	movl	$(__KERNEL_PERCPU), %ecx
-	movl	%ecx, %fs
 	UNWIND_ESPFIX_STACK
 	GS_TO_REG %ecx
 	movl	PT_GS(%esp), %edi		# get the function address
@@ -933,9 +1017,6 @@ common_exception:
 	movl	$-1, PT_ORIG_EAX(%esp)		# no syscall to restart
 	REG_TO_PTGS %ecx
 	SET_KERNEL_GS %ecx
-	movl	$(__USER_DS), %ecx
-	movl	%ecx, %ds
-	movl	%ecx, %es
 	TRACE_IRQS_OFF
 	movl	%esp, %eax			# pt_regs pointer
 	CALL_NOSPEC %edi
@@ -954,6 +1035,7 @@ ENTRY(debug)
 	 */
 	ASM_CLAC
 	pushl	$-1				# mark this as an int
+
 	SAVE_ALL
 	ENCODE_FRAME_POINTER
 	xorl	%edx, %edx			# error code 0
@@ -989,6 +1071,7 @@ END(debug)
  */
 ENTRY(nmi)
 	ASM_CLAC
+
 #ifdef CONFIG_X86_ESPFIX32
 	pushl	%eax
 	movl	%ss, %eax
@@ -1056,7 +1139,8 @@ END(nmi)
 ENTRY(int3)
 	ASM_CLAC
 	pushl	$-1				# mark this as an int
-	SAVE_ALL
+
+	SAVE_ALL switch_stacks=1
 	ENCODE_FRAME_POINTER
 	TRACE_IRQS_OFF
 	xorl	%edx, %edx			# zero error code
diff --git a/arch/x86/include/asm/switch_to.h b/arch/x86/include/asm/switch_to.h
index eb5f799..20e5f7ab 100644
--- a/arch/x86/include/asm/switch_to.h
+++ b/arch/x86/include/asm/switch_to.h
@@ -89,13 +89,9 @@ static inline void refresh_sysenter_cs(struct thread_struct *thread)
 /* This is used when switching tasks or entering/exiting vm86 mode. */
 static inline void update_sp0(struct task_struct *task)
 {
-	/* On x86_64, sp0 always points to the entry trampoline stack, which is constant: */
-#ifdef CONFIG_X86_32
-	load_sp0(task->thread.sp0);
-#else
+	/* sp0 always points to the entry trampoline stack, which is constant: */
 	if (static_cpu_has(X86_FEATURE_XENPV))
 		load_sp0(task_top_of_stack(task));
-#endif
 }
 
 #endif /* _ASM_X86_SWITCH_TO_H */
diff --git a/arch/x86/kernel/asm-offsets.c b/arch/x86/kernel/asm-offsets.c
index 232152c..86f06e8 100644
--- a/arch/x86/kernel/asm-offsets.c
+++ b/arch/x86/kernel/asm-offsets.c
@@ -103,6 +103,7 @@ void common(void) {
 	OFFSET(CPU_ENTRY_AREA_entry_trampoline, cpu_entry_area, entry_trampoline);
 	OFFSET(CPU_ENTRY_AREA_entry_stack, cpu_entry_area, entry_stack_page);
 	DEFINE(SIZEOF_entry_stack, sizeof(struct entry_stack));
+	DEFINE(MASK_entry_stack, (~(sizeof(struct entry_stack) - 1)));
 
 	/* Offset for sp0 and sp1 into the tss_struct */
 	OFFSET(TSS_sp0, tss_struct, x86_tss.sp0);
diff --git a/arch/x86/kernel/cpu/common.c b/arch/x86/kernel/cpu/common.c
index d63f4b57..a0ed348 100644
--- a/arch/x86/kernel/cpu/common.c
+++ b/arch/x86/kernel/cpu/common.c
@@ -1709,11 +1709,12 @@ void cpu_init(void)
 	enter_lazy_tlb(&init_mm, curr);
 
 	/*
-	 * Initialize the TSS.  Don't bother initializing sp0, as the initial
-	 * task never enters user mode.
+	 * Initialize the TSS.  sp0 points to the entry trampoline stack
+	 * regardless of what task is running.
 	 */
 	set_tss_desc(cpu, &get_cpu_entry_area(cpu)->tss.x86_tss);
 	load_TR_desc();
+	load_sp0((unsigned long)(cpu_entry_stack(cpu) + 1));
 
 	load_mm_ldt(&init_mm);
 
diff --git a/arch/x86/kernel/process.c b/arch/x86/kernel/process.c
index cb368c2..7fab4fa 100644
--- a/arch/x86/kernel/process.c
+++ b/arch/x86/kernel/process.c
@@ -57,14 +57,12 @@ __visible DEFINE_PER_CPU_PAGE_ALIGNED(struct tss_struct, cpu_tss_rw) = {
 		 */
 		.sp0 = (1UL << (BITS_PER_LONG-1)) + 1,
 
-#ifdef CONFIG_X86_64
 		/*
 		 * .sp1 is cpu_current_top_of_stack.  The init task never
 		 * runs user code, but cpu_current_top_of_stack should still
 		 * be well defined before the first context switch.
 		 */
 		.sp1 = TOP_OF_INIT_STACK,
-#endif
 
 #ifdef CONFIG_X86_32
 		.ss0 = __KERNEL_DS,
diff --git a/arch/x86/kernel/process_32.c b/arch/x86/kernel/process_32.c
index 097d36a..3f3a8c6 100644
--- a/arch/x86/kernel/process_32.c
+++ b/arch/x86/kernel/process_32.c
@@ -289,10 +289,12 @@ __switch_to(struct task_struct *prev_p, struct task_struct *next_p)
 	 */
 	update_sp0(next_p);
 	refresh_sysenter_cs(next);
-	this_cpu_write(cpu_current_top_of_stack,
-		       (unsigned long)task_stack_page(next_p) +
-		       THREAD_SIZE);
-	/* SYSENTER reads the task-stack from tss.sp1 */
+	this_cpu_write(cpu_current_top_of_stack, task_top_of_stack(next_p));
+	/*
+	 * TODO: Find a way to let cpu_current_top_of_stack point to
+	 * cpu_tss_rw.x86_tss.sp1. Doing so now results in stack corruption with
+	 * iret exceptions.
+	 */
 	this_cpu_write(cpu_tss_rw.x86_tss.sp1, next_p->thread.sp0);
 
 	/*
-- 
2.7.4

[PATCH 08/35] x86/entry/32: Leave the kernel via trampoline stack

[Joerg Roedel]

From: Joerg Roedel <jroedel@suse.de>

Switch back to the trampoline stack before returning to
userspace.

Signed-off-by: Joerg Roedel <jroedel@suse.de>
---
 arch/x86/entry/entry_32.S | 79 +++++++++++++++++++++++++++++++++++++++++++++--
 1 file changed, 77 insertions(+), 2 deletions(-)

diff --git a/arch/x86/entry/entry_32.S b/arch/x86/entry/entry_32.S
index 88aefb9..73cde25 100644
--- a/arch/x86/entry/entry_32.S
+++ b/arch/x86/entry/entry_32.S
@@ -347,6 +347,60 @@
 .endm
 
 /*
+ * Switch back from the kernel stack to the entry stack.
+ *
+ * The %esp register must point to pt_regs on the task stack. It will
+ * first calculate the size of the stack-frame to copy, depending on
+ * whether we return to VM86 mode or not. With that it uses 'rep movsl'
+ * to copy the contents of the stack over to the entry stack.
+ *
+ * We must be very careful here, as we can't trust the contents of the
+ * task-stack once we switched to the entry-stack. When an NMI happens
+ * while on the entry-stack, the NMI handler will switch back to the top
+ * of the task stack, overwriting our stack-frame we are about to copy.
+ * Therefore we switch the stack only after everything is copied over.
+ */
+.macro SWITCH_TO_ENTRY_STACK
+
+	ALTERNATIVE     "", "jmp .Lend_\@", X86_FEATURE_XENPV
+
+	/* Bytes to copy */
+	movl	$PTREGS_SIZE, %ecx
+
+#ifdef CONFIG_VM86
+	testl	$(X86_EFLAGS_VM), PT_EFLAGS(%esp)
+	jz	.Lcopy_pt_regs_\@
+
+	/* Additional 4 registers to copy when returning to VM86 mode */
+	addl    $(4 * 4), %ecx
+
+.Lcopy_pt_regs_\@:
+#endif
+
+	/* Initialize source and destination for movsl */
+	movl	PER_CPU_VAR(cpu_tss_rw + TSS_sp0), %edi
+	subl	%ecx, %edi
+	movl	%esp, %esi
+
+	/* Save future stack pointer in %ebx */
+	movl	%edi, %ebx
+
+	/* Copy over the stack-frame */
+	shrl	$2, %ecx
+	cld
+	rep movsl
+
+	/*
+	 * Switch to entry-stack - needs to happen after everything is
+	 * copied because the NMI handler will overwrite the task-stack
+	 * when on entry-stack
+	 */
+	movl	%ebx, %esp
+
+.Lend_\@:
+.endm
+
+/*
  * %eax: prev task
  * %edx: next task
  */
@@ -587,25 +641,45 @@ ENTRY(entry_SYSENTER_32)
 
 /* Opportunistic SYSEXIT */
 	TRACE_IRQS_ON			/* User mode traces as IRQs on. */
+
+	/*
+	 * Setup entry stack - we keep the pointer in %eax and do the
+	 * switch after almost all user-state is restored.
+	 */
+
+	/* Load entry stack pointer and allocate frame for eflags/eax */ 
+	movl	PER_CPU_VAR(cpu_tss_rw + TSS_sp0), %eax
+	subl	$(2*4), %eax
+
+	/* Copy eflags and eax to entry stack */
+	movl	PT_EFLAGS(%esp), %edi
+	movl	PT_EAX(%esp), %esi
+	movl	%edi, (%eax)
+	movl	%esi, 4(%eax)
+
+	/* Restore user registers and segments */
 	movl	PT_EIP(%esp), %edx	/* pt_regs->ip */
 	movl	PT_OLDESP(%esp), %ecx	/* pt_regs->sp */
 1:	mov	PT_FS(%esp), %fs
 	PTGS_TO_GS
+
 	popl	%ebx			/* pt_regs->bx */
 	addl	$2*4, %esp		/* skip pt_regs->cx and pt_regs->dx */
 	popl	%esi			/* pt_regs->si */
 	popl	%edi			/* pt_regs->di */
 	popl	%ebp			/* pt_regs->bp */
-	popl	%eax			/* pt_regs->ax */
+
+	/* Switch to entry stack */
+	movl	%eax, %esp
 
 	/*
 	 * Restore all flags except IF. (We restore IF separately because
 	 * STI gives a one-instruction window in which we won't be interrupted,
 	 * whereas POPF does not.)
 	 */
-	addl	$PT_EFLAGS-PT_DS, %esp	/* point esp at pt_regs->flags */
 	btr	$X86_EFLAGS_IF_BIT, (%esp)
 	popfl
+	popl	%eax
 
 	/*
 	 * Return back to the vDSO, which will pop ecx and edx.
@@ -674,6 +748,7 @@ ENTRY(entry_INT80_32)
 
 restore_all:
 	TRACE_IRQS_IRET
+	SWITCH_TO_ENTRY_STACK
 .Lrestore_all_notrace:
 	CHECK_AND_APPLY_ESPFIX
 .Lrestore_nocheck:
-- 
2.7.4

[PATCH 09/35] x86/entry/32: Introduce SAVE_ALL_NMI and RESTORE_ALL_NMI

[Joerg Roedel]

From: Joerg Roedel <jroedel@suse.de>

These macros will be used in the NMI handler code and
replace plain SAVE_ALL and RESTORE_REGS there. We will add
the NMI-specific CR3-switch to these macros later.

Signed-off-by: Joerg Roedel <jroedel@suse.de>
---
 arch/x86/entry/entry_32.S | 15 +++++++++++----
 1 file changed, 11 insertions(+), 4 deletions(-)

diff --git a/arch/x86/entry/entry_32.S b/arch/x86/entry/entry_32.S
index 73cde25..b60b3de 100644
--- a/arch/x86/entry/entry_32.S
+++ b/arch/x86/entry/entry_32.S
@@ -186,6 +186,9 @@
 
 .endm
 
+.macro SAVE_ALL_NMI
+	SAVE_ALL
+.endm
 /*
  * This is a sneaky trick to help the unwinder find pt_regs on the stack.  The
  * frame pointer is replaced with an encoded pointer to pt_regs.  The encoding
@@ -232,6 +235,10 @@
 	POP_GS_EX
 .endm
 
+.macro RESTORE_ALL_NMI pop=0
+	RESTORE_REGS pop=\pop
+.endm
+
 .macro CHECK_AND_APPLY_ESPFIX
 #ifdef CONFIG_X86_ESPFIX32
 #define GDT_ESPFIX_SS PER_CPU_VAR(gdt_page) + (GDT_ENTRY_ESPFIX_SS * 8)
@@ -1156,7 +1163,7 @@ ENTRY(nmi)
 #endif
 
 	pushl	%eax				# pt_regs->orig_ax
-	SAVE_ALL
+	SAVE_ALL_NMI
 	ENCODE_FRAME_POINTER
 	xorl	%edx, %edx			# zero error code
 	movl	%esp, %eax			# pt_regs pointer
@@ -1184,7 +1191,7 @@ ENTRY(nmi)
 
 .Lnmi_return:
 	CHECK_AND_APPLY_ESPFIX
-	RESTORE_REGS 4
+	RESTORE_ALL_NMI pop=4
 	jmp	.Lirq_return
 
 #ifdef CONFIG_X86_ESPFIX32
@@ -1200,12 +1207,12 @@ ENTRY(nmi)
 	pushl	16(%esp)
 	.endr
 	pushl	%eax
-	SAVE_ALL
+	SAVE_ALL_NMI
 	ENCODE_FRAME_POINTER
 	FIXUP_ESPFIX_STACK			# %eax == %esp
 	xorl	%edx, %edx			# zero error code
 	call	do_nmi
-	RESTORE_REGS
+	RESTORE_ALL_NMI
 	lss	12+4(%esp), %esp		# back to espfix stack
 	jmp	.Lirq_return
 #endif
-- 
2.7.4

[PATCH 10/35] x86/entry/32: Handle Entry from Kernel-Mode on Entry-Stack

[Joerg Roedel]

From: Joerg Roedel <jroedel@suse.de>

It can happen that we enter the kernel from kernel-mode and
on the entry-stack. The most common way this happens is when
we get an exception while loading the user-space segment
registers on the kernel-to-userspace exit path.

The segment loading needs to be done after the entry-stack
switch, because the stack-switch needs kernel %fs for
per_cpu access.

When this happens, we need to make sure that we leave the
kernel with the entry-stack again, so that the interrupted
code-path runs on the right stack when switching to the
user-cr3.

We do this by detecting this condition on kernel-entry by
checking CS.RPL and %esp, and if it happens, we copy over
the complete content of the entry stack to the task-stack.
This needs to be done because once we enter the exception
handlers we might be scheduled out or even migrated to a
different CPU, so that we can't rely on the entry-stack
contents. We also leave a marker in the stack-frame to
detect this condition on the exit path.

On the exit path the copy is reversed, we copy all of the
remaining task-stack back to the entry-stack and switch
to it.

Signed-off-by: Joerg Roedel <jroedel@suse.de>
---
 arch/x86/entry/entry_32.S | 116 +++++++++++++++++++++++++++++++++++++++++++++-
 1 file changed, 115 insertions(+), 1 deletion(-)

diff --git a/arch/x86/entry/entry_32.S b/arch/x86/entry/entry_32.S
index b60b3de..4133f95 100644
--- a/arch/x86/entry/entry_32.S
+++ b/arch/x86/entry/entry_32.S
@@ -299,6 +299,9 @@
  * copied there. So allocate the stack-frame on the task-stack and
  * switch to it before we do any copying.
  */
+
+#define CS_FROM_ENTRY_STACK	(1 << 31)
+
 .macro SWITCH_TO_KERNEL_STACK
 
 	ALTERNATIVE     "", "jmp .Lend_\@", X86_FEATURE_XENPV
@@ -320,6 +323,16 @@
 	/* Load top of task-stack into %edi */
 	movl	TSS_entry_stack(%edi), %edi
 
+	/*
+	 * Clear upper bits of the CS slot in pt_regs in case hardware
+	 * didn't clear it for us
+	 */
+	andl	$(0x0000ffff), PT_CS(%esp)
+
+	/* Special case - entry from kernel mode via entry stack */
+	testl	$SEGMENT_RPL_MASK, PT_CS(%esp)
+	jz	.Lentry_from_kernel_\@
+
 	/* Bytes to copy */
 	movl	$PTREGS_SIZE, %ecx
 
@@ -333,8 +346,8 @@
 	 */
 	addl	$(4 * 4), %ecx
 
-.Lcopy_pt_regs_\@:
 #endif
+.Lcopy_pt_regs_\@:
 
 	/* Allocate frame on task-stack */
 	subl	%ecx, %edi
@@ -350,6 +363,56 @@
 	cld
 	rep movsl
 
+	jmp .Lend_\@
+
+.Lentry_from_kernel_\@:
+
+	/*
+	 * This handles the case when we enter the kernel from
+	 * kernel-mode and %esp points to the entry-stack. When this
+	 * happens we need to switch to the task-stack to run C code,
+	 * but switch back to the entry-stack again when we approach
+	 * iret and return to the interrupted code-path. This usually
+	 * happens when we hit an exception while restoring user-space
+	 * segment registers on the way back to user-space.
+	 *
+	 * When we switch to the task-stack here, we can't trust the
+	 * contents of the entry-stack anymore, as the exception handler
+	 * might be scheduled out or moved to another CPU. Therefore we
+	 * copy the complete entry-stack to the task-stack and set a
+	 * marker in the iret-frame (bit 31 of the CS dword) to detect
+	 * what we've done on the iret path.
+	 *
+	 * On the iret path we copy everything back and switch to the
+	 * entry-stack, so that the interrupted kernel code-path
+	 * continues on the same stack it was interrupted with.
+	 *
+	 * Be aware that an NMI can happen anytime in this code.
+	 *
+	 * %esi: Entry-Stack pointer (same as %esp)
+	 * %edi: Top of the task stack
+	 */
+
+	/* Calculate number of bytes on the entry stack in %ecx */
+	movl	%esi, %ecx
+
+	/* %ecx to the top of entry-stack */
+	andl	$(MASK_entry_stack), %ecx
+	addl	$(SIZEOF_entry_stack), %ecx
+
+	/* Number of bytes on the entry stack to %ecx */
+	sub	%esi, %ecx
+
+	/* Mark stackframe as coming from entry stack */
+	orl	$CS_FROM_ENTRY_STACK, PT_CS(%esp)
+
+	/*
+	 * %esi and %edi are unchanged, %ecx contains the number of
+	 * bytes to copy. The code at .Lcopy_pt_regs_\@ will allocate
+	 * the stack-frame on task-stack and copy everything over
+	 */
+	jmp .Lcopy_pt_regs_\@
+
 .Lend_\@:
 .endm
 
@@ -408,6 +471,56 @@
 .endm
 
 /*
+ * This macro handles the case when we return to kernel-mode on the iret
+ * path and have to switch back to the entry stack.
+ *
+ * See the comments below the .Lentry_from_kernel_\@ label in the
+ * SWITCH_TO_KERNEL_STACK macro for more details.
+ */
+.macro PARANOID_EXIT_TO_KERNEL_MODE
+
+	/*
+	 * Test if we entered the kernel with the entry-stack. Most
+	 * likely we did not, because this code only runs on the
+	 * return-to-kernel path.
+	 */
+	testl	$CS_FROM_ENTRY_STACK, PT_CS(%esp)
+	jz	.Lend_\@
+
+	/* Unlikely slow-path */
+
+	/* Clear marker from stack-frame */
+	andl	$(~CS_FROM_ENTRY_STACK), PT_CS(%esp)
+
+	/* Copy the remaining task-stack contents to entry-stack */
+	movl	%esp, %esi
+	movl	PER_CPU_VAR(cpu_tss_rw + TSS_sp0), %edi
+
+	/* Bytes on the task-stack to ecx */
+	movl	PER_CPU_VAR(cpu_current_top_of_stack), %ecx
+	subl	%esi, %ecx
+
+	/* Allocate stack-frame on entry-stack */
+	subl	%ecx, %edi
+
+	/*
+	 * Save future stack-pointer, we must not switch until the
+	 * copy is done, otherwise the NMI handler could destroy the
+	 * contents of the task-stack we are about to copy.
+	 */
+	movl	%edi, %ebx
+
+	/* Do the copy */
+	shrl	$2, %ecx
+	cld
+	rep movsl
+
+	/* Safe to switch to entry-stack now */
+	movl	%ebx, %esp
+
+.Lend_\@:
+.endm
+/*
  * %eax: prev task
  * %edx: next task
  */
@@ -765,6 +878,7 @@ restore_all:
 
 restore_all_kernel:
 	TRACE_IRQS_IRET
+	PARANOID_EXIT_TO_KERNEL_MODE
 	RESTORE_REGS 4
 	jmp	.Lirq_return
 
-- 
2.7.4

[PATCH 11/35] x86/entry/32: Simplify debug entry point

[Joerg Roedel]

From: Joerg Roedel <jroedel@suse.de>

The common exception entry code now handles the
entry-from-sysenter stack situation and makes sure to leave
with the same stack as it entered the kernel.

So there is no need anymore for the special handling in the
debug entry code.

Signed-off-by: Joerg Roedel <jroedel@suse.de>
---
 arch/x86/entry/entry_32.S | 35 +++--------------------------------
 1 file changed, 3 insertions(+), 32 deletions(-)

diff --git a/arch/x86/entry/entry_32.S b/arch/x86/entry/entry_32.S
index 4133f95..3c4822a 100644
--- a/arch/x86/entry/entry_32.S
+++ b/arch/x86/entry/entry_32.S
@@ -1221,41 +1221,12 @@ END(common_exception)
 
 ENTRY(debug)
 	/*
-	 * #DB can happen at the first instruction of
-	 * entry_SYSENTER_32 or in Xen's SYSENTER prologue.  If this
-	 * happens, then we will be running on a very small stack.  We
-	 * need to detect this condition and switch to the thread
-	 * stack before calling any C code at all.
-	 *
-	 * If you edit this code, keep in mind that NMIs can happen in here.
+	 * Entry from sysenter is now handled in common_exception
 	 */
 	ASM_CLAC
 	pushl	$-1				# mark this as an int
-
-	SAVE_ALL
-	ENCODE_FRAME_POINTER
-	xorl	%edx, %edx			# error code 0
-	movl	%esp, %eax			# pt_regs pointer
-
-	/* Are we currently on the SYSENTER stack? */
-	movl	PER_CPU_VAR(cpu_entry_area), %ecx
-	addl	$CPU_ENTRY_AREA_entry_stack + SIZEOF_entry_stack, %ecx
-	subl	%eax, %ecx	/* ecx = (end of entry_stack) - esp */
-	cmpl	$SIZEOF_entry_stack, %ecx
-	jb	.Ldebug_from_sysenter_stack
-
-	TRACE_IRQS_OFF
-	call	do_debug
-	jmp	ret_from_exception
-
-.Ldebug_from_sysenter_stack:
-	/* We're on the SYSENTER stack.  Switch off. */
-	movl	%esp, %ebx
-	movl	PER_CPU_VAR(cpu_current_top_of_stack), %esp
-	TRACE_IRQS_OFF
-	call	do_debug
-	movl	%ebx, %esp
-	jmp	ret_from_exception
+	pushl	$do_debug
+	jmp	common_exception
 END(debug)
 
 /*
-- 
2.7.4

[PATCH 12/35] x86/32: Use tss.sp1 as cpu_current_top_of_stack

[Joerg Roedel]

From: Joerg Roedel <jroedel@suse.de>

Now that we store the task-stack in tss.sp1 we can also use
it as cpu_current_top_of_stack. This unifies the handling
with x86-64.

Signed-off-by: Joerg Roedel <jroedel@suse.de>
---
 arch/x86/include/asm/processor.h   | 4 ----
 arch/x86/include/asm/thread_info.h | 2 --
 arch/x86/kernel/cpu/common.c       | 4 ----
 arch/x86/kernel/process_32.c       | 6 ------
 4 files changed, 16 deletions(-)

diff --git a/arch/x86/include/asm/processor.h b/arch/x86/include/asm/processor.h
index 513f960..b7c238e 100644
--- a/arch/x86/include/asm/processor.h
+++ b/arch/x86/include/asm/processor.h
@@ -374,12 +374,8 @@ DECLARE_PER_CPU_PAGE_ALIGNED(struct tss_struct, cpu_tss_rw);
 #define __KERNEL_TSS_LIMIT	\
 	(IO_BITMAP_OFFSET + IO_BITMAP_BYTES + sizeof(unsigned long) - 1)
 
-#ifdef CONFIG_X86_32
-DECLARE_PER_CPU(unsigned long, cpu_current_top_of_stack);
-#else
 /* The RO copy can't be accessed with this_cpu_xyz(), so use the RW copy. */
 #define cpu_current_top_of_stack cpu_tss_rw.x86_tss.sp1
-#endif
 
 /*
  * Save the original ist values for checking stack pointers during debugging
diff --git a/arch/x86/include/asm/thread_info.h b/arch/x86/include/asm/thread_info.h
index eda3b68..ea7e118 100644
--- a/arch/x86/include/asm/thread_info.h
+++ b/arch/x86/include/asm/thread_info.h
@@ -207,9 +207,7 @@ static inline int arch_within_stack_frames(const void * const stack,
 
 #else /* !__ASSEMBLY__ */
 
-#ifdef CONFIG_X86_64
 # define cpu_current_top_of_stack (cpu_tss_rw + TSS_sp1)
-#endif
 
 #endif
 
diff --git a/arch/x86/kernel/cpu/common.c b/arch/x86/kernel/cpu/common.c
index a0ed348..de1c595 100644
--- a/arch/x86/kernel/cpu/common.c
+++ b/arch/x86/kernel/cpu/common.c
@@ -1503,10 +1503,6 @@ EXPORT_PER_CPU_SYMBOL(__preempt_count);
  * the top of the kernel stack.  Use an extra percpu variable to track the
  * top of the kernel stack directly.
  */
-DEFINE_PER_CPU(unsigned long, cpu_current_top_of_stack) =
-	(unsigned long)&init_thread_union + THREAD_SIZE;
-EXPORT_PER_CPU_SYMBOL(cpu_current_top_of_stack);
-
 #ifdef CONFIG_CC_STACKPROTECTOR
 DEFINE_PER_CPU_ALIGNED(struct stack_canary, stack_canary);
 #endif
diff --git a/arch/x86/kernel/process_32.c b/arch/x86/kernel/process_32.c
index 3f3a8c6..8c29fd5 100644
--- a/arch/x86/kernel/process_32.c
+++ b/arch/x86/kernel/process_32.c
@@ -290,12 +290,6 @@ __switch_to(struct task_struct *prev_p, struct task_struct *next_p)
 	update_sp0(next_p);
 	refresh_sysenter_cs(next);
 	this_cpu_write(cpu_current_top_of_stack, task_top_of_stack(next_p));
-	/*
-	 * TODO: Find a way to let cpu_current_top_of_stack point to
-	 * cpu_tss_rw.x86_tss.sp1. Doing so now results in stack corruption with
-	 * iret exceptions.
-	 */
-	this_cpu_write(cpu_tss_rw.x86_tss.sp1, next_p->thread.sp0);
 
 	/*
 	 * Restore %gs if needed (which is common)
-- 
2.7.4

[PATCH 13/35] x86/entry/32: Add PTI cr3 switch to non-NMI entry/exit points

[Joerg Roedel]

From: Joerg Roedel <jroedel@suse.de>

Add unconditional cr3 switches between user and kernel cr3
to all non-NMI entry and exit points.

Signed-off-by: Joerg Roedel <jroedel@suse.de>
---
 arch/x86/entry/entry_32.S | 83 ++++++++++++++++++++++++++++++++++++++++++++---
 1 file changed, 79 insertions(+), 4 deletions(-)

diff --git a/arch/x86/entry/entry_32.S b/arch/x86/entry/entry_32.S
index 3c4822a..86b3fe6d 100644
--- a/arch/x86/entry/entry_32.S
+++ b/arch/x86/entry/entry_32.S
@@ -154,6 +154,33 @@
 
 #endif /* CONFIG_X86_32_LAZY_GS */
 
+/* Unconditionally switch to user cr3 */
+.macro SWITCH_TO_USER_CR3 scratch_reg:req
+	ALTERNATIVE "jmp .Lend_\@", "", X86_FEATURE_PTI
+
+	movl	%cr3, \scratch_reg
+	orl	$PTI_SWITCH_MASK, \scratch_reg
+	movl	\scratch_reg, %cr3
+.Lend_\@:
+.endm
+
+/*
+ * Switch to kernel cr3 if not already loaded and return current cr3 in
+ * \scratch_reg
+ */
+.macro SWITCH_TO_KERNEL_CR3 scratch_reg:req
+	ALTERNATIVE "jmp .Lend_\@", "", X86_FEATURE_PTI
+	movl	%cr3, \scratch_reg
+	/* Test if we are already on kernel CR3 */
+	testl	$PTI_SWITCH_MASK, \scratch_reg
+	jz	.Lend_\@
+	andl	$(~PTI_SWITCH_MASK), \scratch_reg
+	movl	\scratch_reg, %cr3
+	/* Return original CR3 in \scratch_reg */
+	orl	$PTI_SWITCH_MASK, \scratch_reg
+.Lend_\@:
+.endm
+
 .macro SAVE_ALL pt_regs_ax=%eax switch_stacks=0
 	cld
 	/* Push segment registers and %eax */
@@ -288,7 +315,6 @@
 #endif /* CONFIG_X86_ESPFIX32 */
 .endm
 
-
 /*
  * Called with pt_regs fully populated and kernel segments loaded,
  * so we can access PER_CPU and use the integer registers.
@@ -301,11 +327,19 @@
  */
 
 #define CS_FROM_ENTRY_STACK	(1 << 31)
+#define CS_FROM_USER_CR3	(1 << 30)
 
 .macro SWITCH_TO_KERNEL_STACK
 
 	ALTERNATIVE     "", "jmp .Lend_\@", X86_FEATURE_XENPV
 
+	SWITCH_TO_KERNEL_CR3 scratch_reg=%eax
+
+	/*
+	 * %eax now contains the entry cr3 and we carry it forward in
+	 * that register for the time this macro runs
+	 */
+
 	/* Are we on the entry stack? Bail out if not! */
 	movl	PER_CPU_VAR(cpu_entry_area), %edi
 	addl	$CPU_ENTRY_AREA_entry_stack, %edi
@@ -374,7 +408,8 @@
 	 * but switch back to the entry-stack again when we approach
 	 * iret and return to the interrupted code-path. This usually
 	 * happens when we hit an exception while restoring user-space
-	 * segment registers on the way back to user-space.
+	 * segment registers on the way back to user-space or when the
+	 * sysenter handler runs with eflags.tf set.
 	 *
 	 * When we switch to the task-stack here, we can't trust the
 	 * contents of the entry-stack anymore, as the exception handler
@@ -391,6 +426,7 @@
 	 *
 	 * %esi: Entry-Stack pointer (same as %esp)
 	 * %edi: Top of the task stack
+	 * %eax: CR3 on kernel entry
 	 */
 
 	/* Calculate number of bytes on the entry stack in %ecx */
@@ -407,6 +443,14 @@
 	orl	$CS_FROM_ENTRY_STACK, PT_CS(%esp)
 
 	/*
+	 * Test the cr3 used to enter the kernel and add a marker
+	 * so that we can switch back to it before iret.
+	 */
+	testl	$PTI_SWITCH_MASK, %eax
+	jz	.Lcopy_pt_regs_\@
+	orl	$CS_FROM_USER_CR3, PT_CS(%esp)
+
+	/*
 	 * %esi and %edi are unchanged, %ecx contains the number of
 	 * bytes to copy. The code at .Lcopy_pt_regs_\@ will allocate
 	 * the stack-frame on task-stack and copy everything over
@@ -472,7 +516,7 @@
 
 /*
  * This macro handles the case when we return to kernel-mode on the iret
- * path and have to switch back to the entry stack.
+ * path and have to switch back to the entry stack and/or user-cr3
  *
  * See the comments below the .Lentry_from_kernel_\@ label in the
  * SWITCH_TO_KERNEL_STACK macro for more details.
@@ -518,6 +562,18 @@
 	/* Safe to switch to entry-stack now */
 	movl	%ebx, %esp
 
+	/*
+	 * We came from entry-stack and need to check if we also need to
+	 * switch back to user cr3.
+	 */
+	testl	$CS_FROM_USER_CR3, PT_CS(%esp)
+	jz	.Lend_\@
+
+	/* Clear marker from stack-frame */
+	andl	$(~CS_FROM_USER_CR3), PT_CS(%esp)
+
+	SWITCH_TO_USER_CR3 scratch_reg=%eax
+
 .Lend_\@:
 .endm
 /*
@@ -712,6 +768,18 @@ ENTRY(xen_sysenter_target)
  * 0(%ebp) arg6
  */
 ENTRY(entry_SYSENTER_32)
+	/*
+	 * On entry-stack with all userspace-regs live - save and
+	 * restore eflags and %eax to use it as scratch-reg for the cr3
+	 * switch.
+	 */
+	pushfl
+	pushl	%eax
+	SWITCH_TO_KERNEL_CR3 scratch_reg=%eax
+	popl	%eax
+	popfl
+
+	/* Stack empty again, switch to task stack */
 	movl	TSS_entry_stack(%esp), %esp
 
 .Lsysenter_past_esp:
@@ -792,6 +860,9 @@ ENTRY(entry_SYSENTER_32)
 	/* Switch to entry stack */
 	movl	%eax, %esp
 
+	/* Now ready to switch the cr3 */
+	SWITCH_TO_USER_CR3 scratch_reg=%eax
+
 	/*
 	 * Restore all flags except IF. (We restore IF separately because
 	 * STI gives a one-instruction window in which we won't be interrupted,
@@ -872,7 +943,11 @@ restore_all:
 .Lrestore_all_notrace:
 	CHECK_AND_APPLY_ESPFIX
 .Lrestore_nocheck:
-	RESTORE_REGS 4				# skip orig_eax/error_code
+	/* Switch back to user CR3 */
+	SWITCH_TO_USER_CR3 scratch_reg=%eax
+
+	/* Restore user state */
+	RESTORE_REGS pop=4			# skip orig_eax/error_code
 .Lirq_return:
 	INTERRUPT_RETURN
 
-- 
2.7.4

[PATCH 14/35] x86/entry/32: Add PTI cr3 switches to NMI handler code

[Joerg Roedel]

From: Joerg Roedel <jroedel@suse.de>

The NMI handler is special, as it needs to leave with the
same cr3 as it was entered with. We need to do this because
we could enter the NMI handler from kernel code with
user-cr3 already loaded.

Signed-off-by: Joerg Roedel <jroedel@suse.de>
---
 arch/x86/entry/entry_32.S | 41 +++++++++++++++++++++++++++++++++++------
 1 file changed, 35 insertions(+), 6 deletions(-)

diff --git a/arch/x86/entry/entry_32.S b/arch/x86/entry/entry_32.S
index 86b3fe6d..0250b79 100644
--- a/arch/x86/entry/entry_32.S
+++ b/arch/x86/entry/entry_32.S
@@ -77,6 +77,8 @@
 #endif
 .endm
 
+#define PTI_SWITCH_MASK         (1 << PAGE_SHIFT)
+
 /*
  * User gs save/restore
  *
@@ -213,8 +215,19 @@
 
 .endm
 
-.macro SAVE_ALL_NMI
+.macro SAVE_ALL_NMI cr3_reg:req
 	SAVE_ALL
+
+	/*
+	 * Now switch the CR3 when PTI is enabled.
+	 *
+	 * We can enter with either user or kernel cr3, the code will
+	 * store the old cr3 in \cr3_reg and switches to the kernel cr3
+	 * if necessary.
+	 */
+	SWITCH_TO_KERNEL_CR3 scratch_reg=\cr3_reg
+
+.Lend_\@:
 .endm
 /*
  * This is a sneaky trick to help the unwinder find pt_regs on the stack.  The
@@ -262,7 +275,23 @@
 	POP_GS_EX
 .endm
 
-.macro RESTORE_ALL_NMI pop=0
+.macro RESTORE_ALL_NMI cr3_reg:req pop=0
+	/*
+	 * Now switch the CR3 when PTI is enabled.
+	 *
+	 * We enter with kernel cr3 and switch the cr3 to the value
+	 * stored on \cr3_reg, which is either a user or a kernel cr3.
+	 */
+	ALTERNATIVE "jmp .Lswitched_\@", "", X86_FEATURE_PTI
+
+	testl	$PTI_SWITCH_MASK, \cr3_reg
+	jz	.Lswitched_\@
+
+	/* User cr3 in \cr3_reg - write it to hardware cr3 */
+	movl	\cr3_reg, %cr3
+
+.Lswitched_\@:
+
 	RESTORE_REGS pop=\pop
 .endm
 
@@ -1323,7 +1352,7 @@ ENTRY(nmi)
 #endif
 
 	pushl	%eax				# pt_regs->orig_ax
-	SAVE_ALL_NMI
+	SAVE_ALL_NMI cr3_reg=%edi
 	ENCODE_FRAME_POINTER
 	xorl	%edx, %edx			# zero error code
 	movl	%esp, %eax			# pt_regs pointer
@@ -1351,7 +1380,7 @@ ENTRY(nmi)
 
 .Lnmi_return:
 	CHECK_AND_APPLY_ESPFIX
-	RESTORE_ALL_NMI pop=4
+	RESTORE_ALL_NMI cr3_reg=%edi pop=4
 	jmp	.Lirq_return
 
 #ifdef CONFIG_X86_ESPFIX32
@@ -1367,12 +1396,12 @@ ENTRY(nmi)
 	pushl	16(%esp)
 	.endr
 	pushl	%eax
-	SAVE_ALL_NMI
+	SAVE_ALL_NMI cr3_reg=%edi
 	ENCODE_FRAME_POINTER
 	FIXUP_ESPFIX_STACK			# %eax == %esp
 	xorl	%edx, %edx			# zero error code
 	call	do_nmi
-	RESTORE_ALL_NMI
+	RESTORE_ALL_NMI cr3_reg=%edi
 	lss	12+4(%esp), %esp		# back to espfix stack
 	jmp	.Lirq_return
 #endif
-- 
2.7.4

[PATCH 15/35] x86/pgtable: Rename pti_set_user_pgd to pti_set_user_pgtbl

[Joerg Roedel]

From: Joerg Roedel <jroedel@suse.de>

With the way page-table folding is implemented on 32 bit, we
are not only setting PGDs with this functions, but also PUDs
and even PMDs. Give the function a more generic name to
reflect that.

Signed-off-by: Joerg Roedel <jroedel@suse.de>
---
 arch/x86/include/asm/pgtable_64.h | 12 ++++++------
 arch/x86/mm/pti.c                 |  2 +-
 2 files changed, 7 insertions(+), 7 deletions(-)

diff --git a/arch/x86/include/asm/pgtable_64.h b/arch/x86/include/asm/pgtable_64.h
index 81462e9..b68bda5 100644
--- a/arch/x86/include/asm/pgtable_64.h
+++ b/arch/x86/include/asm/pgtable_64.h
@@ -195,21 +195,21 @@ static inline bool pgdp_maps_userspace(void *__ptr)
 }
 
 #ifdef CONFIG_PAGE_TABLE_ISOLATION
-pgd_t __pti_set_user_pgd(pgd_t *pgdp, pgd_t pgd);
+pgd_t __pti_set_user_pgtbl(pgd_t *pgdp, pgd_t pgd);
 
 /*
  * Take a PGD location (pgdp) and a pgd value that needs to be set there.
  * Populates the user and returns the resulting PGD that must be set in
  * the kernel copy of the page tables.
  */
-static inline pgd_t pti_set_user_pgd(pgd_t *pgdp, pgd_t pgd)
+static inline pgd_t pti_set_user_pgtbl(pgd_t *pgdp, pgd_t pgd)
 {
 	if (!static_cpu_has(X86_FEATURE_PTI))
 		return pgd;
-	return __pti_set_user_pgd(pgdp, pgd);
+	return __pti_set_user_pgtbl(pgdp, pgd);
 }
 #else
-static inline pgd_t pti_set_user_pgd(pgd_t *pgdp, pgd_t pgd)
+static inline pgd_t pti_set_user_pgtbl(pgd_t *pgdp, pgd_t pgd)
 {
 	return pgd;
 }
@@ -218,7 +218,7 @@ static inline pgd_t pti_set_user_pgd(pgd_t *pgdp, pgd_t pgd)
 static inline void native_set_p4d(p4d_t *p4dp, p4d_t p4d)
 {
 #if defined(CONFIG_PAGE_TABLE_ISOLATION) && !defined(CONFIG_X86_5LEVEL)
-	p4dp->pgd = pti_set_user_pgd(&p4dp->pgd, p4d.pgd);
+	p4dp->pgd = pti_set_user_pgtbl(&p4dp->pgd, p4d.pgd);
 #else
 	*p4dp = p4d;
 #endif
@@ -236,7 +236,7 @@ static inline void native_p4d_clear(p4d_t *p4d)
 static inline void native_set_pgd(pgd_t *pgdp, pgd_t pgd)
 {
 #ifdef CONFIG_PAGE_TABLE_ISOLATION
-	*pgdp = pti_set_user_pgd(pgdp, pgd);
+	*pgdp = pti_set_user_pgtbl(pgdp, pgd);
 #else
 	*pgdp = pgd;
 #endif
diff --git a/arch/x86/mm/pti.c b/arch/x86/mm/pti.c
index ce38f16..8f53d21 100644
--- a/arch/x86/mm/pti.c
+++ b/arch/x86/mm/pti.c
@@ -102,7 +102,7 @@ void __init pti_check_boottime_disable(void)
 	setup_force_cpu_cap(X86_FEATURE_PTI);
 }
 
-pgd_t __pti_set_user_pgd(pgd_t *pgdp, pgd_t pgd)
+pgd_t __pti_set_user_pgtbl(pgd_t *pgdp, pgd_t pgd)
 {
 	/*
 	 * Changes to the high (kernel) portion of the kernelmode page
-- 
2.7.4

[PATCH 16/35] x86/pgtable/pae: Unshare kernel PMDs when PTI is enabled

[Joerg Roedel]

From: Joerg Roedel <jroedel@suse.de>

With PTI we need to map the per-process LDT into the kernel
address-space for each process, so we need separate kernel
PMDs per PGD.

Signed-off-by: Joerg Roedel <jroedel@suse.de>
---
 arch/x86/include/asm/pgtable-3level_types.h | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/arch/x86/include/asm/pgtable-3level_types.h b/arch/x86/include/asm/pgtable-3level_types.h
index 876b4c7..ed8a200 100644
--- a/arch/x86/include/asm/pgtable-3level_types.h
+++ b/arch/x86/include/asm/pgtable-3level_types.h
@@ -21,9 +21,10 @@ typedef union {
 #endif	/* !__ASSEMBLY__ */
 
 #ifdef CONFIG_PARAVIRT
-#define SHARED_KERNEL_PMD	(pv_info.shared_kernel_pmd)
+#define SHARED_KERNEL_PMD	((!static_cpu_has(X86_FEATURE_PTI) &&	\
+				 (pv_info.shared_kernel_pmd)))
 #else
-#define SHARED_KERNEL_PMD	1
+#define SHARED_KERNEL_PMD	(!static_cpu_has(X86_FEATURE_PTI))
 #endif
 
 /*
-- 
2.7.4

[PATCH 17/35] x86/pgtable/32: Allocate 8k page-tables when PTI is enabled

[Joerg Roedel]

From: Joerg Roedel <jroedel@suse.de>

Allocate a kernel and a user page-table root when PTI is
enabled. Also allocate a full page per root for PAE because
otherwise the bit to flip in cr3 to switch between them
would be non-constant, which creates a lot of hassle.
Keep that for a later optimization.

Signed-off-by: Joerg Roedel <jroedel@suse.de>
---
 arch/x86/kernel/head_32.S | 20 +++++++++++++++-----
 arch/x86/mm/pgtable.c     |  5 +++--
 2 files changed, 18 insertions(+), 7 deletions(-)

diff --git a/arch/x86/kernel/head_32.S b/arch/x86/kernel/head_32.S
index c290209..1f35d60 100644
--- a/arch/x86/kernel/head_32.S
+++ b/arch/x86/kernel/head_32.S
@@ -512,11 +512,18 @@ ENTRY(initial_code)
 ENTRY(setup_once_ref)
 	.long setup_once
 
+#ifdef CONFIG_PAGE_TABLE_ISOLATION
+#define	PGD_ALIGN	(2 * PAGE_SIZE)
+#define PTI_USER_PGD_FILL	1024
+#else
+#define	PGD_ALIGN	(PAGE_SIZE)
+#define PTI_USER_PGD_FILL	0
+#endif
 /*
  * BSS section
  */
 __PAGE_ALIGNED_BSS
-	.align PAGE_SIZE
+	.align PGD_ALIGN
 #ifdef CONFIG_X86_PAE
 .globl initial_pg_pmd
 initial_pg_pmd:
@@ -526,14 +533,17 @@ initial_pg_pmd:
 initial_page_table:
 	.fill 1024,4,0
 #endif
+	.align PGD_ALIGN
 initial_pg_fixmap:
 	.fill 1024,4,0
-.globl empty_zero_page
-empty_zero_page:
-	.fill 4096,1,0
 .globl swapper_pg_dir
+	.align PGD_ALIGN
 swapper_pg_dir:
 	.fill 1024,4,0
+	.fill PTI_USER_PGD_FILL,4,0
+.globl empty_zero_page
+empty_zero_page:
+	.fill 4096,1,0
 EXPORT_SYMBOL(empty_zero_page)
 
 /*
@@ -542,7 +552,7 @@ EXPORT_SYMBOL(empty_zero_page)
 #ifdef CONFIG_X86_PAE
 __PAGE_ALIGNED_DATA
 	/* Page-aligned for the benefit of paravirt? */
-	.align PAGE_SIZE
+	.align PGD_ALIGN
 ENTRY(initial_page_table)
 	.long	pa(initial_pg_pmd+PGD_IDENT_ATTR),0	/* low identity map */
 # if KPMDS == 3
diff --git a/arch/x86/mm/pgtable.c b/arch/x86/mm/pgtable.c
index 004abf9..a81d42e 100644
--- a/arch/x86/mm/pgtable.c
+++ b/arch/x86/mm/pgtable.c
@@ -338,7 +338,8 @@ static inline pgd_t *_pgd_alloc(void)
 	 * We allocate one page for pgd.
 	 */
 	if (!SHARED_KERNEL_PMD)
-		return (pgd_t *)__get_free_page(PGALLOC_GFP);
+		return (pgd_t *)__get_free_pages(PGALLOC_GFP,
+						 PGD_ALLOCATION_ORDER);
 
 	/*
 	 * Now PAE kernel is not running as a Xen domain. We can allocate
@@ -350,7 +351,7 @@ static inline pgd_t *_pgd_alloc(void)
 static inline void _pgd_free(pgd_t *pgd)
 {
 	if (!SHARED_KERNEL_PMD)
-		free_page((unsigned long)pgd);
+		free_pages((unsigned long)pgd, PGD_ALLOCATION_ORDER);
 	else
 		kmem_cache_free(pgd_cache, pgd);
 }
-- 
2.7.4

[PATCH 18/35] x86/pgtable: Move pgdp kernel/user conversion functions to pgtable.h

[Joerg Roedel]

From: Joerg Roedel <jroedel@suse.de>

Make them available on 32 bit and clone_pgd_range() happy.

Signed-off-by: Joerg Roedel <jroedel@suse.de>
---
 arch/x86/include/asm/pgtable.h    | 49 +++++++++++++++++++++++++++++++++++++++
 arch/x86/include/asm/pgtable_64.h | 49 ---------------------------------------
 2 files changed, 49 insertions(+), 49 deletions(-)

diff --git a/arch/x86/include/asm/pgtable.h b/arch/x86/include/asm/pgtable.h
index e42b894..0a9f746 100644
--- a/arch/x86/include/asm/pgtable.h
+++ b/arch/x86/include/asm/pgtable.h
@@ -1109,6 +1109,55 @@ static inline int pud_write(pud_t pud)
 	return pud_flags(pud) & _PAGE_RW;
 }
 
+#ifdef CONFIG_PAGE_TABLE_ISOLATION
+/*
+ * All top-level PAGE_TABLE_ISOLATION page tables are order-1 pages
+ * (8k-aligned and 8k in size).  The kernel one is at the beginning 4k and
+ * the user one is in the last 4k.  To switch between them, you
+ * just need to flip the 12th bit in their addresses.
+ */
+#define PTI_PGTABLE_SWITCH_BIT	PAGE_SHIFT
+
+/*
+ * This generates better code than the inline assembly in
+ * __set_bit().
+ */
+static inline void *ptr_set_bit(void *ptr, int bit)
+{
+	unsigned long __ptr = (unsigned long)ptr;
+
+	__ptr |= BIT(bit);
+	return (void *)__ptr;
+}
+static inline void *ptr_clear_bit(void *ptr, int bit)
+{
+	unsigned long __ptr = (unsigned long)ptr;
+
+	__ptr &= ~BIT(bit);
+	return (void *)__ptr;
+}
+
+static inline pgd_t *kernel_to_user_pgdp(pgd_t *pgdp)
+{
+	return ptr_set_bit(pgdp, PTI_PGTABLE_SWITCH_BIT);
+}
+
+static inline pgd_t *user_to_kernel_pgdp(pgd_t *pgdp)
+{
+	return ptr_clear_bit(pgdp, PTI_PGTABLE_SWITCH_BIT);
+}
+
+static inline p4d_t *kernel_to_user_p4dp(p4d_t *p4dp)
+{
+	return ptr_set_bit(p4dp, PTI_PGTABLE_SWITCH_BIT);
+}
+
+static inline p4d_t *user_to_kernel_p4dp(p4d_t *p4dp)
+{
+	return ptr_clear_bit(p4dp, PTI_PGTABLE_SWITCH_BIT);
+}
+#endif /* CONFIG_PAGE_TABLE_ISOLATION */
+
 /*
  * clone_pgd_range(pgd_t *dst, pgd_t *src, int count);
  *
diff --git a/arch/x86/include/asm/pgtable_64.h b/arch/x86/include/asm/pgtable_64.h
index b68bda5..5e68083 100644
--- a/arch/x86/include/asm/pgtable_64.h
+++ b/arch/x86/include/asm/pgtable_64.h
@@ -131,55 +131,6 @@ static inline pud_t native_pudp_get_and_clear(pud_t *xp)
 #endif
 }
 
-#ifdef CONFIG_PAGE_TABLE_ISOLATION
-/*
- * All top-level PAGE_TABLE_ISOLATION page tables are order-1 pages
- * (8k-aligned and 8k in size).  The kernel one is at the beginning 4k and
- * the user one is in the last 4k.  To switch between them, you
- * just need to flip the 12th bit in their addresses.
- */
-#define PTI_PGTABLE_SWITCH_BIT	PAGE_SHIFT
-
-/*
- * This generates better code than the inline assembly in
- * __set_bit().
- */
-static inline void *ptr_set_bit(void *ptr, int bit)
-{
-	unsigned long __ptr = (unsigned long)ptr;
-
-	__ptr |= BIT(bit);
-	return (void *)__ptr;
-}
-static inline void *ptr_clear_bit(void *ptr, int bit)
-{
-	unsigned long __ptr = (unsigned long)ptr;
-
-	__ptr &= ~BIT(bit);
-	return (void *)__ptr;
-}
-
-static inline pgd_t *kernel_to_user_pgdp(pgd_t *pgdp)
-{
-	return ptr_set_bit(pgdp, PTI_PGTABLE_SWITCH_BIT);
-}
-
-static inline pgd_t *user_to_kernel_pgdp(pgd_t *pgdp)
-{
-	return ptr_clear_bit(pgdp, PTI_PGTABLE_SWITCH_BIT);
-}
-
-static inline p4d_t *kernel_to_user_p4dp(p4d_t *p4dp)
-{
-	return ptr_set_bit(p4dp, PTI_PGTABLE_SWITCH_BIT);
-}
-
-static inline p4d_t *user_to_kernel_p4dp(p4d_t *p4dp)
-{
-	return ptr_clear_bit(p4dp, PTI_PGTABLE_SWITCH_BIT);
-}
-#endif /* CONFIG_PAGE_TABLE_ISOLATION */
-
 /*
  * Page table pages are page-aligned.  The lower half of the top
  * level is used for userspace and the top half for the kernel.
-- 
2.7.4

[PATCH 19/35] x86/pgtable: Move pti_set_user_pgtbl() to pgtable.h

[Joerg Roedel]

From: Joerg Roedel <jroedel@suse.de>

There it is also usable from 32 bit code.

Signed-off-by: Joerg Roedel <jroedel@suse.de>
---
 arch/x86/include/asm/pgtable.h    | 23 +++++++++++++++++++++++
 arch/x86/include/asm/pgtable_64.h | 21 ---------------------
 2 files changed, 23 insertions(+), 21 deletions(-)

diff --git a/arch/x86/include/asm/pgtable.h b/arch/x86/include/asm/pgtable.h
index 0a9f746..1e900c1 100644
--- a/arch/x86/include/asm/pgtable.h
+++ b/arch/x86/include/asm/pgtable.h
@@ -618,8 +618,31 @@ static inline int is_new_memtype_allowed(u64 paddr, unsigned long size,
 
 pmd_t *populate_extra_pmd(unsigned long vaddr);
 pte_t *populate_extra_pte(unsigned long vaddr);
+
+#ifdef CONFIG_PAGE_TABLE_ISOLATION
+pgd_t __pti_set_user_pgtbl(pgd_t *pgdp, pgd_t pgd);
+
+/*
+ * Take a PGD location (pgdp) and a pgd value that needs to be set there.
+ * Populates the user and returns the resulting PGD that must be set in
+ * the kernel copy of the page tables.
+ */
+static inline pgd_t pti_set_user_pgtbl(pgd_t *pgdp, pgd_t pgd)
+{
+	if (!static_cpu_has(X86_FEATURE_PTI))
+		return pgd;
+	return __pti_set_user_pgtbl(pgdp, pgd);
+}
+#else   /* CONFIG_PAGE_TABLE_ISOLATION */
+static inline pgd_t pti_set_user_pgtbl(pgd_t *pgdp, pgd_t pgd)
+{
+	return pgd;
+}
+#endif  /* CONFIG_PAGE_TABLE_ISOLATION */
+
 #endif	/* __ASSEMBLY__ */
 
+
 #ifdef CONFIG_X86_32
 # include <asm/pgtable_32.h>
 #else
diff --git a/arch/x86/include/asm/pgtable_64.h b/arch/x86/include/asm/pgtable_64.h
index 5e68083..4cbf517 100644
--- a/arch/x86/include/asm/pgtable_64.h
+++ b/arch/x86/include/asm/pgtable_64.h
@@ -145,27 +145,6 @@ static inline bool pgdp_maps_userspace(void *__ptr)
 	return (ptr & ~PAGE_MASK) < (PAGE_SIZE / 2);
 }
 
-#ifdef CONFIG_PAGE_TABLE_ISOLATION
-pgd_t __pti_set_user_pgtbl(pgd_t *pgdp, pgd_t pgd);
-
-/*
- * Take a PGD location (pgdp) and a pgd value that needs to be set there.
- * Populates the user and returns the resulting PGD that must be set in
- * the kernel copy of the page tables.
- */
-static inline pgd_t pti_set_user_pgtbl(pgd_t *pgdp, pgd_t pgd)
-{
-	if (!static_cpu_has(X86_FEATURE_PTI))
-		return pgd;
-	return __pti_set_user_pgtbl(pgdp, pgd);
-}
-#else
-static inline pgd_t pti_set_user_pgtbl(pgd_t *pgdp, pgd_t pgd)
-{
-	return pgd;
-}
-#endif
-
 static inline void native_set_p4d(p4d_t *p4dp, p4d_t p4d)
 {
 #if defined(CONFIG_PAGE_TABLE_ISOLATION) && !defined(CONFIG_X86_5LEVEL)
-- 
2.7.4

[PATCH 20/35] x86/pgtable: Move two more functions from pgtable_64.h to pgtable.h

[Joerg Roedel]

From: Joerg Roedel <jroedel@suse.de>

These two functions are required for PTI on 32 bit:

	* pgdp_maps_userspace()
	* pgd_large()

Also re-implement pgdp_maps_userspace() so that it will work
on 64 and 32 bit kernels.

Signed-off-by: Joerg Roedel <jroedel@suse.de>
---
 arch/x86/include/asm/pgtable-2level_types.h |  3 +++
 arch/x86/include/asm/pgtable-3level_types.h |  1 +
 arch/x86/include/asm/pgtable.h              | 16 ++++++++++++++++
 arch/x86/include/asm/pgtable_64.h           | 15 ---------------
 arch/x86/include/asm/pgtable_64_types.h     |  2 ++
 5 files changed, 22 insertions(+), 15 deletions(-)

diff --git a/arch/x86/include/asm/pgtable-2level_types.h b/arch/x86/include/asm/pgtable-2level_types.h
index f982ef8..6deb6cd 100644
--- a/arch/x86/include/asm/pgtable-2level_types.h
+++ b/arch/x86/include/asm/pgtable-2level_types.h
@@ -35,4 +35,7 @@ typedef union {
 
 #define PTRS_PER_PTE	1024
 
+/* This covers all VMSPLIT_* and VMSPLIT_*_OPT variants */
+#define PGD_KERNEL_START	(CONFIG_PAGE_OFFSET >> PGDIR_SHIFT)
+
 #endif /* _ASM_X86_PGTABLE_2LEVEL_DEFS_H */
diff --git a/arch/x86/include/asm/pgtable-3level_types.h b/arch/x86/include/asm/pgtable-3level_types.h
index ed8a200..925ac1b 100644
--- a/arch/x86/include/asm/pgtable-3level_types.h
+++ b/arch/x86/include/asm/pgtable-3level_types.h
@@ -45,5 +45,6 @@ typedef union {
  */
 #define PTRS_PER_PTE	512
 
+#define PGD_KERNEL_START	(CONFIG_PAGE_OFFSET >> PGDIR_SHIFT)
 
 #endif /* _ASM_X86_PGTABLE_3LEVEL_DEFS_H */
diff --git a/arch/x86/include/asm/pgtable.h b/arch/x86/include/asm/pgtable.h
index 1e900c1..981e49a 100644
--- a/arch/x86/include/asm/pgtable.h
+++ b/arch/x86/include/asm/pgtable.h
@@ -1132,6 +1132,22 @@ static inline int pud_write(pud_t pud)
 	return pud_flags(pud) & _PAGE_RW;
 }
 
+/*
+ * Page table pages are page-aligned.  The lower half of the top
+ * level is used for userspace and the top half for the kernel.
+ *
+ * Returns true for parts of the PGD that map userspace and
+ * false for the parts that map the kernel.
+ */
+static inline bool pgdp_maps_userspace(void *__ptr)
+{
+	unsigned long ptr = (unsigned long)__ptr;
+
+	return (((ptr & ~PAGE_MASK) / sizeof(pgd_t)) < PGD_KERNEL_START);
+}
+
+static inline int pgd_large(pgd_t pgd) { return 0; }
+
 #ifdef CONFIG_PAGE_TABLE_ISOLATION
 /*
  * All top-level PAGE_TABLE_ISOLATION page tables are order-1 pages
diff --git a/arch/x86/include/asm/pgtable_64.h b/arch/x86/include/asm/pgtable_64.h
index 4cbf517..e11b925 100644
--- a/arch/x86/include/asm/pgtable_64.h
+++ b/arch/x86/include/asm/pgtable_64.h
@@ -131,20 +131,6 @@ static inline pud_t native_pudp_get_and_clear(pud_t *xp)
 #endif
 }
 
-/*
- * Page table pages are page-aligned.  The lower half of the top
- * level is used for userspace and the top half for the kernel.
- *
- * Returns true for parts of the PGD that map userspace and
- * false for the parts that map the kernel.
- */
-static inline bool pgdp_maps_userspace(void *__ptr)
-{
-	unsigned long ptr = (unsigned long)__ptr;
-
-	return (ptr & ~PAGE_MASK) < (PAGE_SIZE / 2);
-}
-
 static inline void native_set_p4d(p4d_t *p4dp, p4d_t p4d)
 {
 #if defined(CONFIG_PAGE_TABLE_ISOLATION) && !defined(CONFIG_X86_5LEVEL)
@@ -187,7 +173,6 @@ extern void sync_global_pgds(unsigned long start, unsigned long end);
 /*
  * Level 4 access.
  */
-static inline int pgd_large(pgd_t pgd) { return 0; }
 #define mk_kernel_pgd(address) __pgd((address) | _KERNPG_TABLE)
 
 /* PUD - Level3 access */
diff --git a/arch/x86/include/asm/pgtable_64_types.h b/arch/x86/include/asm/pgtable_64_types.h
index 6b8f73d..e57003a 100644
--- a/arch/x86/include/asm/pgtable_64_types.h
+++ b/arch/x86/include/asm/pgtable_64_types.h
@@ -124,4 +124,6 @@ typedef struct { pteval_t pte; } pte_t;
 
 #define EARLY_DYNAMIC_PAGE_TABLES	64
 
+#define PGD_KERNEL_START	((PAGE_SIZE / 2) / sizeof(pgd_t))
+
 #endif /* _ASM_X86_PGTABLE_64_DEFS_H */
-- 
2.7.4

[PATCH 21/35] x86/mm/pae: Populate valid user PGD entries

[Joerg Roedel]

From: Joerg Roedel <jroedel@suse.de>

Generic page-table code populates all non-leaf entries with
_KERNPG_TABLE bits set. This is fine for all paging modes
except PAE.

In PAE mode only a subset of the bits is allowed to be set.
Make sure we only set allowed bits by masking out the
reserved bits.

Signed-off-by: Joerg Roedel <jroedel@suse.de>
---
 arch/x86/include/asm/pgtable_types.h | 28 ++++++++++++++++++++++++++--
 1 file changed, 26 insertions(+), 2 deletions(-)

diff --git a/arch/x86/include/asm/pgtable_types.h b/arch/x86/include/asm/pgtable_types.h
index 3696398..48fc70b 100644
--- a/arch/x86/include/asm/pgtable_types.h
+++ b/arch/x86/include/asm/pgtable_types.h
@@ -50,6 +50,7 @@
 #define _PAGE_GLOBAL	(_AT(pteval_t, 1) << _PAGE_BIT_GLOBAL)
 #define _PAGE_SOFTW1	(_AT(pteval_t, 1) << _PAGE_BIT_SOFTW1)
 #define _PAGE_SOFTW2	(_AT(pteval_t, 1) << _PAGE_BIT_SOFTW2)
+#define _PAGE_SOFTW3	(_AT(pteval_t, 1) << _PAGE_BIT_SOFTW3)
 #define _PAGE_PAT	(_AT(pteval_t, 1) << _PAGE_BIT_PAT)
 #define _PAGE_PAT_LARGE (_AT(pteval_t, 1) << _PAGE_BIT_PAT_LARGE)
 #define _PAGE_SPECIAL	(_AT(pteval_t, 1) << _PAGE_BIT_SPECIAL)
@@ -267,14 +268,37 @@ typedef struct pgprot { pgprotval_t pgprot; } pgprot_t;
 
 typedef struct { pgdval_t pgd; } pgd_t;
 
+#ifdef CONFIG_X86_PAE
+
+/*
+ * PHYSICAL_PAGE_MASK might be non-constant when SME is compiled in, so we can't
+ * use it here.
+ */
+
+#define PGD_PAE_PAGE_MASK	((signed long)PAGE_MASK)
+#define PGD_PAE_PHYS_MASK	(((1ULL << __PHYSICAL_MASK_SHIFT)-1) & PGD_PAE_PAGE_MASK)
+
+/*
+ * PAE allows Base Address, P, PWT, PCD and AVL bits to be set in PGD entries.
+ * All other bits are Reserved MBZ
+ */
+#define PGD_ALLOWED_BITS	(PGD_PAE_PHYS_MASK | _PAGE_PRESENT | \
+				 _PAGE_PWT | _PAGE_PCD | \
+				 _PAGE_SOFTW1 | _PAGE_SOFTW2 | _PAGE_SOFTW3 )
+
+#else
+/* No need to mask any bits for !PAE */
+#define PGD_ALLOWED_BITS	(~0ULL)
+#endif
+
 static inline pgd_t native_make_pgd(pgdval_t val)
 {
-	return (pgd_t) { val };
+	return (pgd_t) { val & PGD_ALLOWED_BITS };
 }
 
 static inline pgdval_t native_pgd_val(pgd_t pgd)
 {
-	return pgd.pgd;
+	return pgd.pgd & PGD_ALLOWED_BITS;
 }
 
 static inline pgdval_t pgd_flags(pgd_t pgd)
-- 
2.7.4

[PATCH 22/35] x86/mm/pae: Populate the user page-table with user pgd's

[Joerg Roedel]

From: Joerg Roedel <jroedel@suse.de>

When we populate a PGD entry, make sure we populate it in
the user page-table too.

Signed-off-by: Joerg Roedel <jroedel@suse.de>
---
 arch/x86/include/asm/pgtable-3level.h | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/arch/x86/include/asm/pgtable-3level.h b/arch/x86/include/asm/pgtable-3level.h
index bc4af54..ab2aa44 100644
--- a/arch/x86/include/asm/pgtable-3level.h
+++ b/arch/x86/include/asm/pgtable-3level.h
@@ -98,6 +98,9 @@ static inline void native_set_pmd(pmd_t *pmdp, pmd_t pmd)
 
 static inline void native_set_pud(pud_t *pudp, pud_t pud)
 {
+#ifdef CONFIG_PAGE_TABLE_ISOLATION
+	pud.p4d.pgd = pti_set_user_pgtbl(&pudp->p4d.pgd, pud.p4d.pgd);
+#endif
 	set_64bit((unsigned long long *)(pudp), native_pud_val(pud));
 }
 
@@ -194,6 +197,10 @@ static inline pud_t native_pudp_get_and_clear(pud_t *pudp)
 {
 	union split_pud res, *orig = (union split_pud *)pudp;
 
+#ifdef CONFIG_PAGE_TABLE_ISOLATION
+	pti_set_user_pgtbl(&pudp->p4d.pgd, __pgd(0));
+#endif
+
 	/* xchg acts as a barrier before setting of the high bits */
 	res.pud_low = xchg(&orig->pud_low, 0);
 	res.pud_high = orig->pud_high;
-- 
2.7.4

[PATCH 23/35] x86/mm/legacy: Populate the user page-table with user pgd's

[Joerg Roedel]

From: Joerg Roedel <jroedel@suse.de>

Also populate the user-spage pgd's in the user page-table.

Signed-off-by: Joerg Roedel <jroedel@suse.de>
---
 arch/x86/include/asm/pgtable-2level.h | 9 +++++++++
 1 file changed, 9 insertions(+)

diff --git a/arch/x86/include/asm/pgtable-2level.h b/arch/x86/include/asm/pgtable-2level.h
index 685ffe8..c399ea5 100644
--- a/arch/x86/include/asm/pgtable-2level.h
+++ b/arch/x86/include/asm/pgtable-2level.h
@@ -19,6 +19,9 @@ static inline void native_set_pte(pte_t *ptep , pte_t pte)
 
 static inline void native_set_pmd(pmd_t *pmdp, pmd_t pmd)
 {
+#ifdef CONFIG_PAGE_TABLE_ISOLATION
+	pmd.pud.p4d.pgd = pti_set_user_pgtbl(&pmdp->pud.p4d.pgd, pmd.pud.p4d.pgd);
+#endif
 	*pmdp = pmd;
 }
 
@@ -58,6 +61,9 @@ static inline pte_t native_ptep_get_and_clear(pte_t *xp)
 #ifdef CONFIG_SMP
 static inline pmd_t native_pmdp_get_and_clear(pmd_t *xp)
 {
+#ifdef CONFIG_PAGE_TABLE_ISOLATION
+	pti_set_user_pgtbl(&xp->pud.p4d.pgd, __pgd(0));
+#endif
 	return __pmd(xchg((pmdval_t *)xp, 0));
 }
 #else
@@ -67,6 +73,9 @@ static inline pmd_t native_pmdp_get_and_clear(pmd_t *xp)
 #ifdef CONFIG_SMP
 static inline pud_t native_pudp_get_and_clear(pud_t *xp)
 {
+#ifdef CONFIG_PAGE_TABLE_ISOLATION
+	pti_set_user_pgtbl(&xp->p4d.pgd, __pgd(0));
+#endif
 	return __pud(xchg((pudval_t *)xp, 0));
 }
 #else
-- 
2.7.4

[PATCH 24/35] x86/mm/pti: Add an overflow check to pti_clone_pmds()

[Joerg Roedel]

From: Joerg Roedel <jroedel@suse.de>

The addr counter will overflow if we clone the last PMD of
the address space, resulting in an endless loop.

Check for that and bail out of the loop when it happens.

Signed-off-by: Joerg Roedel <jroedel@suse.de>
---
 arch/x86/mm/pti.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/arch/x86/mm/pti.c b/arch/x86/mm/pti.c
index 8f53d21..96a690e 100644
--- a/arch/x86/mm/pti.c
+++ b/arch/x86/mm/pti.c
@@ -282,6 +282,10 @@ pti_clone_pmds(unsigned long start, unsigned long end, pmdval_t clear)
 		p4d_t *p4d;
 		pud_t *pud;
 
+		/* Overflow check */
+		if (addr < start)
+			break;
+
 		pgd = pgd_offset_k(addr);
 		if (WARN_ON(pgd_none(*pgd)))
 			return;
-- 
2.7.4

[PATCH 25/35] x86/mm/pti: Define X86_CR3_PTI_PCID_USER_BIT on x86_32

[Joerg Roedel]

From: Joerg Roedel <jroedel@suse.de>

Move it out of the X86_64 specific processor defines so
that its visible for 32bit too.

Reviewed-by: Andy Lutomirski <luto@kernel.org>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
---
 arch/x86/include/asm/processor-flags.h | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/arch/x86/include/asm/processor-flags.h b/arch/x86/include/asm/processor-flags.h
index 625a52a..02c2cbd 100644
--- a/arch/x86/include/asm/processor-flags.h
+++ b/arch/x86/include/asm/processor-flags.h
@@ -39,10 +39,6 @@
 #define CR3_PCID_MASK	0xFFFull
 #define CR3_NOFLUSH	BIT_ULL(63)
 
-#ifdef CONFIG_PAGE_TABLE_ISOLATION
-# define X86_CR3_PTI_PCID_USER_BIT	11
-#endif
-
 #else
 /*
  * CR3_ADDR_MASK needs at least bits 31:5 set on PAE systems, and we save
@@ -53,4 +49,8 @@
 #define CR3_NOFLUSH	0
 #endif
 
+#ifdef CONFIG_PAGE_TABLE_ISOLATION
+# define X86_CR3_PTI_PCID_USER_BIT	11
+#endif
+
 #endif /* _ASM_X86_PROCESSOR_FLAGS_H */
-- 
2.7.4

[PATCH 26/35] x86/mm/pti: Clone CPU_ENTRY_AREA on PMD level on x86_32

[Joerg Roedel]

From: Joerg Roedel <jroedel@suse.de>

Cloning on the P4D level would clone the complete kernel
address space into the user-space page-tables for PAE
kernels. Cloning on PMD level is fine for PAE and legacy
paging.

Signed-off-by: Joerg Roedel <jroedel@suse.de>
---
 arch/x86/mm/pti.c | 20 ++++++++++++++++++++
 1 file changed, 20 insertions(+)

diff --git a/arch/x86/mm/pti.c b/arch/x86/mm/pti.c
index 96a690e..3ffd923 100644
--- a/arch/x86/mm/pti.c
+++ b/arch/x86/mm/pti.c
@@ -312,6 +312,7 @@ pti_clone_pmds(unsigned long start, unsigned long end, pmdval_t clear)
 	}
 }
 
+#ifdef CONFIG_X86_64
 /*
  * Clone a single p4d (i.e. a top-level entry on 4-level systems and a
  * next-level entry on 5-level systems.
@@ -335,6 +336,25 @@ static void __init pti_clone_user_shared(void)
 	pti_clone_p4d(CPU_ENTRY_AREA_BASE);
 }
 
+#else /* CONFIG_X86_64 */
+
+/*
+ * On 32 bit PAE systems with 1GB of Kernel address space there is only
+ * one pgd/p4d for the whole kernel. Cloning that would map the whole
+ * address space into the user page-tables, making PTI useless. So clone
+ * the page-table on the PMD level to prevent that.
+ */
+static void __init pti_clone_user_shared(void)
+{
+	unsigned long start, end;
+
+	start = CPU_ENTRY_AREA_BASE;
+	end   = start + (PAGE_SIZE * CPU_ENTRY_AREA_PAGES);
+
+	pti_clone_pmds(start, end, _PAGE_GLOBAL);
+}
+#endif /* CONFIG_X86_64 */
+
 /*
  * Clone the ESPFIX P4D into the user space visinble page table
  */
-- 
2.7.4

[PATCH 27/35] x86/mm/dump_pagetables: Define INIT_PGD

[Joerg Roedel]

From: Joerg Roedel <jroedel@suse.de>

Define INIT_PGD to point to the correct initial page-table
for 32 and 64 bit and use it where needed. This fixes the
build on 32 bit with CONFIG_PAGE_TABLE_ISOLATION enabled.

Signed-off-by: Joerg Roedel <jroedel@suse.de>
---
 arch/x86/mm/dump_pagetables.c | 12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)

diff --git a/arch/x86/mm/dump_pagetables.c b/arch/x86/mm/dump_pagetables.c
index 2a4849e..2151ebb 100644
--- a/arch/x86/mm/dump_pagetables.c
+++ b/arch/x86/mm/dump_pagetables.c
@@ -105,6 +105,8 @@ static struct addr_marker address_markers[] = {
 	[END_OF_SPACE_NR]	= { -1,			NULL }
 };
 
+#define INIT_PGD	((pgd_t *) &init_top_pgt)
+
 #else /* CONFIG_X86_64 */
 
 enum address_markers_idx {
@@ -133,6 +135,8 @@ static struct addr_marker address_markers[] = {
 	[END_OF_SPACE_NR]	= { -1,			NULL }
 };
 
+#define INIT_PGD	(swapper_pg_dir)
+
 #endif /* !CONFIG_X86_64 */
 
 /* Multipliers for offsets within the PTEs */
@@ -478,11 +482,7 @@ static inline bool is_hypervisor_range(int idx)
 static void ptdump_walk_pgd_level_core(struct seq_file *m, pgd_t *pgd,
 				       bool checkwx, bool dmesg)
 {
-#ifdef CONFIG_X86_64
-	pgd_t *start = (pgd_t *) &init_top_pgt;
-#else
-	pgd_t *start = swapper_pg_dir;
-#endif
+	pgd_t *start = INIT_PGD;
 	pgprotval_t prot;
 	int i;
 	struct pg_state st = {};
@@ -543,7 +543,7 @@ EXPORT_SYMBOL_GPL(ptdump_walk_pgd_level_debugfs);
 static void ptdump_walk_user_pgd_level_checkwx(void)
 {
 #ifdef CONFIG_PAGE_TABLE_ISOLATION
-	pgd_t *pgd = (pgd_t *) &init_top_pgt;
+	pgd_t *pgd = INIT_PGD;
 
 	if (!static_cpu_has(X86_FEATURE_PTI))
 		return;
-- 
2.7.4

[PATCH 28/35] x86/pgtable/pae: Use separate kernel PMDs for user page-table

[Joerg Roedel]

From: Joerg Roedel <jroedel@suse.de>

We need separate kernel PMDs in the user page-table when PTI
is enabled to map the per-process LDT for user-space.

Signed-off-by: Joerg Roedel <jroedel@suse.de>
---
 arch/x86/mm/pgtable.c | 100 ++++++++++++++++++++++++++++++++++++++++----------
 1 file changed, 81 insertions(+), 19 deletions(-)

diff --git a/arch/x86/mm/pgtable.c b/arch/x86/mm/pgtable.c
index a81d42e..d95bc7b 100644
--- a/arch/x86/mm/pgtable.c
+++ b/arch/x86/mm/pgtable.c
@@ -177,6 +177,14 @@ static void pgd_dtor(pgd_t *pgd)
  */
 #define PREALLOCATED_PMDS	UNSHARED_PTRS_PER_PGD
 
+/*
+ * We allocate separate PMDs for the kernel part of the user page-table
+ * when PTI is enabled. We need them to map the per-process LDT into the
+ * user-space page-table.
+ */
+#define PREALLOCATED_USER_PMDS	 (static_cpu_has(X86_FEATURE_PTI) ? \
+					KERNEL_PGD_PTRS : 0)
+
 void pud_populate(struct mm_struct *mm, pud_t *pudp, pmd_t *pmd)
 {
 	paravirt_alloc_pmd(mm, __pa(pmd) >> PAGE_SHIFT);
@@ -197,14 +205,14 @@ void pud_populate(struct mm_struct *mm, pud_t *pudp, pmd_t *pmd)
 
 /* No need to prepopulate any pagetable entries in non-PAE modes. */
 #define PREALLOCATED_PMDS	0
-
+#define PREALLOCATED_USER_PMDS	 0
 #endif	/* CONFIG_X86_PAE */
 
-static void free_pmds(struct mm_struct *mm, pmd_t *pmds[])
+static void free_pmds(struct mm_struct *mm, pmd_t *pmds[], int count)
 {
 	int i;
 
-	for(i = 0; i < PREALLOCATED_PMDS; i++)
+	for(i = 0; i < count; i++)
 		if (pmds[i]) {
 			pgtable_pmd_page_dtor(virt_to_page(pmds[i]));
 			free_page((unsigned long)pmds[i]);
@@ -212,7 +220,7 @@ static void free_pmds(struct mm_struct *mm, pmd_t *pmds[])
 		}
 }
 
-static int preallocate_pmds(struct mm_struct *mm, pmd_t *pmds[])
+static int preallocate_pmds(struct mm_struct *mm, pmd_t *pmds[], int count)
 {
 	int i;
 	bool failed = false;
@@ -221,7 +229,7 @@ static int preallocate_pmds(struct mm_struct *mm, pmd_t *pmds[])
 	if (mm == &init_mm)
 		gfp &= ~__GFP_ACCOUNT;
 
-	for(i = 0; i < PREALLOCATED_PMDS; i++) {
+	for(i = 0; i < count; i++) {
 		pmd_t *pmd = (pmd_t *)__get_free_page(gfp);
 		if (!pmd)
 			failed = true;
@@ -236,7 +244,7 @@ static int preallocate_pmds(struct mm_struct *mm, pmd_t *pmds[])
 	}
 
 	if (failed) {
-		free_pmds(mm, pmds);
+		free_pmds(mm, pmds, count);
 		return -ENOMEM;
 	}
 
@@ -249,23 +257,38 @@ static int preallocate_pmds(struct mm_struct *mm, pmd_t *pmds[])
  * preallocate which never got a corresponding vma will need to be
  * freed manually.
  */
+static void mop_up_one_pmd(struct mm_struct *mm, pgd_t *pgdp)
+{
+	pgd_t pgd = *pgdp;
+
+	if (pgd_val(pgd) != 0) {
+		pmd_t *pmd = (pmd_t *)pgd_page_vaddr(pgd);
+
+		*pgdp = native_make_pgd(0);
+
+		paravirt_release_pmd(pgd_val(pgd) >> PAGE_SHIFT);
+		pmd_free(mm, pmd);
+		mm_dec_nr_pmds(mm);
+	}
+}
+
 static void pgd_mop_up_pmds(struct mm_struct *mm, pgd_t *pgdp)
 {
 	int i;
 
-	for(i = 0; i < PREALLOCATED_PMDS; i++) {
-		pgd_t pgd = pgdp[i];
+	for(i = 0; i < PREALLOCATED_PMDS; i++)
+		mop_up_one_pmd(mm, &pgdp[i]);
 
-		if (pgd_val(pgd) != 0) {
-			pmd_t *pmd = (pmd_t *)pgd_page_vaddr(pgd);
+#ifdef CONFIG_PAGE_TABLE_ISOLATION
 
-			pgdp[i] = native_make_pgd(0);
+	if (!static_cpu_has(X86_FEATURE_PTI))
+		return;
 
-			paravirt_release_pmd(pgd_val(pgd) >> PAGE_SHIFT);
-			pmd_free(mm, pmd);
-			mm_dec_nr_pmds(mm);
-		}
-	}
+	pgdp = kernel_to_user_pgdp(pgdp);
+
+	for (i = 0; i < PREALLOCATED_USER_PMDS; i++)
+		mop_up_one_pmd(mm, &pgdp[i + KERNEL_PGD_BOUNDARY]);
+#endif
 }
 
 static void pgd_prepopulate_pmd(struct mm_struct *mm, pgd_t *pgd, pmd_t *pmds[])
@@ -291,6 +314,38 @@ static void pgd_prepopulate_pmd(struct mm_struct *mm, pgd_t *pgd, pmd_t *pmds[])
 	}
 }
 
+#ifdef CONFIG_PAGE_TABLE_ISOLATION
+static void pgd_prepopulate_user_pmd(struct mm_struct *mm,
+				     pgd_t *k_pgd, pmd_t *pmds[])
+{
+	pgd_t *s_pgd = kernel_to_user_pgdp(swapper_pg_dir);
+	pgd_t *u_pgd = kernel_to_user_pgdp(k_pgd);
+	p4d_t *u_p4d;
+	pud_t *u_pud;
+	int i;
+
+	u_p4d = p4d_offset(u_pgd, 0);
+	u_pud = pud_offset(u_p4d, 0);
+
+	s_pgd += KERNEL_PGD_BOUNDARY;
+	u_pud += KERNEL_PGD_BOUNDARY;
+
+	for (i = 0; i < PREALLOCATED_USER_PMDS; i++, u_pud++, s_pgd++) {
+		pmd_t *pmd = pmds[i];
+
+		memcpy(pmd, (pmd_t *)pgd_page_vaddr(*s_pgd),
+		       sizeof(pmd_t) * PTRS_PER_PMD);
+
+		pud_populate(mm, u_pud, pmd);
+	}
+
+}
+#else
+static void pgd_prepopulate_user_pmd(struct mm_struct *mm,
+				     pgd_t *k_pgd, pmd_t *pmds[])
+{
+}
+#endif
 /*
  * Xen paravirt assumes pgd table should be in one page. 64 bit kernel also
  * assumes that pgd should be in one page.
@@ -371,6 +426,7 @@ static inline void _pgd_free(pgd_t *pgd)
 pgd_t *pgd_alloc(struct mm_struct *mm)
 {
 	pgd_t *pgd;
+	pmd_t *u_pmds[PREALLOCATED_USER_PMDS];
 	pmd_t *pmds[PREALLOCATED_PMDS];
 
 	pgd = _pgd_alloc();
@@ -380,12 +436,15 @@ pgd_t *pgd_alloc(struct mm_struct *mm)
 
 	mm->pgd = pgd;
 
-	if (preallocate_pmds(mm, pmds) != 0)
+	if (preallocate_pmds(mm, pmds, PREALLOCATED_PMDS) != 0)
 		goto out_free_pgd;
 
-	if (paravirt_pgd_alloc(mm) != 0)
+	if (preallocate_pmds(mm, u_pmds, PREALLOCATED_USER_PMDS) != 0)
 		goto out_free_pmds;
 
+	if (paravirt_pgd_alloc(mm) != 0)
+		goto out_free_user_pmds;
+
 	/*
 	 * Make sure that pre-populating the pmds is atomic with
 	 * respect to anything walking the pgd_list, so that they
@@ -395,13 +454,16 @@ pgd_t *pgd_alloc(struct mm_struct *mm)
 
 	pgd_ctor(mm, pgd);
 	pgd_prepopulate_pmd(mm, pgd, pmds);
+	pgd_prepopulate_user_pmd(mm, pgd, u_pmds);
 
 	spin_unlock(&pgd_lock);
 
 	return pgd;
 
+out_free_user_pmds:
+	free_pmds(mm, u_pmds, PREALLOCATED_USER_PMDS);
 out_free_pmds:
-	free_pmds(mm, pmds);
+	free_pmds(mm, pmds, PREALLOCATED_PMDS);
 out_free_pgd:
 	_pgd_free(pgd);
 out:
-- 
2.7.4

[PATCH 29/35] x86/ldt: Reserve address-space range on 32 bit for the LDT

[Joerg Roedel]

From: Joerg Roedel <jroedel@suse.de>

Reserve 2MB/4MB of address-space for mapping the LDT to
user-space on 32 bit PTI kernels.

Signed-off-by: Joerg Roedel <jroedel@suse.de>
---
 arch/x86/include/asm/pgtable_32_types.h | 7 +++++--
 arch/x86/mm/dump_pagetables.c           | 9 +++++++++
 2 files changed, 14 insertions(+), 2 deletions(-)

diff --git a/arch/x86/include/asm/pgtable_32_types.h b/arch/x86/include/asm/pgtable_32_types.h
index 0777e18..eb2e97a 100644
--- a/arch/x86/include/asm/pgtable_32_types.h
+++ b/arch/x86/include/asm/pgtable_32_types.h
@@ -48,13 +48,16 @@ extern bool __vmalloc_start_set; /* set once high_memory is set */
 	((FIXADDR_TOT_START - PAGE_SIZE * (CPU_ENTRY_AREA_PAGES + 1))   \
 	 & PMD_MASK)
 
-#define PKMAP_BASE		\
+#define LDT_BASE_ADDR		\
 	((CPU_ENTRY_AREA_BASE - PAGE_SIZE) & PMD_MASK)
 
+#define PKMAP_BASE		\
+	((LDT_BASE_ADDR - PAGE_SIZE) & PMD_MASK)
+
 #ifdef CONFIG_HIGHMEM
 # define VMALLOC_END	(PKMAP_BASE - 2 * PAGE_SIZE)
 #else
-# define VMALLOC_END	(CPU_ENTRY_AREA_BASE - 2 * PAGE_SIZE)
+# define VMALLOC_END	(LDT_BASE_ADDR - 2 * PAGE_SIZE)
 #endif
 
 #define MODULES_VADDR	VMALLOC_START
diff --git a/arch/x86/mm/dump_pagetables.c b/arch/x86/mm/dump_pagetables.c
index 2151ebb..fdefdf0 100644
--- a/arch/x86/mm/dump_pagetables.c
+++ b/arch/x86/mm/dump_pagetables.c
@@ -117,6 +117,9 @@ enum address_markers_idx {
 #ifdef CONFIG_HIGHMEM
 	PKMAP_BASE_NR,
 #endif
+#ifdef CONFIG_MODIFY_LDT_SYSCALL
+	LDT_NR,
+#endif
 	CPU_ENTRY_AREA_NR,
 	FIXADDR_START_NR,
 	END_OF_SPACE_NR,
@@ -130,6 +133,9 @@ static struct addr_marker address_markers[] = {
 #ifdef CONFIG_HIGHMEM
 	[PKMAP_BASE_NR]		= { 0UL,		"Persistent kmap() Area" },
 #endif
+#ifdef CONFIG_MODIFY_LDT_SYSCALL
+	[LDT_NR]		= { 0UL,		"LDT remap" },
+#endif
 	[CPU_ENTRY_AREA_NR]	= { 0UL,		"CPU entry area" },
 	[FIXADDR_START_NR]	= { 0UL,		"Fixmap area" },
 	[END_OF_SPACE_NR]	= { -1,			NULL }
@@ -579,6 +585,9 @@ static int __init pt_dump_init(void)
 # endif
 	address_markers[FIXADDR_START_NR].start_address = FIXADDR_START;
 	address_markers[CPU_ENTRY_AREA_NR].start_address = CPU_ENTRY_AREA_BASE;
+# ifdef CONFIG_MODIFY_LDT_SYSCALL
+	address_markers[LDT_NR].start_address = LDT_BASE_ADDR;
+# endif
 #endif
 	return 0;
 }
-- 
2.7.4

[PATCH 30/35] x86/ldt: Define LDT_END_ADDR

[Joerg Roedel]

From: Joerg Roedel <jroedel@suse.de>

It marks the end of the address-space range reserved for the
LDT. The LDT-code will use it when unmapping the LDT for
user-space.

Signed-off-by: Joerg Roedel <jroedel@suse.de>
---
 arch/x86/include/asm/pgtable_32_types.h | 2 ++
 arch/x86/include/asm/pgtable_64_types.h | 2 ++
 arch/x86/kernel/ldt.c                   | 2 +-
 3 files changed, 5 insertions(+), 1 deletion(-)

diff --git a/arch/x86/include/asm/pgtable_32_types.h b/arch/x86/include/asm/pgtable_32_types.h
index eb2e97a..02bd445 100644
--- a/arch/x86/include/asm/pgtable_32_types.h
+++ b/arch/x86/include/asm/pgtable_32_types.h
@@ -51,6 +51,8 @@ extern bool __vmalloc_start_set; /* set once high_memory is set */
 #define LDT_BASE_ADDR		\
 	((CPU_ENTRY_AREA_BASE - PAGE_SIZE) & PMD_MASK)
 
+#define LDT_END_ADDR		(LDT_BASE_ADDR + PMD_SIZE)
+
 #define PKMAP_BASE		\
 	((LDT_BASE_ADDR - PAGE_SIZE) & PMD_MASK)
 
diff --git a/arch/x86/include/asm/pgtable_64_types.h b/arch/x86/include/asm/pgtable_64_types.h
index e57003a..15188baa 100644
--- a/arch/x86/include/asm/pgtable_64_types.h
+++ b/arch/x86/include/asm/pgtable_64_types.h
@@ -90,12 +90,14 @@ typedef struct { pteval_t pte; } pte_t;
 # define __VMEMMAP_BASE		_AC(0xffd4000000000000, UL)
 # define LDT_PGD_ENTRY		_AC(-112, UL)
 # define LDT_BASE_ADDR		(LDT_PGD_ENTRY << PGDIR_SHIFT)
+#define  LDT_END_ADDR		(LDT_BASE_ADDR + PGDIR_SIZE)
 #else
 # define VMALLOC_SIZE_TB	_AC(32, UL)
 # define __VMALLOC_BASE		_AC(0xffffc90000000000, UL)
 # define __VMEMMAP_BASE		_AC(0xffffea0000000000, UL)
 # define LDT_PGD_ENTRY		_AC(-3, UL)
 # define LDT_BASE_ADDR		(LDT_PGD_ENTRY << PGDIR_SHIFT)
+#define  LDT_END_ADDR		(LDT_BASE_ADDR + PGDIR_SIZE)
 #endif
 
 #ifdef CONFIG_RANDOMIZE_MEMORY
diff --git a/arch/x86/kernel/ldt.c b/arch/x86/kernel/ldt.c
index 26d713e..f3c2fbf 100644
--- a/arch/x86/kernel/ldt.c
+++ b/arch/x86/kernel/ldt.c
@@ -202,7 +202,7 @@ static void free_ldt_pgtables(struct mm_struct *mm)
 #ifdef CONFIG_PAGE_TABLE_ISOLATION
 	struct mmu_gather tlb;
 	unsigned long start = LDT_BASE_ADDR;
-	unsigned long end = start + (1UL << PGDIR_SHIFT);
+	unsigned long end = LDT_END_ADDR;
 
 	if (!static_cpu_has(X86_FEATURE_PTI))
 		return;
-- 
2.7.4

[PATCH 31/35] x86/ldt: Split out sanity check in map_ldt_struct()

[Joerg Roedel]

From: Joerg Roedel <jroedel@suse.de>

This splits out the mapping sanity check and the actual
mapping of the LDT to user-space from the map_ldt_struct()
function in a way so that it is re-usable for PAE paging.

Signed-off-by: Joerg Roedel <jroedel@suse.de>
---
 arch/x86/kernel/ldt.c | 82 ++++++++++++++++++++++++++++++++++++---------------
 1 file changed, 58 insertions(+), 24 deletions(-)

diff --git a/arch/x86/kernel/ldt.c b/arch/x86/kernel/ldt.c
index f3c2fbf..8ab7df9 100644
--- a/arch/x86/kernel/ldt.c
+++ b/arch/x86/kernel/ldt.c
@@ -100,6 +100,49 @@ static struct ldt_struct *alloc_ldt_struct(unsigned int num_entries)
 	return new_ldt;
 }
 
+#ifdef CONFIG_PAGE_TABLE_ISOLATION
+
+static void do_sanity_check(struct mm_struct *mm,
+			    bool had_kernel_mapping,
+			    bool had_user_mapping)
+{
+	if (mm->context.ldt) {
+		/*
+		 * We already had an LDT.  The top-level entry should already
+		 * have been allocated and synchronized with the usermode
+		 * tables.
+		 */
+		WARN_ON(!had_kernel_mapping);
+		if (static_cpu_has(X86_FEATURE_PTI))
+			WARN_ON(!had_user_mapping);
+	} else {
+		/*
+		 * This is the first time we're mapping an LDT for this process.
+		 * Sync the pgd to the usermode tables.
+		 */
+		WARN_ON(had_kernel_mapping);
+		if (static_cpu_has(X86_FEATURE_PTI))
+			WARN_ON(had_user_mapping);
+	}
+}
+
+static void map_ldt_struct_to_user(struct mm_struct *mm)
+{
+	pgd_t *pgd = pgd_offset(mm, LDT_BASE_ADDR);
+
+	if (static_cpu_has(X86_FEATURE_PTI) && !mm->context.ldt)
+		set_pgd(kernel_to_user_pgdp(pgd), *pgd);
+}
+
+static void sanity_check_ldt_mapping(struct mm_struct *mm)
+{
+	pgd_t *pgd = pgd_offset(mm, LDT_BASE_ADDR);
+	bool had_kernel = (pgd->pgd != 0);
+	bool had_user   = (kernel_to_user_pgdp(pgd)->pgd != 0);
+
+	do_sanity_check(mm, had_kernel, had_user);
+}
+
 /*
  * If PTI is enabled, this maps the LDT into the kernelmode and
  * usermode tables for the given mm.
@@ -115,9 +158,8 @@ static struct ldt_struct *alloc_ldt_struct(unsigned int num_entries)
 static int
 map_ldt_struct(struct mm_struct *mm, struct ldt_struct *ldt, int slot)
 {
-#ifdef CONFIG_PAGE_TABLE_ISOLATION
-	bool is_vmalloc, had_top_level_entry;
 	unsigned long va;
+	bool is_vmalloc;
 	spinlock_t *ptl;
 	pgd_t *pgd;
 	int i;
@@ -131,13 +173,15 @@ map_ldt_struct(struct mm_struct *mm, struct ldt_struct *ldt, int slot)
 	 */
 	WARN_ON(ldt->slot != -1);
 
+	/* Check if the current mappings are sane */
+	sanity_check_ldt_mapping(mm);
+
 	/*
 	 * Did we already have the top level entry allocated?  We can't
 	 * use pgd_none() for this because it doens't do anything on
 	 * 4-level page table kernels.
 	 */
 	pgd = pgd_offset(mm, LDT_BASE_ADDR);
-	had_top_level_entry = (pgd->pgd != 0);
 
 	is_vmalloc = is_vmalloc_addr(ldt->entries);
 
@@ -168,35 +212,25 @@ map_ldt_struct(struct mm_struct *mm, struct ldt_struct *ldt, int slot)
 		pte_unmap_unlock(ptep, ptl);
 	}
 
-	if (mm->context.ldt) {
-		/*
-		 * We already had an LDT.  The top-level entry should already
-		 * have been allocated and synchronized with the usermode
-		 * tables.
-		 */
-		WARN_ON(!had_top_level_entry);
-		if (static_cpu_has(X86_FEATURE_PTI))
-			WARN_ON(!kernel_to_user_pgdp(pgd)->pgd);
-	} else {
-		/*
-		 * This is the first time we're mapping an LDT for this process.
-		 * Sync the pgd to the usermode tables.
-		 */
-		WARN_ON(had_top_level_entry);
-		if (static_cpu_has(X86_FEATURE_PTI)) {
-			WARN_ON(kernel_to_user_pgdp(pgd)->pgd);
-			set_pgd(kernel_to_user_pgdp(pgd), *pgd);
-		}
-	}
+	/* Propagate LDT mapping to the user page-table */
+	map_ldt_struct_to_user(mm);
 
 	va = (unsigned long)ldt_slot_va(slot);
 	flush_tlb_mm_range(mm, va, va + LDT_SLOT_STRIDE, 0);
 
 	ldt->slot = slot;
-#endif
 	return 0;
 }
 
+#else /* !CONFIG_PAGE_TABLE_ISOLATION */
+
+static int
+map_ldt_struct(struct mm_struct *mm, struct ldt_struct *ldt, int slot)
+{
+	return 0;
+}
+#endif /* CONFIG_PAGE_TABLE_ISOLATION */
+
 static void free_ldt_pgtables(struct mm_struct *mm)
 {
 #ifdef CONFIG_PAGE_TABLE_ISOLATION
-- 
2.7.4

[PATCH 32/35] x86/ldt: Enable LDT user-mapping for PAE

[Joerg Roedel]

From: Joerg Roedel <jroedel@suse.de>

This adds the needed special case for PAE to get the LDT
mapped into the user page-table when PTI is enabled. The big
difference to the other paging modes is that we don't have a
full top-level PGD entry available for the LDT, but only PMD
entry.

Signed-off-by: Joerg Roedel <jroedel@suse.de>
---
 arch/x86/include/asm/mmu_context.h |  4 ---
 arch/x86/kernel/ldt.c              | 53 ++++++++++++++++++++++++++++++++++++++
 2 files changed, 53 insertions(+), 4 deletions(-)

diff --git a/arch/x86/include/asm/mmu_context.h b/arch/x86/include/asm/mmu_context.h
index c931b88..af96cfb 100644
--- a/arch/x86/include/asm/mmu_context.h
+++ b/arch/x86/include/asm/mmu_context.h
@@ -70,11 +70,7 @@ struct ldt_struct {
 
 static inline void *ldt_slot_va(int slot)
 {
-#ifdef CONFIG_X86_64
 	return (void *)(LDT_BASE_ADDR + LDT_SLOT_STRIDE * slot);
-#else
-	BUG();
-#endif
 }
 
 /*
diff --git a/arch/x86/kernel/ldt.c b/arch/x86/kernel/ldt.c
index 8ab7df9..7787451 100644
--- a/arch/x86/kernel/ldt.c
+++ b/arch/x86/kernel/ldt.c
@@ -126,6 +126,57 @@ static void do_sanity_check(struct mm_struct *mm,
 	}
 }
 
+#ifdef CONFIG_X86_PAE
+
+static pmd_t *pgd_to_pmd_walk(pgd_t *pgd, unsigned long va)
+{
+	p4d_t *p4d;
+	pud_t *pud;
+
+	if (pgd->pgd == 0)
+		return NULL;
+
+	p4d = p4d_offset(pgd, va);
+	if (p4d_none(*p4d))
+		return NULL;
+
+	pud = pud_offset(p4d, va);
+	if (pud_none(*pud))
+		return NULL;
+
+	return pmd_offset(pud, va);
+}
+
+static void map_ldt_struct_to_user(struct mm_struct *mm)
+{
+	pgd_t *k_pgd = pgd_offset(mm, LDT_BASE_ADDR);
+	pgd_t *u_pgd = kernel_to_user_pgdp(k_pgd);
+	pmd_t *k_pmd, *u_pmd;
+
+	k_pmd = pgd_to_pmd_walk(k_pgd, LDT_BASE_ADDR);
+	u_pmd = pgd_to_pmd_walk(u_pgd, LDT_BASE_ADDR);
+
+	if (static_cpu_has(X86_FEATURE_PTI) && !mm->context.ldt)
+		set_pmd(u_pmd, *k_pmd);
+}
+
+static void sanity_check_ldt_mapping(struct mm_struct *mm)
+{
+	pgd_t *k_pgd = pgd_offset(mm, LDT_BASE_ADDR);
+	pgd_t *u_pgd = kernel_to_user_pgdp(k_pgd);
+	bool had_kernel, had_user;
+	pmd_t *k_pmd, *u_pmd;
+
+	k_pmd      = pgd_to_pmd_walk(k_pgd, LDT_BASE_ADDR);
+	u_pmd      = pgd_to_pmd_walk(u_pgd, LDT_BASE_ADDR);
+	had_kernel = (k_pmd->pmd != 0);
+	had_user   = (u_pmd->pmd != 0);
+
+	do_sanity_check(mm, had_kernel, had_user);
+}
+
+#else /* !CONFIG_X86_PAE */
+
 static void map_ldt_struct_to_user(struct mm_struct *mm)
 {
 	pgd_t *pgd = pgd_offset(mm, LDT_BASE_ADDR);
@@ -143,6 +194,8 @@ static void sanity_check_ldt_mapping(struct mm_struct *mm)
 	do_sanity_check(mm, had_kernel, had_user);
 }
 
+#endif /* CONFIG_X86_PAE */
+
 /*
  * If PTI is enabled, this maps the LDT into the kernelmode and
  * usermode tables for the given mm.
-- 
2.7.4

[PATCH 33/35] x86/pti: Allow CONFIG_PAGE_TABLE_ISOLATION for x86_32

[Joerg Roedel]

From: Joerg Roedel <jroedel@suse.de>

Allow PTI to be compiled on x86_32.

Signed-off-by: Joerg Roedel <jroedel@suse.de>
---
 security/Kconfig | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/security/Kconfig b/security/Kconfig
index b0cb9a5..93d85fd 100644
--- a/security/Kconfig
+++ b/security/Kconfig
@@ -57,7 +57,7 @@ config SECURITY_NETWORK
 config PAGE_TABLE_ISOLATION
 	bool "Remove the kernel mapping in user mode"
 	default y
-	depends on X86_64 && !UML
+	depends on X86 && !UML
 	help
 	  This feature reduces the number of hardware side channels by
 	  ensuring that the majority of kernel addresses are not mapped
-- 
2.7.4

[PATCH 34/35] x86/mm/pti: Add Warning when booting on a PCID capable CPU

[Joerg Roedel]

From: Joerg Roedel <jroedel@suse.de>

Warn the user in case the performance can be significantly
improved by switching to a 64-bit kernel.

Suggested-by: Andy Lutomirski <luto@kernel.org>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
---
 arch/x86/mm/pti.c | 16 ++++++++++++++++
 1 file changed, 16 insertions(+)

diff --git a/arch/x86/mm/pti.c b/arch/x86/mm/pti.c
index 3ffd923..8f5aa0d 100644
--- a/arch/x86/mm/pti.c
+++ b/arch/x86/mm/pti.c
@@ -385,6 +385,22 @@ void __init pti_init(void)
 
 	pr_info("enabled\n");
 
+#ifdef CONFIG_X86_32
+	if (boot_cpu_has(X86_FEATURE_PCID)) {
+		/* Use printk to work around pr_fmt() */
+		printk(KERN_WARNING "\n");
+		printk(KERN_WARNING "************************************************************\n");
+		printk(KERN_WARNING "** WARNING! WARNING! WARNING! WARNING! WARNING! WARNING!  **\n");
+		printk(KERN_WARNING "**                                                        **\n");
+		printk(KERN_WARNING "** You are using 32-bit PTI on a 64-bit PCID-capable CPU. **\n");
+		printk(KERN_WARNING "** Your performance will increase dramatically if you     **\n");
+		printk(KERN_WARNING "** switch to a 64-bit kernel!                             **\n");
+		printk(KERN_WARNING "**                                                        **\n");
+		printk(KERN_WARNING "** WARNING! WARNING! WARNING! WARNING! WARNING! WARNING!  **\n");
+		printk(KERN_WARNING "************************************************************\n");
+	}
+#endif
+
 	pti_clone_user_shared();
 	pti_clone_entry_text();
 	pti_setup_espfix64();
-- 
2.7.4

[PATCH 35/35] x86/entry/32: Add debug code to check entry/exit cr3

[Joerg Roedel]

From: Joerg Roedel <jroedel@suse.de>

Add a config option that enabled code to check that we enter
and leave the kernel with the correct cr3. This is needed
because we have no NX protection of user-addresses in the
kernel-cr3 on x86-32 and wouldn't notice that type of bug
otherwise.

Signed-off-by: Joerg Roedel <jroedel@suse.de>
---
 arch/x86/Kconfig.debug    | 12 ++++++++++++
 arch/x86/entry/entry_32.S | 43 +++++++++++++++++++++++++++++++++++++++++++
 2 files changed, 55 insertions(+)

diff --git a/arch/x86/Kconfig.debug b/arch/x86/Kconfig.debug
index 672441c..b8a772c 100644
--- a/arch/x86/Kconfig.debug
+++ b/arch/x86/Kconfig.debug
@@ -345,6 +345,18 @@ config X86_DEBUG_FPU
 
 	  If unsure, say N.
 
+config X86_DEBUG_ENTRY_CR3
+	bool	"Debug CR3 for Kernel entry/exit"
+	depends on X86_32 && PAGE_TABLE_ISOLATION
+	---help---
+	  Add instructions to the x86-32 entry code to check whether the kernel
+	  is entered and left with the correct CR3. When PTI is enabled, this
+	  checks whether we enter the kernel with the user-space cr3 when
+	  coming from user-mode and if we leave with user-cr3 back to
+	  user-space.
+
+	  If unsure, say N.
+
 config PUNIT_ATOM_DEBUG
 	tristate "ATOM Punit debug driver"
 	depends on PCI
diff --git a/arch/x86/entry/entry_32.S b/arch/x86/entry/entry_32.S
index 0250b79..ea19bcf 100644
--- a/arch/x86/entry/entry_32.S
+++ b/arch/x86/entry/entry_32.S
@@ -166,6 +166,24 @@
 .Lend_\@:
 .endm
 
+.macro BUG_IF_WRONG_CR3 no_user_check=0
+#ifdef CONFIG_X86_DEBUG_ENTRY_CR3
+	ALTERNATIVE "jmp .Lend_\@", "", X86_FEATURE_PTI
+	.if \no_user_check == 0
+	/* coming from usermode? */
+	testl	$SEGMENT_RPL_MASK, PT_CS(%esp)
+	jz	.Lend_\@
+	.endif
+	/* On user-cr3? */
+	movl	%cr3, %eax
+	testl	$PTI_SWITCH_MASK, %eax
+	jnz	.Lend_\@
+	/* From userspace with kernel cr3 - BUG */
+	ud2
+.Lend_\@:
+#endif
+.endm
+
 /*
  * Switch to kernel cr3 if not already loaded and return current cr3 in
  * \scratch_reg
@@ -218,6 +236,8 @@
 .macro SAVE_ALL_NMI cr3_reg:req
 	SAVE_ALL
 
+	BUG_IF_WRONG_CR3
+
 	/*
 	 * Now switch the CR3 when PTI is enabled.
 	 *
@@ -229,6 +249,7 @@
 
 .Lend_\@:
 .endm
+
 /*
  * This is a sneaky trick to help the unwinder find pt_regs on the stack.  The
  * frame pointer is replaced with an encoded pointer to pt_regs.  The encoding
@@ -292,6 +313,8 @@
 
 .Lswitched_\@:
 
+	BUG_IF_WRONG_CR3
+
 	RESTORE_REGS pop=\pop
 .endm
 
@@ -362,6 +385,8 @@
 
 	ALTERNATIVE     "", "jmp .Lend_\@", X86_FEATURE_XENPV
 
+	BUG_IF_WRONG_CR3
+
 	SWITCH_TO_KERNEL_CR3 scratch_reg=%eax
 
 	/*
@@ -804,6 +829,7 @@ ENTRY(entry_SYSENTER_32)
 	 */
 	pushfl
 	pushl	%eax
+	BUG_IF_WRONG_CR3 no_user_check=1
 	SWITCH_TO_KERNEL_CR3 scratch_reg=%eax
 	popl	%eax
 	popfl
@@ -898,6 +924,7 @@ ENTRY(entry_SYSENTER_32)
 	 * whereas POPF does not.)
 	 */
 	btr	$X86_EFLAGS_IF_BIT, (%esp)
+	BUG_IF_WRONG_CR3 no_user_check=1
 	popfl
 	popl	%eax
 
@@ -975,6 +1002,8 @@ restore_all:
 	/* Switch back to user CR3 */
 	SWITCH_TO_USER_CR3 scratch_reg=%eax
 
+	BUG_IF_WRONG_CR3
+
 	/* Restore user state */
 	RESTORE_REGS pop=4			# skip orig_eax/error_code
 .Lirq_return:
@@ -983,6 +1012,7 @@ restore_all:
 restore_all_kernel:
 	TRACE_IRQS_IRET
 	PARANOID_EXIT_TO_KERNEL_MODE
+	BUG_IF_WRONG_CR3
 	RESTORE_REGS 4
 	jmp	.Lirq_return
 
@@ -990,6 +1020,19 @@ restore_all_kernel:
 ENTRY(iret_exc	)
 	pushl	$0				# no error code
 	pushl	$do_iret_error
+
+#ifdef CONFIG_X86_DEBUG_ENTRY_CR3
+	/*
+	 * The stack-frame here is the one that iret faulted on, so its a
+	 * return-to-user frame. We are on kernel-cr3 because we come here from
+	 * the fixup code. This confuses the CR3 checker, so switch to user-cr3
+	 * as the checker expects it.
+	 */
+	pushl	%eax
+	SWITCH_TO_USER_CR3 scratch_reg=%eax
+	popl	%eax
+#endif
+
 	jmp	common_exception
 .previous
 	_ASM_EXTABLE(.Lirq_return, iret_exc)
-- 
2.7.4

[PATCH] x86/pgtable: Don't set huge pud/pmd on non-leaf entries

[Joerg Roedel]

Hi Ingo, Thomas,

below patch is an update to this series and I plan to include it in the
next post. David H. Gutteridge (CC'ed) was so kind to do additional
testing of these patches and found that a BUG_ON was triggered in
vmalloc_sync_one() when PTI is enabled.

My debugging showed that the bug was present before my patches but that
they uncovered this bug by setting SHARED_KERNEL_PMD to 0 when PTI is
enabled.

So please have a look at the issue description below and the patch and
let me know what you think. I know there are other and better variants
to fix that, but I felt a rework to make the generic ioremap code more
safe against this is out-of-scope at least for this patch-set.


Thanks,

	Joerg

>From 48cb37800794be8f0611e87f9ef23774c3b36ecc Mon Sep 17 00:00:00 2001
From: Joerg Roedel <joro@localhost.localdomain>
Date: Wed, 11 Apr 2018 15:55:14 +0200
Subject: [PATCH] x86/pgtable: Don't set huge pud/pmd on non-leaf entries

The pmd_set_huge() and pud_set_huge() functions are used from
generic ioremap code to establish large mappings where this
is possible.

But the generic ioremap code does not check whether the
pmd/pud entries are already populated with a non-leaf entry,
so that any page-table pages these entries point to will be
lost.

Further, on x86-32 with SHARED_KERNEL_PMD=0, this causes a
BUG_ON() in vmalloc_sync_one() when pmd entries are synced
from swapper_pg_dir to the current page-table. This happens
because the pmd entry from swapper_pg_dir was promoted to a
huge-page entry while the current pgd still contains the
non-leaf entry. Because both entries are present and point
to a different page, the BUG_ON triggers.

This was actually triggered with pti-x32 enabled in a KVM
virtual machine by the graphics driver.

A real and better fix for that would be to improve the
page-table handling in the generic ioremap code. But that is
out-of-scope for this patch-set and left for later work.

Reported-by: David H. Gutteridge <dhgutteridge@sympatico.ca>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
---
 arch/x86/mm/pgtable.c | 9 +++++++++
 1 file changed, 9 insertions(+)

diff --git a/arch/x86/mm/pgtable.c b/arch/x86/mm/pgtable.c
index d95bc7b1ffb4..6b72d2805058 100644
--- a/arch/x86/mm/pgtable.c
+++ b/arch/x86/mm/pgtable.c
@@ -1,6 +1,7 @@
 // SPDX-License-Identifier: GPL-2.0
 #include <linux/mm.h>
 #include <linux/gfp.h>
+#include <linux/hugetlb.h>
 #include <asm/pgalloc.h>
 #include <asm/pgtable.h>
 #include <asm/tlb.h>
@@ -699,6 +700,10 @@ int pud_set_huge(pud_t *pud, phys_addr_t addr, pgprot_t prot)
 	    (mtrr != MTRR_TYPE_WRBACK))
 		return 0;
 
+	/* Bail out if we are we on a populated non-leaf entry */
+	if (pud_present(*pud) && !pud_huge(*pud))
+		return 0;
+
 	prot = pgprot_4k_2_large(prot);
 
 	set_pte((pte_t *)pud, pfn_pte(
@@ -727,6 +732,10 @@ int pmd_set_huge(pmd_t *pmd, phys_addr_t addr, pgprot_t prot)
 		return 0;
 	}
 
+	/* Bail out if we are we on a populated non-leaf entry */
+	if (pmd_present(*pmd) && !pmd_huge(*pmd))
+		return 0;
+
 	prot = pgprot_4k_2_large(prot);
 
 	set_pte((pte_t *)pmd, pfn_pte(
-- 
2.13.6

[tip:x86/pti] x86/pgtable: Don't set huge PUD/PMD on non-leaf entries

[tip-bot for Joerg Roedel]

Commit-ID:  e3e288121408c3abeed5af60b87b95c847143845
Gitweb:     https://git.kernel.org/tip/e3e288121408c3abeed5af60b87b95c847143845
Author:     Joerg Roedel <joro@8bytes.org>
AuthorDate: Wed, 11 Apr 2018 17:24:38 +0200
Committer:  Ingo Molnar <mingo@kernel.org>
CommitDate: Thu, 12 Apr 2018 09:41:41 +0200

x86/pgtable: Don't set huge PUD/PMD on non-leaf entries

The pmd_set_huge() and pud_set_huge() functions are used from
the generic ioremap() code to establish large mappings where this
is possible.

But the generic ioremap() code does not check whether the
PMD/PUD entries are already populated with a non-leaf entry,
so that any page-table pages these entries point to will be
lost.

Further, on x86-32 with SHARED_KERNEL_PMD=0, this causes a
BUG_ON() in vmalloc_sync_one() when PMD entries are synced
from swapper_pg_dir to the current page-table. This happens
because the PMD entry from swapper_pg_dir was promoted to a
huge-page entry while the current PGD still contains the
non-leaf entry. Because both entries are present and point
to a different page, the BUG_ON() triggers.

This was actually triggered with pti-x32 enabled in a KVM
virtual machine by the graphics driver.

A real and better fix for that would be to improve the
page-table handling in the generic ioremap() code. But that is
out-of-scope for this patch-set and left for later work.

Reported-by: David H. Gutteridge <dhgutteridge@sympatico.ca>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: David Laight <David.Laight@aculab.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: Eduardo Valentin <eduval@amazon.com>
Cc: Greg KH <gregkh@linuxfoundation.org>
Cc: Jiri Kosina <jkosina@suse.cz>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Waiman Long <llong@redhat.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: aliguori@amazon.com
Cc: daniel.gruss@iaik.tugraz.at
Cc: hughd@google.com
Cc: keescook@google.com
Cc: linux-mm@kvack.org
Link: http://lkml.kernel.org/r/20180411152437.GC15462@8bytes.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
---
 arch/x86/mm/pgtable.c | 9 +++++++++
 1 file changed, 9 insertions(+)

diff --git a/arch/x86/mm/pgtable.c b/arch/x86/mm/pgtable.c
index d10a40aceeaa..ffc8c13c50e4 100644
--- a/arch/x86/mm/pgtable.c
+++ b/arch/x86/mm/pgtable.c
@@ -1,6 +1,7 @@
 // SPDX-License-Identifier: GPL-2.0
 #include <linux/mm.h>
 #include <linux/gfp.h>
+#include <linux/hugetlb.h>
 #include <asm/pgalloc.h>
 #include <asm/pgtable.h>
 #include <asm/tlb.h>
@@ -639,6 +640,10 @@ int pud_set_huge(pud_t *pud, phys_addr_t addr, pgprot_t prot)
 	    (mtrr != MTRR_TYPE_WRBACK))
 		return 0;
 
+	/* Bail out if we are we on a populated non-leaf entry: */
+	if (pud_present(*pud) && !pud_huge(*pud))
+		return 0;
+
 	prot = pgprot_4k_2_large(prot);
 
 	set_pte((pte_t *)pud, pfn_pte(
@@ -667,6 +672,10 @@ int pmd_set_huge(pmd_t *pmd, phys_addr_t addr, pgprot_t prot)
 		return 0;
 	}
 
+	/* Bail out if we are we on a populated non-leaf entry: */
+	if (pmd_present(*pmd) && !pmd_huge(*pmd))
+		return 0;
+
 	prot = pgprot_4k_2_large(prot);
 
 	set_pte((pte_t *)pmd, pfn_pte(

[PATCH 18/35] x86/pgtable: Move pgdp kernel/user conversion functions to pgtable.h

[Joerg Roedel]

From: Joerg Roedel <jroedel@suse.de>

Make them available on 32 bit and clone_pgd_range() happy.

Signed-off-by: Joerg Roedel <jroedel@suse.de>
---
 arch/x86/include/asm/pgtable.h    | 49 +++++++++++++++++++++++++++++++++++++++
 arch/x86/include/asm/pgtable_64.h | 49 ---------------------------------------
 2 files changed, 49 insertions(+), 49 deletions(-)

diff --git a/arch/x86/include/asm/pgtable.h b/arch/x86/include/asm/pgtable.h
index 5f49b4f..3055c77 100644
--- a/arch/x86/include/asm/pgtable.h
+++ b/arch/x86/include/asm/pgtable.h
@@ -1150,6 +1150,55 @@ static inline pmd_t pmdp_establish(struct vm_area_struct *vma,
 }
 #endif
 
+#ifdef CONFIG_PAGE_TABLE_ISOLATION
+/*
+ * All top-level PAGE_TABLE_ISOLATION page tables are order-1 pages
+ * (8k-aligned and 8k in size).  The kernel one is at the beginning 4k and
+ * the user one is in the last 4k.  To switch between them, you
+ * just need to flip the 12th bit in their addresses.
+ */
+#define PTI_PGTABLE_SWITCH_BIT	PAGE_SHIFT
+
+/*
+ * This generates better code than the inline assembly in
+ * __set_bit().
+ */
+static inline void *ptr_set_bit(void *ptr, int bit)
+{
+	unsigned long __ptr = (unsigned long)ptr;
+
+	__ptr |= BIT(bit);
+	return (void *)__ptr;
+}
+static inline void *ptr_clear_bit(void *ptr, int bit)
+{
+	unsigned long __ptr = (unsigned long)ptr;
+
+	__ptr &= ~BIT(bit);
+	return (void *)__ptr;
+}
+
+static inline pgd_t *kernel_to_user_pgdp(pgd_t *pgdp)
+{
+	return ptr_set_bit(pgdp, PTI_PGTABLE_SWITCH_BIT);
+}
+
+static inline pgd_t *user_to_kernel_pgdp(pgd_t *pgdp)
+{
+	return ptr_clear_bit(pgdp, PTI_PGTABLE_SWITCH_BIT);
+}
+
+static inline p4d_t *kernel_to_user_p4dp(p4d_t *p4dp)
+{
+	return ptr_set_bit(p4dp, PTI_PGTABLE_SWITCH_BIT);
+}
+
+static inline p4d_t *user_to_kernel_p4dp(p4d_t *p4dp)
+{
+	return ptr_clear_bit(p4dp, PTI_PGTABLE_SWITCH_BIT);
+}
+#endif /* CONFIG_PAGE_TABLE_ISOLATION */
+
 /*
  * clone_pgd_range(pgd_t *dst, pgd_t *src, int count);
  *
diff --git a/arch/x86/include/asm/pgtable_64.h b/arch/x86/include/asm/pgtable_64.h
index c863816..9934115 100644
--- a/arch/x86/include/asm/pgtable_64.h
+++ b/arch/x86/include/asm/pgtable_64.h
@@ -132,55 +132,6 @@ static inline pud_t native_pudp_get_and_clear(pud_t *xp)
 #endif
 }
 
-#ifdef CONFIG_PAGE_TABLE_ISOLATION
-/*
- * All top-level PAGE_TABLE_ISOLATION page tables are order-1 pages
- * (8k-aligned and 8k in size).  The kernel one is at the beginning 4k and
- * the user one is in the last 4k.  To switch between them, you
- * just need to flip the 12th bit in their addresses.
- */
-#define PTI_PGTABLE_SWITCH_BIT	PAGE_SHIFT
-
-/*
- * This generates better code than the inline assembly in
- * __set_bit().
- */
-static inline void *ptr_set_bit(void *ptr, int bit)
-{
-	unsigned long __ptr = (unsigned long)ptr;
-
-	__ptr |= BIT(bit);
-	return (void *)__ptr;
-}
-static inline void *ptr_clear_bit(void *ptr, int bit)
-{
-	unsigned long __ptr = (unsigned long)ptr;
-
-	__ptr &= ~BIT(bit);
-	return (void *)__ptr;
-}
-
-static inline pgd_t *kernel_to_user_pgdp(pgd_t *pgdp)
-{
-	return ptr_set_bit(pgdp, PTI_PGTABLE_SWITCH_BIT);
-}
-
-static inline pgd_t *user_to_kernel_pgdp(pgd_t *pgdp)
-{
-	return ptr_clear_bit(pgdp, PTI_PGTABLE_SWITCH_BIT);
-}
-
-static inline p4d_t *kernel_to_user_p4dp(p4d_t *p4dp)
-{
-	return ptr_set_bit(p4dp, PTI_PGTABLE_SWITCH_BIT);
-}
-
-static inline p4d_t *user_to_kernel_p4dp(p4d_t *p4dp)
-{
-	return ptr_clear_bit(p4dp, PTI_PGTABLE_SWITCH_BIT);
-}
-#endif /* CONFIG_PAGE_TABLE_ISOLATION */
-
 /*
  * Page table pages are page-aligned.  The lower half of the top
  * level is used for userspace and the top half for the kernel.
-- 
2.7.4