[PATCH v2 1/6] dt-bindings: add laird and giantec vendor prefix

[PATCH v2 1/6] dt-bindings: add laird and giantec vendor prefix

[Ben Whitten]

This adds a vendor prefix "laird" for Laird PLC who make
CPU modules and system on chips.
Also adds "giantec" for Giantec Semiconductor, Inc. who
make eeprom memory used on Laird designs.

Signed-off-by: Ben Whitten <ben.whitten@lairdtech.com>
---
 Documentation/devicetree/bindings/vendor-prefixes.txt | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt b/Documentation/devicetree/bindings/vendor-prefixes.txt
index a38d8bf..adf808c 100644
--- a/Documentation/devicetree/bindings/vendor-prefixes.txt
+++ b/Documentation/devicetree/bindings/vendor-prefixes.txt
@@ -132,6 +132,7 @@ geekbuying	GeekBuying
 gef	GE Fanuc Intelligent Platforms Embedded Systems, Inc.
 GEFanuc	GE Fanuc Intelligent Platforms Embedded Systems, Inc.
 geniatech	Geniatech, Inc.
+giantec	Giantec Semiconductor, Inc.
 giantplus	Giantplus Technology Co., Ltd.
 globalscale	Globalscale Technologies, Inc.
 gmt	Global Mixed-mode Technology, Inc.
@@ -188,6 +189,7 @@ kingnovel	Kingnovel Technology Co., Ltd.
 kosagi	Sutajio Ko-Usagi PTE Ltd.
 kyo	Kyocera Corporation
 lacie	LaCie
+laird	Laird PLC
 lantiq	Lantiq Semiconductor
 lattice	Lattice Semiconductor
 lego	LEGO Systems A/S
-- 
2.7.4

[PATCH v2 2/6] arm: dts: at91: add labels to soc dtsi for derivative boards

[Ben Whitten]

This adds labels to commonly used device-tree nodes so that derivative
boards can avoid ahb/apb hierarchy.

Signed-off-by: Ben Whitten <ben.whitten@lairdtech.com>
---
 arch/arm/boot/dts/at91sam9x5.dtsi | 8 ++++----
 arch/arm/boot/dts/sama5d3.dtsi    | 8 ++++----
 2 files changed, 8 insertions(+), 8 deletions(-)

diff --git a/arch/arm/boot/dts/at91sam9x5.dtsi b/arch/arm/boot/dts/at91sam9x5.dtsi
index a3c3c31..11c0ef1 100644
--- a/arch/arm/boot/dts/at91sam9x5.dtsi
+++ b/arch/arm/boot/dts/at91sam9x5.dtsi
@@ -389,13 +389,13 @@
 				};
 			};
 
-			rstc@fffffe00 {
+			reset_controller: rstc@fffffe00 {
 				compatible = "atmel,at91sam9g45-rstc";
 				reg = <0xfffffe00 0x10>;
 				clocks = <&clk32k>;
 			};
 
-			shdwc@fffffe10 {
+			shutdown_controller: shdwc@fffffe10 {
 				compatible = "atmel,at91sam9x5-shdwc";
 				reg = <0xfffffe10 0x10>;
 				clocks = <&clk32k>;
@@ -470,7 +470,7 @@
 				clock-names = "dma_clk";
 			};
 
-			pinctrl@fffff400 {
+			pinctrl: pinctrl@fffff400 {
 				#address-cells = <1>;
 				#size-cells = <1>;
 				compatible = "atmel,at91sam9x5-pinctrl", "atmel,at91rm9200-pinctrl", "simple-bus";
@@ -1206,7 +1206,7 @@
 				};
 			};
 
-			watchdog@fffffe40 {
+			watchdog: watchdog@fffffe40 {
 				compatible = "atmel,at91sam9260-wdt";
 				reg = <0xfffffe40 0x10>;
 				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
diff --git a/arch/arm/boot/dts/sama5d3.dtsi b/arch/arm/boot/dts/sama5d3.dtsi
index eae5e1e..1408fa4 100644
--- a/arch/arm/boot/dts/sama5d3.dtsi
+++ b/arch/arm/boot/dts/sama5d3.dtsi
@@ -494,7 +494,7 @@
 				atmel,external-irqs = <47>;
 			};
 
-			pinctrl@fffff200 {
+			pinctrl: pinctrl@fffff200 {
 				#address-cells = <1>;
 				#size-cells = <1>;
 				compatible = "atmel,sama5d3-pinctrl", "atmel,at91sam9x5-pinctrl", "simple-bus";
@@ -1340,13 +1340,13 @@
 				};
 			};
 
-			rstc@fffffe00 {
+			reset_controller: rstc@fffffe00 {
 				compatible = "atmel,sama5d3-rstc", "atmel,at91sam9g45-rstc";
 				reg = <0xfffffe00 0x10>;
 				clocks = <&clk32k>;
 			};
 
-			shutdown-controller@fffffe10 {
+			shutdown_controller: shutdown-controller@fffffe10 {
 				compatible = "atmel,at91sam9x5-shdwc";
 				reg = <0xfffffe10 0x10>;
 				clocks = <&clk32k>;
@@ -1359,7 +1359,7 @@
 				clocks = <&mck>;
 			};
 
-			watchdog@fffffe40 {
+			watchdog: watchdog@fffffe40 {
 				compatible = "atmel,at91sam9260-wdt";
 				reg = <0xfffffe40 0x10>;
 				interrupts = <4 IRQ_TYPE_LEVEL_HIGH 7>;
-- 
2.7.4

[PATCH v2 3/6] arm: dts: add support for Laird WB45N cpu module and DVK

[Ben Whitten]

This adds support for Lairds combo CPU module, featuring on board
Atheros wifi, CSR Bluetooth radio and, Atmel CPU.
https://www.lairdtech.com/products/wb45nbt

Signed-off-by: Ben Whitten <ben.whitten@lairdtech.com>
---
 arch/arm/boot/dts/Makefile        |   1 +
 arch/arm/boot/dts/at91-wb45n.dts  |  64 +++++++++++++++
 arch/arm/boot/dts/at91-wb45n.dtsi | 165 ++++++++++++++++++++++++++++++++++++++
 3 files changed, 230 insertions(+)
 create mode 100644 arch/arm/boot/dts/at91-wb45n.dts
 create mode 100644 arch/arm/boot/dts/at91-wb45n.dtsi

diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 7e24249..04604d2 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -38,6 +38,7 @@ dtb-$(CONFIG_SOC_AT91SAM9) += \
 	at91-ariettag25.dtb \
 	at91-cosino_mega2560.dtb \
 	at91-kizboxmini.dtb \
+	at91-wb45n.dtb \
 	at91sam9g15ek.dtb \
 	at91sam9g25ek.dtb \
 	at91sam9g35ek.dtb \
diff --git a/arch/arm/boot/dts/at91-wb45n.dts b/arch/arm/boot/dts/at91-wb45n.dts
new file mode 100644
index 0000000..64ce150
--- /dev/null
+++ b/arch/arm/boot/dts/at91-wb45n.dts
@@ -0,0 +1,64 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * at91-wb45n.dts - Device Tree file for WB45NBT board
+ *
+ *  Copyright (C) 2018 Laird
+ *
+*/
+/dts-v1/;
+#include "at91-wb45n.dtsi"
+
+/ {
+	model = "Laird Workgroup Bridge 45N - Atmel AT91SAM (dt)";
+	compatible = "laird,wb45n", "laird,wbxx", "atmel,at91sam9x5", "atmel,at91sam9";
+
+	gpio_keys {
+		compatible = "gpio-keys";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		irqbtn@18 {
+			reg = <18>;
+			label = "IRQBTN";
+			linux,code = <99>;
+			gpios = <&pioB 18 GPIO_ACTIVE_LOW>;
+			gpio-key,wakeup = <1>;
+		};
+	};
+};
+
+&watchdog {
+	status = "okay";
+};
+
+&usb0 {
+	status = "okay";
+};
+
+&mmc0 {
+	status = "okay";
+};
+
+&spi0 {
+	status = "okay";
+};
+
+&macb0 {
+	status = "okay";
+};
+
+&dbgu {
+	status = "okay";
+};
+
+&usart0 {
+	status = "okay";
+};
+
+&usart3 {
+	status = "okay";
+};
+
+&i2c1 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/at91-wb45n.dtsi b/arch/arm/boot/dts/at91-wb45n.dtsi
new file mode 100644
index 0000000..ebe61a2
--- /dev/null
+++ b/arch/arm/boot/dts/at91-wb45n.dtsi
@@ -0,0 +1,165 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * at91-wb45n.dtsi - Device Tree file for WB45NBT board
+ *
+ *  Copyright (C) 2018 Laird
+ *
+ */
+
+#include "at91sam9g25.dtsi"
+
+/ {
+	model = "Laird Workgroup Bridge 45N - Atmel AT91SAM (dt)";
+	compatible = "laird,wb45n", "laird,wbxx", "atmel,at91sam9x5", "atmel,at91sam9";
+
+	chosen {
+		bootargs = "ubi.mtd=6 root=ubi0:rootfs rootfstype=ubifs rw";
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory {
+		reg = <0x20000000 0x4000000>;
+	};
+
+	atheros {
+		compatible = "atheros,ath6kl";
+		atheros,board-id = "SD32";
+	};
+};
+
+&reset_controller {
+	compatible = "atmel,sama5d3-rstc";
+};
+
+&shutdown_controller {
+	atmel,wakeup-mode = "low";
+};
+
+&slow_xtal {
+	clock-frequency = <32768>;
+};
+
+&main_xtal {
+	clock-frequency = <12000000>;
+};
+
+&ebi {
+	status = "okay";
+	nand_controller: nand-controller {
+		pinctrl-0 = <&pinctrl_nand_cs &pinctrl_nand_rb &pinctrl_nand_oe_we>;
+		pinctrl-names = "default";
+		status = "okay";
+
+		nand@3 {
+			reg = <0x3 0x0 0x800000>;
+			rb-gpios = <&pioD 5 GPIO_ACTIVE_HIGH>;
+			cs-gpios = <&pioD 4 GPIO_ACTIVE_HIGH>;
+			nand-bus-width = <8>;
+			nand-ecc-mode = "hw";
+			nand-ecc-strength = <4>;
+			nand-ecc-step-size = <512>;
+			nand-on-flash-bbt;
+			label = "atmel_nand";
+
+			partitions {
+				compatible = "fixed-partitions";
+				#address-cells = <1>;
+				#size-cells = <1>;
+
+				at91bootstrap@0 {
+					label = "at91bs";
+					reg = <0x0 0x20000>;
+				};
+
+				uboot@20000 {
+					label = "u-boot";
+					reg = <0x20000 0x80000>;
+				};
+
+				ubootenv@a0000 {
+					label = "u-boot-env";
+					reg = <0xa0000 0x20000>;
+				};
+
+				ubootenv@c0000 {
+					label = "redund-env";
+					reg = <0xc0000 0x20000>;
+				};
+
+				kernel-a@e0000 {
+					label = "kernel-a";
+					reg = <0xe0000 0x280000>;
+				};
+
+				kernel-b@360000 {
+					label = "kernel-b";
+					reg = <0x360000 0x280000>;
+				};
+
+				rootfs-a@5e0000 {
+					label = "rootfs-a";
+					reg = <0x5e0000 0x2600000>;
+				};
+
+				rootfs-b@2be0000 {
+					label = "rootfs-b";
+					reg = <0x2be0000 0x2600000>;
+				};
+
+				user@51e0000 {
+					label = "user";
+					reg = <0x51e0000 0x2dc0000>;
+				};
+
+				logs@7fa0000 {
+					label = "logs";
+					reg = <0x7fa0000 0x60000>;
+				};
+
+			};
+		};
+	};
+};
+
+&usb0 {
+	num-ports = <2>;
+	atmel,vbus-gpio = <
+		&pioB 12 GPIO_ACTIVE_HIGH
+		&pioA 31 GPIO_ACTIVE_HIGH
+		>;
+	atmel,oc-gpio = <&pioB 13 GPIO_ACTIVE_LOW>;
+};
+
+&macb0 {
+	phy-mode = "rmii";
+};
+
+&spi0 {
+	cs-gpios = <&pioA 14 0>, <&pioA 7 0>, <0>, <0>;
+};
+
+&usb2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_board_usb2>;
+	atmel,vbus-gpio = <&pioB 11 GPIO_ACTIVE_HIGH>;
+};
+
+&mmc0 {
+	pinctrl-0 = <
+		&pinctrl_mmc0_slot0_clk_cmd_dat0
+		&pinctrl_mmc0_slot0_dat1_3>;
+	slot@0 {
+		reg = <0>;
+		bus-width = <4>;
+	};
+};
+
+&pinctrl {
+	usb2 {
+		pinctrl_board_usb2: usb2-board {
+			atmel,pins =
+				<AT91_PIOB 11 AT91_PERIPH_GPIO AT91_PINCTRL_DEGLITCH>;		/* PB11 gpio vbus sense, deglitch */
+		};
+	};
+};
+
-- 
2.7.4

[PATCH v2 4/6] arm: dts: add support for Laird WB50N cpu module and DVK

[Ben Whitten]

This adds support for Lairds CPU module, featuring Atheros wifi, CSR
Bluetooth and, Atmel SAMA5D3 CPU.
https://www.lairdtech.com/products/wb50nbt-wi-fi-bluetooth-module

Signed-off-by: Ben Whitten <ben.whitten@lairdtech.com>
---
 arch/arm/boot/dts/Makefile        |   1 +
 arch/arm/boot/dts/at91-wb50n.dts  | 112 +++++++++++++++++++++
 arch/arm/boot/dts/at91-wb50n.dtsi | 198 ++++++++++++++++++++++++++++++++++++++
 3 files changed, 311 insertions(+)
 create mode 100644 arch/arm/boot/dts/at91-wb50n.dts
 create mode 100644 arch/arm/boot/dts/at91-wb50n.dtsi

diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 04604d2..07823be 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -52,6 +52,7 @@ dtb-$(CONFIG_SOC_SAM_V7) += \
 	at91-sama5d2_xplained.dtb \
 	at91-sama5d3_xplained.dtb \
 	at91-tse850-3.dtb \
+	at91-wb50n.dtb \
 	sama5d31ek.dtb \
 	sama5d33ek.dtb \
 	sama5d34ek.dtb \
diff --git a/arch/arm/boot/dts/at91-wb50n.dts b/arch/arm/boot/dts/at91-wb50n.dts
new file mode 100644
index 0000000..8cecc70
--- /dev/null
+++ b/arch/arm/boot/dts/at91-wb50n.dts
@@ -0,0 +1,112 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * at91-wb50n.dts - Device Tree file for wb50n evaluation board
+ *
+ *  Copyright (C) 2018 Laird
+ *
+ */
+
+/dts-v1/;
+#include "at91-wb50n.dtsi"
+
+/ {
+	model = "Laird Workgroup Bridge 50N - Atmel SAMA5D";
+	compatible = "laird,wb50n", "atmel,sama5d31", "atmel,sama5d3", "atmel,sama5";
+
+	gpio_keys {
+		compatible = "gpio-keys";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		btn0@10 {
+			reg = <10>;
+			label = "BTNESC";
+			linux,code = <1>; /* ESC button */
+			gpios = <&pioA 10 GPIO_ACTIVE_LOW>;
+			gpio-key,wakeup = <1>;
+		};
+
+		irqbtn@31 {
+			reg = <31>;
+			label = "IRQBTN";
+			linux,code = <99>; /* SysReq button */
+			gpios = <&pioE 31 GPIO_ACTIVE_LOW>;
+			gpio-key,wakeup = <1>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led0 {
+			label = "wb50n:blue:led0";
+			gpios = <&pioA 12 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		led1 {
+			label = "wb50n:green:led1";
+			gpios = <&pioA 24 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		led2 {
+			label = "wb50n:red:led2";
+			gpios = <&pioA 26 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+	};
+};
+
+&watchdog {
+	status = "okay";
+};
+
+&mmc0 {
+	status = "okay";
+};
+
+&macb1 {
+	status = "okay";
+};
+
+&dbgu {
+	status = "okay";
+};
+
+/* On BB40 this port is labeled UART1 */
+&usart0 {
+	status = "okay";
+};
+
+/* On BB40 this port is labeled UART0 */
+&usart1 {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+};
+
+&spi1 {
+	status = "okay";
+
+	spidev@0 {
+		compatible = "spidev";
+		reg = <0>;
+		spi-max-frequency = <8000000>;
+	};
+};
+
+&usb0 {
+	status = "okay";
+};
+
+&usb1 {
+	status = "okay";
+};
+
+&usb2 {
+	status = "okay";
+};
+
diff --git a/arch/arm/boot/dts/at91-wb50n.dtsi b/arch/arm/boot/dts/at91-wb50n.dtsi
new file mode 100644
index 0000000..85692c8
--- /dev/null
+++ b/arch/arm/boot/dts/at91-wb50n.dtsi
@@ -0,0 +1,198 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * at91-wb50n.dtsi - Device Tree include file for wb50n cpu module
+ *
+ *  Copyright (C) 2018 Laird
+ *
+ */
+
+#include "sama5d31.dtsi"
+
+/ {
+	model = "Laird Workgroup Bridge 50N - Atmel SAMA5D";
+	compatible = "laird,wb50n", "atmel,sama5d31", "atmel,sama5d3", "atmel,sama5";
+
+	chosen {
+		bootargs = "ubi.mtd=6 root=ubi0:rootfs rootfstype=ubifs rw";
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory {
+		reg = <0x20000000 0x4000000>;
+	};
+};
+
+&pinctrl {
+	board {
+		pinctrl_mmc0_cd: mmc0_cd {
+			atmel,pins = <AT91_PIOC 26 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>; /* PC26 GPIO with pullup deglitch */
+		};
+
+		pinctrl_usba_vbus: usba_vbus {
+			atmel,pins = <AT91_PIOB 13 AT91_PERIPH_GPIO AT91_PINCTRL_DEGLITCH>; /* PB13 GPIO with deglitch */
+		};
+	};
+};
+
+&slow_xtal {
+	clock-frequency = <32768>;
+};
+
+&main_xtal {
+	clock-frequency = <12000000>;
+};
+
+&slow_osc {
+	atmel,osc-bypass;
+};
+
+&usart1_clk {
+	atmel,clk-output-range = <0 132000000>;
+};
+
+&mmc0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_mmc0_clk_cmd_dat0 &pinctrl_mmc0_dat1_3 &pinctrl_mmc0_cd>;
+	cd-gpios = <&pioC 26 GPIO_ACTIVE_LOW>;
+	slot@0 {
+		reg = <0>;
+		bus-width = <4>;
+	};
+};
+
+&mmc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_mmc1_clk_cmd_dat0 &pinctrl_mmc1_dat1_3>;
+	status = "okay";
+	atheros@0 {
+		compatible = "atheros,ath6kl";
+		atheros,board-id = "SD32";
+		reg = <0>;
+		bus-width = <4>;
+	};
+};
+
+&macb1 {
+	phy-mode = "rmii";
+};
+
+&dbgu {
+	dmas = <0>, <0>;	/*  Do not use DMA for dbgu */
+};
+
+/* On BB40 this port is labeled UART1 */
+&usart0 {
+	atmel,use-dma-rx;
+	atmel,use-dma-tx;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usart0 &pinctrl_usart0_rts_cts>;
+};
+
+/* On BB40 this port is labeled UART0 */
+&usart1 {
+	atmel,use-dma-rx;
+	atmel,use-dma-tx;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usart1 &pinctrl_usart1_rts_cts>;
+	dtr-gpios = <&pioD 13 GPIO_ACTIVE_LOW>;
+	dsr-gpios = <&pioD 11 GPIO_ACTIVE_LOW>;
+	dcd-gpios = <&pioD 7 GPIO_ACTIVE_LOW>;
+	rng-gpios = <&pioD 8 GPIO_ACTIVE_LOW>;
+};
+
+/* USART3 is direct-connect to the Bluetooth UART on the radio SIP */
+&usart3 {
+	atmel,use-dma-rx;
+	atmel,use-dma-tx;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usart3 &pinctrl_usart3_rts_cts>;
+	status = "okay";
+};
+
+&spi1 {
+	cs-gpios = <&pioC 25 0>, <0>, <0>, <0>;
+};
+
+&ebi {
+	pinctrl-0 = <&pinctrl_ebi_nand_addr>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&nand_controller {
+	status = "okay";
+
+	nand: nand@3 {
+		reg = <0x3 0x0 0x2>;
+		atmel,rb = <0>;
+		nand-bus-width = <8>;
+		nand-ecc-mode = "hw";
+		nand-ecc-strength = <8>;
+		nand-ecc-step-size = <512>;
+		nand-on-flash-bbt;
+		label = "atmel_nand";
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			at91bootstrap@0 {
+				label = "at91bs";
+				reg = <0x0 0x20000>;
+			};
+
+			uboot@20000 {
+				label = "u-boot";
+				reg = <0x20000 0x80000>;
+			};
+
+			ubootenv@a0000 {
+				label = "u-boot-env";
+				reg = <0xa0000 0x20000>;
+			};
+
+			ubootenv@c0000 {
+				label = "u-boot-env";
+				reg = <0xc0000 0x20000>;
+			};
+
+			kernel-a@e0000 {
+				label = "kernel-a";
+				reg = <0xe0000 0x500000>;
+			};
+
+			kernel-b@5e0000 {
+				label = "kernel-b";
+				reg = <0x5e0000 0x500000>;
+			};
+
+			rootfs-a@ae0000 {
+				label = "rootfs-a";
+				reg = <0xae0000 0x3000000>;
+			};
+
+			rootfs-b@3ae0000 {
+				label = "rootfs-b";
+				reg = <0x3ae0000 0x3000000>;
+			};
+
+			user@6ae0000 {
+				label = "user";
+				reg = <0x6ae0000 0x14e0000>;
+			};
+		};
+	};
+};
+
+&usb0 {
+	atmel,vbus-gpio = <&pioB 13 GPIO_ACTIVE_LOW>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usba_vbus>;
+};
+
+&usb1 {
+	num-ports = <3>;
+	atmel,vbus-gpio = <&pioA 2 GPIO_ACTIVE_LOW>;
+	atmel,oc-gpio = <&pioA 4 GPIO_ACTIVE_LOW>;
+};
-- 
2.7.4

[PATCH v2 5/6] arm: dts: add support for Gatwick board based on WB50N

[Ben Whitten]

Add support for the LoRa gateway from Laird, the RG1xx.
This board houses the WB50NBT CPU module along with a Semtech SX1301 based
concentrator card.
https://www.lairdtech.com/products/rg1xx-lora-gateway

Signed-off-by: Ben Whitten <ben.whitten@lairdtech.com>

# Conflicts:
#	arch/arm/boot/dts/Makefile
---
 arch/arm/boot/dts/Makefile         |   1 +
 arch/arm/boot/dts/at91-gatwick.dts | 121 +++++++++++++++++++++++++++++++++++++
 2 files changed, 122 insertions(+)
 create mode 100644 arch/arm/boot/dts/at91-gatwick.dts

diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 07823be..214d5d9 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -51,6 +51,7 @@ dtb-$(CONFIG_SOC_SAM_V7) += \
 	at91-sama5d2_ptc_ek.dtb \
 	at91-sama5d2_xplained.dtb \
 	at91-sama5d3_xplained.dtb \
+	at91-gatwick.dtb \
 	at91-tse850-3.dtb \
 	at91-wb50n.dtb \
 	sama5d31ek.dtb \
diff --git a/arch/arm/boot/dts/at91-gatwick.dts b/arch/arm/boot/dts/at91-gatwick.dts
new file mode 100644
index 0000000..5a81cab
--- /dev/null
+++ b/arch/arm/boot/dts/at91-gatwick.dts
@@ -0,0 +1,121 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * at91-gatwick.dts - Device Tree file for the Gatwick board
+ *
+ *  Copyright (C) 2018 Laird
+ *
+ */
+/dts-v1/;
+#include "at91-wb50n.dtsi"
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "Laird Workgroup Bridge 50N - Project Gatwick";
+	compatible = "laird,gatwick", "laird,wb50n", "atmel,sama5d31", "atmel,sama5d3", "atmel,sama5";
+
+	gpio_keys {
+		compatible = "gpio-keys";
+		autorepeat;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_key_gpio>;
+
+		reset-button {
+			label = "Reset Button";
+			linux,code = <KEY_SETUP>;
+			gpios = <&pioE 31 GPIO_ACTIVE_LOW>;
+			wakeup-source;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		ethernet {
+			label = "gatwick:yellow:ethernet";
+			gpios = <&pioA 10 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		wifi {
+			label = "gatwick:green:wifi";
+			gpios = <&pioA 28 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		ble {
+			label = "gatwick:blue:ble";
+			gpios = <&pioA 22 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		lora {
+			label = "gatwick:orange:lora";
+			gpios = <&pioA 26 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		blank {
+			label = "gatwick:green:blank";
+			gpios = <&pioA 24 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		user {
+			label = "gatwick:yellow:user";
+			gpios = <&pioA 12 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+	};
+};
+
+&pinctrl {
+	board {
+		pinctrl_key_gpio: key_gpio_0 {
+		  atmel,pins =
+			  <AT91_PIOE 31 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>; /* PE31 GPIO with pullup deglitch */
+	  };
+	};
+};
+
+&mmc0 {
+	status = "okay";
+};
+
+&macb1 {
+	status = "okay";
+};
+
+&dbgu {
+	status = "okay";
+};
+
+/* FTDI USART */
+&usart0 {
+	status = "okay";
+};
+
+/* GPS USART */
+&usart1 {
+	pinctrl-0 = <&pinctrl_usart1>;
+	status = "okay";
+};
+
+&spi1 {
+	status = "okay";
+
+	spidev@0 {
+		compatible = "semtech,sx1301";
+		reg = <0>;
+		spi-max-frequency = <8000000>;
+	};
+};
+
+&usb1 {
+	status = "okay";
+	/delete-property/atmel,oc-gpio;
+};
+
+&usb2 {
+	status = "okay";
+};
-- 
2.7.4

[PATCH v2 6/6] arm: dts: add support for Laird SOM60 module and DVK boards

[Ben Whitten]

This adds support for Lairds upcoming SOM module, featuring Marvell WiFi
and Bluetooth, 2Gb NAND / 1Gb LPDDR SDRAM, and an Atmel SAMA5D3 CPU.

Signed-off-by: Ben Whitten <ben.whitten@lairdtech.com>
---
 arch/arm/boot/dts/Makefile                    |   1 +
 arch/arm/boot/dts/at91-dvk_som60.dts          |  95 +++++++++++
 arch/arm/boot/dts/at91-dvk_su60_somc.dtsi     | 159 ++++++++++++++++++
 arch/arm/boot/dts/at91-dvk_su60_somc_lcm.dtsi |  90 ++++++++++
 arch/arm/boot/dts/at91-som60.dtsi             | 231 ++++++++++++++++++++++++++
 5 files changed, 576 insertions(+)
 create mode 100644 arch/arm/boot/dts/at91-dvk_som60.dts
 create mode 100644 arch/arm/boot/dts/at91-dvk_su60_somc.dtsi
 create mode 100644 arch/arm/boot/dts/at91-dvk_su60_somc_lcm.dtsi
 create mode 100644 arch/arm/boot/dts/at91-som60.dtsi

diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 214d5d9..b0e164a 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -51,6 +51,7 @@ dtb-$(CONFIG_SOC_SAM_V7) += \
 	at91-sama5d2_ptc_ek.dtb \
 	at91-sama5d2_xplained.dtb \
 	at91-sama5d3_xplained.dtb \
+	at91-dvk_som60.dtb \
 	at91-gatwick.dtb \
 	at91-tse850-3.dtb \
 	at91-wb50n.dtb \
diff --git a/arch/arm/boot/dts/at91-dvk_som60.dts b/arch/arm/boot/dts/at91-dvk_som60.dts
new file mode 100644
index 0000000..ededd5b
--- /dev/null
+++ b/arch/arm/boot/dts/at91-dvk_som60.dts
@@ -0,0 +1,95 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * at91-dvk_som60.dts - Device Tree file for the DVK SOM60 board
+ *
+ *  Copyright (C) 2018 Laird,
+ *		  2018 Ben Whitten <ben.whitten@lairdtech.com>
+ *
+ */
+/dts-v1/;
+#include "at91-som60.dtsi"
+#include "at91-dvk_su60_somc.dtsi"
+#include "at91-dvk_su60_somc_lcm.dtsi"
+
+/ {
+	model = "Laird DVK SOM60";
+	compatible = "laird,dvk-som60", "laird,som60", "atmel,sama5d36", "atmel,sama5d3", "atmel,sama5";
+
+	chosen {
+		stdout-path = &dbgu;
+		tick-timer = &pit;
+	};
+};
+
+&mmc0 {
+	status = "okay";
+};
+
+&spi0 {
+	status = "okay";
+};
+
+&ssc0 {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+};
+
+&i2c1 {
+	status = "okay";
+};
+
+&usart1 {
+	status = "okay";
+};
+
+&usart2 {
+	status = "okay";
+};
+
+&usart3 {
+	status = "okay";
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&dbgu {
+	status = "okay";
+};
+
+&pit {
+	status = "okay";
+};
+
+&adc0 {
+	status = "okay";
+};
+
+&can1 {
+	status = "okay";
+};
+
+&macb0 {
+	status = "okay";
+};
+
+&macb1 {
+	status = "okay";
+};
+
+&usb0 {
+	status = "okay";
+};
+
+&usb1 {
+	status = "okay";
+};
+
+&usb2 {
+	status = "okay";
+};
+
diff --git a/arch/arm/boot/dts/at91-dvk_su60_somc.dtsi b/arch/arm/boot/dts/at91-dvk_su60_somc.dtsi
new file mode 100644
index 0000000..bb86f17
--- /dev/null
+++ b/arch/arm/boot/dts/at91-dvk_su60_somc.dtsi
@@ -0,0 +1,159 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * at91-dvk_su60_somc.dtsi - Device Tree file for the DVK SOM60 base board
+ *
+ *  Copyright (C) 2018 Laird,
+ *		  2018 Ben Whitten <ben.whitten@lairdtech.com>
+ *
+ */
+
+/ {
+	sound {
+		compatible = "atmel,asoc-wm8904";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pck2_as_audio_mck>;
+
+		atmel,model = "wm8904 @ DVK-SOM60";
+		atmel,audio-routing =
+			"Headphone Jack", "HPOUTL",
+			"Headphone Jack", "HPOUTR",
+			"IN2L", "Line In Jack",
+			"IN2R", "Line In Jack",
+			"Mic", "MICBIAS",
+			"IN1L", "Mic";
+
+		atmel,ssc-controller = <&ssc0>;
+		atmel,audio-codec = <&wm8904>;
+
+		status = "okay";
+	};
+};
+
+&mmc0 {
+	status = "okay";
+
+	pinctrl-0 = <&pinctrl_mmc0_clk_cmd_dat0 &pinctrl_mmc0_dat1_3 &pinctrl_mmc0_cd>;
+	slot@0 {
+		bus-width = <4>;
+		cd-gpios = <&pioE 31 GPIO_ACTIVE_HIGH>;
+		cd-inverted;
+	};
+};
+
+&spi0 {
+	status = "okay";
+
+	/* spi0.0: 4M Flash Macronix MX25R4035FM1IL0 */
+	spi-flash@0 {
+		compatible = "mxicy,mx25u4035", "jedec,spi-nor";
+		spi-max-frequency = <33000000>;
+		reg = <0>;
+	};
+};
+
+&ssc0 {
+	atmel,clk-from-rk-pin;
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	wm8904: wm8904@1a {
+		compatible = "wlf,wm8904";
+		reg = <0x1a>;
+		clocks = <&pck2>;
+		clock-names = "mclk";
+	};
+};
+
+&i2c1 {
+	status = "okay";
+
+	eeprom@87 {
+		compatible = "giantec,gt24c32a", "atmel,24c32";
+		reg = <87>;
+		pagesize = <32>;
+	};
+};
+
+&usart1 {
+	status = "okay";
+};
+
+&usart2 {
+	status = "okay";
+};
+
+&usart3 {
+	status = "okay";
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&dbgu {
+	status = "okay";
+};
+
+&pit {
+	status = "okay";
+};
+
+&adc0 {
+	status = "okay";
+};
+
+&can1 {
+	status = "okay";
+};
+
+&macb0 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+
+	ethernet-phy@7 {
+		reg = <7>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_geth_int>;
+		interrupt-parent = <&pioB>;
+		interrupts = <25 IRQ_TYPE_EDGE_FALLING>;
+		txen-skew-ps = <800>;
+		txc-skew-ps = <3000>;
+		rxdv-skew-ps = <400>;
+		rxc-skew-ps = <3000>;
+		rxd0-skew-ps = <400>;
+		rxd1-skew-ps = <400>;
+		rxd2-skew-ps = <400>;
+		rxd3-skew-ps = <400>;
+	};
+};
+
+&macb1 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+
+	ethernet-phy@1 {
+		reg = <1>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_eth_int>;
+		interrupt-parent = <&pioC>;
+		interrupts = <10 IRQ_TYPE_EDGE_FALLING>;
+	};
+};
+
+&usb0 {
+	status = "okay";
+};
+
+&usb1 {
+	status = "okay";
+};
+
+&usb2 {
+	status = "okay";
+};
+
diff --git a/arch/arm/boot/dts/at91-dvk_su60_somc_lcm.dtsi b/arch/arm/boot/dts/at91-dvk_su60_somc_lcm.dtsi
new file mode 100644
index 0000000..4b9176d
--- /dev/null
+++ b/arch/arm/boot/dts/at91-dvk_su60_somc_lcm.dtsi
@@ -0,0 +1,90 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * at91-dvk_su60_somc_lcm.dtsi - Device Tree file for the DVK SOM60 LCD board
+ *
+ *  Copyright (C) 2018 Laird,
+ *		  2018 Ben Whitten <ben.whitten@lairdtech.com>
+ *
+ */
+
+/ {
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		pwms = <&hlcdc_pwm 0 50000 0>;
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <6>;
+		status = "okay";
+	};
+
+	panel: panel {
+		compatible = "winstar,wf70gtiagdng0", "innolux,at070tn92", "simple-panel";
+		backlight = <&backlight>;
+		power-supply = <&vcc_lcd_reg>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "okay";
+
+		port@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+
+			panel_input: endpoint@0 {
+				reg = <0>;
+				remote-endpoint = <&hlcdc_panel_output>;
+			};
+		};
+	};
+
+	vcc_lcd_reg: fixedregulator_lcd {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC LCM";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-boot-on;
+		regulator-always-on;
+		status = "okay";
+	};
+};
+
+&pinctrl {
+	board {
+		pinctrl_lcd_ctp_int: lcd_ctp_int {
+			 atmel,pins =
+				 <AT91_PIOC 28 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;
+		};
+	};
+};
+
+&i2c1 {
+	status = "okay";
+
+	ft5426@56 {
+		compatible = "focaltech,ft5426", "edt,edt-ft5406";
+		reg = <56>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_lcd_ctp_int>;
+
+		interrupt-parent = <&pioC>;
+		interrupts = <28 IRQ_TYPE_EDGE_FALLING>;
+
+		touchscreen-size-x = <800>;
+		touchscreen-size-y = <480>;
+	};
+};
+
+&hlcdc {
+	status = "okay";
+
+	hlcdc-display-controller {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_lcd_base &pinctrl_lcd_rgb888>;
+
+		port@0 {
+			hlcdc_panel_output: endpoint@0 {
+				reg = <0>;
+				remote-endpoint = <&panel_input>;
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/at91-som60.dtsi b/arch/arm/boot/dts/at91-som60.dtsi
new file mode 100644
index 0000000..6472fce
--- /dev/null
+++ b/arch/arm/boot/dts/at91-som60.dtsi
@@ -0,0 +1,231 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * at91-som60.dtsi - Device Tree file for the SOM60 module
+ *
+ *  Copyright (C) 2018 Laird,
+ *		  2018 Ben Whitten <ben.whitten@lairdtech.com>
+ *
+ */
+#include "sama5d36.dtsi"
+
+/ {
+	model = "Laird SOM60";
+	compatible = "laird,som60", "atmel,sama5d36", "atmel,sama5d3", "atmel,sama5";
+
+	chosen {
+		stdout-path = &dbgu;
+	};
+
+	memory {
+		reg = <0x20000000 0x8000000>;
+	};
+
+	clocks {
+		slow_xtal {
+			clock-frequency = <32768>;
+		};
+
+		main_xtal {
+			clock-frequency = <12000000>;
+		};
+	};
+};
+
+&pinctrl {
+	board {
+		pinctrl_mmc0_cd: mmc0_cd {
+			atmel,pins =
+				<AT91_PIOE 31 AT91_PERIPH_GPIO AT91_PINCTRL_DEGLITCH>;
+		};
+
+		pinctrl_mmc0_en: mmc0_en {
+			atmel,pins =
+				<AT91_PIOE 30 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+		};
+
+		pinctrl_nand0_wp: nand0_wp {
+			atmel,pins =
+				<AT91_PIOE 14 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP>;
+		};
+
+		pinctrl_usb_vbus: usb_vbus {
+			atmel,pins =
+				<AT91_PIOE 20 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+				/* Conflicts with USART2_SCK */
+		};
+
+		pinctrl_usart2_sck: usart2_sck {
+			atmel,pins =
+				<AT91_PIOE 20 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+				/* Conflicts with USB_VBUS */
+		};
+
+		pinctrl_usb_oc: usb_oc {
+			atmel,pins =
+				<AT91_PIOE 15 AT91_PERIPH_GPIO AT91_PINCTRL_DEGLITCH>;
+				/* Conflicts with USART3_SCK */
+		};
+
+		pinctrl_usart3_sck: usart3_sck {
+			atmel,pins =
+				<AT91_PIOE 15 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+				/* Conflicts with USB_OC */
+		};
+
+		pinctrl_usba_vbus: usba_vbus {
+		   atmel,pins =
+				<AT91_PIOC 14 AT91_PERIPH_GPIO AT91_PINCTRL_DEGLITCH>;
+		};
+
+		pinctrl_geth_int: geth_int {
+			atmel,pins =
+				<AT91_PIOB 25 AT91_PERIPH_GPIO AT91_PINCTRL_DEGLITCH>;
+				/* Conflicts with USART1_SCK */
+		};
+
+		pinctrl_usart1_sck: usart1_sck {
+			atmel,pins =
+				<AT91_PIOB 25 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+				/* Conflicts with GETH_INT */
+		};
+
+		pinctrl_eth_int: eth_int {
+			atmel,pins =
+				<AT91_PIOC 10 AT91_PERIPH_GPIO AT91_PINCTRL_DEGLITCH>;
+		};
+
+		pinctrl_pck2_as_audio_mck: pck2_as_audio_mck {
+			atmel,pins =
+				<AT91_PIOC 15 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+		};
+	};
+};
+
+&mmc0 {
+	slot@0 {
+		reg = <0>;
+		bus-width = <8>;
+	};
+};
+
+&mmc1 {
+	status = "okay";
+	slot@0 {
+		reg = <0>;
+		bus-width = <4>;
+	};
+};
+
+&spi0 {
+	cs-gpios = <&pioD 13 0>, <0>, <0>, <0>;
+};
+
+&usart0 {
+	atmel,use-dma-rx;
+	atmel,use-dma-tx;
+	status = "okay";
+	pinctrl-0 = <&pinctrl_usart0 &pinctrl_usart0_rts_cts>;
+};
+
+&usart1 {
+	pinctrl-0 = <&pinctrl_usart1 &pinctrl_usart1_rts_cts>;
+};
+
+&usart2 {
+	pinctrl-0 = <&pinctrl_usart2 &pinctrl_usart2_rts_cts>;
+};
+
+&usart3 {
+	pinctrl-0 = <&pinctrl_usart3 &pinctrl_usart3_rts_cts>;
+};
+
+&adc0 {
+	pinctrl-0 = <
+		&pinctrl_adc0_adtrg
+		&pinctrl_adc0_ad0
+		&pinctrl_adc0_ad1
+		&pinctrl_adc0_ad2
+		&pinctrl_adc0_ad3
+		&pinctrl_adc0_ad4
+		&pinctrl_adc0_ad5
+		>;
+};
+
+&macb0 {
+	phy-mode = "rgmii";
+};
+
+&macb1 {
+	phy-mode = "rmii";
+};
+
+
+&ebi {
+	pinctrl-0 = <&pinctrl_ebi_nand_addr>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&nand_controller {
+	status = "okay";
+
+	nand: nand@3 {
+		reg = <0x3 0x0 0x2>;
+		atmel,rb = <0>;
+		nand-bus-width = <8>;
+		nand-ecc-mode = "hw";
+		nand-ecc-strength = <8>;
+		nand-ecc-step-size = <512>;
+		nand-on-flash-bbt;
+		label = "atmel_nand";
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			ubootspl@0 {
+				label = "u-boot-spl";
+				reg = <0x0 0x20000>;
+			};
+
+			uboot@20000 {
+				label = "u-boot";
+				reg = <0x20000 0x80000>;
+			};
+
+			ubootenv@a0000 {
+				label = "u-boot-env";
+				reg = <0xa0000 0x20000>;
+			};
+
+			ubootenv@c0000 {
+				label = "u-boot-env";
+				reg = <0xc0000 0x20000>;
+			};
+
+			ubi@e0000 {
+				label = "ubi";
+				reg = <0xe0000 0xfe00000>;
+			};
+		};
+	};
+};
+
+&usb0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usba_vbus>;
+	atmel,vbus-gpio = <&pioC 14 GPIO_ACTIVE_HIGH>;
+};
+
+&usb1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usb_vbus &pinctrl_usb_oc>;
+	num-ports = <3>;
+	atmel,vbus-gpio = <0
+		&pioE 20 GPIO_ACTIVE_HIGH
+		0>;
+	atmel,oc-gpio = <0
+		&pioE 15 GPIO_ACTIVE_LOW
+		0>;
+};
-- 
2.7.4

Re: [PATCH v2 1/6] dt-bindings: add laird and giantec vendor prefix

[Rob Herring]

On Fri, Jun 15, 2018 at 02:40:50PM +0100, Ben Whitten wrote:
> This adds a vendor prefix "laird" for Laird PLC who make
> CPU modules and system on chips.
> Also adds "giantec" for Giantec Semiconductor, Inc. who
> make eeprom memory used on Laird designs.
> 
> Signed-off-by: Ben Whitten <ben.whitten@lairdtech.com>
> ---
>  Documentation/devicetree/bindings/vendor-prefixes.txt | 2 ++
>  1 file changed, 2 insertions(+)

Reviewed-by: Rob Herring <robh@kernel.org>

RE: [PATCH v2 4/6] arm: dts: add support for Laird WB50N cpu module and DVK

[Ben Whitten]

Hi Alexandre,

As you are planning a clock binding rework and this patch in the series
needs a change to account for that, do you want me to re-submit after
your series or are we good to go as is?

Thanks,
Ben
 
> This adds support for Lairds CPU module, featuring Atheros wifi, CSR
> Bluetooth and, Atmel SAMA5D3 CPU.
> https://www.lairdtech.com/products/wb50nbt-wi-fi-bluetooth-module
> 
> Signed-off-by: Ben Whitten <ben.whitten@lairdtech.com>
> ---
>  arch/arm/boot/dts/Makefile        |   1 +
>  arch/arm/boot/dts/at91-wb50n.dts  | 112 +++++++++++++++++++++
>  arch/arm/boot/dts/at91-wb50n.dtsi | 198
> ++++++++++++++++++++++++++++++++++++++
>  3 files changed, 311 insertions(+)
>  create mode 100644 arch/arm/boot/dts/at91-wb50n.dts
>  create mode 100644 arch/arm/boot/dts/at91-wb50n.dtsi
> 
> diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
> index 04604d2..07823be 100644
> --- a/arch/arm/boot/dts/Makefile
> +++ b/arch/arm/boot/dts/Makefile
> @@ -52,6 +52,7 @@ dtb-$(CONFIG_SOC_SAM_V7) += \
>  	at91-sama5d2_xplained.dtb \
>  	at91-sama5d3_xplained.dtb \
>  	at91-tse850-3.dtb \
> +	at91-wb50n.dtb \
>  	sama5d31ek.dtb \
>  	sama5d33ek.dtb \
>  	sama5d34ek.dtb \
> diff --git a/arch/arm/boot/dts/at91-wb50n.dts b/arch/arm/boot/dts/at91-
> wb50n.dts
> new file mode 100644
> index 0000000..8cecc70
> --- /dev/null
> +++ b/arch/arm/boot/dts/at91-wb50n.dts
> @@ -0,0 +1,112 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * at91-wb50n.dts - Device Tree file for wb50n evaluation board
> + *
> + *  Copyright (C) 2018 Laird
> + *
> + */
> +
> +/dts-v1/;
> +#include "at91-wb50n.dtsi"
> +
> +/ {
> +	model = "Laird Workgroup Bridge 50N - Atmel SAMA5D";
> +	compatible = "laird,wb50n", "atmel,sama5d31", "atmel,sama5d3",
> "atmel,sama5";
> +
> +	gpio_keys {
> +		compatible = "gpio-keys";
> +		#address-cells = <1>;
> +		#size-cells = <0>;
> +
> +		btn0@10 {
> +			reg = <10>;
> +			label = "BTNESC";
> +			linux,code = <1>; /* ESC button */
> +			gpios = <&pioA 10 GPIO_ACTIVE_LOW>;
> +			gpio-key,wakeup = <1>;
> +		};
> +
> +		irqbtn@31 {
> +			reg = <31>;
> +			label = "IRQBTN";
> +			linux,code = <99>; /* SysReq button */
> +			gpios = <&pioE 31 GPIO_ACTIVE_LOW>;
> +			gpio-key,wakeup = <1>;
> +		};
> +	};
> +
> +	leds {
> +		compatible = "gpio-leds";
> +
> +		led0 {
> +			label = "wb50n:blue:led0";
> +			gpios = <&pioA 12 GPIO_ACTIVE_LOW>;
> +			default-state = "off";
> +		};
> +
> +		led1 {
> +			label = "wb50n:green:led1";
> +			gpios = <&pioA 24 GPIO_ACTIVE_LOW>;
> +			default-state = "off";
> +		};
> +
> +		led2 {
> +			label = "wb50n:red:led2";
> +			gpios = <&pioA 26 GPIO_ACTIVE_LOW>;
> +			default-state = "off";
> +		};
> +	};
> +};
> +
> +&watchdog {
> +	status = "okay";
> +};
> +
> +&mmc0 {
> +	status = "okay";
> +};
> +
> +&macb1 {
> +	status = "okay";
> +};
> +
> +&dbgu {
> +	status = "okay";
> +};
> +
> +/* On BB40 this port is labeled UART1 */
> +&usart0 {
> +	status = "okay";
> +};
> +
> +/* On BB40 this port is labeled UART0 */
> +&usart1 {
> +	status = "okay";
> +};
> +
> +&i2c0 {
> +	status = "okay";
> +};
> +
> +&spi1 {
> +	status = "okay";
> +
> +	spidev@0 {
> +		compatible = "spidev";
> +		reg = <0>;
> +		spi-max-frequency = <8000000>;
> +	};
> +};
> +
> +&usb0 {
> +	status = "okay";
> +};
> +
> +&usb1 {
> +	status = "okay";
> +};
> +
> +&usb2 {
> +	status = "okay";
> +};
> +
> diff --git a/arch/arm/boot/dts/at91-wb50n.dtsi b/arch/arm/boot/dts/at91-
> wb50n.dtsi
> new file mode 100644
> index 0000000..85692c8
> --- /dev/null
> +++ b/arch/arm/boot/dts/at91-wb50n.dtsi
> @@ -0,0 +1,198 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * at91-wb50n.dtsi - Device Tree include file for wb50n cpu module
> + *
> + *  Copyright (C) 2018 Laird
> + *
> + */
> +
> +#include "sama5d31.dtsi"
> +
> +/ {
> +	model = "Laird Workgroup Bridge 50N - Atmel SAMA5D";
> +	compatible = "laird,wb50n", "atmel,sama5d31", "atmel,sama5d3",
> "atmel,sama5";
> +
> +	chosen {
> +		bootargs = "ubi.mtd=6 root=ubi0:rootfs rootfstype=ubifs
> rw";
> +		stdout-path = "serial0:115200n8";
> +	};
> +
> +	memory {
> +		reg = <0x20000000 0x4000000>;
> +	};
> +};
> +
> +&pinctrl {
> +	board {
> +		pinctrl_mmc0_cd: mmc0_cd {
> +			atmel,pins = <AT91_PIOC 26 AT91_PERIPH_GPIO
> AT91_PINCTRL_PULL_UP_DEGLITCH>; /* PC26 GPIO with pullup deglitch */
> +		};
> +
> +		pinctrl_usba_vbus: usba_vbus {
> +			atmel,pins = <AT91_PIOB 13 AT91_PERIPH_GPIO
> AT91_PINCTRL_DEGLITCH>; /* PB13 GPIO with deglitch */
> +		};
> +	};
> +};
> +
> +&slow_xtal {
> +	clock-frequency = <32768>;
> +};
> +
> +&main_xtal {
> +	clock-frequency = <12000000>;
> +};
> +
> +&slow_osc {
> +	atmel,osc-bypass;
> +};
> +
> +&usart1_clk {
> +	atmel,clk-output-range = <0 132000000>;
> +};
> +
> +&mmc0 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_mmc0_clk_cmd_dat0 &pinctrl_mmc0_dat1_3
> &pinctrl_mmc0_cd>;
> +	cd-gpios = <&pioC 26 GPIO_ACTIVE_LOW>;
> +	slot@0 {
> +		reg = <0>;
> +		bus-width = <4>;
> +	};
> +};
> +
> +&mmc1 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_mmc1_clk_cmd_dat0 &pinctrl_mmc1_dat1_3>;
> +	status = "okay";
> +	atheros@0 {
> +		compatible = "atheros,ath6kl";
> +		atheros,board-id = "SD32";
> +		reg = <0>;
> +		bus-width = <4>;
> +	};
> +};
> +
> +&macb1 {
> +	phy-mode = "rmii";
> +};
> +
> +&dbgu {
> +	dmas = <0>, <0>;	/*  Do not use DMA for dbgu */
> +};
> +
> +/* On BB40 this port is labeled UART1 */
> +&usart0 {
> +	atmel,use-dma-rx;
> +	atmel,use-dma-tx;
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_usart0 &pinctrl_usart0_rts_cts>;
> +};
> +
> +/* On BB40 this port is labeled UART0 */
> +&usart1 {
> +	atmel,use-dma-rx;
> +	atmel,use-dma-tx;
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_usart1 &pinctrl_usart1_rts_cts>;
> +	dtr-gpios = <&pioD 13 GPIO_ACTIVE_LOW>;
> +	dsr-gpios = <&pioD 11 GPIO_ACTIVE_LOW>;
> +	dcd-gpios = <&pioD 7 GPIO_ACTIVE_LOW>;
> +	rng-gpios = <&pioD 8 GPIO_ACTIVE_LOW>;
> +};
> +
> +/* USART3 is direct-connect to the Bluetooth UART on the radio SIP */
> +&usart3 {
> +	atmel,use-dma-rx;
> +	atmel,use-dma-tx;
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_usart3 &pinctrl_usart3_rts_cts>;
> +	status = "okay";
> +};
> +
> +&spi1 {
> +	cs-gpios = <&pioC 25 0>, <0>, <0>, <0>;
> +};
> +
> +&ebi {
> +	pinctrl-0 = <&pinctrl_ebi_nand_addr>;
> +	pinctrl-names = "default";
> +	status = "okay";
> +};
> +
> +&nand_controller {
> +	status = "okay";
> +
> +	nand: nand@3 {
> +		reg = <0x3 0x0 0x2>;
> +		atmel,rb = <0>;
> +		nand-bus-width = <8>;
> +		nand-ecc-mode = "hw";
> +		nand-ecc-strength = <8>;
> +		nand-ecc-step-size = <512>;
> +		nand-on-flash-bbt;
> +		label = "atmel_nand";
> +
> +		partitions {
> +			compatible = "fixed-partitions";
> +			#address-cells = <1>;
> +			#size-cells = <1>;
> +
> +			at91bootstrap@0 {
> +				label = "at91bs";
> +				reg = <0x0 0x20000>;
> +			};
> +
> +			uboot@20000 {
> +				label = "u-boot";
> +				reg = <0x20000 0x80000>;
> +			};
> +
> +			ubootenv@a0000 {
> +				label = "u-boot-env";
> +				reg = <0xa0000 0x20000>;
> +			};
> +
> +			ubootenv@c0000 {
> +				label = "u-boot-env";
> +				reg = <0xc0000 0x20000>;
> +			};
> +
> +			kernel-a@e0000 {
> +				label = "kernel-a";
> +				reg = <0xe0000 0x500000>;
> +			};
> +
> +			kernel-b@5e0000 {
> +				label = "kernel-b";
> +				reg = <0x5e0000 0x500000>;
> +			};
> +
> +			rootfs-a@ae0000 {
> +				label = "rootfs-a";
> +				reg = <0xae0000 0x3000000>;
> +			};
> +
> +			rootfs-b@3ae0000 {
> +				label = "rootfs-b";
> +				reg = <0x3ae0000 0x3000000>;
> +			};
> +
> +			user@6ae0000 {
> +				label = "user";
> +				reg = <0x6ae0000 0x14e0000>;
> +			};
> +		};
> +	};
> +};
> +
> +&usb0 {
> +	atmel,vbus-gpio = <&pioB 13 GPIO_ACTIVE_LOW>;
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_usba_vbus>;
> +};
> +
> +&usb1 {
> +	num-ports = <3>;
> +	atmel,vbus-gpio = <&pioA 2 GPIO_ACTIVE_LOW>;
> +	atmel,oc-gpio = <&pioA 4 GPIO_ACTIVE_LOW>;
> +};
> --
> 2.7.4

Re: [PATCH v2 4/6] arm: dts: add support for Laird WB50N cpu module and DVK

[Alexandre Belloni]

On 27/06/2018 08:42:17+0000, Ben Whitten wrote:
> Hi Alexandre,
> 
> As you are planning a clock binding rework and this patch in the series
> needs a change to account for that, do you want me to re-submit after
> your series or are we good to go as is?
> 

No change needed from you, I'll take care of the necessary changes.

-- 
Alexandre Belloni, Bootlin (formerly Free Electrons)
Embedded Linux and Kernel engineering
https://bootlin.com

Re: [PATCH v2 4/6] arm: dts: add support for Laird WB50N cpu module and DVK

[Alexandre Belloni]

Hi,

I've now applied the whole series after fixing two small whitespace
issues.

On 15/06/2018 14:40:53+0100, Ben Whitten wrote:
> +&usart1_clk {
> +	atmel,clk-output-range = <0 132000000>;
> +};
> +

But this is not actually allowed by the hardware (well, it is but it
will lead to issues) and will be removed once the clock binding is
reworked.

-- 
Alexandre Belloni, Bootlin (formerly Free Electrons)
Embedded Linux and Kernel engineering
https://bootlin.com

RE: [PATCH v2 4/6] arm: dts: add support for Laird WB50N cpu module and DVK

[Ben Whitten]

> Subject: Re: [PATCH v2 4/6] arm: dts: add support for Laird
> WB50N cpu module and DVK
> 
> Hi,
> 
> I've now applied the whole series after fixing two small
> whitespace
> issues.

Thanks!

> On 15/06/2018 14:40:53+0100, Ben Whitten wrote:
> > +&usart1_clk {
> > +	atmel,clk-output-range = <0 132000000>;
> > +};
> > +
> 
> But this is not actually allowed by the hardware (well, it is
> but it
> will lead to issues) and will be removed once the clock
> binding is
> reworked.

Of course no problem, thanks again.

Ben