linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Aapo Vienamo <avienamo@nvidia.com>
To: Rob Herring <robh+dt@kernel.org>,
	Mark Rutland <mark.rutland@arm.com>,
	Thierry Reding <thierry.reding@gmail.com>,
	Jonathan Hunter <jonathanh@nvidia.com>,
	Mikko Perttunen <mperttunen@nvidia.com>
Cc: Aapo Vienamo <avienamo@nvidia.com>, <devicetree@vger.kernel.org>,
	<linux-tegra@vger.kernel.org>, <linux-kernel@vger.kernel.org>
Subject: [PATCH 1/6] soc/tegra: pmc: Fix pad voltage configuration for Tegra186
Date: Tue, 10 Jul 2018 15:47:54 +0300	[thread overview]
Message-ID: <1531226879-11802-2-git-send-email-avienamo@nvidia.com> (raw)
In-Reply-To: <1531226879-11802-1-git-send-email-avienamo@nvidia.com>

Implement support for the PMC_IMPL_E_33V_PWR register which replaces
PMC_PWR_DET register interface of the SoC generations preceding
Tegra186. Also add the voltage bit offsets to the tegra186_io_pads[]
table.

Signed-off-by: Aapo Vienamo <avienamo@nvidia.com>
---
 drivers/soc/tegra/pmc.c | 54 +++++++++++++++++++++++++++++++++----------------
 1 file changed, 37 insertions(+), 17 deletions(-)

diff --git a/drivers/soc/tegra/pmc.c b/drivers/soc/tegra/pmc.c
index 2d6f3fc..5bea3b9 100644
--- a/drivers/soc/tegra/pmc.c
+++ b/drivers/soc/tegra/pmc.c
@@ -65,6 +65,8 @@
 
 #define PWRGATE_STATUS			0x38
 
+#define PMC_IMPL_E_33V_PWR		0x40
+
 #define PMC_PWR_DET			0x48
 
 #define PMC_SCRATCH0_MODE_RECOVERY	BIT(31)
@@ -154,6 +156,7 @@ struct tegra_pmc_soc {
 	bool has_tsense_reset;
 	bool has_gpu_clamps;
 	bool needs_mbist_war;
+	bool has_impl_33v_pwr;
 
 	const struct tegra_io_pad_soc *io_pads;
 	unsigned int num_io_pads;
@@ -1073,20 +1076,29 @@ int tegra_io_pad_set_voltage(enum tegra_io_pad id,
 
 	mutex_lock(&pmc->powergates_lock);
 
-	/* write-enable PMC_PWR_DET_VALUE[pad->voltage] */
-	value = tegra_pmc_readl(PMC_PWR_DET);
-	value |= BIT(pad->voltage);
-	tegra_pmc_writel(value, PMC_PWR_DET);
+	if (pmc->soc->has_impl_33v_pwr) {
+		value = tegra_pmc_readl(PMC_IMPL_E_33V_PWR);
+		if (voltage == TEGRA_IO_PAD_1800000UV)
+			value &= ~BIT(pad->voltage);
+		else
+			value |= BIT(pad->voltage);
+		tegra_pmc_writel(value, PMC_IMPL_E_33V_PWR);
+	} else {
+		/* write-enable PMC_PWR_DET_VALUE[pad->voltage] */
+		value = tegra_pmc_readl(PMC_PWR_DET);
+		value |= BIT(pad->voltage);
+		tegra_pmc_writel(value, PMC_PWR_DET);
 
-	/* update I/O voltage */
-	value = tegra_pmc_readl(PMC_PWR_DET_VALUE);
+		/* update I/O voltage */
+		value = tegra_pmc_readl(PMC_PWR_DET_VALUE);
 
-	if (voltage == TEGRA_IO_PAD_1800000UV)
-		value &= ~BIT(pad->voltage);
-	else
-		value |= BIT(pad->voltage);
+		if (voltage == TEGRA_IO_PAD_1800000UV)
+			value &= ~BIT(pad->voltage);
+		else
+			value |= BIT(pad->voltage);
 
-	tegra_pmc_writel(value, PMC_PWR_DET_VALUE);
+		tegra_pmc_writel(value, PMC_PWR_DET_VALUE);
+	}
 
 	mutex_unlock(&pmc->powergates_lock);
 
@@ -1108,7 +1120,10 @@ int tegra_io_pad_get_voltage(enum tegra_io_pad id)
 	if (pad->voltage == UINT_MAX)
 		return -ENOTSUPP;
 
-	value = tegra_pmc_readl(PMC_PWR_DET_VALUE);
+	if (pmc->soc->has_impl_33v_pwr)
+		value = tegra_pmc_readl(PMC_IMPL_E_33V_PWR);
+	else
+		value = tegra_pmc_readl(PMC_PWR_DET_VALUE);
 
 	if ((value & BIT(pad->voltage)) == 0)
 		return TEGRA_IO_PAD_1800000UV;
@@ -1567,6 +1582,7 @@ static const struct tegra_pmc_soc tegra30_pmc_soc = {
 	.cpu_powergates = tegra30_cpu_powergates,
 	.has_tsense_reset = true,
 	.has_gpu_clamps = false,
+	.has_impl_33v_pwr = false,
 	.num_io_pads = 0,
 	.io_pads = NULL,
 	.regs = &tegra20_pmc_regs,
@@ -1609,6 +1625,7 @@ static const struct tegra_pmc_soc tegra114_pmc_soc = {
 	.cpu_powergates = tegra114_cpu_powergates,
 	.has_tsense_reset = true,
 	.has_gpu_clamps = false,
+	.has_impl_33v_pwr = false,
 	.num_io_pads = 0,
 	.io_pads = NULL,
 	.regs = &tegra20_pmc_regs,
@@ -1689,6 +1706,7 @@ static const struct tegra_pmc_soc tegra124_pmc_soc = {
 	.cpu_powergates = tegra124_cpu_powergates,
 	.has_tsense_reset = true,
 	.has_gpu_clamps = true,
+	.has_impl_33v_pwr = false,
 	.num_io_pads = ARRAY_SIZE(tegra124_io_pads),
 	.io_pads = tegra124_io_pads,
 	.regs = &tegra20_pmc_regs,
@@ -1778,6 +1796,7 @@ static const struct tegra_pmc_soc tegra210_pmc_soc = {
 	.cpu_powergates = tegra210_cpu_powergates,
 	.has_tsense_reset = true,
 	.has_gpu_clamps = true,
+	.has_impl_33v_pwr = false,
 	.needs_mbist_war = true,
 	.num_io_pads = ARRAY_SIZE(tegra210_io_pads),
 	.io_pads = tegra210_io_pads,
@@ -1806,7 +1825,7 @@ static const struct tegra_io_pad_soc tegra186_io_pads[] = {
 	{ .id = TEGRA_IO_PAD_HDMI_DP0, .dpd = 28, .voltage = UINT_MAX },
 	{ .id = TEGRA_IO_PAD_HDMI_DP1, .dpd = 29, .voltage = UINT_MAX },
 	{ .id = TEGRA_IO_PAD_PEX_CNTRL, .dpd = 32, .voltage = UINT_MAX },
-	{ .id = TEGRA_IO_PAD_SDMMC2_HV, .dpd = 34, .voltage = UINT_MAX },
+	{ .id = TEGRA_IO_PAD_SDMMC2_HV, .dpd = 34, .voltage = 5 },
 	{ .id = TEGRA_IO_PAD_SDMMC4, .dpd = 36, .voltage = UINT_MAX },
 	{ .id = TEGRA_IO_PAD_CAM, .dpd = 38, .voltage = UINT_MAX },
 	{ .id = TEGRA_IO_PAD_DSIB, .dpd = 40, .voltage = UINT_MAX },
@@ -1818,12 +1837,12 @@ static const struct tegra_io_pad_soc tegra186_io_pads[] = {
 	{ .id = TEGRA_IO_PAD_CSIF, .dpd = 46, .voltage = UINT_MAX },
 	{ .id = TEGRA_IO_PAD_SPI, .dpd = 47, .voltage = UINT_MAX },
 	{ .id = TEGRA_IO_PAD_UFS, .dpd = 49, .voltage = UINT_MAX },
-	{ .id = TEGRA_IO_PAD_DMIC_HV, .dpd = 52, .voltage = UINT_MAX },
+	{ .id = TEGRA_IO_PAD_DMIC_HV, .dpd = 52, .voltage = 2 },
 	{ .id = TEGRA_IO_PAD_EDP, .dpd = 53, .voltage = UINT_MAX },
-	{ .id = TEGRA_IO_PAD_SDMMC1_HV, .dpd = 55, .voltage = UINT_MAX },
-	{ .id = TEGRA_IO_PAD_SDMMC3_HV, .dpd = 56, .voltage = UINT_MAX },
+	{ .id = TEGRA_IO_PAD_SDMMC1_HV, .dpd = 55, .voltage = 4 },
+	{ .id = TEGRA_IO_PAD_SDMMC3_HV, .dpd = 56, .voltage = 6 },
 	{ .id = TEGRA_IO_PAD_CONN, .dpd = 60, .voltage = UINT_MAX },
-	{ .id = TEGRA_IO_PAD_AUDIO_HV, .dpd = 61, .voltage = UINT_MAX },
+	{ .id = TEGRA_IO_PAD_AUDIO_HV, .dpd = 61, .voltage = 1 },
 };
 
 static const struct tegra_pmc_regs tegra186_pmc_regs = {
@@ -1876,6 +1895,7 @@ static const struct tegra_pmc_soc tegra186_pmc_soc = {
 	.cpu_powergates = NULL,
 	.has_tsense_reset = false,
 	.has_gpu_clamps = false,
+	.has_impl_33v_pwr = true,
 	.num_io_pads = ARRAY_SIZE(tegra186_io_pads),
 	.io_pads = tegra186_io_pads,
 	.regs = &tegra186_pmc_regs,
-- 
2.7.4


  reply	other threads:[~2018-07-10 12:48 UTC|newest]

Thread overview: 19+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-07-10 12:47 [PATCH 0/6] Tegra PMC pinctrl pad configuration Aapo Vienamo
2018-07-10 12:47 ` Aapo Vienamo [this message]
2018-07-11  8:08   ` [PATCH 1/6] soc/tegra: pmc: Fix pad voltage configuration for Tegra186 Jon Hunter
2018-07-10 12:47 ` [PATCH 2/6] soc/tegra: pmc: Factor out DPD register bit calculation Aapo Vienamo
2018-07-11  8:24   ` Jon Hunter
2018-07-10 12:47 ` [PATCH 3/6] soc/tegra: pmc: Implement tegra_io_pad_is_powered() Aapo Vienamo
2018-07-11  8:27   ` Jon Hunter
2018-07-10 12:47 ` [PATCH 4/6] soc/tegra: pmc: Use X macro to generate IO pad tables Aapo Vienamo
2018-07-11  8:30   ` Jon Hunter
2018-07-11  9:23     ` Aapo Vienamo
2018-07-11  9:43       ` Jon Hunter
2018-07-10 12:54 ` [PATCH 5/6] dt-bindings: Add Tegra PMC pad configuration bindings Aapo Vienamo
2018-07-11  8:32   ` Jon Hunter
2018-07-10 12:54 ` [PATCH 6/6] soc/tegra: pmc: Implement pad configuration via pinctrl Aapo Vienamo
2018-07-11  8:40   ` Jon Hunter
2018-07-11  9:38     ` Aapo Vienamo
2018-07-11  9:46       ` Jon Hunter
2018-07-11 10:12         ` Aapo Vienamo
2018-07-11 11:42           ` Jon Hunter

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1531226879-11802-2-git-send-email-avienamo@nvidia.com \
    --to=avienamo@nvidia.com \
    --cc=devicetree@vger.kernel.org \
    --cc=jonathanh@nvidia.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-tegra@vger.kernel.org \
    --cc=mark.rutland@arm.com \
    --cc=mperttunen@nvidia.com \
    --cc=robh+dt@kernel.org \
    --cc=thierry.reding@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).