linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Corentin Labbe <clabbe@baylibre.com>
To: hdegoede@redhat.com, linux@armlinux.org.uk, mark.rutland@arm.com,
	maxime.ripard@free-electrons.com, robh+dt@kernel.org,
	tj@kernel.org, wens@csie.org
Cc: devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
	linux-ide@vger.kernel.org, linux-kernel@vger.kernel.org,
	linux-sunxi@googlegroups.com, thierry.reding@gmail.com,
	icenowy@aosc.io, Corentin Labbe <clabbe@baylibre.com>
Subject: [PATCH v3 6/9] ata: ahci_platform: add support for port regulator
Date: Fri, 13 Jul 2018 11:03:03 +0000	[thread overview]
Message-ID: <1531479786-4911-7-git-send-email-clabbe@baylibre.com> (raw)
In-Reply-To: <1531479786-4911-1-git-send-email-clabbe@baylibre.com>

The SoC R40 AHCI controller need a port regulator to work.
We cannot use the "target-supply" since it's not a target power regulator.
So this patch add a way to add an optional port regulator.

Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
---
 drivers/ata/ahci.h             |  1 +
 drivers/ata/libahci_platform.c | 47 +++++++++++++++++++++++++++++++++++++-----
 2 files changed, 43 insertions(+), 5 deletions(-)

diff --git a/drivers/ata/ahci.h b/drivers/ata/ahci.h
index 274c1885a5ad..716fd679dd3e 100644
--- a/drivers/ata/ahci.h
+++ b/drivers/ata/ahci.h
@@ -352,6 +352,7 @@ struct ahci_host_priv {
 	bool			got_runtime_pm; /* Did we do pm_runtime_get? */
 	struct clk		*clks[AHCI_MAX_CLKS]; /* Optional */
 	struct regulator	**target_pwrs;	/* Optional */
+	struct regulator	**port_regulators;/* Optional */
 	struct regulator	*ahci_regulator;/* Optional */
 	struct reset_control	*ahci_reset;	/* Optional */
 	/*
diff --git a/drivers/ata/libahci_platform.c b/drivers/ata/libahci_platform.c
index 1199ba411c15..d7574b3e1f6a 100644
--- a/drivers/ata/libahci_platform.c
+++ b/drivers/ata/libahci_platform.c
@@ -148,7 +148,7 @@ EXPORT_SYMBOL_GPL(ahci_platform_disable_clks);
  */
 int ahci_platform_enable_regulators(struct ahci_host_priv *hpriv)
 {
-	int rc, i;
+	int rc, i, j;
 
 	if (hpriv->ahci_regulator) {
 		rc = regulator_enable(hpriv->ahci_regulator);
@@ -164,9 +164,21 @@ int ahci_platform_enable_regulators(struct ahci_host_priv *hpriv)
 		if (rc)
 			goto disable_target_pwrs;
 	}
+	for (j = 0; j < hpriv->nports; j++) {
+		if (!hpriv->port_regulators[j])
+			continue;
+
+		rc = regulator_enable(hpriv->port_regulators[j]);
+		if (rc)
+			goto disable_port_regulators;
+	}
 
 	return 0;
 
+disable_port_regulators:
+	while (--j >= 0)
+		if (hpriv->port_regulators[j])
+			regulator_disable(hpriv->port_regulators[j]);
 disable_target_pwrs:
 	while (--i >= 0)
 		if (hpriv->target_pwrs[i])
@@ -190,9 +202,10 @@ void ahci_platform_disable_regulators(struct ahci_host_priv *hpriv)
 	int i;
 
 	for (i = 0; i < hpriv->nports; i++) {
-		if (!hpriv->target_pwrs[i])
-			continue;
-		regulator_disable(hpriv->target_pwrs[i]);
+		if (hpriv->target_pwrs[i])
+			regulator_disable(hpriv->target_pwrs[i]);
+		if (hpriv->port_regulators[i])
+			regulator_disable(hpriv->port_regulators[i]);
 	}
 
 	if (hpriv->ahci_regulator)
@@ -291,9 +304,12 @@ static void ahci_platform_put_resources(struct device *dev, void *res)
 	 * SATA device itself. So we can't use devm for automatically
 	 * releasing them. We have to do it manually here.
 	 */
-	for (c = 0; c < hpriv->nports; c++)
+	for (c = 0; c < hpriv->nports; c++) {
 		if (hpriv->target_pwrs && hpriv->target_pwrs[c])
 			regulator_put(hpriv->target_pwrs[c]);
+		if (hpriv->port_regulators && hpriv->port_regulators[c])
+			regulator_put(hpriv->port_regulators[c]);
+	}
 }
 
 static int ahci_platform_get_phy(struct ahci_host_priv *hpriv, u32 port,
@@ -338,6 +354,7 @@ static int ahci_platform_get_regulator(struct ahci_host_priv *hpriv, u32 port,
 				struct device *dev)
 {
 	struct regulator *target_pwr;
+	struct regulator *port_regulator;
 	int rc = 0;
 
 	target_pwr = regulator_get_optional(dev, "target");
@@ -346,6 +363,21 @@ static int ahci_platform_get_regulator(struct ahci_host_priv *hpriv, u32 port,
 		hpriv->target_pwrs[port] = target_pwr;
 	else
 		rc = PTR_ERR(target_pwr);
+	/* Only EPROBE_DEFER is important since it's an optional regulator */
+	if (rc != -EPROBE_DEFER)
+		rc = 0;
+	else
+		return rc;
+
+	port_regulator = regulator_get_optional(dev, "port");
+
+	if (!IS_ERR(port_regulator))
+		hpriv->port_regulators[port] = port_regulator;
+	else
+		rc = PTR_ERR(port_regulator);
+	/* Only EPROBE_DEFER is important since it's an optional regulator */
+	if (rc != -EPROBE_DEFER)
+		rc = 0;
 
 	return rc;
 }
@@ -454,6 +486,11 @@ struct ahci_host_priv *ahci_platform_get_resources(struct platform_device *pdev)
 		rc = -ENOMEM;
 		goto err_out;
 	}
+	hpriv->port_regulators = devm_kcalloc(dev, hpriv->nports, sizeof(*hpriv->port_regulators), GFP_KERNEL);
+	if (!hpriv->port_regulators) {
+		rc = -ENOMEM;
+		goto err_out;
+	}
 
 	if (child_nodes) {
 		for_each_child_of_node(dev->of_node, child) {
-- 
2.16.4


  parent reply	other threads:[~2018-07-13 11:03 UTC|newest]

Thread overview: 19+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-07-13 11:02 [PATCH v3 0/9] ata: ahci_platform: support allwinner R40 AHCI Corentin Labbe
2018-07-13 11:02 ` [PATCH v3 1/9] ata: ahci_platform: add support for AHCI controller regulator Corentin Labbe
2018-07-13 11:02 ` [PATCH v3 2/9] dt-bindings: ata: ahci-platform: document ahci-supply Corentin Labbe
2018-07-16 15:49   ` Rob Herring
2018-07-13 11:03 ` [PATCH v3 3/9] ata: ahci_platform: add support for AHCI controller reset Corentin Labbe
2018-07-13 11:03 ` [PATCH v3 4/9] dt-bindings: ata: ahci-platform: document AHCI reset Corentin Labbe
2018-07-13 12:44   ` Maxime Ripard
2018-07-16 15:54   ` Rob Herring
2018-07-17 11:16     ` LABBE Corentin
2018-07-13 11:03 ` [PATCH v3 5/9] dt-bindings: ata: ahci-platform: fix indentation of target-supply Corentin Labbe
2018-07-16 15:55   ` Rob Herring
2018-07-13 11:03 ` Corentin Labbe [this message]
2018-07-13 11:07   ` [PATCH v3 6/9] ata: ahci_platform: add support for port regulator Icenowy Zheng
2018-07-13 11:03 ` [PATCH v3 7/9] dt-bindings: ata: ahci-platform: document port-supply Corentin Labbe
2018-07-16 15:59   ` Rob Herring
2018-07-16 16:02     ` Icenowy Zheng
2018-07-13 11:03 ` [PATCH v3 8/9] ARM: dts: sun8i: r40: add sata node Corentin Labbe
2018-07-13 11:03 ` [PATCH v3 9/9] ARM: dts: sun8i: sun8i-r40-bananapi-m2-ultra: enable AHCI Corentin Labbe
2018-07-19  0:16 ` [PATCH v3 0/9] ata: ahci_platform: support allwinner R40 AHCI Simon Baatz

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1531479786-4911-7-git-send-email-clabbe@baylibre.com \
    --to=clabbe@baylibre.com \
    --cc=devicetree@vger.kernel.org \
    --cc=hdegoede@redhat.com \
    --cc=icenowy@aosc.io \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-ide@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-sunxi@googlegroups.com \
    --cc=linux@armlinux.org.uk \
    --cc=mark.rutland@arm.com \
    --cc=maxime.ripard@free-electrons.com \
    --cc=robh+dt@kernel.org \
    --cc=thierry.reding@gmail.com \
    --cc=tj@kernel.org \
    --cc=wens@csie.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).