[v6 0/4] mpt3sas: Hot-Plug Surprise removal support on IOC.

[v6 0/4] mpt3sas: Hot-Plug Surprise removal support on IOC.

[Suganath Prabu]

v6 Change set:
Incorporated changes as suggested by Andy.
In Patch 1 converted while loop to do while in
function mpt3sas_wait_for_ioc_to_operational().
And in patch 3 removed parentheses.

V5 Change set:
V5 post has only defect fixes.
We are reworking and incorporating the suggestions from Bjorn.
And after covering tests, we ll be post Hot-Plug Surprise
 removal patches.

V4 Change set:
Reframe split strings in print statement, to avoid

V3 Change Set:
Simplified function "mpt3sas_base_pci_device_is_available" and
made inline

V2 changes:
Replaced mpt3sas_base_pci_device_is_unplugged with
pci_device_is_present.

V1 changes:
In Patch 0001 - unlock mutex, if active reset is in progress.
Suganath Prabu (4):
  mpt3sas: Separate out mpt3sas_wait_for_ioc_to_operational
  mpt3sas: Fix Sync cache command failure during driver unload
  mpt3sas:Fix driver modifying persistent data.
  mpt3sas: Bump driver version to 27.100.00.00.

 drivers/scsi/mpt3sas/mpt3sas_base.c      | 75 ++++++++++++++++++--------------
 drivers/scsi/mpt3sas/mpt3sas_base.h      |  8 +++-
 drivers/scsi/mpt3sas/mpt3sas_config.c    | 28 +++---------
 drivers/scsi/mpt3sas/mpt3sas_ctl.c       | 21 ++-------
 drivers/scsi/mpt3sas/mpt3sas_scsih.c     | 38 +++++++++++++++-
 drivers/scsi/mpt3sas/mpt3sas_transport.c | 70 ++++++-----------------------
 6 files changed, 106 insertions(+), 134 deletions(-)

-- 
1.8.3.1

[v6 1/4] mpt3sas: Separate out mpt3sas_wait_for_ioc_to_operational

[Suganath Prabu]

No functional changes. This section of code
 "wait for IOC to be operational" is used in many places
 across the driver, and hence moved this code in to
 a function "mpt3sas_wait_for_ioc_to_operational()"

Signed-off-by: Suganath Prabu <suganath-prabu.subramani@broadcom.com>
---
 drivers/scsi/mpt3sas/mpt3sas_base.c      | 73 ++++++++++++++++++--------------
 drivers/scsi/mpt3sas/mpt3sas_base.h      |  4 ++
 drivers/scsi/mpt3sas/mpt3sas_config.c    | 24 +++--------
 drivers/scsi/mpt3sas/mpt3sas_ctl.c       | 21 ++-------
 drivers/scsi/mpt3sas/mpt3sas_transport.c | 63 ++++-----------------------
 5 files changed, 62 insertions(+), 123 deletions(-)

diff --git a/drivers/scsi/mpt3sas/mpt3sas_base.c b/drivers/scsi/mpt3sas/mpt3sas_base.c
index 166b607..243bf32 100644
--- a/drivers/scsi/mpt3sas/mpt3sas_base.c
+++ b/drivers/scsi/mpt3sas/mpt3sas_base.c
@@ -5079,6 +5079,41 @@ _base_send_ioc_reset(struct MPT3SAS_ADAPTER *ioc, u8 reset_type, int timeout)
 }
 
 /**
+ * mpt3sas_wait_for_ioc_to_operational - IOC's operational
+ *		state and HBA hot unplug status are checked here.
+ * @ioc: per adapter object
+ * @wait_count: timeout in seconds
+ *
+ * Return: Waits up to timeout seconds for the IOC to
+ * become operational. Returns 0 if IOC is present
+ * and operational; otherwise returns -EFAULT.
+ */
+
+int
+mpt3sas_wait_for_ioc_to_operational(struct MPT3SAS_ADAPTER *ioc,
+	int timeout)
+{
+	int wait_state_count = 0;
+	u32 ioc_state;
+
+	do {
+		ioc_state = mpt3sas_base_get_iocstate(ioc, 1);
+		if (ioc_state == MPI2_IOC_STATE_OPERATIONAL)
+			break;
+		ssleep(1);
+		ioc_info(ioc, "%s: waiting for operational state(count=%d)\n",
+				__func__, ++wait_state_count);
+	} while (--timeout);
+	if (!timeout) {
+		ioc_err(ioc, "%s: failed due to ioc not operational\n", __func__);
+		return -EFAULT;
+	}
+	if (wait_state_count)
+		ioc_info(ioc, "ioc is operational\n");
+	return 0;
+}
+
+/**
  * _base_handshake_req_reply_wait - send request thru doorbell interface
  * @ioc: per adapter object
  * @request_bytes: request length
@@ -5212,11 +5247,9 @@ mpt3sas_base_sas_iounit_control(struct MPT3SAS_ADAPTER *ioc,
 	Mpi2SasIoUnitControlRequest_t *mpi_request)
 {
 	u16 smid;
-	u32 ioc_state;
 	u8 issue_reset = 0;
 	int rc;
 	void *request;
-	u16 wait_state_count;
 
 	dinitprintk(ioc, ioc_info(ioc, "%s\n", __func__));
 
@@ -5228,20 +5261,9 @@ mpt3sas_base_sas_iounit_control(struct MPT3SAS_ADAPTER *ioc,
 		goto out;
 	}
 
-	wait_state_count = 0;
-	ioc_state = mpt3sas_base_get_iocstate(ioc, 1);
-	while (ioc_state != MPI2_IOC_STATE_OPERATIONAL) {
-		if (wait_state_count++ == 10) {
-			ioc_err(ioc, "%s: failed due to ioc not operational\n",
-				__func__);
-			rc = -EFAULT;
-			goto out;
-		}
-		ssleep(1);
-		ioc_state = mpt3sas_base_get_iocstate(ioc, 1);
-		ioc_info(ioc, "%s: waiting for operational state(count=%d)\n",
-			 __func__, wait_state_count);
-	}
+	rc = mpt3sas_wait_for_ioc_to_operational(ioc, IOC_OPERATIONAL_WAIT_COUNT);
+	if (rc)
+		goto out;
 
 	smid = mpt3sas_base_get_smid(ioc, ioc->base_cb_idx);
 	if (!smid) {
@@ -5307,11 +5329,9 @@ mpt3sas_base_scsi_enclosure_processor(struct MPT3SAS_ADAPTER *ioc,
 	Mpi2SepReply_t *mpi_reply, Mpi2SepRequest_t *mpi_request)
 {
 	u16 smid;
-	u32 ioc_state;
 	u8 issue_reset = 0;
 	int rc;
 	void *request;
-	u16 wait_state_count;
 
 	dinitprintk(ioc, ioc_info(ioc, "%s\n", __func__));
 
@@ -5323,20 +5343,9 @@ mpt3sas_base_scsi_enclosure_processor(struct MPT3SAS_ADAPTER *ioc,
 		goto out;
 	}
 
-	wait_state_count = 0;
-	ioc_state = mpt3sas_base_get_iocstate(ioc, 1);
-	while (ioc_state != MPI2_IOC_STATE_OPERATIONAL) {
-		if (wait_state_count++ == 10) {
-			ioc_err(ioc, "%s: failed due to ioc not operational\n",
-				__func__);
-			rc = -EFAULT;
-			goto out;
-		}
-		ssleep(1);
-		ioc_state = mpt3sas_base_get_iocstate(ioc, 1);
-		ioc_info(ioc, "%s: waiting for operational state(count=%d)\n",
-			 __func__, wait_state_count);
-	}
+	rc = mpt3sas_wait_for_ioc_to_operational(ioc, IOC_OPERATIONAL_WAIT_COUNT);
+	if (rc)
+		goto out;
 
 	smid = mpt3sas_base_get_smid(ioc, ioc->base_cb_idx);
 	if (!smid) {
diff --git a/drivers/scsi/mpt3sas/mpt3sas_base.h b/drivers/scsi/mpt3sas/mpt3sas_base.h
index 8f1d6b0..c860ed2 100644
--- a/drivers/scsi/mpt3sas/mpt3sas_base.h
+++ b/drivers/scsi/mpt3sas/mpt3sas_base.h
@@ -139,6 +139,8 @@
 #define DEFAULT_NUM_FWCHAIN_ELEMTS	8
 
 #define FW_IMG_HDR_READ_TIMEOUT	15
+
+#define IOC_OPERATIONAL_WAIT_COUNT	10
 /*
  * NVMe defines
  */
@@ -1487,6 +1489,8 @@ mpt3sas_wait_for_commands_to_complete(struct MPT3SAS_ADAPTER *ioc);
 
 u8 mpt3sas_base_check_cmd_timeout(struct MPT3SAS_ADAPTER *ioc,
 	u8 status, void *mpi_request, int sz);
+int mpt3sas_wait_for_ioc_to_operational(struct MPT3SAS_ADAPTER *ioc,
+	int wait_count);
 
 /* scsih shared API */
 struct scsi_cmnd *mpt3sas_scsih_scsi_lookup_get(struct MPT3SAS_ADAPTER *ioc,
diff --git a/drivers/scsi/mpt3sas/mpt3sas_config.c b/drivers/scsi/mpt3sas/mpt3sas_config.c
index 0220944..88062d1 100644
--- a/drivers/scsi/mpt3sas/mpt3sas_config.c
+++ b/drivers/scsi/mpt3sas/mpt3sas_config.c
@@ -300,11 +300,9 @@ _config_request(struct MPT3SAS_ADAPTER *ioc, Mpi2ConfigRequest_t
 	void *config_page, u16 config_page_sz)
 {
 	u16 smid;
-	u32 ioc_state;
 	Mpi2ConfigRequest_t *config_request;
 	int r;
 	u8 retry_count, issue_host_reset = 0;
-	u16 wait_state_count;
 	struct config_request mem;
 	u32 ioc_status = UINT_MAX;
 
@@ -361,23 +359,11 @@ _config_request(struct MPT3SAS_ADAPTER *ioc, Mpi2ConfigRequest_t
 		ioc_info(ioc, "%s: attempting retry (%d)\n",
 			 __func__, retry_count);
 	}
-	wait_state_count = 0;
-	ioc_state = mpt3sas_base_get_iocstate(ioc, 1);
-	while (ioc_state != MPI2_IOC_STATE_OPERATIONAL) {
-		if (wait_state_count++ == MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT) {
-			ioc_err(ioc, "%s: failed due to ioc not operational\n",
-				__func__);
-			ioc->config_cmds.status = MPT3_CMD_NOT_USED;
-			r = -EFAULT;
-			goto free_mem;
-		}
-		ssleep(1);
-		ioc_state = mpt3sas_base_get_iocstate(ioc, 1);
-		ioc_info(ioc, "%s: waiting for operational state(count=%d)\n",
-			 __func__, wait_state_count);
-	}
-	if (wait_state_count)
-		ioc_info(ioc, "%s: ioc is operational\n", __func__);
+
+	r = mpt3sas_wait_for_ioc_to_operational(ioc,
+				MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT);
+	if (r)
+		goto free_mem;
 
 	smid = mpt3sas_base_get_smid(ioc, ioc->config_cb_idx);
 	if (!smid) {
diff --git a/drivers/scsi/mpt3sas/mpt3sas_ctl.c b/drivers/scsi/mpt3sas/mpt3sas_ctl.c
index 0f6305c..83fdf11 100644
--- a/drivers/scsi/mpt3sas/mpt3sas_ctl.c
+++ b/drivers/scsi/mpt3sas/mpt3sas_ctl.c
@@ -641,7 +641,6 @@ _ctl_do_mpt_command(struct MPT3SAS_ADAPTER *ioc, struct mpt3_ioctl_command karg,
 	MPI2DefaultReply_t *mpi_reply;
 	Mpi26NVMeEncapsulatedRequest_t *nvme_encap_request = NULL;
 	struct _pcie_device *pcie_device = NULL;
-	u32 ioc_state;
 	u16 smid;
 	u8 timeout;
 	u8 issue_reset;
@@ -654,7 +653,6 @@ _ctl_do_mpt_command(struct MPT3SAS_ADAPTER *ioc, struct mpt3_ioctl_command karg,
 	dma_addr_t data_in_dma = 0;
 	size_t data_in_sz = 0;
 	long ret;
-	u16 wait_state_count;
 	u16 device_handle = MPT3SAS_INVALID_DEVICE_HANDLE;
 	u8 tr_method = MPI26_SCSITASKMGMT_MSGFLAGS_PROTOCOL_LVL_RST_PCIE;
 
@@ -666,22 +664,9 @@ _ctl_do_mpt_command(struct MPT3SAS_ADAPTER *ioc, struct mpt3_ioctl_command karg,
 		goto out;
 	}
 
-	wait_state_count = 0;
-	ioc_state = mpt3sas_base_get_iocstate(ioc, 1);
-	while (ioc_state != MPI2_IOC_STATE_OPERATIONAL) {
-		if (wait_state_count++ == 10) {
-			ioc_err(ioc, "%s: failed due to ioc not operational\n",
-				__func__);
-			ret = -EFAULT;
-			goto out;
-		}
-		ssleep(1);
-		ioc_state = mpt3sas_base_get_iocstate(ioc, 1);
-		ioc_info(ioc, "%s: waiting for operational state(count=%d)\n",
-			 __func__, wait_state_count);
-	}
-	if (wait_state_count)
-		ioc_info(ioc, "%s: ioc is operational\n", __func__);
+	ret = mpt3sas_wait_for_ioc_to_operational(ioc, IOC_OPERATIONAL_WAIT_COUNT);
+	if (ret)
+		goto out;
 
 	mpi_request = kzalloc(ioc->request_sz, GFP_KERNEL);
 	if (!mpi_request) {
diff --git a/drivers/scsi/mpt3sas/mpt3sas_transport.c b/drivers/scsi/mpt3sas/mpt3sas_transport.c
index 031b420..bc1e67b 100644
--- a/drivers/scsi/mpt3sas/mpt3sas_transport.c
+++ b/drivers/scsi/mpt3sas/mpt3sas_transport.c
@@ -296,7 +296,6 @@ _transport_expander_report_manufacture(struct MPT3SAS_ADAPTER *ioc,
 	struct rep_manu_request *manufacture_request;
 	int rc;
 	u16 smid;
-	u32 ioc_state;
 	void *psge;
 	u8 issue_reset = 0;
 	void *data_out = NULL;
@@ -304,7 +303,6 @@ _transport_expander_report_manufacture(struct MPT3SAS_ADAPTER *ioc,
 	dma_addr_t data_in_dma;
 	size_t data_in_sz;
 	size_t data_out_sz;
-	u16 wait_state_count;
 
 	if (ioc->shost_recovery || ioc->pci_error_recovery) {
 		ioc_info(ioc, "%s: host reset in progress!\n", __func__);
@@ -320,22 +318,9 @@ _transport_expander_report_manufacture(struct MPT3SAS_ADAPTER *ioc,
 	}
 	ioc->transport_cmds.status = MPT3_CMD_PENDING;
 
-	wait_state_count = 0;
-	ioc_state = mpt3sas_base_get_iocstate(ioc, 1);
-	while (ioc_state != MPI2_IOC_STATE_OPERATIONAL) {
-		if (wait_state_count++ == 10) {
-			ioc_err(ioc, "%s: failed due to ioc not operational\n",
-				__func__);
-			rc = -EFAULT;
-			goto out;
-		}
-		ssleep(1);
-		ioc_state = mpt3sas_base_get_iocstate(ioc, 1);
-		ioc_info(ioc, "%s: waiting for operational state(count=%d)\n",
-			 __func__, wait_state_count);
-	}
-	if (wait_state_count)
-		ioc_info(ioc, "%s: ioc is operational\n", __func__);
+	rc = mpt3sas_wait_for_ioc_to_operational(ioc, IOC_OPERATIONAL_WAIT_COUNT);
+	if (rc)
+		goto out;
 
 	smid = mpt3sas_base_get_smid(ioc, ioc->transport_cb_idx);
 	if (!smid) {
@@ -1077,13 +1062,11 @@ _transport_get_expander_phy_error_log(struct MPT3SAS_ADAPTER *ioc,
 	struct phy_error_log_reply *phy_error_log_reply;
 	int rc;
 	u16 smid;
-	u32 ioc_state;
 	void *psge;
 	u8 issue_reset = 0;
 	void *data_out = NULL;
 	dma_addr_t data_out_dma;
 	u32 sz;
-	u16 wait_state_count;
 
 	if (ioc->shost_recovery || ioc->pci_error_recovery) {
 		ioc_info(ioc, "%s: host reset in progress!\n", __func__);
@@ -1099,22 +1082,9 @@ _transport_get_expander_phy_error_log(struct MPT3SAS_ADAPTER *ioc,
 	}
 	ioc->transport_cmds.status = MPT3_CMD_PENDING;
 
-	wait_state_count = 0;
-	ioc_state = mpt3sas_base_get_iocstate(ioc, 1);
-	while (ioc_state != MPI2_IOC_STATE_OPERATIONAL) {
-		if (wait_state_count++ == 10) {
-			ioc_err(ioc, "%s: failed due to ioc not operational\n",
-				__func__);
-			rc = -EFAULT;
-			goto out;
-		}
-		ssleep(1);
-		ioc_state = mpt3sas_base_get_iocstate(ioc, 1);
-		ioc_info(ioc, "%s: waiting for operational state(count=%d)\n",
-			 __func__, wait_state_count);
-	}
-	if (wait_state_count)
-		ioc_info(ioc, "%s: ioc is operational\n", __func__);
+	rc = mpt3sas_wait_for_ioc_to_operational(ioc, IOC_OPERATIONAL_WAIT_COUNT);
+	if (rc)
+		goto out;
 
 	smid = mpt3sas_base_get_smid(ioc, ioc->transport_cb_idx);
 	if (!smid) {
@@ -1381,13 +1351,11 @@ _transport_expander_phy_control(struct MPT3SAS_ADAPTER *ioc,
 	struct phy_control_reply *phy_control_reply;
 	int rc;
 	u16 smid;
-	u32 ioc_state;
 	void *psge;
 	u8 issue_reset = 0;
 	void *data_out = NULL;
 	dma_addr_t data_out_dma;
 	u32 sz;
-	u16 wait_state_count;
 
 	if (ioc->shost_recovery || ioc->pci_error_recovery) {
 		ioc_info(ioc, "%s: host reset in progress!\n", __func__);
@@ -1403,22 +1371,9 @@ _transport_expander_phy_control(struct MPT3SAS_ADAPTER *ioc,
 	}
 	ioc->transport_cmds.status = MPT3_CMD_PENDING;
 
-	wait_state_count = 0;
-	ioc_state = mpt3sas_base_get_iocstate(ioc, 1);
-	while (ioc_state != MPI2_IOC_STATE_OPERATIONAL) {
-		if (wait_state_count++ == 10) {
-			ioc_err(ioc, "%s: failed due to ioc not operational\n",
-				__func__);
-			rc = -EFAULT;
-			goto out;
-		}
-		ssleep(1);
-		ioc_state = mpt3sas_base_get_iocstate(ioc, 1);
-		ioc_info(ioc, "%s: waiting for operational state(count=%d)\n",
-			 __func__, wait_state_count);
-	}
-	if (wait_state_count)
-		ioc_info(ioc, "%s: ioc is operational\n", __func__);
+	rc = mpt3sas_wait_for_ioc_to_operational(ioc, IOC_OPERATIONAL_WAIT_COUNT);
+	if (rc)
+		goto out;
 
 	smid = mpt3sas_base_get_smid(ioc, ioc->transport_cb_idx);
 	if (!smid) {
-- 
1.8.3.1

[v6 2/4] mpt3sas: Fix Sync cache command failure during driver unload

[Suganath Prabu]

This is to fix Sync cache and start stop command
 failures with DID_NO_CONNECT during driver unload.

1) Release drives first from SML, then remove internally
in driver.
2) And allow sync cache and Start stop commands to firmware,
even when remove_host flag is set

Signed-off-by: Suganath Prabu <suganath-prabu.subramani@broadcom.com>
---
 drivers/scsi/mpt3sas/mpt3sas_scsih.c     | 38 ++++++++++++++++++++++++++++++--
 drivers/scsi/mpt3sas/mpt3sas_transport.c |  7 ++++--
 2 files changed, 41 insertions(+), 4 deletions(-)

diff --git a/drivers/scsi/mpt3sas/mpt3sas_scsih.c b/drivers/scsi/mpt3sas/mpt3sas_scsih.c
index 4d73b5e..df56cbe 100644
--- a/drivers/scsi/mpt3sas/mpt3sas_scsih.c
+++ b/drivers/scsi/mpt3sas/mpt3sas_scsih.c
@@ -3748,6 +3748,40 @@ _scsih_tm_tr_complete(struct MPT3SAS_ADAPTER *ioc, u16 smid, u8 msix_index,
 	return _scsih_check_for_pending_tm(ioc, smid);
 }
 
+/** _scsih_allow_scmd_to_device - check whether scmd needs to
+ *				 issue to IOC or not.
+ * @ioc: per adapter object
+ * @scmd: pointer to scsi command object
+ *
+ * Returns true if scmd can be issued to IOC otherwise returns false.
+ */
+inline bool _scsih_allow_scmd_to_device(struct MPT3SAS_ADAPTER *ioc,
+	struct scsi_cmnd *scmd)
+{
+
+	if (ioc->pci_error_recovery)
+		return false;
+
+	if (ioc->hba_mpi_version_belonged == MPI2_VERSION) {
+		if (ioc->remove_host)
+			return false;
+
+		return true;
+	}
+
+	if (ioc->remove_host) {
+
+		switch (scmd->cmnd[0]) {
+		case SYNCHRONIZE_CACHE:
+		case START_STOP:
+			return true;
+		default:
+			return false;
+		}
+	}
+
+	return true;
+}
 
 /**
  * _scsih_sas_control_complete - completion routine
@@ -4571,7 +4605,7 @@ scsih_qcmd(struct Scsi_Host *shost, struct scsi_cmnd *scmd)
 		return 0;
 	}
 
-	if (ioc->pci_error_recovery || ioc->remove_host) {
+	if (!(_scsih_allow_scmd_to_device(ioc, scmd))) {
 		scmd->result = DID_NO_CONNECT << 16;
 		scmd->scsi_done(scmd);
 		return 0;
@@ -9641,6 +9675,7 @@ static void scsih_remove(struct pci_dev *pdev)
 
 	/* release all the volumes */
 	_scsih_ir_shutdown(ioc);
+	sas_remove_host(shost);
 	list_for_each_entry_safe(raid_device, next, &ioc->raid_device_list,
 	    list) {
 		if (raid_device->starget) {
@@ -9682,7 +9717,6 @@ static void scsih_remove(struct pci_dev *pdev)
 		ioc->sas_hba.num_phys = 0;
 	}
 
-	sas_remove_host(shost);
 	mpt3sas_base_detach(ioc);
 	spin_lock(&gioc_lock);
 	list_del(&ioc->list);
diff --git a/drivers/scsi/mpt3sas/mpt3sas_transport.c b/drivers/scsi/mpt3sas/mpt3sas_transport.c
index bc1e67b..7d722b9 100644
--- a/drivers/scsi/mpt3sas/mpt3sas_transport.c
+++ b/drivers/scsi/mpt3sas/mpt3sas_transport.c
@@ -807,10 +807,13 @@ mpt3sas_transport_port_remove(struct MPT3SAS_ADAPTER *ioc, u64 sas_address,
 			    mpt3sas_port->remote_identify.sas_address,
 			    mpt3sas_phy->phy_id);
 		mpt3sas_phy->phy_belongs_to_port = 0;
-		sas_port_delete_phy(mpt3sas_port->port, mpt3sas_phy->phy);
+		if (!ioc->remove_host)
+			sas_port_delete_phy(mpt3sas_port->port,
+						mpt3sas_phy->phy);
 		list_del(&mpt3sas_phy->port_siblings);
 	}
-	sas_port_delete(mpt3sas_port->port);
+	if (!ioc->remove_host)
+		sas_port_delete(mpt3sas_port->port);
 	kfree(mpt3sas_port);
 }
 
-- 
1.8.3.1

[v6 3/4] mpt3sas:Fix driver modifying persistent data.

[Suganath Prabu]

* If EEDPTagMode field in manufacturing page11 is set,
unset it. This is needed to fix a hardware bug
in SAS3/SAS2 cards, So, skipping EEDPTagMode changes
in Manufacturing page11 for SAS35 controllers.

* Fix driver modifying NVRAM/persistent data in
Manufacturing page11 along with current copy. Driver should
change only current copy of Manufacturing page11.

Signed-off-by: Suganath Prabu <suganath-prabu.subramani@broadcom.com>
---
 drivers/scsi/mpt3sas/mpt3sas_base.c   | 2 +-
 drivers/scsi/mpt3sas/mpt3sas_config.c | 4 ----
 2 files changed, 1 insertion(+), 5 deletions(-)

diff --git a/drivers/scsi/mpt3sas/mpt3sas_base.c b/drivers/scsi/mpt3sas/mpt3sas_base.c
index 243bf32..2237681 100644
--- a/drivers/scsi/mpt3sas/mpt3sas_base.c
+++ b/drivers/scsi/mpt3sas/mpt3sas_base.c
@@ -4062,7 +4062,7 @@ _base_static_config_pages(struct MPT3SAS_ADAPTER *ioc)
 	 * flag unset in NVDATA.
 	 */
 	mpt3sas_config_get_manufacturing_pg11(ioc, &mpi_reply, &ioc->manu_pg11);
-	if (ioc->manu_pg11.EEDPTagMode == 0) {
+	if (!ioc->is_gen35_ioc && ioc->manu_pg11.EEDPTagMode == 0) {
 		pr_err("%s: overriding NVDATA EEDPTagMode setting\n",
 		    ioc->name);
 		ioc->manu_pg11.EEDPTagMode &= ~0x3;
diff --git a/drivers/scsi/mpt3sas/mpt3sas_config.c b/drivers/scsi/mpt3sas/mpt3sas_config.c
index 88062d1..fe3da1c 100644
--- a/drivers/scsi/mpt3sas/mpt3sas_config.c
+++ b/drivers/scsi/mpt3sas/mpt3sas_config.c
@@ -659,10 +659,6 @@ mpt3sas_config_set_manufacturing_pg11(struct MPT3SAS_ADAPTER *ioc,
 	r = _config_request(ioc, &mpi_request, mpi_reply,
 	    MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, config_page,
 	    sizeof(*config_page));
-	mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_WRITE_NVRAM;
-	r = _config_request(ioc, &mpi_request, mpi_reply,
-	    MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, config_page,
-	    sizeof(*config_page));
  out:
 	return r;
 }
-- 
1.8.3.1

[v6 4/4] mpt3sas: Bump driver version to 27.100.00.00.

[Suganath Prabu]

Modify driver version to 27.100.00.00
(which is equivalent to PH8 OOB driver)

Signed-off-by: Suganath Prabu <suganath-prabu.subramani@broadcom.com>
---
 drivers/scsi/mpt3sas/mpt3sas_base.h | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/scsi/mpt3sas/mpt3sas_base.h b/drivers/scsi/mpt3sas/mpt3sas_base.h
index c860ed2..7fdaf29 100644
--- a/drivers/scsi/mpt3sas/mpt3sas_base.h
+++ b/drivers/scsi/mpt3sas/mpt3sas_base.h
@@ -74,8 +74,8 @@
 #define MPT3SAS_DRIVER_NAME		"mpt3sas"
 #define MPT3SAS_AUTHOR "Avago Technologies <MPT-FusionLinux.pdl@avagotech.com>"
 #define MPT3SAS_DESCRIPTION	"LSI MPT Fusion SAS 3.0 Device Driver"
-#define MPT3SAS_DRIVER_VERSION		"26.100.00.00"
-#define MPT3SAS_MAJOR_VERSION		26
+#define MPT3SAS_DRIVER_VERSION		"27.100.00.00"
+#define MPT3SAS_MAJOR_VERSION		27
 #define MPT3SAS_MINOR_VERSION		100
 #define MPT3SAS_BUILD_VERSION		0
 #define MPT3SAS_RELEASE_VERSION	00
-- 
1.8.3.1

Re: [v6 0/4] mpt3sas: Hot-Plug Surprise removal support on IOC.

[Suganath Prabu Subramani]

Any update on this ?
In V6, I have posted has only defect fixes (Other than HBA Hot-Plug
Surprise remove support).

We are reworking and incorporating the suggestions from Bjorn.
And after covering tests, we ll post Hot-Plug Surprise removal patches.

Thanks,
Suganath Prabu
On Tue, Oct 23, 2018 at 3:51 PM Suganath Prabu
<suganath-prabu.subramani@broadcom.com> wrote:
>
> v6 Change set:
> Incorporated changes as suggested by Andy.
> In Patch 1 converted while loop to do while in
> function mpt3sas_wait_for_ioc_to_operational().
> And in patch 3 removed parentheses.
>
> V5 Change set:
> V5 post has only defect fixes.
> We are reworking and incorporating the suggestions from Bjorn.
> And after covering tests, we ll be post Hot-Plug Surprise
>  removal patches.
>
> V4 Change set:
> Reframe split strings in print statement, to avoid
>
> V3 Change Set:
> Simplified function "mpt3sas_base_pci_device_is_available" and
> made inline
>
> V2 changes:
> Replaced mpt3sas_base_pci_device_is_unplugged with
> pci_device_is_present.
>
> V1 changes:
> In Patch 0001 - unlock mutex, if active reset is in progress.
> Suganath Prabu (4):
>   mpt3sas: Separate out mpt3sas_wait_for_ioc_to_operational
>   mpt3sas: Fix Sync cache command failure during driver unload
>   mpt3sas:Fix driver modifying persistent data.
>   mpt3sas: Bump driver version to 27.100.00.00.
>
>  drivers/scsi/mpt3sas/mpt3sas_base.c      | 75 ++++++++++++++++++--------------
>  drivers/scsi/mpt3sas/mpt3sas_base.h      |  8 +++-
>  drivers/scsi/mpt3sas/mpt3sas_config.c    | 28 +++---------
>  drivers/scsi/mpt3sas/mpt3sas_ctl.c       | 21 ++-------
>  drivers/scsi/mpt3sas/mpt3sas_scsih.c     | 38 +++++++++++++++-
>  drivers/scsi/mpt3sas/mpt3sas_transport.c | 70 ++++++-----------------------
>  6 files changed, 106 insertions(+), 134 deletions(-)
>
> --
> 1.8.3.1
>

Re: [v6 0/4] mpt3sas: Hot-Plug Surprise removal support on IOC.

[Andy Shevchenko]

On Tue, Oct 30, 2018 at 8:41 AM Suganath Prabu Subramani
<suganath-prabu.subramani@broadcom.com> wrote:
>
> Any update on this ?
> In V6, I have posted has only defect fixes (Other than HBA Hot-Plug
> Surprise remove support).
>
> We are reworking and incorporating the suggestions from Bjorn.
> And after covering tests, we ll post Hot-Plug Surprise removal patches.
>

FWIW,
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>

P.S. We are in the middle of merge window, so, this week is a little
chance anyone will look at it.

> Thanks,
> Suganath Prabu
> On Tue, Oct 23, 2018 at 3:51 PM Suganath Prabu
> <suganath-prabu.subramani@broadcom.com> wrote:
> >
> > v6 Change set:
> > Incorporated changes as suggested by Andy.
> > In Patch 1 converted while loop to do while in
> > function mpt3sas_wait_for_ioc_to_operational().
> > And in patch 3 removed parentheses.
> >
> > V5 Change set:
> > V5 post has only defect fixes.
> > We are reworking and incorporating the suggestions from Bjorn.
> > And after covering tests, we ll be post Hot-Plug Surprise
> >  removal patches.
> >
> > V4 Change set:
> > Reframe split strings in print statement, to avoid
> >
> > V3 Change Set:
> > Simplified function "mpt3sas_base_pci_device_is_available" and
> > made inline
> >
> > V2 changes:
> > Replaced mpt3sas_base_pci_device_is_unplugged with
> > pci_device_is_present.
> >
> > V1 changes:
> > In Patch 0001 - unlock mutex, if active reset is in progress.
> > Suganath Prabu (4):
> >   mpt3sas: Separate out mpt3sas_wait_for_ioc_to_operational
> >   mpt3sas: Fix Sync cache command failure during driver unload
> >   mpt3sas:Fix driver modifying persistent data.
> >   mpt3sas: Bump driver version to 27.100.00.00.
> >
> >  drivers/scsi/mpt3sas/mpt3sas_base.c      | 75 ++++++++++++++++++--------------
> >  drivers/scsi/mpt3sas/mpt3sas_base.h      |  8 +++-
> >  drivers/scsi/mpt3sas/mpt3sas_config.c    | 28 +++---------
> >  drivers/scsi/mpt3sas/mpt3sas_ctl.c       | 21 ++-------
> >  drivers/scsi/mpt3sas/mpt3sas_scsih.c     | 38 +++++++++++++++-
> >  drivers/scsi/mpt3sas/mpt3sas_transport.c | 70 ++++++-----------------------
> >  6 files changed, 106 insertions(+), 134 deletions(-)
> >
> > --
> > 1.8.3.1
> >



-- 
With Best Regards,
Andy Shevchenko

Re: [v6 1/4] mpt3sas: Separate out mpt3sas_wait_for_ioc_to_operational

[Bjorn Helgaas]

On Tue, Oct 23, 2018 at 03:51:18PM +0530, Suganath Prabu wrote:
> No functional changes. This section of code
>  "wait for IOC to be operational" is used in many places
>  across the driver, and hence moved this code in to
>  a function "mpt3sas_wait_for_ioc_to_operational()"
> 
> Signed-off-by: Suganath Prabu <suganath-prabu.subramani@broadcom.com>

I'm not really a reviewer of mpt3sas, but since I commented earlier,
I took a quick look at this.  Minor comments:

  - Remove leading spaces from changelog and reformat to use the whole
    width, e.g.,

      No functional changes. This section of code "wait for IOC to be
      operational" is used in many places across the driver.  Factor
      this code out into a new mpt3sas_wait_for_ioc_to_operational().

  - "mpt3sas_wait_for_ioc_to_operational" isn't really grammatical in
    English; maybe "mpt3sas_wait_for_ioc" would be better?

  - It would be slightly easier to review this if it were split into three
    patches: (1) add and use the IOC_OPERATIONAL_WAIT_COUNT #define, (2)
    factor out mpt3sas_wait_for_ioc() using the exact same code structure
    (the while loop), and (3) convert mpt3sas_wait_for_ioc() to use the do
    loop instead of the while.  The idea is that each individual patch is
    simpler and more obvious because it only contains a single logical
    change.

Reviewed-by: Bjorn Helgaas <bhelgaas@google.com>

Re: [v6 2/4] mpt3sas: Fix Sync cache command failure during driver unload

[Bjorn Helgaas]

On Tue, Oct 23, 2018 at 03:51:19PM +0530, Suganath Prabu wrote:
> This is to fix Sync cache and start stop command
>  failures with DID_NO_CONNECT during driver unload.
> 
> 1) Release drives first from SML, then remove internally
> in driver.
> 2) And allow sync cache and Start stop commands to firmware,
> even when remove_host flag is set

This looks like it should be two or maybe even three patches: (1) call
sas_remove_host() before releasing volumes and ports, (2) skipping
sas_port_delete_phy() and sas_port_delete() when ioc->remove_host (I'm not
sure if this is logically part of the sas_remove_host() change), and (3)
add _scsih_allow_scmd_to_device() -- this is purely mpt3sas-specific thing
independent of the SCSI midlayer.

Bjorn

Re: [v6 3/4] mpt3sas:Fix driver modifying persistent data.

[Bjorn Helgaas]

On Tue, Oct 23, 2018 at 03:51:20PM +0530, Suganath Prabu wrote:
> * If EEDPTagMode field in manufacturing page11 is set,
> unset it. This is needed to fix a hardware bug
> in SAS3/SAS2 cards, So, skipping EEDPTagMode changes
> in Manufacturing page11 for SAS35 controllers.
> 
> * Fix driver modifying NVRAM/persistent data in
> Manufacturing page11 along with current copy. Driver should
> change only current copy of Manufacturing page11.

These *look* like two separate changes that should be in separate patches.

Also, fix your subject line so "git log --oneline drivers/scsi/mpt3sas"
looks nice  This subject line is missing a space in "mpt3sas:Fix"

Bjorn