[PATCH v4 0/3] Enable ath10k wcn3990 wifi driver support on sdm845

[PATCH v4 0/3] Enable ath10k wcn3990 wifi driver support on sdm845

[Govind Singh]

This series enables ath10k wifi driver support for WCN3990 target
on sdm845 SOC. This series also updates the missing dt binding documentation
and adds optional iommu property.

Changes since v3:
    Moved interrupt/reg/reg-name to required property.
    Removed unused clocks.
    Corrected interrupt no's.

Changes since v2:
    dropped [v2,4/4] dts: arm64/sdm845: Enable iommu for WCN3990 wifi module
    device node patch from the series as dependent patch is not yet merged.
    Enabled status flag from sdm845-mtp.dts.

Changes since v1:
    Listed no of interrupts/clocks for each set of compatible.
    Added missing 'wifi' label to sdm845.dtsi.

Govind Singh (3):
  dt: bindings: add missing dt properties for WCN3990 wifi node
  dts: arm64/sdm845: Add WCN3990 WLAN module device node
  dt: bindings: add bindings for wifi iommu node

 .../bindings/net/wireless/qcom,ath10k.txt          | 62 ++++++++++++++--------
 arch/arm64/boot/dts/qcom/sdm845-mtp.dts            |  8 +++
 arch/arm64/boot/dts/qcom/sdm845.dtsi               | 26 +++++++++
 3 files changed, 74 insertions(+), 22 deletions(-)

-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project

[PATCH v4 1/3] dt: bindings: add missing dt properties for WCN3990 wifi node

[Govind Singh]

Add missing optional properties in WCN3990 wifi node.

Signed-off-by: Govind Singh <govinds@codeaurora.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Brian Norris <briannorris@chromium.org>
Tested-by: Brian Norris <briannorris@chromium.org>
---
 .../bindings/net/wireless/qcom,ath10k.txt          | 57 +++++++++++++---------
 1 file changed, 35 insertions(+), 22 deletions(-)

diff --git a/Documentation/devicetree/bindings/net/wireless/qcom,ath10k.txt b/Documentation/devicetree/bindings/net/wireless/qcom,ath10k.txt
index 7fd4e8c..55d255c 100644
--- a/Documentation/devicetree/bindings/net/wireless/qcom,ath10k.txt
+++ b/Documentation/devicetree/bindings/net/wireless/qcom,ath10k.txt
@@ -21,10 +21,22 @@ can be provided per device.
 
 SNOC based devices (i.e. wcn3990) uses compatible string "qcom,wcn3990-wifi".
 
-Optional properties:
 - reg: Address and length of the register set for the device.
 - reg-names: Must include the list of following reg names,
 	     "membase"
+- interrupts: reference to the list of 17 interrupt numbers for "qcom,ipq4019-wifi"
+	      compatible target.
+	      reference to the list of 12 interrupt numbers for "qcom,wcn3990-wifi"
+	      compatible target.
+	      Must contain interrupt-names property per entry for
+	      "qcom,ath10k", "qcom,ipq4019-wifi" compatible targets.
+
+- interrupt-names: Must include the entries for MSI interrupt
+		   names ("msi0" to "msi15") and legacy interrupt
+		   name ("legacy") for "qcom,ath10k", "qcom,ipq4019-wifi"
+		   compatible targets.
+
+Optional properties:
 - resets: Must contain an entry for each entry in reset-names.
           See ../reset/reseti.txt for details.
 - reset-names: Must include the list of following reset names,
@@ -37,12 +49,9 @@ Optional properties:
 - clocks: List of clock specifiers, must contain an entry for each required
           entry in clock-names.
 - clock-names: Should contain the clock names "wifi_wcss_cmd", "wifi_wcss_ref",
-               "wifi_wcss_rtc".
-- interrupts: List of interrupt lines. Must contain an entry
-	      for each entry in the interrupt-names property.
-- interrupt-names: Must include the entries for MSI interrupt
-		   names ("msi0" to "msi15") and legacy interrupt
-		   name ("legacy"),
+	       "wifi_wcss_rtc" for "qcom,ipq4019-wifi" compatible target and
+	       "cxo_ref_clk_pin" for "qcom,wcn3990-wifi"
+	       compatible target.
 - qcom,msi_addr: MSI interrupt address.
 - qcom,msi_base: Base value to add before writing MSI data into
 		MSI address register.
@@ -55,7 +64,8 @@ Optional properties:
 - qcom,ath10k-pre-calibration-data : pre calibration data as an array,
 				     the length can vary between hw versions.
 - <supply-name>-supply: handle to the regulator device tree node
-			   optional "supply-name" is "vdd-0.8-cx-mx".
+			   optional "supply-name" are "vdd-0.8-cx-mx",
+			   "vdd-1.8-xo", "vdd-1.3-rfa" and "vdd-3.3-ch0".
 
 Example (to supply the calibration data alone):
 
@@ -133,20 +143,23 @@ wifi@18000000 {
 		compatible = "qcom,wcn3990-wifi";
 		reg = <0x18800000 0x800000>;
 		reg-names = "membase";
-		clocks = <&clock_gcc clk_aggre2_noc_clk>;
-		clock-names = "smmu_aggre2_noc_clk"
+		clocks = <&clock_gcc clk_rf_clk2_pin>;
+		clock-names = "cxo_ref_clk_pin";
 		interrupts =
-			   <0 130 0 /* CE0 */ >,
-			   <0 131 0 /* CE1 */ >,
-			   <0 132 0 /* CE2 */ >,
-			   <0 133 0 /* CE3 */ >,
-			   <0 134 0 /* CE4 */ >,
-			   <0 135 0 /* CE5 */ >,
-			   <0 136 0 /* CE6 */ >,
-			   <0 137 0 /* CE7 */ >,
-			   <0 138 0 /* CE8 */ >,
-			   <0 139 0 /* CE9 */ >,
-			   <0 140 0 /* CE10 */ >,
-			   <0 141 0 /* CE11 */ >;
+			<GIC_SPI 414 IRQ_TYPE_LEVEL_HIGH>,
+			<GIC_SPI 415 IRQ_TYPE_LEVEL_HIGH>,
+			<GIC_SPI 416 IRQ_TYPE_LEVEL_HIGH>,
+			<GIC_SPI 417 IRQ_TYPE_LEVEL_HIGH>,
+			<GIC_SPI 418 IRQ_TYPE_LEVEL_HIGH>,
+			<GIC_SPI 419 IRQ_TYPE_LEVEL_HIGH>,
+			<GIC_SPI 420 IRQ_TYPE_LEVEL_HIGH>,
+			<GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH>,
+			<GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH>,
+			<GIC_SPI 423 IRQ_TYPE_LEVEL_HIGH>,
+			<GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH>,
+			<GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH>;
 		vdd-0.8-cx-mx-supply = <&pm8998_l5>;
+		vdd-1.8-xo-supply = <&vreg_l7a_1p8>;
+		vdd-1.3-rfa-supply = <&vreg_l17a_1p3>;
+		vdd-3.3-ch0-supply = <&vreg_l25a_3p3>;
 };
-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project

Re: [PATCH v4 1/3] dt: bindings: add missing dt properties for WCN3990 wifi node

[Kalle Valo]

Govind Singh <govinds@codeaurora.org> wrote:

> Add missing optional properties in WCN3990 wifi node.
> 
> Signed-off-by: Govind Singh <govinds@codeaurora.org>
> Reviewed-by: Rob Herring <robh@kernel.org>
> Reviewed-by: Brian Norris <briannorris@chromium.org>
> Tested-by: Brian Norris <briannorris@chromium.org>
> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>

2 patches applied to ath-next branch of ath.git, thanks.

5fac78aac91d dt: bindings: ath10k: add missing dt properties for WCN3990 wifi node
a3542d0c73ce dt: bindings: ath10k: add bindings for wifi iommu node

-- 
https://patchwork.kernel.org/patch/10668237/

https://wireless.wiki.kernel.org/en/developers/documentation/submittingpatches

[PATCH v4 2/3] dts: arm64/sdm845: Add WCN3990 WLAN module device node

[Govind Singh]

Add device node for the ath10k SNOC platform driver probe
and add resources required for WCN3990 on SDM845 soc.

Signed-off-by: Govind Singh <govinds@codeaurora.org>
Reviewed-by: Brian Norris <briannorris@chromium.org>
Tested-by: Brian Norris <briannorris@chromium.org>
---
 arch/arm64/boot/dts/qcom/sdm845-mtp.dts |  8 ++++++++
 arch/arm64/boot/dts/qcom/sdm845.dtsi    | 26 ++++++++++++++++++++++++++
 2 files changed, 34 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/sdm845-mtp.dts b/arch/arm64/boot/dts/qcom/sdm845-mtp.dts
index eedfaf8..c062c5c 100644
--- a/arch/arm64/boot/dts/qcom/sdm845-mtp.dts
+++ b/arch/arm64/boot/dts/qcom/sdm845-mtp.dts
@@ -440,3 +440,11 @@
 		bias-pull-up;
 	};
 };
+
+&wifi {
+	status = "okay";
+	vdd-0.8-cx-mx-supply = <&vreg_l5a_0p8>;
+	vdd-1.8-xo-supply = <&vreg_l7a_1p8>;
+	vdd-1.3-rfa-supply = <&vreg_l17a_1p3>;
+	vdd-3.3-ch0-supply = <&vreg_l25a_3p3>;
+};
diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi
index b72bdb0..324be5b 100644
--- a/arch/arm64/boot/dts/qcom/sdm845.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi
@@ -87,6 +87,11 @@
 			reg = <0 0x86200000 0 0x2d00000>;
 			no-map;
 		};
+
+		wlan_msa_mem: memory@96700000 {
+			reg = <0 0x96700000 0 0x100000>;
+			no-map;
+		};
 	};
 
 	cpus {
@@ -1403,5 +1408,26 @@
 				status = "disabled";
 			};
 		};
+
+		wifi: wifi@18800000 {
+			compatible = "qcom,wcn3990-wifi";
+			status = "disabled";
+			reg = <0x18800000 0x800000>;
+			reg-names = "membase";
+			memory-region = <&wlan_msa_mem>;
+			interrupts =
+				<GIC_SPI 414 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 415 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 416 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 417 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 418 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 419 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 420 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 423 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH>;
+		};
 	};
 };
-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project

Re: [PATCH v4 2/3] dts: arm64/sdm845: Add WCN3990 WLAN module device node

[Brian Norris]

Hi Govind,

On Mon, Nov 05, 2018 at 06:38:37PM +0530, Govind Singh wrote:
> Add device node for the ath10k SNOC platform driver probe
> and add resources required for WCN3990 on SDM845 soc.
> 
> Signed-off-by: Govind Singh <govinds@codeaurora.org>
> Reviewed-by: Brian Norris <briannorris@chromium.org>
> Tested-by: Brian Norris <briannorris@chromium.org>
> ---
>  arch/arm64/boot/dts/qcom/sdm845-mtp.dts |  8 ++++++++
>  arch/arm64/boot/dts/qcom/sdm845.dtsi    | 26 ++++++++++++++++++++++++++
>  2 files changed, 34 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/qcom/sdm845-mtp.dts b/arch/arm64/boot/dts/qcom/sdm845-mtp.dts
> index eedfaf8..c062c5c 100644
> --- a/arch/arm64/boot/dts/qcom/sdm845-mtp.dts
> +++ b/arch/arm64/boot/dts/qcom/sdm845-mtp.dts
> @@ -440,3 +440,11 @@
>  		bias-pull-up;
>  	};
>  };
> +
> +&wifi {
> +	status = "okay";
> +	vdd-0.8-cx-mx-supply = <&vreg_l5a_0p8>;
> +	vdd-1.8-xo-supply = <&vreg_l7a_1p8>;
> +	vdd-1.3-rfa-supply = <&vreg_l17a_1p3>;
> +	vdd-3.3-ch0-supply = <&vreg_l25a_3p3>;
> +};

This node should be above the PINCTRL section.

Brian

> diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi
> index b72bdb0..324be5b 100644
> --- a/arch/arm64/boot/dts/qcom/sdm845.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi
> @@ -87,6 +87,11 @@
>  			reg = <0 0x86200000 0 0x2d00000>;
>  			no-map;
>  		};
> +
> +		wlan_msa_mem: memory@96700000 {
> +			reg = <0 0x96700000 0 0x100000>;
> +			no-map;
> +		};
>  	};
>  
>  	cpus {
> @@ -1403,5 +1408,26 @@
>  				status = "disabled";
>  			};
>  		};
> +
> +		wifi: wifi@18800000 {
> +			compatible = "qcom,wcn3990-wifi";
> +			status = "disabled";
> +			reg = <0x18800000 0x800000>;
> +			reg-names = "membase";
> +			memory-region = <&wlan_msa_mem>;
> +			interrupts =
> +				<GIC_SPI 414 IRQ_TYPE_LEVEL_HIGH>,
> +				<GIC_SPI 415 IRQ_TYPE_LEVEL_HIGH>,
> +				<GIC_SPI 416 IRQ_TYPE_LEVEL_HIGH>,
> +				<GIC_SPI 417 IRQ_TYPE_LEVEL_HIGH>,
> +				<GIC_SPI 418 IRQ_TYPE_LEVEL_HIGH>,
> +				<GIC_SPI 419 IRQ_TYPE_LEVEL_HIGH>,
> +				<GIC_SPI 420 IRQ_TYPE_LEVEL_HIGH>,
> +				<GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH>,
> +				<GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH>,
> +				<GIC_SPI 423 IRQ_TYPE_LEVEL_HIGH>,
> +				<GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH>,
> +				<GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH>;
> +		};
>  	};
>  };
> -- 
> The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
> a Linux Foundation Collaborative Project
> 

[PATCH v4 3/3] dt: bindings: add bindings for wifi iommu node

[Govind Singh]

WCN3990 wifi module can optionally make use of the IOMMU.
Add binding documentation for phandle to the IOMMU and
the stream id of wifi iommu block.

Signed-off-by: Govind Singh <govinds@codeaurora.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Brian Norris <briannorris@chromium.org>
Tested-by: Brian Norris <briannorris@chromium.org>
---
 Documentation/devicetree/bindings/net/wireless/qcom,ath10k.txt | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/Documentation/devicetree/bindings/net/wireless/qcom,ath10k.txt b/Documentation/devicetree/bindings/net/wireless/qcom,ath10k.txt
index 55d255c..78fb56a 100644
--- a/Documentation/devicetree/bindings/net/wireless/qcom,ath10k.txt
+++ b/Documentation/devicetree/bindings/net/wireless/qcom,ath10k.txt
@@ -66,6 +66,10 @@ Optional properties:
 - <supply-name>-supply: handle to the regulator device tree node
 			   optional "supply-name" are "vdd-0.8-cx-mx",
 			   "vdd-1.8-xo", "vdd-1.3-rfa" and "vdd-3.3-ch0".
+- iommus:
+	Usage: optional
+	Value type: <prop-encoded-array>
+	Definition: A list of phandle and IOMMU specifier pairs.
 
 Example (to supply the calibration data alone):
 
@@ -162,4 +166,5 @@ wifi@18000000 {
 		vdd-1.8-xo-supply = <&vreg_l7a_1p8>;
 		vdd-1.3-rfa-supply = <&vreg_l17a_1p3>;
 		vdd-3.3-ch0-supply = <&vreg_l25a_3p3>;
+		iommus = <&apps_smmu 0x0040 0x1>;
 };
-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project

Re: [PATCH v4 0/3] Enable ath10k wcn3990 wifi driver support on sdm845

[Kalle Valo]

Govind Singh <govinds@codeaurora.org> writes:

> This series enables ath10k wifi driver support for WCN3990 target
> on sdm845 SOC. This series also updates the missing dt binding documentation
> and adds optional iommu property.
>
> Changes since v3:
>     Moved interrupt/reg/reg-name to required property.
>     Removed unused clocks.
>     Corrected interrupt no's.
>
> Changes since v2:
>     dropped [v2,4/4] dts: arm64/sdm845: Enable iommu for WCN3990 wifi module
>     device node patch from the series as dependent patch is not yet merged.
>     Enabled status flag from sdm845-mtp.dts.
>
> Changes since v1:
>     Listed no of interrupts/clocks for each set of compatible.
>     Added missing 'wifi' label to sdm845.dtsi.
>
> Govind Singh (3):
>   dt: bindings: add missing dt properties for WCN3990 wifi node
>   dts: arm64/sdm845: Add WCN3990 WLAN module device node
>   dt: bindings: add bindings for wifi iommu node
>
>  .../bindings/net/wireless/qcom,ath10k.txt          | 62 ++++++++++++++--------
>  arch/arm64/boot/dts/qcom/sdm845-mtp.dts            |  8 +++
>  arch/arm64/boot/dts/qcom/sdm845.dtsi               | 26 +++++++++
>  3 files changed, 74 insertions(+), 22 deletions(-)

Via which tree are these patches going? That's not clear for me.

-- 
Kalle Valo

Re: [PATCH v4 0/3] Enable ath10k wcn3990 wifi driver support on sdm845

[Govind Singh]

On 2018-11-16 18:59, Kalle Valo wrote:
> Govind Singh <govinds@codeaurora.org> writes:
> 
>> This series enables ath10k wifi driver support for WCN3990 target
>> on sdm845 SOC. This series also updates the missing dt binding 
>> documentation
>> and adds optional iommu property.
>> 
>> Changes since v3:
>>     Moved interrupt/reg/reg-name to required property.
>>     Removed unused clocks.
>>     Corrected interrupt no's.
>> 
>> Changes since v2:
>>     dropped [v2,4/4] dts: arm64/sdm845: Enable iommu for WCN3990 wifi 
>> module
>>     device node patch from the series as dependent patch is not yet 
>> merged.
>>     Enabled status flag from sdm845-mtp.dts.
>> 
>> Changes since v1:
>>     Listed no of interrupts/clocks for each set of compatible.
>>     Added missing 'wifi' label to sdm845.dtsi.
>> 
>> Govind Singh (3):
>>   dt: bindings: add missing dt properties for WCN3990 wifi node
>>   dts: arm64/sdm845: Add WCN3990 WLAN module device node
>>   dt: bindings: add bindings for wifi iommu node
>> 
>>  .../bindings/net/wireless/qcom,ath10k.txt          | 62 
>> ++++++++++++++--------
>>  arch/arm64/boot/dts/qcom/sdm845-mtp.dts            |  8 +++
>>  arch/arm64/boot/dts/qcom/sdm845.dtsi               | 26 +++++++++
>>  3 files changed, 74 insertions(+), 22 deletions(-)
> 
> Via which tree are these patches going? That's not clear for me.

I guess sdm845 dtsi change should be going to 
git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux.git.
I need to send v5 to address one comment from Brian.

BR,
Govind

Re: [PATCH v4 0/3] Enable ath10k wcn3990 wifi driver support on sdm845

[Kalle Valo]

Govind Singh <govinds@codeaurora.org> writes:

> On 2018-11-16 18:59, Kalle Valo wrote:
>> Govind Singh <govinds@codeaurora.org> writes:
>>
>>> This series enables ath10k wifi driver support for WCN3990 target
>>> on sdm845 SOC. This series also updates the missing dt binding
>>> documentation
>>> and adds optional iommu property.
>>>
>>> Changes since v3:
>>>     Moved interrupt/reg/reg-name to required property.
>>>     Removed unused clocks.
>>>     Corrected interrupt no's.
>>>
>>> Changes since v2:
>>>     dropped [v2,4/4] dts: arm64/sdm845: Enable iommu for WCN3990
>>> wifi module
>>>     device node patch from the series as dependent patch is not yet
>>> merged.
>>>     Enabled status flag from sdm845-mtp.dts.
>>>
>>> Changes since v1:
>>>     Listed no of interrupts/clocks for each set of compatible.
>>>     Added missing 'wifi' label to sdm845.dtsi.
>>>
>>> Govind Singh (3):
>>>   dt: bindings: add missing dt properties for WCN3990 wifi node
>>>   dts: arm64/sdm845: Add WCN3990 WLAN module device node
>>>   dt: bindings: add bindings for wifi iommu node
>>>
>>>  .../bindings/net/wireless/qcom,ath10k.txt          | 62
>>> ++++++++++++++--------
>>>  arch/arm64/boot/dts/qcom/sdm845-mtp.dts            |  8 +++
>>>  arch/arm64/boot/dts/qcom/sdm845.dtsi               | 26 +++++++++
>>>  3 files changed, 74 insertions(+), 22 deletions(-)
>>
>> Via which tree are these patches going? That's not clear for me.
>
> I guess sdm845 dtsi change should be going to
> git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux.git.
> I need to send v5 to address one comment from Brian.

Ok, I'll then drop these from my queue.

-- 
Kalle Valo

Re: [PATCH v4 0/3] Enable ath10k wcn3990 wifi driver support on sdm845

[Govind Singh]

Hi Kalle,

On 2018-11-17 16:39, Kalle Valo wrote:
> Govind Singh <govinds@codeaurora.org> writes:
> 
>> On 2018-11-16 18:59, Kalle Valo wrote:
>>> Govind Singh <govinds@codeaurora.org> writes:
>>> 
>>>> This series enables ath10k wifi driver support for WCN3990 target
>>>> on sdm845 SOC. This series also updates the missing dt binding
>>>> documentation
>>>> and adds optional iommu property.
>>>> 
>>>> Changes since v3:
>>>>     Moved interrupt/reg/reg-name to required property.
>>>>     Removed unused clocks.
>>>>     Corrected interrupt no's.
>>>> 
>>>> Changes since v2:
>>>>     dropped [v2,4/4] dts: arm64/sdm845: Enable iommu for WCN3990
>>>> wifi module
>>>>     device node patch from the series as dependent patch is not yet
>>>> merged.
>>>>     Enabled status flag from sdm845-mtp.dts.
>>>> 
>>>> Changes since v1:
>>>>     Listed no of interrupts/clocks for each set of compatible.
>>>>     Added missing 'wifi' label to sdm845.dtsi.
>>>> 
>>>> Govind Singh (3):
>>>>   dt: bindings: add missing dt properties for WCN3990 wifi node
>>>>   dts: arm64/sdm845: Add WCN3990 WLAN module device node
>>>>   dt: bindings: add bindings for wifi iommu node
>>>> 
>>>>  .../bindings/net/wireless/qcom,ath10k.txt          | 62
>>>> ++++++++++++++--------
>>>>  arch/arm64/boot/dts/qcom/sdm845-mtp.dts            |  8 +++
>>>>  arch/arm64/boot/dts/qcom/sdm845.dtsi               | 26 +++++++++
>>>>  3 files changed, 74 insertions(+), 22 deletions(-)
>>> 
>>> Via which tree are these patches going? That's not clear for me.
>> 
>> I guess sdm845 dtsi change should be going to
>> git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux.git.
>> I need to send v5 to address one comment from Brian.
> 
> Ok, I'll then drop these from my queue.

Can you pls apply below changes to ath10k tree, i will send sdm845 dtsi 
change as separate patch after rebase.
>>>>   dt: bindings: add missing dt properties for WCN3990 wifi node
>>>>   dt: bindings: add bindings for wifi iommu node

BR,
Govind

Re: [PATCH v4 0/3] Enable ath10k wcn3990 wifi driver support on sdm845

[Kalle Valo]

Govind Singh <govinds@codeaurora.org> writes:

> Hi Kalle,
>
> On 2018-11-17 16:39, Kalle Valo wrote:
>> Govind Singh <govinds@codeaurora.org> writes:
>>
>>> On 2018-11-16 18:59, Kalle Valo wrote:
>>>> Govind Singh <govinds@codeaurora.org> writes:
>>>>
>>>>> This series enables ath10k wifi driver support for WCN3990 target
>>>>> on sdm845 SOC. This series also updates the missing dt binding
>>>>> documentation
>>>>> and adds optional iommu property.
>>>>>
>>>>> Changes since v3:
>>>>>     Moved interrupt/reg/reg-name to required property.
>>>>>     Removed unused clocks.
>>>>>     Corrected interrupt no's.
>>>>>
>>>>> Changes since v2:
>>>>>     dropped [v2,4/4] dts: arm64/sdm845: Enable iommu for WCN3990
>>>>> wifi module
>>>>>     device node patch from the series as dependent patch is not yet
>>>>> merged.
>>>>>     Enabled status flag from sdm845-mtp.dts.
>>>>>
>>>>> Changes since v1:
>>>>>     Listed no of interrupts/clocks for each set of compatible.
>>>>>     Added missing 'wifi' label to sdm845.dtsi.
>>>>>
>>>>> Govind Singh (3):
>>>>>   dt: bindings: add missing dt properties for WCN3990 wifi node
>>>>>   dts: arm64/sdm845: Add WCN3990 WLAN module device node
>>>>>   dt: bindings: add bindings for wifi iommu node
>>>>>
>>>>>  .../bindings/net/wireless/qcom,ath10k.txt          | 62
>>>>> ++++++++++++++--------
>>>>>  arch/arm64/boot/dts/qcom/sdm845-mtp.dts            |  8 +++
>>>>>  arch/arm64/boot/dts/qcom/sdm845.dtsi               | 26 +++++++++
>>>>>  3 files changed, 74 insertions(+), 22 deletions(-)
>>>>
>>>> Via which tree are these patches going? That's not clear for me.
>>>
>>> I guess sdm845 dtsi change should be going to
>>> git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux.git.
>>> I need to send v5 to address one comment from Brian.
>>
>> Ok, I'll then drop these from my queue.
>
> Can you pls apply below changes to ath10k tree, i will send sdm845
> dtsi change as separate patch after rebase.
>
>>>>>   dt: bindings: add missing dt properties for WCN3990 wifi node
>>>>>   dt: bindings: add bindings for wifi iommu node

Ok, these two are back in my queue:

https://patchwork.kernel.org/patch/10668237/

https://patchwork.kernel.org/patch/10668245/

I'll just modify the titles to use ath10k prefix to make it more clear
these are for ath10k:

   dt: bindings: ath10k: .....

-- 
Kalle Valo

Re: [PATCH v4 0/3] Enable ath10k wcn3990 wifi driver support on sdm845

[Kalle Valo]

Kalle Valo <kvalo@codeaurora.org> writes:

> Govind Singh <govinds@codeaurora.org> writes:
>
>> Hi Kalle,
>>
>> On 2018-11-17 16:39, Kalle Valo wrote:
>>> Govind Singh <govinds@codeaurora.org> writes:
>>>
>>>> On 2018-11-16 18:59, Kalle Valo wrote:
>>>>>
>>>>> Via which tree are these patches going? That's not clear for me.
>>>>
>>>> I guess sdm845 dtsi change should be going to
>>>> git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux.git.
>>>> I need to send v5 to address one comment from Brian.
>>>
>>> Ok, I'll then drop these from my queue.
>>
>> Can you pls apply below changes to ath10k tree, i will send sdm845
>> dtsi change as separate patch after rebase.
>>
>>>>>>   dt: bindings: add missing dt properties for WCN3990 wifi node
>>>>>>   dt: bindings: add bindings for wifi iommu node
>
> Ok, these two are back in my queue:
>
> https://patchwork.kernel.org/patch/10668237/
>
> https://patchwork.kernel.org/patch/10668245/
>
> I'll just modify the titles to use ath10k prefix to make it more clear
> these are for ath10k:
>
>    dt: bindings: ath10k: .....

There were conflicts with this commit:

2b741a8aaa34 dt: bindings: add bindings for msa memory region

I fixed them in the pending branch, please double check carefully:

https://git.kernel.org/pub/scm/linux/kernel/git/kvalo/ath.git/commit/?h=pending&id=5bb88d4d49783c75ac083e4ea19b7527bc115857

https://git.kernel.org/pub/scm/linux/kernel/git/kvalo/ath.git/commit/?h=pending&id=a6d53e207670eacd72a74277658bac1ab346fabd

-- 
Kalle Valo

Re: [PATCH v4 0/3] Enable ath10k wcn3990 wifi driver support on sdm845

[Govind Singh]

Hi Kalle,

On 2018-12-20 18:48, Kalle Valo wrote:
> Kalle Valo <kvalo@codeaurora.org> writes:
> 
>> Govind Singh <govinds@codeaurora.org> writes:
>> 
>>> Hi Kalle,
>>> 
>>> On 2018-11-17 16:39, Kalle Valo wrote:
>>>> Govind Singh <govinds@codeaurora.org> writes:
>>>> 
>>>>> On 2018-11-16 18:59, Kalle Valo wrote:
>>>>>> 
>>>>>> Via which tree are these patches going? That's not clear for me.
>>>>> 
>>>>> I guess sdm845 dtsi change should be going to
>>>>> git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux.git.
>>>>> I need to send v5 to address one comment from Brian.
>>>> 
>>>> Ok, I'll then drop these from my queue.
>>> 
>>> Can you pls apply below changes to ath10k tree, i will send sdm845
>>> dtsi change as separate patch after rebase.
>>> 
>>>>>>>   dt: bindings: add missing dt properties for WCN3990 wifi node
>>>>>>>   dt: bindings: add bindings for wifi iommu node
>> 
>> Ok, these two are back in my queue:
>> 
>> https://patchwork.kernel.org/patch/10668237/
>> 
>> https://patchwork.kernel.org/patch/10668245/
>> 
>> I'll just modify the titles to use ath10k prefix to make it more clear
>> these are for ath10k:
>> 
>>    dt: bindings: ath10k: .....
> 
> There were conflicts with this commit:
> 
> 2b741a8aaa34 dt: bindings: add bindings for msa memory region
> 
> I fixed them in the pending branch, please double check carefully:
> 

Changes looks good to me.

> https://git.kernel.org/pub/scm/linux/kernel/git/kvalo/ath.git/commit/?h=pending&id=5bb88d4d49783c75ac083e4ea19b7527bc115857
> 
> https://git.kernel.org/pub/scm/linux/kernel/git/kvalo/ath.git/commit/?h=pending&id=a6d53e207670eacd72a74277658bac1ab346fabd

BR,
Govind