[RFC PATCH v2 03/15] dt-bindings: add binding for USBSS-DRD controller.

From: Pawel Laszczak <pawell@cadence.com>
To: <devicetree@vger.kernel.org>
Cc: <gregkh@linuxfoundation.org>, <linux-usb@vger.kernel.org>,
	<rogerq@ti.com>, <linux-kernel@vger.kernel.org>,
	<adouglas@cadence.com>, <jbergsagel@ti.com>, <nsekhar@ti.com>,
	<nm@ti.com>, <sureshp@cadence.com>, <peter.chen@nxp.com>,
	<pjez@cadence.com>, <kurahul@cadence.com>,
	"Pawel Laszczak" <pawell@cadence.com>
Subject: [RFC PATCH v2 03/15] dt-bindings: add binding for USBSS-DRD controller.
Date: Sun, 18 Nov 2018 10:08:59 +0000	[thread overview]
Message-ID: <1542535751-16079-4-git-send-email-pawell@cadence.com> (raw)
In-Reply-To: <1542535751-16079-1-git-send-email-pawell@cadence.com>

Thsi patch aim at documenting USB related dt-bindings for the
Cadence USBSS-DRD controller.

Signed-off-by: Pawel Laszczak <pawell@cadence.com>
---
 .../devicetree/bindings/usb/cdns3-usb.txt       | 17 +++++++++++++++++
 1 file changed, 17 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/usb/cdns3-usb.txt

diff --git a/Documentation/devicetree/bindings/usb/cdns3-usb.txt b/Documentation/devicetree/bindings/usb/cdns3-usb.txt
new file mode 100644
index 000000000000..f9e953f32d47
--- /dev/null
+++ b/Documentation/devicetree/bindings/usb/cdns3-usb.txt
@@ -0,0 +1,17 @@
+Binding for the Cadence USBSS-DRD controller
+
+Required properties:
+  - reg: Physical base address and size of the controller's register area.
+  - compatible: Should contain: "cdns,usb3"
+  - interrupts: Interrupt specifier. Refer to interrupt bindings.
+
+
+Example:
+	cdns3@f3000000 {
+		compatible = "cdns,usb3";
+		interrupts = <USB_IRQ  7 IRQ_TYPE_LEVEL_HIGH>;
+		reg = <0xf3000000 0x10000	//memory area for OTG/DRD registers
+			0xf3010000 0x10000	//memory area for HOST registers
+			0xf3020000 0x10000>;	//memory area for Device registers
+	};
+
-- 
2.17.1

