[PATCH v2 2/5] devfreq: add support for suspend/resume of a devfreq device

[Lukasz Luba <l.luba@partner.samsung.com>]

The patch prepares devfreq device for handling suspend/resume
functionality.  The new fields will store needed information during this
process.  Devfreq framework handles opp-suspend DT entry and there is no
need of modyfications in the drivers code.  It uses atomic variables to
make sure no race condition affects the process.

The patch is based on earlier work by Tobias Jakobi.

Suggested-by: Tobias Jakobi <tjakobi@math.uni-bielefeld.de>
Suggested-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Lukasz Luba <l.luba@partner.samsung.com>
---
 drivers/devfreq/devfreq.c | 51 +++++++++++++++++++++++++++++++++++++++--------
 include/linux/devfreq.h   |  7 +++++++
 2 files changed, 50 insertions(+), 8 deletions(-)

diff --git a/drivers/devfreq/devfreq.c b/drivers/devfreq/devfreq.c
index a9fd61b..36bed24 100644
--- a/drivers/devfreq/devfreq.c
+++ b/drivers/devfreq/devfreq.c
@@ -316,6 +316,10 @@ static int devfreq_set_target(struct devfreq *devfreq, unsigned long new_freq,
 			"Couldn't update frequency transition information.\n");
 
 	devfreq->previous_freq = new_freq;
+
+	if (devfreq->suspend_freq)
+		devfreq->resume_freq = cur_freq;
+
 	return err;
 }
 
@@ -667,6 +671,9 @@ struct devfreq *devfreq_add_device(struct device *dev,
 	}
 	devfreq->max_freq = devfreq->scaling_max_freq;
 
+	devfreq->suspend_freq = dev_pm_opp_get_suspend_opp_freq(dev);
+	atomic_set(&devfreq->suspend_count, 0);
+
 	dev_set_name(&devfreq->dev, "devfreq%d",
 				atomic_inc_return(&devfreq_no));
 	err = device_register(&devfreq->dev);
@@ -867,14 +874,28 @@ EXPORT_SYMBOL(devm_devfreq_remove_device);
  */
 int devfreq_suspend_device(struct devfreq *devfreq)
 {
+	int ret;
+
 	if (!devfreq)
 		return -EINVAL;
 
-	if (!devfreq->governor)
-		return 0;
+	if (devfreq->governor) {
+		ret = devfreq->governor->event_handler(devfreq,
+					DEVFREQ_GOV_SUSPEND, NULL);
+		if (ret)
+			return ret;
+	}
+
+	if (devfreq->suspend_freq) {
+		if (atomic_inc_return(&devfreq->suspend_count) > 1)
+			return 0;
+
+		ret = devfreq_set_target(devfreq, devfreq->suspend_freq, 0);
+		if (ret)
+			return ret;
+	}
 
-	return devfreq->governor->event_handler(devfreq,
-				DEVFREQ_GOV_SUSPEND, NULL);
+	return 0;
 }
 EXPORT_SYMBOL(devfreq_suspend_device);
 
@@ -888,14 +909,28 @@ EXPORT_SYMBOL(devfreq_suspend_device);
  */
 int devfreq_resume_device(struct devfreq *devfreq)
 {
+	int ret;
+
 	if (!devfreq)
 		return -EINVAL;
 
-	if (!devfreq->governor)
-		return 0;
+	if (devfreq->resume_freq) {
+		if (atomic_dec_return(&devfreq->suspend_count) >= 1)
+			return 0;
 
-	return devfreq->governor->event_handler(devfreq,
-				DEVFREQ_GOV_RESUME, NULL);
+		ret = devfreq_set_target(devfreq, devfreq->resume_freq, 0);
+		if (ret)
+			return ret;
+	}
+
+	if (devfreq->governor) {
+		ret = devfreq->governor->event_handler(devfreq,
+					DEVFREQ_GOV_RESUME, NULL);
+		if (ret)
+			return ret;
+	}
+
+	return 0;
 }
 EXPORT_SYMBOL(devfreq_resume_device);
 
diff --git a/include/linux/devfreq.h b/include/linux/devfreq.h
index e4963b0..d985199 100644
--- a/include/linux/devfreq.h
+++ b/include/linux/devfreq.h
@@ -131,6 +131,9 @@ struct devfreq_dev_profile {
  * @scaling_min_freq:	Limit minimum frequency requested by OPP interface
  * @scaling_max_freq:	Limit maximum frequency requested by OPP interface
  * @stop_polling:	 devfreq polling status of a device.
+ * @suspend_freq:	 frequency of a device set during suspend phase.
+ * @resume_freq:	 frequency of a device set in resume phase.
+ * @suspend_count:	 suspend requests counter for a device.
  * @total_trans:	Number of devfreq transitions
  * @trans_table:	Statistics of devfreq transitions
  * @time_in_state:	Statistics of devfreq states
@@ -167,6 +170,10 @@ struct devfreq {
 	unsigned long scaling_max_freq;
 	bool stop_polling;
 
+	unsigned long suspend_freq;
+	unsigned long resume_freq;
+	atomic_t suspend_count;
+
 	/* information for device frequency transition */
 	unsigned int total_trans;
 	unsigned int *trans_table;
-- 
2.7.4