[PATCH v5 0/2] hisi_sas: DIF support

[PATCH v5 0/2] hisi_sas: DIF support

[John Garry]

This patchset introduces support to the driver for DIF/DIX.

We are making DIX support as RFC for now, based on issues discussed in the
following:
https://marc.info/?l=linux-scsi&m=154357719329297&w=4 and
https://marc.info/?l=linux-scsi&m=154406987703456&w=2

We will only support PI in v3 hw at the moment, even though previous hw
versions also support it.

Differences:
v4->v5:
- Drop already accepted patches
- Fix comments according to Martin
  - use t10_pi_ref_tag()
  - stop using protection options in LLDD in favour of prot flags
  - allow user to set prot mask

v3->v4:
- re-add DIX support as RFC - do not commit please!
- also DIX support is labelled experimental in the driver

v2->v3:
- fix sparse warnings
- drop DIX support

v1->v2:
- drop scsi_prot_op_normal()
Xiang Chen (2):
  scsi: hisi_sas: Add support for DIF feature for v2 hw
  scsi: hisi_sas: Add support for DIX feature for v3 hw as experimental

 drivers/scsi/hisi_sas/hisi_sas.h       |  28 +++++
 drivers/scsi/hisi_sas/hisi_sas_main.c  |  97 ++++++++++++++--
 drivers/scsi/hisi_sas/hisi_sas_v3_hw.c | 197 ++++++++++++++++++++++++++++++++-
 3 files changed, 305 insertions(+), 17 deletions(-)

-- 
1.9.1

[PATCH v5 1/2] scsi: hisi_sas: Add support for DIF feature for v2 hw

[John Garry]

From: Xiang Chen <chenxiang66@hisilicon.com>

For v3 hw, we support DIF operation for SAS, but not SATA.

In addition, DIF CRC16 is supported.

This patchset adds the SW support for the described features. The main
components are as follows:
- Get protection mask from module param
- Fill PI fields
- Fill related to DIF in DQ and protection iu memories

Signed-off-by: Xiang Chen <chenxiang66@hisilicon.com>
Signed-off-by: John Garry <john.garry@huawei.com>
---
 drivers/scsi/hisi_sas/hisi_sas.h       |   8 ++
 drivers/scsi/hisi_sas/hisi_sas_v3_hw.c | 132 ++++++++++++++++++++++++++++++++-
 2 files changed, 137 insertions(+), 3 deletions(-)

diff --git a/drivers/scsi/hisi_sas/hisi_sas.h b/drivers/scsi/hisi_sas/hisi_sas.h
index 912d234..af29194 100644
--- a/drivers/scsi/hisi_sas/hisi_sas.h
+++ b/drivers/scsi/hisi_sas/hisi_sas.h
@@ -69,6 +69,12 @@
 #define HISI_SAS_SATA_PROTOCOL_FPDMA		0x8
 #define HISI_SAS_SATA_PROTOCOL_ATAPI		0x10
 
+#define HISI_SAS_DIF_PROT_MASK (SHOST_DIF_TYPE1_PROTECTION | \
+				SHOST_DIF_TYPE2_PROTECTION | \
+				SHOST_DIF_TYPE3_PROTECTION)
+
+#define HISI_SAS_PROT_MASK (HISI_SAS_DIF_PROT_MASK)
+
 struct hisi_hba;
 
 enum {
@@ -268,6 +274,8 @@ struct hisi_hba {
 	struct pci_dev *pci_dev;
 	struct device *dev;
 
+	int prot_mask;
+
 	void __iomem *regs;
 	void __iomem *sgpio_regs;
 	struct regmap *ctrl;
diff --git a/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c b/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c
index 44781e3..6cd3c1a 100644
--- a/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c
+++ b/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c
@@ -127,6 +127,8 @@
 #define PHY_CTRL			(PORT_BASE + 0x14)
 #define PHY_CTRL_RESET_OFF		0
 #define PHY_CTRL_RESET_MSK		(0x1 << PHY_CTRL_RESET_OFF)
+#define CMD_HDR_PIR_OFF			8
+#define CMD_HDR_PIR_MSK			(0x1 << CMD_HDR_PIR_OFF)
 #define SL_CFG				(PORT_BASE + 0x84)
 #define AIP_LIMIT			(PORT_BASE + 0x90)
 #define SL_CONTROL			(PORT_BASE + 0x94)
@@ -333,6 +335,16 @@
 #define ITCT_HDR_RTOLT_OFF		48
 #define ITCT_HDR_RTOLT_MSK		(0xffffULL << ITCT_HDR_RTOLT_OFF)
 
+struct hisi_sas_protect_iu_v3_hw {
+	u32 dw0;
+	u32 lbrtcv;
+	u32 lbrtgv;
+	u32 dw3;
+	u32 dw4;
+	u32 dw5;
+	u32 rsv;
+};
+
 struct hisi_sas_complete_v3_hdr {
 	__le32 dw0;
 	__le32 dw1;
@@ -372,9 +384,28 @@ struct hisi_sas_err_record_v3 {
 	((fis.command == ATA_CMD_DEV_RESET) && \
 	((fis.control & ATA_SRST) != 0)))
 
+#define T10_INSRT_EN_OFF    0
+#define T10_INSRT_EN_MSK    (1 << T10_INSRT_EN_OFF)
+#define T10_RMV_EN_OFF	    1
+#define T10_RMV_EN_MSK	    (1 << T10_RMV_EN_OFF)
+#define T10_RPLC_EN_OFF	    2
+#define T10_RPLC_EN_MSK	    (1 << T10_RPLC_EN_OFF)
+#define T10_CHK_EN_OFF	    3
+#define T10_CHK_EN_MSK	    (1 << T10_CHK_EN_OFF)
+#define INCR_LBRT_OFF	    5
+#define INCR_LBRT_MSK	    (1 << INCR_LBRT_OFF)
+#define USR_DATA_BLOCK_SZ_OFF	20
+#define USR_DATA_BLOCK_SZ_MSK	(0x3 << USR_DATA_BLOCK_SZ_OFF)
+#define T10_CHK_MSK_OFF	    16
+
 static bool hisi_sas_intr_conv;
 MODULE_PARM_DESC(intr_conv, "interrupt converge enable (0-1)");
 
+/* permit overriding the host protection capabilities mask (EEDP/T10 PI) */
+static int prot_mask;
+module_param(prot_mask, int, 0);
+MODULE_PARM_DESC(prot_mask, " host protection capabilities mask, def=0x0 ");
+
 static u32 hisi_sas_read32(struct hisi_hba *hisi_hba, u32 off)
 {
 	void __iomem *regs = hisi_hba->regs + off;
@@ -941,6 +972,58 @@ static void prep_prd_sge_v3_hw(struct hisi_hba *hisi_hba,
 	hdr->sg_len = cpu_to_le32(n_elem << CMD_HDR_DATA_SGL_LEN_OFF);
 }
 
+static u32 get_prot_chk_msk_v3_hw(struct scsi_cmnd *scsi_cmnd)
+{
+	unsigned char prot_flags = scsi_cmnd->prot_flags;
+
+	if (prot_flags & SCSI_PROT_TRANSFER_PI) {
+		if (prot_flags & SCSI_PROT_REF_CHECK)
+			return 0xc << 16;
+		return 0xfc << 16;
+	}
+	return 0;
+}
+
+static void fill_prot_v3_hw(struct scsi_cmnd *scsi_cmnd,
+			    struct hisi_sas_protect_iu_v3_hw *prot)
+{
+	unsigned char prot_op = scsi_get_prot_op(scsi_cmnd);
+	unsigned int interval = scsi_prot_interval(scsi_cmnd);
+	u32 lbrt_chk_val = t10_pi_ref_tag(scsi_cmnd->request);
+
+	switch (prot_op) {
+	case SCSI_PROT_READ_STRIP:
+		prot->dw0 |= (T10_RMV_EN_MSK | T10_CHK_EN_MSK);
+		prot->lbrtcv = lbrt_chk_val;
+		prot->dw4 |= get_prot_chk_msk_v3_hw(scsi_cmnd);
+		break;
+	case SCSI_PROT_WRITE_INSERT:
+		prot->dw0 |= T10_INSRT_EN_MSK;
+		prot->lbrtgv = lbrt_chk_val;
+		break;
+	default:
+		WARN(1, "prot_op(0x%x) is not valid\n", prot_op);
+		break;
+	}
+
+	switch (interval) {
+	case 512:
+		break;
+	case 4096:
+		prot->dw0 |= (0x1 << USR_DATA_BLOCK_SZ_OFF);
+		break;
+	case 520:
+		prot->dw0 |= (0x2 << USR_DATA_BLOCK_SZ_OFF);
+		break;
+	default:
+		WARN(1, "protection interval (0x%x) invalid\n",
+		     interval);
+		break;
+	}
+
+	prot->dw0 |= INCR_LBRT_MSK;
+}
+
 static void prep_ssp_v3_hw(struct hisi_hba *hisi_hba,
 			  struct hisi_sas_slot *slot)
 {
@@ -952,9 +1035,10 @@ static void prep_ssp_v3_hw(struct hisi_hba *hisi_hba,
 	struct sas_ssp_task *ssp_task = &task->ssp_task;
 	struct scsi_cmnd *scsi_cmnd = ssp_task->cmd;
 	struct hisi_sas_tmf_task *tmf = slot->tmf;
+	unsigned char prot_op = scsi_get_prot_op(scsi_cmnd);
 	int has_data = 0, priority = !!tmf;
 	u8 *buf_cmd;
-	u32 dw1 = 0, dw2 = 0;
+	u32 dw1 = 0, dw2 = 0, len = 0;
 
 	hdr->dw0 = cpu_to_le32((1 << CMD_HDR_RESP_REPORT_OFF) |
 			       (2 << CMD_HDR_TLR_CTRL_OFF) |
@@ -984,7 +1068,6 @@ static void prep_ssp_v3_hw(struct hisi_hba *hisi_hba,
 
 	/* map itct entry */
 	dw1 |= sas_dev->device_id << CMD_HDR_DEV_ID_OFF;
-	hdr->dw1 = cpu_to_le32(dw1);
 
 	dw2 = (((sizeof(struct ssp_command_iu) + sizeof(struct ssp_frame_hdr)
 	      + 3) / 4) << CMD_HDR_CFL_OFF) |
@@ -997,7 +1080,6 @@ static void prep_ssp_v3_hw(struct hisi_hba *hisi_hba,
 		prep_prd_sge_v3_hw(hisi_hba, slot, hdr, task->scatter,
 					slot->n_elem);
 
-	hdr->data_transfer_len = cpu_to_le32(task->total_xfer_len);
 	hdr->cmd_table_addr = cpu_to_le64(hisi_sas_cmd_hdr_addr_dma(slot));
 	hdr->sts_buffer_addr = cpu_to_le64(hisi_sas_status_buf_addr_dma(slot));
 
@@ -1022,6 +1104,38 @@ static void prep_ssp_v3_hw(struct hisi_hba *hisi_hba,
 			break;
 		}
 	}
+
+	if (has_data && (prot_op != SCSI_PROT_NORMAL)) {
+		struct hisi_sas_protect_iu_v3_hw prot;
+		u8 *buf_cmd_prot;
+
+		hdr->dw7 |= cpu_to_le32(1 << CMD_HDR_ADDR_MODE_SEL_OFF);
+		dw1 |= CMD_HDR_PIR_MSK;
+		buf_cmd_prot = hisi_sas_cmd_hdr_addr_mem(slot) +
+			       sizeof(struct ssp_frame_hdr) +
+			       sizeof(struct ssp_command_iu);
+
+		memset(&prot, 0, sizeof(struct hisi_sas_protect_iu_v3_hw));
+		fill_prot_v3_hw(scsi_cmnd, &prot);
+		memcpy(buf_cmd_prot, &prot,
+		       sizeof(struct hisi_sas_protect_iu_v3_hw));
+
+		/*
+		 * For READ, we need length of info read to memory, while for
+		 * WRITE we need length of data written to the disk.
+		 */
+		if (prot_op == SCSI_PROT_WRITE_INSERT) {
+			unsigned int interval = scsi_prot_interval(scsi_cmnd);
+			unsigned int ilog2_interval = ilog2(interval);
+
+			len = (task->total_xfer_len >> ilog2_interval) * 8;
+		}
+
+	}
+
+	hdr->dw1 = cpu_to_le32(dw1);
+
+	hdr->data_transfer_len = cpu_to_le32(task->total_xfer_len + len);
 }
 
 static void prep_smp_v3_hw(struct hisi_hba *hisi_hba,
@@ -2292,6 +2406,12 @@ static ssize_t intr_coal_count_v3_hw_store(struct device *dev,
 	hisi_hba->shost = shost;
 	SHOST_TO_SAS_HA(shost) = &hisi_hba->sha;
 
+	if (prot_mask & ~HISI_SAS_PROT_MASK)
+		dev_err(dev, "unsupported protection mask 0x%x, using default (0x0)\n",
+			prot_mask);
+	else
+		hisi_hba->prot_mask = prot_mask;
+
 	timer_setup(&hisi_hba->timer, NULL, 0);
 
 	if (hisi_sas_get_fw_info(hisi_hba) < 0)
@@ -2402,6 +2522,12 @@ static ssize_t intr_coal_count_v3_hw_store(struct device *dev,
 	if (rc)
 		goto err_out_register_ha;
 
+	if (hisi_hba->prot_mask) {
+		dev_info(dev, "Registering for DIF/DIX prot_mask=0x%x\n",
+			 prot_mask);
+		scsi_host_set_prot(hisi_hba->shost, prot_mask);
+	}
+
 	scsi_scan_host(shost);
 
 	return 0;
-- 
1.9.1

[RFC PATCH v5 2/2] scsi: hisi_sas: Add support for DIX feature for v3 hw as experimental

[John Garry]

From: Xiang Chen <chenxiang66@hisilicon.com>

This patchset adds support for DIX to v3 hw driver.

As discussed in the following thread, DIX seems to be in conflict with
SCSI MQ, so this is why we mark the support for this driver as
experimental:
https://marc.info/?l=linux-scsi&m=154392687627603&w=2,

As for DIX support itself, we build upon support for DIF, most
significantly is adding new DMA map and unmap paths.

Signed-off-by: Xiang Chen <chenxiang66@hisilicon.com>
Signed-off-by: John Garry <john.garry@huawei.com>
---
 drivers/scsi/hisi_sas/hisi_sas.h       | 22 +++++++-
 drivers/scsi/hisi_sas/hisi_sas_main.c  | 97 ++++++++++++++++++++++++++++++----
 drivers/scsi/hisi_sas/hisi_sas_v3_hw.c | 75 +++++++++++++++++++++++---
 3 files changed, 174 insertions(+), 20 deletions(-)

diff --git a/drivers/scsi/hisi_sas/hisi_sas.h b/drivers/scsi/hisi_sas/hisi_sas.h
index af29194..4663f19 100644
--- a/drivers/scsi/hisi_sas/hisi_sas.h
+++ b/drivers/scsi/hisi_sas/hisi_sas.h
@@ -55,6 +55,11 @@
 #define hisi_sas_sge_addr_mem(slot) hisi_sas_sge_addr(slot->buf)
 #define hisi_sas_sge_addr_dma(slot) hisi_sas_sge_addr(slot->buf_dma)
 
+#define hisi_sas_sge_dif_addr(buf) \
+	(buf + offsetof(struct hisi_sas_slot_dif_buf_table, sge_dif_page))
+#define hisi_sas_sge_dif_addr_mem(slot) hisi_sas_sge_dif_addr(slot->buf)
+#define hisi_sas_sge_dif_addr_dma(slot) hisi_sas_sge_dif_addr(slot->buf_dma)
+
 #define HISI_SAS_MAX_SSP_RESP_SZ (sizeof(struct ssp_frame_hdr) + 1024)
 #define HISI_SAS_MAX_SMP_RESP_SZ 1028
 #define HISI_SAS_MAX_STP_RESP_SZ 28
@@ -73,7 +78,11 @@
 				SHOST_DIF_TYPE2_PROTECTION | \
 				SHOST_DIF_TYPE3_PROTECTION)
 
-#define HISI_SAS_PROT_MASK (HISI_SAS_DIF_PROT_MASK)
+#define HISI_SAS_DIX_PROT_MASK (SHOST_DIX_TYPE1_PROTECTION | \
+				SHOST_DIX_TYPE2_PROTECTION | \
+				SHOST_DIX_TYPE3_PROTECTION)
+
+#define HISI_SAS_PROT_MASK (HISI_SAS_DIF_PROT_MASK | HISI_SAS_DIX_PROT_MASK)
 
 struct hisi_hba;
 
@@ -203,6 +212,7 @@ struct hisi_sas_slot {
 	struct sas_task *task;
 	struct hisi_sas_port	*port;
 	u64	n_elem;
+	u64	n_elem_dif;
 	int	dlvry_queue;
 	int	dlvry_queue_slot;
 	int	cmplt_queue;
@@ -430,6 +440,11 @@ struct hisi_sas_sge_page {
 	struct hisi_sas_sge sge[HISI_SAS_SGE_PAGE_CNT];
 }  __aligned(16);
 
+#define HISI_SAS_SGE_DIF_PAGE_CNT   SG_CHUNK_SIZE
+struct hisi_sas_sge_dif_page {
+	struct hisi_sas_sge sge[HISI_SAS_SGE_DIF_PAGE_CNT];
+}  __aligned(16);
+
 struct hisi_sas_command_table_ssp {
 	struct ssp_frame_hdr hdr;
 	union {
@@ -460,6 +475,11 @@ struct hisi_sas_slot_buf_table {
 	struct hisi_sas_sge_page sge_page;
 };
 
+struct hisi_sas_slot_dif_buf_table {
+	struct hisi_sas_slot_buf_table slot_buf;
+	struct hisi_sas_sge_dif_page sge_dif_page;
+};
+
 extern struct scsi_transport_template *hisi_sas_stt;
 extern void hisi_sas_stop_phys(struct hisi_hba *hisi_hba);
 extern int hisi_sas_alloc(struct hisi_hba *hisi_hba, struct Scsi_Host *shost);
diff --git a/drivers/scsi/hisi_sas/hisi_sas_main.c b/drivers/scsi/hisi_sas/hisi_sas_main.c
index eed7fc5..a518ac7 100644
--- a/drivers/scsi/hisi_sas/hisi_sas_main.c
+++ b/drivers/scsi/hisi_sas/hisi_sas_main.c
@@ -252,14 +252,21 @@ void hisi_sas_slot_task_free(struct hisi_hba *hisi_hba, struct sas_task *task,
 
 		task->lldd_task = NULL;
 
-		if (!sas_protocol_ata(task->task_proto))
+		if (!sas_protocol_ata(task->task_proto)) {
+			struct sas_ssp_task *ssp_task = &task->ssp_task;
+			struct scsi_cmnd *scsi_cmnd = ssp_task->cmd;
+
 			if (slot->n_elem)
 				dma_unmap_sg(dev, task->scatter,
 					     task->num_scatter,
 					     task->data_dir);
+			if (slot->n_elem_dif)
+				dma_unmap_sg(dev, scsi_prot_sglist(scsi_cmnd),
+					     scsi_prot_sg_count(scsi_cmnd),
+					     task->data_dir);
+		}
 	}
 
-
 	spin_lock_irqsave(&dq->lock, flags);
 	list_del_init(&slot->entry);
 	spin_unlock_irqrestore(&dq->lock, flags);
@@ -380,6 +387,59 @@ static int hisi_sas_dma_map(struct hisi_hba *hisi_hba,
 	return rc;
 }
 
+static void hisi_sas_dif_dma_unmap(struct hisi_hba *hisi_hba,
+				   struct sas_task *task, int n_elem_dif)
+{
+	struct device *dev = hisi_hba->dev;
+
+	if (n_elem_dif) {
+		struct sas_ssp_task *ssp_task = &task->ssp_task;
+		struct scsi_cmnd *scsi_cmnd = ssp_task->cmd;
+
+		dma_unmap_sg(dev, scsi_prot_sglist(scsi_cmnd),
+			     scsi_prot_sg_count(scsi_cmnd),
+			     task->data_dir);
+	}
+}
+
+static int hisi_sas_dif_dma_map(struct hisi_hba *hisi_hba,
+				int *n_elem_dif, struct sas_task *task)
+{
+	struct device *dev = hisi_hba->dev;
+	struct sas_ssp_task *ssp_task;
+	struct scsi_cmnd *scsi_cmnd;
+	int rc;
+
+	if (task->num_scatter) {
+		ssp_task = &task->ssp_task;
+		scsi_cmnd = ssp_task->cmd;
+
+		if (scsi_prot_sg_count(scsi_cmnd)) {
+			*n_elem_dif = dma_map_sg(dev,
+						 scsi_prot_sglist(scsi_cmnd),
+						 scsi_prot_sg_count(scsi_cmnd),
+						 task->data_dir);
+
+			if (!*n_elem_dif)
+				return -ENOMEM;
+
+			if (*n_elem_dif > HISI_SAS_SGE_DIF_PAGE_CNT) {
+				dev_err(dev, "task prep: n_elem_dif(%d) too large\n",
+					*n_elem_dif);
+				rc = -EINVAL;
+				goto err_out_dif_dma_unmap;
+			}
+		}
+	}
+
+	return 0;
+
+err_out_dif_dma_unmap:
+	dma_unmap_sg(dev, scsi_prot_sglist(scsi_cmnd),
+		     scsi_prot_sg_count(scsi_cmnd), task->data_dir);
+	return rc;
+}
+
 static int hisi_sas_task_prep(struct sas_task *task,
 			      struct hisi_sas_dq **dq_pointer,
 			      bool is_tmf, struct hisi_sas_tmf_task *tmf,
@@ -394,7 +454,7 @@ static int hisi_sas_task_prep(struct sas_task *task,
 	struct asd_sas_port *sas_port = device->port;
 	struct device *dev = hisi_hba->dev;
 	int dlvry_queue_slot, dlvry_queue, rc, slot_idx;
-	int n_elem = 0, n_elem_req = 0, n_elem_resp = 0;
+	int n_elem = 0, n_elem_dif = 0, n_elem_req = 0, n_elem_resp = 0;
 	struct hisi_sas_dq *dq;
 	unsigned long flags;
 	int wr_q_index;
@@ -427,6 +487,12 @@ static int hisi_sas_task_prep(struct sas_task *task,
 	if (rc < 0)
 		goto prep_out;
 
+	if (!sas_protocol_ata(task->task_proto)) {
+		rc = hisi_sas_dif_dma_map(hisi_hba, &n_elem_dif, task);
+		if (rc < 0)
+			goto err_out_dma_unmap;
+	}
+
 	if (hisi_hba->hw->slot_index_alloc)
 		rc = hisi_hba->hw->slot_index_alloc(hisi_hba, device);
 	else {
@@ -445,7 +511,7 @@ static int hisi_sas_task_prep(struct sas_task *task,
 		rc  = hisi_sas_slot_index_alloc(hisi_hba, scsi_cmnd);
 	}
 	if (rc < 0)
-		goto err_out_dma_unmap;
+		goto err_out_dif_dma_unmap;
 
 	slot_idx = rc;
 	slot = &hisi_hba->slot_info[slot_idx];
@@ -466,6 +532,7 @@ static int hisi_sas_task_prep(struct sas_task *task,
 	dlvry_queue_slot = wr_q_index;
 
 	slot->n_elem = n_elem;
+	slot->n_elem_dif = n_elem_dif;
 	slot->dlvry_queue = dlvry_queue;
 	slot->dlvry_queue_slot = dlvry_queue_slot;
 	cmd_hdr_base = hisi_hba->cmd_hdr[dlvry_queue];
@@ -509,6 +576,9 @@ static int hisi_sas_task_prep(struct sas_task *task,
 
 err_out_tag:
 	hisi_sas_slot_index_free(hisi_hba, slot_idx);
+err_out_dif_dma_unmap:
+	if (!sas_protocol_ata(task->task_proto))
+		hisi_sas_dif_dma_unmap(hisi_hba, task, n_elem_dif);
 err_out_dma_unmap:
 	hisi_sas_dma_unmap(hisi_hba, task, n_elem,
 			   n_elem_req, n_elem_resp);
@@ -2144,19 +2214,24 @@ int hisi_sas_alloc(struct hisi_hba *hisi_hba, struct Scsi_Host *shost)
 
 	/* roundup to avoid overly large block size */
 	max_command_entries_ru = roundup(max_command_entries, 64);
-	sz_slot_buf_ru = roundup(sizeof(struct hisi_sas_slot_buf_table), 64);
+	if (hisi_hba->prot_mask & HISI_SAS_DIX_PROT_MASK)
+		sz_slot_buf_ru = sizeof(struct hisi_sas_slot_dif_buf_table);
+	else
+		sz_slot_buf_ru = sizeof(struct hisi_sas_slot_buf_table);
+	sz_slot_buf_ru = roundup(sz_slot_buf_ru, 64);
 	s = lcm(max_command_entries_ru, sz_slot_buf_ru);
 	blk_cnt = (max_command_entries_ru * sz_slot_buf_ru) / s;
 	slots_per_blk = s / sz_slot_buf_ru;
+
 	for (i = 0; i < blk_cnt; i++) {
-		struct hisi_sas_slot_buf_table *buf;
-		dma_addr_t buf_dma;
 		int slot_index = i * slots_per_blk;
+		dma_addr_t buf_dma;
+		void *buf;
 
-		buf = dmam_alloc_coherent(dev, s, &buf_dma, GFP_KERNEL);
+		buf = dmam_alloc_coherent(dev, s, &buf_dma,
+					  GFP_KERNEL | __GFP_ZERO);
 		if (!buf)
 			goto err_out;
-		memset(buf, 0, s);
 
 		for (j = 0; j < slots_per_blk; j++, slot_index++) {
 			struct hisi_sas_slot *slot;
@@ -2166,8 +2241,8 @@ int hisi_sas_alloc(struct hisi_hba *hisi_hba, struct Scsi_Host *shost)
 			slot->buf_dma = buf_dma;
 			slot->idx = slot_index;
 
-			buf++;
-			buf_dma += sizeof(*buf);
+			buf += sz_slot_buf_ru;
+			buf_dma += sz_slot_buf_ru;
 		}
 	}
 
diff --git a/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c b/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c
index 6cd3c1a..a8dd80f 100644
--- a/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c
+++ b/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c
@@ -969,7 +969,34 @@ static void prep_prd_sge_v3_hw(struct hisi_hba *hisi_hba,
 
 	hdr->prd_table_addr = cpu_to_le64(hisi_sas_sge_addr_dma(slot));
 
-	hdr->sg_len = cpu_to_le32(n_elem << CMD_HDR_DATA_SGL_LEN_OFF);
+	hdr->sg_len |= cpu_to_le32(n_elem << CMD_HDR_DATA_SGL_LEN_OFF);
+}
+
+static void prep_prd_sge_dif_v3_hw(struct hisi_hba *hisi_hba,
+				  struct hisi_sas_slot *slot,
+				  struct hisi_sas_cmd_hdr *hdr,
+				  struct scatterlist *scatter,
+				  int n_elem)
+{
+	struct hisi_sas_sge_dif_page *sge_dif_page;
+	struct scatterlist *sg;
+	int i;
+
+	sge_dif_page = hisi_sas_sge_dif_addr_mem(slot);
+
+	for_each_sg(scatter, sg, n_elem, i) {
+		struct hisi_sas_sge *entry = &sge_dif_page->sge[i];
+
+		entry->addr = cpu_to_le64(sg_dma_address(sg));
+		entry->page_ctrl_0 = entry->page_ctrl_1 = 0;
+		entry->data_len = cpu_to_le32(sg_dma_len(sg));
+		entry->data_off = 0;
+	}
+
+	hdr->dif_prd_table_addr = cpu_to_le64(
+			hisi_sas_sge_dif_addr_dma(slot));
+
+	hdr->sg_len |= cpu_to_le32(n_elem << CMD_HDR_DIF_SGL_LEN_OFF);
 }
 
 static u32 get_prot_chk_msk_v3_hw(struct scsi_cmnd *scsi_cmnd)
@@ -992,15 +1019,33 @@ static void fill_prot_v3_hw(struct scsi_cmnd *scsi_cmnd,
 	u32 lbrt_chk_val = t10_pi_ref_tag(scsi_cmnd->request);
 
 	switch (prot_op) {
+	case SCSI_PROT_READ_INSERT:
+		prot->dw0 |= T10_INSRT_EN_MSK;
+		prot->lbrtgv = lbrt_chk_val;
+		break;
 	case SCSI_PROT_READ_STRIP:
 		prot->dw0 |= (T10_RMV_EN_MSK | T10_CHK_EN_MSK);
 		prot->lbrtcv = lbrt_chk_val;
 		prot->dw4 |= get_prot_chk_msk_v3_hw(scsi_cmnd);
 		break;
+	case SCSI_PROT_READ_PASS:
+		prot->dw0 |= T10_CHK_EN_MSK;
+		prot->lbrtcv = lbrt_chk_val;
+		prot->dw4 |= get_prot_chk_msk_v3_hw(scsi_cmnd);
+		break;
 	case SCSI_PROT_WRITE_INSERT:
 		prot->dw0 |= T10_INSRT_EN_MSK;
 		prot->lbrtgv = lbrt_chk_val;
 		break;
+	case SCSI_PROT_WRITE_STRIP:
+		prot->dw0 |= (T10_RMV_EN_MSK | T10_CHK_EN_MSK);
+		prot->lbrtcv = lbrt_chk_val;
+		break;
+	case SCSI_PROT_WRITE_PASS:
+		prot->dw0 |= T10_CHK_EN_MSK;
+		prot->lbrtcv = lbrt_chk_val;
+		prot->dw4 |= get_prot_chk_msk_v3_hw(scsi_cmnd);
+		break;
 	default:
 		WARN(1, "prot_op(0x%x) is not valid\n", prot_op);
 		break;
@@ -1076,9 +1121,15 @@ static void prep_ssp_v3_hw(struct hisi_hba *hisi_hba,
 	hdr->dw2 = cpu_to_le32(dw2);
 	hdr->transfer_tags = cpu_to_le32(slot->idx);
 
-	if (has_data)
+	if (has_data) {
 		prep_prd_sge_v3_hw(hisi_hba, slot, hdr, task->scatter,
-					slot->n_elem);
+				   slot->n_elem);
+
+		if (scsi_prot_sg_count(scsi_cmnd))
+			prep_prd_sge_dif_v3_hw(hisi_hba, slot, hdr,
+					       scsi_prot_sglist(scsi_cmnd),
+					       slot->n_elem_dif);
+	}
 
 	hdr->cmd_table_addr = cpu_to_le64(hisi_sas_cmd_hdr_addr_dma(slot));
 	hdr->sts_buffer_addr = cpu_to_le64(hisi_sas_status_buf_addr_dma(slot));
@@ -1119,18 +1170,19 @@ static void prep_ssp_v3_hw(struct hisi_hba *hisi_hba,
 		fill_prot_v3_hw(scsi_cmnd, &prot);
 		memcpy(buf_cmd_prot, &prot,
 		       sizeof(struct hisi_sas_protect_iu_v3_hw));
-
 		/*
 		 * For READ, we need length of info read to memory, while for
 		 * WRITE we need length of data written to the disk.
 		 */
-		if (prot_op == SCSI_PROT_WRITE_INSERT) {
+		if ((prot_op == SCSI_PROT_WRITE_INSERT) ||
+			(prot_op == SCSI_PROT_READ_INSERT) ||
+			(prot_op == SCSI_PROT_WRITE_PASS) ||
+			(prot_op == SCSI_PROT_READ_PASS)) {
 			unsigned int interval = scsi_prot_interval(scsi_cmnd);
 			unsigned int ilog2_interval = ilog2(interval);
 
 			len = (task->total_xfer_len >> ilog2_interval) * 8;
 		}
-
 	}
 
 	hdr->dw1 = cpu_to_le32(dw1);
@@ -2346,6 +2398,7 @@ static ssize_t intr_coal_count_v3_hw_store(struct device *dev,
 	.bios_param		= sas_bios_param,
 	.this_id		= -1,
 	.sg_tablesize		= HISI_SAS_SGE_PAGE_CNT,
+	.sg_prot_tablesize	= HISI_SAS_SGE_PAGE_CNT,
 	.max_sectors		= SCSI_DEFAULT_MAX_SECTORS,
 	.use_clustering		= ENABLE_CLUSTERING,
 	.eh_device_reset_handler = sas_eh_device_reset_handler,
@@ -2522,10 +2575,16 @@ static ssize_t intr_coal_count_v3_hw_store(struct device *dev,
 	if (rc)
 		goto err_out_register_ha;
 
+
 	if (hisi_hba->prot_mask) {
-		dev_info(dev, "Registering for DIF/DIX prot_mask=0x%x\n",
-			 prot_mask);
+		int dix = hisi_hba->prot_mask & HISI_SAS_DIX_PROT_MASK;
+
+		dev_info(dev, "Registering for DIF/DIX prot_mask=0x%x %s\n",
+			 prot_mask, dix ? "(DIX experimental)" : "");
 		scsi_host_set_prot(hisi_hba->shost, prot_mask);
+		if (hisi_hba->prot_mask & HISI_SAS_DIX_PROT_MASK)
+			scsi_host_set_guard(hisi_hba->shost,
+					    SHOST_DIX_GUARD_CRC);
 	}
 
 	scsi_scan_host(shost);
-- 
1.9.1

Re: [PATCH v5 1/2] scsi: hisi_sas: Add support for DIF feature for v2 hw

[Martin K. Petersen]

John,

> From: Xiang Chen <chenxiang66@hisilicon.com>
>
> For v3 hw, we support DIF operation for SAS, but not SATA.
>
> In addition, DIF CRC16 is supported.
>
> This patchset adds the SW support for the described features. The main
> components are as follows:
> - Get protection mask from module param
> - Fill PI fields
> - Fill related to DIF in DQ and protection iu memories

Applied to 4.21/scsi-queue, thanks!

-- 
Martin K. Petersen	Oracle Linux Engineering

Re: [PATCH v5 1/2] scsi: hisi_sas: Add support for DIF feature for v2 hw

[John Garry]

On 19/12/2018 04:35, Martin K. Petersen wrote:
>
> John,
>
>> From: Xiang Chen <chenxiang66@hisilicon.com>
>>
>> For v3 hw, we support DIF operation for SAS, but not SATA.
>>
>> In addition, DIF CRC16 is supported.
>>
>> This patchset adds the SW support for the described features. The main
>> components are as follows:
>> - Get protection mask from module param
>> - Fill PI fields
>> - Fill related to DIF in DQ and protection iu memories
>
> Applied to 4.21/scsi-queue, thanks!
>

Thanks, and we're still looking at the DIX issue.

John