From: Stefan Popa <stefan.popa@analog.com>
To: <jic23@kernel.org>, <robh+dt@kernel.org>
Cc: Stefan Popa <stefan.popa@analog.com>,
<Michael.Hennerich@analog.com>, <knaack.h@gmx.de>,
<lars@metafoo.de>, <pmeerw@pmeerw.net>,
<gregkh@linuxfoundation.org>, <linux-kernel@vger.kernel.org>,
<linux-iio@vger.kernel.org>, <devicetree@vger.kernel.org>
Subject: [PATCH v3 6/7] iio: imu: adis16480: Add support for ADIS1649x family of devices
Date: Wed, 27 Feb 2019 18:14:27 +0200 [thread overview]
Message-ID: <1551284068-4882-7-git-send-email-stefan.popa@analog.com> (raw)
In-Reply-To: <1551284068-4882-1-git-send-email-stefan.popa@analog.com>
The ADIS16495 and ADIS16497 are inertial systems that include a triaxis
gyroscope and a triaxis accelerometer. The serial peripheral interface
(SPI) provide a simple interface for data collection and configuration
control. The devices are similar to ADIS16475, ADIS16480, ADIS16485 and
ADIS16488, the main differences are highlighted below:
* The temperature data scale is 0.00565 C/LSB for ADIS16475 and ADIS1648x
devices, while for ADIS1649x 0.0125 C/LSB.
* ADIS1649x devices support different gyroscope measurement ranges which
are dependent on the dash number (-1, -2, -3), see Table 24 in the
ADIS16495 datasheet. However, the ADIS16497 gyroscopes have the same
scale as ADIS16495.
* ADIS16495 devices support the acceleration maximum range of 8g, while
ADIS16497 devices go up to 40g.
* The internal clock for ADIS1649x devices is 4.25 kSPS. The sampling
frequency is calculated by applying a decimation rate which can take a
maximum value of 4250.
* ADIS1649x devices support different default filter frequencies.
Datasheets:
Link: https://www.analog.com/media/en/technical-documentation/data-sheets/adis16495.pdf
Link: https://www.analog.com/media/en/technical-documentation/data-sheets/adis16497.pdf
Signed-off-by: Stefan Popa <stefan.popa@analog.com>
---
drivers/iio/imu/adis16480.c | 97 +++++++++++++++++++++++++++++++++++++++++++++
1 file changed, 97 insertions(+)
diff --git a/drivers/iio/imu/adis16480.c b/drivers/iio/imu/adis16480.c
index c90375d..28cece3 100644
--- a/drivers/iio/imu/adis16480.c
+++ b/drivers/iio/imu/adis16480.c
@@ -453,6 +453,13 @@ static const unsigned int adis16480_def_filter_freqs[] = {
63,
};
+static const unsigned int adis16495_def_filter_freqs[] = {
+ 300,
+ 100,
+ 300,
+ 100,
+};
+
static const unsigned int ad16480_filter_data[][2] = {
[ADIS16480_SCAN_GYRO_X] = { ADIS16480_REG_FILTER_BNK0, 0 },
[ADIS16480_SCAN_GYRO_Y] = { ADIS16480_REG_FILTER_BNK0, 3 },
@@ -713,6 +720,12 @@ enum adis16480_variant {
ADIS16480,
ADIS16485,
ADIS16488,
+ ADIS16495_1,
+ ADIS16495_2,
+ ADIS16495_3,
+ ADIS16497_1,
+ ADIS16497_2,
+ ADIS16497_3,
};
static const struct adis16480_chip_info adis16480_chip_info[] = {
@@ -769,6 +782,78 @@ static const struct adis16480_chip_info adis16480_chip_info[] = {
.max_dec_rate = 2048,
.filter_freqs = adis16480_def_filter_freqs,
},
+ [ADIS16495_1] = {
+ .channels = adis16485_channels,
+ .num_channels = ARRAY_SIZE(adis16485_channels),
+ .gyro_max_val = IIO_RAD_TO_DEGREE(20000),
+ .gyro_max_scale = 125,
+ .accel_max_val = IIO_M_S_2_TO_G(32000),
+ .accel_max_scale = 8,
+ .temp_scale = 12500, /* 12.5 milli degree Celsius */
+ .int_clk = 4250000,
+ .max_dec_rate = 4250,
+ .filter_freqs = adis16495_def_filter_freqs,
+ },
+ [ADIS16495_2] = {
+ .channels = adis16485_channels,
+ .num_channels = ARRAY_SIZE(adis16485_channels),
+ .gyro_max_val = IIO_RAD_TO_DEGREE(18000),
+ .gyro_max_scale = 450,
+ .accel_max_val = IIO_M_S_2_TO_G(32000),
+ .accel_max_scale = 8,
+ .temp_scale = 12500, /* 12.5 milli degree Celsius */
+ .int_clk = 4250000,
+ .max_dec_rate = 4250,
+ .filter_freqs = adis16495_def_filter_freqs,
+ },
+ [ADIS16495_3] = {
+ .channels = adis16485_channels,
+ .num_channels = ARRAY_SIZE(adis16485_channels),
+ .gyro_max_val = IIO_RAD_TO_DEGREE(20000),
+ .gyro_max_scale = 2000,
+ .accel_max_val = IIO_M_S_2_TO_G(32000),
+ .accel_max_scale = 8,
+ .temp_scale = 12500, /* 12.5 milli degree Celsius */
+ .int_clk = 4250000,
+ .max_dec_rate = 4250,
+ .filter_freqs = adis16495_def_filter_freqs,
+ },
+ [ADIS16497_1] = {
+ .channels = adis16485_channels,
+ .num_channels = ARRAY_SIZE(adis16485_channels),
+ .gyro_max_val = IIO_RAD_TO_DEGREE(20000),
+ .gyro_max_scale = 125,
+ .accel_max_val = IIO_M_S_2_TO_G(32000),
+ .accel_max_scale = 40,
+ .temp_scale = 12500, /* 12.5 milli degree Celsius */
+ .int_clk = 4250000,
+ .max_dec_rate = 4250,
+ .filter_freqs = adis16495_def_filter_freqs,
+ },
+ [ADIS16497_2] = {
+ .channels = adis16485_channels,
+ .num_channels = ARRAY_SIZE(adis16485_channels),
+ .gyro_max_val = IIO_RAD_TO_DEGREE(18000),
+ .gyro_max_scale = 450,
+ .accel_max_val = IIO_M_S_2_TO_G(32000),
+ .accel_max_scale = 40,
+ .temp_scale = 12500, /* 12.5 milli degree Celsius */
+ .int_clk = 4250000,
+ .max_dec_rate = 4250,
+ .filter_freqs = adis16495_def_filter_freqs,
+ },
+ [ADIS16497_3] = {
+ .channels = adis16485_channels,
+ .num_channels = ARRAY_SIZE(adis16485_channels),
+ .gyro_max_val = IIO_RAD_TO_DEGREE(20000),
+ .gyro_max_scale = 2000,
+ .accel_max_val = IIO_M_S_2_TO_G(32000),
+ .accel_max_scale = 40,
+ .temp_scale = 12500, /* 12.5 milli degree Celsius */
+ .int_clk = 4250000,
+ .max_dec_rate = 4250,
+ .filter_freqs = adis16495_def_filter_freqs,
+ },
};
static const struct iio_info adis16480_info = {
@@ -1014,6 +1099,12 @@ static const struct spi_device_id adis16480_ids[] = {
{ "adis16480", ADIS16480 },
{ "adis16485", ADIS16485 },
{ "adis16488", ADIS16488 },
+ { "adis16495-1", ADIS16495_1 },
+ { "adis16495-2", ADIS16495_2 },
+ { "adis16495-3", ADIS16495_3 },
+ { "adis16497-1", ADIS16497_1 },
+ { "adis16497-2", ADIS16497_2 },
+ { "adis16497-3", ADIS16497_3 },
{ }
};
MODULE_DEVICE_TABLE(spi, adis16480_ids);
@@ -1023,6 +1114,12 @@ static const struct of_device_id adis16480_of_match[] = {
{ .compatible = "adi,adis16480" },
{ .compatible = "adi,adis16485" },
{ .compatible = "adi,adis16488" },
+ { .compatible = "adi,adis16495-1" },
+ { .compatible = "adi,adis16495-2" },
+ { .compatible = "adi,adis16495-3" },
+ { .compatible = "adi,adis16497-1" },
+ { .compatible = "adi,adis16497-2" },
+ { .compatible = "adi,adis16497-3" },
{ },
};
MODULE_DEVICE_TABLE(of, adis16480_of_match);
--
2.7.4
next prev parent reply other threads:[~2019-02-27 16:16 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-02-27 16:14 [PATCH v3 0/7] iio: imu: adis16480: Add support for ADIS1649x family of devices Stefan Popa
2019-02-27 16:14 ` [PATCH v3 1/7] iio: imu: adis16480: Add support for configurable drdy indicator Stefan Popa
2019-03-03 12:46 ` Jonathan Cameron
2019-02-27 16:14 ` [PATCH v3 2/7] iio: imu: adis16480: Add OF device ID table Stefan Popa
2019-03-03 12:46 ` Jonathan Cameron
2019-02-27 16:14 ` [PATCH v3 3/7] iio: imu: adis16480: Treat temperature scale in a generic way Stefan Popa
2019-03-03 12:47 ` Jonathan Cameron
2019-02-27 16:14 ` [PATCH v3 4/7] iio: imu: adis16480: Calculate the sampling frequency " Stefan Popa
2019-03-03 12:51 ` Jonathan Cameron
2019-02-27 16:14 ` [PATCH v3 5/7] iio: imu: adis16480: Deal with filter freq " Stefan Popa
2019-03-03 12:52 ` Jonathan Cameron
2019-02-27 16:14 ` Stefan Popa [this message]
2019-03-03 12:53 ` [PATCH v3 6/7] iio: imu: adis16480: Add support for ADIS1649x family of devices Jonathan Cameron
2019-02-27 16:14 ` [PATCH v3 7/7] iio: imu: adis16480: Add docs for ADIS16480 IMU Stefan Popa
2019-03-03 12:54 ` Jonathan Cameron
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1551284068-4882-7-git-send-email-stefan.popa@analog.com \
--to=stefan.popa@analog.com \
--cc=Michael.Hennerich@analog.com \
--cc=devicetree@vger.kernel.org \
--cc=gregkh@linuxfoundation.org \
--cc=jic23@kernel.org \
--cc=knaack.h@gmx.de \
--cc=lars@metafoo.de \
--cc=linux-iio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=pmeerw@pmeerw.net \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).