* [PATCH v1 0/2] add cec pins muxing
@ 2019-03-29 12:41 Yannick Fertré
2019-03-29 12:41 ` [PATCH v1 1/2] ARM: dts: stm32: add cec pins muxing on stm32mp157 Yannick Fertré
` (2 more replies)
0 siblings, 3 replies; 4+ messages in thread
From: Yannick Fertré @ 2019-03-29 12:41 UTC (permalink / raw)
To: Maxime Coquelin, Alexandre Torgue, Rob Herring, Mark Rutland,
linux-stm32, linux-arm-kernel, devicetree, linux-kernel,
Benjamin Gaignard, Yannick Fertre, Philippe Cornu
Add cec pins muxing
Yannick Fertré (2):
ARM: dts: stm32: add cec pins muxing on stm32mp157
ARM: dts: stm32: add sleep pinctrl for cec on stm32mp157c
arch/arm/boot/dts/stm32mp157-pinctrl.dtsi | 21 +++++++++++++++++++++
1 file changed, 21 insertions(+)
--
2.7.4
^ permalink raw reply [flat|nested] 4+ messages in thread
* [PATCH v1 1/2] ARM: dts: stm32: add cec pins muxing on stm32mp157
2019-03-29 12:41 [PATCH v1 0/2] add cec pins muxing Yannick Fertré
@ 2019-03-29 12:41 ` Yannick Fertré
2019-03-29 12:41 ` [PATCH v1 2/2] ARM: dts: stm32: add sleep pinctrl for cec on stm32mp157c Yannick Fertré
2019-04-10 14:08 ` [PATCH v1 0/2] add cec pins muxing Alexandre Torgue
2 siblings, 0 replies; 4+ messages in thread
From: Yannick Fertré @ 2019-03-29 12:41 UTC (permalink / raw)
To: Maxime Coquelin, Alexandre Torgue, Rob Herring, Mark Rutland,
linux-stm32, linux-arm-kernel, devicetree, linux-kernel,
Benjamin Gaignard, Yannick Fertre, Philippe Cornu
Add a new pin muxing for cec.
Signed-off-by: Yannick Fertré <yannick.fertre@st.com>
---
arch/arm/boot/dts/stm32mp157-pinctrl.dtsi | 9 +++++++++
1 file changed, 9 insertions(+)
diff --git a/arch/arm/boot/dts/stm32mp157-pinctrl.dtsi b/arch/arm/boot/dts/stm32mp157-pinctrl.dtsi
index 9104896..54fe2ad 100644
--- a/arch/arm/boot/dts/stm32mp157-pinctrl.dtsi
+++ b/arch/arm/boot/dts/stm32mp157-pinctrl.dtsi
@@ -157,6 +157,15 @@
};
};
+ cec_pins_b: cec-1 {
+ pins {
+ pinmux = <STM32_PINMUX('B', 6, AF5)>;
+ bias-disable;
+ drive-open-drain;
+ slew-rate = <0>;
+ };
+ };
+
ethernet0_rgmii_pins_a: rgmii-0 {
pins1 {
pinmux = <STM32_PINMUX('G', 5, AF11)>, /* ETH_RGMII_CLK125 */
--
2.7.4
^ permalink raw reply related [flat|nested] 4+ messages in thread
* [PATCH v1 2/2] ARM: dts: stm32: add sleep pinctrl for cec on stm32mp157c
2019-03-29 12:41 [PATCH v1 0/2] add cec pins muxing Yannick Fertré
2019-03-29 12:41 ` [PATCH v1 1/2] ARM: dts: stm32: add cec pins muxing on stm32mp157 Yannick Fertré
@ 2019-03-29 12:41 ` Yannick Fertré
2019-04-10 14:08 ` [PATCH v1 0/2] add cec pins muxing Alexandre Torgue
2 siblings, 0 replies; 4+ messages in thread
From: Yannick Fertré @ 2019-03-29 12:41 UTC (permalink / raw)
To: Maxime Coquelin, Alexandre Torgue, Rob Herring, Mark Rutland,
linux-stm32, linux-arm-kernel, devicetree, linux-kernel,
Benjamin Gaignard, Yannick Fertre, Philippe Cornu
Add sleep pinctrl for cec on stm32mp157c
Signed-off-by: Yannick Fertré <yannick.fertre@st.com>
---
arch/arm/boot/dts/stm32mp157-pinctrl.dtsi | 12 ++++++++++++
1 file changed, 12 insertions(+)
diff --git a/arch/arm/boot/dts/stm32mp157-pinctrl.dtsi b/arch/arm/boot/dts/stm32mp157-pinctrl.dtsi
index 54fe2ad..4886a89 100644
--- a/arch/arm/boot/dts/stm32mp157-pinctrl.dtsi
+++ b/arch/arm/boot/dts/stm32mp157-pinctrl.dtsi
@@ -157,6 +157,12 @@
};
};
+ cec_pins_sleep_a: cec-sleep-0 {
+ pins {
+ pinmux = <STM32_PINMUX('A', 15, ANALOG)>; /* HDMI_CEC */
+ };
+ };
+
cec_pins_b: cec-1 {
pins {
pinmux = <STM32_PINMUX('B', 6, AF5)>;
@@ -166,6 +172,12 @@
};
};
+ cec_pins_sleep_b: cec-sleep-1 {
+ pins {
+ pinmux = <STM32_PINMUX('B', 6, ANALOG)>; /* HDMI_CEC */
+ };
+ };
+
ethernet0_rgmii_pins_a: rgmii-0 {
pins1 {
pinmux = <STM32_PINMUX('G', 5, AF11)>, /* ETH_RGMII_CLK125 */
--
2.7.4
^ permalink raw reply related [flat|nested] 4+ messages in thread
* Re: [PATCH v1 0/2] add cec pins muxing
2019-03-29 12:41 [PATCH v1 0/2] add cec pins muxing Yannick Fertré
2019-03-29 12:41 ` [PATCH v1 1/2] ARM: dts: stm32: add cec pins muxing on stm32mp157 Yannick Fertré
2019-03-29 12:41 ` [PATCH v1 2/2] ARM: dts: stm32: add sleep pinctrl for cec on stm32mp157c Yannick Fertré
@ 2019-04-10 14:08 ` Alexandre Torgue
2 siblings, 0 replies; 4+ messages in thread
From: Alexandre Torgue @ 2019-04-10 14:08 UTC (permalink / raw)
To: Yannick Fertré,
Maxime Coquelin, Rob Herring, Mark Rutland, linux-stm32,
linux-arm-kernel, devicetree, linux-kernel, Benjamin Gaignard,
Philippe Cornu
Hi Yannick
On 3/29/19 1:41 PM, Yannick Fertré wrote:
> Add cec pins muxing
>
> Yannick Fertré (2):
> ARM: dts: stm32: add cec pins muxing on stm32mp157
> ARM: dts: stm32: add sleep pinctrl for cec on stm32mp157c
>
> arch/arm/boot/dts/stm32mp157-pinctrl.dtsi | 21 +++++++++++++++++++++
> 1 file changed, 21 insertions(+)
>
Series applied on stm32-next. Note that I squashed the both patches
as they deal only with pins muxing group definition.
Regards
Alex
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2019-04-10 14:10 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-03-29 12:41 [PATCH v1 0/2] add cec pins muxing Yannick Fertré
2019-03-29 12:41 ` [PATCH v1 1/2] ARM: dts: stm32: add cec pins muxing on stm32mp157 Yannick Fertré
2019-03-29 12:41 ` [PATCH v1 2/2] ARM: dts: stm32: add sleep pinctrl for cec on stm32mp157c Yannick Fertré
2019-04-10 14:08 ` [PATCH v1 0/2] add cec pins muxing Alexandre Torgue
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).