[PATCH v3 0/2] clk: renesas: r9a06g032: Add clock domain support

[PATCH v3 0/2] clk: renesas: r9a06g032: Add clock domain support

[Gareth Williams]

There are several clocks on the r9ag032 which are currently not enabled
in their drivers that can be delegated to clock domain system for power
management. Therefore add support for clock domain functionality to the
r9a06g032 clock driver after updating the relevant dt-bindings file.

Gareth Williams (2):
  dt-bindings: clock: renesas,r9a06g032-sysctrl: Document power Domains
  clk: renesas: r9a06g032: Add clock domain support

 .../bindings/clock/renesas,r9a06g032-sysctrl.txt   |   3 +
 drivers/clk/renesas/r9a06g032-clocks.c             | 229 ++++++++++++++-------
 2 files changed, 163 insertions(+), 69 deletions(-)

-- 
2.7.4

[PATCH v3 1/2] dt-bindings: clock: renesas,r9a06g032-sysctrl: Document power Domains

[Gareth Williams]

The driver is gaining power domain support, so add the new property
to the DT binding and update the examples.

Signed-off-by: Gareth Williams <gareth.williams.jx@renesas.com>
---
 Documentation/devicetree/bindings/clock/renesas,r9a06g032-sysctrl.txt | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/Documentation/devicetree/bindings/clock/renesas,r9a06g032-sysctrl.txt b/Documentation/devicetree/bindings/clock/renesas,r9a06g032-sysctrl.txt
index d60b997..6c706cd 100644
--- a/Documentation/devicetree/bindings/clock/renesas,r9a06g032-sysctrl.txt
+++ b/Documentation/devicetree/bindings/clock/renesas,r9a06g032-sysctrl.txt
@@ -13,6 +13,7 @@ Required Properties:
 	- external (optional) RGMII_REFCLK
   - clock-names: Must be:
         clock-names = "mclk", "rtc", "jtag", "rgmii_ref_ext";
+  - #power-domain-cells : Must be 0
 
 Examples
 --------
@@ -27,6 +28,7 @@ Examples
 		clocks = <&ext_mclk>, <&ext_rtc_clk>,
 				<&ext_jtag_clk>, <&ext_rgmii_ref>;
 		clock-names = "mclk", "rtc", "jtag", "rgmii_ref_ext";
+		#power-domain-cells = <0>;
 	};
 
   - Other nodes can use the clocks provided by SYSCTRL as in:
@@ -40,4 +42,5 @@ Examples
 		reg-io-width = <4>;
 		clocks = <&sysctrl R9A06G032_CLK_UART0>;
 		clock-names = "baudclk";
+		power-domains = <&sysctrl>;
 	};
-- 
2.7.4

[PATCH v3 2/2] clk: renesas: r9a06g032: Add clock domain support

[Gareth Williams]

There are several clocks on the r9ag032 which are currently not enabled
in their drivers that can be delegated to clock domain system for power
management. Therefore add support for clock domain functionality to the
r9a06g032 clock driver.

Signed-off-by: Gareth Williams <gareth.williams.jx@renesas.com>
---
 drivers/clk/renesas/r9a06g032-clocks.c | 229 +++++++++++++++++++++++----------
 1 file changed, 160 insertions(+), 69 deletions(-)

diff --git a/drivers/clk/renesas/r9a06g032-clocks.c b/drivers/clk/renesas/r9a06g032-clocks.c
index 97c7247..06799cd 100644
--- a/drivers/clk/renesas/r9a06g032-clocks.c
+++ b/drivers/clk/renesas/r9a06g032-clocks.c
@@ -16,6 +16,8 @@
 #include <linux/of.h>
 #include <linux/of_address.h>
 #include <linux/platform_device.h>
+#include <linux/pm_clock.h>
+#include <linux/pm_domain.h>
 #include <linux/slab.h>
 #include <linux/spinlock.h>
 #include <dt-bindings/clock/r9a06g032-sysctrl.h>
@@ -28,6 +30,7 @@ struct r9a06g032_gate {
 /* This is used to describe a clock for instantiation */
 struct r9a06g032_clkdesc {
 	const char *name;
+	uint32_t managed: 1;
 	uint32_t type: 3;
 	uint32_t index: 8;
 	uint32_t source : 8; /* source index + 1 (0 == none) */
@@ -60,7 +63,11 @@ struct r9a06g032_clkdesc {
 #define D_GATE(_idx, _n, _src, ...) \
 	{ .type = K_GATE, .index = R9A06G032_##_idx, \
 		.source = 1 + R9A06G032_##_src, .name = _n, \
-		.gate = I_GATE(__VA_ARGS__), }
+		.gate = I_GATE(__VA_ARGS__) }
+#define D_MODULE(_idx, _n, _src, ...) \
+	{ .type = K_GATE, .index = R9A06G032_##_idx, \
+		.source = 1 + R9A06G032_##_src, .name = _n, \
+		.managed = 1, .gate = I_GATE(__VA_ARGS__) }
 #define D_ROOT(_idx, _n, _mul, _div) \
 	{ .type = K_FFC, .index = R9A06G032_##_idx, .name = _n, \
 		.div = _div, .mul = _mul }
@@ -121,7 +128,7 @@ enum { K_GATE = 0, K_FFC, K_DIV, K_BITSEL, K_DUALGATE };
 
 #define R9A06G032_CLOCK_COUNT		(R9A06G032_UART_GROUP_34567 + 1)
 
-static const struct r9a06g032_clkdesc r9a06g032_clocks[] __initconst = {
+static const struct r9a06g032_clkdesc r9a06g032_clocks[] = {
 	D_ROOT(CLKOUT, "clkout", 25, 1),
 	D_ROOT(CLK_PLL_USB, "clk_pll_usb", 12, 10),
 	D_FFC(CLKOUT_D10, "clkout_d10", CLKOUT, 10),
@@ -170,7 +177,7 @@ static const struct r9a06g032_clkdesc r9a06g032_clocks[] __initconst = {
 	D_GATE(CLK_P6_PG2, "clk_p6_pg2", DIV_P6_PG, 0x8a3, 0x8a4, 0x8a5, 0, 0xb61, 0, 0),
 	D_GATE(CLK_P6_PG3, "clk_p6_pg3", DIV_P6_PG, 0x8a6, 0x8a7, 0x8a8, 0, 0xb62, 0, 0),
 	D_GATE(CLK_P6_PG4, "clk_p6_pg4", DIV_P6_PG, 0x8a9, 0x8aa, 0x8ab, 0, 0xb63, 0, 0),
-	D_GATE(CLK_PCI_USB, "clk_pci_usb", CLKOUT_D40, 0xe6, 0, 0, 0, 0, 0, 0),
+	D_MODULE(CLK_PCI_USB, "clk_pci_usb", CLKOUT_D40, 0xe6, 0, 0, 0, 0, 0, 0),
 	D_GATE(CLK_QSPI0, "clk_qspi0", DIV_QSPI0, 0x2a4, 0x2a5, 0, 0, 0, 0, 0),
 	D_GATE(CLK_QSPI1, "clk_qspi1", DIV_QSPI1, 0x484, 0x485, 0, 0, 0, 0, 0),
 	D_GATE(CLK_RGMII_REF, "clk_rgmii_ref", CLKOUT_D8, 0x340, 0, 0, 0, 0, 0, 0),
@@ -187,17 +194,17 @@ static const struct r9a06g032_clkdesc r9a06g032_clocks[] __initconst = {
 	D_GATE(CLK_SPI5, "clk_spi5", DIV_P4_PG, 0x822, 0x823, 0, 0, 0, 0, 0),
 	D_GATE(CLK_SWITCH, "clk_switch", DIV_SWITCH, 0x982, 0x983, 0, 0, 0, 0, 0),
 	D_DIV(DIV_MOTOR, "div_motor", CLKOUT_D5, 84, 2, 8),
-	D_GATE(HCLK_ECAT125, "hclk_ecat125", CLKOUT_D8, 0x400, 0x401, 0, 0x402, 0, 0x440, 0x441),
-	D_GATE(HCLK_PINCONFIG, "hclk_pinconfig", CLKOUT_D40, 0x740, 0x741, 0x742, 0, 0xae0, 0, 0),
-	D_GATE(HCLK_SERCOS, "hclk_sercos", CLKOUT_D10, 0x420, 0x422, 0, 0x421, 0, 0x460, 0x461),
-	D_GATE(HCLK_SGPIO2, "hclk_sgpio2", DIV_P5_PG, 0x8c3, 0x8c4, 0x8c5, 0, 0xb41, 0, 0),
-	D_GATE(HCLK_SGPIO3, "hclk_sgpio3", DIV_P5_PG, 0x8c6, 0x8c7, 0x8c8, 0, 0xb42, 0, 0),
-	D_GATE(HCLK_SGPIO4, "hclk_sgpio4", DIV_P5_PG, 0x8c9, 0x8ca, 0x8cb, 0, 0xb43, 0, 0),
-	D_GATE(HCLK_TIMER0, "hclk_timer0", CLKOUT_D40, 0x743, 0x744, 0x745, 0, 0xae1, 0, 0),
-	D_GATE(HCLK_TIMER1, "hclk_timer1", CLKOUT_D40, 0x746, 0x747, 0x748, 0, 0xae2, 0, 0),
-	D_GATE(HCLK_USBF, "hclk_usbf", CLKOUT_D8, 0xe3, 0, 0, 0xe4, 0, 0x102, 0x103),
-	D_GATE(HCLK_USBH, "hclk_usbh", CLKOUT_D8, 0xe0, 0xe1, 0, 0xe2, 0, 0x100, 0x101),
-	D_GATE(HCLK_USBPM, "hclk_usbpm", CLKOUT_D8, 0xe5, 0, 0, 0, 0, 0, 0),
+	D_MODULE(HCLK_ECAT125, "hclk_ecat125", CLKOUT_D8, 0x400, 0x401, 0, 0x402, 0, 0x440, 0x441),
+	D_MODULE(HCLK_PINCONFIG, "hclk_pinconfig", CLKOUT_D40, 0x740, 0x741, 0x742, 0, 0xae0, 0, 0),
+	D_MODULE(HCLK_SERCOS, "hclk_sercos", CLKOUT_D10, 0x420, 0x422, 0, 0x421, 0, 0x460, 0x461),
+	D_MODULE(HCLK_SGPIO2, "hclk_sgpio2", DIV_P5_PG, 0x8c3, 0x8c4, 0x8c5, 0, 0xb41, 0, 0),
+	D_MODULE(HCLK_SGPIO3, "hclk_sgpio3", DIV_P5_PG, 0x8c6, 0x8c7, 0x8c8, 0, 0xb42, 0, 0),
+	D_MODULE(HCLK_SGPIO4, "hclk_sgpio4", DIV_P5_PG, 0x8c9, 0x8ca, 0x8cb, 0, 0xb43, 0, 0),
+	D_MODULE(HCLK_TIMER0, "hclk_timer0", CLKOUT_D40, 0x743, 0x744, 0x745, 0, 0xae1, 0, 0),
+	D_MODULE(HCLK_TIMER1, "hclk_timer1", CLKOUT_D40, 0x746, 0x747, 0x748, 0, 0xae2, 0, 0),
+	D_MODULE(HCLK_USBF, "hclk_usbf", CLKOUT_D8, 0xe3, 0, 0, 0xe4, 0, 0x102, 0x103),
+	D_MODULE(HCLK_USBH, "hclk_usbh", CLKOUT_D8, 0xe0, 0xe1, 0, 0xe2, 0, 0x100, 0x101),
+	D_MODULE(HCLK_USBPM, "hclk_usbpm", CLKOUT_D8, 0xe5, 0, 0, 0, 0, 0, 0),
 	D_GATE(CLK_48_PG_F, "clk_48_pg_f", CLK_48, 0x78c, 0x78d, 0, 0x78e, 0, 0xb04, 0xb05),
 	D_GATE(CLK_48_PG4, "clk_48_pg4", CLK_48, 0x789, 0x78a, 0x78b, 0, 0xb03, 0, 0),
 	D_FFC(CLK_DDRPHY_PLLCLK_D4, "clk_ddrphy_pllclk_d4", CLK_DDRPHY_PLLCLK, 4),
@@ -207,13 +214,13 @@ static const struct r9a06g032_clkdesc r9a06g032_clocks[] __initconst = {
 	D_FFC(CLK_REF_SYNC_D8, "clk_ref_sync_d8", CLK_REF_SYNC, 8),
 	D_FFC(CLK_SERCOS100_D2, "clk_sercos100_d2", CLK_SERCOS100, 2),
 	D_DIV(DIV_CA7, "div_ca7", CLK_REF_SYNC, 57, 1, 4, 1, 2, 4),
-	D_GATE(HCLK_CAN0, "hclk_can0", CLK_48, 0x783, 0x784, 0x785, 0, 0xb01, 0, 0),
-	D_GATE(HCLK_CAN1, "hclk_can1", CLK_48, 0x786, 0x787, 0x788, 0, 0xb02, 0, 0),
-	D_GATE(HCLK_DELTASIGMA, "hclk_deltasigma", DIV_MOTOR, 0x1ef, 0x1f0, 0x1f1, 0, 0, 0, 0),
-	D_GATE(HCLK_PWMPTO, "hclk_pwmpto", DIV_MOTOR, 0x1ec, 0x1ed, 0x1ee, 0, 0, 0, 0),
-	D_GATE(HCLK_RSV, "hclk_rsv", CLK_48, 0x780, 0x781, 0x782, 0, 0xb00, 0, 0),
-	D_GATE(HCLK_SGPIO0, "hclk_sgpio0", DIV_MOTOR, 0x1e0, 0x1e1, 0x1e2, 0, 0, 0, 0),
-	D_GATE(HCLK_SGPIO1, "hclk_sgpio1", DIV_MOTOR, 0x1e3, 0x1e4, 0x1e5, 0, 0, 0, 0),
+	D_MODULE(HCLK_CAN0, "hclk_can0", CLK_48, 0x783, 0x784, 0x785, 0, 0xb01, 0, 0),
+	D_MODULE(HCLK_CAN1, "hclk_can1", CLK_48, 0x786, 0x787, 0x788, 0, 0xb02, 0, 0),
+	D_MODULE(HCLK_DELTASIGMA, "hclk_deltasigma", DIV_MOTOR, 0x1ef, 0x1f0, 0x1f1, 0, 0, 0, 0),
+	D_MODULE(HCLK_PWMPTO, "hclk_pwmpto", DIV_MOTOR, 0x1ec, 0x1ed, 0x1ee, 0, 0, 0, 0),
+	D_MODULE(HCLK_RSV, "hclk_rsv", CLK_48, 0x780, 0x781, 0x782, 0, 0xb00, 0, 0),
+	D_MODULE(HCLK_SGPIO0, "hclk_sgpio0", DIV_MOTOR, 0x1e0, 0x1e1, 0x1e2, 0, 0, 0, 0),
+	D_MODULE(HCLK_SGPIO1, "hclk_sgpio1", DIV_MOTOR, 0x1e3, 0x1e4, 0x1e5, 0, 0, 0, 0),
 	D_DIV(RTOS_MDC, "rtos_mdc", CLK_REF_SYNC, 100, 80, 640, 80, 160, 320, 640),
 	D_GATE(CLK_CM3, "clk_cm3", CLK_REF_SYNC_D4, 0xba0, 0xba1, 0, 0xba2, 0, 0xbc0, 0xbc1),
 	D_GATE(CLK_DDRC, "clk_ddrc", CLK_DDRPHY_PLLCLK_D4, 0x323, 0x324, 0, 0, 0, 0, 0),
@@ -221,53 +228,53 @@ static const struct r9a06g032_clkdesc r9a06g032_clocks[] __initconst = {
 	D_GATE(CLK_HSR50, "clk_hsr50", CLK_HSR100_D2, 0x484, 0x485, 0, 0, 0, 0, 0),
 	D_GATE(CLK_HW_RTOS, "clk_hw_rtos", CLK_REF_SYNC_D4, 0xc60, 0xc61, 0, 0, 0, 0, 0),
 	D_GATE(CLK_SERCOS50, "clk_sercos50", CLK_SERCOS100_D2, 0x424, 0x423, 0, 0, 0, 0, 0),
-	D_GATE(HCLK_ADC, "hclk_adc", CLK_REF_SYNC_D8, 0x1af, 0x1b0, 0x1b1, 0, 0, 0, 0),
-	D_GATE(HCLK_CM3, "hclk_cm3", CLK_REF_SYNC_D4, 0xc20, 0xc21, 0xc22, 0, 0, 0, 0),
-	D_GATE(HCLK_CRYPTO_EIP150, "hclk_crypto_eip150", CLK_REF_SYNC_D4, 0x123, 0x124, 0x125, 0, 0x142, 0, 0),
-	D_GATE(HCLK_CRYPTO_EIP93, "hclk_crypto_eip93", CLK_REF_SYNC_D4, 0x120, 0x121, 0, 0x122, 0, 0x140, 0x141),
-	D_GATE(HCLK_DDRC, "hclk_ddrc", CLK_REF_SYNC_D4, 0x320, 0x322, 0, 0x321, 0, 0x3a0, 0x3a1),
-	D_GATE(HCLK_DMA0, "hclk_dma0", CLK_REF_SYNC_D4, 0x260, 0x261, 0x262, 0x263, 0x2c0, 0x2c1, 0x2c2),
-	D_GATE(HCLK_DMA1, "hclk_dma1", CLK_REF_SYNC_D4, 0x264, 0x265, 0x266, 0x267, 0x2c3, 0x2c4, 0x2c5),
-	D_GATE(HCLK_GMAC0, "hclk_gmac0", CLK_REF_SYNC_D4, 0x360, 0x361, 0x362, 0x363, 0x3c0, 0x3c1, 0x3c2),
-	D_GATE(HCLK_GMAC1, "hclk_gmac1", CLK_REF_SYNC_D4, 0x380, 0x381, 0x382, 0x383, 0x3e0, 0x3e1, 0x3e2),
-	D_GATE(HCLK_GPIO0, "hclk_gpio0", CLK_REF_SYNC_D4, 0x212, 0x213, 0x214, 0, 0, 0, 0),
-	D_GATE(HCLK_GPIO1, "hclk_gpio1", CLK_REF_SYNC_D4, 0x215, 0x216, 0x217, 0, 0, 0, 0),
-	D_GATE(HCLK_GPIO2, "hclk_gpio2", CLK_REF_SYNC_D4, 0x229, 0x22a, 0x22b, 0, 0, 0, 0),
-	D_GATE(HCLK_HSR, "hclk_hsr", CLK_HSR100_D2, 0x480, 0x482, 0, 0x481, 0, 0x4c0, 0x4c1),
-	D_GATE(HCLK_I2C0, "hclk_i2c0", CLK_REF_SYNC_D8, 0x1a9, 0x1aa, 0x1ab, 0, 0, 0, 0),
-	D_GATE(HCLK_I2C1, "hclk_i2c1", CLK_REF_SYNC_D8, 0x1ac, 0x1ad, 0x1ae, 0, 0, 0, 0),
-	D_GATE(HCLK_LCD, "hclk_lcd", CLK_REF_SYNC_D4, 0x7a0, 0x7a1, 0x7a2, 0, 0xb20, 0, 0),
-	D_GATE(HCLK_MSEBI_M, "hclk_msebi_m", CLK_REF_SYNC_D4, 0x164, 0x165, 0x166, 0, 0x183, 0, 0),
-	D_GATE(HCLK_MSEBI_S, "hclk_msebi_s", CLK_REF_SYNC_D4, 0x160, 0x161, 0x162, 0x163, 0x180, 0x181, 0x182),
-	D_GATE(HCLK_NAND, "hclk_nand", CLK_REF_SYNC_D4, 0x280, 0x281, 0x282, 0x283, 0x2e0, 0x2e1, 0x2e2),
-	D_GATE(HCLK_PG_I, "hclk_pg_i", CLK_REF_SYNC_D4, 0x7ac, 0x7ad, 0, 0x7ae, 0, 0xb24, 0xb25),
-	D_GATE(HCLK_PG19, "hclk_pg19", CLK_REF_SYNC_D4, 0x22c, 0x22d, 0x22e, 0, 0, 0, 0),
-	D_GATE(HCLK_PG20, "hclk_pg20", CLK_REF_SYNC_D4, 0x22f, 0x230, 0x231, 0, 0, 0, 0),
-	D_GATE(HCLK_PG3, "hclk_pg3", CLK_REF_SYNC_D4, 0x7a6, 0x7a7, 0x7a8, 0, 0xb22, 0, 0),
-	D_GATE(HCLK_PG4, "hclk_pg4", CLK_REF_SYNC_D4, 0x7a9, 0x7aa, 0x7ab, 0, 0xb23, 0, 0),
-	D_GATE(HCLK_QSPI0, "hclk_qspi0", CLK_REF_SYNC_D4, 0x2a0, 0x2a1, 0x2a2, 0x2a3, 0x300, 0x301, 0x302),
-	D_GATE(HCLK_QSPI1, "hclk_qspi1", CLK_REF_SYNC_D4, 0x480, 0x481, 0x482, 0x483, 0x4c0, 0x4c1, 0x4c2),
-	D_GATE(HCLK_ROM, "hclk_rom", CLK_REF_SYNC_D4, 0xaa0, 0xaa1, 0xaa2, 0, 0xb80, 0, 0),
-	D_GATE(HCLK_RTC, "hclk_rtc", CLK_REF_SYNC_D8, 0xa00, 0, 0, 0, 0, 0, 0),
-	D_GATE(HCLK_SDIO0, "hclk_sdio0", CLK_REF_SYNC_D4, 0x60, 0x61, 0x62, 0x63, 0x80, 0x81, 0x82),
-	D_GATE(HCLK_SDIO1, "hclk_sdio1", CLK_REF_SYNC_D4, 0x640, 0x641, 0x642, 0x643, 0x660, 0x661, 0x662),
-	D_GATE(HCLK_SEMAP, "hclk_semap", CLK_REF_SYNC_D4, 0x7a3, 0x7a4, 0x7a5, 0, 0xb21, 0, 0),
-	D_GATE(HCLK_SPI0, "hclk_spi0", CLK_REF_SYNC_D4, 0x200, 0x201, 0x202, 0, 0, 0, 0),
-	D_GATE(HCLK_SPI1, "hclk_spi1", CLK_REF_SYNC_D4, 0x203, 0x204, 0x205, 0, 0, 0, 0),
-	D_GATE(HCLK_SPI2, "hclk_spi2", CLK_REF_SYNC_D4, 0x206, 0x207, 0x208, 0, 0, 0, 0),
-	D_GATE(HCLK_SPI3, "hclk_spi3", CLK_REF_SYNC_D4, 0x209, 0x20a, 0x20b, 0, 0, 0, 0),
-	D_GATE(HCLK_SPI4, "hclk_spi4", CLK_REF_SYNC_D4, 0x20c, 0x20d, 0x20e, 0, 0, 0, 0),
-	D_GATE(HCLK_SPI5, "hclk_spi5", CLK_REF_SYNC_D4, 0x20f, 0x210, 0x211, 0, 0, 0, 0),
-	D_GATE(HCLK_SWITCH, "hclk_switch", CLK_REF_SYNC_D4, 0x980, 0, 0x981, 0, 0, 0, 0),
-	D_GATE(HCLK_SWITCH_RG, "hclk_switch_rg", CLK_REF_SYNC_D4, 0xc40, 0xc41, 0xc42, 0, 0, 0, 0),
-	D_GATE(HCLK_UART0, "hclk_uart0", CLK_REF_SYNC_D8, 0x1a0, 0x1a1, 0x1a2, 0, 0, 0, 0),
-	D_GATE(HCLK_UART1, "hclk_uart1", CLK_REF_SYNC_D8, 0x1a3, 0x1a4, 0x1a5, 0, 0, 0, 0),
-	D_GATE(HCLK_UART2, "hclk_uart2", CLK_REF_SYNC_D8, 0x1a6, 0x1a7, 0x1a8, 0, 0, 0, 0),
-	D_GATE(HCLK_UART3, "hclk_uart3", CLK_REF_SYNC_D4, 0x218, 0x219, 0x21a, 0, 0, 0, 0),
-	D_GATE(HCLK_UART4, "hclk_uart4", CLK_REF_SYNC_D4, 0x21b, 0x21c, 0x21d, 0, 0, 0, 0),
-	D_GATE(HCLK_UART5, "hclk_uart5", CLK_REF_SYNC_D4, 0x220, 0x221, 0x222, 0, 0, 0, 0),
-	D_GATE(HCLK_UART6, "hclk_uart6", CLK_REF_SYNC_D4, 0x223, 0x224, 0x225, 0, 0, 0, 0),
-	D_GATE(HCLK_UART7, "hclk_uart7", CLK_REF_SYNC_D4, 0x226, 0x227, 0x228, 0, 0, 0, 0),
+	D_MODULE(HCLK_ADC, "hclk_adc", CLK_REF_SYNC_D8, 0x1af, 0x1b0, 0x1b1, 0, 0, 0, 0),
+	D_MODULE(HCLK_CM3, "hclk_cm3", CLK_REF_SYNC_D4, 0xc20, 0xc21, 0xc22, 0, 0, 0, 0),
+	D_MODULE(HCLK_CRYPTO_EIP150, "hclk_crypto_eip150", CLK_REF_SYNC_D4, 0x123, 0x124, 0x125, 0, 0x142, 0, 0),
+	D_MODULE(HCLK_CRYPTO_EIP93, "hclk_crypto_eip93", CLK_REF_SYNC_D4, 0x120, 0x121, 0, 0x122, 0, 0x140, 0x141),
+	D_MODULE(HCLK_DDRC, "hclk_ddrc", CLK_REF_SYNC_D4, 0x320, 0x322, 0, 0x321, 0, 0x3a0, 0x3a1),
+	D_MODULE(HCLK_DMA0, "hclk_dma0", CLK_REF_SYNC_D4, 0x260, 0x261, 0x262, 0x263, 0x2c0, 0x2c1, 0x2c2),
+	D_MODULE(HCLK_DMA1, "hclk_dma1", CLK_REF_SYNC_D4, 0x264, 0x265, 0x266, 0x267, 0x2c3, 0x2c4, 0x2c5),
+	D_MODULE(HCLK_GMAC0, "hclk_gmac0", CLK_REF_SYNC_D4, 0x360, 0x361, 0x362, 0x363, 0x3c0, 0x3c1, 0x3c2),
+	D_MODULE(HCLK_GMAC1, "hclk_gmac1", CLK_REF_SYNC_D4, 0x380, 0x381, 0x382, 0x383, 0x3e0, 0x3e1, 0x3e2),
+	D_MODULE(HCLK_GPIO0, "hclk_gpio0", CLK_REF_SYNC_D4, 0x212, 0x213, 0x214, 0, 0, 0, 0),
+	D_MODULE(HCLK_GPIO1, "hclk_gpio1", CLK_REF_SYNC_D4, 0x215, 0x216, 0x217, 0, 0, 0, 0),
+	D_MODULE(HCLK_GPIO2, "hclk_gpio2", CLK_REF_SYNC_D4, 0x229, 0x22a, 0x22b, 0, 0, 0, 0),
+	D_MODULE(HCLK_HSR, "hclk_hsr", CLK_HSR100_D2, 0x480, 0x482, 0, 0x481, 0, 0x4c0, 0x4c1),
+	D_MODULE(HCLK_I2C0, "hclk_i2c0", CLK_REF_SYNC_D8, 0x1a9, 0x1aa, 0x1ab, 0, 0, 0, 0),
+	D_MODULE(HCLK_I2C1, "hclk_i2c1", CLK_REF_SYNC_D8, 0x1ac, 0x1ad, 0x1ae, 0, 0, 0, 0),
+	D_MODULE(HCLK_LCD, "hclk_lcd", CLK_REF_SYNC_D4, 0x7a0, 0x7a1, 0x7a2, 0, 0xb20, 0, 0),
+	D_MODULE(HCLK_MSEBI_M, "hclk_msebi_m", CLK_REF_SYNC_D4, 0x164, 0x165, 0x166, 0, 0x183, 0, 0),
+	D_MODULE(HCLK_MSEBI_S, "hclk_msebi_s", CLK_REF_SYNC_D4, 0x160, 0x161, 0x162, 0x163, 0x180, 0x181, 0x182),
+	D_MODULE(HCLK_NAND, "hclk_nand", CLK_REF_SYNC_D4, 0x280, 0x281, 0x282, 0x283, 0x2e0, 0x2e1, 0x2e2),
+	D_MODULE(HCLK_PG_I, "hclk_pg_i", CLK_REF_SYNC_D4, 0x7ac, 0x7ad, 0, 0x7ae, 0, 0xb24, 0xb25),
+	D_MODULE(HCLK_PG19, "hclk_pg19", CLK_REF_SYNC_D4, 0x22c, 0x22d, 0x22e, 0, 0, 0, 0),
+	D_MODULE(HCLK_PG20, "hclk_pg20", CLK_REF_SYNC_D4, 0x22f, 0x230, 0x231, 0, 0, 0, 0),
+	D_MODULE(HCLK_PG3, "hclk_pg3", CLK_REF_SYNC_D4, 0x7a6, 0x7a7, 0x7a8, 0, 0xb22, 0, 0),
+	D_MODULE(HCLK_PG4, "hclk_pg4", CLK_REF_SYNC_D4, 0x7a9, 0x7aa, 0x7ab, 0, 0xb23, 0, 0),
+	D_MODULE(HCLK_QSPI0, "hclk_qspi0", CLK_REF_SYNC_D4, 0x2a0, 0x2a1, 0x2a2, 0x2a3, 0x300, 0x301, 0x302),
+	D_MODULE(HCLK_QSPI1, "hclk_qspi1", CLK_REF_SYNC_D4, 0x480, 0x481, 0x482, 0x483, 0x4c0, 0x4c1, 0x4c2),
+	D_MODULE(HCLK_ROM, "hclk_rom", CLK_REF_SYNC_D4, 0xaa0, 0xaa1, 0xaa2, 0, 0xb80, 0, 0),
+	D_MODULE(HCLK_RTC, "hclk_rtc", CLK_REF_SYNC_D8, 0xa00, 0, 0, 0, 0, 0, 0),
+	D_MODULE(HCLK_SDIO0, "hclk_sdio0", CLK_REF_SYNC_D4, 0x60, 0x61, 0x62, 0x63, 0x80, 0x81, 0x82),
+	D_MODULE(HCLK_SDIO1, "hclk_sdio1", CLK_REF_SYNC_D4, 0x640, 0x641, 0x642, 0x643, 0x660, 0x661, 0x662),
+	D_MODULE(HCLK_SEMAP, "hclk_semap", CLK_REF_SYNC_D4, 0x7a3, 0x7a4, 0x7a5, 0, 0xb21, 0, 0),
+	D_MODULE(HCLK_SPI0, "hclk_spi0", CLK_REF_SYNC_D4, 0x200, 0x201, 0x202, 0, 0, 0, 0),
+	D_MODULE(HCLK_SPI1, "hclk_spi1", CLK_REF_SYNC_D4, 0x203, 0x204, 0x205, 0, 0, 0, 0),
+	D_MODULE(HCLK_SPI2, "hclk_spi2", CLK_REF_SYNC_D4, 0x206, 0x207, 0x208, 0, 0, 0, 0),
+	D_MODULE(HCLK_SPI3, "hclk_spi3", CLK_REF_SYNC_D4, 0x209, 0x20a, 0x20b, 0, 0, 0, 0),
+	D_MODULE(HCLK_SPI4, "hclk_spi4", CLK_REF_SYNC_D4, 0x20c, 0x20d, 0x20e, 0, 0, 0, 0),
+	D_MODULE(HCLK_SPI5, "hclk_spi5", CLK_REF_SYNC_D4, 0x20f, 0x210, 0x211, 0, 0, 0, 0),
+	D_MODULE(HCLK_SWITCH, "hclk_switch", CLK_REF_SYNC_D4, 0x980, 0, 0x981, 0, 0, 0, 0),
+	D_MODULE(HCLK_SWITCH_RG, "hclk_switch_rg", CLK_REF_SYNC_D4, 0xc40, 0xc41, 0xc42, 0, 0, 0, 0),
+	D_MODULE(HCLK_UART0, "hclk_uart0", CLK_REF_SYNC_D8, 0x1a0, 0x1a1, 0x1a2, 0, 0, 0, 0),
+	D_MODULE(HCLK_UART1, "hclk_uart1", CLK_REF_SYNC_D8, 0x1a3, 0x1a4, 0x1a5, 0, 0, 0, 0),
+	D_MODULE(HCLK_UART2, "hclk_uart2", CLK_REF_SYNC_D8, 0x1a6, 0x1a7, 0x1a8, 0, 0, 0, 0),
+	D_MODULE(HCLK_UART3, "hclk_uart3", CLK_REF_SYNC_D4, 0x218, 0x219, 0x21a, 0, 0, 0, 0),
+	D_MODULE(HCLK_UART4, "hclk_uart4", CLK_REF_SYNC_D4, 0x21b, 0x21c, 0x21d, 0, 0, 0, 0),
+	D_MODULE(HCLK_UART5, "hclk_uart5", CLK_REF_SYNC_D4, 0x220, 0x221, 0x222, 0, 0, 0, 0),
+	D_MODULE(HCLK_UART6, "hclk_uart6", CLK_REF_SYNC_D4, 0x223, 0x224, 0x225, 0, 0, 0, 0),
+	D_MODULE(HCLK_UART7, "hclk_uart7", CLK_REF_SYNC_D4, 0x226, 0x227, 0x228, 0, 0, 0, 0),
 	/*
 	 * These are not hardware clocks, but are needed to handle the special
 	 * case where we have a 'selector bit' that doesn't just change the
@@ -344,6 +351,86 @@ struct r9a06g032_clk_gate {
 
 #define to_r9a06g032_gate(_hw) container_of(_hw, struct r9a06g032_clk_gate, hw)
 
+static int create_add_module_clock(struct of_phandle_args *clkspec,
+				   struct device *dev)
+{
+	struct clk *clk;
+	int error = 0;
+
+	clk = of_clk_get_from_provider(clkspec);
+	if (IS_ERR(clk))
+		return PTR_ERR(clk);
+
+	error = pm_clk_create(dev);
+	if (error) {
+		clk_put(clk);
+		return error;
+	}
+
+	error = pm_clk_add_clk(dev, clk);
+	if (error) {
+		pm_clk_destroy(dev);
+		clk_put(clk);
+	}
+
+	return error;
+}
+
+static int r9a06g032_attach_dev(struct generic_pm_domain *pd,
+				struct device *dev)
+{
+	struct device_node *np = dev->of_node;
+	struct of_phandle_args clkspec;
+	int i = 0;
+	int error;
+
+	while (!of_parse_phandle_with_args(np, "clocks", "#clock-cells", i,
+					   &clkspec)) {
+		int index;
+		if (clkspec.np != pd->dev.of_node)
+			continue;
+
+		index = clkspec.args[0];
+
+		if (index < R9A06G032_CLOCK_COUNT &&
+		    r9a06g032_clocks[index].managed) {
+			of_node_put(clkspec.np);
+
+			error = create_add_module_clock(&clkspec, dev);
+			if (error)
+				return error;
+		}
+		i++;
+	}
+
+	return 0;
+}
+
+static void r9a06g032_detach_dev(struct generic_pm_domain *unused, struct device *dev)
+{
+	if (!pm_clk_no_clocks(dev))
+		pm_clk_destroy(dev);
+}
+
+static int r9a06g032_add_clk_domain(struct device *dev)
+{
+	struct device_node *np = dev->of_node;
+	struct generic_pm_domain *pd;
+
+	pd = devm_kzalloc(dev, sizeof(*pd), GFP_KERNEL);
+	if (!pd)
+		return -ENOMEM;
+
+	pd->name = np->name;
+	pd->flags = GENPD_FLAG_PM_CLK | GENPD_FLAG_ACTIVE_WAKEUP;
+	pd->attach_dev = r9a06g032_attach_dev;
+	pd->detach_dev = r9a06g032_detach_dev;
+	pm_genpd_init(pd, &pm_domain_always_on_gov, false);
+
+	of_genpd_add_provider_simple(np, pd);
+	return 0;
+}
+
 static void
 r9a06g032_clk_gate_set(struct r9a06g032_priv *clocks,
 		       struct r9a06g032_gate *g, int on)
@@ -870,8 +957,12 @@ static int __init r9a06g032_clocks_probe(struct platform_device *pdev)
 	if (error)
 		return error;
 
-	return devm_add_action_or_reset(dev,
+	error = devm_add_action_or_reset(dev,
 					r9a06g032_clocks_del_clk_provider, np);
+	if (error)
+		return error;
+
+	return r9a06g032_add_clk_domain(dev);
 }
 
 static const struct of_device_id r9a06g032_match[] = {
-- 
2.7.4

Re: [PATCH v3 1/2] dt-bindings: clock: renesas,r9a06g032-sysctrl: Document power Domains

[Geert Uytterhoeven]

Hi Gareth,

On Fri, May 24, 2019 at 5:32 PM Gareth Williams
<gareth.williams.jx@renesas.com> wrote:
> The driver is gaining power domain support, so add the new property
> to the DT binding and update the examples.
>
> Signed-off-by: Gareth Williams <gareth.williams.jx@renesas.com>

Thanks for your patch!

> --- a/Documentation/devicetree/bindings/clock/renesas,r9a06g032-sysctrl.txt
> +++ b/Documentation/devicetree/bindings/clock/renesas,r9a06g032-sysctrl.txt
@@ -40,4 +42,5 @@ Examples
>                 reg-io-width = <4>;
>                 clocks = <&sysctrl R9A06G032_CLK_UART0>;
>                 clock-names = "baudclk";
> +               power-domains = <&sysctrl>;

This is an interesting example: according to the driver,
R9A06G032_CLK_UART0, is not clock used for power management?

Oh, the real uart0 node in arch/arm/boot/dts/r9a06g032.dtsi uses

    clocks = <&sysctrl R9A06G032_CLK_UART0>, <&sysctrl R9A06G032_HCLK_UART0>;
    clock-names = "baudclk", "apb_pclk";

That does make sense...

With the above fixed:
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>

Gr{oetje,eeting}s,

                        Geert


--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
                                -- Linus Torvalds

Re: [PATCH v3 2/2] clk: renesas: r9a06g032: Add clock domain support

[Geert Uytterhoeven]

Hi Gareth,

On Fri, May 24, 2019 at 5:32 PM Gareth Williams
<gareth.williams.jx@renesas.com> wrote:
> There are several clocks on the r9ag032 which are currently not enabled
> in their drivers that can be delegated to clock domain system for power
> management. Therefore add support for clock domain functionality to the
> r9a06g032 clock driver.
>
> Signed-off-by: Gareth Williams <gareth.williams.jx@renesas.com>

Thanks for the update!

> --- a/drivers/clk/renesas/r9a06g032-clocks.c
> +++ b/drivers/clk/renesas/r9a06g032-clocks.c

> @@ -344,6 +351,86 @@ struct r9a06g032_clk_gate {
>
>  #define to_r9a06g032_gate(_hw) container_of(_hw, struct r9a06g032_clk_gate, hw)
>
> +static int create_add_module_clock(struct of_phandle_args *clkspec,
> +                                  struct device *dev)
> +{
> +       struct clk *clk;
> +       int error = 0;

No need to initialize to 0.

> +
> +       clk = of_clk_get_from_provider(clkspec);
> +       if (IS_ERR(clk))
> +               return PTR_ERR(clk);
> +
> +       error = pm_clk_create(dev);

> +static int r9a06g032_attach_dev(struct generic_pm_domain *pd,
> +                               struct device *dev)
> +{
> +       struct device_node *np = dev->of_node;
> +       struct of_phandle_args clkspec;
> +       int i = 0;
> +       int error;
> +
> +       while (!of_parse_phandle_with_args(np, "clocks", "#clock-cells", i,
> +                                          &clkspec)) {
> +               int index;

scripts/checkpatch.pl says a blank line is missing.
Alternatively, you can move the declaration of index to the top of the
function, together with error and i.

> +               if (clkspec.np != pd->dev.of_node)
> +                       continue;
> +
> +               index = clkspec.args[0];
> +
> +               if (index < R9A06G032_CLOCK_COUNT &&
> +                   r9a06g032_clocks[index].managed) {
> +                       of_node_put(clkspec.np);

As the call below uses clkspec.np, the call to of_node_put() should be
after it, just before the error check.

> +
> +                       error = create_add_module_clock(&clkspec, dev);
> +                       if (error)
> +                               return error;
> +               }
> +               i++;
> +       }
> +
> +       return 0;
> +}

Gr{oetje,eeting}s,

                        Geert

-- 
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
                                -- Linus Torvalds

RE: [PATCH v3 1/2] dt-bindings: clock: renesas,r9a06g032-sysctrl: Document power Domains

[Phil Edworthy]

Hi Geert,

On 28 May 2019 08:29 Geert Uytterhoeven wrote:
> On Fri, May 24, 2019 at 5:32 PM Gareth Williams wrote:
> > The driver is gaining power domain support, so add the new property to
> > the DT binding and update the examples.
> >
> > Signed-off-by: Gareth Williams <gareth.williams.jx@renesas.com>
> 
> Thanks for your patch!
> 
> > ---
> > a/Documentation/devicetree/bindings/clock/renesas,r9a06g032-sysctrl.tx
> > t
> > +++ b/Documentation/devicetree/bindings/clock/renesas,r9a06g032-
> sysctr
> > +++ l.txt
> @@ -40,4 +42,5 @@ Examples
> >                 reg-io-width = <4>;
> >                 clocks = <&sysctrl R9A06G032_CLK_UART0>;
> >                 clock-names = "baudclk";
> > +               power-domains = <&sysctrl>;
> 
> This is an interesting example: according to the driver,
> R9A06G032_CLK_UART0, is not clock used for power management?
> 
> Oh, the real uart0 node in arch/arm/boot/dts/r9a06g032.dtsi uses
> 
>     clocks = <&sysctrl R9A06G032_CLK_UART0>, <&sysctrl
> R9A06G032_HCLK_UART0>;
>     clock-names = "baudclk", "apb_pclk";
> 
> That does make sense...
Note that the Synopsys DW uart driver already gets the "apb_pclk" clock, so
we don’t actually need to use clock domains to enable this clock.

This is also true for many of the peripheral drivers used on rzn1 (Synopsys
gpio controller, i2c controller, gmac, dmac, Arasan sdio controller). The
commit to add this clock to the i2c controller driver is my fault, as I was
following the pattern of the others.

Of the few drivers that don't already get the hclk/pclk used to access the
peripherals is the Synopsys spi controller (though that currently doesn’t
support runtime PM) and the USB Host controller.

BR
Phil
 
> With the above fixed:
> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
> 
> Gr{oetje,eeting}s,
> 
>                         Geert
> 
> 
> --
> Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-
> m68k.org
> 
> In personal conversations with technical people, I call myself a hacker. But
> when I'm talking to journalists I just say "programmer" or something like that.
>                                 -- Linus Torvalds

Re: [PATCH v3 1/2] dt-bindings: clock: renesas,r9a06g032-sysctrl: Document power Domains

[Geert Uytterhoeven]

Hi Phil,

On Mon, Jun 3, 2019 at 10:29 AM Phil Edworthy <phil.edworthy@renesas.com> wrote:
> On 28 May 2019 08:29 Geert Uytterhoeven wrote:
> > On Fri, May 24, 2019 at 5:32 PM Gareth Williams wrote:
> > > The driver is gaining power domain support, so add the new property to
> > > the DT binding and update the examples.
> > >
> > > Signed-off-by: Gareth Williams <gareth.williams.jx@renesas.com>

> > > ---
> > > a/Documentation/devicetree/bindings/clock/renesas,r9a06g032-sysctrl.txt
> > > +++ b/Documentation/devicetree/bindings/clock/renesas,r9a06g032-sysctrl.txt
> > @@ -40,4 +42,5 @@ Examples
> > >                 reg-io-width = <4>;
> > >                 clocks = <&sysctrl R9A06G032_CLK_UART0>;
> > >                 clock-names = "baudclk";
> > > +               power-domains = <&sysctrl>;
> >
> > This is an interesting example: according to the driver,
> > R9A06G032_CLK_UART0, is not clock used for power management?
> >
> > Oh, the real uart0 node in arch/arm/boot/dts/r9a06g032.dtsi uses
> >
> >     clocks = <&sysctrl R9A06G032_CLK_UART0>, <&sysctrl
> > R9A06G032_HCLK_UART0>;
> >     clock-names = "baudclk", "apb_pclk";
> >
> > That does make sense...
> Note that the Synopsys DW uart driver already gets the "apb_pclk" clock, so
> we don’t actually need to use clock domains to enable this clock.

That is not necessarily a problem:
  1) DT describes hardware, not software policy,
  2) It doesn't hurt to enable a clock twice.

There are still some R-Car drivers that manage clocks themselves, but
we're slowly migrating away from that, where possible. If the driver
is e.g. shared with a platform without clock domains, we obviously cannot
do that.

So you can take out that code again, that's up to you.

> This is also true for many of the peripheral drivers used on rzn1 (Synopsys
> gpio controller, i2c controller, gmac, dmac, Arasan sdio controller). The
> commit to add this clock to the i2c controller driver is my fault, as I was
> following the pattern of the others.
>
> Of the few drivers that don't already get the hclk/pclk used to access the
> peripherals is the Synopsys spi controller (though that currently doesn’t
> support runtime PM) and the USB Host controller.

Good, so the latter will start working magically, I assume? ;-)

Gr{oetje,eeting}s,

                        Geert

-- 
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
                                -- Linus Torvalds

RE: [PATCH v3 1/2] dt-bindings: clock: renesas,r9a06g032-sysctrl: Document power Domains

[Phil Edworthy]

Hi Geert,

On 03 June 2019 09:39 Geert Uytterhoeven wrote:
> On Mon, Jun 3, 2019 at 10:29 AM Phil Edworthy wrote:
> > On 28 May 2019 08:29 Geert Uytterhoeven wrote:
> > > On Fri, May 24, 2019 at 5:32 PM Gareth Williams wrote:
> > > > The driver is gaining power domain support, so add the new property to
> > > > the DT binding and update the examples.
> > > >
> > > > Signed-off-by: Gareth Williams <gareth.williams.jx@renesas.com>
> 
> > > > ---
> > > > a/Documentation/devicetree/bindings/clock/renesas,r9a06g032-
> sysctrl.txt
> > > > +++ b/Documentation/devicetree/bindings/clock/renesas,r9a06g032-
> sysctrl.txt
> > > @@ -40,4 +42,5 @@ Examples
> > > >                 reg-io-width = <4>;
> > > >                 clocks = <&sysctrl R9A06G032_CLK_UART0>;
> > > >                 clock-names = "baudclk";
> > > > +               power-domains = <&sysctrl>;
> > >
> > > This is an interesting example: according to the driver,
> > > R9A06G032_CLK_UART0, is not clock used for power management?
> > >
> > > Oh, the real uart0 node in arch/arm/boot/dts/r9a06g032.dtsi uses
> > >
> > >     clocks = <&sysctrl R9A06G032_CLK_UART0>, <&sysctrl
> > > R9A06G032_HCLK_UART0>;
> > >     clock-names = "baudclk", "apb_pclk";
> > >
> > > That does make sense...
> > Note that the Synopsys DW uart driver already gets the "apb_pclk" clock,
> so
> > we don’t actually need to use clock domains to enable this clock.
> 
> That is not necessarily a problem:
>   1) DT describes hardware, not software policy,
>   2) It doesn't hurt to enable a clock twice.
Yes, that was my take as well.

> There are still some R-Car drivers that manage clocks themselves, but
> we're slowly migrating away from that, where possible. If the driver
> is e.g. shared with a platform without clock domains, we obviously cannot
> do that.
> 
> So you can take out that code again, that's up to you.
I think leaving it as is best.

> > This is also true for many of the peripheral drivers used on rzn1 (Synopsys
> > gpio controller, i2c controller, gmac, dmac, Arasan sdio controller). The
> > commit to add this clock to the i2c controller driver is my fault, as I was
> > following the pattern of the others.
> >
> > Of the few drivers that don't already get the hclk/pclk used to access the
> > peripherals is the Synopsys spi controller (though that currently doesn’t
> > support runtime PM) and the USB Host controller.
> 
> Good, so the latter will start working magically, I assume? ;-)
Yes, except for the usb PLL. The rzn1 has a mode bit that switches USB
between 2xHost and 1xHost + 1xFunc, however the PLL must be started after
the mode bit has been set. That still needs to be implemented...

BR
Phil
 
> Gr{oetje,eeting}s,
> 
>                         Geert
> 
> --
> Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-
> m68k.org
> 
> In personal conversations with technical people, I call myself a hacker. But
> when I'm talking to journalists I just say "programmer" or something like that.
>                                 -- Linus Torvalds