[PATCH v8 10/21] iommu/mediatek: Refine protect memory definition

[PATCH v8 10/21] iommu/mediatek: Refine protect memory definition

[Yong Wu]

The protect memory setting is a little different in the different SoCs.
In the register REG_MMU_CTRL_REG(0x110), the TF_PROT(translation fault
protect) shift bit is normally 4 while it shift 5 bits only in the
mt8173. This patch delete the complex MACRO and use a common if-else
instead.

Signed-off-by: Yong Wu <yong.wu@mediatek.com>
Reviewed-by: Evan Green <evgreen@chromium.org>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
---
 drivers/iommu/mtk_iommu.c | 13 ++++++-------
 1 file changed, 6 insertions(+), 7 deletions(-)

diff --git a/drivers/iommu/mtk_iommu.c b/drivers/iommu/mtk_iommu.c
index a915c25..4f8a2cb 100644
--- a/drivers/iommu/mtk_iommu.c
+++ b/drivers/iommu/mtk_iommu.c
@@ -52,12 +52,9 @@
 #define REG_MMU_DCM_DIS				0x050
 
 #define REG_MMU_CTRL_REG			0x110
+#define F_MMU_TF_PROT_TO_PROGRAM_ADDR		(2 << 4)
 #define F_MMU_PREFETCH_RT_REPLACE_MOD		BIT(4)
-#define F_MMU_TF_PROTECT_SEL_SHIFT(data) \
-	((data)->plat_data->m4u_plat == M4U_MT2712 ? 4 : 5)
-/* It's named by F_MMU_TF_PROT_SEL in mt2712. */
-#define F_MMU_TF_PROTECT_SEL(prot, data) \
-	(((prot) & 0x3) << F_MMU_TF_PROTECT_SEL_SHIFT(data))
+#define F_MMU_TF_PROT_TO_PROGRAM_ADDR_MT8173	(2 << 5)
 
 #define REG_MMU_IVRP_PADDR			0x114
 
@@ -537,9 +534,11 @@ static int mtk_iommu_hw_init(const struct mtk_iommu_data *data)
 		return ret;
 	}
 
-	regval = F_MMU_TF_PROTECT_SEL(2, data);
 	if (data->plat_data->m4u_plat == M4U_MT8173)
-		regval |= F_MMU_PREFETCH_RT_REPLACE_MOD;
+		regval = F_MMU_PREFETCH_RT_REPLACE_MOD |
+			 F_MMU_TF_PROT_TO_PROGRAM_ADDR_MT8173;
+	else
+		regval = F_MMU_TF_PROT_TO_PROGRAM_ADDR;
 	writel_relaxed(regval, data->base + REG_MMU_CTRL_REG);
 
 	regval = F_L2_MULIT_HIT_EN |
-- 
1.9.1

[PATCH v8 11/21] iommu/mediatek: Move reset_axi into plat_data

[Yong Wu]

In mt8173 and mt8183, 0x48 is REG_MMU_STANDARD_AXI_MODE while it is
REG_MMU_CTRL in the other SoCs, and the bits meaning is completely
different with the REG_MMU_STANDARD_AXI_MODE.

This patch moves this property to plat_data, it's also a preparing
patch for mt8183.

Signed-off-by: Yong Wu <yong.wu@mediatek.com>
Reviewed-by: Nicolas Boichat <drinkcat@chromium.org>
Reviewed-by: Evan Green <evgreen@chromium.org>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
---
 drivers/iommu/mtk_iommu.c | 4 ++--
 drivers/iommu/mtk_iommu.h | 2 +-
 2 files changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/iommu/mtk_iommu.c b/drivers/iommu/mtk_iommu.c
index 4f8a2cb..1f9f307 100644
--- a/drivers/iommu/mtk_iommu.c
+++ b/drivers/iommu/mtk_iommu.c
@@ -575,8 +575,7 @@ static int mtk_iommu_hw_init(const struct mtk_iommu_data *data)
 	}
 	writel_relaxed(0, data->base + REG_MMU_DCM_DIS);
 
-	/* It's MISC control register whose default value is ok except mt8173.*/
-	if (data->plat_data->m4u_plat == M4U_MT8173)
+	if (data->plat_data->reset_axi)
 		writel_relaxed(0, data->base + REG_MMU_STANDARD_AXI_MODE);
 
 	if (devm_request_irq(data->dev, data->irq, mtk_iommu_isr, 0,
@@ -772,6 +771,7 @@ static int __maybe_unused mtk_iommu_resume(struct device *dev)
 	.m4u_plat     = M4U_MT8173,
 	.has_4gb_mode = true,
 	.has_bclk     = true,
+	.reset_axi    = true,
 	.larbid_remap = {0, 1, 2, 3, 4, 5}, /* Linear mapping. */
 };
 
diff --git a/drivers/iommu/mtk_iommu.h b/drivers/iommu/mtk_iommu.h
index 61fd5d6..55d73c1 100644
--- a/drivers/iommu/mtk_iommu.h
+++ b/drivers/iommu/mtk_iommu.h
@@ -46,7 +46,7 @@ struct mtk_iommu_plat_data {
 
 	/* HW will use the EMI clock if there isn't the "bclk". */
 	bool                has_bclk;
-
+	bool                reset_axi;
 	unsigned char       larbid_remap[MTK_LARB_NR_MAX];
 };
 
-- 
1.9.1

[PATCH v8 12/21] iommu/mediatek: Move vld_pa_rng into plat_data

[Yong Wu]

Both mt8173 and mt8183 don't have this vld_pa_rng(valid physical address
range) register while mt2712 have. Move it into the plat_data.

Signed-off-by: Yong Wu <yong.wu@mediatek.com>
Reviewed-by: Evan Green <evgreen@chromium.org>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
---
 drivers/iommu/mtk_iommu.c | 3 ++-
 drivers/iommu/mtk_iommu.h | 1 +
 2 files changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/iommu/mtk_iommu.c b/drivers/iommu/mtk_iommu.c
index 1f9f307..c5482dc 100644
--- a/drivers/iommu/mtk_iommu.c
+++ b/drivers/iommu/mtk_iommu.c
@@ -565,7 +565,7 @@ static int mtk_iommu_hw_init(const struct mtk_iommu_data *data)
 			 upper_32_bits(data->protect_base);
 	writel_relaxed(regval, data->base + REG_MMU_IVRP_PADDR);
 
-	if (data->enable_4GB && data->plat_data->m4u_plat != M4U_MT8173) {
+	if (data->enable_4GB && data->plat_data->has_vld_pa_rng) {
 		/*
 		 * If 4GB mode is enabled, the validate PA range is from
 		 * 0x1_0000_0000 to 0x1_ffff_ffff. here record bit[32:30].
@@ -764,6 +764,7 @@ static int __maybe_unused mtk_iommu_resume(struct device *dev)
 	.m4u_plat     = M4U_MT2712,
 	.has_4gb_mode = true,
 	.has_bclk     = true,
+	.has_vld_pa_rng   = true,
 	.larbid_remap = {0, 1, 2, 3, 4, 5, 6, 7, 8, 9},
 };
 
diff --git a/drivers/iommu/mtk_iommu.h b/drivers/iommu/mtk_iommu.h
index 55d73c1..ed94fbd 100644
--- a/drivers/iommu/mtk_iommu.h
+++ b/drivers/iommu/mtk_iommu.h
@@ -46,6 +46,7 @@ struct mtk_iommu_plat_data {
 
 	/* HW will use the EMI clock if there isn't the "bclk". */
 	bool                has_bclk;
+	bool                has_vld_pa_rng;
 	bool                reset_axi;
 	unsigned char       larbid_remap[MTK_LARB_NR_MAX];
 };
-- 
1.9.1

[PATCH v8 13/21] memory: mtk-smi: Add gals support

[Yong Wu]

In some SoCs like mt8183, SMI add GALS(Global Async Local Sync) module
which can help synchronize for the modules in different clock frequency.
It can be seen as a "asynchronous fifo". This is a example diagram:

            M4U
             |
         ----------
         |        |
     gals0-rx   gals1-rx
         |        |
         |        |
     gals0-tx   gals1-tx
         |        |
        ------------
         SMI Common
        ------------
             |
  +-----+--------+-----+- ...
  |     |        |     |
  |  gals-rx  gals-rx  |
  |     |        |     |
  |     |        |     |
  |  gals-tx  gals-tx  |
  |     |        |     |
larb1 larb2   larb3  larb4

GALS only help transfer the command/data while it doesn't have the
configuring register, thus it has the special "smi" clock and doesn't
have the "apb" clock. From the diagram above, we add "gals0" and
"gals1" clocks for smi-common and add a "gals" clock for smi-larb.

This patch adds gals clock supporting in the SMI. Note that some larbs
may still don't have the "gals" clock like larb1 and larb4 above.

This is also a preparing patch for mt8183 which has GALS.

CC: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: Yong Wu <yong.wu@mediatek.com>
Reviewed-by: Evan Green <evgreen@chromium.org>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
---
 drivers/memory/mtk-smi.c | 36 ++++++++++++++++++++++++++++++++++++
 1 file changed, 36 insertions(+)

diff --git a/drivers/memory/mtk-smi.c b/drivers/memory/mtk-smi.c
index 8a2f968..91634d7 100644
--- a/drivers/memory/mtk-smi.c
+++ b/drivers/memory/mtk-smi.c
@@ -56,6 +56,7 @@ enum mtk_smi_gen {
 
 struct mtk_smi_common_plat {
 	enum mtk_smi_gen gen;
+	bool             has_gals;
 };
 
 struct mtk_smi_larb_gen {
@@ -63,11 +64,13 @@ struct mtk_smi_larb_gen {
 	int port_in_larb[MTK_LARB_NR_MAX + 1];
 	void (*config_port)(struct device *);
 	unsigned int larb_direct_to_common_mask;
+	bool             has_gals;
 };
 
 struct mtk_smi {
 	struct device			*dev;
 	struct clk			*clk_apb, *clk_smi;
+	struct clk			*clk_gals0, *clk_gals1;
 	struct clk			*clk_async; /*only needed by mt2701*/
 	void __iomem			*smi_ao_base;
 
@@ -99,8 +102,20 @@ static int mtk_smi_enable(const struct mtk_smi *smi)
 	if (ret)
 		goto err_disable_apb;
 
+	ret = clk_prepare_enable(smi->clk_gals0);
+	if (ret)
+		goto err_disable_smi;
+
+	ret = clk_prepare_enable(smi->clk_gals1);
+	if (ret)
+		goto err_disable_gals0;
+
 	return 0;
 
+err_disable_gals0:
+	clk_disable_unprepare(smi->clk_gals0);
+err_disable_smi:
+	clk_disable_unprepare(smi->clk_smi);
 err_disable_apb:
 	clk_disable_unprepare(smi->clk_apb);
 err_put_pm:
@@ -110,6 +125,8 @@ static int mtk_smi_enable(const struct mtk_smi *smi)
 
 static void mtk_smi_disable(const struct mtk_smi *smi)
 {
+	clk_disable_unprepare(smi->clk_gals1);
+	clk_disable_unprepare(smi->clk_gals0);
 	clk_disable_unprepare(smi->clk_smi);
 	clk_disable_unprepare(smi->clk_apb);
 	pm_runtime_put_sync(smi->dev);
@@ -310,6 +327,15 @@ static int mtk_smi_larb_probe(struct platform_device *pdev)
 	larb->smi.clk_smi = devm_clk_get(dev, "smi");
 	if (IS_ERR(larb->smi.clk_smi))
 		return PTR_ERR(larb->smi.clk_smi);
+
+	if (larb->larb_gen->has_gals) {
+		/* The larbs may still haven't gals even if the SoC support.*/
+		larb->smi.clk_gals0 = devm_clk_get(dev, "gals");
+		if (PTR_ERR(larb->smi.clk_gals0) == -ENOENT)
+			larb->smi.clk_gals0 = NULL;
+		else if (IS_ERR(larb->smi.clk_gals0))
+			return PTR_ERR(larb->smi.clk_gals0);
+	}
 	larb->smi.dev = dev;
 
 	if (larb->larb_gen->need_larbid) {
@@ -402,6 +428,16 @@ static int mtk_smi_common_probe(struct platform_device *pdev)
 	if (IS_ERR(common->clk_smi))
 		return PTR_ERR(common->clk_smi);
 
+	if (common->plat->has_gals) {
+		common->clk_gals0 = devm_clk_get(dev, "gals0");
+		if (IS_ERR(common->clk_gals0))
+			return PTR_ERR(common->clk_gals0);
+
+		common->clk_gals1 = devm_clk_get(dev, "gals1");
+		if (IS_ERR(common->clk_gals1))
+			return PTR_ERR(common->clk_gals1);
+	}
+
 	/*
 	 * for mtk smi gen 1, we need to get the ao(always on) base to config
 	 * m4u port, and we need to enable the aync clock for transform the smi
-- 
1.9.1

[PATCH v8 14/21] iommu/mediatek: Add mt8183 IOMMU support

[Yong Wu]

The M4U IP blocks in mt8183 is MediaTek's generation2 M4U which use
the ARM Short-descriptor like mt8173, and most of the HW registers
are the same.

Here list main differences between mt8183 and mt8173/mt2712:
1) mt8183 has only one M4U HW like mt8173 while mt2712 has two.
2) mt8183 don't have the "bclk" clock, it use the EMI clock instead.
3) mt8183 can support the dram over 4GB, but it doesn't call this "4GB
mode".
4) mt8183 pgtable base register(0x0) extend bit[1:0] which represent
the bit[33:32] in the physical address of the pgtable base, But the
standard ttbr0[1] means the S bit which is enabled defaultly, Hence,
we add a mask.
5) mt8183 HW has a GALS modules, SMI should enable "has_gals" support.
6) mt8183 need reset_axi like mt8173.
7) the larb-id in smi-common is remapped. M4U should add its larbid_remap.

Signed-off-by: Yong Wu <yong.wu@mediatek.com>
Reviewed-by: Evan Green <evgreen@chromium.org>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
---
 drivers/iommu/mtk_iommu.c | 15 ++++++++++++---
 drivers/iommu/mtk_iommu.h |  1 +
 drivers/memory/mtk-smi.c  | 20 ++++++++++++++++++++
 3 files changed, 33 insertions(+), 3 deletions(-)

diff --git a/drivers/iommu/mtk_iommu.c b/drivers/iommu/mtk_iommu.c
index c5482dc..c518212 100644
--- a/drivers/iommu/mtk_iommu.c
+++ b/drivers/iommu/mtk_iommu.c
@@ -36,6 +36,7 @@
 #include "mtk_iommu.h"
 
 #define REG_MMU_PT_BASE_ADDR			0x000
+#define MMU_PT_ADDR_MASK			GENMASK(31, 7)
 
 #define REG_MMU_INVALIDATE			0x020
 #define F_ALL_INVLD				0x2
@@ -355,7 +356,7 @@ static int mtk_iommu_attach_device(struct iommu_domain *domain,
 	/* Update the pgtable base address register of the M4U HW */
 	if (!data->m4u_dom) {
 		data->m4u_dom = dom;
-		writel(dom->cfg.arm_v7s_cfg.ttbr[0],
+		writel(dom->cfg.arm_v7s_cfg.ttbr[0] & MMU_PT_ADDR_MASK,
 		       data->base + REG_MMU_PT_BASE_ADDR);
 	}
 
@@ -735,6 +736,7 @@ static int __maybe_unused mtk_iommu_resume(struct device *dev)
 {
 	struct mtk_iommu_data *data = dev_get_drvdata(dev);
 	struct mtk_iommu_suspend_reg *reg = &data->reg;
+	struct mtk_iommu_domain *m4u_dom = data->m4u_dom;
 	void __iomem *base = data->base;
 	int ret;
 
@@ -750,8 +752,8 @@ static int __maybe_unused mtk_iommu_resume(struct device *dev)
 	writel_relaxed(reg->int_control0, base + REG_MMU_INT_CONTROL0);
 	writel_relaxed(reg->int_main_control, base + REG_MMU_INT_MAIN_CONTROL);
 	writel_relaxed(reg->ivrp_paddr, base + REG_MMU_IVRP_PADDR);
-	if (data->m4u_dom)
-		writel(data->m4u_dom->cfg.arm_v7s_cfg.ttbr[0],
+	if (m4u_dom)
+		writel(m4u_dom->cfg.arm_v7s_cfg.ttbr[0] & MMU_PT_ADDR_MASK,
 		       base + REG_MMU_PT_BASE_ADDR);
 	return 0;
 }
@@ -776,9 +778,16 @@ static int __maybe_unused mtk_iommu_resume(struct device *dev)
 	.larbid_remap = {0, 1, 2, 3, 4, 5}, /* Linear mapping. */
 };
 
+static const struct mtk_iommu_plat_data mt8183_data = {
+	.m4u_plat     = M4U_MT8183,
+	.reset_axi    = true,
+	.larbid_remap = {0, 4, 5, 6, 7, 2, 3, 1},
+};
+
 static const struct of_device_id mtk_iommu_of_ids[] = {
 	{ .compatible = "mediatek,mt2712-m4u", .data = &mt2712_data},
 	{ .compatible = "mediatek,mt8173-m4u", .data = &mt8173_data},
+	{ .compatible = "mediatek,mt8183-m4u", .data = &mt8183_data},
 	{}
 };
 
diff --git a/drivers/iommu/mtk_iommu.h b/drivers/iommu/mtk_iommu.h
index ed94fbd..47063d4 100644
--- a/drivers/iommu/mtk_iommu.h
+++ b/drivers/iommu/mtk_iommu.h
@@ -38,6 +38,7 @@ enum mtk_iommu_plat {
 	M4U_MT2701,
 	M4U_MT2712,
 	M4U_MT8173,
+	M4U_MT8183,
 };
 
 struct mtk_iommu_plat_data {
diff --git a/drivers/memory/mtk-smi.c b/drivers/memory/mtk-smi.c
index 91634d7..a430721 100644
--- a/drivers/memory/mtk-smi.c
+++ b/drivers/memory/mtk-smi.c
@@ -285,6 +285,13 @@ static void mtk_smi_larb_config_port_gen1(struct device *dev)
 	.larb_direct_to_common_mask = BIT(8) | BIT(9),      /* bdpsys */
 };
 
+static const struct mtk_smi_larb_gen mtk_smi_larb_mt8183 = {
+	.has_gals                   = true,
+	.config_port                = mtk_smi_larb_config_port_gen2_general,
+	.larb_direct_to_common_mask = BIT(2) | BIT(3) | BIT(7),
+				      /* IPU0 | IPU1 | CCU */
+};
+
 static const struct of_device_id mtk_smi_larb_of_ids[] = {
 	{
 		.compatible = "mediatek,mt8173-smi-larb",
@@ -298,6 +305,10 @@ static void mtk_smi_larb_config_port_gen1(struct device *dev)
 		.compatible = "mediatek,mt2712-smi-larb",
 		.data = &mtk_smi_larb_mt2712
 	},
+	{
+		.compatible = "mediatek,mt8183-smi-larb",
+		.data = &mtk_smi_larb_mt8183
+	},
 	{}
 };
 
@@ -391,6 +402,11 @@ static int mtk_smi_larb_remove(struct platform_device *pdev)
 	.gen = MTK_SMI_GEN2,
 };
 
+static const struct mtk_smi_common_plat mtk_smi_common_mt8183 = {
+	.gen      = MTK_SMI_GEN2,
+	.has_gals = true,
+};
+
 static const struct of_device_id mtk_smi_common_of_ids[] = {
 	{
 		.compatible = "mediatek,mt8173-smi-common",
@@ -404,6 +420,10 @@ static int mtk_smi_larb_remove(struct platform_device *pdev)
 		.compatible = "mediatek,mt2712-smi-common",
 		.data = &mtk_smi_common_gen2,
 	},
+	{
+		.compatible = "mediatek,mt8183-smi-common",
+		.data = &mtk_smi_common_mt8183,
+	},
 	{}
 };
 
-- 
1.9.1

[PATCH v8 15/21] iommu/mediatek: Add mmu1 support

[Yong Wu]

Normally the M4U HW connect EMI with smi. the diagram is like below:
              EMI
               |
              M4U
               |
            smi-common
               |
       -----------------
       |    |    |     |    ...
    larb0 larb1  larb2 larb3

Actually there are 2 mmu cells in the M4U HW, like this diagram:

              EMI
           ---------
            |     |
           mmu0  mmu1     <- M4U
            |     |
           ---------
               |
            smi-common
               |
       -----------------
       |    |    |     |    ...
    larb0 larb1  larb2 larb3

This patch add support for mmu1. In order to get better performance,
we could adjust some larbs go to mmu1 while the others still go to
mmu0. This is controlled by a SMI COMMON register SMI_BUS_SEL(0x220).

mt2712, mt8173 and mt8183 M4U HW all have 2 mmu cells. the default
value of that register is 0 which means all the larbs go to mmu0
defaultly.

This is a preparing patch for adjusting SMI_BUS_SEL for mt8183.

Signed-off-by: Yong Wu <yong.wu@mediatek.com>
Reviewed-by: Evan Green <evgreen@chromium.org>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
---
 drivers/iommu/mtk_iommu.c | 46 +++++++++++++++++++++++++++++-----------------
 1 file changed, 29 insertions(+), 17 deletions(-)

diff --git a/drivers/iommu/mtk_iommu.c b/drivers/iommu/mtk_iommu.c
index c518212..1459ec3 100644
--- a/drivers/iommu/mtk_iommu.c
+++ b/drivers/iommu/mtk_iommu.c
@@ -72,26 +72,32 @@
 #define F_INT_CLR_BIT				BIT(12)
 
 #define REG_MMU_INT_MAIN_CONTROL		0x124
-#define F_INT_TRANSLATION_FAULT			BIT(0)
-#define F_INT_MAIN_MULTI_HIT_FAULT		BIT(1)
-#define F_INT_INVALID_PA_FAULT			BIT(2)
-#define F_INT_ENTRY_REPLACEMENT_FAULT		BIT(3)
-#define F_INT_TLB_MISS_FAULT			BIT(4)
-#define F_INT_MISS_TRANSACTION_FIFO_FAULT	BIT(5)
-#define F_INT_PRETETCH_TRANSATION_FIFO_FAULT	BIT(6)
+						/* mmu0 | mmu1 */
+#define F_INT_TRANSLATION_FAULT			(BIT(0) | BIT(7))
+#define F_INT_MAIN_MULTI_HIT_FAULT		(BIT(1) | BIT(8))
+#define F_INT_INVALID_PA_FAULT			(BIT(2) | BIT(9))
+#define F_INT_ENTRY_REPLACEMENT_FAULT		(BIT(3) | BIT(10))
+#define F_INT_TLB_MISS_FAULT			(BIT(4) | BIT(11))
+#define F_INT_MISS_TRANSACTION_FIFO_FAULT	(BIT(5) | BIT(12))
+#define F_INT_PRETETCH_TRANSATION_FIFO_FAULT	(BIT(6) | BIT(13))
 
 #define REG_MMU_CPE_DONE			0x12C
 
 #define REG_MMU_FAULT_ST1			0x134
+#define F_REG_MMU0_FAULT_MASK			GENMASK(6, 0)
+#define F_REG_MMU1_FAULT_MASK			GENMASK(13, 7)
 
-#define REG_MMU_FAULT_VA			0x13c
+#define REG_MMU0_FAULT_VA			0x13c
 #define F_MMU_FAULT_VA_WRITE_BIT		BIT(1)
 #define F_MMU_FAULT_VA_LAYER_BIT		BIT(0)
 
-#define REG_MMU_INVLD_PA			0x140
-#define REG_MMU_INT_ID				0x150
-#define F_MMU0_INT_ID_LARB_ID(a)		(((a) >> 7) & 0x7)
-#define F_MMU0_INT_ID_PORT_ID(a)		(((a) >> 2) & 0x1f)
+#define REG_MMU0_INVLD_PA			0x140
+#define REG_MMU1_FAULT_VA			0x144
+#define REG_MMU1_INVLD_PA			0x148
+#define REG_MMU0_INT_ID				0x150
+#define REG_MMU1_INT_ID				0x154
+#define F_MMU_INT_ID_LARB_ID(a)			(((a) >> 7) & 0x7)
+#define F_MMU_INT_ID_PORT_ID(a)			(((a) >> 2) & 0x1f)
 
 #define MTK_PROTECT_PA_ALIGN			128
 
@@ -224,13 +230,19 @@ static irqreturn_t mtk_iommu_isr(int irq, void *dev_id)
 
 	/* Read error info from registers */
 	int_state = readl_relaxed(data->base + REG_MMU_FAULT_ST1);
-	fault_iova = readl_relaxed(data->base + REG_MMU_FAULT_VA);
+	if (int_state & F_REG_MMU0_FAULT_MASK) {
+		regval = readl_relaxed(data->base + REG_MMU0_INT_ID);
+		fault_iova = readl_relaxed(data->base + REG_MMU0_FAULT_VA);
+		fault_pa = readl_relaxed(data->base + REG_MMU0_INVLD_PA);
+	} else {
+		regval = readl_relaxed(data->base + REG_MMU1_INT_ID);
+		fault_iova = readl_relaxed(data->base + REG_MMU1_FAULT_VA);
+		fault_pa = readl_relaxed(data->base + REG_MMU1_INVLD_PA);
+	}
 	layer = fault_iova & F_MMU_FAULT_VA_LAYER_BIT;
 	write = fault_iova & F_MMU_FAULT_VA_WRITE_BIT;
-	fault_pa = readl_relaxed(data->base + REG_MMU_INVLD_PA);
-	regval = readl_relaxed(data->base + REG_MMU_INT_ID);
-	fault_larb = F_MMU0_INT_ID_LARB_ID(regval);
-	fault_port = F_MMU0_INT_ID_PORT_ID(regval);
+	fault_larb = F_MMU_INT_ID_LARB_ID(regval);
+	fault_port = F_MMU_INT_ID_PORT_ID(regval);
 
 	fault_larb = data->plat_data->larbid_remap[fault_larb];
 
-- 
1.9.1

[PATCH v8 16/21] memory: mtk-smi: Invoke pm runtime_callback to enable clocks

[Yong Wu]

This patch only move the clk_prepare_enable and config_port into the
runtime suspend/resume callback. It doesn't change the code content
and sequence.

This is a preparing patch for adjusting SMI_BUS_SEL for mt8183.
(SMI_BUS_SEL need to be restored after smi-common resume every time.)
Also it gives a chance to get rid of mtk_smi_larb_get/put which could
be a next topic.

CC: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: Yong Wu <yong.wu@mediatek.com>
Reviewed-by: Evan Green <evgreen@chromium.org>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
---
 drivers/memory/mtk-smi.c | 113 ++++++++++++++++++++++++++++++-----------------
 1 file changed, 72 insertions(+), 41 deletions(-)

diff --git a/drivers/memory/mtk-smi.c b/drivers/memory/mtk-smi.c
index a430721..9790801 100644
--- a/drivers/memory/mtk-smi.c
+++ b/drivers/memory/mtk-smi.c
@@ -86,17 +86,13 @@ struct mtk_smi_larb { /* larb: local arbiter */
 	u32				*mmu;
 };
 
-static int mtk_smi_enable(const struct mtk_smi *smi)
+static int mtk_smi_clk_enable(const struct mtk_smi *smi)
 {
 	int ret;
 
-	ret = pm_runtime_get_sync(smi->dev);
-	if (ret < 0)
-		return ret;
-
 	ret = clk_prepare_enable(smi->clk_apb);
 	if (ret)
-		goto err_put_pm;
+		return ret;
 
 	ret = clk_prepare_enable(smi->clk_smi);
 	if (ret)
@@ -118,59 +114,28 @@ static int mtk_smi_enable(const struct mtk_smi *smi)
 	clk_disable_unprepare(smi->clk_smi);
 err_disable_apb:
 	clk_disable_unprepare(smi->clk_apb);
-err_put_pm:
-	pm_runtime_put_sync(smi->dev);
 	return ret;
 }
 
-static void mtk_smi_disable(const struct mtk_smi *smi)
+static void mtk_smi_clk_disable(const struct mtk_smi *smi)
 {
 	clk_disable_unprepare(smi->clk_gals1);
 	clk_disable_unprepare(smi->clk_gals0);
 	clk_disable_unprepare(smi->clk_smi);
 	clk_disable_unprepare(smi->clk_apb);
-	pm_runtime_put_sync(smi->dev);
 }
 
 int mtk_smi_larb_get(struct device *larbdev)
 {
-	struct mtk_smi_larb *larb = dev_get_drvdata(larbdev);
-	const struct mtk_smi_larb_gen *larb_gen = larb->larb_gen;
-	struct mtk_smi *common = dev_get_drvdata(larb->smi_common_dev);
-	int ret;
+	int ret = pm_runtime_get_sync(larbdev);
 
-	/* Enable the smi-common's power and clocks */
-	ret = mtk_smi_enable(common);
-	if (ret)
-		return ret;
-
-	/* Enable the larb's power and clocks */
-	ret = mtk_smi_enable(&larb->smi);
-	if (ret) {
-		mtk_smi_disable(common);
-		return ret;
-	}
-
-	/* Configure the iommu info for this larb */
-	larb_gen->config_port(larbdev);
-
-	return 0;
+	return (ret < 0) ? ret : 0;
 }
 EXPORT_SYMBOL_GPL(mtk_smi_larb_get);
 
 void mtk_smi_larb_put(struct device *larbdev)
 {
-	struct mtk_smi_larb *larb = dev_get_drvdata(larbdev);
-	struct mtk_smi *common = dev_get_drvdata(larb->smi_common_dev);
-
-	/*
-	 * Don't de-configure the iommu info for this larb since there may be
-	 * several modules in this larb.
-	 * The iommu info will be reset after power off.
-	 */
-
-	mtk_smi_disable(&larb->smi);
-	mtk_smi_disable(common);
+	pm_runtime_put_sync(larbdev);
 }
 EXPORT_SYMBOL_GPL(mtk_smi_larb_put);
 
@@ -385,12 +350,52 @@ static int mtk_smi_larb_remove(struct platform_device *pdev)
 	return 0;
 }
 
+static int __maybe_unused mtk_smi_larb_resume(struct device *dev)
+{
+	struct mtk_smi_larb *larb = dev_get_drvdata(dev);
+	const struct mtk_smi_larb_gen *larb_gen = larb->larb_gen;
+	int ret;
+
+	/* Power on smi-common. */
+	ret = pm_runtime_get_sync(larb->smi_common_dev);
+	if (ret < 0) {
+		dev_err(dev, "Failed to pm get for smi-common(%d).\n", ret);
+		return ret;
+	}
+
+	ret = mtk_smi_clk_enable(&larb->smi);
+	if (ret < 0) {
+		dev_err(dev, "Failed to enable clock(%d).\n", ret);
+		pm_runtime_put_sync(larb->smi_common_dev);
+		return ret;
+	}
+
+	/* Configure the basic setting for this larb */
+	larb_gen->config_port(dev);
+
+	return 0;
+}
+
+static int __maybe_unused mtk_smi_larb_suspend(struct device *dev)
+{
+	struct mtk_smi_larb *larb = dev_get_drvdata(dev);
+
+	mtk_smi_clk_disable(&larb->smi);
+	pm_runtime_put_sync(larb->smi_common_dev);
+	return 0;
+}
+
+static const struct dev_pm_ops smi_larb_pm_ops = {
+	SET_RUNTIME_PM_OPS(mtk_smi_larb_suspend, mtk_smi_larb_resume, NULL)
+};
+
 static struct platform_driver mtk_smi_larb_driver = {
 	.probe	= mtk_smi_larb_probe,
 	.remove	= mtk_smi_larb_remove,
 	.driver	= {
 		.name = "mtk-smi-larb",
 		.of_match_table = mtk_smi_larb_of_ids,
+		.pm             = &smi_larb_pm_ops,
 	}
 };
 
@@ -489,12 +494,38 @@ static int mtk_smi_common_remove(struct platform_device *pdev)
 	return 0;
 }
 
+static int __maybe_unused mtk_smi_common_resume(struct device *dev)
+{
+	struct mtk_smi *common = dev_get_drvdata(dev);
+	int ret;
+
+	ret = mtk_smi_clk_enable(common);
+	if (ret) {
+		dev_err(common->dev, "Failed to enable clock(%d).\n", ret);
+		return ret;
+	}
+	return 0;
+}
+
+static int __maybe_unused mtk_smi_common_suspend(struct device *dev)
+{
+	struct mtk_smi *common = dev_get_drvdata(dev);
+
+	mtk_smi_clk_disable(common);
+	return 0;
+}
+
+static const struct dev_pm_ops smi_common_pm_ops = {
+	SET_RUNTIME_PM_OPS(mtk_smi_common_suspend, mtk_smi_common_resume, NULL)
+};
+
 static struct platform_driver mtk_smi_common_driver = {
 	.probe	= mtk_smi_common_probe,
 	.remove = mtk_smi_common_remove,
 	.driver	= {
 		.name = "mtk-smi-common",
 		.of_match_table = mtk_smi_common_of_ids,
+		.pm             = &smi_common_pm_ops,
 	}
 };
 
-- 
1.9.1

[PATCH v8 17/21] memory: mtk-smi: Add bus_sel for mt8183

[Yong Wu]

There are 2 mmu cells in a M4U HW. we could adjust some larbs entering
mmu0 or mmu1 to balance the bandwidth via the smi-common register
SMI_BUS_SEL(0x220)(Each larb occupy 2 bits).

In mt8183, For better performance, we switch larb1/2/5/7 to enter
mmu1 while the others still keep enter mmu0.

In mt8173 and mt2712, we don't get the performance issue,
Keep its default value(0x0), that means all the larbs enter mmu0.

Note: smi gen1(mt2701/mt7623) don't have this bus_sel.

And, the base of smi-common is completely different with smi_ao_base
of gen1, thus I add new variable for that.

CC: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: Yong Wu <yong.wu@mediatek.com>
Reviewed-by: Evan Green <evgreen@chromium.org>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
---
In this version, Add a union suggestted from Matthias.
---
 drivers/memory/mtk-smi.c | 24 ++++++++++++++++++++++--
 1 file changed, 22 insertions(+), 2 deletions(-)

diff --git a/drivers/memory/mtk-smi.c b/drivers/memory/mtk-smi.c
index 9790801..71cb2cf 100644
--- a/drivers/memory/mtk-smi.c
+++ b/drivers/memory/mtk-smi.c
@@ -49,6 +49,12 @@
 #define SMI_LARB_NONSEC_CON(id)	(0x380 + ((id) * 4))
 #define F_MMU_EN		BIT(0)
 
+/* SMI COMMON */
+#define SMI_BUS_SEL			0x220
+#define SMI_BUS_LARB_SHIFT(larbid)	((larbid) << 1)
+/* All are MMU0 defaultly. Only specialize mmu1 here. */
+#define F_MMU1_LARB(larbid)		(0x1 << SMI_BUS_LARB_SHIFT(larbid))
+
 enum mtk_smi_gen {
 	MTK_SMI_GEN1,
 	MTK_SMI_GEN2
@@ -57,6 +63,7 @@ enum mtk_smi_gen {
 struct mtk_smi_common_plat {
 	enum mtk_smi_gen gen;
 	bool             has_gals;
+	u32              bus_sel; /* Balance some larbs to enter mmu0 or mmu1 */
 };
 
 struct mtk_smi_larb_gen {
@@ -72,8 +79,10 @@ struct mtk_smi {
 	struct clk			*clk_apb, *clk_smi;
 	struct clk			*clk_gals0, *clk_gals1;
 	struct clk			*clk_async; /*only needed by mt2701*/
-	void __iomem			*smi_ao_base;
-
+	union {
+		void __iomem		*smi_ao_base; /* only for gen1 */
+		void __iomem		*base;	      /* only for gen2 */
+	};
 	const struct mtk_smi_common_plat *plat;
 };
 
@@ -410,6 +419,8 @@ static int __maybe_unused mtk_smi_larb_suspend(struct device *dev)
 static const struct mtk_smi_common_plat mtk_smi_common_mt8183 = {
 	.gen      = MTK_SMI_GEN2,
 	.has_gals = true,
+	.bus_sel  = F_MMU1_LARB(1) | F_MMU1_LARB(2) | F_MMU1_LARB(5) |
+		    F_MMU1_LARB(7),
 };
 
 static const struct of_device_id mtk_smi_common_of_ids[] = {
@@ -482,6 +493,11 @@ static int mtk_smi_common_probe(struct platform_device *pdev)
 		ret = clk_prepare_enable(common->clk_async);
 		if (ret)
 			return ret;
+	} else {
+		res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+		common->base = devm_ioremap_resource(dev, res);
+		if (IS_ERR(common->base))
+			return PTR_ERR(common->base);
 	}
 	pm_runtime_enable(dev);
 	platform_set_drvdata(pdev, common);
@@ -497,6 +513,7 @@ static int mtk_smi_common_remove(struct platform_device *pdev)
 static int __maybe_unused mtk_smi_common_resume(struct device *dev)
 {
 	struct mtk_smi *common = dev_get_drvdata(dev);
+	u32 bus_sel = common->plat->bus_sel;
 	int ret;
 
 	ret = mtk_smi_clk_enable(common);
@@ -504,6 +521,9 @@ static int __maybe_unused mtk_smi_common_resume(struct device *dev)
 		dev_err(common->dev, "Failed to enable clock(%d).\n", ret);
 		return ret;
 	}
+
+	if (common->plat->gen == MTK_SMI_GEN2 && bus_sel)
+		writel(bus_sel, common->base + SMI_BUS_SEL);
 	return 0;
 }
 
-- 
1.9.1

[PATCH v8 18/21] iommu/mediatek: Fix VLD_PA_RNG register backup when suspend

[Yong Wu]

The register VLD_PA_RNG(0x118) was forgot to backup while adding 4GB
mode support for mt2712. this patch add it.

Fixes: 30e2fccf9512 ("iommu/mediatek: Enlarge the validate PA range
for 4GB mode")
Signed-off-by: Yong Wu <yong.wu@mediatek.com>
Reviewed-by: Evan Green <evgreen@chromium.org>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
---
 drivers/iommu/mtk_iommu.c | 2 ++
 drivers/iommu/mtk_iommu.h | 1 +
 2 files changed, 3 insertions(+)

diff --git a/drivers/iommu/mtk_iommu.c b/drivers/iommu/mtk_iommu.c
index 1459ec3..24600aa 100644
--- a/drivers/iommu/mtk_iommu.c
+++ b/drivers/iommu/mtk_iommu.c
@@ -740,6 +740,7 @@ static int __maybe_unused mtk_iommu_suspend(struct device *dev)
 	reg->int_control0 = readl_relaxed(base + REG_MMU_INT_CONTROL0);
 	reg->int_main_control = readl_relaxed(base + REG_MMU_INT_MAIN_CONTROL);
 	reg->ivrp_paddr = readl_relaxed(base + REG_MMU_IVRP_PADDR);
+	reg->vld_pa_rng = readl_relaxed(base + REG_MMU_VLD_PA_RNG);
 	clk_disable_unprepare(data->bclk);
 	return 0;
 }
@@ -764,6 +765,7 @@ static int __maybe_unused mtk_iommu_resume(struct device *dev)
 	writel_relaxed(reg->int_control0, base + REG_MMU_INT_CONTROL0);
 	writel_relaxed(reg->int_main_control, base + REG_MMU_INT_MAIN_CONTROL);
 	writel_relaxed(reg->ivrp_paddr, base + REG_MMU_IVRP_PADDR);
+	writel_relaxed(reg->vld_pa_rng, base + REG_MMU_VLD_PA_RNG);
 	if (m4u_dom)
 		writel(m4u_dom->cfg.arm_v7s_cfg.ttbr[0] & MMU_PT_ADDR_MASK,
 		       base + REG_MMU_PT_BASE_ADDR);
diff --git a/drivers/iommu/mtk_iommu.h b/drivers/iommu/mtk_iommu.h
index 47063d4..3954876 100644
--- a/drivers/iommu/mtk_iommu.h
+++ b/drivers/iommu/mtk_iommu.h
@@ -32,6 +32,7 @@ struct mtk_iommu_suspend_reg {
 	u32				int_control0;
 	u32				int_main_control;
 	u32				ivrp_paddr;
+	u32				vld_pa_rng;
 };
 
 enum mtk_iommu_plat {
-- 
1.9.1

[PATCH v8 19/21] memory: mtk-smi: Get rid of need_larbid

[Yong Wu]

The "mediatek,larb-id" has already been parsed in MTK IOMMU driver.
It's no need to parse it again in SMI driver. Only clean some codes.
This patch is fit for all the current mt2701, mt2712, mt7623, mt8173
and mt8183.

After this patch, the "mediatek,larb-id" only be needed for mt2712
which have 2 M4Us. In the other SoCs, we can get the larb-id from M4U
in which the larbs in the "mediatek,larbs" always are ordered.

Correspondingly, the larb_nr in the "struct mtk_smi_iommu" could also
be deleted.

CC: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: Yong Wu <yong.wu@mediatek.com>
Reviewed-by: Evan Green <evgreen@chromium.org>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
---
 drivers/iommu/mtk_iommu.c    |  1 -
 drivers/iommu/mtk_iommu_v1.c |  2 --
 drivers/memory/mtk-smi.c     | 26 ++------------------------
 include/soc/mediatek/smi.h   |  1 -
 4 files changed, 2 insertions(+), 28 deletions(-)

diff --git a/drivers/iommu/mtk_iommu.c b/drivers/iommu/mtk_iommu.c
index 24600aa..fcf18d7 100644
--- a/drivers/iommu/mtk_iommu.c
+++ b/drivers/iommu/mtk_iommu.c
@@ -654,7 +654,6 @@ static int mtk_iommu_probe(struct platform_device *pdev)
 					     "mediatek,larbs", NULL);
 	if (larb_nr < 0)
 		return larb_nr;
-	data->smi_imu.larb_nr = larb_nr;
 
 	for (i = 0; i < larb_nr; i++) {
 		struct device_node *larbnode;
diff --git a/drivers/iommu/mtk_iommu_v1.c b/drivers/iommu/mtk_iommu_v1.c
index 52b01e3..73308ad 100644
--- a/drivers/iommu/mtk_iommu_v1.c
+++ b/drivers/iommu/mtk_iommu_v1.c
@@ -624,8 +624,6 @@ static int mtk_iommu_probe(struct platform_device *pdev)
 		larb_nr++;
 	}
 
-	data->smi_imu.larb_nr = larb_nr;
-
 	platform_set_drvdata(pdev, data);
 
 	ret = mtk_iommu_hw_init(data);
diff --git a/drivers/memory/mtk-smi.c b/drivers/memory/mtk-smi.c
index 71cb2cf..7d13a0b 100644
--- a/drivers/memory/mtk-smi.c
+++ b/drivers/memory/mtk-smi.c
@@ -67,7 +67,6 @@ struct mtk_smi_common_plat {
 };
 
 struct mtk_smi_larb_gen {
-	bool need_larbid;
 	int port_in_larb[MTK_LARB_NR_MAX + 1];
 	void (*config_port)(struct device *);
 	unsigned int larb_direct_to_common_mask;
@@ -155,18 +154,9 @@ void mtk_smi_larb_put(struct device *larbdev)
 	struct mtk_smi_iommu *smi_iommu = data;
 	unsigned int         i;
 
-	if (larb->larb_gen->need_larbid) {
-		larb->mmu = &smi_iommu->larb_imu[larb->larbid].mmu;
-		return 0;
-	}
-
-	/*
-	 * If there is no larbid property, Loop to find the corresponding
-	 * iommu information.
-	 */
-	for (i = 0; i < smi_iommu->larb_nr; i++) {
+	for (i = 0; i < MTK_LARB_NR_MAX; i++) {
 		if (dev == smi_iommu->larb_imu[i].dev) {
-			/* The 'mmu' may be updated in iommu-attach/detach. */
+			larb->larbid = i;
 			larb->mmu = &smi_iommu->larb_imu[i].mmu;
 			return 0;
 		}
@@ -245,7 +235,6 @@ static void mtk_smi_larb_config_port_gen1(struct device *dev)
 };
 
 static const struct mtk_smi_larb_gen mtk_smi_larb_mt2701 = {
-	.need_larbid = true,
 	.port_in_larb = {
 		LARB0_PORT_OFFSET, LARB1_PORT_OFFSET,
 		LARB2_PORT_OFFSET, LARB3_PORT_OFFSET
@@ -254,7 +243,6 @@ static void mtk_smi_larb_config_port_gen1(struct device *dev)
 };
 
 static const struct mtk_smi_larb_gen mtk_smi_larb_mt2712 = {
-	.need_larbid = true,
 	.config_port                = mtk_smi_larb_config_port_gen2_general,
 	.larb_direct_to_common_mask = BIT(8) | BIT(9),      /* bdpsys */
 };
@@ -293,7 +281,6 @@ static int mtk_smi_larb_probe(struct platform_device *pdev)
 	struct device *dev = &pdev->dev;
 	struct device_node *smi_node;
 	struct platform_device *smi_pdev;
-	int err;
 
 	larb = devm_kzalloc(dev, sizeof(*larb), GFP_KERNEL);
 	if (!larb)
@@ -323,15 +310,6 @@ static int mtk_smi_larb_probe(struct platform_device *pdev)
 	}
 	larb->smi.dev = dev;
 
-	if (larb->larb_gen->need_larbid) {
-		err = of_property_read_u32(dev->of_node, "mediatek,larb-id",
-					   &larb->larbid);
-		if (err) {
-			dev_err(dev, "missing larbid property\n");
-			return err;
-		}
-	}
-
 	smi_node = of_parse_phandle(dev->of_node, "mediatek,smi", 0);
 	if (!smi_node)
 		return -EINVAL;
diff --git a/include/soc/mediatek/smi.h b/include/soc/mediatek/smi.h
index 5201e90..a65324d 100644
--- a/include/soc/mediatek/smi.h
+++ b/include/soc/mediatek/smi.h
@@ -29,7 +29,6 @@ struct mtk_smi_larb_iommu {
 };
 
 struct mtk_smi_iommu {
-	unsigned int larb_nr;
 	struct mtk_smi_larb_iommu larb_imu[MTK_LARB_NR_MAX];
 };
 
-- 
1.9.1

[PATCH v8 20/21] iommu/mediatek: Clean up struct mtk_smi_iommu

[Yong Wu]

Remove the "struct mtk_smi_iommu" to simplify the code since it has only
one item in it right now.

Signed-off-by: Yong Wu <yong.wu@mediatek.com>
---
 drivers/iommu/mtk_iommu.c    | 4 ++--
 drivers/iommu/mtk_iommu.h    | 6 +++---
 drivers/iommu/mtk_iommu_v1.c | 4 ++--
 drivers/memory/mtk-smi.c     | 6 +++---
 include/soc/mediatek/smi.h   | 4 ----
 5 files changed, 10 insertions(+), 14 deletions(-)

diff --git a/drivers/iommu/mtk_iommu.c b/drivers/iommu/mtk_iommu.c
index fcf18d7..4212221 100644
--- a/drivers/iommu/mtk_iommu.c
+++ b/drivers/iommu/mtk_iommu.c
@@ -276,7 +276,7 @@ static void mtk_iommu_config(struct mtk_iommu_data *data,
 	for (i = 0; i < fwspec->num_ids; ++i) {
 		larbid = MTK_M4U_TO_LARB(fwspec->ids[i]);
 		portid = MTK_M4U_TO_PORT(fwspec->ids[i]);
-		larb_mmu = &data->smi_imu.larb_imu[larbid];
+		larb_mmu = &data->larb_imu[larbid];
 
 		dev_dbg(dev, "%s iommu port: %d\n",
 			enable ? "enable" : "disable", portid);
@@ -678,7 +678,7 @@ static int mtk_iommu_probe(struct platform_device *pdev)
 			of_node_put(larbnode);
 			return -EPROBE_DEFER;
 		}
-		data->smi_imu.larb_imu[id].dev = &plarbdev->dev;
+		data->larb_imu[id].dev = &plarbdev->dev;
 
 		component_match_add_release(dev, &match, release_of,
 					    compare_of, larbnode);
diff --git a/drivers/iommu/mtk_iommu.h b/drivers/iommu/mtk_iommu.h
index 3954876..dda74f1 100644
--- a/drivers/iommu/mtk_iommu.h
+++ b/drivers/iommu/mtk_iommu.h
@@ -64,7 +64,6 @@ struct mtk_iommu_data {
 	struct mtk_iommu_suspend_reg	reg;
 	struct mtk_iommu_domain		*m4u_dom;
 	struct iommu_group		*m4u_group;
-	struct mtk_smi_iommu		smi_imu;      /* SMI larb iommu info */
 	bool                            enable_4GB;
 	bool				tlb_flush_active;
 
@@ -72,6 +71,7 @@ struct mtk_iommu_data {
 	const struct mtk_iommu_plat_data *plat_data;
 
 	struct list_head		list;
+	struct mtk_smi_larb_iommu	larb_imu[MTK_LARB_NR_MAX];
 };
 
 static inline int compare_of(struct device *dev, void *data)
@@ -88,14 +88,14 @@ static inline int mtk_iommu_bind(struct device *dev)
 {
 	struct mtk_iommu_data *data = dev_get_drvdata(dev);
 
-	return component_bind_all(dev, &data->smi_imu);
+	return component_bind_all(dev, &data->larb_imu);
 }
 
 static inline void mtk_iommu_unbind(struct device *dev)
 {
 	struct mtk_iommu_data *data = dev_get_drvdata(dev);
 
-	component_unbind_all(dev, &data->smi_imu);
+	component_unbind_all(dev, &data->larb_imu);
 }
 
 #endif
diff --git a/drivers/iommu/mtk_iommu_v1.c b/drivers/iommu/mtk_iommu_v1.c
index 73308ad..ba0408b 100644
--- a/drivers/iommu/mtk_iommu_v1.c
+++ b/drivers/iommu/mtk_iommu_v1.c
@@ -214,7 +214,7 @@ static void mtk_iommu_config(struct mtk_iommu_data *data,
 	for (i = 0; i < fwspec->num_ids; ++i) {
 		larbid = mt2701_m4u_to_larb(fwspec->ids[i]);
 		portid = mt2701_m4u_to_port(fwspec->ids[i]);
-		larb_mmu = &data->smi_imu.larb_imu[larbid];
+		larb_mmu = &data->larb_imu[larbid];
 
 		dev_dbg(dev, "%s iommu port: %d\n",
 			enable ? "enable" : "disable", portid);
@@ -618,7 +618,7 @@ static int mtk_iommu_probe(struct platform_device *pdev)
 			}
 		}
 
-		data->smi_imu.larb_imu[larb_nr].dev = &plarbdev->dev;
+		data->larb_imu[larb_nr].dev = &plarbdev->dev;
 		component_match_add_release(dev, &match, release_of,
 					    compare_of, larb_spec.np);
 		larb_nr++;
diff --git a/drivers/memory/mtk-smi.c b/drivers/memory/mtk-smi.c
index 7d13a0b..0e310d5 100644
--- a/drivers/memory/mtk-smi.c
+++ b/drivers/memory/mtk-smi.c
@@ -151,13 +151,13 @@ void mtk_smi_larb_put(struct device *larbdev)
 mtk_smi_larb_bind(struct device *dev, struct device *master, void *data)
 {
 	struct mtk_smi_larb *larb = dev_get_drvdata(dev);
-	struct mtk_smi_iommu *smi_iommu = data;
+	struct mtk_smi_larb_iommu *larb_mmu = data;
 	unsigned int         i;
 
 	for (i = 0; i < MTK_LARB_NR_MAX; i++) {
-		if (dev == smi_iommu->larb_imu[i].dev) {
+		if (dev == larb_mmu[i].dev) {
 			larb->larbid = i;
-			larb->mmu = &smi_iommu->larb_imu[i].mmu;
+			larb->mmu = &larb_mmu[i].mmu;
 			return 0;
 		}
 	}
diff --git a/include/soc/mediatek/smi.h b/include/soc/mediatek/smi.h
index a65324d..baad22f 100644
--- a/include/soc/mediatek/smi.h
+++ b/include/soc/mediatek/smi.h
@@ -28,10 +28,6 @@ struct mtk_smi_larb_iommu {
 	unsigned int   mmu;
 };
 
-struct mtk_smi_iommu {
-	struct mtk_smi_larb_iommu larb_imu[MTK_LARB_NR_MAX];
-};
-
 /*
  * mtk_smi_larb_get: Enable the power domain and clocks for this local arbiter.
  *                   It also initialize some basic setting(like iommu).
-- 
1.9.1

[PATCH v8 21/21] iommu/mediatek: Switch to SPDX license identifier

[Yong Wu]

Switch to SPDX license identifier for MediaTek iommu/smi and their
header files.

Signed-off-by: Yong Wu <yong.wu@mediatek.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Evan Green <evgreen@chromium.org>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
---
 drivers/iommu/mtk_iommu.c                     | 10 +---------
 drivers/iommu/mtk_iommu.h                     | 10 +---------
 drivers/iommu/mtk_iommu_v1.c                  | 10 +---------
 drivers/memory/mtk-smi.c                      | 10 +---------
 include/dt-bindings/memory/mt2701-larb-port.h | 10 +---------
 include/dt-bindings/memory/mt8173-larb-port.h | 10 +---------
 include/soc/mediatek/smi.h                    | 10 +---------
 7 files changed, 7 insertions(+), 63 deletions(-)

diff --git a/drivers/iommu/mtk_iommu.c b/drivers/iommu/mtk_iommu.c
index 4212221..f013b55 100644
--- a/drivers/iommu/mtk_iommu.c
+++ b/drivers/iommu/mtk_iommu.c
@@ -1,15 +1,7 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * Copyright (c) 2015-2016 MediaTek Inc.
  * Author: Yong Wu <yong.wu@mediatek.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
  */
 #include <linux/memblock.h>
 #include <linux/bug.h>
diff --git a/drivers/iommu/mtk_iommu.h b/drivers/iommu/mtk_iommu.h
index dda74f1..d5dd07f 100644
--- a/drivers/iommu/mtk_iommu.h
+++ b/drivers/iommu/mtk_iommu.h
@@ -1,15 +1,7 @@
+/* SPDX-License-Identifier: GPL-2.0 */
 /*
  * Copyright (c) 2015-2016 MediaTek Inc.
  * Author: Honghui Zhang <honghui.zhang@mediatek.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
  */
 
 #ifndef _MTK_IOMMU_H_
diff --git a/drivers/iommu/mtk_iommu_v1.c b/drivers/iommu/mtk_iommu_v1.c
index ba0408b..55013ba 100644
--- a/drivers/iommu/mtk_iommu_v1.c
+++ b/drivers/iommu/mtk_iommu_v1.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * IOMMU API for MTK architected m4u v1 implementations
  *
@@ -5,15 +6,6 @@
  * Author: Honghui Zhang <honghui.zhang@mediatek.com>
  *
  * Based on driver/iommu/mtk_iommu.c
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
  */
 #include <linux/memblock.h>
 #include <linux/bug.h>
diff --git a/drivers/memory/mtk-smi.c b/drivers/memory/mtk-smi.c
index 0e310d5..b754460 100644
--- a/drivers/memory/mtk-smi.c
+++ b/drivers/memory/mtk-smi.c
@@ -1,15 +1,7 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * Copyright (c) 2015-2016 MediaTek Inc.
  * Author: Yong Wu <yong.wu@mediatek.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
  */
 #include <linux/clk.h>
 #include <linux/component.h>
diff --git a/include/dt-bindings/memory/mt2701-larb-port.h b/include/dt-bindings/memory/mt2701-larb-port.h
index 6764d74..c511f0f 100644
--- a/include/dt-bindings/memory/mt2701-larb-port.h
+++ b/include/dt-bindings/memory/mt2701-larb-port.h
@@ -1,15 +1,7 @@
+/* SPDX-License-Identifier: GPL-2.0 */
 /*
  * Copyright (c) 2015 MediaTek Inc.
  * Author: Honghui Zhang <honghui.zhang@mediatek.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
  */
 
 #ifndef _MT2701_LARB_PORT_H_
diff --git a/include/dt-bindings/memory/mt8173-larb-port.h b/include/dt-bindings/memory/mt8173-larb-port.h
index 111b4b0..a62bfeb 100644
--- a/include/dt-bindings/memory/mt8173-larb-port.h
+++ b/include/dt-bindings/memory/mt8173-larb-port.h
@@ -1,15 +1,7 @@
+/* SPDX-License-Identifier: GPL-2.0 */
 /*
  * Copyright (c) 2015-2016 MediaTek Inc.
  * Author: Yong Wu <yong.wu@mediatek.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
  */
 #ifndef __DTS_IOMMU_PORT_MT8173_H
 #define __DTS_IOMMU_PORT_MT8173_H
diff --git a/include/soc/mediatek/smi.h b/include/soc/mediatek/smi.h
index baad22f..11074c6 100644
--- a/include/soc/mediatek/smi.h
+++ b/include/soc/mediatek/smi.h
@@ -1,15 +1,7 @@
+/* SPDX-License-Identifier: GPL-2.0 */
 /*
  * Copyright (c) 2015-2016 MediaTek Inc.
  * Author: Yong Wu <yong.wu@mediatek.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
  */
 #ifndef MTK_IOMMU_SMI_H
 #define MTK_IOMMU_SMI_H
-- 
1.9.1