* [PATCH v4 0/2] arm64: dts: nxp: add ls1046a frwy board support @ 2019-07-16 13:43 Pramod Kumar 2019-07-16 13:43 ` [PATCH v4 1/2] dt-bindings: arm: nxp: Add device tree binding for ls1046a-frwy board Pramod Kumar 2019-07-16 13:43 ` [PATCH v4 2/2] arm64: dts: nxp: add ls1046a-frwy board support Pramod Kumar 0 siblings, 2 replies; 5+ messages in thread From: Pramod Kumar @ 2019-07-16 13:43 UTC (permalink / raw) To: robh+dt, mark.rutland, shawnguo, manivannan.sadhasivam, Aisheng Dong, Michal.Vokac, Leo Li Cc: devicetree, linux-kernel, Pramod Kumar changes for v4: incorporated shawn review comment Pramod Kumar (2): dt-bindings: arm: nxp: Add device tree binding for ls1046a-frwy board arm64: dts: nxp: add ls1046a-frwy board support Documentation/devicetree/bindings/arm/fsl.yaml | 1 + arch/arm64/boot/dts/freescale/Makefile | 1 + arch/arm64/boot/dts/freescale/fsl-ls1046a-frwy.dts | 156 +++++++++++++++++++++ 3 files changed, 158 insertions(+) create mode 100644 arch/arm64/boot/dts/freescale/fsl-ls1046a-frwy.dts -- 2.7.4 ^ permalink raw reply [flat|nested] 5+ messages in thread
* [PATCH v4 1/2] dt-bindings: arm: nxp: Add device tree binding for ls1046a-frwy board 2019-07-16 13:43 [PATCH v4 0/2] arm64: dts: nxp: add ls1046a frwy board support Pramod Kumar @ 2019-07-16 13:43 ` Pramod Kumar 2019-07-23 6:50 ` Shawn Guo 2019-07-16 13:43 ` [PATCH v4 2/2] arm64: dts: nxp: add ls1046a-frwy board support Pramod Kumar 1 sibling, 1 reply; 5+ messages in thread From: Pramod Kumar @ 2019-07-16 13:43 UTC (permalink / raw) To: robh+dt, mark.rutland, shawnguo, manivannan.sadhasivam, Aisheng Dong, Michal.Vokac, Leo Li Cc: devicetree, linux-kernel, Pramod Kumar, Vabhav Sharma Add "fsl,ls1046a-frwy" bindings for ls1046afrwy board based on ls1046a SoC Signed-off-by: Vabhav Sharma <vabhav.sharma@nxp.com> Signed-off-by: Pramod Kumar <pramod.kumar_1@nxp.com> Reviewed-by: Rob Herring <robh@kernel.org> --- Documentation/devicetree/bindings/arm/fsl.yaml | 1 + 1 file changed, 1 insertion(+) diff --git a/Documentation/devicetree/bindings/arm/fsl.yaml b/Documentation/devicetree/bindings/arm/fsl.yaml index 407138e..86e9821 100644 --- a/Documentation/devicetree/bindings/arm/fsl.yaml +++ b/Documentation/devicetree/bindings/arm/fsl.yaml @@ -239,6 +239,7 @@ properties: - description: LS1046A based Boards items: - enum: + - fsl,ls1046a-frwy - fsl,ls1046a-qds - fsl,ls1046a-rdb - const: fsl,ls1046a -- 2.7.4 ^ permalink raw reply related [flat|nested] 5+ messages in thread
* Re: [PATCH v4 1/2] dt-bindings: arm: nxp: Add device tree binding for ls1046a-frwy board 2019-07-16 13:43 ` [PATCH v4 1/2] dt-bindings: arm: nxp: Add device tree binding for ls1046a-frwy board Pramod Kumar @ 2019-07-23 6:50 ` Shawn Guo 0 siblings, 0 replies; 5+ messages in thread From: Shawn Guo @ 2019-07-23 6:50 UTC (permalink / raw) To: Pramod Kumar Cc: robh+dt, mark.rutland, manivannan.sadhasivam, Aisheng Dong, Michal.Vokac, Leo Li, devicetree, linux-kernel, Vabhav Sharma On Tue, Jul 16, 2019 at 01:43:27PM +0000, Pramod Kumar wrote: > Add "fsl,ls1046a-frwy" bindings for ls1046afrwy board based on ls1046a SoC > > Signed-off-by: Vabhav Sharma <vabhav.sharma@nxp.com> > Signed-off-by: Pramod Kumar <pramod.kumar_1@nxp.com> > Reviewed-by: Rob Herring <robh@kernel.org> Applied, thanks. ^ permalink raw reply [flat|nested] 5+ messages in thread
* [PATCH v4 2/2] arm64: dts: nxp: add ls1046a-frwy board support 2019-07-16 13:43 [PATCH v4 0/2] arm64: dts: nxp: add ls1046a frwy board support Pramod Kumar 2019-07-16 13:43 ` [PATCH v4 1/2] dt-bindings: arm: nxp: Add device tree binding for ls1046a-frwy board Pramod Kumar @ 2019-07-16 13:43 ` Pramod Kumar 2019-07-23 6:52 ` Shawn Guo 1 sibling, 1 reply; 5+ messages in thread From: Pramod Kumar @ 2019-07-16 13:43 UTC (permalink / raw) To: robh+dt, mark.rutland, shawnguo, manivannan.sadhasivam, Aisheng Dong, Michal.Vokac, Leo Li Cc: devicetree, linux-kernel, Pramod Kumar, Vabhav Sharma ls1046afrwy board is based on nxp ls1046a SoC. Board support's 4GB ddr memory, i2c, microSD card, serial console,qspi nor flash,ifc nand flash,qsgmii network interface, usb 3.0 and serdes interface to support two x1gen3 pcie interface. Signed-off-by: Vabhav Sharma <vabhav.sharma@nxp.com> Signed-off-by: Pramod Kumar <pramod.kumar_1@nxp.com> --- arch/arm64/boot/dts/freescale/Makefile | 1 + arch/arm64/boot/dts/freescale/fsl-ls1046a-frwy.dts | 156 +++++++++++++++++++++ 2 files changed, 157 insertions(+) create mode 100644 arch/arm64/boot/dts/freescale/fsl-ls1046a-frwy.dts diff --git a/arch/arm64/boot/dts/freescale/Makefile b/arch/arm64/boot/dts/freescale/Makefile index 0bd122f..1211531 100644 --- a/arch/arm64/boot/dts/freescale/Makefile +++ b/arch/arm64/boot/dts/freescale/Makefile @@ -8,6 +8,7 @@ dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1028a-qds.dtb dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1028a-rdb.dtb dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1043a-qds.dtb dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1043a-rdb.dtb +dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1046a-frwy.dtb dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1046a-qds.dtb dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1046a-rdb.dtb dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1088a-qds.dtb diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1046a-frwy.dts b/arch/arm64/boot/dts/freescale/fsl-ls1046a-frwy.dts new file mode 100644 index 0000000..cda4998 --- /dev/null +++ b/arch/arm64/boot/dts/freescale/fsl-ls1046a-frwy.dts @@ -0,0 +1,156 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Device Tree Include file for Freescale Layerscape-1046A family SoC. + * + * Copyright 2019 NXP. + * + */ + +/dts-v1/; + +#include "fsl-ls1046a.dtsi" + +/ { + model = "LS1046A FRWY Board"; + compatible = "fsl,ls1046a-frwy", "fsl,ls1046a"; + + aliases { + serial0 = &duart0; + serial1 = &duart1; + serial2 = &duart2; + serial3 = &duart3; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + sb_3v3: regulator-sb3v3 { + compatible = "regulator-fixed"; + regulator-name = "LT8642SEV-3.3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; +}; + +&duart0 { + status = "okay"; +}; + +&duart1 { + status = "okay"; +}; + +&duart2 { + status = "okay"; +}; + +&duart3 { + status = "okay"; +}; + +&i2c0 { + status = "okay"; + + i2c-mux@77 { + compatible = "nxp,pca9546"; + reg = <0x77>; + #address-cells = <1>; + #size-cells = <0>; + + i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + + power-monitor@40 { + compatible = "ti,ina220"; + reg = <0x40>; + shunt-resistor = <1000>; + }; + + + temperature-sensor@4c { + compatible = "nxp,sa56004"; + reg = <0x4c>; + vcc-supply = <&sb_3v3>; + }; + + rtc@51 { + compatible = "nxp,pcf2129"; + reg = <0x51>; + }; + + eeprom@52 { + compatible = "atmel,24c512"; + reg = <0x52>; + }; + + eeprom@53 { + compatible = "atmel,24c512"; + reg = <0x53>; + }; + + }; + }; +}; + +&ifc { + #address-cells = <2>; + #size-cells = <1>; + /* NAND Flash */ + ranges = <0x0 0x0 0x0 0x7e800000 0x00010000>; + status = "okay"; + + nand@0,0 { + compatible = "fsl,ifc-nand"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x0 0x0 0x10000>; + }; + +}; + +#include "fsl-ls1046-post.dtsi" + +&fman0 { + ethernet@e0000 { + phy-handle = <&qsgmii_phy4>; + phy-connection-type = "qsgmii"; + }; + + ethernet@e8000 { + phy-handle = <&qsgmii_phy2>; + phy-connection-type = "qsgmii"; + }; + + ethernet@ea000 { + phy-handle = <&qsgmii_phy1>; + phy-connection-type = "qsgmii"; + }; + + ethernet@f2000 { + phy-handle = <&qsgmii_phy3>; + phy-connection-type = "qsgmii"; + }; + + mdio@fd000 { + qsgmii_phy1: ethernet-phy@1c { + reg = <0x1c>; + }; + + qsgmii_phy2: ethernet-phy@1d { + reg = <0x1d>; + }; + + qsgmii_phy3: ethernet-phy@1e { + reg = <0x1e>; + }; + + qsgmii_phy4: ethernet-phy@1f { + reg = <0x1f>; + }; + }; +}; -- 2.7.4 ^ permalink raw reply related [flat|nested] 5+ messages in thread
* Re: [PATCH v4 2/2] arm64: dts: nxp: add ls1046a-frwy board support 2019-07-16 13:43 ` [PATCH v4 2/2] arm64: dts: nxp: add ls1046a-frwy board support Pramod Kumar @ 2019-07-23 6:52 ` Shawn Guo 0 siblings, 0 replies; 5+ messages in thread From: Shawn Guo @ 2019-07-23 6:52 UTC (permalink / raw) To: Pramod Kumar Cc: robh+dt, mark.rutland, manivannan.sadhasivam, Aisheng Dong, Michal.Vokac, Leo Li, devicetree, linux-kernel, Vabhav Sharma On Tue, Jul 16, 2019 at 01:43:31PM +0000, Pramod Kumar wrote: > ls1046afrwy board is based on nxp ls1046a SoC. > Board support's 4GB ddr memory, i2c, microSD card, > serial console,qspi nor flash,ifc nand flash,qsgmii network interface, > usb 3.0 and serdes interface to support two x1gen3 pcie interface. > > Signed-off-by: Vabhav Sharma <vabhav.sharma@nxp.com> > Signed-off-by: Pramod Kumar <pramod.kumar_1@nxp.com> > --- > arch/arm64/boot/dts/freescale/Makefile | 1 + > arch/arm64/boot/dts/freescale/fsl-ls1046a-frwy.dts | 156 +++++++++++++++++++++ > 2 files changed, 157 insertions(+) > create mode 100644 arch/arm64/boot/dts/freescale/fsl-ls1046a-frwy.dts > > diff --git a/arch/arm64/boot/dts/freescale/Makefile b/arch/arm64/boot/dts/freescale/Makefile > index 0bd122f..1211531 100644 > --- a/arch/arm64/boot/dts/freescale/Makefile > +++ b/arch/arm64/boot/dts/freescale/Makefile > @@ -8,6 +8,7 @@ dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1028a-qds.dtb > dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1028a-rdb.dtb > dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1043a-qds.dtb > dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1043a-rdb.dtb > +dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1046a-frwy.dtb > dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1046a-qds.dtb > dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1046a-rdb.dtb > dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1088a-qds.dtb > diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1046a-frwy.dts b/arch/arm64/boot/dts/freescale/fsl-ls1046a-frwy.dts > new file mode 100644 > index 0000000..cda4998 > --- /dev/null > +++ b/arch/arm64/boot/dts/freescale/fsl-ls1046a-frwy.dts > @@ -0,0 +1,156 @@ > +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) > +/* > + * Device Tree Include file for Freescale Layerscape-1046A family SoC. > + * > + * Copyright 2019 NXP. > + * > + */ > + > +/dts-v1/; > + > +#include "fsl-ls1046a.dtsi" > + > +/ { > + model = "LS1046A FRWY Board"; > + compatible = "fsl,ls1046a-frwy", "fsl,ls1046a"; > + > + aliases { > + serial0 = &duart0; > + serial1 = &duart1; > + serial2 = &duart2; > + serial3 = &duart3; > + }; > + > + chosen { > + stdout-path = "serial0:115200n8"; > + }; > + > + sb_3v3: regulator-sb3v3 { > + compatible = "regulator-fixed"; > + regulator-name = "LT8642SEV-3.3V"; > + regulator-min-microvolt = <3300000>; > + regulator-max-microvolt = <3300000>; > + regulator-boot-on; > + regulator-always-on; > + }; > +}; > + > +&duart0 { > + status = "okay"; > +}; > + > +&duart1 { > + status = "okay"; > +}; > + > +&duart2 { > + status = "okay"; > +}; > + > +&duart3 { > + status = "okay"; > +}; > + > +&i2c0 { > + status = "okay"; > + > + i2c-mux@77 { > + compatible = "nxp,pca9546"; > + reg = <0x77>; > + #address-cells = <1>; > + #size-cells = <0>; > + > + i2c@0 { > + #address-cells = <1>; > + #size-cells = <0>; > + reg = <0>; > + > + power-monitor@40 { > + compatible = "ti,ina220"; > + reg = <0x40>; > + shunt-resistor = <1000>; > + }; > + > + One newline is good enough. I fixed it up and applied the patch. Shawn > + temperature-sensor@4c { > + compatible = "nxp,sa56004"; > + reg = <0x4c>; > + vcc-supply = <&sb_3v3>; > + }; > + > + rtc@51 { > + compatible = "nxp,pcf2129"; > + reg = <0x51>; > + }; > + > + eeprom@52 { > + compatible = "atmel,24c512"; > + reg = <0x52>; > + }; > + > + eeprom@53 { > + compatible = "atmel,24c512"; > + reg = <0x53>; > + }; > + > + }; > + }; > +}; > + > +&ifc { > + #address-cells = <2>; > + #size-cells = <1>; > + /* NAND Flash */ > + ranges = <0x0 0x0 0x0 0x7e800000 0x00010000>; > + status = "okay"; > + > + nand@0,0 { > + compatible = "fsl,ifc-nand"; > + #address-cells = <1>; > + #size-cells = <1>; > + reg = <0x0 0x0 0x10000>; > + }; > + > +}; > + > +#include "fsl-ls1046-post.dtsi" > + > +&fman0 { > + ethernet@e0000 { > + phy-handle = <&qsgmii_phy4>; > + phy-connection-type = "qsgmii"; > + }; > + > + ethernet@e8000 { > + phy-handle = <&qsgmii_phy2>; > + phy-connection-type = "qsgmii"; > + }; > + > + ethernet@ea000 { > + phy-handle = <&qsgmii_phy1>; > + phy-connection-type = "qsgmii"; > + }; > + > + ethernet@f2000 { > + phy-handle = <&qsgmii_phy3>; > + phy-connection-type = "qsgmii"; > + }; > + > + mdio@fd000 { > + qsgmii_phy1: ethernet-phy@1c { > + reg = <0x1c>; > + }; > + > + qsgmii_phy2: ethernet-phy@1d { > + reg = <0x1d>; > + }; > + > + qsgmii_phy3: ethernet-phy@1e { > + reg = <0x1e>; > + }; > + > + qsgmii_phy4: ethernet-phy@1f { > + reg = <0x1f>; > + }; > + }; > +}; > -- > 2.7.4 > ^ permalink raw reply [flat|nested] 5+ messages in thread
end of thread, other threads:[~2019-07-23 6:52 UTC | newest] Thread overview: 5+ messages (download: mbox.gz / follow: Atom feed) -- links below jump to the message on this page -- 2019-07-16 13:43 [PATCH v4 0/2] arm64: dts: nxp: add ls1046a frwy board support Pramod Kumar 2019-07-16 13:43 ` [PATCH v4 1/2] dt-bindings: arm: nxp: Add device tree binding for ls1046a-frwy board Pramod Kumar 2019-07-23 6:50 ` Shawn Guo 2019-07-16 13:43 ` [PATCH v4 2/2] arm64: dts: nxp: add ls1046a-frwy board support Pramod Kumar 2019-07-23 6:52 ` Shawn Guo
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).