[PATCH] arm64: dts: imx8mm: Enable cpu-idle driver

[PATCH] arm64: dts: imx8mm: Enable cpu-idle driver

[Anson Huang]

Enable i.MX8MM cpu-idle using generic ARM cpu-idle driver, 2 states
are supported, details as below:

root@imx8mmevk:~# cat /sys/devices/system/cpu/cpu0/cpuidle/state0/name
WFI
root@imx8mmevk:~# cat /sys/devices/system/cpu/cpu0/cpuidle/state0/usage
3973
root@imx8mmevk:~# cat /sys/devices/system/cpu/cpu0/cpuidle/state1/name
cpu-pd-wait
root@imx8mmevk:~# cat /sys/devices/system/cpu/cpu0/cpuidle/state1/usage
6647

Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
---
 arch/arm64/boot/dts/freescale/imx8mm.dtsi | 17 +++++++++++++++++
 1 file changed, 17 insertions(+)

diff --git a/arch/arm64/boot/dts/freescale/imx8mm.dtsi b/arch/arm64/boot/dts/freescale/imx8mm.dtsi
index e8560d1..984ea7b 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mm.dtsi
@@ -44,6 +44,19 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 
+		idle-states {
+			entry-method = "psci";
+
+			cpu_pd_wait: cpu-pd-wait {
+				compatible = "arm,idle-state";
+				arm,psci-suspend-param = <0x0010033>;
+				local-timer-stop;
+				entry-latency-us = <1000>;
+				exit-latency-us = <700>;
+				min-residency-us = <2700>;
+			};
+		};
+
 		A53_0: cpu@0 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a53";
@@ -55,6 +68,7 @@
 			operating-points-v2 = <&a53_opp_table>;
 			nvmem-cells = <&cpu_speed_grade>;
 			nvmem-cell-names = "speed_grade";
+			cpu-idle-states = <&cpu_pd_wait>;
 		};
 
 		A53_1: cpu@1 {
@@ -66,6 +80,7 @@
 			enable-method = "psci";
 			next-level-cache = <&A53_L2>;
 			operating-points-v2 = <&a53_opp_table>;
+			cpu-idle-states = <&cpu_pd_wait>;
 		};
 
 		A53_2: cpu@2 {
@@ -77,6 +92,7 @@
 			enable-method = "psci";
 			next-level-cache = <&A53_L2>;
 			operating-points-v2 = <&a53_opp_table>;
+			cpu-idle-states = <&cpu_pd_wait>;
 		};
 
 		A53_3: cpu@3 {
@@ -88,6 +104,7 @@
 			enable-method = "psci";
 			next-level-cache = <&A53_L2>;
 			operating-points-v2 = <&a53_opp_table>;
+			cpu-idle-states = <&cpu_pd_wait>;
 		};
 
 		A53_L2: l2-cache0 {
-- 
2.7.4

Re: [PATCH] arm64: dts: imx8mm: Enable cpu-idle driver

[Shawn Guo]

On Fri, Aug 16, 2019 at 06:13:03AM -0400, Anson Huang wrote:
> Enable i.MX8MM cpu-idle using generic ARM cpu-idle driver, 2 states
> are supported, details as below:
> 
> root@imx8mmevk:~# cat /sys/devices/system/cpu/cpu0/cpuidle/state0/name
> WFI
> root@imx8mmevk:~# cat /sys/devices/system/cpu/cpu0/cpuidle/state0/usage
> 3973
> root@imx8mmevk:~# cat /sys/devices/system/cpu/cpu0/cpuidle/state1/name
> cpu-pd-wait
> root@imx8mmevk:~# cat /sys/devices/system/cpu/cpu0/cpuidle/state1/usage
> 6647
> 
> Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
> Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>

Applied, thanks.