* [PATCH] net: phylink: Fix flow control resolution
@ 2019-09-05 16:46 stefanc
2019-09-05 16:59 ` Russell King - ARM Linux admin
2019-09-07 15:27 ` David Miller
0 siblings, 2 replies; 3+ messages in thread
From: stefanc @ 2019-09-05 16:46 UTC (permalink / raw)
To: davem
Cc: linux, andrew, netdev, linux-kernel, stefanc, shaulb, nadavh,
ymarkman, marcin
From: Stefan Chulski <stefanc@marvell.com>
Regarding to IEEE 802.3-2015 standard section 2
28B.3 Priority resolution - Table 28-3 - Pause resolution
In case of Local device Pause=1 AsymDir=0, Link partner
Pause=1 AsymDir=1, Local device resolution should be enable PAUSE
transmit, disable PAUSE receive.
And in case of Local device Pause=1 AsymDir=1, Link partner
Pause=1 AsymDir=0, Local device resolution should be enable PAUSE
receive, disable PAUSE transmit.
Signed-off-by: Stefan Chulski <stefanc@marvell.com>
Reported-by: Shaul Ben-Mayor <shaulb@marvell.com>
---
drivers/net/phy/phylink.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/drivers/net/phy/phylink.c b/drivers/net/phy/phylink.c
index a45c5de..a5a57ca 100644
--- a/drivers/net/phy/phylink.c
+++ b/drivers/net/phy/phylink.c
@@ -376,8 +376,8 @@ static void phylink_get_fixed_state(struct phylink *pl, struct phylink_link_stat
* Local device Link partner
* Pause AsymDir Pause AsymDir Result
* 1 X 1 X TX+RX
- * 0 1 1 1 RX
- * 1 1 0 1 TX
+ * 0 1 1 1 TX
+ * 1 1 0 1 RX
*/
static void phylink_resolve_flow(struct phylink *pl,
struct phylink_link_state *state)
@@ -398,7 +398,7 @@ static void phylink_resolve_flow(struct phylink *pl,
new_pause = MLO_PAUSE_TX | MLO_PAUSE_RX;
else if (pause & MLO_PAUSE_ASYM)
new_pause = state->pause & MLO_PAUSE_SYM ?
- MLO_PAUSE_RX : MLO_PAUSE_TX;
+ MLO_PAUSE_TX : MLO_PAUSE_RX;
} else {
new_pause = pl->link_config.pause & MLO_PAUSE_TXRX_MASK;
}
--
1.9.1
^ permalink raw reply related [flat|nested] 3+ messages in thread* Re: [PATCH] net: phylink: Fix flow control resolution
2019-09-05 16:46 [PATCH] net: phylink: Fix flow control resolution stefanc
@ 2019-09-05 16:59 ` Russell King - ARM Linux admin
2019-09-07 15:27 ` David Miller
1 sibling, 0 replies; 3+ messages in thread
From: Russell King - ARM Linux admin @ 2019-09-05 16:59 UTC (permalink / raw)
To: stefanc
Cc: davem, andrew, netdev, linux-kernel, shaulb, nadavh, ymarkman, marcin
On Thu, Sep 05, 2019 at 07:46:18PM +0300, stefanc@marvell.com wrote:
> From: Stefan Chulski <stefanc@marvell.com>
>
> Regarding to IEEE 802.3-2015 standard section 2
> 28B.3 Priority resolution - Table 28-3 - Pause resolution
>
> In case of Local device Pause=1 AsymDir=0, Link partner
> Pause=1 AsymDir=1, Local device resolution should be enable PAUSE
> transmit, disable PAUSE receive.
> And in case of Local device Pause=1 AsymDir=1, Link partner
> Pause=1 AsymDir=0, Local device resolution should be enable PAUSE
> receive, disable PAUSE transmit.
>
> Signed-off-by: Stefan Chulski <stefanc@marvell.com>
> Reported-by: Shaul Ben-Mayor <shaulb@marvell.com>
Good catch, thanks for the patch.
Acked-by: Russell King <rmk+kernel@armlinux.org.uk>
Fixes: 9525ae83959b ("phylink: add phylink infrastructure")
> ---
> drivers/net/phy/phylink.c | 6 +++---
> 1 file changed, 3 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/net/phy/phylink.c b/drivers/net/phy/phylink.c
> index a45c5de..a5a57ca 100644
> --- a/drivers/net/phy/phylink.c
> +++ b/drivers/net/phy/phylink.c
> @@ -376,8 +376,8 @@ static void phylink_get_fixed_state(struct phylink *pl, struct phylink_link_stat
> * Local device Link partner
> * Pause AsymDir Pause AsymDir Result
> * 1 X 1 X TX+RX
> - * 0 1 1 1 RX
> - * 1 1 0 1 TX
> + * 0 1 1 1 TX
> + * 1 1 0 1 RX
> */
> static void phylink_resolve_flow(struct phylink *pl,
> struct phylink_link_state *state)
> @@ -398,7 +398,7 @@ static void phylink_resolve_flow(struct phylink *pl,
> new_pause = MLO_PAUSE_TX | MLO_PAUSE_RX;
> else if (pause & MLO_PAUSE_ASYM)
> new_pause = state->pause & MLO_PAUSE_SYM ?
> - MLO_PAUSE_RX : MLO_PAUSE_TX;
> + MLO_PAUSE_TX : MLO_PAUSE_RX;
> } else {
> new_pause = pl->link_config.pause & MLO_PAUSE_TXRX_MASK;
> }
> --
> 1.9.1
>
>
--
RMK's Patch system: https://www.armlinux.org.uk/developer/patches/
FTTC broadband for 0.8mile line in suburbia: sync at 12.1Mbps down 622kbps up
According to speedtest.net: 11.9Mbps down 500kbps up
^ permalink raw reply [flat|nested] 3+ messages in thread* Re: [PATCH] net: phylink: Fix flow control resolution
2019-09-05 16:46 [PATCH] net: phylink: Fix flow control resolution stefanc
2019-09-05 16:59 ` Russell King - ARM Linux admin
@ 2019-09-07 15:27 ` David Miller
1 sibling, 0 replies; 3+ messages in thread
From: David Miller @ 2019-09-07 15:27 UTC (permalink / raw)
To: stefanc
Cc: linux, andrew, netdev, linux-kernel, shaulb, nadavh, ymarkman, marcin
From: <stefanc@marvell.com>
Date: Thu, 5 Sep 2019 19:46:18 +0300
> From: Stefan Chulski <stefanc@marvell.com>
>
> Regarding to IEEE 802.3-2015 standard section 2
> 28B.3 Priority resolution - Table 28-3 - Pause resolution
>
> In case of Local device Pause=1 AsymDir=0, Link partner
> Pause=1 AsymDir=1, Local device resolution should be enable PAUSE
> transmit, disable PAUSE receive.
> And in case of Local device Pause=1 AsymDir=1, Link partner
> Pause=1 AsymDir=0, Local device resolution should be enable PAUSE
> receive, disable PAUSE transmit.
>
> Signed-off-by: Stefan Chulski <stefanc@marvell.com>
> Reported-by: Shaul Ben-Mayor <shaulb@marvell.com>
Applied and queued up for -stable, thanks.
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2019-09-07 15:27 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-09-05 16:46 [PATCH] net: phylink: Fix flow control resolution stefanc
2019-09-05 16:59 ` Russell King - ARM Linux admin
2019-09-07 15:27 ` David Miller
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).