From: Ashish Kumar <Ashish.Kumar@nxp.com>
To: devicetree@vger.kernel.org, robh@kernel.org,
mark.rutland@arm.com, shawnguo@kernel.org
Cc: linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org, Ashish Kumar <Ashish.Kumar@nxp.com>,
Kuldeep Singh <kuldeep.singh@nxp.com>
Subject: [PATCH] arm64: dts: ls1088a: Add QSPI support for NXP LS1088
Date: Tue, 10 Sep 2019 17:50:54 +0530 [thread overview]
Message-ID: <1568118055-9740-4-git-send-email-Ashish.Kumar@nxp.com> (raw)
In-Reply-To: <1568118055-9740-1-git-send-email-Ashish.Kumar@nxp.com>
Add QSPI node in dtsi(ls1088si), and dts(ls1088ardb, ls1088aqds) boards.
Both ls1088ardb and ls1088aqds has two 64MB flash from SPANSION(s25fs512s).
QUAD I/O is tested in case of read and single I/O is tested in case of
write.
Signed-off-by: Kuldeep Singh <kuldeep.singh@nxp.com>
Signed-off-by: Ashish Kumar <Ashish.Kumar@nxp.com>
---
arch/arm64/boot/dts/freescale/fsl-ls1088a-qds.dts | 26 +++++++++++++++++++++++
arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts | 26 +++++++++++++++++++++++
arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi | 13 ++++++++++++
3 files changed, 65 insertions(+)
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1088a-qds.dts b/arch/arm64/boot/dts/freescale/fsl-ls1088a-qds.dts
index 120e62d..3347e6a 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1088a-qds.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1088a-qds.dts
@@ -143,6 +143,32 @@
status = "okay";
};
+&qspi {
+ status = "okay";
+
+ qflash0: s25fs512s@0 {
+ compatible = "spansion,s25fs512a", "jedec,spi-nor";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ m25p,fast-read;
+ spi-max-frequency = <50000000>;
+ spi-rx-bus-width = <4>;
+ spi-tx-bus-width = <4>;
+ reg = <0>;
+ };
+
+ qflash1: s25fs512s@1 {
+ compatible = "spansion,s25fs512a", "jedec,spi-nor";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ m25p,fast-read;
+ spi-max-frequency = <50000000>;
+ spi-rx-bus-width = <4>;
+ spi-tx-bus-width = <4>;
+ reg = <1>;
+ };
+};
+
&sata {
status = "okay";
};
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts
index 8e925df..09d3203 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts
@@ -86,6 +86,32 @@
status = "okay";
};
+&qspi {
+ status = "okay";
+
+ qflash0: s25fs512s@0 {
+ compatible = "spansion,s25fs512a", "jedec,spi-nor";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ m25p,fast-read;
+ spi-max-frequency = <50000000>;
+ spi-rx-bus-width = <4>;
+ spi-tx-bus-width = <4>;
+ reg = <0>;
+ };
+
+ qflash1: s25fs512s@1 {
+ compatible = "spansion,s25fs512a", "jedec,spi-nor";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ m25p,fast-read;
+ spi-max-frequency = <50000000>;
+ spi-rx-bus-width = <4>;
+ spi-tx-bus-width = <4>;
+ reg = <1>;
+ };
+};
+
&sata {
status = "okay";
};
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi
index d1469b0..5a81a7e 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi
@@ -408,6 +408,19 @@
status = "disabled";
};
+ qspi: spi@20c0000 {
+ compatible = "fsl,ls2080a-qspi", "fsl,ls1088a-qspi";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x0 0x20c0000 0x0 0x10000>,
+ <0x0 0x20000000 0x0 0x10000000>;
+ reg-names = "QuadSPI", "QuadSPI-memory";
+ interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
+ clock-names = "qspi_en", "qspi";
+ clocks = <&clockgen 4 3>, <&clockgen 4 3>;
+ status = "disabled";
+ };
+
sata: sata@3200000 {
compatible = "fsl,ls1088a-ahci";
reg = <0x0 0x3200000 0x0 0x10000>,
--
2.7.4
next prev parent reply other threads:[~2019-09-10 12:21 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-09-10 12:20 [PATCH] arm64: dts: ls1028a: Add FlexSPI support for NXP LS1028 Ashish Kumar
2019-09-10 12:20 ` [PATCH] arm64: dts: ls1046a: Add QSPI node for ls1046afrwy Ashish Kumar
2019-09-10 12:20 ` [PATCH] arm64: dts: ls1046a: Append missing properties of QSPI node on ls1046ardb Ashish Kumar
2019-09-10 12:20 ` Ashish Kumar [this message]
2019-09-10 12:20 ` [PATCH] arm64: dts: ls208x: Remove non-compatible driver device from qspi node Ashish Kumar
2019-10-06 3:20 ` [PATCH] arm64: dts: ls1028a: Add FlexSPI support for NXP LS1028 Shawn Guo
2019-10-08 8:03 ` Xiaowei Bao
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1568118055-9740-4-git-send-email-Ashish.Kumar@nxp.com \
--to=ashish.kumar@nxp.com \
--cc=devicetree@vger.kernel.org \
--cc=kuldeep.singh@nxp.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=robh@kernel.org \
--cc=shawnguo@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).