linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Lina Iyer <ilina@codeaurora.org>
To: swboyd@chromium.org, evgreen@chromium.org, maz@kernel.org,
	linus.walleij@linaro.org
Cc: linux-kernel@vger.kernel.org, linux-arm-msm@vger.kernel.org,
	bjorn.andersson@linaro.org, mkshah@codeaurora.org,
	linux-gpio@vger.kernel.org, Lina Iyer <ilina@codeaurora.org>
Subject: [PATCH RFC v2 03/14] drivers: irqchip: pdc: Do not toggle IRQ_ENABLE during mask/unmask
Date: Fri, 13 Sep 2019 15:59:11 -0600	[thread overview]
Message-ID: <1568411962-1022-4-git-send-email-ilina@codeaurora.org> (raw)
In-Reply-To: <1568411962-1022-1-git-send-email-ilina@codeaurora.org>

When an interrupt is to be serviced, the convention is to mask the
interrupt at the chip and unmask after servicing the interrupt. Enabling
and disabling the interrupt at the PDC irqchip causes an interrupt storm
due to the way dual edge interrupts are handled in hardware.

Skip configuring the PDC when the IRQ is masked and unmasked, instead
use the irq_enable/irq_disable callbacks to toggle the IRQ_ENABLE
register at the PDC. The PDC's IRQ_ENABLE register is only used during
the monitoring mode when the system is asleep and is not needed for
active mode detection.

Signed-off-by: Lina Iyer <ilina@codeaurora.org>
---
 drivers/irqchip/qcom-pdc.c | 16 ++++++++++++++--
 1 file changed, 14 insertions(+), 2 deletions(-)

diff --git a/drivers/irqchip/qcom-pdc.c b/drivers/irqchip/qcom-pdc.c
index b230794..5eef5ea 100644
--- a/drivers/irqchip/qcom-pdc.c
+++ b/drivers/irqchip/qcom-pdc.c
@@ -63,15 +63,25 @@ static void pdc_enable_intr(struct irq_data *d, bool on)
 	raw_spin_unlock(&pdc_lock);
 }
 
-static void qcom_pdc_gic_mask(struct irq_data *d)
+static void qcom_pdc_gic_disable(struct irq_data *d)
 {
 	pdc_enable_intr(d, false);
+	irq_chip_disable_parent(d);
+}
+
+static void qcom_pdc_gic_enable(struct irq_data *d)
+{
+	pdc_enable_intr(d, true);
+	irq_chip_enable_parent(d);
+}
+
+static void qcom_pdc_gic_mask(struct irq_data *d)
+{
 	irq_chip_mask_parent(d);
 }
 
 static void qcom_pdc_gic_unmask(struct irq_data *d)
 {
-	pdc_enable_intr(d, true);
 	irq_chip_unmask_parent(d);
 }
 
@@ -148,6 +158,8 @@ static struct irq_chip qcom_pdc_gic_chip = {
 	.irq_eoi		= irq_chip_eoi_parent,
 	.irq_mask		= qcom_pdc_gic_mask,
 	.irq_unmask		= qcom_pdc_gic_unmask,
+	.irq_disable		= qcom_pdc_gic_disable,
+	.irq_enable		= qcom_pdc_gic_enable,
 	.irq_retrigger		= irq_chip_retrigger_hierarchy,
 	.irq_set_type		= qcom_pdc_gic_set_type,
 	.flags			= IRQCHIP_MASK_ON_SUSPEND |
-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project


  parent reply	other threads:[~2019-09-13 22:00 UTC|newest]

Thread overview: 32+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-09-13 21:59 [PATCH RFC v2 00/14] Support wakeup capable GPIOs Lina Iyer
2019-09-13 21:59 ` [PATCH RFC v2 01/14] irqdomain: add bus token DOMAIN_BUS_WAKEUP Lina Iyer
2019-09-13 21:59 ` [PATCH RFC v2 02/14] drivers: irqchip: qcom-pdc: update max PDC interrupts Lina Iyer
2019-09-13 21:59 ` Lina Iyer [this message]
2019-09-13 21:59 ` [PATCH RFC v2 04/14] drivers: irqchip: add PDC irqdomain for wakeup capable GPIOs Lina Iyer
2019-11-08 21:21   ` Doug Anderson
2019-11-08 21:54     ` Lina Iyer
2019-11-08 22:16       ` Lina Iyer
2019-11-08 22:57         ` Doug Anderson
2019-11-08 23:14           ` Lina Iyer
2019-09-13 21:59 ` [PATCH RFC v2 05/14] of: irq: document properties for wakeup interrupt parent Lina Iyer
2019-10-03 12:02   ` Linus Walleij
2019-11-08 21:29   ` Doug Anderson
2019-09-13 21:59 ` [PATCH RFC v2 06/14] dt-bindings/interrupt-controller: pdc: add SPI config register Lina Iyer
2019-09-30 22:14   ` Rob Herring
2019-09-30 22:33   ` Stephen Boyd
2019-10-16  6:27     ` Stephen Boyd
2019-11-05 20:58       ` Lina Iyer
2019-11-06  0:53         ` Stephen Boyd
2019-11-11 18:37           ` Lina Iyer
2019-11-12 11:52             ` Marc Zyngier
2019-09-13 21:59 ` [PATCH RFC v2 07/14] drivers: irqchip: pdc: additionally set type in SPI config registers Lina Iyer
2019-09-13 21:59 ` [PATCH RFC v2 08/14] genirq: Introduce irq_chip_get/set_parent_state calls Lina Iyer
2019-09-13 21:59 ` [PATCH RFC v2 09/14] drivers: irqchip: pdc: Add irqchip set/get state calls Lina Iyer
2019-09-13 21:59 ` [PATCH RFC v2 10/14] drivers: pinctrl: msm: setup GPIO chip in hierarchy Lina Iyer
2019-10-03 12:17   ` Linus Walleij
2019-11-13 18:35     ` Lina Iyer
2019-09-13 21:59 ` [PATCH RFC v2 11/14] drivers: pinctrl: sdm845: add PDC wakeup interrupt map for GPIOs Lina Iyer
2019-10-03 12:18   ` Linus Walleij
2019-09-13 21:59 ` [PATCH RFC v2 12/14] arm64: dts: qcom: add PDC interrupt controller for SDM845 Lina Iyer
2019-09-13 21:59 ` [PATCH RFC v2 13/14] arm64: dts: qcom: setup PDC as the wakeup parent for TLMM on SDM845 Lina Iyer
2019-09-13 21:59 ` [PATCH RFC v2 14/14] arm64: defconfig: enable PDC interrupt controller for Qualcomm SDM845 Lina Iyer

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1568411962-1022-4-git-send-email-ilina@codeaurora.org \
    --to=ilina@codeaurora.org \
    --cc=bjorn.andersson@linaro.org \
    --cc=evgreen@chromium.org \
    --cc=linus.walleij@linaro.org \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-gpio@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=maz@kernel.org \
    --cc=mkshah@codeaurora.org \
    --cc=swboyd@chromium.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).