linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Lina Iyer <ilina@codeaurora.org>
To: swboyd@chromium.org, evgreen@chromium.org, maz@kernel.org,
	linus.walleij@linaro.org
Cc: linux-kernel@vger.kernel.org, linux-arm-msm@vger.kernel.org,
	bjorn.andersson@linaro.org, mkshah@codeaurora.org,
	linux-gpio@vger.kernel.org, Lina Iyer <ilina@codeaurora.org>
Subject: [PATCH RFC v2 04/14] drivers: irqchip: add PDC irqdomain for wakeup capable GPIOs
Date: Fri, 13 Sep 2019 15:59:12 -0600	[thread overview]
Message-ID: <1568411962-1022-5-git-send-email-ilina@codeaurora.org> (raw)
In-Reply-To: <1568411962-1022-1-git-send-email-ilina@codeaurora.org>

Introduce a new domain for wakeup capable GPIOs. The domain can be
requested using the bus token DOMAIN_BUS_WAKEUP. In the following
patches, we will specify PDC as the wakeup-parent for the TLMM GPIO
irqchip. Requesting a wakeup GPIO will setup the GPIO and the
corresponding PDC interrupt as its parent.

Co-developed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Lina Iyer <ilina@codeaurora.org>
---
Changes in RFC v2:
	- Move irq_domain_qcom_handle_wakeup to the patch where it is
	used
	- Replace #define definitons
	- Add Signed-off-by and other minor changes
---
 drivers/irqchip/qcom-pdc.c   | 104 +++++++++++++++++++++++++++++++++++++++----
 include/linux/soc/qcom/irq.h |  19 ++++++++
 2 files changed, 114 insertions(+), 9 deletions(-)
 create mode 100644 include/linux/soc/qcom/irq.h

diff --git a/drivers/irqchip/qcom-pdc.c b/drivers/irqchip/qcom-pdc.c
index 5eef5ea..4abd775 100644
--- a/drivers/irqchip/qcom-pdc.c
+++ b/drivers/irqchip/qcom-pdc.c
@@ -13,12 +13,13 @@
 #include <linux/of.h>
 #include <linux/of_address.h>
 #include <linux/of_device.h>
+#include <linux/soc/qcom/irq.h>
 #include <linux/spinlock.h>
-#include <linux/platform_device.h>
 #include <linux/slab.h>
 #include <linux/types.h>
 
 #define PDC_MAX_IRQS		168
+#define PDC_MAX_GPIO_IRQS	256
 
 #define CLEAR_INTR(reg, intr)	(reg & ~(1 << intr))
 #define ENABLE_INTR(reg, intr)	(reg | (1 << intr))
@@ -26,6 +27,8 @@
 #define IRQ_ENABLE_BANK		0x10
 #define IRQ_i_CFG		0x110
 
+#define PDC_NO_PARENT_IRQ	~0UL
+
 struct pdc_pin_region {
 	u32 pin_base;
 	u32 parent_base;
@@ -65,23 +68,35 @@ static void pdc_enable_intr(struct irq_data *d, bool on)
 
 static void qcom_pdc_gic_disable(struct irq_data *d)
 {
+	if (d->hwirq == GPIO_NO_WAKE_IRQ)
+		return;
+
 	pdc_enable_intr(d, false);
 	irq_chip_disable_parent(d);
 }
 
 static void qcom_pdc_gic_enable(struct irq_data *d)
 {
+	if (d->hwirq == GPIO_NO_WAKE_IRQ)
+		return;
+
 	pdc_enable_intr(d, true);
 	irq_chip_enable_parent(d);
 }
 
 static void qcom_pdc_gic_mask(struct irq_data *d)
 {
+	if (d->hwirq == GPIO_NO_WAKE_IRQ)
+		return;
+
 	irq_chip_mask_parent(d);
 }
 
 static void qcom_pdc_gic_unmask(struct irq_data *d)
 {
+	if (d->hwirq == GPIO_NO_WAKE_IRQ)
+		return;
+
 	irq_chip_unmask_parent(d);
 }
 
@@ -124,6 +139,9 @@ static int qcom_pdc_gic_set_type(struct irq_data *d, unsigned int type)
 	int pin_out = d->hwirq;
 	enum pdc_irq_config_bits pdc_type;
 
+	if (pin_out == GPIO_NO_WAKE_IRQ)
+		return 0;
+
 	switch (type) {
 	case IRQ_TYPE_EDGE_RISING:
 		pdc_type = PDC_EDGE_RISING;
@@ -181,8 +199,7 @@ static irq_hw_number_t get_parent_hwirq(int pin)
 			return (region->parent_base + pin - region->pin_base);
 	}
 
-	WARN_ON(1);
-	return ~0UL;
+	return PDC_NO_PARENT_IRQ;
 }
 
 static int qcom_pdc_translate(struct irq_domain *d, struct irq_fwspec *fwspec,
@@ -211,17 +228,17 @@ static int qcom_pdc_alloc(struct irq_domain *domain, unsigned int virq,
 
 	ret = qcom_pdc_translate(domain, fwspec, &hwirq, &type);
 	if (ret)
-		return -EINVAL;
-
-	parent_hwirq = get_parent_hwirq(hwirq);
-	if (parent_hwirq == ~0UL)
-		return -EINVAL;
+		return ret;
 
 	ret  = irq_domain_set_hwirq_and_chip(domain, virq, hwirq,
 					     &qcom_pdc_gic_chip, NULL);
 	if (ret)
 		return ret;
 
+	parent_hwirq = get_parent_hwirq(hwirq);
+	if (parent_hwirq == PDC_NO_PARENT_IRQ)
+		return 0;
+
 	if (type & IRQ_TYPE_EDGE_BOTH)
 		type = IRQ_TYPE_EDGE_RISING;
 
@@ -244,6 +261,60 @@ static const struct irq_domain_ops qcom_pdc_ops = {
 	.free		= irq_domain_free_irqs_common,
 };
 
+static int qcom_pdc_gpio_alloc(struct irq_domain *domain, unsigned int virq,
+			       unsigned int nr_irqs, void *data)
+{
+	struct irq_fwspec *fwspec = data;
+	struct irq_fwspec parent_fwspec;
+	irq_hw_number_t hwirq, parent_hwirq;
+	unsigned int type;
+	int ret;
+
+	ret = qcom_pdc_translate(domain, fwspec, &hwirq, &type);
+	if (ret)
+		return ret;
+
+	ret = irq_domain_set_hwirq_and_chip(domain, virq, hwirq,
+					    &qcom_pdc_gic_chip, NULL);
+	if (ret)
+		return ret;
+
+	if (hwirq == GPIO_NO_WAKE_IRQ)
+		return 0;
+
+	parent_hwirq = get_parent_hwirq(hwirq);
+	if (parent_hwirq == PDC_NO_PARENT_IRQ)
+		return 0;
+
+	if (type & IRQ_TYPE_EDGE_BOTH)
+		type = IRQ_TYPE_EDGE_RISING;
+
+	if (type & IRQ_TYPE_LEVEL_MASK)
+		type = IRQ_TYPE_LEVEL_HIGH;
+
+	parent_fwspec.fwnode      = domain->parent->fwnode;
+	parent_fwspec.param_count = 3;
+	parent_fwspec.param[0]    = 0;
+	parent_fwspec.param[1]    = parent_hwirq;
+	parent_fwspec.param[2]    = type;
+
+	return irq_domain_alloc_irqs_parent(domain, virq, nr_irqs,
+					    &parent_fwspec);
+}
+
+static int qcom_pdc_gpio_domain_select(struct irq_domain *d,
+				       struct irq_fwspec *fwspec,
+				       enum irq_domain_bus_token bus_token)
+{
+	return bus_token == DOMAIN_BUS_WAKEUP;
+}
+
+static const struct irq_domain_ops qcom_pdc_gpio_ops = {
+	.select		= qcom_pdc_gpio_domain_select,
+	.alloc		= qcom_pdc_gpio_alloc,
+	.free		= irq_domain_free_irqs_common,
+};
+
 static int pdc_setup_pin_mapping(struct device_node *np)
 {
 	int ret, n;
@@ -282,7 +353,7 @@ static int pdc_setup_pin_mapping(struct device_node *np)
 
 static int qcom_pdc_init(struct device_node *node, struct device_node *parent)
 {
-	struct irq_domain *parent_domain, *pdc_domain;
+	struct irq_domain *parent_domain, *pdc_domain, *pdc_gpio_domain;
 	int ret;
 
 	pdc_base = of_iomap(node, 0);
@@ -313,8 +384,23 @@ static int qcom_pdc_init(struct device_node *node, struct device_node *parent)
 		goto fail;
 	}
 
+	pdc_gpio_domain = irq_domain_create_hierarchy(parent_domain,
+						      IRQ_DOMAIN_FLAG_QCOM_PDC_WAKEUP,
+						      PDC_MAX_GPIO_IRQS,
+						      of_fwnode_handle(node),
+						      &qcom_pdc_gpio_ops, NULL);
+	if (!pdc_gpio_domain) {
+		pr_err("%pOF: PDC domain add failed for GPIO domain\n", node);
+		ret = -ENOMEM;
+		goto remove;
+	}
+
+	irq_domain_update_bus_token(pdc_gpio_domain, DOMAIN_BUS_WAKEUP);
+
 	return 0;
 
+remove:
+	irq_domain_remove(pdc_domain);
 fail:
 	kfree(pdc_region);
 	iounmap(pdc_base);
diff --git a/include/linux/soc/qcom/irq.h b/include/linux/soc/qcom/irq.h
new file mode 100644
index 0000000..85ac4b6
--- /dev/null
+++ b/include/linux/soc/qcom/irq.h
@@ -0,0 +1,19 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+
+#ifndef __QCOM_IRQ_H
+#define __QCOM_IRQ_H
+
+#define GPIO_NO_WAKE_IRQ	~0U
+
+/**
+ * QCOM specific IRQ domain flags that distinguishes the handling of wakeup
+ * capable interrupts by different interrupt controllers.
+ *
+ * IRQ_DOMAIN_FLAG_QCOM_PDC_WAKEUP: Line must be masked at TLMM and the
+ *                                  interrupt configuration is done at PDC
+ * IRQ_DOMAIN_FLAG_QCOM_MPM_WAKEUP: Interrupt configuration is handled at TLMM
+ */
+#define IRQ_DOMAIN_FLAG_QCOM_PDC_WAKEUP		(IRQ_DOMAIN_FLAG_NONCORE << 0)
+#define IRQ_DOMAIN_FLAG_QCOM_MPM_WAKEUP		(IRQ_DOMAIN_FLAG_NONCORE << 1)
+
+#endif
-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project


  parent reply	other threads:[~2019-09-13 21:59 UTC|newest]

Thread overview: 32+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-09-13 21:59 [PATCH RFC v2 00/14] Support wakeup capable GPIOs Lina Iyer
2019-09-13 21:59 ` [PATCH RFC v2 01/14] irqdomain: add bus token DOMAIN_BUS_WAKEUP Lina Iyer
2019-09-13 21:59 ` [PATCH RFC v2 02/14] drivers: irqchip: qcom-pdc: update max PDC interrupts Lina Iyer
2019-09-13 21:59 ` [PATCH RFC v2 03/14] drivers: irqchip: pdc: Do not toggle IRQ_ENABLE during mask/unmask Lina Iyer
2019-09-13 21:59 ` Lina Iyer [this message]
2019-11-08 21:21   ` [PATCH RFC v2 04/14] drivers: irqchip: add PDC irqdomain for wakeup capable GPIOs Doug Anderson
2019-11-08 21:54     ` Lina Iyer
2019-11-08 22:16       ` Lina Iyer
2019-11-08 22:57         ` Doug Anderson
2019-11-08 23:14           ` Lina Iyer
2019-09-13 21:59 ` [PATCH RFC v2 05/14] of: irq: document properties for wakeup interrupt parent Lina Iyer
2019-10-03 12:02   ` Linus Walleij
2019-11-08 21:29   ` Doug Anderson
2019-09-13 21:59 ` [PATCH RFC v2 06/14] dt-bindings/interrupt-controller: pdc: add SPI config register Lina Iyer
2019-09-30 22:14   ` Rob Herring
2019-09-30 22:33   ` Stephen Boyd
2019-10-16  6:27     ` Stephen Boyd
2019-11-05 20:58       ` Lina Iyer
2019-11-06  0:53         ` Stephen Boyd
2019-11-11 18:37           ` Lina Iyer
2019-11-12 11:52             ` Marc Zyngier
2019-09-13 21:59 ` [PATCH RFC v2 07/14] drivers: irqchip: pdc: additionally set type in SPI config registers Lina Iyer
2019-09-13 21:59 ` [PATCH RFC v2 08/14] genirq: Introduce irq_chip_get/set_parent_state calls Lina Iyer
2019-09-13 21:59 ` [PATCH RFC v2 09/14] drivers: irqchip: pdc: Add irqchip set/get state calls Lina Iyer
2019-09-13 21:59 ` [PATCH RFC v2 10/14] drivers: pinctrl: msm: setup GPIO chip in hierarchy Lina Iyer
2019-10-03 12:17   ` Linus Walleij
2019-11-13 18:35     ` Lina Iyer
2019-09-13 21:59 ` [PATCH RFC v2 11/14] drivers: pinctrl: sdm845: add PDC wakeup interrupt map for GPIOs Lina Iyer
2019-10-03 12:18   ` Linus Walleij
2019-09-13 21:59 ` [PATCH RFC v2 12/14] arm64: dts: qcom: add PDC interrupt controller for SDM845 Lina Iyer
2019-09-13 21:59 ` [PATCH RFC v2 13/14] arm64: dts: qcom: setup PDC as the wakeup parent for TLMM on SDM845 Lina Iyer
2019-09-13 21:59 ` [PATCH RFC v2 14/14] arm64: defconfig: enable PDC interrupt controller for Qualcomm SDM845 Lina Iyer

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1568411962-1022-5-git-send-email-ilina@codeaurora.org \
    --to=ilina@codeaurora.org \
    --cc=bjorn.andersson@linaro.org \
    --cc=evgreen@chromium.org \
    --cc=linus.walleij@linaro.org \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-gpio@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=maz@kernel.org \
    --cc=mkshah@codeaurora.org \
    --cc=swboyd@chromium.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).