* [PATCH 0/1] Add device node support for TSENS.
@ 2019-11-01 12:08 Rajeshwari
2019-11-01 12:08 ` [PATCH 1/1] arm64: dts: qcom: sc7180: Add device node support for TSENS in SC7180 Rajeshwari
0 siblings, 1 reply; 4+ messages in thread
From: Rajeshwari @ 2019-11-01 12:08 UTC (permalink / raw)
To: Andy Gross, Rob Herring, Mark Rutland
Cc: linux-arm-msm, devicetree, linux-kernel, sivaa, sanm, Rajeshwari
Add TSENS node and user thermal zone configurations for TSENS sensors
in SC7180.
The change has dependency on adding device tree support for sc7180 [1]
to merge first.
Dependencies:
[1] https://lkml.org/lkml/2019/10/23/223
Rajeshwari (1):
arm64: dts: qcom: sc7180: Add device node support for TSENS in SC7180
arch/arm64/boot/dts/qcom/sc7180.dtsi | 518 +++++++++++++++++++++++++++++++++++
1 file changed, 518 insertions(+)
--
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member
of Code Aurora Forum, hosted by The Linux Foundation
^ permalink raw reply [flat|nested] 4+ messages in thread
* [PATCH 1/1] arm64: dts: qcom: sc7180: Add device node support for TSENS in SC7180
2019-11-01 12:08 [PATCH 0/1] Add device node support for TSENS Rajeshwari
@ 2019-11-01 12:08 ` Rajeshwari
2019-11-04 21:44 ` Stephen Boyd
0 siblings, 1 reply; 4+ messages in thread
From: Rajeshwari @ 2019-11-01 12:08 UTC (permalink / raw)
To: Andy Gross, Rob Herring, Mark Rutland
Cc: linux-arm-msm, devicetree, linux-kernel, sivaa, sanm, Rajeshwari
Add TSENS node and user thermal zone configurations for TSENS sensors in SC7180.
Signed-off-by: Rajeshwari <rkambl@codeaurora.org>
---
arch/arm64/boot/dts/qcom/sc7180.dtsi | 518 +++++++++++++++++++++++++++++++++++
1 file changed, 518 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/sc7180.dtsi b/arch/arm64/boot/dts/qcom/sc7180.dtsi
index 07ea393..06ded1d 100644
--- a/arch/arm64/boot/dts/qcom/sc7180.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7180.dtsi
@@ -238,6 +238,22 @@
};
};
+ tsens0: thermal-sensor@c263000 {
+ compatible = "qcom,sc7180-tsens","qcom,tsens-v2";
+ reg = <0 0x0c263000 0 0x1ff>, /* TM */
+ <0 0x0c222000 0 0x1ff>; /* SROT */
+ #qcom,sensors = <15>;
+ #thermal-sensor-cells = <1>;
+ };
+
+ tsens1: thermal-sensor@c265000 {
+ compatible = "qcom,sc7180-tsens","qcom,tsens-v2";
+ reg = <0 0x0c265000 0 0x1ff>, /* TM */
+ <0 0x0c223000 0 0x1ff>; /* SROT */
+ #qcom,sensors = <10>;
+ #thermal-sensor-cells = <1>;
+ };
+
spmi_bus: spmi@c440000 {
compatible = "qcom,spmi-pmic-arb";
reg = <0 0xc440000 0 0x1100>,
@@ -449,6 +465,508 @@
};
};
+ thermal-zones {
+ aoss-0-usr {
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+ thermal-governor = "user_space";
+ thermal-sensors = <&tsens0 0>;
+ wake-capable-sensor;
+ trips {
+ active-config0 {
+ temperature = <125000>;
+ hysteresis = <1000>;
+ type = "passive";
+ };
+ reset-mon-cfg {
+ temperature = <115000>;
+ hysteresis = <5000>;
+ type = "passive";
+ };
+ };
+ };
+
+ cpu-0-0-usr {
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+ thermal-governor = "user_space";
+ thermal-sensors = <&tsens0 1>;
+ wake-capable-sensor;
+ trips {
+ active-config0 {
+ temperature = <125000>;
+ hysteresis = <1000>;
+ type = "passive";
+ };
+ reset-mon-cfg {
+ temperature = <115000>;
+ hysteresis = <5000>;
+ type = "passive";
+ };
+ };
+ };
+
+ cpu-0-1-usr {
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+ thermal-governor = "user_space";
+ thermal-sensors = <&tsens0 2>;
+ wake-capable-sensor;
+ trips {
+ active-config0 {
+ temperature = <125000>;
+ hysteresis = <1000>;
+ type = "passive";
+ };
+ reset-mon-cfg {
+ temperature = <115000>;
+ hysteresis = <5000>;
+ type = "passive";
+ };
+ };
+ };
+
+ cpu-0-2-usr {
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+ thermal-governor = "user_space";
+ thermal-sensors = <&tsens0 3>;
+ wake-capable-sensor;
+ trips {
+ active-config0 {
+ temperature = <125000>;
+ hysteresis = <1000>;
+ type = "passive";
+ };
+ reset-mon-cfg {
+ temperature = <115000>;
+ hysteresis = <5000>;
+ type = "passive";
+ };
+ };
+ };
+
+ cpu-0-3-usr {
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+ thermal-sensors = <&tsens0 4>;
+ thermal-governor = "user_space";
+ wake-capable-sensor;
+ trips {
+ active-config0 {
+ temperature = <125000>;
+ hysteresis = <1000>;
+ type = "passive";
+ };
+ reset-mon-cfg {
+ temperature = <115000>;
+ hysteresis = <5000>;
+ type = "passive";
+ };
+ };
+ };
+
+ cpu-0-4-usr {
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+ thermal-sensors = <&tsens0 5>;
+ thermal-governor = "user_space";
+ wake-capable-sensor;
+ trips {
+ active-config0 {
+ temperature = <125000>;
+ hysteresis = <1000>;
+ type = "passive";
+ };
+ reset-mon-cfg {
+ temperature = <115000>;
+ hysteresis = <5000>;
+ type = "passive";
+ };
+ };
+ };
+
+ cpu-0-5-usr {
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+ thermal-sensors = <&tsens0 6>;
+ thermal-governor = "user_space";
+ wake-capable-sensor;
+ trips {
+ active-config0 {
+ temperature = <125000>;
+ hysteresis = <1000>;
+ type = "passive";
+ };
+ reset-mon-cfg {
+ temperature = <115000>;
+ hysteresis = <5000>;
+ type = "passive";
+ };
+ };
+ };
+
+ cpuss-0-usr {
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+ thermal-sensors = <&tsens0 7>;
+ thermal-governor = "user_space";
+ wake-capable-sensor;
+ trips {
+ active-config0 {
+ temperature = <125000>;
+ hysteresis = <1000>;
+ type = "passive";
+ };
+ reset-mon-cfg {
+ temperature = <115000>;
+ hysteresis = <5000>;
+ type = "passive";
+ };
+ };
+ };
+
+ cpuss-1-usr {
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+ thermal-sensors = <&tsens0 8>;
+ thermal-governor = "user_space";
+ wake-capable-sensor;
+ trips {
+ active-config0 {
+ temperature = <125000>;
+ hysteresis = <1000>;
+ type = "passive";
+ };
+ reset-mon-cfg {
+ temperature = <115000>;
+ hysteresis = <5000>;
+ type = "passive";
+ };
+ };
+ };
+
+ cpu-1-0-usr {
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+ thermal-sensors = <&tsens0 9>;
+ thermal-governor = "user_space";
+ wake-capable-sensor;
+ trips {
+ active-config0 {
+ temperature = <125000>;
+ hysteresis = <1000>;
+ type = "passive";
+ };
+ reset-mon-cfg {
+ temperature = <115000>;
+ hysteresis = <5000>;
+ type = "passive";
+ };
+ };
+ };
+
+ cpu-1-1-usr {
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+ thermal-sensors = <&tsens0 10>;
+ thermal-governor = "user_space";
+ wake-capable-sensor;
+ trips {
+ active-config0 {
+ temperature = <125000>;
+ hysteresis = <1000>;
+ type = "passive";
+ };
+ reset-mon-cfg {
+ temperature = <115000>;
+ hysteresis = <5000>;
+ type = "passive";
+ };
+ };
+ };
+
+ cpu-1-2-usr {
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+ thermal-sensors = <&tsens0 11>;
+ thermal-governor = "user_space";
+ wake-capable-sensor;
+ trips {
+ active-config0 {
+ temperature = <125000>;
+ hysteresis = <1000>;
+ type = "passive";
+ };
+ reset-mon-cfg {
+ temperature = <115000>;
+ hysteresis = <5000>;
+ type = "passive";
+ };
+ };
+ };
+
+ cpu-1-3-usr {
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+ thermal-sensors = <&tsens0 12>;
+ thermal-governor = "user_space";
+ wake-capable-sensor;
+ trips {
+ active-config0 {
+ temperature = <125000>;
+ hysteresis = <1000>;
+ type = "passive";
+ };
+ reset-mon-cfg {
+ temperature = <115000>;
+ hysteresis = <5000>;
+ type = "passive";
+ };
+ };
+ };
+
+ gpuss-0-usr {
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+ thermal-sensors = <&tsens0 13>;
+ thermal-governor = "user_space";
+ wake-capable-sensor;
+ trips {
+ active-config0 {
+ temperature = <125000>;
+ hysteresis = <1000>;
+ type = "passive";
+ };
+ reset-mon-cfg {
+ temperature = <115000>;
+ hysteresis = <5000>;
+ type = "passive";
+ };
+ };
+ };
+
+ gpuss-1-usr {
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+ thermal-sensors = <&tsens0 14>;
+ thermal-governor = "user_space";
+ wake-capable-sensor;
+ trips {
+ active-config0 {
+ temperature = <125000>;
+ hysteresis = <1000>;
+ type = "passive";
+ };
+ reset-mon-cfg {
+ temperature = <115000>;
+ hysteresis = <5000>;
+ type = "passive";
+ };
+ };
+ };
+
+ aoss-1-usr {
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+ thermal-sensors = <&tsens1 0>;
+ thermal-governor = "user_space";
+ wake-capable-sensor;
+ trips {
+ active-config0 {
+ temperature = <125000>;
+ hysteresis = <1000>;
+ type = "passive";
+ };
+ reset-mon-cfg {
+ temperature = <115000>;
+ hysteresis = <5000>;
+ type = "passive";
+ };
+ };
+ };
+
+ cwlan-usr {
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+ thermal-sensors = <&tsens1 1>;
+ thermal-governor = "user_space";
+ wake-capable-sensor;
+ trips {
+ active-config0 {
+ temperature = <125000>;
+ hysteresis = <1000>;
+ type = "passive";
+ };
+ reset-mon-cfg {
+ temperature = <115000>;
+ hysteresis = <5000>;
+ type = "passive";
+ };
+ };
+ };
+
+ audio-usr {
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+ thermal-sensors = <&tsens1 2>;
+ thermal-governor = "user_space";
+ wake-capable-sensor;
+ trips {
+ active-config0 {
+ temperature = <125000>;
+ hysteresis = <1000>;
+ type = "passive";
+ };
+ reset-mon-cfg {
+ temperature = <115000>;
+ hysteresis = <5000>;
+ type = "passive";
+ };
+ };
+ };
+
+ ddr-usr {
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+ thermal-sensors = <&tsens1 3>;
+ thermal-governor = "user_space";
+ wake-capable-sensor;
+ trips {
+ ative-config0 {
+ temperature = <125000>;
+ hysteresis = <1000>;
+ type = "passive";
+ };
+ reset-mon-cfg {
+ temperature = <115000>;
+ hysteresis = <5000>;
+ type = "passive";
+ };
+ };
+ };
+
+ q6-hvx-usr {
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+ thermal-sensors = <&tsens1 4>;
+ thermal-governor = "user_space";
+ wake-capable-sensor;
+ trips {
+ active-config0 {
+ temperature = <125000>;
+ hysteresis = <1000>;
+ type = "passive";
+ };
+ reset-mon-cfg {
+ temperature = <115000>;
+ hysteresis = <5000>;
+ type = "passive";
+ };
+ };
+ };
+
+ camera-usr {
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+ thermal-sensors = <&tsens1 5>;
+ thermal-governor = "user_space";
+ wake-capable-sensor;
+ trips {
+ active-config0 {
+ temperature = <125000>;
+ hysteresis = <1000>;
+ type = "passive";
+ };
+ reset-mon-cfg {
+ temperature = <115000>;
+ hysteresis = <5000>;
+ type = "passive";
+ };
+ };
+ };
+
+ mdm-core-usr {
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+ thermal-sensors = <&tsens1 6>;
+ thermal-governor = "user_space";
+ wake-capable-sensor;
+ trips {
+ active-config0 {
+ temperature = <125000>;
+ hysteresis = <1000>;
+ type = "passive";
+ };
+ reset-mon-cfg {
+ temperature = <115000>;
+ hysteresis = <5000>;
+ type = "passive";
+ };
+ };
+ };
+
+ mdm-dsp-usr {
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+ thermal-sensors = <&tsens1 7>;
+ thermal-governor = "user_space";
+ wake-capable-sensor;
+ trips {
+ active-config0 {
+ temperature = <125000>;
+ hysteresis = <1000>;
+ type = "passive";
+ };
+ reset-mon-cfg {
+ temperature = <115000>;
+ hysteresis = <5000>;
+ type = "passive";
+ };
+ };
+ };
+
+ npu-usr {
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+ thermal-sensors = <&tsens1 8>;
+ thermal-governor = "user_space";
+ wake-capable-sensor;
+ trips {
+ active-config0 {
+ temperature = <125000>;
+ hysteresis = <1000>;
+ type = "passive";
+ };
+ reset-mon-cfg {
+ temperature = <115000>;
+ hysteresis = <5000>;
+ type = "passive";
+ };
+ };
+ };
+
+ video-usr {
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+ thermal-sensors = <&tsens1 9>;
+ thermal-governor = "user_space";
+ wake-capable-sensor;
+ trips {
+ active-config0 {
+ temperature = <125000>;
+ hysteresis = <1000>;
+ type = "passive";
+ };
+ reset-mon-cfg {
+ temperature = <115000>;
+ hysteresis = <5000>;
+ type = "passive";
+ };
+ };
+ };
+ };
+
timer {
compatible = "arm,armv8-timer";
interrupts = <GIC_PPI 1 IRQ_TYPE_LEVEL_LOW>,
--
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member
of Code Aurora Forum, hosted by The Linux Foundation
^ permalink raw reply related [flat|nested] 4+ messages in thread
* Re: [PATCH 1/1] arm64: dts: qcom: sc7180: Add device node support for TSENS in SC7180
2019-11-01 12:08 ` [PATCH 1/1] arm64: dts: qcom: sc7180: Add device node support for TSENS in SC7180 Rajeshwari
@ 2019-11-04 21:44 ` Stephen Boyd
2019-11-05 14:51 ` Amit Kucheria
0 siblings, 1 reply; 4+ messages in thread
From: Stephen Boyd @ 2019-11-04 21:44 UTC (permalink / raw)
To: Andy Gross, Mark Rutland, Rajeshwari, Rob Herring
Cc: linux-arm-msm, devicetree, linux-kernel, sivaa, sanm, Rajeshwari,
Amit Kucheria
Quoting Rajeshwari (2019-11-01 05:08:28)
> diff --git a/arch/arm64/boot/dts/qcom/sc7180.dtsi b/arch/arm64/boot/dts/qcom/sc7180.dtsi
> index 07ea393..06ded1d 100644
> --- a/arch/arm64/boot/dts/qcom/sc7180.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sc7180.dtsi
> @@ -449,6 +465,508 @@
> };
> };
>
> + thermal-zones {
> + aoss-0-usr {
> + polling-delay-passive = <0>;
> + polling-delay = <0>;
Can we get real polling delays instead of 0?
> + thermal-governor = "user_space";
> + thermal-sensors = <&tsens0 0>;
> + wake-capable-sensor;
What is this property?
> + trips {
> + active-config0 {
> + temperature = <125000>;
> + hysteresis = <1000>;
> + type = "passive";
> + };
> + reset-mon-cfg {
> + temperature = <115000>;
> + hysteresis = <5000>;
> + type = "passive";
> + };
> + };
> + };
> +
> + cpu-0-0-usr {
> + polling-delay-passive = <0>;
> + polling-delay = <0>;
> + thermal-governor = "user_space";
What is this property?
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [PATCH 1/1] arm64: dts: qcom: sc7180: Add device node support for TSENS in SC7180
2019-11-04 21:44 ` Stephen Boyd
@ 2019-11-05 14:51 ` Amit Kucheria
0 siblings, 0 replies; 4+ messages in thread
From: Amit Kucheria @ 2019-11-05 14:51 UTC (permalink / raw)
To: Stephen Boyd
Cc: Andy Gross, Mark Rutland, Rajeshwari, Rob Herring, linux-arm-msm,
DTML, Linux Kernel Mailing List, sivaa, sanm
Hi Rajeshwari,
On Tue, Nov 5, 2019 at 3:14 AM Stephen Boyd <swboyd@chromium.org> wrote:
>
> Quoting Rajeshwari (2019-11-01 05:08:28)
> > diff --git a/arch/arm64/boot/dts/qcom/sc7180.dtsi b/arch/arm64/boot/dts/qcom/sc7180.dtsi
> > index 07ea393..06ded1d 100644
> > --- a/arch/arm64/boot/dts/qcom/sc7180.dtsi
> > +++ b/arch/arm64/boot/dts/qcom/sc7180.dtsi
> > @@ -449,6 +465,508 @@
> > };
> > };
> >
> > + thermal-zones {
> > + aoss-0-usr {
> > + polling-delay-passive = <0>;
> > + polling-delay = <0>;
>
> Can we get real polling delays instead of 0?
>
> > + thermal-governor = "user_space";
> > + thermal-sensors = <&tsens0 0>;
> > + wake-capable-sensor;
>
> What is this property?
Downstream property. If you need this, propose changes to the tsens bindings.
> > + trips {
> > + active-config0 {
> > + temperature = <125000>;
> > + hysteresis = <1000>;
> > + type = "passive";
> > + };
> > + reset-mon-cfg {
> > + temperature = <115000>;
> > + hysteresis = <5000>;
> > + type = "passive";
> > + };
> > + };
> > + };
> > +
> > + cpu-0-0-usr {
> > + polling-delay-passive = <0>;
> > + polling-delay = <0>;
> > + thermal-governor = "user_space";
>
> What is this property?
Based on a downstream property that was rejected upstream. Please get rid of it.
Regards,
Amit
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2019-11-05 14:51 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-11-01 12:08 [PATCH 0/1] Add device node support for TSENS Rajeshwari
2019-11-01 12:08 ` [PATCH 1/1] arm64: dts: qcom: sc7180: Add device node support for TSENS in SC7180 Rajeshwari
2019-11-04 21:44 ` Stephen Boyd
2019-11-05 14:51 ` Amit Kucheria
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).