linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
* [PATCH v2 0/4] misc fixes on halt-poll code both KVM and guest
@ 2019-11-06  9:08 Zhenzhong Duan
  2019-11-06  9:08 ` [PATCH v2 1/4] cpuidle-haltpoll: ensure grow start value is nonzero Zhenzhong Duan
                   ` (4 more replies)
  0 siblings, 5 replies; 6+ messages in thread
From: Zhenzhong Duan @ 2019-11-06  9:08 UTC (permalink / raw)
  To: linux-kernel, kvm
  Cc: pbonzini, rkrcmar, rafael.j.wysocki, joao.m.martins, mtosatti,
	Zhenzhong Duan

This patchset tries to fix below issues:

1. Admin could set halt_poll_ns to 0 at runtime to disable poll and kernel
behave just like the generic halt driver. Then If guest_halt_poll_grow_start
is set to 0 and guest_halt_poll_ns set to nonzero later, cpu_halt_poll_us will
never grow beyond 0. The first two patches fix this issue from both kvm and
guest side.

2. guest_halt_poll_grow_start and guest_halt_poll_ns could be adjusted at
runtime by admin, this could make a window where cpu_halt_poll_us jump out
of the boundary. the window could be long in some cases(e.g. guest_halt_poll_grow_start
is bumped and cpu_halt_poll_us is shrinking) The last two patches fix this
issue from both kvm and guest side.

3. The 4th patch also simplifies branch check code.

v2:
Rewrite the patches and drop unnecessory changes

Zhenzhong Duan (4):
  cpuidle-haltpoll: ensure grow start value is nonzero
  KVM: ensure grow start value is nonzero
  cpuidle-haltpoll: ensure cpu_halt_poll_us in right scope
  KVM: ensure vCPU halt_poll_us in right scope

 drivers/cpuidle/governors/haltpoll.c | 50 ++++++++++++++++++++++++-----------
 virt/kvm/kvm_main.c                  | 51 ++++++++++++++++++++++++------------
 2 files changed, 68 insertions(+), 33 deletions(-)

-- 
1.8.3.1


^ permalink raw reply	[flat|nested] 6+ messages in thread

* [PATCH v2 1/4] cpuidle-haltpoll: ensure grow start value is nonzero
  2019-11-06  9:08 [PATCH v2 0/4] misc fixes on halt-poll code both KVM and guest Zhenzhong Duan
@ 2019-11-06  9:08 ` Zhenzhong Duan
  2019-11-06  9:08 ` [PATCH v2 2/4] KVM: " Zhenzhong Duan
                   ` (3 subsequent siblings)
  4 siblings, 0 replies; 6+ messages in thread
From: Zhenzhong Duan @ 2019-11-06  9:08 UTC (permalink / raw)
  To: linux-kernel, kvm
  Cc: pbonzini, rkrcmar, rafael.j.wysocki, joao.m.martins, mtosatti,
	Zhenzhong Duan

dev->poll_limit_ns could be zeroed in certain cases (e.g. by
guest_halt_poll_ns = 0). If guest_halt_poll_grow_start is zero,
dev->poll_limit_ns will never be bigger than zero.

Use param callback to avoid writing zero to guest_halt_poll_grow_start.

Signed-off-by: Zhenzhong Duan <zhenzhong.duan@oracle.com>
---
 drivers/cpuidle/governors/haltpoll.c | 22 +++++++++++++++++++++-
 1 file changed, 21 insertions(+), 1 deletion(-)

diff --git a/drivers/cpuidle/governors/haltpoll.c b/drivers/cpuidle/governors/haltpoll.c
index 7a703d2..660859d 100644
--- a/drivers/cpuidle/governors/haltpoll.c
+++ b/drivers/cpuidle/governors/haltpoll.c
@@ -20,6 +20,26 @@
 #include <linux/module.h>
 #include <linux/kvm_para.h>
 
+static int grow_start_set(const char *val, const struct kernel_param *kp)
+{
+	int ret;
+	unsigned int n;
+
+	if (!val)
+		return -EINVAL;
+
+	ret = kstrtouint(val, 0, &n);
+	if (ret || !n)
+		return -EINVAL;
+
+	return param_set_uint(val, kp);
+}
+
+static const struct kernel_param_ops grow_start_ops = {
+	.set = grow_start_set,
+	.get = param_get_uint,
+};
+
 static unsigned int guest_halt_poll_ns __read_mostly = 200000;
 module_param(guest_halt_poll_ns, uint, 0644);
 
@@ -33,7 +53,7 @@
 
 /* value in us to start growing per-cpu halt_poll_ns */
 static unsigned int guest_halt_poll_grow_start __read_mostly = 50000;
-module_param(guest_halt_poll_grow_start, uint, 0644);
+module_param_cb(guest_halt_poll_grow_start, &grow_start_ops, &guest_halt_poll_grow_start, 0644);
 
 /* allow shrinking guest halt poll */
 static bool guest_halt_poll_allow_shrink __read_mostly = true;
-- 
1.8.3.1


^ permalink raw reply related	[flat|nested] 6+ messages in thread

* [PATCH v2 2/4] KVM: ensure grow start value is nonzero
  2019-11-06  9:08 [PATCH v2 0/4] misc fixes on halt-poll code both KVM and guest Zhenzhong Duan
  2019-11-06  9:08 ` [PATCH v2 1/4] cpuidle-haltpoll: ensure grow start value is nonzero Zhenzhong Duan
@ 2019-11-06  9:08 ` Zhenzhong Duan
  2019-11-06  9:08 ` [PATCH v2 3/4] cpuidle-haltpoll: ensure cpu_halt_poll_us in right scope Zhenzhong Duan
                   ` (2 subsequent siblings)
  4 siblings, 0 replies; 6+ messages in thread
From: Zhenzhong Duan @ 2019-11-06  9:08 UTC (permalink / raw)
  To: linux-kernel, kvm
  Cc: pbonzini, rkrcmar, rafael.j.wysocki, joao.m.martins, mtosatti,
	Zhenzhong Duan

vcpu->halt_poll_ns could be zeroed in certain cases (e.g. by
halt_poll_ns = 0). If halt_poll_grow_start is zero,
vcpu->halt_poll_ns will never be bigger than zero.

Use param callback to avoid writing zero to halt_poll_grow_start.

Signed-off-by: Zhenzhong Duan <zhenzhong.duan@oracle.com>
---
 virt/kvm/kvm_main.c | 22 +++++++++++++++++++++-
 1 file changed, 21 insertions(+), 1 deletion(-)

diff --git a/virt/kvm/kvm_main.c b/virt/kvm/kvm_main.c
index d6f0696..359516b 100644
--- a/virt/kvm/kvm_main.c
+++ b/virt/kvm/kvm_main.c
@@ -69,6 +69,26 @@
 MODULE_AUTHOR("Qumranet");
 MODULE_LICENSE("GPL");
 
+static int grow_start_set(const char *val, const struct kernel_param *kp)
+{
+	int ret;
+	unsigned int n;
+
+	if (!val)
+		return -EINVAL;
+
+	ret = kstrtouint(val, 0, &n);
+	if (ret || !n)
+		return -EINVAL;
+
+	return param_set_uint(val, kp);
+}
+
+static const struct kernel_param_ops grow_start_ops = {
+	.set = grow_start_set,
+	.get = param_get_uint,
+};
+
 /* Architectures should define their poll value according to the halt latency */
 unsigned int halt_poll_ns = KVM_HALT_POLL_NS_DEFAULT;
 module_param(halt_poll_ns, uint, 0644);
@@ -81,7 +101,7 @@
 
 /* The start value to grow halt_poll_ns from */
 unsigned int halt_poll_ns_grow_start = 10000; /* 10us */
-module_param(halt_poll_ns_grow_start, uint, 0644);
+module_param_cb(halt_poll_ns_grow_start, &grow_start_ops, &halt_poll_ns_grow_start, 0644);
 EXPORT_SYMBOL_GPL(halt_poll_ns_grow_start);
 
 /* Default resets per-vcpu halt_poll_ns . */
-- 
1.8.3.1


^ permalink raw reply related	[flat|nested] 6+ messages in thread

* [PATCH v2 3/4] cpuidle-haltpoll: ensure cpu_halt_poll_us in right scope
  2019-11-06  9:08 [PATCH v2 0/4] misc fixes on halt-poll code both KVM and guest Zhenzhong Duan
  2019-11-06  9:08 ` [PATCH v2 1/4] cpuidle-haltpoll: ensure grow start value is nonzero Zhenzhong Duan
  2019-11-06  9:08 ` [PATCH v2 2/4] KVM: " Zhenzhong Duan
@ 2019-11-06  9:08 ` Zhenzhong Duan
  2019-11-06  9:08 ` [PATCH v2 4/4] KVM: ensure vCPU halt_poll_us " Zhenzhong Duan
  2019-11-06 11:05 ` [PATCH v2 0/4] misc fixes on halt-poll code both KVM and guest Rafael J. Wysocki
  4 siblings, 0 replies; 6+ messages in thread
From: Zhenzhong Duan @ 2019-11-06  9:08 UTC (permalink / raw)
  To: linux-kernel, kvm
  Cc: pbonzini, rkrcmar, rafael.j.wysocki, joao.m.martins, mtosatti,
	Zhenzhong Duan

As user can adjust guest_halt_poll_grow_start and guest_halt_poll_ns
which leads to cpu_halt_poll_us beyond the two boundaries. This patch
ensures cpu_halt_poll_us in that scope.

If guest_halt_poll_shrink is 0, shrink the cpu_halt_poll_us to
guest_halt_poll_grow_start instead of 0. To disable poll we can set
guest_halt_poll_ns to 0.

If user wrongly set guest_halt_poll_grow_start > guest_halt_poll_ns > 0,
guest_halt_poll_ns take precedency and poll time is a fixed value of
guest_halt_poll_ns.

Signed-off-by: Zhenzhong Duan <zhenzhong.duan@oracle.com>
---
 drivers/cpuidle/governors/haltpoll.c | 28 +++++++++++++---------------
 1 file changed, 13 insertions(+), 15 deletions(-)

diff --git a/drivers/cpuidle/governors/haltpoll.c b/drivers/cpuidle/governors/haltpoll.c
index 660859d..d0b38b53 100644
--- a/drivers/cpuidle/governors/haltpoll.c
+++ b/drivers/cpuidle/governors/haltpoll.c
@@ -97,32 +97,30 @@ static int haltpoll_select(struct cpuidle_driver *drv,
 
 static void adjust_poll_limit(struct cpuidle_device *dev, unsigned int block_us)
 {
-	unsigned int val;
+	unsigned int val = dev->poll_limit_ns;
 	u64 block_ns = block_us*NSEC_PER_USEC;
 
 	/* Grow cpu_halt_poll_us if
-	 * cpu_halt_poll_us < block_ns < guest_halt_poll_us
+	 * cpu_halt_poll_us < block_ns <= guest_halt_poll_us
 	 */
-	if (block_ns > dev->poll_limit_ns && block_ns <= guest_halt_poll_ns) {
+	if (block_ns > dev->poll_limit_ns && block_ns <= guest_halt_poll_ns &&
+	    guest_halt_poll_grow)
 		val = dev->poll_limit_ns * guest_halt_poll_grow;
-
-		if (val < guest_halt_poll_grow_start)
-			val = guest_halt_poll_grow_start;
-		if (val > guest_halt_poll_ns)
-			val = guest_halt_poll_ns;
-
-		dev->poll_limit_ns = val;
-	} else if (block_ns > guest_halt_poll_ns &&
-		   guest_halt_poll_allow_shrink) {
+	else if (block_ns > guest_halt_poll_ns &&
+			guest_halt_poll_allow_shrink) {
 		unsigned int shrink = guest_halt_poll_shrink;
 
-		val = dev->poll_limit_ns;
 		if (shrink == 0)
-			val = 0;
+			val = guest_halt_poll_grow_start;
 		else
 			val /= shrink;
-		dev->poll_limit_ns = val;
 	}
+	if (val < guest_halt_poll_grow_start)
+		val = guest_halt_poll_grow_start;
+	if (val > guest_halt_poll_ns)
+		val = guest_halt_poll_ns;
+
+	dev->poll_limit_ns = val;
 }
 
 /**
-- 
1.8.3.1


^ permalink raw reply related	[flat|nested] 6+ messages in thread

* [PATCH v2 4/4] KVM: ensure vCPU halt_poll_us in right scope
  2019-11-06  9:08 [PATCH v2 0/4] misc fixes on halt-poll code both KVM and guest Zhenzhong Duan
                   ` (2 preceding siblings ...)
  2019-11-06  9:08 ` [PATCH v2 3/4] cpuidle-haltpoll: ensure cpu_halt_poll_us in right scope Zhenzhong Duan
@ 2019-11-06  9:08 ` Zhenzhong Duan
  2019-11-06 11:05 ` [PATCH v2 0/4] misc fixes on halt-poll code both KVM and guest Rafael J. Wysocki
  4 siblings, 0 replies; 6+ messages in thread
From: Zhenzhong Duan @ 2019-11-06  9:08 UTC (permalink / raw)
  To: linux-kernel, kvm
  Cc: pbonzini, rkrcmar, rafael.j.wysocki, joao.m.martins, mtosatti,
	Zhenzhong Duan

As user can adjust halt_poll_ns_grow_start and halt_poll_ns which
leads to vcpu->halt_poll_ns beyond the two boundaries. This patch
ensures vcpu->halt_poll_ns in that scope after growing or shrinking.

If halt_poll_ns_shrink is 0, shrink vcpu->halt_poll_ns to
halt_poll_ns_grow_start instead of 0. To disable poll we can set
halt_poll_ns to 0.

In case user wrongly set halt_poll_ns_grow_start > halt_poll_ns > 0,
halt_poll_ns take precedency and poll time is a fixed value of
halt_poll_ns.

This patch also simplifies branch check based on the guest haltpoll
code.

Signed-off-by: Zhenzhong Duan <zhenzhong.duan@oracle.com>
---
 virt/kvm/kvm_main.c | 29 +++++++++++++----------------
 1 file changed, 13 insertions(+), 16 deletions(-)

diff --git a/virt/kvm/kvm_main.c b/virt/kvm/kvm_main.c
index 359516b..b4fca66 100644
--- a/virt/kvm/kvm_main.c
+++ b/virt/kvm/kvm_main.c
@@ -2308,9 +2308,15 @@ static void shrink_halt_poll_ns(struct kvm_vcpu *vcpu)
 	old = val = vcpu->halt_poll_ns;
 	shrink = READ_ONCE(halt_poll_ns_shrink);
 	if (shrink == 0)
-		val = 0;
-	else
+		val = halt_poll_ns_grow_start;
+	else {
 		val /= shrink;
+		if (val < halt_poll_ns_grow_start)
+			val = halt_poll_ns_grow_start;
+	}
+
+	if (val > halt_poll_ns)
+		val = halt_poll_ns;
 
 	vcpu->halt_poll_ns = val;
 	trace_kvm_halt_poll_ns_shrink(vcpu->vcpu_id, val, old);
@@ -2385,21 +2391,12 @@ void kvm_vcpu_block(struct kvm_vcpu *vcpu)
 	block_ns = ktime_to_ns(cur) - ktime_to_ns(start);
 
 	if (!kvm_arch_no_poll(vcpu)) {
-		if (!vcpu_valid_wakeup(vcpu)) {
+		/* we had a long block, shrink polling */
+		if (!vcpu_valid_wakeup(vcpu) || block_ns > halt_poll_ns)
 			shrink_halt_poll_ns(vcpu);
-		} else if (halt_poll_ns) {
-			if (block_ns <= vcpu->halt_poll_ns)
-				;
-			/* we had a long block, shrink polling */
-			else if (vcpu->halt_poll_ns && block_ns > halt_poll_ns)
-				shrink_halt_poll_ns(vcpu);
-			/* we had a short halt and our poll time is too small */
-			else if (vcpu->halt_poll_ns < halt_poll_ns &&
-				block_ns < halt_poll_ns)
-				grow_halt_poll_ns(vcpu);
-		} else {
-			vcpu->halt_poll_ns = 0;
-		}
+		/* we had a short block and our poll time is too small */
+		else if (block_ns > vcpu->halt_poll_ns)
+			grow_halt_poll_ns(vcpu);
 	}
 
 	trace_kvm_vcpu_wakeup(block_ns, waited, vcpu_valid_wakeup(vcpu));
-- 
1.8.3.1


^ permalink raw reply related	[flat|nested] 6+ messages in thread

* Re: [PATCH v2 0/4] misc fixes on halt-poll code both KVM and guest
  2019-11-06  9:08 [PATCH v2 0/4] misc fixes on halt-poll code both KVM and guest Zhenzhong Duan
                   ` (3 preceding siblings ...)
  2019-11-06  9:08 ` [PATCH v2 4/4] KVM: ensure vCPU halt_poll_us " Zhenzhong Duan
@ 2019-11-06 11:05 ` Rafael J. Wysocki
  4 siblings, 0 replies; 6+ messages in thread
From: Rafael J. Wysocki @ 2019-11-06 11:05 UTC (permalink / raw)
  To: Zhenzhong Duan, linux-kernel, kvm
  Cc: pbonzini, rkrcmar, joao.m.martins, mtosatti

On 11/6/2019 10:08 AM, Zhenzhong Duan wrote:
> This patchset tries to fix below issues:
>
> 1. Admin could set halt_poll_ns to 0 at runtime to disable poll and kernel
> behave just like the generic halt driver. Then If guest_halt_poll_grow_start
> is set to 0 and guest_halt_poll_ns set to nonzero later, cpu_halt_poll_us will
> never grow beyond 0. The first two patches fix this issue from both kvm and
> guest side.
>
> 2. guest_halt_poll_grow_start and guest_halt_poll_ns could be adjusted at
> runtime by admin, this could make a window where cpu_halt_poll_us jump out
> of the boundary. the window could be long in some cases(e.g. guest_halt_poll_grow_start
> is bumped and cpu_halt_poll_us is shrinking) The last two patches fix this
> issue from both kvm and guest side.
>
> 3. The 4th patch also simplifies branch check code.
>
> v2:
> Rewrite the patches and drop unnecessory changes
>
> Zhenzhong Duan (4):
>    cpuidle-haltpoll: ensure grow start value is nonzero
>    KVM: ensure grow start value is nonzero
>    cpuidle-haltpoll: ensure cpu_halt_poll_us in right scope
>    KVM: ensure vCPU halt_poll_us in right scope
>
>   drivers/cpuidle/governors/haltpoll.c | 50 ++++++++++++++++++++++++-----------
>   virt/kvm/kvm_main.c                  | 51 ++++++++++++++++++++++++------------
>   2 files changed, 68 insertions(+), 33 deletions(-)
>
Please resend the series with CCs to linux-pm@vger.kernel.org, thanks!



^ permalink raw reply	[flat|nested] 6+ messages in thread

end of thread, other threads:[~2019-11-06 11:06 UTC | newest]

Thread overview: 6+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-11-06  9:08 [PATCH v2 0/4] misc fixes on halt-poll code both KVM and guest Zhenzhong Duan
2019-11-06  9:08 ` [PATCH v2 1/4] cpuidle-haltpoll: ensure grow start value is nonzero Zhenzhong Duan
2019-11-06  9:08 ` [PATCH v2 2/4] KVM: " Zhenzhong Duan
2019-11-06  9:08 ` [PATCH v2 3/4] cpuidle-haltpoll: ensure cpu_halt_poll_us in right scope Zhenzhong Duan
2019-11-06  9:08 ` [PATCH v2 4/4] KVM: ensure vCPU halt_poll_us " Zhenzhong Duan
2019-11-06 11:05 ` [PATCH v2 0/4] misc fixes on halt-poll code both KVM and guest Rafael J. Wysocki

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).