* [PATCH 1/2] ARM: dts: imx7d-sdb-reva: Add revision in board compatible string
@ 2019-11-07 2:14 Anson Huang
2019-11-07 2:14 ` [PATCH 2/2] dt-bindings: arm: imx: Add the i.MX7D-SDB Rev-A board Anson Huang
2019-12-04 9:05 ` [PATCH 1/2] ARM: dts: imx7d-sdb-reva: Add revision in board compatible string Shawn Guo
0 siblings, 2 replies; 4+ messages in thread
From: Anson Huang @ 2019-11-07 2:14 UTC (permalink / raw)
To: robh+dt, mark.rutland, shawnguo, s.hauer, kernel, festevam,
manivannan.sadhasivam, andrew.smirnov, marcel.ziswiler,
sebastien.szymanski, devicetree, linux-kernel, linux-arm-kernel
Cc: Linux-imx
i.MX7D SDB Rev-A board should use its own board compatible
string instead of default i.MX7D SDB board.
Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
---
arch/arm/boot/dts/imx7d-sdb-reva.dts | 3 +++
1 file changed, 3 insertions(+)
diff --git a/arch/arm/boot/dts/imx7d-sdb-reva.dts b/arch/arm/boot/dts/imx7d-sdb-reva.dts
index 7ce9d8c..cabdaa6 100644
--- a/arch/arm/boot/dts/imx7d-sdb-reva.dts
+++ b/arch/arm/boot/dts/imx7d-sdb-reva.dts
@@ -7,6 +7,9 @@
#include "imx7d-sdb.dts"
/ {
+ model = "Freescale i.MX7 SabreSD RevA Board";
+ compatible = "fsl,imx7d-sdb-reva", "fsl,imx7d";
+
reg_usb_otg2_vbus: regulator-usb-otg2-vbus {
pinctrl-0 = <&pinctrl_usb_otg2_vbus_reg_reva>;
gpio = <&gpio4 7 GPIO_ACTIVE_HIGH>;
--
2.7.4
^ permalink raw reply related [flat|nested] 4+ messages in thread
* [PATCH 2/2] dt-bindings: arm: imx: Add the i.MX7D-SDB Rev-A board
2019-11-07 2:14 [PATCH 1/2] ARM: dts: imx7d-sdb-reva: Add revision in board compatible string Anson Huang
@ 2019-11-07 2:14 ` Anson Huang
2019-11-13 13:25 ` Rob Herring
2019-12-04 9:05 ` [PATCH 1/2] ARM: dts: imx7d-sdb-reva: Add revision in board compatible string Shawn Guo
1 sibling, 1 reply; 4+ messages in thread
From: Anson Huang @ 2019-11-07 2:14 UTC (permalink / raw)
To: robh+dt, mark.rutland, shawnguo, s.hauer, kernel, festevam,
manivannan.sadhasivam, andrew.smirnov, marcel.ziswiler,
sebastien.szymanski, devicetree, linux-kernel, linux-arm-kernel
Cc: Linux-imx
Add board binding for i.MX7D-SDB Rev-A board which is already
supported.
Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
---
Documentation/devicetree/bindings/arm/fsl.yaml | 1 +
1 file changed, 1 insertion(+)
diff --git a/Documentation/devicetree/bindings/arm/fsl.yaml b/Documentation/devicetree/bindings/arm/fsl.yaml
index a41d9e00..70ceeac 100644
--- a/Documentation/devicetree/bindings/arm/fsl.yaml
+++ b/Documentation/devicetree/bindings/arm/fsl.yaml
@@ -241,6 +241,7 @@ properties:
items:
- enum:
- fsl,imx7d-sdb # i.MX7 SabreSD Board
+ - fsl,imx7d-sdb-reva # i.MX7 SabreSD Rev-A Board
- novtech,imx7d-meerkat96 # i.MX7 Meerkat96 Board
- toradex,colibri-imx7d # Colibri iMX7 Dual Module
- toradex,colibri-imx7d-emmc # Colibri iMX7 Dual 1GB (eMMC) Module
--
2.7.4
^ permalink raw reply related [flat|nested] 4+ messages in thread
* Re: [PATCH 2/2] dt-bindings: arm: imx: Add the i.MX7D-SDB Rev-A board
2019-11-07 2:14 ` [PATCH 2/2] dt-bindings: arm: imx: Add the i.MX7D-SDB Rev-A board Anson Huang
@ 2019-11-13 13:25 ` Rob Herring
0 siblings, 0 replies; 4+ messages in thread
From: Rob Herring @ 2019-11-13 13:25 UTC (permalink / raw)
To: Anson Huang
Cc: robh+dt, mark.rutland, shawnguo, s.hauer, kernel, festevam,
manivannan.sadhasivam, andrew.smirnov, marcel.ziswiler,
sebastien.szymanski, devicetree, linux-kernel, linux-arm-kernel,
Linux-imx
On Thu, 7 Nov 2019 10:14:53 +0800, Anson Huang wrote:
> Add board binding for i.MX7D-SDB Rev-A board which is already
> supported.
>
> Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
> ---
> Documentation/devicetree/bindings/arm/fsl.yaml | 1 +
> 1 file changed, 1 insertion(+)
>
Acked-by: Rob Herring <robh@kernel.org>
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [PATCH 1/2] ARM: dts: imx7d-sdb-reva: Add revision in board compatible string
2019-11-07 2:14 [PATCH 1/2] ARM: dts: imx7d-sdb-reva: Add revision in board compatible string Anson Huang
2019-11-07 2:14 ` [PATCH 2/2] dt-bindings: arm: imx: Add the i.MX7D-SDB Rev-A board Anson Huang
@ 2019-12-04 9:05 ` Shawn Guo
1 sibling, 0 replies; 4+ messages in thread
From: Shawn Guo @ 2019-12-04 9:05 UTC (permalink / raw)
To: Anson Huang
Cc: robh+dt, mark.rutland, s.hauer, kernel, festevam,
manivannan.sadhasivam, andrew.smirnov, marcel.ziswiler,
sebastien.szymanski, devicetree, linux-kernel, linux-arm-kernel,
Linux-imx
On Thu, Nov 07, 2019 at 10:14:52AM +0800, Anson Huang wrote:
> i.MX7D SDB Rev-A board should use its own board compatible
> string instead of default i.MX7D SDB board.
>
> Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Applied both, thanks.
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2019-12-04 9:05 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-11-07 2:14 [PATCH 1/2] ARM: dts: imx7d-sdb-reva: Add revision in board compatible string Anson Huang
2019-11-07 2:14 ` [PATCH 2/2] dt-bindings: arm: imx: Add the i.MX7D-SDB Rev-A board Anson Huang
2019-11-13 13:25 ` Rob Herring
2019-12-04 9:05 ` [PATCH 1/2] ARM: dts: imx7d-sdb-reva: Add revision in board compatible string Shawn Guo
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).