* [PATCH] arm64: dts: imx8qxp: Remove unnecessary "interrupt-parent" property
@ 2019-11-07 3:30 Anson Huang
2019-12-04 11:22 ` Shawn Guo
0 siblings, 1 reply; 2+ messages in thread
From: Anson Huang @ 2019-11-07 3:30 UTC (permalink / raw)
To: robh+dt, mark.rutland, shawnguo, s.hauer, kernel, festevam,
aisheng.dong, daniel.baluta, peng.fan, fugang.duan, devicetree,
linux-arm-kernel, linux-kernel
Cc: Linux-imx
gic is appointed as default interrupt parent for devices, so no need
to specify it again in device nodes which use it as interrupt parent.
Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
---
arch/arm64/boot/dts/freescale/imx8qxp.dtsi | 12 ------------
1 file changed, 12 deletions(-)
diff --git a/arch/arm64/boot/dts/freescale/imx8qxp.dtsi b/arch/arm64/boot/dts/freescale/imx8qxp.dtsi
index 9646a41..fb5f752 100644
--- a/arch/arm64/boot/dts/freescale/imx8qxp.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8qxp.dtsi
@@ -250,7 +250,6 @@
compatible = "fsl,imx8qxp-lpuart", "fsl,imx7ulp-lpuart";
reg = <0x5a060000 0x1000>;
interrupts = <GIC_SPI 225 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-parent = <&gic>;
clocks = <&adma_lpcg IMX_ADMA_LPCG_UART0_IPG_CLK>,
<&adma_lpcg IMX_ADMA_LPCG_UART0_BAUD_CLK>;
clock-names = "ipg", "baud";
@@ -262,7 +261,6 @@
compatible = "fsl,imx8qxp-lpuart", "fsl,imx7ulp-lpuart";
reg = <0x5a070000 0x1000>;
interrupts = <GIC_SPI 226 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-parent = <&gic>;
clocks = <&adma_lpcg IMX_ADMA_LPCG_UART1_IPG_CLK>,
<&adma_lpcg IMX_ADMA_LPCG_UART1_BAUD_CLK>;
clock-names = "ipg", "baud";
@@ -274,7 +272,6 @@
compatible = "fsl,imx8qxp-lpuart", "fsl,imx7ulp-lpuart";
reg = <0x5a080000 0x1000>;
interrupts = <GIC_SPI 227 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-parent = <&gic>;
clocks = <&adma_lpcg IMX_ADMA_LPCG_UART2_IPG_CLK>,
<&adma_lpcg IMX_ADMA_LPCG_UART2_BAUD_CLK>;
clock-names = "ipg", "baud";
@@ -286,7 +283,6 @@
compatible = "fsl,imx8qxp-lpuart", "fsl,imx7ulp-lpuart";
reg = <0x5a090000 0x1000>;
interrupts = <GIC_SPI 228 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-parent = <&gic>;
clocks = <&adma_lpcg IMX_ADMA_LPCG_UART3_IPG_CLK>,
<&adma_lpcg IMX_ADMA_LPCG_UART3_BAUD_CLK>;
clock-names = "ipg", "baud";
@@ -298,7 +294,6 @@
compatible = "fsl,imx8qxp-lpi2c", "fsl,imx7ulp-lpi2c";
reg = <0x5a800000 0x4000>;
interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-parent = <&gic>;
clocks = <&adma_lpcg IMX_ADMA_LPCG_I2C0_CLK>;
clock-names = "per";
assigned-clocks = <&clk IMX_ADMA_I2C0_CLK>;
@@ -311,7 +306,6 @@
compatible = "fsl,imx8qxp-lpi2c", "fsl,imx7ulp-lpi2c";
reg = <0x5a810000 0x4000>;
interrupts = <GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-parent = <&gic>;
clocks = <&adma_lpcg IMX_ADMA_LPCG_I2C1_CLK>;
clock-names = "per";
assigned-clocks = <&clk IMX_ADMA_I2C1_CLK>;
@@ -324,7 +318,6 @@
compatible = "fsl,imx8qxp-lpi2c", "fsl,imx7ulp-lpi2c";
reg = <0x5a820000 0x4000>;
interrupts = <GIC_SPI 222 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-parent = <&gic>;
clocks = <&adma_lpcg IMX_ADMA_LPCG_I2C2_CLK>;
clock-names = "per";
assigned-clocks = <&clk IMX_ADMA_I2C2_CLK>;
@@ -337,7 +330,6 @@
compatible = "fsl,imx8qxp-lpi2c", "fsl,imx7ulp-lpi2c";
reg = <0x5a830000 0x4000>;
interrupts = <GIC_SPI 223 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-parent = <&gic>;
clocks = <&adma_lpcg IMX_ADMA_LPCG_I2C3_CLK>;
clock-names = "per";
assigned-clocks = <&clk IMX_ADMA_I2C3_CLK>;
@@ -361,7 +353,6 @@
usdhc1: mmc@5b010000 {
compatible = "fsl,imx8qxp-usdhc", "fsl,imx7d-usdhc";
- interrupt-parent = <&gic>;
interrupts = <GIC_SPI 232 IRQ_TYPE_LEVEL_HIGH>;
reg = <0x5b010000 0x10000>;
clocks = <&conn_lpcg IMX_CONN_LPCG_SDHC0_IPG_CLK>,
@@ -374,7 +365,6 @@
usdhc2: mmc@5b020000 {
compatible = "fsl,imx8qxp-usdhc", "fsl,imx7d-usdhc";
- interrupt-parent = <&gic>;
interrupts = <GIC_SPI 233 IRQ_TYPE_LEVEL_HIGH>;
reg = <0x5b020000 0x10000>;
clocks = <&conn_lpcg IMX_CONN_LPCG_SDHC1_IPG_CLK>,
@@ -389,7 +379,6 @@
usdhc3: mmc@5b030000 {
compatible = "fsl,imx8qxp-usdhc", "fsl,imx7d-usdhc";
- interrupt-parent = <&gic>;
interrupts = <GIC_SPI 234 IRQ_TYPE_LEVEL_HIGH>;
reg = <0x5b030000 0x10000>;
clocks = <&conn_lpcg IMX_CONN_LPCG_SDHC2_IPG_CLK>,
@@ -446,7 +435,6 @@
ddr-pmu@5c020000 {
compatible = "fsl,imx8-ddr-pmu";
reg = <0x5c020000 0x10000>;
- interrupt-parent = <&gic>;
interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>;
};
};
--
2.7.4
^ permalink raw reply related [flat|nested] 2+ messages in thread
* Re: [PATCH] arm64: dts: imx8qxp: Remove unnecessary "interrupt-parent" property
2019-11-07 3:30 [PATCH] arm64: dts: imx8qxp: Remove unnecessary "interrupt-parent" property Anson Huang
@ 2019-12-04 11:22 ` Shawn Guo
0 siblings, 0 replies; 2+ messages in thread
From: Shawn Guo @ 2019-12-04 11:22 UTC (permalink / raw)
To: Anson Huang
Cc: robh+dt, mark.rutland, s.hauer, kernel, festevam, aisheng.dong,
daniel.baluta, peng.fan, fugang.duan, devicetree,
linux-arm-kernel, linux-kernel, Linux-imx
On Thu, Nov 07, 2019 at 11:30:35AM +0800, Anson Huang wrote:
> gic is appointed as default interrupt parent for devices, so no need
> to specify it again in device nodes which use it as interrupt parent.
>
> Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Applied, thanks.
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2019-12-04 11:22 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-11-07 3:30 [PATCH] arm64: dts: imx8qxp: Remove unnecessary "interrupt-parent" property Anson Huang
2019-12-04 11:22 ` Shawn Guo
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).